Even for jobs that need to be manually completed, management may want
to take care itself of the completion, not requiring the user to issue
a command to terminate the job. In this case we want to avoid that
they poll us continuously, waiting for completion to become available.
Thus, add a new event that signals the phase switch and the availability
of the block-job-complete command.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If an fd is added to an fd set via the command line, and it is not
referenced by another command line option (ie. -drive), then clean
it up after QEMU initialization is complete.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qmp_add_fd() gets an fd that was received over a socket with
SCM_RIGHTS and adds it to an fd set. This patch adds support
that will enable adding an fd that was inherited on the
command line to an fd set.
Note: All of the code added to monitor_fdset_add_fd(), with the
exception of the error path for non-valid fdset-id, is code motion
from qmp_add_fd().
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The first call to add an fd to an fd set was previously not
allowed to choose the fd set ID. The ID was generated as
the first available and ensuing calls could add more fds by
specifying the fd set ID. This change allows users to
choose the fd set ID on the first call.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move the DUMP_FPU and DUMP_CCOP flags for cpu_dump_state() from being
x86-specific flags to being generic ones. This allows us to drop some
TARGET_I386 ifdefs in various places, and means that we can (potentially)
be more consistent across architectures about which monitor commands or
debug abort printouts include FPU register contents and info about
QEMU's condition-code optimisations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* kwolf/for-anthony: (30 commits)
qemu-iotests: add tests for streaming error handling
qemu-iotests: map underscore to dash in QMP argument names
blkdebug: process all set_state rules in the old state
stream: add on-error argument
block: introduce block job error
iostatus: reorganize io error code
iostatus: change is_read to a bool
iostatus: move BlockdevOnError declaration to QAPI
iostatus: rename BlockErrorAction, BlockQMPEventAction
qemu-iotests: add test for pausing a streaming operation
qmp: add block-job-pause and block-job-resume
block: add support for job pause/resume
qmp: add 'busy' member to BlockJobInfo
block: add block_job_query
block: move job APIs to separate files
block: fix documentation of block_job_cancel_sync
qerror/block: introduce QERR_BLOCK_JOB_NOT_ACTIVE
qemu-iotests: add initial tests for live block commit
QAPI: add command for live block commit, 'block-commit'
block: helper function, to find the base image of a chain
...
* qmp/queue/qmp:
block: live snapshot documentation tweaks
input: index_from_key(): drop unused code
qmp: qmp_send_key(): accept key codes in hex
input: qmp_send_key(): simplify
hmp: dump-guest-memory: hardcode protocol argument to "file:"
qmp: dump-guest-memory: don't spin if non-blocking fd would block
qmp: dump-guest-memory: improve schema doc (again)
qapi: convert add_client
monitor: add Error * argument to monitor_get_fd
pci-assign: use monitor_handle_fd_param
qapi: add "unix" to the set of reserved words
qapi: do not protect enum values from namespace pollution
Add qemu-ga-client script
Support settimeout in QEMUMonitorProtocol
Make negotiation optional in QEMUMonitorProtocol
The hassle and compile time overhead of maintaining both 32-bit and 64-bit
capable source isn't worth the tiny performance advantage which is seen on
a minority of configurations. Switch to compiling libhw only once, with
target_phys_addr_t unconditionally typedefed to uint64_t.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The following behaviors are possible:
'report': The behavior is the same as in 1.1. An I/O error,
respectively during a read or a write, will complete the job immediately
with an error code.
'ignore': An I/O error, respectively during a read or a write, will be
ignored. For streaming, the job will complete with an error and the
backing file will be left in place. For mirroring, the sector will be
marked again as dirty and re-examined later.
'stop': The job will be paused and the job iostatus will be set to
failed or nospace, while the VM will keep running. This can only be
specified if the block device has rerror=stop and werror=stop or enospc.
'enospc': Behaves as 'stop' for ENOSPC errors, 'report' for others.
In all cases, even for 'report', the I/O error is reported as a QMP
event BLOCK_JOB_ERROR, with the same arguments as BLOCK_IO_ERROR.
It is possible that while stopping the VM a BLOCK_IO_ERROR event will be
reported and will clobber the event from BLOCK_JOB_ERROR, or vice versa.
This is not really avoidable since stopping the VM completes all pending
I/O requests. In fact, it is already possible now that a series of
BLOCK_IO_ERROR events are reported with rerror=stop, because vm_stop
calls bdrv_drain_all and this can generate further errors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Also fixes a few issues while there:
1. The fd returned by monitor_get_fd() leaks in most error conditions
2. monitor_get_fd() return value is not checked. Best case we get
an error that is not correctly reported, worse case one of the
functions using the fd (with value of -1) will explode
3. A few error conditions aren't reported
4. We now "use up" @fdname always. Before, it was left alone for
invalid @protocol
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
* mst/tags/for_anthony:
vhost: Pass device path to vhost_dev_init()
monitor: Rename+move net_handle_fd_param -> monitor_handle_fd_param
pcie_aer: clear cmask for Advanced Error Interrupt Message Number
pcie: drop version_id field for live migration
qemu: add .exrc
* 'spice.v59' of git://anongit.freedesktop.org/spice/qemu:
Remove #ifdef QXL_COMMAND_FLAG_COMPAT_16BPP
qxl: Add set_client_capabilities() interface to QXLInterface
spice: make number of surfaces runtime-configurable.
configure: print spice-protocol and spice-server versions
qxl: add QXL_IO_MONITORS_CONFIG_ASYNC
qxl: disallow unknown revisions
qxl/update_area_io: guest_bug on invalid parameters
spice: increase the verbosity of spice section in "qemu --help"
spice: adding seamless-migration option to the command line
spice: add 'migrated' flag to spice info
spice migration: add QEVENT_SPICE_MIGRATE_COMPLETED
spice: notify on vm state change only via spice_server_vm_start/stop
spice: notify spice server on vm start/stop
spice: abort on invalid streaming cmdline params
This patch renames+moves the net_handle_fd_param() caller used to
obtain a file descriptor from either qemu_parse_fd() (the normal case)
or from monitor_get_fd() (migration case) into a generically prefixed
monitor_handle_fd_param() to be used by vhost-scsi code.
