Use a better interface for random numbers than rand() * 3.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use a better interface for random numbers than rand * 16.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When not using -seed, we will use the crypto subsystem
for random numbers.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the -seed option is given, call qemu_guest_random_seed_main,
putting the subsystem into deterministic mode. Pass derived seeds
to each cpu created during clone; which is a no-op unless the
subsystem is in deterministic mode.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Record the software fp control register, as set by the
osf_setsysinfo syscall. Add those masked exceptions
to fpcr_exc_enable. Do not raise a signal for masked
fp exceptions.
Fixes: https://bugs.launchpad.net/bugs/1701835
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-7-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Changes to slirp/ dropped, as we're about to spin it off]
Reuse of the same guard symbol in multiple headers is okay as long as
they cannot be included together. scripts/clean-header-guards.pl
can't tell, so it warns.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
${target^^}_${fname^^} for linux-user/$target/$fname, just like we did
in commit a9c94277f0..3500385697.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When linux-user/exit was introduced we failed to move the gprof
include at the same time. The CI didn't notice because it only builds
system emulation. Fix it for those that still find gprof useful.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-Id: <20190502092728.32727-1-alex.bennee@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The guest tends to get confused when it receives signals it doesn't
know about. Given the gprof magic has also set up it's own handler we
would do well to avoid stomping on it as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190502145846.26226-1-alex.bennee@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some PT_LOAD segments may be completely zeroed out and their p_filesize
is zero, in that case the loader should just allocate a page that's at
least p_memsz bytes large (plus eventual alignment padding).
Calling zero_bss does this job for us, all we have to do is make sure we
don't try to mmap a zero-length page.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190503122007.lkjsvztgt4ycovac@debian>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In file included from /usr/include/string.h:494,
from include/qemu/osdep.h:101,
from linux-user/uname.c:20:
In function ‘strncpy’,
inlined from ‘sys_uname’ at linux-user/uname.c:94:3:
/usr/include/bits/string_fortified.h:106:10: warning: ‘__builtin_strncpy’ output may be truncated copying 64 bytes from a string of length 64 [-Wstringop-truncation]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We don't care where the NUL terminator in the original uname
field was. It suffices to copy the entire original field and
simply force a NUL terminator at the end of the new field.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190501144646.4851-1-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix this warning when building with GCC9 on Fedora 30:
In function ‘strncpy’,
inlined from ‘fill_psinfo’ at /home/alistair/qemu/linux-user/elfload.c:3208:12,
inlined from ‘fill_note_info’ at /home/alistair/qemu/linux-user/elfload.c:3390:5,
inlined from ‘elf_core_dump’ at /home/alistair/qemu/linux-user/elfload.c:3539:9:
/usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ specified bound 16 equals destination size [-Werror=stringop-truncation]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <c4d2b1de9efadcf1c900b91361af9302823a72a9.1556666645.git.alistair.francis@wdc.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When running ssh over IPv6 with linux-user I faced this warning:
Unsupported setsockopt level=41 optname=67
setsockopt IPV6_TCLASS 32: Protocol not available:
This patch adds code to the linux-user emulatation for setting and
retrieving of a few missing IPV6 options, including IPV6_TCLASS.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It's either "GNU *Library* General Public License version 2" or "GNU
Lesser General Public License version *2.1*", but there was no "version
2.0" of the "Lesser" license. So assume that version 2.1 is meant here.
Message-Id: <1550073530-4138-1-git-send-email-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's either "GNU *Library* General Public License version 2" or "GNU
Lesser General Public License version *2.1*", but there was no "version
2.0" of the "Lesser" license. So assume that version 2.1 is meant here.
Acked-by: Stafford Horne <shorne@gmail.com>
Message-Id: <1550073577-4248-1-git-send-email-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "model[,option...]" string parsed by the function is not just
a CPU model. Rename the function and its argument to indicate it
expects the full "-cpu" option to be provided.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190417025944.16154-2-ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it. Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().
The callback gets passed around a lot, which is tiresome. The
type-punning around monitor_fprintf() is ugly.
