Add a registry for user interfaces. Add qemu_display_init and
qemu_display_early_init helper functions for display initialization.
Hook up gtk ui as first user.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-2-kraxel@redhat.com
If netdev_add tap,id=net0,...,vhost=on failed in net_init_tap_one(),
the followed up device_add virtio-net-pci,netdev=net0 will fail
too, prints:
TUNSETOFFLOAD ioctl() failed: Bad file descriptor TUNSETOFFLOAD
ioctl() failed: Bad file descriptor
The reason is that the fd of tap is closed when error occured after
calling net_init_tap_one().
The fd should be closed when calling net_init_tap_one failed:
- if tap_set_sndbuf() failed
- if tap_set_sndbuf() succeeded but vhost failed to open or
initialize with vhostforce flag on
- with wrong vhost command line parameter
The fd should not be closed just because vhost failed to open or
initialize but without vhostforce flag. So the followed up
device_add can fall back to userspace virtio successfully.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The legacy "-net" option can be quite confusing for the users since most
people do not expect to get a "vlan" hub between their emulated guest
hardware and the host backend. But so far, we are also not able to get
rid of "-net" completely, since it is the only way to configure on-board
NICs that can not be instantiated via "-device" yet. It's also a little
bit shorter to type "-net nic -net tap" instead of "-device xyz,netdev=n1
-netdev tap,id=n1".
So what we need is a new convenience option that is shorter to type than
the full -device + -netdev stuff, and which can be used to configure the
on-board NICs that can not be handled via -device yet. Thus this patch now
provides such a new option "--nic": It adds an entry in the nd_table to
configure a on-board / default NIC, creates a host backend and connects
the two directly, without a confusing "vlan" hub inbetween.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The function is only used within net.c, so there's no need that
this is a global function.
While we're at it, also remove the unused prototype compute_mcast_idx()
(the function has been removed in commit d9caeb09b107e91122d10ba4a08a).
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It looks strange that net_init_client() and net_init_netdev() both
take an "Error **errp" parameter, but then do the error reporting
with "error_report_err(local_err)" on their own. Let's move the
error reporting to the calling site instead to simplify this code
a little bit.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since f3218a8 ("softfloat: add floatx80 constants")
floatx80_infinity is defined but never used.
This patch updates floatx80 functions to use
this definition.
This allows to define a different default Infinity
value on m68k: the m68k FPU defines infinity with
all bits set to zero in the mantissa.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180224201802.911-4-laurent@vivier.eu>
Move fpu/softfloat-macros.h to include/fpu/
Export floatx80 functions to be used by target floatx80
specific implementations.
Exports:
propagateFloatx80NaN(), extractFloatx80Frac(),
extractFloatx80Exp(), extractFloatx80Sign(),
normalizeFloatx80Subnormal(), packFloatx80(),
roundAndPackFloatx80(), normalizeRoundAndPackFloatx80()
Also exports packFloat32() that will be used to implement
m68k fsinh, fcos, fsin, ftan operations.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180224201802.911-2-laurent@vivier.eu>
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
BlockDriver->bdrv_create() has been called from coroutine context since
commit 5b7e1542cfa41a281af9629d31cef03704d976e6 ("block: make
bdrv_create adopt coroutine").
Make this explicit by renaming to .bdrv_co_create_opts() and add the
coroutine_fn annotation. This makes it obvious to block driver authors
that they may yield, use CoMutex, or other coroutine_fn APIs.
bdrv_co_create is reserved for the QAPI-based version that Kevin is
working on.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170705102231.20711-2-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriverState has the BDRV_POLL_WHILE() macro to wait on event loop
activity while a condition evaluates to true. This is used to implement
synchronous operations where it acts as a condvar between the IOThread
running the operation and the main loop waiting for the operation. It
can also be called from the thread that owns the AioContext and in that
case it's just a nested event loop.
BlockBackend needs this behavior but doesn't always have a
BlockDriverState it can use. This patch extracts BDRV_POLL_WHILE() into
the AioWait abstraction, which can be used with AioContext and isn't
tied to BlockDriverState anymore.
