PCI hotplug for bridges was introduced only since 2.0 however
acpi_set_bsel()->object_property_add_uint32_ptr(bus, ACPI_PCIHP_PROP_BSEL)
didn't take in account that for legacy mode (1.7) when
PCI hotplug for bridges is unavailable and ACPI_PCIHP_PROP_BSEL property
the only bus "PCI.0' has been created earlier at acpi_pcihp_init() time.
We managed to live with it only because of error rised by adding
a duplicate property in acpi_set_bsel() has been ignored which
resulted in useless leaking of just allocated (int)bus_bsel.
Issue affects only 1.7 machine type as ACPI tables supported by
QEMU were introduced at that time, but there wasn't PCI hotplug
for bridges till the next release (2.0).
Fix it by removing duplicate ACPI_PCIHP_PROP_BSEL intialization
in acpi_pcihp_init() and doing it only in one place acpi_set_pci_info().
PS:
do not ignore error returned by object_property_add_uint32_ptr()
and abort QEMU since it's programming error which should be fixed
instead of being ignored.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1470211497-116801-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ Marc-André - Remove now unused ACPI_PCIHP_LEGACY_SIZE ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
make sure that external callers won't try to modify
possible_cpus and owner of possible_cpus can access
it directly when it modifies it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1484759609-264075-5-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Useful to send guest data back to QEMU.
Changes from Laszlo Ersek <lersek@redhat.com>:
- rebase the patch from Michael Tsirkin's original postings at [1] and [2]
to the following patches:
- loader: Allow a custom AddressSpace when loading ROMs
- loader: Add AddressSpace loading support to uImages
- loader: fix handling of custom address spaces when adding ROM blobs
- reject such writes immediately that would exceed the end of the array,
rather than performing a partial write before setting the error bit: see
the (len != dma.length) condition
- document the write interface
[1] http://lists.nongnu.org/archive/html/qemu-devel/2016-02/msg04968.html
[2] http://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg02735.html
Cc: "Gabriel L. Somlo" <somlo@cmu.edu>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: qemu-arm@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
That reduces DSDT by 910 bytes when memory hotplug
isn't enabled.
While doing so drop intermediate variables/arguments
passing around ACPI_MEMORY_HOTPLUG_IO_LEN and making
it local to memory_hotplug.c, hardcoding it there as
it can't change.
Also don't pass around ACPI_MEMORY_HOTPLUG_BASE through
intermediate variables/arguments where it's not needed.
Instead initialize in module static variable when MMIO
region is mapped and use that within memory_hotplug.c
whenever it's required.
That way MMIO base specified only at one place and AML
with MMIO would always use the same value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
>From this patch all the memory hotplug related AML
bits are consolidated in one place within DSTD.
Follow up patches will utilize that to simplify
memory hotplug related C/AML code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
It consolidates memory hotplug AML in one place within DSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This patch provides ATSR which was a requirement for software that
wants to enable ATS on endpoint devices behind a Root Port. This is
done simply by setting ALL_PORTS which indicates all PCI-Express Root
Ports support ATS transactions.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.
Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [crisµblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Commit 3e76099aac ("loader: Allow a custom AddressSpace when loading
ROMs") introduced the "Rom.as" field:
(1) It modified the utility callers of rom_insert() to take "as" as a
new parameter from *their* callers, and set "rom->as" from that
parameter. The functions covered were rom_add_file() and
rom_add_elf_program().
(2) It also modified rom_insert() itself, to auto-assign
"&address_space_memory", in case the external caller passed -- and
the utility caller forwarded -- as=NULL.
Except, commit 3e76099aac forgot to update the third utility caller of
rom_insert(), under point (1), namely rom_add_blob().
* Later, commit 5e774eb3bd ("loader: Add AddressSpace loading support
to uImages") added the load_uimage_as() function, and the
rom_add_blob_fixed_as() function-like macro, with the necessary changes
elsewhere to propagate the new "as" parameter to rom_add_blob():
load_uimage_as()
load_uboot_image()
rom_add_blob_fixed_as()
rom_add_blob()
At this point, the signature (and workings) of rom_add_blob() had been
broken already, and the rom_add_blob_fixed_as() macro passed its "_as"
parameter to rom_add_blob() as "callback_opaque". Given that the
"fw_callback" parameter itself was set to NULL (correctly), this did no
additional damage (the opaque arg would never be used), but ultimately
it broke the new functionality of load_uimage_as().
* The load_uimage_as() function would be put to use in one of the later
patches, commit e481a1f63c ("generic-loader: Add a generic loader").
* We can fix this only in a unified patch now. Append "AddressSpace *as"
to the signature of rom_add_blob(), and handle the new parameter. Pass
NULL from all current callers, except from rom_add_blob_fixed_as(),
where "_as" has to be bumped to the proper position.
* Note that rom_add_file() rejects the case when both "mr" and "as" are
passed in as non-NULL. The action that this is apparently supposed to
prevent is the
rom->mr = mr;
assignment (that's the only place where the "mr" parameter is used in
rom_add_file()). In rom_add_blob() though, we have no "mr" parameter,
and the actions done on the fw_cfg branch:
if (fw_file_name && fw_cfg) {
if (mc->rom_file_has_mr) {
data = rom_set_mr(rom, OBJECT(fw_cfg), devpath);
mr = rom->mr;
} else {
data = rom->data;
}
reflect those that are performed by rom_add_file() too (with mr==NULL):
if (rom->fw_file && fw_cfg) {
if ((!option_rom || mc->option_rom_has_mr) &&
mc->rom_file_has_mr) {
data = rom_set_mr(rom, OBJECT(fw_cfg), devpath);
} else {
data = rom->data;
}
Hence we need no additional restrictions in rom_add_blob().
* Stable is not affected as both problematic commits appeared first in
v2.8.0-rc0.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: qemu-arm@nongnu.org
Cc: qemu-devel@nongnu.org
Fixes: 3e76099aac
Fixes: 5e774eb3bd
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The code that calculates the legacy ACPI table size for migration
compatibility uses max_cpus when calculating legacy_aml_len (the size of
the DSDT and SSDT tables). However, the SSDT grows according to APIC ID
limit, not max_cpus.
The bug is not triggered very often because of the 4k alignment on the
table size. But it can be triggered if you are unlucky enough to cross a
4k boundary.
Change the legacy_aml_len calculation to use apic_id_limit, to calculate
the right size.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We should not use cpu_to_le16() here, instead each of device/function
value is stored in a 8 byte field.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce this field to control whether ACPI build is enabled by a
particular machine or accelerator.
