The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".
Convert interfaces by using no-op size_memop.
After all interfaces are converted, size_memop will be implemented
and the memory_region_dispatch_{read|write} operand "unsigned size"
will be converted into a "MemOp op".
As size_memop is a no-op, this patch does not change any behaviour.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <e70ff5814ac3656974180db6375397c43b0bc8b8.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".
Convert interfaces by using no-op size_memop.
After all interfaces are converted, size_memop will be implemented
and the memory_region_dispatch_{read|write} operand "unsigned size"
will be converted into a "MemOp op".
As size_memop is a no-op, this patch does not change any behaviour.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <ebf1f78029d5ac1de1739a11d679740a87a1f02f.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".
Convert interfaces by using no-op size_memop.
After all interfaces are converted, size_memop will be implemented
and the memory_region_dispatch_{read|write} operand "unsigned size"
will be converted into a "MemOp op".
As size_memop is a no-op, this patch does not change any behaviour.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <21113bae2f54b45176701e0bf595937031368ae6.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".
Convert interfaces by using no-op size_memop.
After all interfaces are converted, size_memop will be implemented
and the memory_region_dispatch_{read|write} operand "unsigned size"
will be converted into a "MemOp op".
As size_memop is a no-op, this patch does not change any behaviour.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <2f41da26201fb9b0339c2b7fde34df864f7f9ea8.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".
Convert interfaces by using no-op size_memop.
After all interfaces are converted, size_memop will be implemented
and the memory_region_dispatch_{read|write} operand "unsigned size"
will be converted into a "MemOp op".
As size_memop is a no-op, this patch does not change any behaviour.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <af407f0a34dc95ef5aaf2c00dffda7c65df23c3a.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".
Introduce no-op size_memop to aid preparatory conversion of
interfaces.
Once interfaces are converted, size_memop will be implemented to
return a MemOp from size in bytes.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <35b8ee74020f67cf40848fb7d5f127cf96c851d6.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Preparation for collapsing the two byte swaps, adjust_endianness and
handle_bswap, along the I/O path.
Target dependant attributes are conditionalized upon NEED_CPU_H.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
An attempt to do an exception-return (branch to one of the magic
addresses) in linux-user mode for M-profile should behave like
a normal branch, because linux-user mode is always going to be
in 'handler' mode. This used to work, but we broke it when we added
support for the M-profile security extension in commit d02a8698d7.
In that commit we allowed even handler-mode calls to magic return
values to be checked for and dealt with by causing an
EXCP_EXCEPTION_EXIT exception to be taken, because this is
needed for the FNC_RETURN return-from-non-secure-function-call
handling. For system mode we added a check in do_v7m_exception_exit()
to make any spurious calls from Handler mode behave correctly, but
forgot that linux-user mode would also be affected.
How an attempted return-from-non-secure-function-call in linux-user
mode should be handled is not clear -- on real hardware it would
result in return to secure code (not to the Linux kernel) which
could then handle the error in any way it chose. For QEMU we take
the simple approach of treating this erroneous return the same way
it would be handled on a CPU without the security extensions --
treat it as a normal branch.
The upshot of all this is that for linux-user mode we should never
do any of the bx_excret magic, so the code change is simple.
This ought to be a weird corner case that only affects broken guest
code (because Linux user processes should never be attempting to do
exception returns or NS function returns), except that the code that
assigns addresses in RAM for the process and stack in our linux-user
code does not attempt to avoid this magic address range, so
legitimate code attempting to return to a trampoline routine on the
stack can fall into this case. This change fixes those programs,
but we should also look at restricting the range of memory we
use for M-profile linux-user guests to the area that would be
real RAM in hardware.
Cc: qemu-stable@nongnu.org
Reported-by: Christophe Lyon <christophe.lyon@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190822131534.16602-1-peter.maydell@linaro.org
Fixes: https://bugs.launchpad.net/qemu/+bug/1840922
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function neon_store_reg32() doesn't free the TCG temp that it
is passed, so the caller must do that. We got this right in most
places but forgot to free the TCG temps in trans_VMOV_64_sp().
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190827121931.26836-1-peter.maydell@linaro.org
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190828165307.18321-10-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190828165307.18321-8-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Afterwise is "wise after the fact", as in "hindsight".
Here we meant "afterwards" (as in "subsequently"). Fix it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190828165307.18321-7-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit a5e0b3311 removed these in favour of querying machine
properties. Remove the extern declarations as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190828165307.18321-6-alex.bennee@linaro.org
Cc: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190711130546.18578-1-alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As explained in commit aff39be0ed:
Both functions, object_initialize() and object_property_add_child()
increase the reference counter of the new object, so one of the
references has to be dropped afterwards to get the reference
counting right. Otherwise the child object will not be properly
cleaned up when the parent gets destroyed.
