This callback is called by main loop before polling s->fd, if it returns
false, the fd will not be polled in this iteration.
This is redundant with checks inside read callback. After this patch,
the data will be copied from s->fd to s->msgvec when it arrives. If the
device can't receive, it will be queued to incoming_queue, and when the
device status changes, this queue will be flushed.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When -netdev vhost-user fails, it first reports a specific error, then
one or more generic ones, like this:
$ qemu-system-x86_64 -netdev vhost-user,id=foo,chardev=xxx
qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: chardev "xxx" not found
qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: No suitable chardev found
qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: Device 'vhost-user' could not be initialized
With the command line, the messages go to stderr. In HMP, they go to
the monitor. In QMP, the last one becomes the error reply, and the
others go to stderr.
Convert net_init_vhost_user() and its helpers to Error. This
suppresses the unwanted unspecific error messages, and makes the
specific error the QMP error reply.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Retain the function value for now, to permit selective conversion of
its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When the argument is non-zero, qemu_opt_foreach() stops on callback
returning non-zero, and returns that value.
When the argument is zero, it doesn't stop, and returns the callback's
value from the last iteration.
The two callers that pass zero could just as well pass one:
* qemu_spice_init()'s callback add_channel() either returns zero or
exit()s.
* config_write_opts()'s callback config_write_opt() always returns
zero.
Drop the parameter, and always stop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Retain the function value for now, to permit selective conversion of
its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
When the argument is non-zero, qemu_opts_foreach() stops on callback
returning non-zero, and returns that value.
When the argument is zero, it doesn't stop, and returns the bit-wise
inclusive or of all the return values. Funky :)
The callers that pass zero could just as well pass one, because their
callbacks can't return anything but zero:
* qemu_add_globals()'s callback qdev_add_one_global()
* qemu_config_write()'s callback config_write_opts()
* main()'s callbacks default_driver_check(), drive_enable_snapshot(),
vnc_init_func()
Drop the parameter, and always stop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
In this version I used mkdtemp(3) which is:
_BSD_SOURCE
|| /* Since glibc 2.10: */
(_POSIX_C_SOURCE >= 200809L || _XOPEN_SOURCE >= 700)
(POSIX.1-2008), so should be available on systems we care about.
While at it, reset the resulting directory name within smb structure
on error so cleanup function wont try to remove directory which we
failed to create.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Based on patch by Nikolay Nikolaev:
Vhost-user will implement the multi queue support in a similar way
to what vhost already has - a separate thread for each queue.
To enable the multi queue functionality - a new command line parameter
"queues" is introduced for the vhost-user netdev.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently QEMU dynamically generates mac address for the NIC which
doesn't specify the mac address. But when we hotplug a NIC without
specifying mac address, the mac address will increase for the same NIC
along with hotplug and hot-unplug, and at last it will overflow. And if
we codeplug one NIC with mac address e.g. "52:54:00:12:34:56", then
hotplug one NIC without specifying mac address and the mac address of
the hotplugged NIC is duplicate of "52:54:00:12:34:56".
This patch add a mac_table to record the usage status and free the mac
address when the NIC is unrealized.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When -netdev tap fails, it first reports a specific error, then a
generic one, like this:
$ qemu-system-x86_64 -netdev tap,id=foo
qemu-system-x86_64: -netdev tap,id=foo: could not configure /dev/net/tun: Operation not permitted
qemu-system-x86_64: -netdev tap,id=foo: Device 'tap' could not be initialized
With the command line, the messages go to stderr. In HMP, they go to
the monitor. In QMP, the second one becomes the error reply, and the
first one goes to stderr.
Convert net_init_tap() to Error. This suppresses the unwanted second
message, and makes the specific error the QMP error reply.
[Dropped duplicate "and" from error message as suggested by Eric Blake:
"ifname=, script=, downscript=, and vnet_hdr=, "
"queues=, and vhostfds= are invalid with helper="
--Stefan]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-16-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-15-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fixes inappropriate use of syslog().
Not fixed: leaks on error paths, suspicious non-fatal errors. FIXMEs
added instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-14-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fixes inappropriate use of stderr in monitor command handler.
While there, improve some of the messages a bit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-13-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-12-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert the trivial ones immediately: tap-aix and tap-haiku.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-11-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fixes inappropriate use of stderr in monitor command handler.
While there, improve the messages some.
[Fixed Error **err -> Error *err local variable that broke the build.
--Stefan]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-10-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Dropped %s from "tap: open vhost char device failed: %s" since
error_setg_errno() already prints a human-readable error string and
there is no format string argument.
--Stefan]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-9-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-8-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When -netdev bridge fails, it first reports a specific error, then a
generic one, like this:
$ qemu-system-x86_64 -netdev bridge,id=foo
failed to launch bridge helper
qemu-system-x86_64: -netdev bridge,id=foo: Device 'bridge' could not be initialized
The first message goes to stderr. Wrong for HMP, because errors need
to go to the monitor there.
The second message goes to stderr for -netdev, to the monitor for HMP
netdev_add, and becomes the error reply for QMP netdev_add.
Convert net_bridge_run_helper() to Error, and propagate its errors
through net_init_bridge(). This ensures the error gets reported where
the user is, and suppresses the unwanted second message.
While there, improve the error messages a bit.
