When running in thumb mode, Linux doesn't evaluate the immediate value
of the svc instruction, but instead just always assumes the syscall number
to be in r7.
This fixes executing go_bootstrap while building go for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Roll the code used to initialize the guest memory space when -R
or -B is used into 'init_guest_space' and then call 'init_guest_space'
from the driver. This way the reserved guest memory space can
be probed for. Calling 'mmap' just once as is currently done is not
guaranteed to succeed since the host address space validation might fail.
Signed-off-by: Meador Inge <meadori@codesourcery.com>
[PMM: Fixed minor whitespace errors.]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current bss clear logic assumes the target mmap address and host
address are the same. Use g2h to translate from the target address
space to the host so we can call memset on it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The code to initialise the target_to_host_errno_table[] array was
accidentally inside the loop through checking and initialising all
the supported ioctls. This was harmless but meant that we reinitialised the
array several hundred times on startup.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the SNDCTL_DSP_MAP{IN,OUT}BUF ioctl definitions so that they
refer to a suitably defined target struct layout rather than hardcoding
the ioctl number. This fixes complaints from the syscall_init()
consistency check when running an x86_64-to-x86_64 linux-user qemu.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The definitions for the ioctl numbers TARGET_BLKBSZGET and
TARGET_BLKBSZSET had the wrong size parameters (they are defined
with size_t, not int, even though the ioctl implementations themselves
read and write integers). Since commit 354a0008 we now have an
ioctl wrapper definition for BLKBSZGET and so on an x86-64-to-x86-64
linux-user binary we were triggering the mismatch warning in
syscall_init().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch initializes the cpuid to exactly correct value because
linux kernel will check it.
In addition, the exception types are specified in proper situations.
Then it could make exceptions generated correctly and timely.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
err was uninitialized, it's not OK to use |=. Spotted by Clang
compiler.
Fix by implementing the earlier statement which initializes the variable.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Alpha uses unbiased priority values in the syscall, with the a3
return value signaling error conditions. Therefore, properly
interpret the libc getpriority as needed for the guest rather
than passing the host value through unchanged.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Name the syscall properly for QEMU, kernel source notwithstanding.
Fix syntax errors in the code thus enabled within do_syscall.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
If we let the kernel handle the implementation of mmap_find_vma,
via an anon mmap, we must use the size as indicated by the user
and not the size truncated to the filesize.
This happens often in ld.so, where we initially mmap the file to
the size of the text+data+bss to reserve an area, then mmap+fixed
over the top to properly handle data and bss.
Signed-off-by: Richard Henderson <rth@twiddle.net>
For each target, only define the bits that appear in
arch/target/include/asm/fcntl.h. Mirror the kernel's
asm-generic layout by handling anything undefined afterward.
Signed-off-by: Richard Henderson <rth@twiddle.net>
We weren't aggregating the exceptions, nor raising signals properly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Proper signal numbers were not defined, and EXCP_INTERRUPT
was unhandled, leading to all sorts of subtle confusion.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For command line options which permit '?' meaning 'please list the
permitted values', add support for 'help' as a synonym, by abstracting
the check out into a helper function.
This change means that in some cases where we were being lazy in
our string parsing, "?junk" will now be rejected as an invalid option
rather than being (undocumentedly) treated the same way as "?".
Update the documentation to use 'help' rather than '?', since '?'
is a shell metacharacter and thus prone to fail confusingly if there
is a single character filename in the current working directory and
the '?' has not been escaped. It's therefore better to steer users
towards 'help', though '?' is retained for backwards compatibility.
We do not, however, update the output of the system emulator's -help
(or any documentation autogenerated from the qemu-options.hx which
is the source of the -help text) because libvirt parses our -help
output and will break. At a later date when QEMU provides a better
interface so libvirt can avoid having to do this, we can update the
-help text too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
glibc 2.16 will remove the undocumented definition of 'struct siginfo'
from <bits/siginfo.h>.
This change is already present in glibc 2.15.90, so qemu compilation
of certain targets (eg. cris-user) breaks.
This struct was always typedef'd to be the same as 'siginfo_t' which
is what POSIX documents, so use that instead.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Don't use global variables directly but via accessor functions. Rename globals.
Convert macros to functions, add GCC format attributes.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All the uses of ARM_CPUID() to vary behaviour have now been
removed, so we can delete the ARM_CPUID_* macros now.