It defaults to true if the machine itself supports ACPI build. Xen
accelerator will disable it because Xen is in charge of building ACPI
tables for the guest.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
_GPE.E04 is dedicated for nvdimm device hotplug
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The buffer is used to save the FIT info for all the presented nvdimm
devices which is updated after the nvdimm device is plugged or
unplugged. In the later patch, it will be used to construct NVDIMM
ACPI _FIT method which reflects the presented nvdimm devices after
nvdimm hotplug
As FIT buffer can not completely mapped into guest address space,
OSPM will exit to QEMU multiple times, however, there is the race
condition - FIT may be changed during these multiple exits, so that
some rules are introduced:
1) the user should hold the @lock to access the buffer and
2) mark @dirty whenever the buffer is updated.
@dirty is cleared for the first time OSPM gets fit buffer, if
dirty is detected in the later access, OSPM will restart the
access
As fit should be updated after nvdimm device is successfully realized
so that a new hotplug callback, post_hotplug, is introduced
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For each NVDIMM present or intended to be supported by platform,
platform firmware also exposes an ACPI Namespace Device under
the root device
So it builds nvdimm devices for all slots to support vNVDIMM hotplug
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some files contain multiple #includes of the same header file.
Removed most of those unnecessary duplicate entries using
scripts/clean-includes.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Anand J <anand.indukala@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace repeated pattern
for (i = 0; i < nb_numa_nodes; i++) {
if (test_bit(idx, numa_info[i].node_cpu)) {
...
break;
with a helper function to lookup numa node index for cpu.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add IVRS table for AMD IOMMU. Generate IVRS or DMAR
depending on emulated IOMMU.
Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The free_ranges array is used as a temporary pointer array, the segment
should still be freed, however, it shouldn't free the elements themself.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
In build_crs(), the calculation and merging of the ranges already happens
in 64-bit, but the entry boundaries are silently truncated to 32-bit in the
call to aml_dword_memory(). Fix it by handling the 64-bit MMIO ranges separately.
This fixes 64-bit BARs behind PXBs.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of always passing both IO and MEM ranges when
computing CRS ranges, define a new CrsRangeSet structure
that include them both.
This is done before introducing a third type of range,
64-bit MEM, so it will be easier to pass them all around.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PXBs do not support hotplug so they don't have a PCNT function.
Since the PXB's PCI root-bus is a child bus of bus 0, the
build_dsdt code will add a call to the corresponding PCNT function.
Fix this by skipping the PCNT call for the above case.
While at it skip also PCIe child buses.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To enable interrupt remapping for intel IOMMU device, each IOAPIC device
in the system reported via ACPI MADT must be explicitly enumerated under
one specific remapping hardware unit. This patch adds the root-complex
IOAPIC into the default DMAR device.
Please refer to VT-d spec 8.3.1.1 for more information.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In ACPI DMA remapping report structure, enable INTR flag when specified.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of searching the device tree every time, one static variable is
declared for the default system x86 IOMMU device.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Users of struct Range mess liberally with its members, which makes
refactoring hard. Create a set of methods, and convert all users to
call them instead of accessing members. The methods have carefully
worded contracts, and use assertions to check them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PcPciInfo has two (ill-named) members: Range w32 is the PCI hole, and
w64 is the PCI64 hole.
Three users:
* I440FXState and MCHPCIState have a member PcPciInfo pci_info, but
only pci_info.w32 is actually used. This is confusing. Replace by
Range pci_hole.
* acpi_build() uses auto PcPciInfo pci_info to forward both PCI holes
from acpi_get_pci_info() to build_dsdt(). Replace by two variables
Range pci_hole, pci_hole64. Rename acpi_get_pci_info() to
acpi_get_pci_holes().
PcPciInfo is now unused; drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
PCMachineState.node_cpu was used for mapping APIC ID
to numa node id as CPU entries in SRAT used to be
built on sparse APIC ID bitmap (up to apic_id_limit).
However since commit
5803fce pc: acpi: SRAT: create only valid processor lapic entries
CPU entries in SRAT aren't build using apic bitmap
but using 0..maxcpus index instead which is also used
for creating numa_info[x].node_cpu map.
So instead of doing useless intermediate conversion from
1. node by cpu index -> node by apic id
i.e. numa_info[x].node_cpu -> PCMachineState.node_cpu
2. apic id -> srat entry PMX
PCMachineState.node_cpu[apic id] -> PMX value
use numa_info[x].node_cpu map directly like ARM does and do
1. numa_info[x].node_cpu -> PMX value using index
in range 0..maxcpus
and drop not necessary PCMachineState.node_cpu and related
code.
That also removes the last (not counting legacy hotplug)
dependency of ACPI code on apic_id_limit and need to allocate
huge sparse PCMachineState.node_cpu array in case of 32-bit
APIC IDs.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For compatibility reasons PC/Q35 will start with legacy
CPU hotplug interface by default but with new CPU hotplug
AML code since 2.7 machine type. That way legacy firmware
that doesn't use QEMU generated ACPI tables will be
able to continue using legacy CPU hotplug interface.
While new machine type, with firmware supporting QEMU
provided ACPI tables, will generate new CPU hotplug AML,
which will switch to new CPU hotplug interface when
guest OS executes its _INI method on ACPI tables
loading.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add madt_cpu callback to AcpiDeviceIfClass and use
it for generating LAPIC MADT entries for CPUs.
Later it will be used for generating x2APIC
entries in case of more than 255 CPUs and also
would be reused by ARM target when ACPI CPU hotplug
is introduced there.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the ACPI table construction tools to create an ACPI entry
for IPMI. This adds a function called build_acpi_ipmi_devices
to add an DSDT entry for IPMI if IPMI is compiled in and an
IPMI device exists. It also adds a dummy function if IPMI
is not compiled in.
This conforms to section "C3-2 Locating IPMI System Interfaces in
ACPI Name Space" in the IPMI 2.0 specification.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove glib.h includes, as it is provided by osdep.h.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It should help to make clear that bios_linker works in terms
of offsets within a file. Also it should prevent mistakes
where user passes as arguments pointers to unrelated to file blobs.
While at it, considering that it's a ACPI checksum and
it's initial value must be 0, move checksum field zeroing
into bios_linker_loader_add_checksum() instead of doing it
at every call site manually before bios_linker_loader_add_checksum()
is called.
In addition add extra boundary checks.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
cleanup bios_linker_loader_add_pointer() API by switching
arguments to taking offsets relative to corresponding files
instead of doing pointer arithmetic on behalf of user which
were confusing.