The above example becomes:
$ qemu-system-x86_64 -netdev bridge,id=foo
qemu-system-x86_64: -netdev bridge,id=foo: bridge helper failed
net_init_tap() also uses net_bridge_run_helper(). Propagate its
errors there as well. Improves reporting these errors with -netdev
tap & friends.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-7-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-6-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When -net dump fails, it first reports a specific error, then a
generic one, like this:
$ qemu-system-x86_64 -net dump,id=foo,file=/eperm
qemu-system-x86_64: -net dump,id=foo,file=/eperm: -net dump: can't open /eperm
qemu-system-x86_64: -net dump,id=foo,file=/eperm: Device 'dump' could not be initialized
Convert net_init_tap() to Error. This suppresses the unwanted second
message.
Improve the error messages to include strerror(errno) where
appropriate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-5-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When -net nic fails, it first reports a specific error, then a generic
one, like this:
$ qemu-system-x86_64 -net nic,netdev=nonexistent
qemu-system-x86_64: -net nic,netdev=nonexistent: netdev 'nonexistent' not found
qemu-system-x86_64: -net nic,netdev=nonexistent: Device 'nic' could not be initialized
Convert net_init_nic() to Error to get rid of the unwanted second
error message.
While there, tidy up an Overcapitalized Error Message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-4-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Error reporting for netdev_add is broken: the net_client_init_fun[]
report the actual errors with (at best) error_report(), and their
caller net_client_init1() makes up a generic error on top.
For command line and HMP, this produces an mildly ugly error cascade.
In QMP, the actual errors go to stderr, and the generic error becomes
the command's error reply.
To fix this, we need to convert the net_client_init_fun[] to Error.
To permit fixing them one by one, add an Error ** parameter to the
net_client_init_fun[]. If the call fails without returning an Error,
make up the same generic Error as before. But if it returns one, use
that instead. Since none of them does so far, no functional change.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-3-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Type "hubport" is valid only with -netdev. Unfortunately, that's
detected late and the error message doesn't explain why:
$ qemu-system-i386 -net hubport,id=foo,hubid=0
qemu-system-i386: -net hubport,id=foo,hubid=0: Device 'hubport' could not be initialized
Improve the error message to "Parameter 'type' expects a net type".
Not fixed: -net hubport without the parameters required by -netdev
hubport still asks for those parameters:
$ qemu-system-i386 -net hubport
qemu-system-i386: -net hubport: Parameter 'hubid' is missing
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-2-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We can use this in virtio-net code as well as new Rocker driver code, so
up-level this.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1426306173-24884-2-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using net_host_check_device is unnecessary. qemu_del_net_client asserts
for the non-peer case that it can only process NIC type NetClientStates,
and that assertion is valid for the peered case as well, so move it and
use the same check in net_host_device_remove. host_net_remove_completion
is already checking the type.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Message-id: 1419353600-30519-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
=LY/j
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* remotes/mst/tags/for_upstream: (130 commits)
acpi: drop unused code
aml-build: comment fix
acpi-build: fix typo in comment
acpi: update generated files
vhost user:support vhost user nic for non msi guests
aml-build: fix build for glib < 2.22
acpi: update generated files
Makefile.target: binary depends on config-devices
acpi-test-data: update after pci rewrite
acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
pci-hotplug-old: Has been dead for five major releases, bury
pci: Give a few helpers internal linkage
acpi: make build_*() routines static to aml-build.c
pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
pc: acpi-build: drop template patching and create PCI bus tree dynamically
tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
pc: acpi-build: simplify PCI bus tree generation
tests: add ACPI blobs for qemu with bridge cases
tests: bios-tables-test: add support for testing bridges
tests: ACPI test blobs update due to PCI0._CRS changes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
hw/pci/pci-hotplug-old.c
Currently, vhost user nic doesn't support non msi guests(like pxe stage) by default.
Vhost user nic can't fall back to qemu like normal vhost net nic does. So we should
enable it for non msi guests.
Signed-off-by: Haifeng Gao <gaohaifeng.gao@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().
Most of its users assume the function can't fail. Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.
Just two users remain, in util/qemu-config.c. Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.
Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.
Exceptions:
* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
sun4m_hmp_info_pic().
* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
lm32_hmp_info_pic().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(),
and sometimes COMMAND pointlessly differs in spelling.
Normalize to hmp_COMMAND(), where COMMAND is exactly the command name
with '-' replaced by '_'.
Exceptions:
* do_device_add() and client_migrate_info() *not* renamed to
hmp_device_add(), hmp_client_migrate_info(), because they're also
QMP handlers. They still need to be converted to QAPI.
* do_memory_dump(), do_physical_memory_dump(), do_ioport_read(),
do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(),
hmp_i(), hmp_o(), because those names are too cryptic for my taste.
* do_info_help() renamed to hmp_info_help() instead of hmp_info(),
because it only covers help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err() in HMP command handler
hmp_host_net_add() and initial startup helpers net_init_client(),
net_init_netdev(). Keep it in QMP command handler qmp_netdev_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
monitor_handle_fd_param() is a wrapper around
monitor_handle_fd_param2() that feeds errors to qerror_report_err()
instead of returning them. qerror_report_err() is inappropriate in
many contexts. monitor_handle_fd_param() looks simpler than
monitor_handle_fd_param2(), which tempts use. Remove the temptation:
drop the wrapper and open-code the (trivial) error handling instead.
Replace the open-coded qerror_report_err() by error_report_err() in
places that already use error_report(). Turns out that's everywhere.
While there, rename monitor_handle_fd_param2() to monitor_fd_param().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We should del hub port when peer is deleted since it will not be reused
and will only be freed during exit.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1422860798-17495-3-git-send-email-jasowang@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If is_connected parameter is false, the saddr
variable will no initialize. Coverity report:
uninit_use: Using uninitialized value saddr.sin_port.