The one exception is the TI915T/925T, because of its odd behaviour
where the MIDR value can be changed at runtime.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
If we execute linux-user code that does the following:
* A = mmap()
* execute code in A
* munmap(A)
* B = mmap(), but mmap returns the same address as A
* execute code in B
we end up executing a stale cached tb that contains translated code
from A, while we want new code from B.
This patch adds a TB flush for mmap'ed regions, before we return them,
avoiding the whole issue. It also adds a flush for munmap, so that we
don't execute stale TBs instead of getting a segfault.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Improve the emulation of /proc/self/maps by reading the underlying
host maps file and passing lines through with addresses adjusted
to be guest addresses. This is necessary to avoid false triggers
of the glibc check that a format string containing '%n' is not in
writable memory. (For an example see the bug reported in
https://bugs.launchpad.net/qemu-linaro/+bug/947888 where gpg aborts.)
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
After all target CPUs have been QOM'ified, we no longer need an #ifdef
to switch between object_delete() and g_free() in NPTL thread exit.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For QOM'ified CPUs we cannot g_free() CPUArchState, we must
object_delete() the object it is embedded into.
Fixes LP#982321 (invalid free() while executing pacman with qemu-arm).
Reported-by: Serge Schneider <serge@xecdesign.com>
Reported-by: Russell Keith Davis <russell@russelldavis.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Serge Schneider <serge@xecdesign.com>
Tested-by: Russell Keith Davis <russell@russelldavis.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add support for ARM BE8 userspace binaries.
i.e. big-endian data and little-endian code.
In principle LE8 mode is also possible, but AFAIK has never actually
been implemented/used.
System emulation doesn't have any useable big-endian board models,
but should in principle work once you fix that.
Dynamic endianness switching requires messing with data accesses,
preferably with TCG cooperation, and is orthogonal to BE8 support.
Signed-off-by: Paul Brook <paul@codesourcery.com>
[PMM: various changes, mostly as per my suggestions in code review:
* rebase
* use EF_ defines rather than hardcoded constants
* make bswap_code a bool for future VMSTATE macro compatibility
* update comment in cpu.h about TB flags bit field usage
* factor out load-code-and-swap into arm_ld*_code functions and
get_user_code* macros
* fix stray trailing space at end of line
* added braces in disas.c to satisfy checkpatch
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The cpu capabilities passed by the elf loader in AT_HWCAP where
a constant.
Make AT_HWCAP reflect the emulated cpu features in order to give
correct clues to eglibc.
Riku Voipio: fixed to apply to current head
Fix : [Bug 887516] [NEW] VFP support reported for the PXA270
Signed-off-by: Benoit Canet <benoit.canet@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The list of ARM syscall numbers was missing the entry for ppoll,
which meant we were accidentally not providing it. (This wasn't
causing any practical issues beyond warnings about unimplemented
syscalls, because glibc will fall back to another code path if the
syscall isn't present.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add support for the prctl options PR_GET_NAME and PR_SET_NAME,
which take or return a name in a 16 byte buffer pointed to by arg2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Clean up the odd indentation of this switch statement before
we double its size by adding new cases to it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When running 32-on-64 bit guests, we should always reserve as much
virtual memory as we possibly can for the guest process, so it can
never overlap with QEMU address space.
Fortunately we already have the infrastructure for that. All that's
missing is some sane default value to also make use of it!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
After consulting with Paul Brook, we concluded that it's best to search
the VMA space downwards, so that we don't even get the chance to conflict
with the brk range.
This patch resolves a bunch of allocation conflicts when using -R.
Signed-off-by: Alexander Graf <agraf@suse.de>
[minor changes to get it to apply -- PMM]
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Fallocate gets off_t parameters passed in, so we should also read them out
accordingly.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- unbreak 64-bit guests
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch adds the ioctl wrapper definition for BLKBSZGET.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Some BLK ioctls passed sizeof(x) into a macro that already did sizeof() on
the passed in argument, rendering the size information inside the ioctl be
the size of the host default integer type.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The compat LOOP_SET_STATUS ioctl uses struct old_dev_t in its passed
struct. That variable type is vastly different between different
architectures. Implement wrapping around it so we can use it.
This fixes running arm kpartx on an x86_64 host for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch implements all ioctls currently implemented by device mapper,
enabling us to run dmsetup and kpartx inside of linux-user.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
TaskState contains linux_bprm struct which encapsulates argv among
other things.
argv might be used around the code and is expected to contain valid
data. Before this patch, ts->bprm->argv was NULL due to it being
freed right after loader_exec().