This feature could be built directly into AioContext but then all users
would kick the event loop even if they signal different conditions.
Imagine an AioContext with many BlockDriverStates, each time a request
completes any waiter would wake up and re-check their condition. It's
nicer to keep a separate AioWait object for each condition instead.
Please see "block/aio-wait.h" for details on the API.
The name AIO_WAIT_WHILE() avoids the confusion between AIO_POLL_WHILE()
and AioContext polling.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The name aio_context_in_iothread() is misleading because it also returns
true when called on the main AioContext from the main loop thread, which
is not an IOThread.
This patch renames it to in_aio_context_home_thread() and expands the
doc comment to make the semantics clearer.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Now that all drivers have been updated to provide the
byte-based .bdrv_co_block_status(), we can delete the sector-based
interface.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the generic helpers, and all passthrough clients
(blkdebug, commit, mirror, throttle) accordingly.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Now that the block layer exposes byte-based allocation,
it's time to tackle the drivers. Add a new callback that operates
on as small as byte boundaries. Subsequent patches will then update
individual drivers, then finally remove .bdrv_co_get_block_status().
The new code also passes through the 'want_zero' hint, which will
allow subsequent patches to further optimize callers that only care
about how much of the image is allocated (want_zero is false),
rather than full details about runs of zeroes and which offsets the
allocation actually maps to (want_zero is true). As part of this
effort, fix another part of the documentation: the claim in commit
4c41cb4 that BDRV_BLOCK_ALLOCATED is short for 'DATA || ZERO' is a
lie at the block layer (see commit e88ae2264), even though it is
how the bit is computed from the driver layer. After all, there
are intentionally cases where we return ZERO but not ALLOCATED at
the block layer, when we know that a read sees zero because the
backing file is too short. Note that the driver interface is thus
slightly different than the public interface with regards to which
bits will be set, and what guarantees are provided on input.
We also add an assertion that any driver using the new callback will
make progress (the only time pnum will be 0 is if the block layer
already handled an out-of-bounds request, or if there is an error);
the old driver interface did not provide this guarantee, which
could lead to some inf-loops in drastic corner-case failures.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add remaining easy registers to iotkit-secctl:
* NSCCFG just routes its two bits out to external GPIO lines
* BRGINSTAT/BRGINTCLR/BRGINTEN can be dummies, because QEMU's
bus fabric can never report errors
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180220180325.29818-18-peter.maydell@linaro.org
The IoTKit Security Controller includes various registers
that expose to software the controls for the Peripheral
Protection Controllers in the system. Implement these.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-17-peter.maydell@linaro.org
The Arm IoT Kit includes a "security controller" which is largely a
collection of registers for controlling the PPCs and other bits of
glue in the system. This commit provides the initial skeleton of the
device, implementing just the ID registers, and a couple of read-only
read-as-zero registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-16-peter.maydell@linaro.org
Add a model of the TrustZone peripheral protection controller (PPC),
which is used to gate transactions to non-TZ-aware peripherals so
that secure software can configure them to not be accessible to
non-secure software.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-15-peter.maydell@linaro.org
The MPS2 AN505 FPGA image includes a "FPGA control block"
which is a small set of registers handling LEDs, buttons
and some counters.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-14-peter.maydell@linaro.org
In some board or SoC models it is necessary to split a qemu_irq line
so that one input can feed multiple outputs. We currently have
qemu_irq_split() for this, but that has several deficiencies:
* it can only handle splitting a line into two
* it unavoidably leaks memory, so it can't be used
in a device that can be deleted
Implement a qdev device that encapsulates splitting of IRQs, with a
configurable number of outputs. (This is in some ways the inverse of
the TYPE_OR_IRQ device.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-13-peter.maydell@linaro.org
The function qdev_init_gpio_in_named() passes the DeviceState pointer
as the opaque data pointor for the irq handler function. Usually
this is what you want, but in some cases it would be helpful to use
some other data pointer.
