Commit Graph

98 Commits

Author SHA1 Message Date
Gerd Hoffmann
60e94e4397 qxl: store channel id in qxl->id
See qemu_spice_add_display_interface(), the console index is also used
as channel id.  So put that into the qxl->id field too.

In typical use cases (one primary qxl-vga device, optionally one or more
secondary qxl devices, no non-qxl display devices) this doesn't change
anything.

With this in place the qxl->id can not be used any more to figure
whenever a given device is primary (with vga compat mode) or secondary.
So add a bool to track this.

Cc: spice-devel@lists.freedesktop.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181012114540.27829-1-kraxel@redhat.com
2018-10-29 10:43:19 +01:00
Gerd Hoffmann
2f99f80c5d qxl: check qxl_phys2virt return value
Fixes: CID 1395986
Fixes: 979f7ef896
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181005134608.1251-1-kraxel@redhat.com
2018-10-15 09:57:33 +02:00
Peter Maydell
5a358b39f5 hw/display/qxl: Suppress clang-7 warning about misaligned atomic operation
If QEMU is compiled with clang-7 it results in the warning:

hw/display/qxl.c:1884:19: error: misaligned or large atomic operation
may incur significant performance penalty [-Werror,-Watomic-alignment]
    old_pending = atomic_fetch_or(&d->ram->int_pending, le_events);
                  ^

This is because the Spice headers forgot to define the QXLRam struct
with the '__aligned__(4)' attribute.  clang 7 and newer will thus
warn that the access here to int_pending might not be 4-aligned
(because the QXLRam object d->ram points at might start at a
misaligned address).  In fact we set up d->ram in init_qxl_ram() so
it always starts at a 4K boundary, so we know the atomic access here
is OK.

Newer Spice versions (with Spice commit
beda5ec7a6848be20c0cac2a9a8ef2a41e8069c1) will fix the bug;
for older Spice versions, work around it by telling the compiler
explicitly that the alignment is OK using __builtin_assume_aligned().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180927155538.699-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-05 11:21:17 +02:00
Gerd Hoffmann
979f7ef896 qxl: use guest_monitor_config for local renderer.
When processing monitor config from guest store head0 width and height
for single-head configurations.  Use these when creating the
DisplaySurface in the local renderer.

This fixes a rendering issue with wayland.  Wayland rounds up the
framebuffer width and height to a multiple of 64, so with odd
resolutions (800x600 for example) the framebuffer is larger than the
actual screen.  The monitor config has the actual screen size though.

This fixes guest display for anything using the local renderer
(non-spice UI, screendump monitor command).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180919103057.9666-1-kraxel@redhat.com
2018-09-27 08:08:07 +02:00
Gerd Hoffmann
408e2f37be qxl: drop unused generation variable
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180810132236.25908-1-kraxel@redhat.com
2018-08-21 09:51:40 +02:00
Peter Maydell
79c2b203a9 vga: disable global_vmstate, virtio-gpu scanout tracking fixes.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJbO0WYAAoJEEy22O7T6HE4omoP/R0aKyojHVxWeL4OK5JxfTJP
 VfEu1JCYhyXhn5KQpnSTyuklr2PuM6Wq89fBx2Rcrvi2RlKfxg1t1hMT10Vmev7R
 CIgyZfxBicIInzU8bFB0d7lS9jPPAIJNuZTCEob/+sE72RK8a2TUT+agpgzfBiC8
 z4D8UU766n/BoyeiFeFeM7HIEe4fl75bqzUW+PHLqoW5HDiz05tBEAhOlPJXrJeM
 35tp8aNUcRFCb8K95bBstDbTgCFlChVNN99+5CQ2rCokPXegW1ldCfRCpXVSuigm
 KT4T073b8/pfrGxiNpKDs1zV5N2Om6g25CLBi1KztenOlT7iancAI72uWxFasc/I
 0VNIZQCMYeR6r8OcUBgquxYQG8JAHf8oNcmqU97UE4jFWY/K/O+WLmwzhw9aifib
 An3bsmo76Q0JTPmqMhbEGpjSM8DygKHqMnXy1Tzzi6EKOQMjnRDFT1uexRH/HPo6
 hdaKUfyeMIY9U6n+YA8VrBn/5BnpsucEpKjMB7KxlyL+NwRVdXQ8axz7SnXkJrHY
 vdobSzQs0TBA7oo0mnWR9AF+MG2yr/bb5yFwTVsg82kexmPw90oVyisIpExNZyTg
 vnrsfdSyGvpGLP9ganMSfgA9TQ+xUORrHp9cZM3yHKrmh5C3w65ynbA4LXsYwJ0h
 HlI+MNbhTjw0P4Iws/PX
 =Xwx6
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20180703-pull-request' into staging