We don't need add saddr information to nc->info_str
when is_connected is false.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
commit b412eb61 introduce 'cmd:' target for guestfwd,
and fwd don't be used in this scenario, and will leak
memory in true branch with 'cmd:'. Let's allocate memory
for fwd variable just in else statement.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In this false branch, fd will leak when it is zero.
Change the testing condition.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
[Fix net_l2tpv3_cleanup as well. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
freeaddrinfo(result) does not assign result = NULL, after frees it.
There will be a double free when it goes error case.
It is reported by covertiy.
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The file sharing module should not handle printers, so disable it.
The options 'load printers' and 'printing' have been available since the
beginning (May 1996, commit 0e8fd3398771da2f016d72830179507f3edda51b).
Option 'disable spoolss' is available since Samba 2.0.4, commit
de5f42c9d9172592779fa2504d44544e3b6b1c0d).
Next, "socket address" was reported as deprecated, use a combination of
"interfaces" and "bind interfaces only" instead (available since October
1997, commit 79f4fb52c1ed56fd843f81b4eb0cdd2991d4d0f4).
Override cache directory to avoid writing to a global directory. Option
available since Samba 3.4.0, Jan 2009, commit
19a05bf2f485023b11b41dfae3f6459847d55ef7.
Set "usershare max shared=0" to prevent a global directory from being
used. Option available since Samba 3.0.23, February 2006, commit
5831715049f2d460ce42299963a5defdc160891b.
The last option was introduced with Samba 3.4.0, but previously
"state directory" was already added which exists in Samba 3.4.0. As
unknown parameters are ignored (while printing a warning), it should be
safe to add another option.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In hotplugging scenario, taking those true branch, the file
handler do not be closed. Let's close them before return.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
commit 5193e5fb (tap: factor out common tap initialization)
introduce net_init_tap_one(). But it's inappropriate that
we close fd in net_init_tap_one(), we should lay it in the
caller, becuase some callers needn't to close it if we get
the fd by monitor_handle_fd_param().
On the other hand, in other exceptional branches fd isn't
closed, so that's incomplete anyway.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
DEFAULT_NETWORK_SCRIPT and DEFAULT_NETWORK_DOWN_SCRIPT
have been defined in net/net.h included in
tap.c, which is the only C file that using those two macro.
Let's remove the repeating macroinstruction.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It looks like smbd always logs to /var/log/samba/log.$progname
even if config file specifies different logfile -- when it needs
to log something before completing reading the config file. But
if it can't open it for writing, it fails and exits. Tell smbd
to use our temp dir as logbase (-l option) to avoid that.
The same option is used by samba3 and samba4, so there should
be no incompatible changes.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUCJQsAAoJEJykq7OBq3PIFs4H/jHdJ65oXUeS8REtDwsRaU/q
Ftny6suH0j8XYh/zFSppNFHprX/i2AB7oJpHS8MzVjglxQ06OT/BQWSb2NA99URD
PARU0/Ijn2ZgReCiMS3qBGotYLJV/pJsZRtmi6xc/v9Zz/LlziBo1J/ZsZeMkhiP
RL/Q5ySixyWGx32989YcTmn98aCc4nvG70pE3dz3I3PPYQtUn38uqTltYPORaOgy
txhIOxeyvwgL+jwYvoJq5UgDpOw/QNtLRzN0+YydRUs5ad7roSlRX4PvlBgXxfWc
NPxt/wM+OPEyN029KLV8IjVNvxxM/QRNFqksabnmJIS/SgBaiSRPHZuHR5po8C4=
=cCXt
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging
Net patches
# gpg: Signature made Thu 04 Sep 2014 17:32:44 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/net-pull-request:
virtio-net: purge outstanding packets when starting vhost
net: complete all queued packets on VM stop
net: invoke callback when purging queue
virtio: don't call device on !vm_running
virtio-net: don't run bh on vm stopped
net: Forbid dealing with packets when VM is not running
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This completes all packets, ensuring that callbacks
will not run when VM is stopped.
Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
devices rely on packet callbacks eventually running,
but we violate this rule whenever we purge the queue.
To fix, invoke callbacks on all packets on purge.
Set length to 0, this way callers can detect that
this happened and re-queue if necessary.
Cc: qemu-stable@nongnu.org
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For all NICs(except virtio-net) emulated by qemu,
Such as e1000, rtl8139, pcnet and ne2k_pci,
Qemu can still receive packets when VM is not running.
If this happened in *migration's* last PAUSE VM stage, but
before the end of the migration, the new receiving packets will possibly dirty
parts of RAM which has been cached in *iovec*(will be sent asynchronously) and
dirty parts of new RAM which will be missed.
This will lead serious network fault in VM.
To avoid this, we forbid receiving packets in generic net code when
VM is not running.
Bug reproduction steps:
(1) Start a VM which configured at least one NIC
(2) In VM, open several Terminal and do *Ping IP -i 0.1*
(3) Migrate the VM repeatedly between two Hosts
And the *PING* command in VM will very likely fail with message:
'Destination HOST Unreachable', the NIC in VM will stay unavailable unless you
run 'service network restart'
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The hostfwd_add and hostfwd_remove monitor commands allow the user
to optionally specify a vlan/stack tuple. hostfwd_add honours this,
but hostfwd_remove does not (it looks up the tuple but then ignores
the SlirpState it has looked up and always uses the first stack
in the list anyway). Correct this to honour what the user requested.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The current behaviour of tap_open for BSD systems differ greatly from
it's Linux counterpart. Since FreeBSD supports interface renaming and
tap device cloning by opening /dev/tap, implement a FreeBSD specific
version of tap_open that behaves like it's Linux counterpart.