Also update net/[socket,tap].c consumers to use the new prefix.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert 'sendkey' to use QAPI.
QAPI passes key's index of mapping table to qmp_send_key(),
not keycode. So we use help functions to convert key/code to
index of key_defs, and 'index' will be converted to 'keycode'
inside qmp_send_key().
For qmp, QAPI would check invalid key and raise error.
For hmp, invalid key is checked in hmp_send_key().
'send-key' of QMP doesn't support key in hexadecimal format.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch added two help functions to convert key/code to index of
mapping table, those functions will return Q_KEY_CODE_MAX if the
code/key is invalid.
Patch also moved key_defs[] to input.c, and removed useless KeyDef struct.
Key's index in QKeyCode enmu is same as keycode's index in new key_defs[].
Monitor functions were changed to access key_defs[] directly.
key_defs[] is used in do_send_key(), so export key_defs[]. It will be
changed to static in next patch.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
There are many maps of keycode 0x56 in pc-bios/keymaps/*
pc-bios/keymaps/common:less 0x56
pc-bios/keymaps/common:greater 0x56 shift
pc-bios/keymaps/common:bar 0x56 altgr
pc-bios/keymaps/common:brokenbar 0x56 shift altgr
This patch just renamed '<' to 'less', QAPI might add new
variable by adding a prefix to keyname, '$PREFIX_<' is not
available, '$PREFIX_less' is ok.
For compatibility, convert user inputted '<' to 'less'.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
When migrating, libvirt queries the migration status, and upon migration
completions, it closes the migration src. On the other hand, when
migration is completed, spice transfers data from the src to destination
via the client. This data is required for keeping the spice session
after migration, without suffering from data loss and inconsistencies.
In order to allow this data transfer, we add QEVENT for signaling
libvirt that spice migration has completed, and libvirt needs to wait
for this event before quitting the src process.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
At some point in the past, the OPEN event was changed to be issued from a
bottom half. This creates a small window whereas a data callback registered in
init may be invoked before the OPEN event has been issued.
This is reproducible with:
echo "{'execute': 'qmp_capabilities'}" | qemu-system-x86_64 -M none -qmp stdio
We can fix this for the monitor by moving the parser initialization to init.
The remaining state that is set in OPEN appears harmless.
Reported-by: Daniel Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some variables are only used on !win32, declare
them only when used.
This avoids a warning in mingw32 build:
CC i386-softmmu/monitor.o
/src/qemu/monitor.c: In function 'monitor_fdset_get_fd':
/src/qemu/monitor.c:2575: warning: unused variable 'mon_fd_flags'
/src/qemu/monitor.c:2574: warning: unused variable 'mon_fdset_fd'
/src/qemu/monitor.c:2573: warning: unused variable 'mon_fdset'
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Fd sets are shared by all monitor connections. Fd sets are considered
to be in use while at least one monitor is connected. When the last
monitor disconnects, all fds that are members of an fd set with no
outstanding dup references are closed. This prevents any fd leakage
associated with a client disconnect prior to using a passed fd.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When qemu_open is passed a filename of the "/dev/fdset/nnn"
format (where nnn is the fdset ID), an fd with matching access
mode flags will be searched for within the specified monitor
fd set. If the fd is found, a dup of the fd will be returned
from qemu_open.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds support that enables passing of file descriptors
to the QEMU monitor where they will be stored in specified file
descriptor sets.
A file descriptor set can be used by a client like libvirt to
store file descriptors for the same file. This allows the
client to open a file with different access modes (O_RDWR,
O_WRONLY, O_RDONLY) and add/remove the passed fds to/from an fd
set as needed. This will allow QEMU to (in a later patch in this
series) "open" and "reopen" the same file by dup()ing the fd in
the fd set that corresponds to the file, where the fd has the
matching access mode flag that QEMU requests.
The new QMP commands are:
add-fd: Add a file descriptor to an fd set
remove-fd: Remove a file descriptor from an fd set
query-fdsets: Return information describing all fd sets
Note: These commands are not compatible with the existing getfd
and closefd QMP commands.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qmp/queue/qmp: (48 commits)
target-ppc: add implementation of query-cpu-definitions (v2)
target-i386: add implementation of query-cpu-definitions (v2)
qapi: add query-cpu-definitions command (v2)
compiler: add macro for GCC weak symbols
qapi: add query-machines command
qapi: mark QOM commands stable
qmp: introduce device-list-properties command
qmp: add SUSPEND_DISK event
qmp: qmp-events.txt: add missing doc for the SUSPEND event
qmp: qmp-events.txt: put events in alphabetical order
qmp: emit the WAKEUP event when the guest is put to run
qmp: don't emit the RESET event on wakeup from S3
scripts: qapi-commands.py: qmp-commands.h: include qdict.h
docs: writing-qmp-commands.txt: update error section
error, qerror: drop QDict member
qerror: drop qerror_table and qerror_format()
error, qerror: pass desc string to error calls
error: drop error_get_qobject()/error_set_qobject()
qemu-ga: switch to the new error format on the wire
qmp: switch to the new error format on the wire
...
Emitted when the guest makes a request to enter S4 state.