Signed-off-by: Fabio Erculiani <lxnay@sabayon.org>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
With the current fake /proc/self/stat implementation `ps` is
segfaulting because it expects to read PID and argv[0] as first and
second field respectively, with the latter being enclosed between
backets.
Reproducing is as easy as running: `ps` inside qemu-user chroot
with /proc mounted.
Signed-off-by: Fabio Erculiani <lxnay@sabayon.org>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
All architectures work the same way, and all check for sas_ss_flags ==
0. The powerpc lines are wrong, and do the check the other way round
(it's a qemu internal check, which is done wrong only for this
architecture, it's more a typo than a bug). It's NOT ppc specific,
it's POSIX standard (sigaltstack) and qemu internal.
I have a test source that I will send in a follow-up (it's longer than
I would have wished, I'm sure that a better test case can be written
if needed)
Signed-off-by: Alex Barcelo <abarcelo@ac.upc.edu>
Signed-off-by: Alexander Graf <agraf@suse.de>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Frees the identifier cpu_reset for QOM CPUs (manual rename).
Don't hide the parameter type behind explicit casts, use static
functions with strongly typed argument to indirect.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Link the Object base class and the module infrastructure for class
registration. Introduce $(universal-obj-y) for objects that are more
common than $(common-obj-y), so that those only get built once.
Call QOM module init for type registration.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* it's -> its (fixed for all files)
* dont -> don't (only fixed in a line which was touched by the previous fix)
* distrub -> disturb (fixed in the same line)
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Fix format type mismatches in do_brk debug printfs.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
If the host's page size is equal to or smaller than the target's, native
execve() will fail appropriately with E2BIG if called with too big an
environment for the target to handle. It may falsely succeed, however, if
the host's page size is bigger, and feed the executed target process an
environment that is too big for it to handle, at which point QEMU barfs and
exits, confusing procmail's autoconf script and causing the build to fail.
This patch makes sure that execve() will return E2BIG if the environment is
too large for the target.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
sa_flags is uint32_t for mips{,n32,64}, so don't use tswapal().
edited by Riku Voipio: likewise on alpha
Reported-by: Khansa Butt <khansa@kics.edu.pk>
Suggested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Ehsan Ul Haq <ehsan.ulhaq@kics.edu.pk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Implement the f and l versions (operate on fd, don't follow links)
of the setxattr, getxattr and removexattr syscalls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
It's valid to pass a NULL value pointer to setxattr, so don't
fail this case EFAULT.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When calling wait4 or waitpid with a status pointer and WNOHANG, the
syscall can potentially not modify the status pointer input. Now if we
have guest code like:
int status = 0;
waitpid(pid, &status, WNOHANG);
if (status)
<breakage>
then we have to make sure that in case status did not change we actually
return the guest's initialized status variable instead of our own uninitialized.
We fail to do so today, as we proxy everything through an uninitialized status
variable which for me ended up always containing the last error code.
This patch fixes some test cases when building yast2-core in OBS for ARM.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Correct the printing of errnos for syscalls which are handled
via print_syscall_ret_addr (mmap, mmap2, brk, shmat): errnos
are returned as negative returned values at this level, not
via the host 'errno' variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
While debugging some issues with QEMU_STRACE I stumbled over segmentation
faults that were pretty reproducible. Turns out we tried to treat a
normal return value as errno, resulting in an access over array boundaries
for the resolution.
Fix this by allowing failure to resolve invalid errnos into strings.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
QEMU linux user-mode's default log file name is "/tmp/qemu.log". In order to
change the log file name, user need to modify the source code then recompile
QEMU. This patch allow user use "-D logfile" option to specify the log file
name.
Signed-off-by: Chen Wen-Ren <chenwj@iis.sinica.edu.tw>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Gtk tries to read /proc/self/auxv to find its auxv table instead of
taking it from its own program memory space.
However, when running with linux-user, we see the host's auxv which
clearly exposes wrong information. so let's instead expose the guest
memory backed auxv tables via /proc/self/auxv as well.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The boehm gc finds the program's stack starting pointer by
checking /proc/self/stat. Unfortunately, so far it reads
qemu's stack pointer which clearly is wrong.
