make -C mybuilddir no longer works (regression caused by commit)
388d475815.
PWD is the directory of the caller (not mybuilddir),
so BUILD_DIR is set to the wrong value.
GNU make sets CURDIR to the correct value.
Use this macro instead of PWD.
Cc: Lluís Vilanova <vilanova@ac.upc.edu>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This has been discussed before in the past. The special casing really makes no
sense anymore. This seems like a good change to make for 1.0.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch tries to cull any uneeded library dependencies from the guest
agent to improve portability across various distros. We do so by being
as explicit as possible about in-tree dependencies rather than relying
on existing *-obj-y targets, and by manually setting LIBS for the
qemu-ga target to avoid pulling in LIBS_TOOLS libraries discovered by
configure.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Distclean should remove anything created by the configure script.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
To run automated tests for coroutines:
make test-coroutine
./test-coroutine
On success the program terminates with exit status 0. On failure an
error message is written to stderr and the program exits with exit
status 1.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This fixes a build issue with make -j6+ due to qapi-generated files
being built before $(GENERATED_HEADERS) have been created.
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Create cscope symbols for assembly files in addition to .c/.h files.
Create cscope database with full path instead of relative path so cscope
can be used with CSCOPE_DB in any directory.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Add configure check for python, exit if not found. Add switches
for specifying the path to python, use the path in Makefile.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is the actual guest daemon, it listens for requests over a
virtio-serial/isa-serial/unix socket channel and routes them through
to dispatch routines, and writes the results back to the channel in
a manner similar to QMP.
A shorthand invocation:
qemu-ga -d
Is equivalent to:
qemu-ga -m virtio-serial -p /dev/virtio-ports/org.qemu.guest_agent.0 \
-f /var/run/qemu-ga.pid -d
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
GLib is an extremely common library that has a portable thread implementation
along with tons of other goodies.
GLib and GObject have a fantastic amount of infrastructure we can leverage in
QEMU including an object oriented programming infrastructure.
Short term, it has a very nice thread pool implementation that we could leverage
in something like virtio-9p. It also has a test harness implementation that
this series will use.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
No flag to configure is required. Instead, added a libcacard.la target that
is not built by default, only when requested explicitly via:
mkdir build
cd build
../configure
make libcacard.la
make install-libcacard
Uses libtool to do actual linking of object files and shared library, and
installing. Tested only under linux, but supposed to work on other systems as
well.
If libtool isn't found you get a message complaining about that, only at build
time (since it is not a default target I did not add a message at configure
time).
New build artifacts:
.libs subdirectories (at <buildroot> and <buildroot>/libcacard)
*.lo files (at same locations as the respective o files)
Added %.lo : %.c rule that uses libtool.
Updated clean rule to clean up those artifacts.
Added specific rule to call dtrace with libtool wrapper (note that because of
a current upstream dtrace bug fixed by systemtap b1568fd85 commit the -fPIC flag
isn't actually passed on. still current dtrace+libtool produced object links fine).
If libtool is missing any of the following targets will complain and exit 1:
any subdir: *.lo
root and libcacard: libcacard.la, libcacard-instsall
Tested to link and load with all tracing backends.
We don't install mpc8544ds.dtb, which means that -M mpc8544ds doesn't
work when installed. Fix it by installing the file.
Signed-off-by: Alexander Graf <agraf@suse.de>
libcacard emulates a Common Access Card (CAC) which is a standard
for smartcards. It is used by the emulated ccid card introduced in
a following patch. Docs are available in docs/libcacard.txt
Signed-off-by: Alon Levy <alevy@redhat.com>
---
changes from v24->v25:
* Fix out of tree builds.
* Fix build with linux-user targets.
changes from v23->v24: (Jes Sorensen review 2)
* Makefile.target: use obj-$(CONFIG_*) +=
* remove unrequired includes, include qemu-common before qemu-thread
* required adding #define NO_NSPR_10_SUPPORT (harmless)
changes from v22->v23:
* configure fixes: (reported by Stefan Hajnoczi)
* test a = b, not a == b (second isn't portable)
* quote $source_path in case it contains spaces
- this doesn't really help since there are many other places
that need similar fixes, not introduced by this patch.
changes from v21->v22:
* fix configure to not link libcacard if nss not found
(reported by Stefan Hajnoczi)
* fix vscclient linkage with simpletrace backend
(reported by Stefan Hajnoczi)
* card_7816.c: add missing break in ERROR_DATA_NOT_FOUND
(reported by William van de Velde)
changes from v20->v21: (Jes Sorensen review)
* use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc
and qemu_free), error_report
* assert instead of ASSERT
* cosmetic fixes
* use strpbrk and isspace
* add --disable-nss --enable-nss here, instead of in the final patch.
* split vscclient, passthru and docs to following patches.
changes from v19->v20:
* checkpatch.pl
changes from v15->v16:
Build:
* don't erase self with distclean
* fix make clean after make distclean
* Makefile: make vscclient link quiet
Behavioral:
* vcard_emul_nss: load coolkey in more situations
* vscclient:
* use hton,ntoh
* send init on connect, only start vevent thread on response
* read payload after header check, before type switch
* remove Reconnect
* update for vscard_common changes, empty Flush implementation
Style/Whitespace:
* fix wrong variable usage
* remove unused variable
* use only C style comments
* add copyright header
* fix tabulation
Signed-off-by: Alon Levy <alevy@redhat.com>
libcacard: fix out of tree builds
Currently, the emulated pSeries machine requires the use of the
-kernel parameter in order to explicitly load a guest kernel. This
means booting from the virtual disk, cdrom or network is not possible.