Also make offset inside of source file explicit in API
so that user won't have to manually set it in
destination file blob and while at it add additional
boundary checks.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the time build_tpm_tcpa() is called the tcpalog size is
always 0, so log_area_start_address which is actually offset
from the start of ACPI_BUILD_TPMLOG_FILE is always 0.
Also as 'TCPA' is allocated 0 filled, there is no point
in calculating always 0 log_area_start_address and set
tcpa->log_area_start_address to it since the field should
always point to start of ACPI_BUILD_TPMLOG_FILE.
Make code easier to read dropping not needed offset
calculations.
While at that move tcpalog allocation closer to the code
that defines its size.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'table' argument in bios_linker_add_foo() commands is
a data blob of one of files also passed to the same API.
So instead of passing blob in every API call, add and keep
file name association with related blob at bios_linker_loader_alloc()
time.
And find blob by name looking up allocated file entries
inside of bios_linker_add_foo() commands.
It will:
- make API less confusing,
- enforce calling bios_linker_loader_alloc() before
calling any bios_linker_add_foo()
- make sure that blob is the correct one, i.e.
associated with the right file name
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Patch just changes type of of linker variables to
a structure, there aren't any functional changes.
Converting linker to a structure will allow to extend
it functionality in follow up patch adding sanity blob
checks.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In legacy cpu-hotplug ProcessorID == APIC ID is used
in MADT and cpu-hotplug AML. It was fine as both
are 8bit and unique. Spec depricated Processor()
with corresponding ProcessorID and advises to use
Device() and UID instead of it.
However UID is just 32bit and it can't fit ARM's
arch_id(MPIDR) which is 64bit. Also in case of
sparse arch_id() distribution, managment/lookup
of maps by arch_id(APIC ID/MPIDR) becomes complex
and expensive.
In preparation to common CPU hotplug with ARM
and to simplify lookup in possible_cpus[] map
switch ProcessorID to possible_cpus index in
MADT.
Legacy cpu-hotplug considerations:
HW interface of it is APIC ID based bitmask so
it's impossible to change, also CPON package in
AML also APIC ID based as well all the methods.
To avoid massive rewrite of AML keep is so and
just break assumption that ProcessorID == APIC ID,
ammending CPU_MAT_METHOD to accept APIC ID and
possible_cpus index, it needs them both to patch
MADT entry template. Also switch to possible_cpus
index Processor(ProcessorID) AML.
That way changes to MADT/AML are minimal and kept
inside AML/MADT not affecting external interfaces.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
since IO block used by CPU hotplug is fixed size and
initialized it the same file as build_legacy_cpu_hotplug_aml()
just use ACPI_GPE_PROC_LEN directly instead of passing
it around in several files.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
move the former SSDT part of CPU hoplug close to DSDT part.
AML is only moved but there isn't any functional change.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ACPI spec requires GPE handlers only for GPE events
that hardware implements.
So remove AML for not supported by QEMU device model
events.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Move acpi_build_srat_memory to common place so that it could be reused
by ARM. Rename it to build_srat_memory.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1461667229-9216-5-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ACPI spec says that Proximity Domain is an "Integer that represents
the proximity domain to which the processor belongs". So define it as a
uint32_t.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1461667229-9216-4-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1461667229-9216-3-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IRQ 5 used by TPM conflicts with PNP0C0F IRQs,
as result Windows fails driver initialization with reason
'device cannot find enough free resources'
But if TPM._CRS.IRQ entry is commented out, Windows
seems to initialize driver without errors as it doesn't
notice possible conflict and it seems to work
probably due to a link with IRQ 5 being unused/disabled.
So temporary comment out TPM._CRS.IRQ to 'fix'
regression in TPM, with intent to fix it correctly
later i.e.:
1. pick unused IRQ as default one for TPM
2. fetch IRQ value from device model so that user
could override default one if it conflicts with
some other device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Windows will fail initialize TMP driver with the reason:
'device cannot find enough free resources'
That happens because parent BUS doesn't describe
MMIO resources used by TPM child device.
Fix it by describing it in top-most parent bus scope PCI0.
It was 'regressed' by commit
5cb18b3d TPM2 ACPI table support
with following fixup
9e472263 acpi: add missing ssdt
which did the right thing by moving TPM to BUS
it belongs to but lacked a proper resource declaration.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the ACPI spec, each UID must be unique.
Use the irq number as UID for GSI links.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
cpu->found_cpus bitmap is used for setting present
flag in CPON AML package. But it takes a bunch of code
to fill bitmap and could be simplified by getting
presense info from possible CPUs list directly.
So drop cpu->found_cpus bitmap and unroll possible
CPUs list into APIC index array at the place where
CPUON AML package is created.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
do not assume that all lapics in range 0..apic_id_limit
are valid and do not create Processor and Notify objects
for not possible lapics.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
do not assume that all lapics in range 0..apic_id_limit
are valid and do not create lapic entries for not
possible lapics in MADT.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
When APIC IDs are sparse*, in addition to valid LAPIC
entries the SRAT is also filled invalid ones for non
possible APIC IDs.
Fix it by asking machine for all possible APIC IDs
instead of wrongly assuming that all APIC IDs in
range 0..apic_id_limit are possible.
* sparse lapic topology CLI:
-smp x,sockets=2,cores=3,maxcpus=6
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
cache qdev_get_machine() result in acpi_setup/acpi_build_update
time and pass it as an argument to child functions that need it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
32 bits IO port starting from 0x0a18 in guest is reserved for NVDIMM
ACPI emulation. The table, NVDIMM_DSM_MEM_FILE, will be patched into
NVDIMM ACPI binary code
OSPM uses this port to tell QEMU the final address of the DSM memory
and notify QEMU to emulate the DSM method
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Legacy Windows operating systems like Windows XP and Windows 2003
require _DIS method to be present for all interrupt links.
PC machines already have a no-op implemented for GSI links, add
it also in Q35.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
On x86-based systems Linux determines the presence and the type of
floppy drives via a query of a CMOS field. So does SeaBIOS when
populating the return data for int 0x13 function 0x08.
However Windows doesn't do it. Instead, it requests this information
from BIOS via int 0x13/0x08 or through ACPI objects _FDE (Floppy Drive
Enumerate) and _FDI (Floppy Drive Information) of the floppy controller
object. On UEFI systems only ACPI-based detection is supported.
QEMU doesn't provide those objects in its ACPI tables and as a result
floppy drives are invisible to Windows on UEFI/OVMF.
This patch adds those objects to the floppy controller in DSDT,
populating them with the information from respective QEMU objects.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Kevin O'Connor <kevin@koconnor.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of statically declaring the floppy controller in DSDT, with its
_STA method depending on some obscure bit in the parent ISA bridge, add
the object dynamically to DSDT via AML API only when the controller is
present.