vga: disable global_vmstate, virtio-gpu scanout tracking fixes.

# gpg: Signature made Tue 03 Jul 2018 10:44:56 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20180703-pull-request:
  vga: disable global_vmstate for 3.0+ machine types
  virtio-gpu: disable scanout when backing resource is destroyed
  virtio-gpu: update old resource too.
  virtio-gpu: tweak scanout disable.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/display/qxl.c
#	hw/display/vga-isa-mm.c
2018-07-03 21:09:27 +01:00
Gerd Hoffmann
1fcfdc435a vga: disable global_vmstate for 3.0+ machine types
Move global_vmstate from vga_common_init() parameter to VGACommonState
field.  Set global_vmstate to true for isa vga devices, so nothing
changes here.  virtio-vga and secondary-vga already set global_vmstate
to false so no change here either.  All other pci vga devices get a new
global-vmstate property, defaulting to false.  A compat property flips
it to true for older machine types.

With this in place you don't get a vmstate section naming conflict any
more when adding multiple pci vga devices to your vm.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20180702163345.17892-1-kraxel@redhat.com>
2018-07-03 11:19:49 +02:00
Philippe Mathieu-Daudé
f0353b0d10 hw/display: Use the IEC binary prefix definitions
It eases code review, unit is explicit.

Patch generated using:

  $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/

and modified manually.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20180625124238.25339-15-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02 15:41:13 +02:00
Markus Armbruster
e688df6bc4 Include qapi/error.h exactly where needed
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.

While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-09 13:50:17 +01:00
Frediano Ziglio
9fedfa4909 spice: remove QXLWorker interface field
This fields points to an old interface that is no more
used in the current code.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20171122135625.16625-1-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-12 14:35:58 +01:00
Eduardo Habkost
fd3b02c889 pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devices
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of
TYPE_PCI_DEVICE, except:

1) The ones that already have INTERFACE_PCIE_DEVICE set:

* base-xhci
* e1000e
* nvme
* pvscsi
* vfio-pci
* virtio-pci
* vmxnet3

2) base-pci-bridge

Not all PCI bridges are Conventional PCI devices, so
INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes
that are actually Conventional PCI:

* dec-21154-p2p-bridge
* i82801b11-bridge
* pbm-bridge
* pci-bridge

The direct subtypes of base-pci-bridge not touched by this patch
are:

* xilinx-pcie-root: Already marked as PCIe-only.
* pcie-pci-bridge: Already marked as PCIe-only.
* pcie-port: all non-abstract subtypes of pcie-port are already
  marked as PCIe-only devices.

3) megasas-base

Not all megasas devices are Conventional PCI devices, so the
interface names are added to the subclasses registered by
megasas_register_types(), according to information in the
megasas_devices[] array.

"megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add
INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas".

Acked-by: Alberto Garcia <berto@igalia.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15 05:54:43 +03:00
Dr. David Alan Gilbert
44b1ff319c migration: pre_save return int
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.

Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.