Thus let's use now object_initialize_child() instead to get the
reference counting here right.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190823143249.8096-7-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As explained in commit aff39be0ed:
Both functions, object_initialize() and object_property_add_child()
increase the reference counter of the new object, so one of the
references has to be dropped afterwards to get the reference
counting right. Otherwise the child object will not be properly
cleaned up when the parent gets destroyed.
Thus let's use now object_initialize_child() instead to get the
reference counting here right.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190823143249.8096-6-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Child properties form the composition tree. All objects need to be
a child of another object. Objects can only be a child of one object.
Respect this with the i.MX SoC, to get a cleaner composition tree.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190823143249.8096-5-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both object_initialize() and qdev_set_parent_bus() increase the
reference counter of the new object, so one of the references has
to be dropped afterwards to get the reference counting right.
In machine model code this refcount leak is not particularly
problematic because (unlike devices) machines will never be
created on demand via QMP, and they are never destroyed.
But in any case let's use the new sysbus_init_child_obj() instead
to get the reference counting here right.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190823143249.8096-4-philmd@redhat.com
[PMM: rewrote commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As explained in commit aff39be0ed:
Both functions, object_initialize() and object_property_add_child()
increase the reference counter of the new object, so one of the
references has to be dropped afterwards to get the reference
counting right. Otherwise the child object will not be properly
cleaned up when the parent gets destroyed.
Thus let's use now object_initialize_child() instead to get the
reference counting here right.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190823143249.8096-3-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit ba1ba5cca introduce the ARM_CPU_TYPE_NAME() macro.
Unify the code base by use it in all places.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190823143249.8096-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The previous simplification got the order of operands to the
subtraction wrong. Since the 64-bit product is the subtrahend,
we must use a 64-bit subtract to properly compute the borrow
from the low-part of the product.
Fixes: 5f8cd06ebc ("target/arm: Simplify SMMLA, SMMLAR, SMMLS, SMMLSR")
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20190829013258.16102-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An IOVA/ASID invalidation is notified to all IOMMU Memory Regions
through smmuv3_inv_notifiers_iova/smmuv3_notify_iova.
When the notification occurs it is possible that some of the
PCIe devices associated to the notified regions do not have a
valid stream table entry. In that case we output a LOG_GUEST_ERROR
message, for example:
invalid sid=<SID> (L1STD span=0)
"smmuv3_notify_iova error decoding the configuration for iommu mr=<MR>
This is unfortunate as the user gets the impression that there
are some translation decoding errors whereas there are not.
This patch adds a new field in SMMUEventInfo that tells whether
the detection of an invalid STE must lead to an error report.
invalid_ste_allowed is set before doing the invalidations and
kept unset on actual translation.
The other configuration decoding error messages are kept since if the
STE is valid then the rest of the config must be correct.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20190822172350.12008-6-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Log a guest error when encountering an invalid STE.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190822172350.12008-5-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
memory_region_iommu_replay_all is not used. Remove it.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-id: 20190822172350.12008-2-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
First up: This is not the way the hardware behaves.
However, it helps resolve real-world problems with short periods being
used under Linux. Commit 4451d3f59f2a ("clocksource/drivers/fttmr010:
Fix set_next_event handler") in Linux fixed the timer driver to
correctly schedule the next event for the Aspeed controller, and in
combination with 5daa8212c08e ("ARM: dts: aspeed: Describe random number
device") Linux will now set a timer with a period as low as 1us.
Configuring a qemu timer with such a short period results in spending
time handling the interrupt in the model rather than executing guest
code, leading to noticeable "sticky" behaviour in the guest.
The behaviour of Linux is correct with respect to the hardware, so we
need to improve our handling under emulation. The approach chosen is to
provide back-pressure information by calculating an acceptable minimum
number of ticks to be set on the model. Under Linux an additional read
is added in the timer configuration path to detect back-pressure, which
will never occur on hardware. However if back-pressure is observed, the
driver alerts the clock event subsystem, which then performs its own
next event dilation via a config option - d1748302f70b ("clockevents:
Make minimum delay adjustments configurable")
A minimum period of 5us was experimentally determined on a Lenovo
T480s, which I've increased to 20us for "safety".