Drop the callback, and call qemu_fprintf() instead. Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
The various TARGET_cpu_list() take an fprintf()-like callback and a
FILE * to pass to it. Their callers (vl.c's main() via list_cpus(),
bsd-user/main.c's main(), linux-user/main.c's main()) all pass
fprintf() and stdout. Thus, the flexibility provided by the (rather
tiresome) indirection isn't actually used.
Drop the callback, and call qemu_printf() instead.
Calling printf() would also work, but would make the code unsuitable
for monitor context without making it simpler.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-10-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This commit adds a error_init() helper which calls
g_log_set_default_handler() so that glib logs (g_log, g_warning, ...)
are handled similarly to other QEMU logs. This means they will get a
timestamp if timestamps are enabled, and they will go through the
HMP monitor if one is configured.
This commit also adds a call to error_init() to the binaries
installed by QEMU. Since error_init() also calls error_set_progname(),
this means that *-linux-user, *-bsd-user and qemu-pr-helper messages
output with error_report, info_report, ... will slightly change: they
will be prefixed by the binary name.
glib debug messages are enabled through G_MESSAGES_DEBUG similarly to
the glib default log handler.
At the moment, this change will mostly impact SPICE logging if your
spice version is >= 0.14.1. With older spice versions, this is not going
to work as expected, but will not have any ill effect, so this call is
not conditional on the SPICE version.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190131164614.19209-3-cfergeau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The glibc-2.29.9000-6.fc31.x86_64 package finally includes the gettid()
function as part of unistd.h when __USE_GNU is defined. This clashes
with linux-user code which unconditionally defines this function name
itself.
/home/berrange/src/virt/qemu/linux-user/syscall.c:253:16: error: static declaration of ‘gettid’ follows non-static declaration
253 | _syscall0(int, gettid)
| ^~~~~~
/home/berrange/src/virt/qemu/linux-user/syscall.c:184:13: note: in definition of macro ‘_syscall0’
184 | static type name (void) \
| ^~~~
In file included from /usr/include/unistd.h:1170,
from /home/berrange/src/virt/qemu/include/qemu/osdep.h:107,
from /home/berrange/src/virt/qemu/linux-user/syscall.c:20:
/usr/include/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here
34 | extern __pid_t gettid (void) __THROW;
| ^~~~~~
CC aarch64-linux-user/linux-user/signal.o
make[1]: *** [/home/berrange/src/virt/qemu/rules.mak:69: linux-user/syscall.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:449: subdir-aarch64-linux-user] Error 2
While we could make our definition conditional and rely on glibc's impl,
this patch simply renames our definition to sys_gettid() which is a
common pattern in this file.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190320161842.13908-3-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The gettid syscall was introduced in Linux 2.4.11. This is old enough
that we can assume it always exists and thus not bother with the
conditional backcompat logic.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190320161842.13908-2-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of cleanup-trace-events.pl. Same funnies as in the
previous commit, of course. Manually shorten its change to
linux-user/trace-events to */signal.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-6-armbru@redhat.com
Message-Id: <20190314180929.27722-6-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This change checks elf_flags for EF_RISCV_RVE and if
present uses the RVE linux syscall ABI which uses t0
for the syscall number instead of a7.
Warn and exit if a non-RVE ABI binary is run on a
cpu with the RVE extension as it is incompatible.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Co-authored-by: Kito Cheng <kito.cheng@gmail.com>
Co-authored-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add QEMU_IFLA_BR_VLAN_STATS_PER_PORT (from linux v4.20),
QEMU_IFLA_BR_MULTI_BOOLOPT (from linux v5.0).