There are three possible ways of having this event, as described here:
http://lists.gnu.org/archive/html/qemu-devel/2012-07/msg02307.html
I've decided to add a new event and make it indepedent of SHUTDOWN.
This means that the SHUTDOWN event will eventually follow the
SUSPEND_DISK event.
I've choosen this way because of two reasons:
1. Having an indepedent event makes it possible to query for its
existence by using query-events
2. In the future, we may allow the user to change what QEMU should
do as a result of the guest entering S4. So it's a good idea to
keep both events separated
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
IMPORTANT: this BREAKS QMP's compatibility for the error response.
This commit changes QMP's wire protocol to make use of the simpler
error format introduced by previous commits.
There are two important (and mostly incompatible) changes:
1. Almost all error classes have been replaced by GenericError. The
only classes that are still supported for compatibility with
libvirt are: CommandNotFound, DeviceNotActive, KVMMissingCap,
DeviceNotFound and MigrationExpected
2. The 'data' field of the error dictionary is gone
As an example, an error response like:
{ "error": { "class": "DeviceNotRemovable",
"data": { "device": "virtio0" },
"desc": "Device 'virtio0' is not removable" } }
Will now be emitted as:
{ "error": { "class": "GenericError",
"desc": "Device 'virtio0' is not removable" } }
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
In the old QMP days, this code was used to find out QMP commands that
might be calling monitor_printf() down its call chain.
This is almost impossible to happen today, because the qapi converted
commands don't even have a monitor object. Besides, it's been more than
a year since I used this last time.
Let's just drop it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Change XBZRLE cache size in bytes (the size should be a power of 2, it will be
rounded down to the nearest power of 2).
If XBZRLE cache size is too small there will be many cache miss.
New query-migrate-cache-size QMP command and 'info migrate_cache_size' HMP
command to query cache value.
Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: Petter Svard <petters@cs.umu.se>
Signed-off-by: Aidan Shribman <aidan.shribman@sap.com>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The management can query the current migration capabilities using
query-migrate-capabilities QMP command.
The user can use 'info migrate_capabilities' HMP command.
Currently only XBZRLE capability is available.
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Going forward with simpletrace v2 variable size trace records, we cannot
have a generic function to print trace event info and therefore this
interface becomes invalid.
As per Stefan Hajnoczi:
"This command is only available from the human monitor. It's not very
useful because it historically hasn't been able to pretty-print events
or show them in the right order (we use a ringbuffer but it prints
them out from index 0).
Therefore, I don't think we're under any obligation to keep this
command around. No one has complained about it's limitations - I
think this is a sign that no one has used it. I'd be okay with a
patch that removes it."
Ref: http://lists.gnu.org/archive/html/qemu-devel/2012-01/msg01268.html
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Now we have TARGET_PRI*PHYS for printing target_phys_addr_t values,
we can use them in monitor.c rather than having duplicate code
in two arms of a TARGET_PHYS_ADDR_BITS ifdef.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Allow certain event types to be rate limited to avoid flooding
monitor clients. The monitor_protocol_event() method is changed
such that instead of immediately emitting the event to Monitor
instances, it will call a new monitor_protocol_event_queue()
method.
This will check to see if the rate limit for the event has been
exceeded, and if so schedule a timer to wakeup at the end of the
rate limit period. If further events arrive before the timer fires,
the previously queued event will be discarded in favour of the new
event. The event will eventually be emitted when the timer fires.
This logic is applied to RTC_CHANGE, BALLOON_CHANGE & WATCHDOG
events, since the data associated with these events is stateless
* monitor.c: Add support for rate limiting
* monitor.h: Define monitor_global_init for one-time setup tasks
* vl.c: Invoke monitor_global_init
* trace-events: Add hooks for monitor event tracing
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
After setting a balloon target value, applications have to
continually poll 'query-balloon' to determine whether the
guest has reacted to this request. The virtio-balloon backend
knows exactly when the guest has reacted though, and thus it
is possible to emit a JSON event to tell the mgmt application
whenever the guest balloon changes.
This introduces a new 'qemu_balloon_changed()' API which is
to be called by balloon driver backends, whenever they have
a change in balloon value. This takes the 'actual' balloon
value, as would be found in the BalloonInfo struct.
The qemu_balloon_change API emits a JSON monitor event which
looks like:
{"timestamp": {"seconds": 1337162462, "microseconds": 814521},
"event": "BALLOON_CHANGE", "data": {"actual": 944766976}}
* balloon.c, balloon.h: Introduce qemu_balloon_changed() for
emitting balloon change events on the monitor
* hw/virtio-balloon.c: Invoke qemu_balloon_changed() whenever
the guest changes the balloon actual value
* monitor.c, monitor.h: Define QEVENT_BALLOON_CHANGE
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Sometimes it is neccessary for an application to determine
whether a particular QMP event is available, so they can
decide whether to use compatibility code instead. This
introduces a new 'query-events' command to QMP to do just
that
{ "execute": "query-events" }
{"return": [{"name": "WAKEUP"},
{"name": "SUSPEND"},
{"name": "DEVICE_TRAY_MOVED"},
{"name": "BLOCK_JOB_CANCELLED"},
{"name": "BLOCK_JOB_COMPLETED"},
...snip...
{"name": "SHUTDOWN"}]}
* monitor.c: Turn MonitorEvent -> string conversion
into a lookup from a static table of constant strings.
Add impl of qmp_query_events monitor command handler
* qapi-schema.json, qmp-commands.hx: Define contract of
query-events command
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The M type converts from megabytes to bytes. However, the value can be
negative before the conversion, which will lead to a flawed conversion.
For example, this:
(qemu) balloon -1000000000000011
(qemu)
Just "works", but the value passed by the balloon command will be
something else.