Note: If you add an error exit in your pre_save you must emit
an error_report to say why.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-27 11:35:59 +01:00
Paolo Bonzini
47025a0193 qxl: call qemu_spice_display_init_common for secondary devices
Fixes this 2.10 regression:

  $ qemu-system-x86_64  -cpu host -m 6144 -vga qxl -device qxl
  qemu-system-x86_64: util/qemu-thread-posix.c:64: qemu_mutex_lock: Assertion `mutex->initialized' failed.

Reported-by: ademaria@redhat.com
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170814231552.24593-1-pbonzini@redhat.com
Cc: kraxel@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-15 15:04:51 +01:00
Peter Maydell
ce66d778cd hw/display/qxl.c Use memory_region_init_ram()
Switch to memory_region_init_ram(), since we pass the same DeviceState
to both memory_region_init_ram_nomigrate() and vmstate_register_ram().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-11-git-send-email-peter.maydell@linaro.org
2017-07-14 17:59:42 +01:00
Peter Maydell
1cfe48c1ce memory: Rename memory_region_init_ram() to memory_region_init_ram_nomigrate()
Rename memory_region_init_ram() to memory_region_init_ram_nomigrate().
This leaves the way clear for us to provide a memory_region_init_ram()
which does handle migration.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-4-git-send-email-peter.maydell@linaro.org
2017-07-14 17:59:42 +01:00
Halil Pasic
d2164ad35c vmstate: error hint for failed equal checks
In some cases a failing VMSTATE_*_EQUAL does not mean we detected a bug,
but it's actually the best we can do. Especially in these cases a verbose
error message is required.

Let's introduce infrastructure for specifying a error hint to be used if
equal check fails. Let's do this by adding a parameter to the _EQUAL
macros called _err_hint. Also change all current users to pass NULL as
last parameter so nothing changes for them.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>

Message-Id: <20170623144823.42936-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-28 11:18:44 +02:00
Juan Quintela
795c40b8bd migration: Create migration/blocker.h
This allows us to remove lots of includes of migration/migration.h

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-17 12:04:59 +02:00
Gerd Hoffmann
6f663d7be9 qxl: add xres and yres properties
Add properties for the default display resolution, pass
on that information to the guest so the driver can use it.

Also move up qxl_crc32() function so we don't need a
forward declaration.

Additionally guest driver updates are needed so the
guest driver will actually pick this up, which will
probably land in linux kernel 4.12.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170421092234.8368-1-kraxel@redhat.com
2017-04-24 10:12:28 +02:00
Gerd Hoffmann
86dbcdd9c7 qxl: add migration blocker to avoid pre-save assert
Cc: 1635339@bugs.launchpad.net
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170410113131.2585-1-kraxel@redhat.com
2017-04-11 08:38:17 +02:00
Marc-André Lureau
a703d3aef5 qxl: switch display on entering VGA
Since commit cd958edb1f, same size console resize is skipped. This
change broke QXL incoming migration in VGA mode,
qemu_spice_display_switch() is no longer called during qxl_post_load(),
because default message surface is of the same size, and during
displaychangelistener registration, PCIQXLDevice.mode is
QXL_MODE_UNDEFINED. This triggers a later crash on refresh:

==2634== Invalid read of size 4
==3516== at 0x65F3050: pixman_image_get_data (in /usr/lib64/libpixman-1.so.0.34.0)
==3516== by 0x6F0CEB: qemu_spice_create_update (spice-display.c:215)
==3516== by 0x6F1CC7: qemu_spice_display_refresh (spice-display.c:502)
==3516== by 0x58CF77: display_refresh (qxl.c:1948)
==3516== by 0x6E8084: do_safe_dpy_refresh (console.c:1591)
==3516== by 0x6E80D5: dpy_refresh (console.c:1604)
==3516== by 0x6E4508: gui_update (console.c:201)
==3516== by 0x81898E: timerlist_run_timers (qemu-timer.c:536)
==3516== by 0x8189D6: qemu_clock_run_timers (qemu-timer.c:547)
==3516== by 0x818D98: qemu_clock_run_all_timers (qemu-timer.c:662)
==3516== by 0x81952A: main_loop_wait (main-loop.c:514)
==3516== by 0x4ADD29: main_loop (vl.c:1898)

One way to solve this is to explicitely call qemu_spice_display_switch()
on entering VGA mode, which is called during qxl_post_load().