The _STA method is no longer necessary and is therefore dropped. So are
the declarations of the fields indicating whether the contoller is
enabled.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Kevin O'Connor <kevin@koconnor.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extend aml_operation_region() to use object as offset
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a fw_cfg device node to the ACPI DSDT. While the guest-side
firmware can't utilize this information (since it has to access
the hard-coded fw_cfg device to extract ACPI tables to begin with),
having fw_cfg listed in ACPI will help the guest kernel keep a more
accurate inventory of in-use IO port regions.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marc Marí <markmb@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1455906029-25565-4-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While guest/host ABI is documented in hw/acpi/bios-linker-loader.c,
the API was left undocumented.
This adds documentation for all API functions.
Additionally, input is validated to make sure all
pointers fall within range of provided files.
To allow this validation for checksum commands,
bios_linker_loader_add_checksum is changed to accept GArray * in place
of void *.
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Microsoft spec about the SLIC and MSDM ACPI tables at
<http://go.microsoft.com/fwlink/p/?LinkId=234834> requires the OEM ID and
OEM Table ID fields to be consistent between the SLIC and the RSDT/XSDT.
That further affects the FADT, because a similar match between the FADT
and the RSDT/XSDT is required by the ACPI spec in general.
This patch wires up the previous three patches.
Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86)
Cc: Richard W.M. Jones <rjones@redhat.com>
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Steven Newbury <steve@snewbury.org.uk>
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758
LP: https://bugs.launchpad.net/qemu/+bug/1533848
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Steven Newbury <steve@snewbury.org.uk>
Since build_rsdt() is implemented as common utility code (in
"hw/acpi/aml-build.c"), it should expose -- and forward -- the oem_id and
oem_table_id parameters between board code and the generic build_header()
function.
Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Shannon Zhao <zhaoshenglong@huawei.com> (maintainer:ARM ACPI Subsystem)
Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86)
Cc: Richard W.M. Jones <rjones@redhat.com>
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Steven Newbury <steve@snewbury.org.uk>
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758
LP: https://bugs.launchpad.net/qemu/+bug/1533848
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
This patch is the continuation of commit 8870ca0e94 ("acpi: support
specified oem table id for build_header"). It will allow us to control the
OEM ID field too in the SDT header.
Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> (maintainer:NVDIMM)
Cc: Shannon Zhao <zhaoshenglong@huawei.com> (maintainer:ARM ACPI Subsystem)
Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86)
Cc: Richard W.M. Jones <rjones@redhat.com>
Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Steven Newbury <steve@snewbury.org.uk>
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1248758
LP: https://bugs.launchpad.net/qemu/+bug/1533848
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
The ACPI code can use the PCMachineState fields directly.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Remove the fields: legacy_acpi_table_size, has_acpi_build,
has_reserved_memory, and rsdp_in_ram from PcGuestInfo, and let
the existing code use the PCMachineClass fields directly.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
We don't need to save the pointer on AcpiBuildState, as it is not
used anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
We can use PC_MACHINE(qdev_get_machine())->acpi_guest_info to get
guest_info.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since both tables are built dynamically now,
there is no point in keeping ASL in them in separate
tables.
So do the same as we do for ARM where we have only
DSDT table, i.e. move SSDT ASL into DSDT and
drop SSDT altogether.
This patch doesn't change moved SSDT ASL in any way,
but it opens a way to relatively independently simplify
generated ASL on per device/subsystem basis in
followup series.
It also simplifies bios-tables-test where expected
SSDT blobs could be dropped and only DSDT ones
have to be maintained.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
leave Scope(\_SB) definition in DSDT so that iasl
would be able to compile DSDT since we are still
need definition block for table.
After Q35 ASL is converted, DSDT templates will
be completly replaced by AML API generated tables.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI routing table for expander buses is build with help
of build_prt() using AML API. And it's almost the same
as PRT for PCI0 bus except of power-management device.
So make existing build_prt() build PRT table for PCI0
bus as well.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
and also move PRQx fields declaration as it can't be
split out into separate patch since fields use
PCI0.ISA.P40C operation region and OperationRegion
must be declared in the same table as a Field that
uses it. If this condition is not statisfied Windows
will BSOD ans IASL (make check) will error out as well.
For the same reason pm is moved together with isa-bridge
as the later refernces P13C OperationRegion from pm device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
most of MEMORY_foo defines are not shared
with ASL anymore and are used only inside of
memory_hotplug_acpi_table.c, so move them
there and make them strings. As result we
can replace stringify(MEMORY_foo) with just
MEMORY_foo, which makes code a bit cleaner.
No AML change introduced by this patch.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
in addition remove no longer needed acpi-dsdt-mem-hotplug.dsl.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
before consolidating memhp code in memory_hotplug_acpi_table.c
and for simplifying review, first factor out memhp code into
new function build_memory_devices() in i386/acpi-build.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
----
PS:
no functional change, only code movement.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ACPI specification (minimally versions 1.0b through 6.0) define the
FADT.CENTURY field as:
The RTC CMOS RAM index to the century of data value (hundred and
thousand year decimals). If this field contains a zero, then the RTC
centenary feature is not supported. If this field has a non-zero value,
then this field contains an index into RTC RAM space that OSPM can use
to program the centenary field.
The x86 targets generate ACPI payload, emulate an RTC
(CONFIG_MC146818RTC), and that RTC supports the "centenary feature" (see
occurrences of RTC_CENTURY in cmos_ioport_write() and cmos_ioport_read()
in "hw/timer/mc146818rtc.c".)
However, FADT.CENTURY is left at zero currently:
[06Ch 0108 1] RTC Century Index : 00
which -- according to analysis done by Ruiyu Ni at Intel -- should cause
Linux and Windows 8+ to think the RTC centenary feature is unavailable,
and cause Windows 7 to (incorrectly) assume that the offset to use is
constant 0x32. (0x32 happens to be the right value on QEMU, but Windows 7
is wrong to assume anything at all).
Exposing the right nonzero offset in FADT.CENTURY informs Linux and
Windows 8+ about the right capabilities of the hardware, plus it retrofits
our FADT to Windows 7's behavior.