This patch fixes this problem by requering a positive value before
converting. There's really no reason to accept a negative value for
the M type.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
It's not checked currently, so something like:
(qemu) balloon -100000000000001111114334234
(qemu)
Will just "work" (in this case the balloon command will get a random
value).
Fix it by checking if strtoul()/strtoull() overflowed.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
"O" is being used by the transaction and qom-set commands to mean "any
QObject", but it really means "do not validate the argument list".
Add a new specifier with the correct meaning.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* stefanha/trivial-patches:
qemu-ga: for w32, fix leaked handle ov.hEvent in ga_channel_write()
ioapic: fix build with DEBUG_IOAPIC
.gitignore: add qemu-bridge-helper and option rom build products
cleanup obsolete typedef
monitor: Remove unused bool field 'qapi' in mon_cmd_t struct
ds1338: Add missing break statement
vnc: Fix packed boolean struct members
Remove type field in ModuleEntry as it's not used
Report QERR_MISSING_PARAMETER when port is missing. Otherwise
QERR_UNDEFINED_ERROR will occur.
rhbz #795652
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some minor code cleanup: the 'qapi' bool field in mon_cmd_t is
unused, and can be removed.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Send qmp events on suspend and wakeup so libvirt
has a chance to track the vm state.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's emitted whenever the tray is moved by the guest or by HMP/QMP
commands.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
With the acceptance of some new APIs to libspice-server.so it
is possible to add support for SPICE to the 'add_client'
monitor command, bringing parity with VNC. Since SPICE can
use TLS or plain connections, the command also gains a new
'tls' parameter to specify whether TLS should be attempted
on the injected client sockets.
This new feature is only enabled if building against a
libspice-server >= 0.10.1
* qmp-commands.hx: Add 'tls' parameter & missing doc for
'skipauth' parameter
* monitor.c: Wire up SPICE for 'add_client' command
* ui/qemu-spice.h, ui/spice-core.c: Add qemu_spice_display_add_client
API to wire up from monitor
[1] http://cgit.freedesktop.org/spice/spice/commit/server/spice.h?id=d55b68b6b44f2499278fa860fb47ff22f5011faahttp://cgit.freedesktop.org/spice/spice/commit/server/spice.h?id=bd07dde530d9504e1cfe7ed5837fc00c26f36716
Changes in v3:
- Added 'optional' flag to new parameters documented
- Added no-op impl of qemu_spice_display_add_client when
SPICE is disabled during build
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add query-block-jobs, which shows the progress of ongoing block device
operations.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add block_job_cancel, which stops an active block streaming operation.
When the operation has been cancelled the new BLOCK_JOB_CANCELLED event
is emitted.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the block_stream command, which starts copy backing file contents
into the image file. Also add the BLOCK_JOB_COMPLETED QMP event which
is emitted when image streaming completes. Later patches add control
over the background copy speed, cancelation, and querying running
streaming operations.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
HMP is now implemented in terms of QMP. The monitor has a bunch of logic to
deal with HMP right now like readline support. Export it from the monitor so
we can consume it in hmp.c.
In short time, hmp.c will take over all of the readline bits.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Drop the qerror_report() call from it and let its callers set the error
themselves. This also allows for dropping the 'ret' variable.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Please, note that the QMP command has a new 'cpu-index' parameter.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Commit 5bc465e4b1 converted only
the HMP part of the system_powerdown command to the QAPI, this
commit completes it by converting the QMP part too.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
stat() can fail for a file name just read with readdir(). Easiest way
to trigger is a dangling symbolic link --- look ma, no race! When it
fails, file_completion() uses sb.st_mode uninitialized. If the
directory bit happens to be set, it appends a "/" to the completed
name.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch would try sort the command list in monitor at runtime. As a result,
command help and help info would show a more friendly sorted command list.
For eg:
(qemu)help
acl_add
acl_policy
acl_remove
acl_reset
acl_show
balloon
block_passwd
...
the command list is sorted.
v3: using qsort function to sort the command list.
Tested-by: Wenyi Gao <wenyi@linux.vnet.ibm.com>
Signed-off-by: Wayne Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Previous commits converted all existing QMP commands to the QAPI,
now each info command does its own QMP call.
Let's then drop all QMP command handling code from do_info().
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Because QMP development originated in the monitor, it has
inherited the monitor's distinction between query- and
non-query commands.
However, previous commits unified both commands and the
distinction is gone. This commit drops the query commands
dispatch table and does some simplifications along the way.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This also fixes a bug with the old version: QMP would invert device id
and vendor id. This would look ok on HMP because it was printing
"device:vendor" instead of "vendor:device".
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Please, note that some of the code supporting memory statistics is
still around (eg. virtio_balloon_receive_stats() and reset_stats()).
Also, the qmp_query_balloon() function is synchronous and thus doesn't
make any use of the (not fully working) monitor's asynchronous command
support (the old non-qapi implementation did).
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
There are three important remarks in relation to the non-qapi command:
1. This commit also fixes the behavior of the 'query-vnc' and 'info vnc'
commands to return an error when qemu is built without VNC support
(ie. --disable-vnc). The non-qapi command would return the OK
response in QMP and no response in HMP
2. The qapi version explicitly marks the fields 'host', 'family',
'service' and 'auth' as optional. Their are not documented as optional
in the non-qapi command doc, but they would not be returned if
vnc support is disabled. The qapi version maintains the same
semantics, but documents those fields correctly
3. The 'clients' field, which is a list, is marked as optional but is
always returned. If there are no clients connected an empty list
is returned. This is not the Right Way to this in the qapi but it's
how the non-qapi command used to work
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This allows a more efficient representation for 64-bit hosts.
It should be about the same for 32-bit hosts, as we can still
access the individual pieces of the double.