This is specially important for toolstacks that use Qemu (like Xen
libxl), in order to have a unified behaviour across suported
platforms.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
If the user specified a (vlan ID, slirp stack name) tuple in a monitor
hostfwd_add/remove command and we can't find it, give the user an
error message rather than silently doing nothing.
This brings this error case in slirp_lookup() into line with the
other two.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The mmsghdr struct is only introduced in Linux 2.6.32; add a
configure check for it and disable L2TPV3 on hosts which are
too old to provide it, rather than simply failing to compile.
Reported-by: chenliang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1404219488-11196-1-git-send-email-arei.gonglei@huawei.com
[PMM: cleaned up commit message and corrected kernel version number]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It indicates the number of elements in ncs field and makes sense to have
int inside NICPeers. Also in parse_netdev we do not need to access
container and work with NICPeers only.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This transport allows to connect a QEMU nic to a static Ethernet
over L2TPv3 tunnel. The transport supports all options present
in the Linux kernel implementation. It allows QEMU to connect
to any Linux host running kernel 3.3+, most routers and network
devices as well as other QEMU instances.
[Fixed up net_client_init1() switch statement to support -netdev
--Stefan]
Signed-off-by: Anton Ivanov <antivano@cisco.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The supplied chardev id will be inspected for supported options. Only
a socket backend, with a set path (i.e. a Unix socket) and optionally
the server parameter set, will be allowed. Other options (nowait, telnet)
will make the chardev unusable and the netdev will not be initialised.
Additional checks for validity:
- requires `-numa node,memdev=..`
- requires `-device virtio-net-*`
The `vhostforce` option is used to force vhost-net when we deal with
non-MSIX guests.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a new QEMU netdev backend that is intended to invoke vhost_net with the
vhost-user backend. It uses an Unix socket chardev to establish a
communication with the 'slave' (client and server mode supported).
At runtime the netdev will handle OPEN/CLOSE events from the chardev. Upon
disconnection it will set link_down accordingly and notify virtio-net; the
virtio-net interface will go down.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use vhost_set_backend_type to initialise a proper vhost_ops structure.
In vhost_net_init and vhost_net_start_one call conditionally TAP related
initialisation depending on the vhost backend type.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_dev_init will replace devfd and devpath with a single opaque argument.
This is initialised with a file descriptor. When TAP is used (through
vhost_net), open /dev/vhost-net and pass the fd as an opaque parameter in
VhostNetOptions. The same applies to vhost-scsi - open /dev/vhost-scsi and
pass the fd.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make it possible to query all net clients without specifying an ID when calling
qemu_find_net_clients_except().
This also adds the add_completion_option() function which is to be used for
other commands completions as well.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The smbd forked by qemu still uses the default ncalrpc directory
in /var/run/samba. This may lead to problems, if /var/run/samba
does not exist (for example if /var/run is a tmpfs and the host
smbd was not started).
This leads to the following error message from samba
and an unworkable smbd:
Failed to create pipe directory /var/run/samba/ncalrpc - No such file or directory
Fix this by pointing smbd to /tmp/qemu-smb.%d.%d/ncalrpc as ncalrpc directory.
Smbd will create the actual ncalrpc subdirectory on its own.
Signed-off-by: Michael Buesch <m@bues.ch>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Applying this to -trivial because it _is_ rather trivial
and because Jan does not reply for months)
Using error_is_set(errp) that way can sweep programming errors under
the carpet when we get called incorrectly with an error set.
qmp_query_rx_filter() breaks its loop when it detects an error. It
needs to set another error when the loop completes normally.
Return right away instead of merely breaking the loop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With a client name, the QMP command is specified to return a list of
one element. This isn't locally obvious in the code. Make it so.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Avoid iterations for fd 0, 1 & 2 when we are closing file fds in child process.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Also convert nearby monitor_printf() call to error_report().
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTIGWkAAoJEJykq7OBq3PIsvYH/jLFORFyUHflSsEmPjjRKGfR
Jd41UP67CXqgOyeJfDDN/fks2o6n3woRsoz/EfPXTiOvXB50jBKqmBarOwh/Zejq
/5hpUC8IyYOFpeKbiCSneXvANP+0CfH/FD8yP64a3FTBXQFQD9GzJpKf3zlcmNvI
XotlIr/WxTXXNSQf2dTleobGJWg8otDFREBCvalTndSBjYZ0GdvvNOCiAkqYviX2
wLjrrRvJYW/lxOTIfTmGQFHs89tjq9ZvotKr9QPOQ5MOGaBExYnOTaSHmmPHjYpf
HsWkk+u85vLSRp5FU5CTW2VfhIujBghwaFFnVh2BdMjIlzkjbDnDMcRr2YgebOw=
=zhuM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging
Net patches
# gpg: Signature made Wed 12 Mar 2014 13:48:20 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/net-pull-request:
tap: avoid deadlocking rx
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The net subsystem has a control flow mechanism so peer NetClientStates
can tell each other to stop sending packets. This is used to stop
monitoring the tap file descriptor for incoming packets if the guest rx
ring has no spare buffers.
There is a corner case when tap_can_send() is true at the beginning of
an event loop iteration but becomes false before the tap_send() fd
handler is invoked.
tap_send() will read the packet from the tap file descriptor and attempt
to send it. The net queue will hold on to the packet and return 0,
indicating that further I/O is not possible. tap then stops monitoring
the file descriptor for reads.
