This patch adds tcg accessors for 2 SPRs which were missing on P10:
- the TBU40 register is used to write the upper 40 bits of the
timebase register. It is used by kvm to update the timebase when
entering/exiting the guest on P9 and above. The missing definition was
causing erratic decrementer interrupts in a pseries/kvm guest running
in a powernv10/tcg host, typically resulting in hangs.
- the missing DPDES SPR was found through code inspection. It exists
unchanged on P10.
Both existed on previous versions of the processor and a bit of git
archaeology hints that they were added while the P10 model was already
being worked on so they may have simply fallen through the cracks.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220411125900.352028-1-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The phb3/phb4/phb5 root ports inherit from the default PCIE root port
implementation, which requests a LSI interrupt (#INTA). On real
hardware (POWER8/POWER9/POWER10), there is no such LSI. This patch
corrects it so that it matches the hardware.
As a consequence, the device tree previously generated was bogus, as
the root bridge LSI was not properly mapped. On some
implementation (powernv9), it was leading to inconsistent interrupt
controller (xive) data. With this patch, it is now clean.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220408131303.147840-3-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch skips [de]asserting a LSI interrupt if the device doesn't
have any LSI defined. Doing so would trigger an assert in
pci_irq_handler().
The PCIE root port implementation in qemu requests a LSI (INTA), but a
subclass may want to change that behavior since it's a valid
configuration. For example on the POWER8/POWER9/POWER10 systems, the
root bridge doesn't request any LSI.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220408131303.147840-2-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are error paths which do not initialize propname but the trace_exit
label prints it anyway. This initializes the problem string.
Spotted by Coverity CID 1487241.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220406045013.3610172-1-aik@ozlabs.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Resolves the only compiler warning when building a full QEMU under Arch Linux:
Compiling C object libqemu-ppc-softmmu.fa.p/hw_ppc_ppc405_boards.c.o
In file included from /usr/include/glib-2.0/glib.h:114,
from qemu/include/glib-compat.h:32,
from qemu/include/qemu/osdep.h:132,
from ../src/hw/ppc/ppc405_boards.c:25:
../src/hw/ppc/ppc405_boards.c: In function ‘ref405ep_init’:
/usr/include/glib-2.0/glib/glib-autocleanups.h:28:3: warning: ‘filename’ may be used uninitialized in this function [-Wmaybe-uninitialized]
28 | g_free (*pp);
| ^~~~~~~~~~~~
../src/hw/ppc/ppc405_boards.c:265:26: note: ‘filename’ was declared here
265 | g_autofree char *filename;
| ^~~~~~~~
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220405123534.3395-1-shentey@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implement the following PowerISA v3.1 instructions:
xscvqpsqz: VSX Scalar Convert with round to zero Quad-Precision to
Signed Quadword
xscvqpuqz: VSX Scalar Convert with round to zero Quad-Precision to
Unsigned Quadword
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330175932.6995-9-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implement the following PowerISA v3.1 instructions:
xscvsqqp: VSX Scalar Convert with round Signed Quadword to
Quad-Precision
xscvuqqp: VSX Scalar Convert with round Unsigned Quadword to
Quad-Precision format
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330175932.6995-8-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Based on parts_sint_to_float, implements int128_to_float128 to convert a
signed 128-bit value received through an Int128 argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220330175932.6995-5-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Based on parts_uint_to_float, implements uint128_to_float128 to convert
an unsigned 128-bit value received through an Int128 argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330175932.6995-4-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Implement an unsigned right shift for Int128 values and add the same
tests cases of int128_rshift in the unit test.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330175932.6995-3-matheus.ferst@eldorado.org.br>
[danielhb: fixed long lines in test_urshift()]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These are the spapr virtual hypervisor implementation of the nested
KVM API. They only make sense when running with TCG.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220325221113.255834-3-farosas@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
I'm moving this because next patch will add more code under the ifdef
and it will be cleaner if we keep them together.
Also switch the ifdef branches to make it more convenient to add code
under CONFIG_TCG in the next patch.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220325221113.255834-2-farosas@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All devices raising PSI interrupts are now converted to use GPIO lines
and the pnv_psi_irq_set() routines have become useless. Drop them.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220323072846.1780212-5-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use an anonymous output GPIO line to connect the OCC device with the
PSIHB device and raise the appropriate PSI IRQ line depending on the
processor model.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220323072846.1780212-4-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Create an anonymous output GPIO line to connect the LPC device with
the PSIHB device and raise the appropriate PSI IRQ line depending on
the processor model.