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20190704055150.4899-1-clg@kaod.org
[clg: - changed the computation of min_ticks to be done each time the
timer value is reloaded. It removes the ordering issue of the
timer and scu reset handlers but is slightly slower ]
- introduced TIMER_MIN_NS
- introduced calculate_min_ticks() ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The translation table walk for an ATS instruction can result in
various faults. In general these are just reported back via the
PAR_EL1 fault status fields, but in some cases the architecture
requires that the fault is turned into an exception:
* synchronous stage 2 faults of any kind during AT S1E0* and
AT S1E1* instructions executed from NS EL1 fault to EL2 or EL3
* synchronous external aborts are taken as Data Abort exceptions
(This is documented in the v8A Arm ARM DDI0487A.e D5.2.11 and
G5.13.4.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20190816125802.25877-3-peter.maydell@linaro.org
Currently the only part of an ARMCPRegInfo which is allowed to cause
a CPU exception is the access function, which returns a value indicating
that some flavour of UNDEF should be generated.
For the ATS system instructions, we would like to conditionally
generate exceptions as part of the writefn, because some faults
during the page table walk (like external aborts) should cause
an exception to be raised rather than returning a value.
There are several ways we could do this:
* plumb the GETPC() value from the top level set_cp_reg/get_cp_reg
helper functions through into the readfn and writefn hooks
* add extra readfn_with_ra/writefn_with_ra hooks that take the GETPC()
value
* require the ATS instructions to provide a dummy accessfn,
which serves no purpose except to cause the code generation
to emit TCG ops to sync the CPU state
* add an ARM_CP_ flag to mark the ARMCPRegInfo as possibly
throwing an exception in its read/write hooks, and make the
codegen sync the CPU state before calling the hooks if the
flag is set
This patch opts for the last of these, as it is fairly simple
to implement and doesn't require invasive changes like updating
the readfn/writefn hook function prototype signature.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20190816125802.25877-2-peter.maydell@linaro.org
Make this a static function private to translate.c.
Thus we can use the same idiom between aarch64 and aarch32
without actually sharing function implementations.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20190826151536.6771-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 3cb3663715.
Despite the fact that the text for the call to gen_exception_insn
is identical for aarch64 and aarch32, the implementation inside
gen_exception_insn is totally different.
This fixes exceptions raised from aarch64.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20190826151536.6771-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When 'system_reset' is called, the main loop clear the memory
region cache before the BH has a chance to execute. Later when
the deferred function is called, some assumptions that were
made when scheduling them are no longer true when they actually
execute.
This is what happens using a virtio-blk device (fresh RHEL7.8 install):
$ (sleep 12.3; echo system_reset; sleep 12.3; echo system_reset; sleep 1; echo q) \
| qemu-system-x86_64 -m 4G -smp 8 -boot menu=on \
-device virtio-blk-pci,id=image1,drive=drive_image1 \
-drive file=/var/lib/libvirt/images/rhel78.qcow2,if=none,id=drive_image1,format=qcow2,cache=none \
-device virtio-net-pci,netdev=net0,id=nic0,mac=52:54:00:c4:e7:84 \
-netdev tap,id=net0,script=/bin/true,downscript=/bin/true,vhost=on \
-monitor stdio -serial null -nographic
(qemu) system_reset
(qemu) system_reset
(qemu) qemu-system-x86_64: hw/virtio/virtio.c:225: vring_get_region_caches: Assertion `caches != NULL' failed.
Aborted
(gdb) bt
Thread 1 (Thread 0x7f109c17b680 (LWP 10939)):
#0 0x00005604083296d1 in vring_get_region_caches (vq=0x56040a24bdd0) at hw/virtio/virtio.c:227
#1 0x000056040832972b in vring_avail_flags (vq=0x56040a24bdd0) at hw/virtio/virtio.c:235
#2 0x000056040832d13d in virtio_should_notify (vdev=0x56040a240630, vq=0x56040a24bdd0) at hw/virtio/virtio.c:1648
#3 0x000056040832d1f8 in virtio_notify_irqfd (vdev=0x56040a240630, vq=0x56040a24bdd0) at hw/virtio/virtio.c:1662
#4 0x00005604082d213d in notify_guest_bh (opaque=0x56040a243ec0) at hw/block/dataplane/virtio-blk.c:75
#5 0x000056040883dc35 in aio_bh_call (bh=0x56040a243f10) at util/async.c:90
#6 0x000056040883dccd in aio_bh_poll (ctx=0x560409161980) at util/async.c:118
#7 0x0000560408842af7 in aio_dispatch (ctx=0x560409161980) at util/aio-posix.c:460
#8 0x000056040883e068 in aio_ctx_dispatch (source=0x560409161980, callback=0x0, user_data=0x0) at util/async.c:261
#9 0x00007f10a8fca06d in g_main_context_dispatch () at /lib64/libglib-2.0.so.0
#10 0x0000560408841445 in glib_pollfds_poll () at util/main-loop.c:215
#11 0x00005604088414bf in os_host_main_loop_wait (timeout=0) at util/main-loop.c:238
#12 0x00005604088415c4 in main_loop_wait (nonblocking=0) at util/main-loop.c:514
#13 0x0000560408416b1e in main_loop () at vl.c:1923
#14 0x000056040841e0e8 in main (argc=20, argv=0x7ffc2c3f9c58, envp=0x7ffc2c3f9d00) at vl.c:4578
Fix this by cancelling the BH when the virtio dataplane is stopped.
