For legibility, wrap text paragraphs so every line is at most 70
characters long.
To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3". Finds no
differences. Comparing with diff is not useful, as the refilled
paragraphs are visible there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240322140910.328840-11-armbru@redhat.com>
Drop list markup, since there's just one item left.
Drop "on success" where it is redundant with "Returns:".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-7-armbru@redhat.com>
By convention, we indent the second and subsequent lines of
descriptions and tagged sections, except for examples.
Turn this into a hard rule, and apply it to examples, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-11-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[Straightforward conflicts in qapi/migration.json resolved]
Low-hanging fruit, and except for StatsFilter, the only members of
these unions lacking documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-16-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The conversion of simple to flat unions left the @data members
undocumented. Add documentation where it's trivial. Copy verbatim
from the wrapped type's description where possible.
Leftovers: String (to be taken care of in the next commit), and
TransActionAction (left for another day).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-13-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The description of @bins ends with a literal block:
# @bins: list of io request counts corresponding to histogram
# intervals, one more element than @boundaries has. For the
# example above, @bins may be something like [3, 1, 5, 2], and
# corresponding histogram looks like:
#
# ::
#
# 5| *
Except it actually ends *before* the block: the unindented '::' line
starts a new section. Makes no sense.
We could fix this by indenting the '::' line. Instead, double the
colon at the end of the preceding paragraph, and drop the '::' line.
This shifts the box for the literal block right in generated
documentation, so it lines up with the description.
Fixes: commit a0fcff383b (qapi: Use rST markup for literal blocks)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, enable the ability to choose the block device containing
a detachable LUKS header by adding the 'header' parameter to
BlockdevCreateOptionsLUKS.
Secondly, when formatting the LUKS volume with a detachable header,
truncate the payload volume to length without a header size.
Using the qmp blockdev command, create the LUKS volume with a
detachable header as follows:
1. add the secret to lock/unlock the cipher stored in the
detached LUKS header
$ virsh qemu-monitor-command vm '{"execute":"object-add",
> "arguments":{"qom-type": "secret", "id": "sec0", "data": "foo"}}'
2. create a header img with 0 size
$ virsh qemu-monitor-command vm '{"execute":"blockdev-create",
> "arguments":{"job-id":"job0", "options":{"driver":"file",
> "filename":"/path/to/detached_luks_header.img", "size":0 }}}'
3. add protocol blockdev node for header
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments": {"driver":"file", "filename":
> "/path/to/detached_luks_header.img", "node-name":
> "detached-luks-header-storage"}}'
4. create a payload img with 0 size
$ virsh qemu-monitor-command vm '{"execute":"blockdev-create",
> "arguments":{"job-id":"job1", "options":{"driver":"file",
> "filename":"/path/to/detached_luks_payload_raw.img", "size":0}}}'
5. add protocol blockdev node for payload
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments": {"driver":"file", "filename":
> "/path/to/detached_luks_payload_raw.img", "node-name":
> "luks-payload-raw-storage"}}'
6. do the formatting with 128M size
$ virsh qemu-monitor-command c81_node1 '{"execute":"blockdev-create",
> "arguments":{"job-id":"job2", "options":{"driver":"luks", "header":
> "detached-luks-header-storage", "file":"luks-payload-raw-storage",
> "size":134217728, "preallocation":"full", "key-secret":"sec0" }}}'
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To support detached LUKS header creation, make the existing 'file'
field in BlockdevCreateOptionsLUKS optional.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
By enhancing the LUKS driver, it is possible to implement
the LUKS volume with a detached header.