This is unlike the normal case where tap_can_send() is the same before
and during the event loop iteration. The event loop would simply not
monitor the file descriptor if tap_can_send() returns true. Upon next
iteration it would check tap_can_send() again and begin monitoring if we
can send.
The deadlock happens because tap_send() explicitly disabled read_poll.
This is done with the expectation that the peer will call
qemu_net_queue_flush(). But hw/net/virtio-net.c does not monitor
vm_running transitions and issue the flush. Hence we're left with a
broken tap device.
Cc: qemu-stable@nongnu.org
Reported-by: Neil Skrypuch <neil@tembosocial.com>
Tested-by: Neil Skrypuch <neil@tembosocial.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After numerous reports that -smb (or -netdev user,smb=foo) not working
with modern windows (win7 and vista are reported as non-working), I
started digging myself. And found that indeed it doesn't work, and
why.
The thing is that modern win tries to connect to port 445 (microsoft-ds)
first, and if that fails, it falls back to old port 139 (netbios-ssn).
slirp code in qemu only redirects port 139, it does not touch port 445.
So the prob is that if samba is also running on the host, guest will try
to communicate using port 445, and that will succed, but ofcourse guest
will not talk with our samba but with samba running on the host.
If samba is not running on the host, guest will fall back to port 139,
and will reach the redirecting rule and qemu will spawn smbd correctly.
The solution is to redirect both ports (139 and 445), and the fix is
a one-liner, adding second call to slirp_add_exec() at the end of
net/slirp.c:slirp_smb() function (provided below).
But it looks like that is not a proper fix really, since in theory
we should redirect both ports to the SAME, single samba instance,
but I'm not sure this is possible with slirp. Well, even if two
smbd processes will be run on the same config dir, it should not
be a problem.
The one-liner (not exactly 1 since it touches previous line too) is like
this:
Signed-off-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The smb.conf automatically generated by qemu's -smb option fails on current
samba, because smbd rejects the security=share option with the following warning:
> WARNING: Ignoring invalid value 'share' for parameter 'security'
Which makes it fall back to security=user without guest login.
This results in being unable to login to the samba server from the guest OS.
This fixes it by selecting 'user' explicitly and mapping
unknown users to guest logins.
Signed-off-by: Michael Buesch <m@bues.ch>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The virtio_net offload APIs are used on the NIC's peer (i.e. the tap
device). The API was defined to implicitly use nc->peer, saving the
caller the trouble.
This wasn't ideal because:
1. There are callers who have the peer but not the NIC. Currently they
are forced to bypass the API and access peer->info->... directly.
2. The rest of the net.h API uses nc, not nc->peer, so it is
inconsistent.
This patch pushes nc->peer back up to callers.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch fixes configure so that the netmap backend is not compiled in if the
host doesn't support an API version >= 11. A version upper bound (15) has been
added so that the netmap API can be extended with some minor features without
requiring QEMU code modifications.
Moreover, some changes have been done to net/netmap.c in order to reflect the
current netmap API/ABI (11).
The NETMAP_WITH_LIBS macro makes possible to include some utilities (e.g.
netmap ring macros, D(), RD() and other high level functions) through the netmap
headers. In this way we get rid of the D and RD macro definitions in the QEMU
code, and we open the way for further code simplifications that will be
introduced by future patches.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Whit this patch, the netmap backend supports TSO/UFO/CSUM
offloadings, and accepts the virtio-net header, similarly to what
happens with TAP. The offloading callbacks in the NetClientInfo
interface have been implemented.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since TAP offloadings are manipulated through a new API, it's
not necessary to export them in include/net/tap.h anymore.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The TAP NetClientInfo structure is inizialized with the TAP-specific
functions that manipulates offloading features.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some new callbacks have been added to generalize the operations done
by virtio-net and vmxnet3 frontends to manipulate TAP offloadings.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The tap_has_vnet_hdr() and tap_has_vnet_hdr_len() functions used
to return int, even though they only return true/false values.
This patch changes the prototypes to return bool.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
assign_name() in net/net.c is using snprintf + g_strdup to get the same
result as g_strdup_printf.
Signed-off-by: Hani Benhabiles <kroosec@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This improves readability and simplifies the code.
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When a link change occurs on a backend (like tap), we currently do
not propage such change to the nic. As a result, when someone turns
off a link on a tap device, for instance, then a guest doesn't see
that change and continues to try to send traffic or run DHCP even
though the lower-layer is disconnected. This is OK when the network
is set up as a HUB since the the guest may be connected to other HUB
ports too, but when it's set up as a netdev, it makes thinkgs worse.
The patch addresses this by setting the peers link down only when the
peer is not a HUBPORT device. With this patch, in the following config
-netdev tap,id=net0 -device e1000,mac=XXXXX,netdev=net0
when net0 link is turned off, the guest e1000 shows lower-layer link
down. This allows guests to boot much faster in such configurations.
With windows guest, it also allows the network to recover properly
since windows will not configure the link-local IPv4 address, and
when the link is turned on, the proper address address is configured.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds support for a network backend based on netmap.
netmap is a framework for high speed packet I/O. You can use it
to build extremely fast traffic generators, monitors, software
switches or network middleboxes. Its companion software switch
VALE lets you interconnect virtual machines.
netmap and VALE are implemented as a non-intrusive kernel module,
support NICs from multiple vendors, are part of standard FreeBSD
distributions and available in source format for Linux too.
To compile QEMU with netmap support, use the following configure
options:
./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys
where "/path/to/netmap" contains the netmap source code, available at
http://info.iet.unipi.it/~luigi/netmap/
The same webpage contains more information about the netmap project
(together with papers and presentations).