A temporary __pnv_psi_irq_set() routine is introduced to handle the
transition. It will be removed when all devices raising PSI interrupts
are converted to use GPIOs.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220323072846.1780212-3-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
On HW, the PSI and FSP interrupt levels are muxed under the same
interrupt number. For coding reasons, an extra IRQ number was
introduced to index register values in an array. It increased the
count of IRQs which do not fit in the PSI IRQ range anymore.
The PSI and FSP interrupts should be modeled with an extra level of
GPIO lines but since QEMU does not support them, simply drop the extra
number to stay within the IRQ range.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220323072846.1780212-2-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Recently the LoPAPR spec got a new 2MB pagesize to support in Dynamic DMA
Windows API (DDW), this adds the new flag.
Linux supports it since
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=38727311871
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20220321071945.918669-1-aik@ozlabs.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is skiboot 7.0 (commit 76b349cf7b40). Built using gcc 11.2.0 and
binutils 2.38.
Changes since the previous version:
Christophe Lombard (15):
npu2: move opal api
pau: introduce support
rainier: detect pau devices
pau: assign bars
pau: create phb
pau: enabling opencapi
pau: translation layer configuration
pau: enable interrupt on error
pau: complete phb ops
pau: hmi scom dump
pau: phy init
pau: link training
pau: update current opal call functions
pau: mmio invalidates
pau: Add support for OpenCAPI Persistent Memory devices.
Cédric Le Goater (4):
xive/p10: Fix xive_special_cache_check when DEBUG=1
xive/p10: Fix mismatch errors when DEBUG=1
interrupts: Do not advertise XICS support on P10
skiboot v6.6.6 release notes
Frederic Barrat (6):
phb4/5: Escalate page-level TCE kills
npu3: Remove GPU support on Swift
phb5: Remove obsolete capp-related properties
xive/p10:: Declare xive2 DT node as an interrupt-controller
skiboot v6.0.24 release notes
opal-api: Drop diagnostics data type symbol for PHB5
Michael Ellerman (3):
external/mambo: Print more info when the kernel is too big
doc: Make it clear all existing platforms use Power9N
docs: Add Swift, Mowgli & Rainier
Nicholas Piggin (12):
external/mambo: Updates for POWER10 configuration for DD2.0
external/mambo: Updates POWER9 SIM_CTRL1 to remove hardware atomic RC
external/mambo: Add POWER10 small-core mode
HBRT: fix clobbered r16 when host services handlers are called
interrupts: add_opal_interrupts avoid NULL dereference on P10 mambo
cpu: cpu_idle_job SMT priority fix
cpu: add debug check in cpu_relax
asm/head: Fix P10 HILE for little endian build
phb4: annotate tbl_pest with endian types
Remove support for POWER8 DD1
phb3: make endian-clean
flash: AST BMC endian fixes
Nick Child (1):
secvar: Free md context on hash error
Ryan Grimm (1):
AWAN simulator support for P10
Vasant Hegde (5):
ci: Bump qemu version
hello_world: Add p10 mambo tests
skiboot v6.7.3 release notes
skiboot v6.8.1 release notes
skiboot v7.0 release notes
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
- make -M virt test exercise -cpu max
- document how binfmt_misc docker works
- clean-up the devel TOC generation
- clean-up check-tcg cross-compile behaviour
- fix byte swap error in xmm gdbstub access
- add float_convd test with reference files
- more reference files for float_convs
- more cleanly handle gdb crashing during check-tcg
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmJgIgsACgkQ+9DbCVqe
KkRs3Qf/WnL4YV3l8jO/wEVbls/57aLPk+ak1GuvXJ+iM9gH8Qz6WZxIJIEhhHlu
ZEixCewahTn8POMMRo4JAr0bRgtfBuh717GerXObiHcS3OuLsGM8rYP2Z1xqKL3L
4pR8VqhyUq/Jyl/6MPN5OZB0AdEPIdI5MuflckCeDcFaowpthLjwHao07hG/FU0s