Normally a LUKS volume has a layout:
disk: | header | key material | disk payload data |
With a detached LUKS header, you need 2 disks so getting:
disk1: | header | key material |
disk2: | disk payload data |
There are a variety of benefits to doing this:
* Secrecy - the disk2 cannot be identified as containing LUKS
volume since there's no header
* Control - if access to the disk1 is restricted, then even
if someone has access to disk2 they can't unlock
it. Might be useful if you have disks on NFS but
want to restrict which host can launch a VM
instance from it, by dynamically providing access
to the header to a designated host
* Flexibility - your application data volume may be a given
size and it is inconvenient to resize it to
add encryption.You can store the LUKS header
separately and use the existing storage
volume for payload
* Recovery - corruption of a bit in the header may make the
entire payload inaccessible. It might be
convenient to take backups of the header. If
your primary disk header becomes corrupt, you
can unlock the data still by pointing to the
backup detached header
Take the raw-format image as an example to introduce the usage
of the LUKS volume with a detached header:
1. prepare detached LUKS header images
$ dd if=/dev/zero of=test-header.img bs=1M count=32
$ dd if=/dev/zero of=test-payload.img bs=1M count=1000
$ cryptsetup luksFormat --header test-header.img test-payload.img
> --force-password --type luks1
2. block-add a protocol blockdev node of payload image
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-1-storage", "driver":"file",
> "filename":"test-payload.img"}}'
3. block-add a protocol blockdev node of LUKS header as above.
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-2-storage", "driver":"file",
> "filename": "test-header.img" }}'
4. object-add the secret for decrypting the cipher stored in
LUKS header above
$ virsh qemu-monitor-command vm '{"execute":"object-add",
> "arguments":{"qom-type":"secret", "id":
> "libvirt-2-storage-secret0", "data":"abc123"}}'
5. block-add the raw-drived blockdev format node
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-1-format", "driver":"raw",
> "file":"libvirt-1-storage"}}'
6. block-add the luks-drived blockdev to link the raw disk
with the LUKS header by specifying the field "header"
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-2-format", "driver":"luks",
> "file":"libvirt-1-format", "header":"libvirt-2-storage",
> "key-secret":"libvirt-2-format-secret0"}}'
7. hot-plug the virtio-blk device finally
$ virsh qemu-monitor-command vm '{"execute":"device_add",
> "arguments": {"num-queues":"1", "driver":"virtio-blk-pci",
> "drive": "libvirt-2-format", "id":"virtio-disk2"}}'
Starting a VM with a LUKS volume with detached header is
somewhat similar to hot-plug in that both maintaining the
same json command while the starting VM changes the
"blockdev-add/device_add" parameters to "blockdev/device".
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Documentation of type BlockdevOptionsIscsi describes the type's
purpose after its members. Everywhere else, we do it the other way
round. Move it for consistency.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240129115008.674248-5-armbru@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Documentation generated for SchemaInfo looks like
The members of "SchemaInfoBuiltin" when "meta-type" is ""builtin""
The members of "SchemaInfoEnum" when "meta-type" is ""enum""
The members of "SchemaInfoArray" when "meta-type" is ""array""
The members of "SchemaInfoObject" when "meta-type" is ""object""
The members of "SchemaInfoAlternate" when "meta-type" is ""alternate""
The members of "SchemaInfoCommand" when "meta-type" is ""command""
The members of "SchemaInfoEvent" when "meta-type" is ""event""
Additional members depend on the value of "meta-type".
The last line became redundant when commit 88f63467c5 (qapi2texi:
Generate reference to base type members) added the lines preceding it.
Drop it.