Regression tested with the following guests (all UEFI installs):
- i386 Q35: Fedora 21 ("Fedlet" edition)
- x86_64:
- i440fx:
- Fedora 21
- RHEL 6 and 7
- Windows 7 and 10
- Windows Server 2008 R2 and 2012 R2
- Q35:
- Fedora 22
- Windows 8.1
Cc: "Michael S. Tsirkin" <mst@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Igor Mammedov <imammedo@redhat.com> (supporter:ACPI/SMBIOS)
Cc: Paolo Bonzini <pbonzini@redhat.com> (maintainer:X86)
Cc: Richard Henderson <rth@twiddle.net> (maintainer:X86)
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
it allows to express ShiftRight(A,B,C) syntax
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
it allows to express following ASL expression:
Add(arg1, arg2, result)
usecases that do not need to store result
should pass NULL as 3rd arg that would express
Add(arg1, arg2,)
construct.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
NFIT is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)
Currently, we only support PMEM mode. Each device has 3 structures:
- SPA structure, defines the PMEM region info
- MEM DEV structure, it has the @handle which is used to associate specified
ACPI NVDIMM device we will introduce in later patch.
Also we can happily ignored the memory device's interleave, the real
nvdimm hardware access is hidden behind host
- DCR structure, it defines vendor ID used to associate specified vendor
nvdimm driver. Since we only implement PMEM mode this time, Command
window and Data window are not needed
The NVDIMM functionality is controlled by the parameter, 'nvdimm', which
is introduced for the machine, there is a example to enable it:
-machine pc,nvdimm -m 8G,maxmem=100G,slots=100 -object \
memory-backend-file,id=mem1,share,mem-path=/tmp/nvdimm1,size=10G -device \
nvdimm,memdev=mem1,id=nv1
It is disabled on default
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let build_header() support specified OEM table id so that we can build
multiple SSDT later
If the oem table id is not specified (aka, NULL), we use the default id
instead as the previous behavior
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add bus property to PC machines and use it when looking
for primary PCI root bus (bus 0).
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
A generic PCI Bus Expander doesn't necessary have a built-in PCI bridge.
Int this case the ACPI will include IO/MEM ranges per device. Try to merge
adjacent resources to reduce the ACPI tables length.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add serialized method support so that explicit Mutex can be
avoided
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1449804086-3464-2-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Read callbacks are now only invoked at item selection, before any
data is read. As such, the value of the offset argument passed to
the callback will always be 0. Also, the two callback instances
currently in use both leave their offset argument unused.
This patch removes the offset argument from the fw_cfg read callback
prototype, and from the currently available instances. The unused
(write) callback prototype is also removed (write support was removed
earlier, in commit 023e3148).
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Marc Marí <markmb@redhat.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1446733972-1602-4-git-send-email-somlo@cmu.edu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When building QEMU with Mingw64 toolchain I see a warning
CC x86_64-softmmu/hw/i386/acpi-build.o
hw/i386/acpi-build.c: In function 'acpi_build':
hw/i386/acpi-build.c:1138:9: warning: 'pm.cpu_hp_io_base' may be used uninitialized in this function [-Wmaybe-uninitialized]
aml_append(crs,
^
hw/i386/acpi-build.c:1666:16: note: 'pm.cpu_hp_io_base' was declared here
AcpiPmInfo pm;
^
In acpi_get_pm_info() some of the fields are pre-initialized
to 0, but this one was missed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Commit 2332333c added a _STA method that hides the device. The fact
that the device is not shown in the gui make it harder to install its
Windows' device.
https://bugzilla.redhat.com/show_bug.cgi?id=1238141
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Move hotplug_memory_base and hotplug_memory fields of PCMachineState
into a separate structure so that the same can be made use of from
other architectures supporing memory hotplug.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
remove some code duplication in acpi-build.c and drop 5
ASL and binary blobs files with TPM ACPI device description,
replacing them with 1 small hunk written in AML API.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Most notably this includes virtio 1 patches
Still not all devices converted, and not fully spec compliant,
so disabled by default.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVeXakAAoJECgfDbjSjVRpyFAH/AwSJhBbQOxtqS66INnzoLRJ
MWD3cP8tj0PzXsLx0cuPxdTboHH60alhSp+iLGv4NgNw15okY71bY2eLhewxS66W
a0wzVCaqeeD5GAoQaSOlqNLrhBodsKS62BWD9y0kK9rtMJfCW2C1JP8Mpue1XMuE
UC72tF4Q6wVdBD/kTD9DZW/23roFu0SuieFSjbQNNi1lInXtDv79UGX0xUHaXlal
+qCtRIy/wNZF0z5arNV/Skq7LKqYl7KZtTapZByy+q6vu0L8mOeXgJ9DLh666htB
NQJJ+VhsgBKPHmZqf8h4mPlvyp03rkr5dIGk7iB2o44GPaEJ/RjZ4wULjxWD12s=
=UY/0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, acpi, virtio
Most notably this includes virtio 1 patches
Still not all devices converted, and not fully spec compliant,
so disabled by default.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu Jun 11 12:53:08 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (42 commits)
i386/acpi-build: fix PXB workarounds for unsupported BIOSes
i386/acpi-build: more traditional _UID and _HID for PXB root buses
vhost-scsi: move qdev properties into vhost-scsi.c
virtio-9p-device: move qdev properties into virtio-9p-device.c
virtio-serial-bus: move qdev properties into virtio-serial-bus.c
virtio-rng: move qdev properties into virtio-rng.c
virtio-scsi: move qdev properties into virtio-scsi.c
virtio-net.h: Remove unsed DEFINE_VIRTIO_NET_PROPERTIES
virtio-net: move qdev properties into virtio-net.c
virtio-input: emulated devices [pci]
virtio-input: core code & base class [pci]
pci: add PCI_CLASS_INPUT_*
virtio-pci: fill VirtIOPCIRegions early.
virtio-pci: drop identical virtio_pci_cap
virtio-pci: move cap type to VirtIOPCIRegion
virtio-pci: move virtio_pci_add_mem_cap call to virtio_pci_modern_region_map
virtio-pci: add virtio_pci_modern_region_map()
virtio-pci: add virtio_pci_modern_regions_init()
virtio-pci: add struct VirtIOPCIRegion for virtio-1 regions
virtio-balloon: switch to virtio_add_feature
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The patch
apci: fix PXB behaviour if used with unsupported BIOS
uses the following condition to see if a "PXB mem/IO chunk" has *not* been
configured by the BIOS:
(!range_base || range_base > range_limit)
When this condition evaluates to true, said patch *omits* the
corresponding entry from the _CRS.
Later on the patch checks for the opposite condition (with the intent of
*adding* entries to the _CRS if the "PXB mem/IO chunks" *have* been
configured). Unfortunately, the condition was negated incorrectly: only
the first ! operator was removed, which led to the nonsensical expression
(range_base || range_base > range_limit)
leading to bogus entries in the _CRS, and causing BSOD in Windows Server
2012 R2 when it runs on OVMF.
The correct negative of the condition seen at the top is
(range_base && range_base <= range_limit)
Fix the expressions.