Fixes:
"null pointer access on migration resume of systemrescuecd boot menu with qxl-vga"
https://bugs.launchpad.net/qemu/+bug/1679126
https://bugzilla.redhat.com/show_bug.cgi?id=1438566

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170406120513.638-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-07 12:31:46 +02:00
Gerd Hoffmann
dbb5fb8d35 qxl: clear guest_cursor on QXL_CURSOR_HIDE
Make sure we don't leave guest_cursor pointing into nowhere.  This might
lead to (rare) live migration failures, due to target trying to restore
the cursor from the stale pointer.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1421788
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1488789111-27340-1-git-send-email-kraxel@redhat.com
2017-03-09 09:47:26 +01:00
Michael S. Tsirkin
df45892c12 qxl: switch to constants within BUILD_BUG_ON
We are switching BUILD_BUG_ON to verify that it's parameter is a
compile-time constant, and it turns out that some gcc versions
(specifically gcc (Ubuntu 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609) are
not smart enough to figure it out for expressions involving local
variables. This is harmless but means that the check is ineffective for
these platforms.  To fix, replace variables with macros.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2017-01-31 15:57:27 +02:00
Christophe Fergeau
6c7565028c qxl: Only emit QXL_INTERRUPT_CLIENT_MONITORS_CONFIG on config changes
Currently if the client keeps sending the same monitor config to
QEMU/spice-server, QEMU will always raise
a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG regardless of whether there was a
change or not.
Guest-side (with fedora 25), the kernel QXL KMS driver will also forward the
event to user-space without checking if there were actual changes.
Next in line are gnome-shell/mutter (on a default f25 install), which
will try to reconfigure everything without checking if there is anything
to do.
Where this gets ugly is that when applying the resolution changes,
gnome-shell/mutter will call drmModeRmFB, drmModeAddFB, and
drmModeSetCrtc, which will cause the primary surface to be destroyed and
recreated by the QXL KMS driver. This in turn will cause the client to
resend a client monitors config message, which will cause QEMU to reemit
an interrupt with an unchanged monitors configuration, ...
This causes https://bugzilla.redhat.com/show_bug.cgi?id=1266484

This commit makes sure that we only emit
QXL_INTERRUPT_CLIENT_MONITORS_CONFIG when there are actual configuration
changes the guest should act on.

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Message-id: 20161028144840.18326-1-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-12-05 09:37:52 +01:00
Gerd Hoffmann
e0127d2eec qxl: fix qxl_set_dirty call in qxl_dirty_one_surface
qxl_set_dirty() expects start and end as range specification.
qxl_dirty_one_surface passes 'size' instead of 'offset + size' as end
parameter.  Fix that.  Also use uint64_t everywhere while being at it.

Bug was added by "e25139b qxl: set only off-screen surfaces dirty instead
of the whole vram" and carried forward unnoticed by "5cdc402 qxl: fix
surface migration".

Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1468413187-22071-1-git-send-email-kraxel@redhat.com
2016-07-20 12:08:14 +02:00
John Snow
015e02f880 spice: avoid .set_mm_time on >= 0.12.6
Spice deprecated this callback in 0.12.6.
It's not a problem yet, but it will cause Clang to fail in a -Werror
build due to the deprecated tag.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1467240095-12507-2-git-send-email-jsnow@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-07-06 10:31:57 +02:00
Gerd Hoffmann
1331eab216 qxl: fix surface migration
Create a helper function qxl_dirty_one_surface() to mark a single qxl
surface as dirty.  Use the new qxl_get_check_slot_offset function and
lookup the memory region from the slot instead of assuming the surface
is stored in vram.