BlockdevOptions has the same issue. Drop
Remaining options are determined by the block driver.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240129115008.674248-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
- virtio-blk: Multiqueue fixes and cleanups
- blklogwrites: Fixes for write_zeroes and superblock update races
- commit/stream: Allow users to request only format driver names in
backing file format
- monitor: only run coroutine commands in qemu_aio_context
- Some iotest fixes
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmWzpOwRHGt3b2xmQHJl
ZGhhdC5jb20ACgkQfwmycsiPL9ZNzg//W1+C7HxLft4Jc4O1BcOoOLlGCg4Esupt
z0/XLZ9+xVQUtjQ82pFzf9XaWQs8CuNT3FBUKi+ngdwZ0JBThIv0aGiMZBcAeQjD
qshPFgDM1lGL4ICIaT73/qfUzQgO3oruZj9F+ShBBzoasNWVoRzqqVDR3pinLwTp
D4TU+3A6LkdhlYGT60SYfRq/UKNmCA1s2wysdjqXxS6KOEURNF2VBnz0Nu76qrVb
3P/a55GPiJIn+VVsdQ0J4vyyzn23m7I7WZOJ7Sjm1EfSJ6SvcDbhWsZTUonaV2rU
qZ3WI/jggqxXRV8F2AaA4suS/Cc8RkX2KfcN8fB6wDC2eI5USSatjh6xfw5xH9Ll
NRKUO4vFFR3Lf8wN9apg0Bwxqi0GOm9kvBJT5QqjQ16R1dvqBLqbZqcx6ZXqWFXe
/Iy243Tz19mWTFVUj0EgCKQpNz9F4SyXxV83HtSR1lJ5mhthnLxkvUOe7jsFPE4d
1Z3uBNWnx2mKFkhlwocMTKayYqxPuKQ+YjqrRoplLW1GZoBeoalKRGf8/RHa6kQx
gh4cguihlb71AH1AO1QuYpiZt9G4RJR2RZlIoCPJY5TaKJedcxMVn8H+8/F0PnQd
gPysZf7hTU1xCUV6TClDd+f2fuvqZYwXdwHJ9iiohNkbFq4HFQUp4nk4/eEPGSe/
uv8oE813E30=
=KQJl
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- virtio-blk: Multiqueue fixes and cleanups
- blklogwrites: Fixes for write_zeroes and superblock update races
- commit/stream: Allow users to request only format driver names in
backing file format
- monitor: only run coroutine commands in qemu_aio_context
- Some iotest fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmWzpOwRHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9ZNzg//W1+C7HxLft4Jc4O1BcOoOLlGCg4Esupt
# z0/XLZ9+xVQUtjQ82pFzf9XaWQs8CuNT3FBUKi+ngdwZ0JBThIv0aGiMZBcAeQjD
# qshPFgDM1lGL4ICIaT73/qfUzQgO3oruZj9F+ShBBzoasNWVoRzqqVDR3pinLwTp
# D4TU+3A6LkdhlYGT60SYfRq/UKNmCA1s2wysdjqXxS6KOEURNF2VBnz0Nu76qrVb
# 3P/a55GPiJIn+VVsdQ0J4vyyzn23m7I7WZOJ7Sjm1EfSJ6SvcDbhWsZTUonaV2rU
# qZ3WI/jggqxXRV8F2AaA4suS/Cc8RkX2KfcN8fB6wDC2eI5USSatjh6xfw5xH9Ll
# NRKUO4vFFR3Lf8wN9apg0Bwxqi0GOm9kvBJT5QqjQ16R1dvqBLqbZqcx6ZXqWFXe
# /Iy243Tz19mWTFVUj0EgCKQpNz9F4SyXxV83HtSR1lJ5mhthnLxkvUOe7jsFPE4d
# 1Z3uBNWnx2mKFkhlwocMTKayYqxPuKQ+YjqrRoplLW1GZoBeoalKRGf8/RHa6kQx
# gh4cguihlb71AH1AO1QuYpiZt9G4RJR2RZlIoCPJY5TaKJedcxMVn8H+8/F0PnQd
# gPysZf7hTU1xCUV6TClDd+f2fuvqZYwXdwHJ9iiohNkbFq4HFQUp4nk4/eEPGSe/
# uv8oE813E30=
# =KQJl
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 26 Jan 2024 12:26:20 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin:
iotests/277: Use iotests.sock_dir for socket creation
iotests/iothreads-stream: Use the right TimeoutError
tests/unit: Bump test-replication timeout to 60 seconds
iotests/264: Use iotests.sock_dir for socket creation
block/blklogwrites: Protect mutable driver state with a mutex.
virtio-blk: always set ioeventfd during startup
virtio-blk: tolerate failure to set BlockBackend AioContext
virtio-blk: restart s->rq reqs in vq AioContexts
virtio-blk: rename dataplane to ioeventfd
virtio-blk: rename dataplane create/destroy functions
virtio-blk: move dataplane code into virtio-blk.c
monitor: only run coroutine commands in qemu_aio_context
iotests: port 141 to Python for reliable QMP testing
iotests: add filter_qmp_generated_node_ids()
stream: Allow users to request only format driver names in backing file format
commit: Allow users to request only format driver names in backing file format
string-output-visitor: Fix (pseudo) struct handling
block/blklogwrites: Fix a bug when logging "write zeroes" operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a new flag 'backing-mask-protocol' for the block-stream QMP
command which instructs the internals to use 'raw' instead of the
protocol driver in case when a image is used without a dummy 'raw'
wrapper.