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Do not return after net_hub_flush(). Always flush callee network client
incoming queue.
Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[Assigning a multicast MAC address to a NIC leads to confusing behavior.
Reject multicast MAC addresses so users are alerted to their error
straight away.
The "net/eth.h" in6_addr rename prevents a name collision with
<netinet/in.h> on Linux.
-- Stefan]
Signed-off-by: Dmitry V. Krivenok <krivenok.dmitry@gmail.com>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
SO_REUSEADDR should be avoided on Windows but is desired on other operating
systems. So instead of setting it we call socket_set_fast_reuse that will result
in the appropriate behaviour on all operating systems.
An exception to this rule are multicast sockets where it is sensible to have
multiple sockets listen on the same ip and port and we should set SO_REUSEADDR
on windows.
Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Each networking client has a queue for packets that could not yet be
delivered to that client. Calling this queue "send_queue" is highly
confusing as it has nothing to to with packets send from this client but
to it. Avoid this confusing by renaming it to "incoming_queue".
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The following patch simplifies the *BSD tap/tun code and makes use of numbered
tap/tun interfaces on all *BSD OS's. NetBSD has a patch in their pkgsrc tree
to make use of this feature and DragonFly also supports this as well.
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
include/qemu/timer.h has no need to include main-loop.h and
doing so causes an issue for the next patch. Unfortunately
various files assume including timers.h will pull in main-loop.h.
Untangle this mess.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The macro g_assert_not_reached is a better self documenting replacement
for assert(0) or assert(false).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently macvtap based macvlan device is working in promiscuous
mode, we want to implement mac-programming over macvtap through
Libvirt for better performance.
Design:
QEMU notifies Libvirt when rx-filter config is changed in guest,
then Libvirt query the rx-filter information by a monitor command,
and sync the change to macvtap device. Related rx-filter config
of the nic contains main mac, rx-mode items and vlan table.
This patch adds a QMP event to notify management of rx-filter change,
and adds a monitor command for management to query rx-filter
information.
Test:
If we repeatedly add/remove vlan, and change macaddr of vlan
interfaces in guest by a loop script.
Result:
The events will flood the QMP client(management), management takes
too much resource to process the events.
Event_throttle API (set rate to 1 ms) can avoid the events to flood
QMP client, but it could cause an unexpected delay (~1ms), guests
guests normally expect rx-filter updates immediately.
So we use a flag for each nic to avoid events flooding, the event
is emitted once until the query command is executed. The flag
implementation could not introduce unexpected delay.
There maybe exist an uncontrollable delay if we let Libvirt do the
real change, guests normally expect rx-filter updates immediately.
But it's another separate issue, we can investigate it when the
work in Libvirt side is done.
Michael S. Tsirkin: tweaked to enable events on start
Michael S. Tsirkin: fixed not to crash when no id
Michael S. Tsirkin: fold in patch:
"additional fixes for mac-programming feature"
Amos Kong: always notify QMP client if mactable is changed
Amos Kong: return NULL list if no net client supports rx-filter query
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
reorder slirp config options. first check the dns-server-address,
then check the first-dhcp-address. the original code was comparing
the first-dhcp-address with the default dns-server-address, not
the configured dns-server-address.
Signed-off-by: Bas van Sisseren <bas@quarantainenet.nl>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch forbid the following invalid parameters to tap:
1) fd and vhostfds were specified but vhostfd were not specified
2) vhostfds were specified but fds were not specified
3) fds and vhostfd were specified
For 1 and 2, net_init_tap_one() will still pass NULL as vhostfdname to
monitor_handle_fd_param(), which may crash the qemu.
Also remove the unnecessary has_fd check.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <shajnocz@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Only tap->vhostfd were checked net_init_tap_one(), but tap->vhostfds were
forgot, this will lead qemu to ignore all fds passed by management through
vhostfds, and tries to create vhost_net device itself. Fix by adding this check
also.
Reportyed-by: Michal Privoznik <mprivozn@redhat.com>
Cc: Michal Privoznik <mprivozn@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
assign_name() creates a name MODEL.NUM, where MODEL is the client's model,
and NUM is the number of MODELs that already exist.
Markus added NIC naming for non-VLAN clients in commit 53e51d85.
commit d33d93b2 incorrectly added a judgement of net-hub. It caused
net clients created with -netdev get same names.
eg:
# qemu-upstream -device virtio-net-pci,netdev=h1 -netdev tap,id=h1 \
-device virtio-net-pci,netdev=h2 -netdev tap,id=h2 ..
(qemu) info network
virtio-net-pci.0: index=0,type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:56
\ h1: index=0,type=tap,ifname=tap0,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
virtio-net-pci.0: index=0,type=nic,model=virtio-net-pci,macaddr=52:54:00:12:34:57
\ h2: index=0,type=tap,ifname=tap1,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
This patch removed the check of nic-hub, and created unique names for
all net clients that have same model.
v2: update commitlog & comments
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
chardev-frontends need to explictly check, increase and decrement the
avail_connections "property" of the chardev when they are not using a
qdev-chardev-property for the chardev.
This fixes things like:
qemu-kvm -chardev stdio,id=foo -device isa-serial,chardev=foo \
-mon chardev=foo
Working, where they should fail. Most of the changes here are due to
old hardware emulation code which is using serial_hds directly rather then
a qdev-chardev-property.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364412581-3672-3-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There are several code paths in net_init_socket() depending on how the
socket is created: file descriptor passing, UDP multicast, TCP, or UDP.
Some of these support both listen and connect.