Use the new helper function in qxl_dirty_surfaces, for both primary and
off-screen surfaces.  For off-screen surfaces this is no functional
change.  For primary surfaces this will dirty only the memory actually
used instead of the whole surface0 region.  It will also work correctly
in case the guest places the primary surface in vram instead of the
surface0 region (linux kms driver does that).

https://bugzilla.redhat.com/show_bug.cgi?id=1235732

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1466597244-5938-3-git-send-email-kraxel@redhat.com
2016-07-06 10:31:11 +02:00
Gerd Hoffmann
3cb5158f15 qxl: store memory region and offset instead of pointer for guest slots
Store MemoryRegion and offset instead of a pointer for each qxl memory
slot, so we can easily figure in which memory region an qxl object
stored.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1466597244-5938-2-git-send-email-kraxel@redhat.com
2016-07-06 10:31:11 +02:00
Gerd Hoffmann
726bdf653a qxl: factor out qxl_get_check_slot_offset
New helper function which translates a qxl physical address into
memory slot and offset.  Also applies sanity checks.  Factored out
from qxl_phys2virt.  No functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1466597244-5938-1-git-send-email-kraxel@redhat.com
2016-07-06 10:31:11 +02:00
Gerd Hoffmann
2f5ae772c6 qxl: handle no updates in interface_update_area_complete
Simply return early in case there are no updated rects.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1465395101-13580-1-git-send-email-kraxel@redhat.com
2016-07-06 10:31:02 +02:00
Gerd Hoffmann
de1b9b85ef qxl: use uint64_t for vram size
This allows for the 64bit vram bar to become larger than 2G
(try -device qxl-vga,vram64_size_mb=8192).

https://bugzilla.redhat.com/show_bug.cgi?id=1340439

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1465389648-5179-1-git-send-email-kraxel@redhat.com
2016-07-06 10:30:50 +02:00
Gerd Hoffmann
05fa1c742f qxl: lock current_async update in qxl_soft_reset
This should fix a defect report from Coverity.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-01 07:51:32 +01:00
Peter Maydell
47df5154c3 hw/display: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-21-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:24 +00:00
Markus Armbruster
9de68637df qxl: Use g_new() & friends where that makes obvious sense
g_new(T, n) is neater than g_malloc(sizeof(T) * n).  It's also safer,
for two reasons.  One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.

This commit only touches allocations with size arguments of the form
sizeof(T).  Same Coccinelle semantic patch as in commit b45c03f.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-11-06 15:42:38 +03:00
Markus Armbruster
f8ed85ac99 Fix bad error handling after memory_region_init_ram()
Symptom:

    $ qemu-system-x86_64 -m 10000000
    Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456:
    upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory
    Aborted (core dumped)

Root cause: commit ef701d7 screwed up handling of out-of-memory
conditions.  Before the commit, we report the error and exit(1), in
one place, ram_block_add().  The commit lifts the error handling up
the call chain some, to three places.  Fine.  Except it uses
&error_abort in these places, changing the behavior from exit(1) to
abort(), and thus undoing the work of commit 3922825 "exec: Don't
abort when we can't allocate guest memory".

The three places are:

* memory_region_init_ram()

  Commit 4994653 (right after commit ef701d7) lifted the error
  handling further, through memory_region_init_ram(), multiplying the
  incorrect use of &error_abort.  Later on, imitation of existing
  (bad) code may have created more.

* memory_region_init_ram_ptr()

  The &error_abort is still there.

* memory_region_init_rom_device()

  Doesn't need fixing, because commit 33e0eb5 (soon after commit
  ef701d7) lifted the error handling further, and in the process
  changed it from &error_abort to passing it up the call chain.
  Correct, because the callers are realize() methods.