Signed-off-by: Richard Henderson <rth@twiddle.net>
RHBZ 737921
Spice client is required to connect to the migration target before/as migration
starts. Since after migration starts, the target qemu is blocked and cannot accept new spice client
we trigger the connection to the target upon client_migrate_info command.
client_migrate_info completion cb will be called after spice client has been
connected to the target (or a timeout). See following patches and spice patches.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows to drop various stubs and move the i8359 into hwlib.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This commit adds support to the BlockDriverState type to keep track
of devices' I/O status.
There are three possible status: BDRV_IOS_OK (no error), BDRV_IOS_ENOSPC
(no space error) and BDRV_IOS_FAILED (any other error). The distinction
between no space and other errors is important because a management
application may want to watch for no space in order to extend the
space assigned to the VM and put it to run again.
Qemu devices supporting the I/O status feature have to enable it
explicitly by calling bdrv_iostatus_enable() _and_ have to be
configured to stop the VM on errors (ie. werror=stop|enospc or
rerror=stop).
In case of multiple errors being triggered in sequence only the first
one is stored. The I/O status is always reset to BDRV_IOS_OK when the
'cont' command is issued.
Next commits will add support to some devices and extend the
query-block/info block commands to return the I/O status information.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Please, note that the RunState type as defined in sysemu.h and its
runstate_as_string() function are being dropped in favor of the
RunState type generated by the QAPI.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Next commit will convert the query-status command to use the
RunState type as generated by the QAPI.
In order to "transparently" replace the current enum by the QAPI
one, we have to make some changes to some enum values.
As the changes are simple renames, I'll do them in one shot. The
changes are:
- Rename the prefix from RSTATE_ to RUN_STATE_
- RUN_STATE_SAVEVM to RUN_STATE_SAVE_VM
- RUN_STATE_IN_MIGRATE to RUN_STATE_INMIGRATE
- RUN_STATE_PANICKED to RUN_STATE_INTERNAL_ERROR
- RUN_STATE_POST_MIGRATE to RUN_STATE_POSTMIGRATE
- RUN_STATE_PRE_LAUNCH to RUN_STATE_PRELAUNCH
- RUN_STATE_PRE_MIGRATE to RUN_STATE_PREMIGRATE
- RUN_STATE_RESTORE to RUN_STATE_RESTORE_VM
- RUN_STATE_PRE_MIGRATE to RUN_STATE_FINISH_MIGRATE
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
A simple example conversion 'info name'. This also adds the new files for
QMP and HMP.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Use the new middle mode within the existing QMP server.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add trace events for handle_qmp_command(), which dispatches qmp
commands, and monitor_protocol_emitter(), which produces the reply to a
qmp command.
Also remove duplicate #include "trace/control.h".
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Commit 31965ae27b reverted a previous
renaming of CONFIG_SIMPLE_TRACE->CONFIG_TRACE_SIMPLE in a couple spots,
leading to trace-file currently being unavailable.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Add a monitor command 'info mtree' to show the memory hierarchy
much like /proc/iomem in Linux.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Today our printf format for the "info status" command is:
VM status: %s
Where the string can be "running", "running (single step mode)" or
"paused".
This commit extends it to:
VM status: %s (%s)
The second string corresponds to the "status" field as returned
by the query-status QMP command and it's only printed if "status"
is not "running" or "paused".
Example:
VM status: paused (shutdown)
PS: libvirt uses "info status" when using HMP, but the new format
should not break it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This new key reports the current VM status to clients. Please, check
the documentation being added in this commit for more details.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We have two states where issuing cont before system_reset can
cause problems: RSTATE_SHUTDOWN (when -no-shutdown is used) and
RSTATE_PANICKED (which only happens with kvm).
This commit fixes that by doing the following when state is
RSTATE_SHUTDOWN or RSTATE_PANICKED:
1. returning an error to the user/client if cont is issued
2. automatically transition to RSTATE_PAUSED during system_reset
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Test against RSTATE_IN_MIGRATE instead.
Please, note that the RSTATE_IN_MIGRATE state is only set when all the
initial VM setup is done, while 'incoming_expected' was set right in
the beginning when parsing command-line options. Shouldn't be a problem
as far as I could check.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Today, when notifying a VM state change with vm_state_notify(),
we pass a VMSTOP macro as the 'reason' argument. This is not ideal
because the VMSTOP macros tell why qemu stopped and not exactly
what the current VM state is.
One example to demonstrate this problem is that vm_start() calls
vm_state_notify() with reason=0, which turns out to be VMSTOP_USER.
This commit fixes that by replacing the VMSTOP macros with a proper
state type called RunState.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch fixes the spacing of the PC output from 'info cpus' for
SPARC.
Signed-off-by: Nathan Kunkee <nkunkee42@hotmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The current interface is generic for this small set of operations, and thus
other backends can easily modify the "trace/control.c" file to add their own
implementation.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Generalize the 'st_print_trace_events' and 'st_change_trace_event_state' into
backend-specific 'trace_print_events' and 'trace_event_set_state' (respectively)
in the "trace/control.h" file.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Provides a more hierarchical view of the variable domain.
Also adds the CONFIG_TRACE_* variables for all backends.