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ACPI specification permits the _HID and _UID objects to evaluate to
strings. (See "6.1.5 _HID (Hardware ID)" and "6.1.12 _UID (Unique ID)" in
the ACPI v6.0 spec.)
With regard to related standards, the UEFI specification can also express
a device address composed from string _HID and _UID identifiers, inside
the Expanded ACPI Device Path Node. (See "9.3.3 ACPI Device Path", Table
49, in the UEFI v2.5 spec.)
However, numeric (integer) contents for both _HID and _UID are more
traditional. They are recommended by the UEFI spec for size reasons:
[...] the ACPI Device Path node is smaller and should be used if
possible to reduce the size of device paths that may potentially be
stored in nonvolatile storage [...]
External tools support them better (for example the --acpi_hid and
--acpi_uid options of "efibootmgr" only take numeric identifiers).
Finally, numeric _HID and _UID contents are existing practice in the QEMU
source.
This patch was tested with a Fedora 20 LiveCD and a preexistent Windows
Server 2012 R2 guest. Using "acpidump" and "iasl" in the Fedora guest, we
get, in the SSDT:
> Scope (\_SB)
> {
> Device (PC04)
> {
> Name (_UID, 0x04) // _UID: Unique ID
> Name (_HID, EisaId ("PNP0A03") /* PCI Bus */) // _HID: Hardware ID
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This includes pxb support by Marcel, as well as multiple enhancements all over
the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVcC2WAAoJECgfDbjSjVRpwgcH/3mvFP3UmvmXyzf8mYtQ/1fR
ikvdTGHl2DR7TMQszNeCJn/p6NgH3oXRbXh39xM1xl9D2/dsZH9o1cUyFE04K9LK
am0cTmlty1OEyFN8BX1TtpngUxa5mpRA/+NYuWbh1FoTp6RoEPM6P+L1zLqtXYn1
REF++ehrsQI2Az2pibf4nul8bwuTWJLJeMS6TcCVCRGoaHsCESiVMu2sQrzEbWEW
E8ZWaXaiycLxLkW0/oU8BmZyrAk1PHdHwgbMUINV0kV5E2u+ZU+3KY79ezC2FyHW
NV7G9Rhh/5H828/cB6UP4CPZ4AYIYmg02iz5XBGKbd8WS9oPrJVK7EoqfU3oZfc=
=5AmP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, acpi, virtio, tpm
This includes pxb support by Marcel, as well as multiple enhancements all over
the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu Jun 4 11:51:02 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
vhost: logs sharing
hw/acpi: piix4_pm_init(): take fw_cfg object no more
hw/acpi: move "etc/system-states" fw_cfg file from PIIX4 to core
hw/acpi: acpi_pm1_cnt_init(): take "disable_s3" and "disable_s4"
pc-dimm: don't assert if pc-dimm alignment != hotpluggable mem range size
docs: Add PXB documentation
apci: fix PXB behaviour if used with unsupported BIOS
hw/pxb: add numa_node parameter
hw/pci: add support for NUMA nodes
hw/pxb: add map_irq func
hw/pci: inform bios if the system has extra pci root buses
hw/pci: introduce PCI Expander Bridge (PXB)
hw/pci: removed 'rootbus nr is 0' assumption from qmp_pci_query
hw/acpi: remove from root bus 0 the crs resources used by other buses.
hw/acpi: add _CRS method for extra root busses
hw/apci: add _PRT method for extra PCI root busses
hw/acpi: add support for i440fx 'snooping' root busses
hw/pci: extend PCI config access to support devices behind PXB
hw/i386: query only for q35/pc when looking for pci host bridge
hw/pci: made pci_bus_num a PCIBusClass method
...
Conflicts:
hw/i386/pc_piix.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PXB does not work with unsupported bioses, but should
not interfere with normal OS operation.
We don't ship them anymore, but it's reasonable
to keep the work-around until we update the bios in qemu.
Fix this by not adding PXB mem/IO chunks to _CRS
if they weren't configured by BIOS.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The pxb can be attach to and existing numa node by specifying
numa_node option that equals the desired numa nodeid.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
If multiple root buses are used, root bus 0 cannot use all the
pci holes ranges. Remove the IO/mem ranges used by the other
primary buses.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Save the IO/mem/bus numbers ranges assigned to the extra root busses
to be removed from the root bus 0 range.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
If the machine has extra root busses that are snooping to
the i440fx host bridge, we need to add them to
acpi in order to be properly detected by guests.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Because of the PXB hosts we cannot simply query TYPE_PCI_HOST_BRIDGE anymore.
On i386 arch we only have two pci hosts, so we can look only for them.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
valgrind complains about:
==16447== 48 bytes in 2 blocks are definitely lost in loss record 2,033 of 3,310
==16447== at 0x4C2845D: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==16447== by 0x2E4FD7: malloc_and_trace (vl.c:2546)
==16447== by 0x64C770E: g_malloc (in /usr/lib64/libglib-2.0.so.0.3600.3)
==16447== by 0x53EC3F: qint_from_int (qint.c:33)
==16447== by 0x53B426: qmp_output_type_int (qmp-output-visitor.c:162)
==16447== by 0x539257: visit_type_uint32 (qapi-visit-core.c:147)
==16447== by 0x471D07: property_get_uint32_ptr (object.c:1651)
==16447== by 0x47000C: object_property_get (object.c:822)
==16447== by 0x472428: object_property_get_qobject (qom-qobject.c:37)
==16447== by 0x25701A: build_append_pci_bus_devices (acpi-build.c:520)
==16447== by 0x25902E: build_ssdt (acpi-build.c:1004)
==16447== by 0x25A0A8: acpi_build (acpi-build.c:1420)
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add a TPM2 ACPI table if a TPM 2 is used in the backend.
Also add an SSDT for the TPM 2.
Rename tpm_find() to tpm_get_version() and have this function
return the version of the TPM found, TPMVersion_Unspec if
no TPM is found. Use the version number to build version
specific ACPI tables.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the old times, we always had pvpanic in ACPI and a _STA method told
the guest not to use it. Automatic generation dropped the _STA method
as the specification says that missing _STA means enabled and working.
Some guests (Linux) had buggy drivers and this change made them unable
to utilize pvpanic.
A Linux patch is posted as well, but I think it's worth to make pvpanic
useable on old guests at the price of three lines and few bytes of SSDT.
The old _STA method was
Method (_STA, 0, NotSerialized) {
Store (PEST, Local0)
If (LEqual (Local0, Zero)) {
Return (Zero) }
Else {
Return (0x0F) }}
Igor pointed out that we don't need to use a method to return a constant
and that 0xB (don't show in UI) is the common definition now.