Fix the error handling after memory_region_init_ram() with a
Coccinelle semantic patch:

    @r@
    expression mr, owner, name, size, err;
    position p;
    @@
            memory_region_init_ram(mr, owner, name, size,
    (
    -                              &error_abort
    +                              &error_fatal
    |
                                   err@p
    )
                                  );
    @script:python@
        p << r.p;
    @@
    print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column)

When the last argument is &error_abort, it gets replaced by
&error_fatal.  This is the fix.

If the last argument is anything else, its position is reported.  This
lets us check the fix is complete.  Four positions get reported:

* ram_backend_memory_alloc()

  Error is passed up the call chain, ultimately through
  user_creatable_complete().  As far as I can tell, it's callers all
  handle the error sanely.

* fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize()

  DeviceClass.realize() methods, errors handled sanely further up the
  call chain.

We're good.  Test case again behaves:

    $ qemu-system-x86_64 -m 10000000
    qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory
    [Exit 1 ]

The next commits will repair the rest of commit ef701d7's damage.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-18 14:39:29 +02:00
Frediano Ziglio
a52b2cbf21 qxl: Fix new function name for spice-server library
The new spice-server function to limit the number of monitors (0.12.6)
changed while development from spice_qxl_set_monitors_config_limit to
spice_qxl_max_monitors (accepted upstream).
By mistake I post patch with former name.
This patch fix the function name.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Acked-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2015-07-22 16:38:42 +02:00
Frediano Ziglio
567161fdd4 qxl: allow to specify head limit to qxl driver
This patch allow to limit number of heads using qxl driver. By default
qxl driver is not limited on any kind on head use so can decide to use
as much heads.

libvirt has this as a video card parameter (actually set to 1 but not
used). This parameter will allow to limit setting a use can do (which
could be confusing).

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-07-16 17:31:05 +02:00
Markus Armbruster
a0b1a66ea3 Include monitor/monitor.h exactly where needed
In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:41 +02:00
Juan Quintela
5cd8cadae8 migration: Use normal VMStateDescriptions for Subsections
We create optional sections with this patch.  But we already have
optional subsections.  Instead of having two mechanism that do the
same, we can just generalize it.

For subsections we just change:

- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
  it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
  VMStateDescription

Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12 06:53:57 +02:00
Gerd Hoffmann
641381c1fc spice: don't update mm_time when spice-server is stopped.
Skip mm_time updates (in qxl device memory) in case the guest is stopped.
Guest isn't able to look anyway, and it causes problems with migration.

Also make sure the initial state for spice server is stopped.

Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-05-29 09:56:01 +02:00
Gonglei
c69f6c7dcf qxl: QOMify
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-05-19 11:40:01 +02:00
Chih-Min Chao
c9f88ce330 hw/display : remove 'struct' from 'typedef QXL struct'
Signed-off-by: Chih-Min Chao <cmchao@gmail.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-30 16:05:48 +03:00
Peter Maydell
0048fa6c80 pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
 All of ACPI refactoring has been merged.
 Legacy pci commands have been dropped.
 virtio header cleanup
 initial patches from virtio-1.0 branch
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
 kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
 MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
 WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
 HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
 w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
 =LY/j
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio fixes and cleanups