[Stefan added missing 'test' in stap if statement]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Commit c62f6d1 (monitor: fix build breakage with --disable-vnc)
conditionalised some VNC setup code but left an unused variable. Move
the variable into the conditional code to fix the build breakage.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This is the same fix that was recently applied to info mem. Before
this change, info tlb output looked like:
ffffffffffffc000: 000000000fffc000 --------W
ffffffffffffd000: 000000000fffd000 --------W
ffffffffffffe000: 000000000fffe000 --------W
fffffffffffff000: 000000000ffff000 --------W
With this change, it looks like
00000000ffffc000: 000000000fffc000 --------W
00000000ffffd000: 000000000fffd000 --------W
00000000ffffe000: 000000000fffe000 --------W
00000000fffff000: 000000000ffff000 --------W
Signed-off-by: Austin Clements <amdragon@mit.edu>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Previously, "info mem" considered and displayed only the last-level
protection bits for a memory range, which doesn't accurrately
represent the protection of that range. Now it shows the combined
protection.
Signed-off-by: Austin Clements <amdragon@mit.edu>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
"info mem" groups its output into contiguous ranges with identical
protection bits, but previously forgot to print the last range.
Signed-off-by: Austin Clements <amdragon@mit.edu>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Previously, on 32-bit i386, info mem used signed 32-bit int's to store
the page table indexes. As a result, address calculation was done in
32 bits and then incorrectly sign-extended to 64 bits, yielding output
like
ffffffffef000000-ffffffffef031000 0000000000031000 ur-
ffffffffef7bc000-ffffffffef7bd000 0000000000001000 urw
ffffffffef7bd000-ffffffffef7be000 0000000000001000 ur-
This makes these indexes unsigned, which yields correct output
00000000ef000000-00000000ef031000 0000000000031000 ur-
00000000ef7bc000-00000000ef7bd000 0000000000001000 urw
00000000ef7bd000-00000000ef7be000 0000000000001000 ur-
Signed-off-by: Austin Clements <amdragon@mit.edu>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Allow client connections for VNC and socket based character
devices to be passed in over the monitor using SCM_RIGHTS.
One intended usage scenario is to start QEMU with VNC on a
UNIX domain socket. An unprivileged user which cannot access
the UNIX domain socket, can then connect to QEMU's VNC server
by passing an open FD to libvirt, which passes it onto QEMU.
{ "execute": "get_fd", "arguments": { "fdname": "myclient" } }
{ "return": {} }
{ "execute": "add_client", "arguments": { "protocol": "vnc",
"fdname": "myclient",
"skipauth": true } }
{ "return": {} }
In this case 'protocol' can be 'vnc' or 'spice', or the name
of a character device (eg from -chardev id=XXXX)
The 'skipauth' parameter can be used to skip any configured
VNC authentication scheme, which is useful if the mgmt layer
talking to the monitor has already authenticated the client
in another way.
* console.h: Define 'vnc_display_add_client' method
* monitor.c: Implement 'client_add' command
* qemu-char.c, qemu-char.h: Add 'qemu_char_add_client' method
* qerror.c, qerror.h: Add QERR_ADD_CLIENT_FAILED
* qmp-commands.hx: Declare 'client_add' command
* ui/vnc.c: Implement 'vnc_display_add_client' method
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This **CHANGES** the human monitor "nmi" command behavior.
Currently it accepts an CPU argument which, when provided, will send
the NMI to the specified CPU. This feature is of discussable value
though and HMP shouldn't have more features than QMP, so let's use
QMP's instead (it's also simpler).
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
inject-nmi command injects an NMI on all CPUs of guest.
It is only supported for x86 guest currently, it will
returns "Unsupported" error for non-x86 guest.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Read them via KVM_GET_SREGS in kvm_arch_get_registers(),
and display them in "info registers".
Also get CR and PID from the existing KVM_GET_REGS.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Using cpu_physical_memory_read, cpu_physical_memory_write and ldub_phys
improves readability and allows removing some type casts.
lduw_phys and ldl_phys were not used because both require aligned
addresses. Therefore it is not possible to simply replace existing
calls by one of these functions.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
All other type casts in calls of cpu_physical_memory_read are
used by hardware emulations and will be fixed by separate patches.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On ppc machines with hash table MMUs, the special purpose register SDR1
contains both the base address of the encoded size (hashed) page tables.
At present, we interpret the SDR1 value within the address translation
path. But because the encodings of the size for 32-bit and 64-bit are
different this makes for a confusing branch on the MMU type with a bunch
of curly shifts and masks in the middle of the translate path.
This patch cleans things up by moving the interpretation on SDR1 into the
helper function handling the write to the register. This leaves a simple
pre-sanitized base address and mask for the hash table in the CPUState
structure which is easier to work with in the translation path.
This makes the translation path more readable. It addresses the FIXME
comment currently in the mtsdr1 helper, by validating the SDR1 value during
interpretation. Finally it opens the way for emulating a pSeries-style
partition where the hash table used for translation is not mapped into
the guests's RAM.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This was done with:
sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \
$(git grep -l 'qemu_get_clock\>' )
sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \
$(git grep -l 'qemu_new_timer\>' )
after checking that get_clock and new_timer never occur twice
on the same line. There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.
There was exactly one false positive in qemu_run_timers:
- current_time = qemu_get_clock (clock);
+ current_time = qemu_get_clock_ns (clock);
which is of course not in this patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Based on patch by Glauber Costa:
To allow management applications like libvirt to apply CPU affinities to
the VCPU threads, expose their ID via info cpus. This patch provides the
pre-existing and used interface from qemu-kvm.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Allow to tell cpu_x86_inject_mce that it should ignore Action Optional
MCE events when the target VCPU is still processing another one. This
will be used by KVM soon.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Huang Ying <ying.huang@intel.com>
CC: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
CC: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
As this service is used by the human monitor, make sure that errors get
reported to the right channel, and also raise the verbosity.
This requires to move Monitor typedef in qemu-common.h to resolve the
include dependency.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Huang Ying <ying.huang@intel.com>
CC: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
CC: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Define and use dedicated constants for vm_stop reasons, they actually
have nothing to do with the EXCP_* defines used so far. At this chance,
specify more detailed reasons so that VM state change handlers can
evaluate them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
commit 52c18be9e9 introduced a regression in the
change vnc password command that changed the behavior of setting the VNC
password to an empty string from disabling login to disabling authentication.