The flag is designed such that it can be always asserted by management
tools even when there isn't any update to backing files.
The flag will be used by libvirt so that the backing images still
reference the proper format even when libvirt will stop using the dummy
raw driver (raw driver with no other config). Libvirt needs this so that
the images stay compatible with older libvirt versions which didn't
expect that a protocol driver name can appear in the backing file format
field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <bbee9a0a59748a8893289bf8249f568f0d587e62.1701796348.git.pkrempa@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a new flag 'backing-mask-protocol' for the block-commit QMP
command which instructs the internals to use 'raw' instead of the
protocol driver in case when a image is used without a dummy 'raw'
wrapper.
The flag is designed such that it can be always asserted by management
tools even when there isn't any update to backing files.
The flag will be used by libvirt so that the backing images still
reference the proper format even when libvirt will stop using the dummy
raw driver (raw driver with no other config). Libvirt needs this so that
the images stay compatible with older libvirt versions which didn't
expect that a protocol driver name can appear in the backing file format
field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <2cb46e37093ce793ea1604abc8bbb90f4c8e434b.1701796348.git.pkrempa@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
"Since X.Y" is not recognized as a tagged section, and therefore not
formatted as such in generated documentation. Fix by adding the
required colon.
Previously fixed in commit 433a4fdc42 (qapi: Fix malformed "Since:"
section tags)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-8-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
When the discard-no-unref flag is enabled, we keep the reference for
normal discard requests.
But when a discard is executed on a snapshot/qcow2 image with backing,
the discards are saved as zero clusters in the snapshot image.
When committing the snapshot to the backing file, not
discard_in_l2_slice is called but zero_in_l2_slice. Which did not had
any logic to keep the reference when discard-no-unref is enabled.
Therefor we add logic in the zero_in_l2_slice call to keep the reference
on commit.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1621
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Message-Id: <20231003125236.216473-2-jean-louis@dupond.be>
[hreitz: Made the documentation change more verbose, as discussed
on-list]
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
To start out, only actively-synced is returned.
For example, this is useful for jobs that started out in background
mode and switched to active mode. Once actively-synced is true, it's
clear that the mode switch has been completed. Note that completion of
the switch might happen much earlier, e.g. if the switch happens
before the job is ready, once all background operations have finished.
It's assumed that whether the disks are actively-synced or not is more
interesting than whether the mode switch completed. That information
can still be added if required in the future.
In presence of an iothread, the actively_synced member is now shared
between the iothread and the main thread, so turn accesses to it
atomic.
Requires to adapt the output for iotest 109.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20231031135431.393137-10-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation to additionally return job-type-specific information.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20231031135431.393137-8-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation to turn BlockJobInfo into a union with @type as the
discriminator. That requires it to be an enum. Even without that
requirement, it's nicer to have an enum instead of a str here.
No functional change is intended.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031135431.393137-7-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
which allows switching the @copy-mode from 'background' to
'write-blocking'.
This is useful for management applications, so they can start out in
background mode to avoid limiting guest write speed and switch to
active mode when certain criteria are fulfilled.
In presence of an iothread, the copy_mode member is now shared between
the iothread and the main thread, so turn accesses to it atomic.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20231031135431.393137-6-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
which will allow changing job-type-specific options after job
creation.