Add a new function qdev_init_gpio_in_named_with_opaque() which allows
the caller to specify the data pointer they want.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-12-peter.maydell@linaro.org
The or-irq.h header file is missing the customary guard against
multiple inclusion, which means compilation fails if it gets
included twice. Fix the omission.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-11-peter.maydell@linaro.org
Move the definition of the struct for the unimplemented-device
from unimp.c to unimp.h, so that users can embed the struct
in their own device structs if they prefer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-10-peter.maydell@linaro.org
Create an "init-svtor" property on the armv7m container
object which we can forward to the CPU object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-8-peter.maydell@linaro.org
Create an "idau" property on the armv7m container object which
we can forward to the CPU object. Annoyingly, we can't use
object_property_add_alias() because the CPU object we want to
forward to doesn't exist until the armv7m container is realized.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-6-peter.maydell@linaro.org
Add a function load_ramdisk_as() which behaves like the existing
load_ramdisk() but allows the caller to specify the AddressSpace
to use. This matches the pattern we have already for various
other loader functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180220180325.29818-2-peter.maydell@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow the guest to determine the time set from the QEMU command line.
This includes adding a trace event to debug the new time.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Initial commit of the ZynqMP RTC device.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Expose the new constants and structs that will be used by both
server and client implementations of NBD_CMD_BLOCK_STATUS (the
command is currently experimental at
https://github.com/NetworkBlockDevice/nbd/blob/extension-blockstatus/doc/proto.md
but will hopefully be stabilized soon).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1518702707-7077-4-git-send-email-vsementsov@virtuozzo.com>
[eblake: split from larger patch on server implementation]
Signed-off-by: Eric Blake <eblake@redhat.com>
Prepared indenting for the following patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1518702707-7077-3-git-send-email-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
information
- remove s390x memory hotplug implementation, which is not useable in
this form
- add boot menu support in the s390-ccw bios
- expose s390x guest crash information
- fixes and cleaups
-----BEGIN PGP SIGNATURE-----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=chDT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180301-v2' into staging
- add query-cpus-fast and deprecate query-cpus, while adding s390 cpu
information
- remove s390x memory hotplug implementation, which is not useable in
this form
- add boot menu support in the s390-ccw bios
- expose s390x guest crash information
- fixes and cleaups
# gpg: Signature made Thu 01 Mar 2018 12:54:47 GMT
# gpg: using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20180301-v2: (27 commits)
s390x/tcg: fix loading 31bit PSWs with the highest bit set
s390x: remove s390_get_memslot_count
s390x/sclp: remove memory hotplug support
s390x/cpumodel: document S390FeatDef.bit not applicable
hmp: change hmp_info_cpus to use query-cpus-fast
qemu-doc: deprecate query-cpus
qmp: add architecture specific cpu data for query-cpus-fast
qmp: add query-cpus-fast
qmp: expose s390-specific CPU info
s390x/tcg: add various alignment checks
s390x/tcg: fix disabling/enabling DAT
s390/stattrib: Make SaveVMHandlers data static
s390x/cpu: expose the guest crash information
pc-bios/s390: Rebuild the s390x firmware images with the boot menu changes
s390-ccw: interactive boot menu for scsi
s390-ccw: use zipl values when no boot menu options are present
s390-ccw: set cp_receive mask only when needed and consume pending service irqs
s390-ccw: read user input for boot index via the SCLP console
s390-ccw: print zipl boot menu
s390-ccw: read stage2 boot loader data to find menu
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce two vhost-user meassges: VHOST_USER_CREATE_CRYPTO_SESSION
and VHOST_USER_CLOSE_CRYPTO_SESSION. At this point, the QEMU side
support crypto operation in cryptodev host-user backend.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Impliment the vhost-crypto's funtions, such as startup,
stop and notification etc. Introduce an enum
QCryptoCryptoDevBackendOptionsType in order to
identify the cryptodev vhost backend is vhost-user
or vhost-kernel-module (If exist).
At this point, the cryptdoev-vhost-user works.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As some of the constants here will also be needed
elsewhere (specifically for the upcoming SVE support) we move them out
to softfloat.h.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180227143852.11175-13-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows us to explicitly pass float16 to helpers rather than
assuming uint32_t and dealing with the result. Of course they will be
passed in i32 sized registers by default.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180227143852.11175-2-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