This commit refactors the code to eliminate this overloaded semantics in
vnc_display_password and instead introduces the vnc_display_disable_login. The
monitor implementation then determines the behavior of an empty or missing
string.
Recently, a set_password command was added that allows both the Spice and VNC
password to be set. This command has not shown up in a release yet so the
behavior is not yet defined.
This patch proposes that an empty password be treated as an empty password with
no special handling. For specifically disabling login, I believe a new command
should be introduced instead of overloading semantics.
I'm not sure how Spice handles this but I would recommend that we have Spice
and VNC have consistent semantics here for the 0.14.0 release.
Reported-by: Neil Wilson <neil@aldur.co.uk>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- Add a proper return to make sure that login is really disabled instead of
relying on the VNC server to treat empty passwords specially
use after free in do_wav_capture() on the error path.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Handle spice client migration, i.e. inform a spice client connected
about the new host and connection parameters, so it can move over the
connection automatically.
The monitor command has a not-yet used protocol argument simliar to
set_password and expire_password commands. This allows to add a simliar
feature to vnc in the future. Daniel Berrange plans to work on this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
strtosz() needs to return a 64 bit type even on 32 bit
architectures. Otherwise qemu-img will fail to create disk
images >= 2GB
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the following test case is injected with mce command, maybe user could not
get the expected result.
DATA
command cpu bank status mcg_status addr misc
(qemu) mce 1 1 0xbd00000000000000 0x05 0x1234 0x8c
Expected Result
panic type: "Fatal Machine check"
That is because each mce command can only inject the given cpu and could not
inject mce interrupt to other cpus. So user will get the following result:
panic type: "Fatal machine check on current CPU"
"broadcast" option is used for injecting dummy data into other cpus. Injecting
mce with this option the expected result could be gotten.
Usage:
Broadcast[on]
command broadcast cpu bank status mcg_status addr misc
(qemu) mce -b 1 1 0xbd00000000000000 0x05 0x1234 0x8c
Broadcast[off]
command cpu bank status mcg_status addr misc
(qemu) mce 1 1 0xbd00000000000000 0x05 0x1234 0x8c
Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Fix usage of wrong variable, spotted by clang:
/src/qemu/monitor.c:2278:36: warning: The left operand of '&' is a garbage value
prot = pde & (PG_USER_MASK | PG_RW_MASK |
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
'info mem' didn't show correct information for PAE mode and
x86_64 long mode.
Fix by implementing the output for missing modes.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
'info tlb' didn't show correct information for PAE mode and
x86_64 long mode.
Implement the missing modes. Also print NX bit for PAE and long modes.
Fix off-by-one error in 32 bit mode mask.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds new set_password and expire_password monitor commands
which allows to change and expire the password for spice and vnc
connections. See the doc update patch chunk for details.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The patch adds a 'query-spice' monitor command which returns
informations about the spice server configuration and also a list of
channel connections.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for connection events to spice. The events are
quite simliar to the vnc events. Unlike vnc spice uses multiple tcp
channels though. qemu will report every single tcp connection (aka
spice channel). If you want track spice sessions only you can filter
for the main channel (channel-type == 1).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The first if/else clause in handler_audit() makes no sense for two
reasons:
1. this function is now called only by QMP code, so testing if
it's a QMP call makes no sense anymore
2. the else clause first asserts that there's no error in the
monitor object, then it tries to free it!
Just drop it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Commit 030db6e89d dropped do_info() usage from QMP and introduced
qmp_call_query_cmd(). However, the new function doesn't emit QMP's
default OK response when the handler doesn't return data.
Fix that by also calling monitor_protocol_emitter() when
ret_data == NULL, so that the default response is emitted.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This command allows QMP clients to execute HMP commands.
Please, check the documentation added to the qmp-commands.hx file
for additional details about the interface and its limitations.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
'f' double is no longer used, and we should be using floating point
variables to store byte sizes. Remove it.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Octet format relies on strtosz which supports K/k, M/m, G/g, T/t
suffixes and unit support for humans, like 1.3G
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There was no warning if a bad trace event name was given to
'trace-event' command, thus the user could think that the command
was successful even if this was not the case.
Print a warning if the user tries to enable a trace event which is not
known.
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Let's be consistent and call it hmp-commands.hx, so that we have
qmp-commands.hx for QMP and hmp-commands.hx for HMP.
Please, note that this commit doesn't touch qemu-monitor.texi. All
texi files have the qemu- prefix and I don't think it's worth
changing that.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Calls a QObject handler and emits the QMP response, also drops
monitor_call_handler() which is now unused.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This avoids handle_user_command() calling monitor_call_handler(),
which is currently shared with QMP.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
That name makes no sense anymore, as dispatch tables have been split,
a better name is handler_is_qobject(), which really communicates
the handler's type.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This function was only needed when QMP and HMP were sharing dispatch
tables, this is no longer true so just drop it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
QMP has its own dispatch table and documentation file
(qmp-commands.hx), we can now drop the following QMP specific info
from qemu-monitor.hx:
o SQMP/EQMP sections
o The qmp_capabilities command
o The query-commands command
However, note that QObject handlers entries are not being removed.
This will only happen when we introduce a proper QMP call interface.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
QMP has its own dispatch tables, we can now drop the following
checks:
o 'info' command: this command doesn't exist in QMP's
dispatch table, the right thing will happen when it's
issued by a client (ie. command not found error)
o monitor_handler_ported(): all QMP handlers are 'ported', no
need to check for that
o monitor_cmd_user_only(): no HMP handler will exist in QMP's
dispatch tables, that's why we have split them after all :-)
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The new table is a copy of HMP's table, containing only QObject
handlers.