So let's instead fake the file so the guest program sees the
right address.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
glibc's pthread_attr_getstack tries to find the stack range from
/proc/self/maps. Unfortunately, /proc is usually the host's /proc
which means linux-user guests see qemu's stack there.
Fake the file with a constructed maps entry that exposes the guest's
stack range.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
There are a number of files in /proc that expose host information
to the guest program. This patch adds infrastructure to override
the open() syscall for guest programs to enable us to on the fly
generate guest sensible files.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We create our own AUXV segment on stack and save a pointer to it.
However we don't save the length of it, so any code that wants to
do anything useful with it later on has to walk it again.
Instead, let's remember the length of our AUXV segment. This
simplifies later uses by a lot.
(edited by Riku to apply to qemu HEAD)
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Coverity complained about local variable key which was only partially
initiated. Only key.st_value was set. As this was also the only part
of key which was used in function symfind, the code could be optimized
by directly passing a pointer to orig_addr.
In bsd-user/elfload.c, fix ec822001a2
was missing. This was a simple replacement of > by >= in symfind, so
I fixed it here without creating an additional patch.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
accidently->accidentally
annother->another
choosen->chosen
consideres->considers
decriptor->descriptor
developement->development
paramter->parameter
preceed->precede
preceeding->preceding
priviledge->privilege
propogation->propagation
substraction->subtraction
throught->through
upto->up to
usefull->useful
Fix also grammar in posix-aio-compat.c
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
In an fcntl64 failure path, we were returning directly rather than
simply breaking out of the switch statement. This skips the strace
code for printing the syscall return value, so don't do that.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Fix some stray non-UTF-8 characters used in some ASCII art tables
by converting them to plain ASCII '|' instead.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Convert comment from ISO-8859-1 encoding to UTF-8 to match the rest
of QEMU's source code.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Double semicolons should be single.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
If a malloc() in copy_elf_strings() failed we would call memset()
before the "did malloc fail?" check. Fix this by moving to the
glib alloc/free routines for this memory so we can use g_try_malloc0
rather than having a separate memset(). Spotted by Coverity (see
bug 887883).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Modern distributions place xattr.h in /usr/include/sys, and fold
libattr.so into libc. They also don't have an ENOATTR.
Make configure detect this, and add a qemu-xattr.h file that
directs the #include to the right place.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use target_ulong instead of hard-coded uint32_t.
Remove the disabled printf's that are redundant with -strace.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Don't confuse the load address with the load bias. They're equal
for ET_DYN objects (i.e. ld.so) but different for ET_EXEC objects
(i.e. statically linked).
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For OBS, we're running a full cross-guest inside of a VM. When a build
is done there, we reboot the guest as shutdown mechanism.
Unfortunately, reboot is not implemented in linux-user. So this mechanism
fails, spilling unpretty warnings. This patch implements sys_reboot()
emulation.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
When running openat using qemu-arm, we stumbled over invalid permissions
on the created files. The reason for this is that the mode parameter gets
treates as an O_... flag, which it isn't - it's a permission bitmask.
This patch removes the needless translation of the mode parameter,
rendering permission passing of openat() to work with linux-user.
Reported-by: Dirk Mueller <dmueller@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
abi_(u)long might be different from target_ulong, so don't use tswapl
but introduce a new tswapal
Signed-off-by: Matthias Braun <matze@braunis.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
This allows a more efficient representation for 64-bit hosts.
It should be about the same for 32-bit hosts, as we can still
access the individual pieces of the double.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Fix the "-version" option, which was accidentally broken in commit
fc9c541:
* exit after printing version information rather than proceeding
blithely onward (and likely printing the full usage message)
* correct the cut-n-paste error in the usage message for it
* don't insist on the presence of a following argument for
options which don't take an argument (this was preventing
'qemu-arm -version' from working)
* remove a spurious argc check from the beginning of main() which
meant 'QEMU_VERSION=1 qemu-arm' didn't work.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
The code is unused since 8 years, so remove it.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Those blanks violate the coding conventions, see
scripts/checkpatch.pl.
Blanks missing after colons in the changed lines were added.
This patch does not try to fix tabs, long lines and other
problems in the changed lines, therefore checkpatch.pl reports
many violations.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu-common.h is not a system include file, so it should be included
with "" instead of <>. Otherwise incremental builds might fail
because only local include files are checked for changes.
* linux-user/syscall.c included the file twice.
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