Not all code paths set the socket to non-blocking. This patch addresses
the file descriptor passing and UDP cases which were missing
socket_set_nonblock(fd) calls.
I considered moving socket_set_nonblock(fd) to a central location but it
turns out the code paths are different enough to require non-blocking at
different places.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets.
Rename to qemu_set_nonblock() just like qemu_set_cloexec().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Socket buffer sizes were hard-coded to 4K for VDE and socket netdevs. Bump this
up to 68K (ala tap netdev) to handle maximum GSO packet size (64k) plus plenty
of room for the ethernet and virtio_net headers.
Originally, ran into this limitation when using -netdev UDP sockets to connect
VM-to-VM, where VM interface is configure with MTU=9000. (Using virtio_net
NIC model). Test is simple: ping -M do -s 8500 <target>. This test will
attempt to ping with unfragmented packet of given size. Without patch, size
is limited to < 4K (minus protocol hdrs). With patch, ping test works with pkt
size up to 9000 (again, minus protocol hdrs).
v2: per Stefan, increase buf size to (4096+65536) as done in tap and apply
to vde and socket netdevs.
v1: increase buf size to 12K just for -netdev UDP sockets
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
net_checksum_add_cont()
checksum calculation for scattered data with odd chunk sizes
net_raw_checksum()
checksum calculation for a buffer
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reduce -netdev socket latency by disabling the Nagle algorithm on
SOCK_STREAM sockets in net/socket.c. Since we are tunelling Ethernet
over TCP we shouldn't artificially delay outgoing packets, let the guest
decide packet scheduling.
I already get sub-millisecond -netdev socket ping times on localhost, so
there was no measurable difference in my testing. This won't hurt
though and may improve remote socket performance.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Fix various typos and misspellings. The bulk of these were found with
codespell.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of adding missing type casts which are needed by MinGW for the
4th argument, the patch uses qemu_setsockopt which was invented for this
purpose.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Edivaldo reports a problem that the array of NetClientState in NICState is too
large - MAX_QUEUE_NUM(1024) which will wastes memory even if multiqueue is not
used.
Instead of static arrays, solving this issue by allocating the queues on demand
for both the NetClientState array in NICState and VirtIONetQueue array in
VirtIONet.
Tested by myself, with single virtio-net-pci device. The memory allocation is
almost the same as when multiqueue is not merged.
Cc: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br>
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
historically the kernel queues packets two times. once
at the device and second in qdisc. this is believed to cause
interface stalls if one of these queues overruns.
setting IFF_ONE_QUEUE is the default in kernels >= 3.8. the
flag is ignored since then. see kernel commit
5d097109257c03a71845729f8db6b5770c4bbedc
Signed-off-by: Peter Lieven <pl@kamp.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Obviously, hub does not support multiqueue tap. So this patch forbids creating
multiple queue tap when hub is used to prevent the crash when command line such
as "-net tap,queues=2" is used.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In the current implementation of qemu, running without a network
backend will cause the queue to grow unbounded when the guest is
transmitting traffic.
This patch fixes the problem by implementing bounded size NetQueue,
used with an arbitrary limit of 10000 packets, and dropping packets
when the queue is full _and_ the sender does not pass a callback.
The second condition makes sure that we never drop packets that
contains a callback (which would be tricky, because the producer
expects the callback to be run when all previous packets have been
consumed; so we cannot run it when the packet is dropped).
If documentation is correct, producers that submit a callback should
stop sending when their packet is queued, so there is no real risk
that the queue exceeds the max size by large values.
Signed-off-by: Luigi Rizzo <rizzo@iet.unipi.it>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When frontend and backend are connected through a hub as below
(showing only one direction), and the frontend (or in general, all
output ports of the hub) cannot accept more traffic, the backend
queues packets in queue-A.
When the frontend (or in general, one output port) becomes ready again,
quemu tries to flush packets from queue-B, which is unfortunately empty.
e1000.0 <--[queue B]-- hub0port0(hub)hub0port1 <--[queue A]-- tap.0
To fix this i propose to introduce a new function net_hub_flush()
which is called when trying to flush a queue connected to a hub.
Signed-off-by: Luigi Rizzo <rizzo@iet.unipi.it>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The pSeries machine and some other devices don't supply a cleanup
callback. Revert part of 1ceef9f273 that
started calling it unconditionally.
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1360707366-9271-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
1ceef9f273 added handling for cleaning
up multiple queues in qemu_del_nic() for cases where multiqueue is in
use. To determine the number of queues it looks at nic->conf->queues,
then iterates through all the queues to cleanup the associated
NetClientStates. If no queues are found, no NetClientStates are deleted.
However, nic->conf->queues is only set when a peer is created via
-netdev or netdev_add, and is otherwise 0. This causes us to spin in
net_cleanup() if we attempt to shut down qemu before adding a host
device.
Since qemu_new_nic() unconditionally creates at least 1
queue/NetClientState at queue idx 0, make qemu_del_nic() always attempt
to clean it up.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The multiqueue patch series broke -netdev tap,fd=X which manifests
as libvirt not being able to start a guest. This was because it
passed NULL for the netdev name which results in an anonymous netdev
device regardless of what the user specified.
Cc: Jason Wang <jasowang@redhat.com>
Cc: Bruce Rogers <brogers@suse.com>
Reported-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Recently, linux support multiqueue tap which could let userspace call TUNSETIFF
for a signle device many times to create multiple file descriptors as
independent queues. User could also enable/disabe a specific queue through
TUNSETQUEUE.