A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

* remotes/mst/tags/for_upstream: (130 commits)
  acpi: drop unused code
  aml-build: comment fix
  acpi-build: fix typo in comment
  acpi: update generated files
  vhost user:support vhost user nic for non msi guests
  aml-build: fix build for glib < 2.22
  acpi: update generated files
  Makefile.target: binary depends on config-devices
  acpi-test-data: update after pci rewrite
  acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
  pci-hotplug-old: Has been dead for five major releases, bury
  pci: Give a few helpers internal linkage
  acpi: make build_*() routines static to aml-build.c
  pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
  pc: acpi-build: drop template patching and create PCI bus tree dynamically
  tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
  pc: acpi-build: simplify PCI bus tree generation
  tests: add ACPI blobs for qemu with bridge cases
  tests: bios-tables-test: add support for testing bridges
  tests: ACPI test blobs update due to PCI0._CRS changes
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Conflicts:
	hw/pci/pci-hotplug-old.c
2015-03-09 09:14:28 +00:00
Gerd Hoffmann
20ca3763ab qxl: drop update_displaychangelistener call for secondary qxl devices
Commit 3dcadce507 added three
update_displaychangelistener call sites:

Two for primary qxl cards, when entering/leaving vga mode, which are
correct.

One for secondary qxl cards, which is wrong because we don't register
a displaychangelistener in the first place for secondary cards.

Remove it.

Reported-by: Brad Campbell <lists2009@fnarfbargle.com>
Tested-by: Brad Campbell <lists2009@fnarfbargle.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-03 08:33:08 +01:00
Radim Krčmář
bb7443f6d6 qxl: refactor rounding up to a nearest power of 2
We already have pow2floor, mirror it and use instead of a function with
similar results (same in used domain), to clarify our intent.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-03 08:33:08 +01:00
Radim Krčmář
876d516311 spice: fix invalid memory access to vga.vram
vga_common_init() doesn't allow more than 256 MiB vram size and silently
shrinks any larger value.  qxl_dirty_surfaces() used the unshrinked size
via qxl->shadow_rom.surface0_area_size when accessing the memory, which
resulted in segfault.

Add a workaround for this case and an assert if it happens again.

We have to bump the vga memory limit too, because 256 MiB wouldn't have
allowed 8k (it requires more than 128 MiB).
1024 MiB doesn't work, but 512 MiB seems fine.

Proposed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-03 08:33:08 +01:00
Radim Krčmář
03d9825d15 qxl: document minimal video memory for new modes
The alternative to removing existing comments.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-03 08:33:08 +01:00
Markus Armbruster
042a24db0a qxl: Convert to realize
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2015-02-26 12:42:17 +01:00
Gerd Hoffmann
3dcadce507 spice: reduce refresh rate in native mode
Now that cursor updates are out of the way qxl needs the refresh timer
only when when running in vga mode, for dirty bitmap checking.  In
native qxl mode the guest will notify us, so we don't need to poll and
can use the idle interval (one refresh wakeup every few seconds).

Cc: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-12-16 14:15:29 +01:00
Gerd Hoffmann
0b2824e5e4 spice: use bottom half instead of refresh timer for cursor updates
Calling directly doesn't work due to the qxl-render code running in
spice server thread context.  Meanwhile bottom half scheduling is
thread-safe though, so we can use that to kick a cursor update in
main i/o thread context.

Cc: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-12-16 14:15:29 +01:00
Marc-André Lureau
9e5a25f1c2 qxl: keep going if reaching guest bug on empty area
Xorg server hangs when using xfig and typing a text with space:
 #0  qxl_wait_for_io_command (qxl=<value optimized out>) at qxl_io.c:47
 #1  0x00007f826a49a299 in qxl_download_box (surface=0x221d030, x1=231, y1=259,
     x2=<value optimized out>, y2=<value optimized out>) at qxl_surface.c:143

       while (!(ram_header->int_pending & QXL_INTERRUPT_IO_CMD))
         usleep (1);

The QXL driver is calling QXL_IO_UPDATE_AREA with an empty area. This
is a guest bug. The call is async and no ack is sent back on guest
bug, so the X server will hang. The driver should be improved to avoid
this situation and also to abort on QXL_INTERRUPT_ERROR. This will be
a different patch series for the driver. However, it is simple enough
to keep qemu running on empty areas update, which is what this patch
provides.

https://bugzilla.redhat.com/show_bug.cgi?id=1151363

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 11:08:34 +02:00