[This is version of the patch was modified as discussed with Philippe on
the mailing list thread.
--Stefan]
Reported-by: Yihuang Yu <yihyu@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Fixes: https://bugs.launchpad.net/qemu/+bug/1839428
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190816171503.24761-1-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move existing numa global numa_info (renamed as "nodes") into NumaState.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-5-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move existing numa global have_numa_distance into NumaState.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Liu Jingqi <jingqi.liu@intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-4-tao3.xu@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add struct NumaState in MachineState and move existing numa global
nb_numa_nodes(renamed as "num_nodes") into NumaState. And add variable
numa_support into MachineClass to decide which submachines support NUMA.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-3-tao3.xu@intel.com>
[ehabkost: include hw/boards.h again to fix build failures]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In struct arm_boot_info, kernel_filename, initrd_filename and
kernel_cmdline are copied from from MachineState. This patch add
MachineState as a parameter into arm_load_dtb() and move the copy chunk
of kernel_filename, initrd_filename and kernel_cmdline into
arm_load_kernel().
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Liu Jingqi <jingqi.liu@intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-2-tao3.xu@intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Cédric Le Goater <clg@kaod.org>
[ehabkost: include hw/boards.h again to fix build failures]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Commit a5e0b3311 removed these in favour of querying machine
properties. Remove the extern declarations as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190711130546.18578-1-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Like Xu <like.xu@linux.intel.com>
Fixes: a5e0b33119 ("vl.c: Replace smp global variables with smp machine properties")
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Quoting cache mode is not needed, and most tests use unquoted values.
Unify all test to use the same style.
Message-id: 20190827173432.7656-1-nsoffer@redhat.com
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The sanitizers (especially the address sanitizer from Clang) are
sometimes printing out warnings or false positives - this spoils
the output of the iotests, causing some of the tests to fail.
Thus let's skip the automatic iotests during "make check" when the
user configured QEMU with --enable-sanitizers.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190823084203.29734-1-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It is possible to enable only a subset of the block drivers with the
"--block-drv-rw-whitelist" option of the "configure" script. All other
drivers are marked as unusable (or only included as read-only with the
"--block-drv-ro-whitelist" option). If an iotest is now using such a
disabled block driver, it is failing - which is bad, since at least the
tests in the "auto" group should be able to deal with this situation.
Thus let's introduce a "_require_drivers" function that can be used by
the shell tests to check for the availability of certain drivers first,
and marks the test as "not run" if one of the drivers is missing.
This patch mainly targets the test in the "auto" group which should
never fail in such a case, but also improves some of the other tests
along the way. Note that we also assume that the "qcow2" and "file"
drivers are always available - otherwise it does not make sense to
run "make check-block" at all (which only tests with qcow2 by default).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190823133552.11680-1-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Without this argument, qemu will print an angry message about not being
able to connect to a display server if $DISPLAY is not set. For me,
that breaks iotests.supported_formats() because it thus only sees
["Could", "not", "connect"] as the supported formats.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190819201851.24418-2-mreitz@redhat.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
iotest 126 requires backing file support, which flat vmdks cannot offer.
Skip this test for such subformats.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190815153638.4600-8-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The error message for the test case where we have a quorum node for
which no directory name can be generated is different: For
twoGbMaxExtentSparse, it complains that it cannot open the extent file.
For other (sub)formats, it just notes that it cannot determine the
backing file path. Both are fine, but just disable twoGbMaxExtentSparse
for simplicity's sake.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190815153638.4600-7-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
streamOptimized does not support writes that do not span exactly one
cluster. Furthermore, it cannot rewrite already allocated clusters.