This patch addresses this limitation by inserting a within-partition
firmware image (derived from the "SLOF" free Open Firmware project).
If -kernel is not specified, qemu will now load the SLOF image, which
has access to the qemu boot device list through the device tree, and
can boot from any of the usual virtual devices.
In order to support the new firmware, an extension to the emulated
machine/hypervisor is necessary. Unlike Linux, which expects
multi-CPU entry to be handled kexec() style, the SLOF firmware expects
only one CPU to be active at entry, and to use a hypervisor RTAS
method to enable the other CPUs one by one.
This patch also implements this 'start-cpu' method, so that SLOF can
start the secondary CPUs and marshal them into the kexec() holding
pattern ready for entry into the guest OS. Linux should, and in the
future might directly use the start-cpu method to enable initially
disabled CPUs, but for now it does require kexec() entry.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
On pSeries machines, operating systems can instantiate "RTAS" (Run-Time
Abstraction Services), a runtime component of the firmware which implements
a number of low-level, infrequently used operations. On logical partitions
under a hypervisor, many of the RTAS functions require hypervisor
privilege. For simplicity, therefore, hypervisor systems typically
implement the in-partition RTAS as just a tiny wrapper around a hypercall
which actually implements the various RTAS functions.
This patch implements such a hypercall based RTAS for our emulated pSeries
machine. A tiny in-partition "firmware" calls a new hypercall, which
looks up available RTAS services in a table.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add the first Microblaze little endian platform.
Platform uses uart16550, axi ethernet, timer, intc.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
Just compiled from vgabios git repo @ git.qemu.org,
copyed over and committed. Also added to the list
of blobs in the Makefile.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Patching the rom data during load (in qemu) now
also supports i82801 (which had no rom file).
We only need a single rom file for the whole device family,
so remove the second one which is no longer needed.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This introduces a new tracing backend that targets the SystemTAP
implementation of DTrace userspace tracing. The core functionality
should be applicable and standard across any DTrace implementation
on Solaris, OS-X, *BSD, but the Makefile rules will likely need
some small additional changes to cope with OS specific build
requirements.
This backend builds a little differently from the other tracing
backends. Specifically there is no 'trace.c' file, because the
'dtrace' command line tool generates a '.o' file directly from
the dtrace probe definition file. The probe definition is usually
named with a '.d' extension but QEMU uses '.d' files for its
external makefile dependancy tracking, so this uses '.dtrace' as
the extension for the probe definition file.
The 'tracetool' program gains the ability to generate a trace.h
file for DTrace, and also to generate the trace.d file containing
the dtrace probe definition.
Example usage of a dtrace probe in systemtap looks like:
probe process("qemu").mark("qemu_malloc") {
printf("Malloc %d %p\n", $arg1, $arg2);
}
* .gitignore: Ignore trace-dtrace.*
* Makefile: Extra rules for generating DTrace files
* Makefile.obj: Don't build trace.o for DTrace, use
trace-dtrace.o generated by 'dtrace' instead
* tracetool: Support for generating DTrace data files
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This introduces a new tracing backend that targets the SystemTAP
implementation of DTrace userspace tracing. The core functionality
should be applicable and standard across any DTrace implementation
on Solaris, OS-X, *BSD, but the Makefile rules will likely need
some small additional changes to cope with OS specific build
requirements.
This backend builds a little differently from the other tracing
backends. Specifically there is no 'trace.c' file, because the
'dtrace' command line tool generates a '.o' file directly from
the dtrace probe definition file. The probe definition is usually
named with a '.d' extension but QEMU uses '.d' files for its
external makefile dependancy tracking, so this uses '.dtrace' as
the extension for the probe definition file.
The 'tracetool' program gains the ability to generate a trace.h
file for DTrace, and also to generate the trace.d file containing
the dtrace probe definition.
Example usage of a dtrace probe in systemtap looks like:
probe process("qemu").mark("qemu_malloc") {
printf("Malloc %d %p\n", $arg1, $arg2);
}
* .gitignore: Ignore trace-dtrace.*
* Makefile: Extra rules for generating DTrace files
* Makefile.obj: Don't build trace.o for DTrace, use
trace-dtrace.o generated by 'dtrace' instead
* tracetool: Support for generating DTrace data files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This moves library functions used by both QEMU and the QEMU tools,
such as qemu-img, qemu-nbd etc. from osdep.c to oslib-{posix,win32}.c
In addition it introduces oslib-obj.y to the Makefile set to be
included by the various targets, instead of relying on these library
functions magically getting included via block-obj-y.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All files include qemu-options.h which pulls in qemu-options.def from
the root directory. Thus generating qemu-options.def from Makefile.objs
under the target directory is not effective.
Further, people expect .def file to get cleaned with make clean:
it does not have state so no reason to defer removing it
until distclean. Also add a rule to remove old files that might
be around.
This fixes the error: ‘QEMU_OPTION_spice’ undeclared
(first use in this function) error that some people reported
which is really down to an out of date .def file.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move timer init functions to a new file, qemu-timer-common.c. Make other
critical timer functions inlined to preserve performance in
qemu-timer.c, also move muldiv64() (used by the inline functions)
to qemu-timer.h.
Adjust block/raw-posix.c and simpletrace.c to use get_clock() directly.
Remove a similar/duplicate definition in qemu-tool.c.
Adjust hw/omap_clk.c to include qemu-timer.h because muldiv64() is used
there.
After this change, tracing can be used also for user code and
simpletrace on Win32.
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qemu_malloc instrumentations require linking against the trace objects.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