In the JobVerbTable, the same allow bits as for set-speed are used,
because set-speed can be considered an existing change command.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20231031135431.393137-2-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Right now "qemu-img map" reports compressed blocks as containing data
but having no host offset. This is not very informative. Instead,
let's add another boolean field named "compressed" in case JSON output
mode is specified. This is achieved by utilizing new allocation status
flag BDRV_BLOCK_COMPRESSED for bdrv_block_status().
Also update the expected qemu-iotests outputs to contain the new field.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Message-ID: <20230907210226.953821-3-andrey.drobyshev@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit a937b6aa73 (qapi: Reformat doc comments to conform to
current conventions), a number of comments not conforming to the
current formatting conventions were added. No problem, just sweep
the entire documentation once more.
To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3". Finds no
differences. Comparing with diff is not useful, as the reflown
paragraphs are visible there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20230720071610.1096458-7-armbru@redhat.com>
Documentation for member @bin comes out like
list of io request counts corresponding to histogram intervals.
len("bins") = len("boundaries") + 1 For the example above, "bins"
may be something like [3, 1, 5, 2], and corresponding histogram
looks like:
Note how the equation and the sentence following it run together.
Replace the equation:
list of io request counts corresponding to histogram intervals,
one more element than "boundaries" has. For the example above,
"bins" may be something like [3, 1, 5, 2], and corresponding
histogram looks like:
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20230720071610.1096458-2-armbru@redhat.com>
[Off by one fixed]
When we for example have a sparse qcow2 image and discard: unmap is enabled,
there can be a lot of fragmentation in the image after some time. Especially on VM's
that do a lot of writes/deletes.
This causes the qcow2 image to grow even over 110% of its virtual size,
because the free gaps in the image get too small to allocate new
continuous clusters. So it allocates new space at the end of the image.
Disabling discard is not an option, as discard is needed to keep the
incremental backup size as low as possible. Without discard, the
incremental backups would become large, as qemu thinks it's just dirty
blocks but it doesn't know the blocks are unneeded.
So we need to avoid fragmentation but also 'empty' the unneeded blocks in
the image to have a small incremental backup.
In addition, we also want to send the discards further down the stack, so
the underlying blocks are still discarded.
Therefor we introduce a new qcow2 option "discard-no-unref".
When setting this option to true, discards will no longer have the qcow2
driver relinquish cluster allocations. Other than that, the request is
handled as normal: All clusters in range are marked as zero, and, if
pass-discard-request is true, it is passed further down the stack.
The only difference is that the now-zero clusters are preallocated
instead of being unallocated.
This will avoid fragmentation on the qcow2 image.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1621
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Message-Id: <20230605084523.34134-2-jean-louis@dupond.be>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
The virtio-blk-vhost-vdpa driver in libblkio 1.3.0 supports the fd
passing through the new 'fd' property.
Since now we are using qemu_open() on '@path' if the virtio-blk driver
supports the fd passing, let's announce it.
In this way, the management layer can pass the file descriptor of an
already opened vhost-vdpa character device. This is useful especially
when the device can only be accessed with certain privileges.
Add the '@fdset' feature only when the virtio-blk-vhost-vdpa driver
in libblkio supports it.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230530071941.8954-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Taking account of the new zone append write operation for zoned devices,
BLOCK_ACCT_ZONE_APPEND enum is introduced as other I/O request type (read,
write, flush).
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051916.178322-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Change
# @name: Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed
# do eiusmod tempor incididunt ut labore et dolore magna aliqua.
to
# @name: Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed
# do eiusmod tempor incididunt ut labore et dolore magna aliqua.
See recent commit "qapi: Relax doc string @name: description
indentation rules" for rationale.
Reflow paragraphs to 70 columns width, and consistently use two spaces
to separate sentences.
To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3". Finds no
differences. Comparing with diff is not useful, as the reflown
paragraphs are visible there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-18-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Lukas Straub <lukasstraub2@web.de>
[Straightforward conflicts in qapi/audio.json qapi/misc-target.json
qapi/run-state.json resolved]
Member / argument documentation of BlockdevAmendOptionsQcow2,
job-resume, and RDMA_GID_STATUS_CHANGED is parsed as ordinary text due
to missing colon or space before the colon. The generated
documentation shows these members / arguments as "Not documented".