The patch adds the generic infrastructure to create multiqueue taps. To achieve
this a new parameter "queues" were introduced to specify how many queues were
expected to be created for tap by qemu itself. Alternatively, management could
also pass multiple pre-created tap file descriptors separated with ':' through a
new parameter fds like -netdev tap,id=hn0,fds="X:Y:..:Z". Multiple vhost file
descriptors could also be passed in this way.
Each TAPState were still associated to a tap fd, which mean multiple TAPStates
were created when user needs multiqueue taps. Since each TAPState contains one
NetClientState, with the multiqueue nic support, an N peers of NetClientState
were built up.
A new parameter, mq_required were introduce in tap_open() to create multiqueue
tap fds.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch introduces a helper tap_get_ifname() to get the device name of tap
device. This is needed when ifname is unspecified in the command line and qemu
were asked to create tap device by itself. In this situation, the name were
allocated by kernel, so if multiqueue is asked, we need to fetch its name after
creating the first queue.
Only linux has this support since it's the only platform that supports
multiqueue tap.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch introduce a new bit - enabled in TAPState which tracks whether a
specific queue/fd is enabled. The tap/fd is enabled during initialization and
could be enabled/disabled by tap_enalbe() and tap_disable() which calls platform
specific helpers to do the real work. Polling of a tap fd can only done when
the tap was enabled.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch add basic multiqueue support for Linux. When multiqueue is needed, we
will first check whether kernel support multiqueue tap before creating more
queues. Two new functions tap_fd_enable() and tap_fd_disable() were introduced
to enable and disable a specific queue. Since the multiqueue is only supported
in Linux, return error on other platforms.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch factors out the common initialization of tap into a new helper
net_init_tap_one(). This will be used by multiqueue tap patches.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Import multiqueue constants from if_tun.h from 3.8-rc3. A new ifr flag
IFF_MULTI_QUEUE were introduced to create a multiqueue backend by calling
TUNSETIFF with the this flag and with the same interface name many times.
A new ioctl TUNSETQUEUE were introduced. When doing this ioctl with
IFF_DETACH_QUEUE, the queue were disabled in the linux kernel. When doing this
ioctl with IFF_ATTACH_QUEUE, the queue were enabled in the linux kernel.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds basic multiqueue support for qemu. The idea is simple, an array
of NetClientStates were introduced in NICState, parse_netdev() were extended to
find and match all NetClientStates belongs to the backend and place their
pointers in NICConf. Then qemu_new_nic can setup a N:N mapping between NICStates
that belongs to a nic and NICStates belongs to the netdev. And a queue_index
were introduced in NetClientState to track its index. After this, each peers of
a NICState were abstracted as a queue.
After this change, all NetClientState that belongs to the same backend/nic has
the same id. When use want to change the link status, all NetClientStates that
belongs to the same backend/nic will be also changed. When user want to delete
a device or netdev, all NetClientStates that belongs to the same backend/nic
will be deleted also. Changing or deleting an specific queue is not allowed.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To allow allocating an array of NetClientState and free it once, this patch
introduces destructor of NetClientState. Which could do type specific free,
which could be used by multiqueue to free the array once.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch separates the setup of NetClientState from its allocation, this will
allow allocating an arrays of NetClientState and does the initialization one by
one which is what multiqueue needs.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In multiqueue, all NetClientState that belongs to the same netdev or nic has the
same id. So this patches introduces an helper qemu_find_net_clients_except()
which finds all NetClientState with the same id. This will be used by multiqueue
networking.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue nic, this patch separate the nic destructor from
qemu_del_net_client() to a new helper qemu_del_nic() since the mapping bettween
NiCState and NetClientState were not 1:1 in multiqueue. The following patches
would refactor this function to support multiqueue nic.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue, this patch introduces a helper qemu_get_nic() to get
NICState from a NetClientState. The following patches would refactor this helper
to support multiqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue, the patch introduce a helper qemu_get_queue()
which is used to get the NetClientState of a device. The following patches would
refactor this helper to support multiqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch change all info call back function to take
additional QDict * parameter, which allow those command
take parameter. Now it is set to NULL at default case.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
To fix building error:
CC net/vde.o
net/vde.c: In function ‘vde_cleanup’:
net/vde.c:65:5: error: implicit declaration of function ‘qemu_set_fd_handler’ [-Werror=implicit-function-declaration]
net/vde.c:65:5: error: nested extern declaration of ‘qemu_set_fd_handler’ [-Werror=nested-externs]
cc1: all warnings being treated as errors
Signed-off-by: Liming Wang <walimisdev@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These and some more compiler warnings were caused by a recent commit:
net/tap-win32.c:724: warning: no previous prototype for ‘tap_has_ufo’
net/tap-win32.c:729: warning: no previous prototype for ‘tap_has_vnet_hdr’
...
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* bonzini/header-dirs: (45 commits)
janitor: move remaining public headers to include/
hw: move executable format header files to hw/
fpu: move public header file to include/fpu
softmmu: move remaining include files to include/ subdirectories
softmmu: move include files to include/sysemu/
misc: move include files to include/qemu/
qom: move include files to include/qom/
migration: move include files to include/migration/
monitor: move include files to include/monitor/
exec: move include files to include/exec/
block: move include files to include/block/
qapi: move include files to include/qobject/
janitor: add guards to headers
qapi: make struct Visitor opaque
qapi: remove qapi/qapi-types-core.h
qapi: move inclusions of qemu-common.h from headers to .c files
ui: move files to ui/ and include/ui/
qemu-ga: move qemu-ga files to qga/
net: reorganize headers
net: move net.c to net/
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