In the near future HMP will be making QMP calls and then we will
be able to drop QObject handlers from HMP's table.
From now on, QMP and HMP have different query command dispatch
tables.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Also update QMP functions to use it. The table is generated
from the qmp-commands.hx file.
From now on, QMP and HMP have different command dispatch
tables.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Next commit needs this new function: it will introduce the
the QMP's command dispatch table and qmp_find_cmd() will be
used to search on it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
If I understood it correcty, the is_async_return() logic was only
used to prevent QMP from issuing duplicated success responses
for asynchronous handlers.
However, QMP doesn't use do_info() anymore so this is dead logic
and (hopefully) can be safely dropped.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since its inception, QMP has been using HMP's do_info() function
to run query commands.
This was a bad choice, as it made do_info() more complex and
contributed to couple QMP and HMP.
This commit fixes that by doing the following changes:
1. Introduce qmp_find_query_cmd() and use it to directly lookup
the info_cmds table
2. Introduce qmp_call_query_cmd() so that QMP code is able
to call query handlers without using do_info()
3. Drop do_info() usage (via monitor_find_command("info"))
We need all the three changes in one shot so that we don't break
the calling of query commands in QMP.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Next commit will change how query commands are handled in a
way that the 'cmd' sanity check is also going to be needed
for query commands handling.
Let's move it out of the else body then.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
It's a generic version of monitor_find_command() which searches
the dispatch table passed as an argument.
Future commits will introduce new dispatch tables, so we need
common code to search them.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Expaned '-mon' arg to allow a 'pretty=on' flag. This makes the
monitor pretty print its replies to easy human debugging / reading
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch adds the trace-file command:
trace-file [on|off|flush]
Open, close, or flush the trace file. If no argument is given,
the status of the trace file is displayed.
The trace file is turned on by default but is only written out when the
trace buffer becomes full. The flush operation can be used to force
write out at any time.
Turning off the trace file does not change the state of trace events;
tracing will continue to the trace buffer. When the trace file is off,
use "info trace" to display the contents of the trace buffer in memory.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This commit also contains the trace-file sub-command from the following
commit:
commit 5ce8d1a957afae2c52ad748944ce72848ccf57bd
Author: Prerna Saxena <prerna@linux.vnet.ibm.com>
Date: Wed Aug 4 16:23:54 2010 +0530
trace: Add options to specify trace file name at startup and runtime
This patch adds an optional command line switch '-trace' to specify the
filename to write traces to, when qemu starts.
Eg, If compiled with the 'simple' trace backend,
[temp@system]$ qemu -trace FILENAME IMAGE
Allows the binary traces to be written to FILENAME instead of the option
set at config-time.
Also, this adds monitor sub-command 'set' to trace-file commands to
dynamically change trace log file at runtime.
Eg,
(qemu)trace-file set FILENAME
This allows one to set trace outputs to FILENAME from the default
specified at startup.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds support for dynamically enabling/disabling of trace events.
This is done by internally maintaining each trace event's state, and
permitting logging of data from a trace event only if it is in an
'active' state.
Monitor commands added :
1) info trace-events : to view all available trace events and
their state.
2) trace-event NAME on|off : to enable/disable data logging from a
given trace event.
Eg, trace-event paio_submit off
disables logging of data when
paio_submit is hit.
By default, all trace-events are disabled. One can enable desired trace-events
via the monitor.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
trace: Monitor command 'info trace'
Monitor command 'info trace' to display contents of trace buffer
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
trace: Remove monitor.h dependency from simpletrace
User-mode targets don't have a monitor so the simple trace backend
currently does not build on those targets. This patch abstracts the
monitor printing interface so there is no direct coupling between
simpletrace and the monitor.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This code was originally developed by Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch improves the resilience of the load_vmstate() function, doing
further and better ordered tests.
In load_vmstate(), if there is any error on bdrv_snapshot_goto(), except if the
error is on VM state device, load_vmstate() will return zero and the VM will be
started with major corruption chances.
The current process:
- test if there is any writable device without snapshot support
- if exists return -error
- get the device that saves the VM state, possible return -error but unlikely
because it was tested earlier
- flush I/O
- run bdrv_snapshot_goto() on devices
- if fails, give an warning and goes to the next (not good!)
- if fails on the VM state device, return zero (not good!)
- check if the requested snapshot exists on the device that saves the VM state
and the state is not zero
- if fails return -error
- open the file with the VM state
- if fails return -error
- load the VM state
- if fails return -error
- return zero
New behavior:
- get the device that saves the VM state
- if fails return -error
- check if the requested snapshot exists on the device that saves the VM state
and the state is not zero
- if fails return -error
- test if there is any writable device without snapshot support
- if exists return -error
- test if the devices with snapshot support have the requested snapshot
- if anyone fails, return -error
- flush I/O
- run snapshot_goto() on devices
- if anyone fails, return -error
- open the file with the VM state
- if fails return -error
- load the VM state
- if fails return -error
- return zero
do_loadvm must not call vm_start if any error has occurred in load_vmstate.
Signed-off-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a 'cont' is issued on a VM that's just waiting for an incoming
migration, the VM reboots and boots into the guest, possibly corrupting
its storage since it could be shared with another VM running elsewhere.
Ensure that a VM started with '-incoming' is only run when an incoming
migration successfully completes.
A new qerror, QERR_MIGRATION_EXPECTED, is added to signal that 'cont'
failed due to no incoming migration has been attempted yet.
Reported-by: Laine Stump <laine@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