The first new entry fixes the following error:
Unknown QEMU_IFLA_BR type 45
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190306200925.17605-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fixes:
/home/elmarco/src/qemu/linux-user/syscall.c: In function ‘do_ioctl_rt’:
/home/elmarco/src/qemu/linux-user/syscall.c:4773:9: error: ‘host_rt_dev_ptr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (*host_rt_dev_ptr != 0) {
^~~~~~~~~~~~~~~~
/home/elmarco/src/qemu/linux-user/syscall.c:4774:9: error: ‘target_rt_dev_ptr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
unlock_user((void *)*host_rt_dev_ptr,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*target_rt_dev_ptr, 0);
~~~~~~~~~~~~~~~~~~~~~~
Based on previous discussion from patch "linux-users/syscall: make
do_ioctl_rt safer" by Alex Bennée.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190305151500.25038-1-marcandre.lureau@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
A zero-length read still needs to do the usual checks, thus it may return
errors like EBADF. This makes the read syscall emulation consistent with
the pread64 syscall emulation.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvm5zsxz2we.fsf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Nios II user-mode emulation was missing handling for EXCP_DEBUG,
making the gdb stub essentially useless. This patch adds the missing
piece. The new code was copied from the existing EXCP_TRAP handling
and is also similar to what other targets (e.g., arm) do with EXCP_DEBUG.
Signed-off-by: Sandra Loosemore <sandra@codesourcery.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1550076626-7202-1-git-send-email-sandra@codesourcery.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
System calls that return a socket address do so by writing the (possibly
truncated) address into the provided buffer space, but setting the
addrlen parameter to the actual size of the address. To determine how
much to copy back to the target memory the emulation needs to remember
the incoming value of the addrlen parameter, so that it doesn't write
past the buffer limits.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvmimxmppcj.fsf_-_@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The 32-bit kernel has strings for v4, v5, v6, v7, v7m.
The 64-bit kernel, in compat mode, has strings for v8.
Fixes: https://bugs.launchpad.net/bugs/1813034
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190212074840.13542-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Set msg_flags in the returned struct msghdr.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <mvmimxprmn8.fsf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190301200501.16533-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190219222952.22183-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The license information in these files is rather confusing. The text
declares LGPL first, but then says that contributions after 2012 are
licensed under the GPL instead. How should the average user who just
downloaded the release tarball know which part is now GPL and which
is LGPL?
Looking at the text of the LGPL (see COPYING.LIB in the top directory),
the license clearly states how this should be done instead:
"3. You may opt to apply the terms of the ordinary GNU General Public
License instead of this License to a given copy of the Library. To do
this, you must alter all the notices that refer to this License, so
that they refer to the ordinary GNU General Public License, version 2,
instead of to this License."
Thus let's clean up the confusing statements and use the proper GPL
text only.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1549456893-16589-1-git-send-email-thuth@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Userspace programs should (in theory) query the ELF HWCAP before
probing these registers. Now we have implemented them all make it
public.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190205190224.2198-6-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Completely rewrite conditional stores handling. Use cmpxchg.
This eliminates need for separate implementations of SC instruction
emulation for user and system emulation.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* Add riscv prefix to raise_exception function
* Add riscv prefix to CSR read/write functions
* Add riscv prefix to signal handler function
* Add riscv prefix to get fflags function
* Remove redundant declaration of riscv_cpu_init
and rename cpu_riscv_init to riscv_cpu_init
* rename riscv_set_mode to riscv_cpu_set_mode
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Coverity warns (CID 1390634) that open_net_route() is not
checking the return value from sscanf(), which means that
it might then use values that aren't initialized.
Errors here should in general not happen since we're passing
an assumed-good /proc/net/route from the host kernel, but
if we do fail to parse a line then just skip it in the output
we pass to the guest.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190205174207.9278-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Summary:
This is to fix bug https://bugs.launchpad.net/qemu/+bug/1796754.
It is valid for ifc_buf to be NULL according to
http://man7.org/linux/man-pages/man7/netdevice.7.html.
Signed-off-by: Kan Li <likan_999.student@sina.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20181024201303.114-1-likan_999.student@sina.com>
[lv: fix errors reported by checkpatch.pl]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190201195404.30486-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Initialize the keys to a non-zero value on process start.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's either "GNU *Library* General Public License version 2" or
"GNU Lesser General Public License version *2.1*", but there was
no "version 2.0" of the "Lesser" license. So assume that version
2.1 is meant here.
Also some files mention the GPL instead of the LGPL after declaring
that the files are licensed under the LGPL, so change these spots to
use LGPL, too.
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1548769438-28942-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