Also, the device used to be PEVT. (PEVT as in "panic event"?)
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
RSDT points to other tables FADT, MADT, GTDT. This code is shared with x86.
Here we still use RSDT as UEFI puts ACPI tables below 4G address space,
and UEFI ignore the RSDT or XSDT.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-12-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVUFj/AAoJECgfDbjSjVRpteQH+gKoOMKilM6qvgdQS9vduFJ+
lDHNnmfgzWjVMEetiUOc9hImfEEyTyDFrkSI3wf4a8RZ7UnnDKD8hZR1nToySJPd
SuDP/EdtXYtInIMjc1MUUrJEP6qtjjgM+IbikVzHDxCeekrTMFz2w05MZ+V+hxI5
8b8ndPNfjX3ciIRjHKZ2u6hKEemhzxr1yyKTnJVGDN07hmfMbCyLsiWnFfShZwfv
g7USgiXjFfpvU5Q7QWpiCapfAaEpevRqieGzRjSbPy5Frm3XT7v+hWbFnvIJqUPj
5/SMV8I4qtKQe15Qah292HB//oaFM/AvRtHWvQkre3YIqFwyCYimQtjqoRCYC1E=
=x0ub
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, virtio enhancements
Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon May 11 08:23:43 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
acpi: update expected files for memory unplug
virtio-scsi: Move DEFINE_VIRTIO_SCSI_FEATURES to virtio-scsi
virtio-net: Move DEFINE_VIRTIO_NET_FEATURES to virtio-net
pci: Merge pci_nic_init() into pci_nic_init_nofail()
acpi: add a missing backslash to the \_SB scope.
qmp-event: add event notification for memory hot unplug error
acpi: add hardware implementation for memory hot unplug
acpi: fix "Memory device control fields" register
acpi: extend aml_field() to support UpdateRule
acpi, mem-hotplug: add unplug cb for memory device
acpi, mem-hotplug: add unplug request cb for memory device
acpi, mem-hotplug: add acpi_memory_slot_status() to get MemStatus
docs: update documentation for memory hot unplug
virtio: coding style tweak
pci: remove hard-coded bar size in msix_init_exclusive_bar()
virtio-pci: speedup MSI-X masking and unmasking
virtio: introduce vector to virtqueues mapping
virtio-ccw: using VIRTIO_NO_VECTOR instead of 0 for invalid virtqueue
monitor: check return value of qemu_find_net_clients_except()
monitor: replace the magic number 255 with MAX_QUEUE_NUM
...
Conflicts:
hw/s390x/s390-virtio-bus.c
[PMM: fixed conflict in s390_virtio_scsi_properties and
s390_virtio_net_properties arrays; since the result of the
two conflicting patches is to empty the property arrays
completely, the conflict resolution is to remove them entirely.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A predefined scope in the ACPI specs is precede with a backslash.
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
- implements QEMU hardware part of memory hot unplug protocol
described at "docs/spec/acpi_mem_hotplug.txt"
- handles memory remove notification event
- handles device eject notification
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
0 bit in Memory device control fields must be cleared before writing to
register. But now this field isn't cleared when other fields are written.
To solve this bug, This patch fixes UpdateRule to WriteAsZeros in "Memory
device control fields" register.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The flags field is declared with default update rule 'Preserve',
this patch extends aml_field() to support UpdateRule so that we
can specify different values per field.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move generic acpi building helpers into dedictated file and this
can be shared with other machines.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ACPI related header file acpi-defs.h, includes definitions that
apply on other architectures as well. Move it in `include/hw/acpi/`
to sanely include it from other architectures.
Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ram_addr_t is an internal interface, everyone should go through
MemoryRegion. Clean it up by making rom_add_blob return a
MemoryRegion* and using the new qemu_ram_resize infrastructure.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit cd61cb2 pc: acpi-build: generate pvpanic device description dynamically
introduced regression changing pvpanic device HID from
QEMU0001 to QEMU0002.
Fix AML generated code so that pvpanic device
would keep its original HID. i.e. QEMU0001
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: Gal Hammer <ghammer@redhat.com>
Message-Id: <1427717907-25027-1-git-send-email-imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent changes left acpi_get_hex unused,
and clag is unhappy about it:
error: unused function 'acpi_get_hex'
Drop it, as well as some unused macros.
Signer-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace AML template patching with direct composing
of PCI device entries in C. It allows to simplify
PCI tree generation further and saves us about 400LOC
scattered through different files, confining tree
generation to one C function which is much easier
to deal with.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it basicaly does the same as original approach,
* just without bus/notify tables tracking (less obscure)
which is easier to follow.
* drops unnecessary loops and bitmaps,
creating devices and notification method in the same loop.
* saves us ~100LOC
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
patch moves SMC device into SSDT and creates it only
when device is present, which makes ACPI tables smaller
in default case when device is not present.
Also it fixes wrong IO range in CRS if "iobase"
property is set to a non default value.
PS:
Testing with XP shows that current default "iobase"
used SMC device conflicts with floppy controller IO,
but it's topic for another patch and I'd leave it
to SMC device author for resolving conflict.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
CC: agraf@suse.de
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IO port and length will be used in following patch
to correctly generate SMC ACPI device in SSDT.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It drops empty ssdt_misc templete. It also hides
from user almost all pointer arithmetic when building
SSDT which makes resulting code a bit cleaner
and concentrating only on composing ASL construct
/i.e. a task build_ssdt() should be doing/.
Also it makes one binary blob less stored in QEMU
source tree by removing need to keep and update
hw/i386/ssdt-misc.hex.generated file here in total
saving us ~430LOC.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drops manual hole punching in PCI0._CRS on PIIX4 machine type
for GPE0 resources. Resources will be consumed by Device(GPE0)
that is attached to PCI namespace.
There is GPE device with HID ACPI0006 since ACPI2.0
that should be used for this purpose but none of Windows
versions support it and show it as "unknown device",
so reserve resource in old fashioned way with PNP0A06
device to make windows happy and actually reserve resources.
Along with last hole _CRS layout of PIIX4 machine becomes
the same as Q35 one, so merge them together and use the same
_CRS for both machine types.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drops manual hole punching in PCI0._CRS on PIIX4 machine type
for CPU hotplug resources.
Resources will be consumed by Device(PRES) that is attached
to PCI bus. The same way how it currently works for mem hotlpug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drops manual hole punching in PCI0._CRS for PIIX4 machine type.
Resources will be consumed by Device(PHPR) that cwis attached
to PCI bus. The same way how it currently works for mem hotlpug.