The fix is obvious: add missing colons, delete extra spaces.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230425064223.820979-13-armbru@redhat.com>
rST parses something like
first line
second line
as a definition list item, where "first line" is the term being
defined by "second line".
This bites us in a couple of places. Here's one:
# @bps_max: total throughput limit during bursts,
# in bytes (Since 1.7)
scripts/qapi/parser.py parses this into an "argument section" with
name "bps_max" and text
total throughput limit during bursts,
in bytes (Since 1.7)
docs/sphinx/qapidoc.py duly passes the text to the rST parser, which
parses it as another definition list. Comes out as nested
definitions: term "bps_max: int (optional)" defined as term "total
throughput limit during bursts," defined as "in bytes (Since 1.7)".
rST truly is the Perl of ASCII-based markups.
Fix by deleting the extra indentation.
Fixes: 26ec4e53f2 (qapi: Fix indent level on doc comments in json files)
Fixes: c0ac533b6f (qapi: Stop using whitespace for alignment in comments)
Fixes: 81ad2964e9 (net/vmnet: add vmnet backends to qapi/net)
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230425064223.820979-11-armbru@redhat.com>
A few examples neglect to prefix QMP input with '->'. Fix that.
Two examples have extra space after '<-'. Delete it.
A few examples neglect to show output. Provide some. The example
output for query-vcpu-dirty-limit could use further improvement. Add
a TODO comment.
Use "Examples:" instead of "Example:" where multiple examples are
given.
One example section numbers its two examples. Not done elsewhere;
drop.
Another example section separates them with "or". Likewise.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230425064223.820979-8-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Commit 81cbfd5088 (block: remove dirty bitmaps 'status' field)
removed deprecated BlockDirtyInfo member @status. It neglected to
remove references to its enumeration values from the documentation of
its replacements. Do that now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20230425064223.820979-6-armbru@redhat.com>
Commit de253f1491 (qmp: switch to the new error format on the
wire) removed most error classes. Several later commits mistakenly
mentioned them in documentation. Replace them by the actual error
class there.
Fixes: 44e3e053af (qmp: add interface blockdev-snapshot-delete-internal-sync)
Fixes: f323bc9e8b (qmp: add interface blockdev-snapshot-internal-sync)
Fixes: ba1c048a8f (qapi: Introduce add-fd, remove-fd, query-fdsets)
Fixes: ed61fc10e8 (QAPI: add command for live block commit, 'block-commit')
Fixes: e4c8f004c5 (qapi: convert sendkey)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230425064223.820979-5-armbru@redhat.com>
Starting from ceph Reef, RBD has built-in support for layered encryption,
where each ancestor image (in a cloned image setting) can be possibly
encrypted using a unique passphrase.
A new function, rbd_encryption_load2, was added to librbd API.
This new function supports an array of passphrases (via "spec" structs).
This commit extends the qemu rbd driver API to use this new librbd API,
in order to support this new layered encryption feature.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Message-Id: <20230129113120.722708-4-oro@oro.sl.cloud9.ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Ceph RBD encryption API required specifying the encryption format
for loading encryption. The supported formats were LUKS (v1) and LUKS2.
Starting from Reef release, RBD also supports loading with "luks-any" format,
which works for both versions of LUKS.
This commit extends the qemu rbd driver API to enable qemu users to use
this luks-any wildcard format.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Message-Id: <20230129113120.722708-3-oro@oro.sl.cloud9.ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For every node in the backing chain, collect its BlockGraphInfo struct
using bdrv_query_block_graph_info(). Print all nodes' information,
indenting child nodes and labelling them with a path constructed from
the child names leading to the node from the root (e.g. /file/file).
Note that we open each image with BDRV_O_NO_BACKING, so its backing
child is omitted from this graph, and thus presented in the previous
manner: By simply concatenating all images' information, separated with
blank lines.
This affects two iotests:
- 065: Here we try to get the format node's format specific information.
The pre-patch code does so by taking all lines from "Format specific
information:" until an empty line. This format specific information
is no longer followed by an empty line, though, but by child node
information, so limit the range by "Child node '/file':".