As such, many iotests do not work with it. Disable them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190815153638.4600-6-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Compressed writes generally have to write full clusters, not just in
theory but also in practice when it comes to vmdk's streamOptimized
subformat. It currently is just silently broken for writes with
non-zero in-cluster offsets:
$ qemu-img create -f vmdk -o subformat=streamOptimized foo.vmdk 1M
$ qemu-io -c 'write 4k 4k' -c 'read 4k 4k' foo.vmdk
wrote 4096/4096 bytes at offset 4096
4 KiB, 1 ops; 00.01 sec (443.724 KiB/sec and 110.9309 ops/sec)
read failed: Invalid argument
(The technical reason is that vmdk_write_extent() just writes the
incomplete compressed data actually to offset 4k. When reading the
data, vmdk_read_extent() looks at offset 0 and finds the compressed data
size to be 0, because that is what it reads from there. This yields an
error.)
For incomplete writes with zero in-cluster offsets, the error path when
reading the rest of the cluster is a bit different, but the result is
the same:
$ qemu-img create -f vmdk -o subformat=streamOptimized foo.vmdk 1M
$ qemu-io -c 'write 0k 4k' -c 'read 4k 4k' foo.vmdk
wrote 4096/4096 bytes at offset 0
4 KiB, 1 ops; 00.01 sec (362.641 KiB/sec and 90.6603 ops/sec)
read failed: Invalid argument
(Here, vmdk_read_extent() finds the data and then sees that the
uncompressed data is short.)
It is better to reject invalid writes than to make the user believe they
might have succeeded and then fail when trying to read it back.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190815153638.4600-5-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We had a test for a case where relative extent paths did not work, but
unfortunately we just fixed the underlying problem, so it works now.
This patch adds a new test case that still fails.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190815153638.4600-4-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This makes iotest 033 pass with e.g. subformat=monolithicFlat. It also
turns a former error in 059 into success.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190815153638.4600-3-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
fe646693ac changed qemu-img create's output so that it no longer prints
single quotes around parameter values. The subformat and adapter_type
filters in _filter_img_create() have never been adapted to that change.
Fixes: fe646693ac
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190815153638.4600-2-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Using block_resize we can test allocate_first_block() with file
descriptor opened with O_DIRECT, ensuring that it works for any size
larger than 4096 bytes.
Testing smaller sizes is tricky as the result depends on the filesystem
used for testing. For example on NFS any size will work since O_DIRECT
does not require any alignment.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190827010528.8818-3-nsoffer@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When creating an image with preallocation "off" or "falloc", the first
block of the image is typically not allocated. When using Gluster
storage backed by XFS filesystem, reading this block using direct I/O
succeeds regardless of request length, fooling alignment detection.
In this case we fallback to a safe value (4096) instead of the optimal
value (512), which may lead to unneeded data copying when aligning
requests. Allocating the first block avoids the fallback.
Since we allocate the first block even with preallocation=off, we no
longer create images with zero disk size:
$ ./qemu-img create -f raw test.raw 1g
Formatting 'test.raw', fmt=raw size=1073741824
$ ls -lhs test.raw
4.0K -rw-r--r--. 1 nsoffer nsoffer 1.0G Aug 16 23:48 test.raw
And converting the image requires additional cluster:
$ ./qemu-img measure -f raw -O qcow2 test.raw
required size: 458752
fully allocated size: 1074135040
When using format like vmdk with multiple files per image, we allocate
one block per file:
$ ./qemu-img create -f vmdk -o subformat=twoGbMaxExtentFlat test.vmdk 4g
Formatting 'test.vmdk', fmt=vmdk size=4294967296 compat6=off hwversion=undefined subformat=twoGbMaxExtentFlat
$ ls -lhs test*.vmdk
4.0K -rw-r--r--. 1 nsoffer nsoffer 2.0G Aug 27 03:23 test-f001.vmdk
4.0K -rw-r--r--. 1 nsoffer nsoffer 2.0G Aug 27 03:23 test-f002.vmdk
4.0K -rw-r--r--. 1 nsoffer nsoffer 353 Aug 27 03:23 test.vmdk
I did quick performance test for copying disks with qemu-img convert to
new raw target image to Gluster storage with sector size of 512 bytes:
for i in $(seq 10); do
rm -f dst.raw
sleep 10
time ./qemu-img convert -f raw -O raw -t none -T none src.raw dst.raw
done
Here is a table comparing the total time spent:
Type Before(s) After(s) Diff(%)
---------------------------------------
real 530.028 469.123 -11.4
user 17.204 10.768 -37.4
sys 17.881 7.011 -60.7
We can see very clear improvement in CPU usage.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20190827010528.8818-2-nsoffer@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