Manual hole in PIIX4 _CRS wasn't correct anyway since it was
legacy size 0xF while current PCIHP MMIO region is of size 0x14.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace template patching and runtime calculation
in _CRS() method with static _CRS defined in SSDT.
No functional change except of as mentined above
and _CRS being moved from DSDT to SSDT.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces a static complied in DSDT MMIO region
for memory hotplug with one created at runtime
leaving only truly static memory hotplug related
ASL bits in DSDT. And replaces template patching
of MEMORY_SLOTS_NUMBER value with ASL API created
named value.
Later it also would make easier to reuse current
ACPI memory hotplug on other targets.
Also later it would be possible to move remaining
memory hotplug ASL methods into build_ssdt() and
add all memory hotplug related AML into SSDT only
when memory hotplug is enabled, further reducing
ACPI tables blob if memory hotplug isn't used.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
in addition it saves us ~330LOC and makes it one binary blob less
stored in QEMU source tree by removing need to keep and update
hw/i386/ssdt-mem.hex.generated file there.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces a static complied in DSDT MMIO region
for CPU hotplug with one created at runtime
leaving only truly static CPU hotplug related ASL
bits in DSDT.
It also puts CPU_HOTPLUG_RESOURCE_DEVICE into
PCI0 scope and reserves resources from it,
preparing for dropping manual hole punching
in PCI0._CRS.
Later it also would make easier to reuse current
ACPI CPU hotplug on other targets.
Also later it would be possible to move remaining
CPU hotplug ASL methods into build_ssdt() and
add all CPU hotplug related AML into SSDT only
when CPU hotplug is enabled, further reducing
ACPI tables blob if CPU hotplug isn't used.
impl. detail:
Windows XP can't handle /BSODs/ OperationRegion
declaration in DSDT when variable from SSDT is used
for specifying its address/length and also when
Field declared in DSDT with OperationRegion from
SSDT if DSDT is being parsed before SSDT.
But it works just fine when referencing named
fields from another table. Hence OperationRegion
and Field declaration are moved to SSDT to make
XP based editions work.
PS:
Later Windows editions seem to be fine with above
conditions.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
in addition it saves us ~400LOC and makes it
one binary blob less stored in QEMU source
tree by removing need to keep and update
hw/i386/ssdt-proc.hex.generated file there.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drops AML template patching and allows to
save some space in SSDT if pvpanic device doesn't
exist by not including disabled device description
into SSDT. It also makes device description
smaller by replacing _STA method with named value
and dropping _INI method.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replaces template patching with packages composed
using AML API.
Note on behavior change:
If S3 or S4 is disabled, respective packages won't
be created and put into SSDT. Which saves us some
space in SSDT and doesn't confuse guest OS with
mangled package names as it was done originally.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* factor out ACPI const int packing out of build_append_value()
and rename build_append_value() to build_append_int_noprefix()
it will be reused for adding a plain integer value into AML.
will be used by is aml_processor() and CRS macro helpers
* extend build_append_int{_noprefix}() to support 64-bit values
it will be used PCI for generating 64bit _CRS entries
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
prepares for incremental conversion of SSDT content to AML API
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
except of shortening of lines and making code a bit more readable,
it will reduce renaming noise when changing tables blob from GArray* to
Aml* type.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hotplugged bridges don't get bsel allocated so acpi hotplug doesn't work
for them anyway. OTOH adding them in ACPI creates a host of problems,
e.g. they can't be hot-unplugged themselves which is surprising to
users.
So let's just skip these.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For legacy machine types, rsdp is not in RAM, so we need a copy of rsdp
for fw cfg. We previously used g_array_free with false parameter,
but this seems to confuse people.
This also wastes a bit of memory as the buffer is unused for new
machine types.
Let's just use plain g_memdup, and free original memory together with
the array.
TODO: rationalize tcpalog memory management, and get rid of the mfre
parameter.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
As comment in acpi-build.c notes, RSDP is not really immutable. So it's
really a question of whether it's in RAM, name the variable accordingly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This fixes multiple issues around ACPI RAM management:
RSDP and linker RAM aren't currently marked dirty
on update, so they won't be migrated correctly.
Let's handle all tables in the same way: set correct size (assert if
too big), update, mark RAM dirty.
This also drops assert checking that table size didn't change: table
size is fundamentally dynamic and depends on hw configuration,
just set the correct size and use that (memory core asserts if size is
too large).
This also means we can drop tracking table size, memory core does this
for us now.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Makes sure that RSDP stays the same
/i.e. matches ACPI tables blob in source/
if guest is migrated during RSDP reading or
has been already shadowed by firmware.
Fix applies only to new machine types starting
from 2.3, so it won't break migration for old
machine types.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Linker table is build only once, so if later during
tables rebuild sizes of other ACPI tables change
pointers will be patched incorrectly due to wrong
offsets in linker. Resulting in guest not being able
to find ACPI tables.
Fix it by updating 'linker' table with the rest of
tables when firmware reads it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
RSDT offset can change across reboots and that makes
immutable RSDP, which is build at startup, point to
incorrect place in ACPI table blob. That results in
BIOS corrupting tables and guest OS failing to find
ACPI tables.
We really should have put it in a ROM region, but
we can't change that for old machine types,
let's just set the callback and update it explicitly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use build_append_namestring() instead of build_append_nameseg()
So user won't have to care whether name is NameSeg, NamePath or
NameString.
See for reference ACPI 5.0: 20.2.2 Name Objects Encoding
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
the will be later used for composing AML primitives
and all that could be reused later for ARM machines
as well.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When bridge hotplug is disabled for old machine types,
we never free memory allocated for temporary tables.
Fix this up.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to ACPI spec NameSeg shorter than 4 characters
must be padded up to 4 characters with "_" symbol.
ACPI 5.0: 20.2.2 "Name Objects Encoding"
Do it in build_append_nameseg() so that caller shouldn't know
or care about it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use resizeable ram API so we can painlessly extend ROMs in the
future. Note: migration is not affected, as we are
not actually changing the used length for RAM, which
is the part that's migrated.
Use this in acpi: reserve x16 more RAM space.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
If QEMU is started with -numa ... Windows only notices that
CPU has been hot-added but it will not online such CPUs.
It's caused by the fact that possible CPUs are flagged as
not enabled in SRAT and Windows honoring that information
doesn't use corresponding CPU.
ACPI 5.0 Spec regarding to flag says:
"
Table 5-47 Local APIC Flags
...
Enabled: if zero, this processor is unusable, and the operating system
support will not attempt to use it.
"
Fix QEMU to adhere to spec and mark possible CPUs as enabled
in SRAT.
With that Windows onlines hot-added CPUs as expected.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