- 302: Calls qemu_img() for qemu-img info directly, which does not
filter the output, so the child node information ends up in the
output.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-12-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a new QAPI type BlockGraphInfo and an associated
bdrv_query_block_graph_info() function that recursively gathers
BlockNodeInfo objects through a block graph.
A follow-up patch is going to make "qemu-img info" use this to print
information about all nodes that are (usually implicitly) opened for a
given image file.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-8-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img info never uses ImageInfo's backing-image field, because it
opens the backing chain one by one with BDRV_O_NO_BACKING, and prints
all backing chain nodes' information consecutively. Use BlockNodeInfo
to make it clear that we only print information about a single node, and
that we are not using the backing-image field.
Notably, bdrv_image_info_dump() does not evaluate the backing-image
field, so we can easily make it take a BlockNodeInfo pointer (and
consequentially rename it to bdrv_node_info_dump()). It makes more
sense this way, because again, the interface now makes it syntactically
clear that backing-image is ignored by this function.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-6-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ImageInfo sometimes contains flat information, and sometimes it does
not. Split off a BlockNodeInfo struct, which only contains information
about a single node and has no link to the backing image.
We do this so we can extend BlockNodeInfo to a BlockGraphInfo struct,
which has links to all child nodes, not just the backing node. It would
be strange to base BlockGraphInfo on ImageInfo, because then this
extended struct would have two links to the backing node (one in
BlockGraphInfo as one of all the child links, and one in ImageInfo).
Furthermore, it is quite common to ignore the backing-image field
altogether: bdrv_query_image_info() does not set it, and
bdrv_image_info_dump() does not evaluate it. That signals that we
should have different structs for describing a single node and one that
has a link to the backing image.
Still, bdrv_query_image_info() and bdrv_image_info_dump() are not
changed too much in this patch. Follow-up patches will handle them.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-5-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VMDK's implementation of .bdrv_get_specific_info() returns information
about its extent files, ostensibly in the form of ImageInfo objects.
However, it does not get this information through
bdrv_query_image_info(), but fills only a select few fields with custom
information that does not always match the fields' purposes.
For example, @format, which is supposed to be a block driver name, is
filled with the extent type, e.g. SPARSE or FLAT.
In ImageInfo, @compressed shows whether the data that can be seen in the
image is stored in compressed form or not. For example, a compressed
qcow2 image will store compressed data in its data file, but when
accessing the qcow2 node, you will see normal data. This is not how
VMDK uses the @compressed field for its extent files: Instead, it
signifies whether accessing the extent file will yield compressed data
(which the VMDK driver then (de-)compresses).
Create a new structure to represent the extent information. This allows
us to clarify the fields' meanings, and it clearly shows that these are
not complete ImageInfo objects. (That is, if a user wants an extent
file's ImageInfo object, they will need to query it separately, and will
not get it from ImageInfoSpecificVmdk.extents.)
Note that this removes the last use of ['ImageInfo'] (i.e. an array of
ImageInfo objects), so the QAPI generator will no longer generate
ImageInfoList by default. However, we use it in qemu-img.c, so we need
to create a dummy object to force the generate to create that type,
similarly to DummyForceArrays in machine.json (introduced in commit
9f08c8ec73 ("qapi: Lazy creation of array
types")).
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-4-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add some (optional) information that the file driver can provide for
image files, namely the extent size hint.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220620162704.80987-3-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The nvme-io_uring BlockDriver's path option must point at the character
device of an NVMe namespace, not at an image file.
Fixes: fd66dbd424 ("blkio: add libblkio block driver")
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-Id: <20221108142347.1322674-1-afaria@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The nvme-io_uring driver expects a character special file such as
/dev/ng0n1. Follow the convention of having a "filename" option when a
regular file is expected, and a "path" option otherwise.
This makes io_uring the only libblkio-based driver with a "filename"
option, as it accepts a regular file (even though it can also take a
block special file).
Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-id: 20221028233854.839933-1-afaria@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