wQYS7aYTZT33V2Xm6xlePEEMq8YMPCJj00HF3Ljg4eUOmb+C+csFXMQtotsBJRCg
mC/T2U0IFbrQUkkWJqVmRCPwKraQGDMn6POk298siRWE0kV4BmH8mnmN+/Jxhqgl
QfFhQrsBxmPPG5TfQhEmlHfQ5EARLQ==
=8q12
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes-for-7.1-200422-1' of https://github.com/stsquad/qemu into staging
Testing, docs and gdbstub updates:
- make -M virt test exercise -cpu max
- document how binfmt_misc docker works
- clean-up the devel TOC generation
- clean-up check-tcg cross-compile behaviour
- fix byte swap error in xmm gdbstub access
- add float_convd test with reference files
- more reference files for float_convs
- more cleanly handle gdb crashing during check-tcg
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmJgIgsACgkQ+9DbCVqe
# KkRs3Qf/WnL4YV3l8jO/wEVbls/57aLPk+ak1GuvXJ+iM9gH8Qz6WZxIJIEhhHlu
# ZEixCewahTn8POMMRo4JAr0bRgtfBuh717GerXObiHcS3OuLsGM8rYP2Z1xqKL3L
# 4pR8VqhyUq/Jyl/6MPN5OZB0AdEPIdI5MuflckCeDcFaowpthLjwHao07hG/FU0s
# wQYS7aYTZT33V2Xm6xlePEEMq8YMPCJj00HF3Ljg4eUOmb+C+csFXMQtotsBJRCg
# mC/T2U0IFbrQUkkWJqVmRCPwKraQGDMn6POk298siRWE0kV4BmH8mnmN+/Jxhqgl
# QfFhQrsBxmPPG5TfQhEmlHfQ5EARLQ==
# =8q12
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 08:08:59 AM PDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-fixes-for-7.1-200422-1' of https://github.com/stsquad/qemu: (25 commits)
tests/guest-debug: better handle gdb crashes
target/i386: fix byte swap issue with XMM register access
tests/tcg: add missing reference files for float_convs
tests/tcg: add float_convd test
tests/tcg: remove duplicate sha512-sse case
tests/tcg: fix non-static build
tests/docker: remove SKIP_DOCKER_BUILD
tests/tcg: isolate from QEMU's config-host.mak
tests/tcg: invoke Makefile.target directly from QEMU's makefile
tests/tcg: list test targets in Makefile.prereqs
tests/tcg: prepare Makefile.prereqs at configure time
tests/tcg: remove CONFIG_USER_ONLY from config-target.mak
tests/tcg: remove CONFIG_LINUX_USER from config-target.mak
tests/tcg: add compiler test variables when using containers
tests/docker: do not duplicate rules for hexagon-cross
tests/docker: simplify docker-TEST@IMAGE targets
tests/docker: remove unnecessary filtering of $(DOCKER_IMAGES)
tests/docker: inline variable definitions or move close to use
tests/docker: remove unnecessary default definitions
tests/docker: remove dead variable
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Some changes for qcow2's refcount repair algorithm to make it work for
qcow2 images stored on block devices
- Skip test cases that require zstd when support for it is missing
- Some refactoring in the iotests' meson.build
-----BEGIN PGP SIGNATURE-----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=BF0c
-----END PGP SIGNATURE-----
Merge tag 'pull-block-2022-04-20' of https://gitlab.com/hreitz/qemu into staging
Block patches:
- Some changes for qcow2's refcount repair algorithm to make it work for
qcow2 images stored on block devices
- Skip test cases that require zstd when support for it is missing
- Some refactoring in the iotests' meson.build
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEy2LXoO44KeRfAE00ofpA0JgBnN8FAmJf/asSHGhyZWl0ekBy
# ZWRoYXQuY29tAAoJEKH6QNCYAZzfYXUQAKQv5qKQBjU4MTwlS8A4h6B6OJgC1Sik
# 9BB7LO/QFjuuF4vNKpcUlf6i0epxPP8B5pmCjaAolMh6u6wZwL7hHq+SOYXvejTo
# vINW+r097U0qYPkSV+cS6tbW92rYJDD7VxF+34udiWXGjozsBTw/k9DfJaa9Ht66
# 2dw3AxUa4lxN1/ejFzDLx3DNaff+HctLhgVpHeBb0eN2zr2Ug5+ZFgMoiWwU6r6J
# EzTORLAzATerlQVYUkhh4Y/UdVLLw1SzTWOQv5b/NqvaLfKmYsQobSfjC2ajO8XJ
# P2REigcOAij5uWVRf4EY7xoqmADP8pXxuOTzw0hyGNLOLNcXoFbfW45WSPoY+YgH
# EH1TtC4vMsg/MlO/A3PJr9v+SNqxz32cul3MVrY3PuG4Dzz0riy9GhtFUU37igbj
# mR6pP3nSa/f2X4+9B6/UrPjLzusRvc8bvzYqVEnSLABav11npphkYaR9QT1fQUVD
# Zw26igXtmLKUcfop/EqShbhblk0ZLYDTj/Lx7X+thC9OCrK1QgF6qAsIUqiS1iHz
# vwdktRTCofo4ZIT/OCz5QeriJqDz0B7VJ8/4i/uvm2eq8BUsn2mJuyAGD2XtaONV
# rmASrV9VbajdxX5VptjKOOHG6aHtqQlKbyBFog8I4nqVFdjdSMalb++gBMCrPu1A
# 1iZPsOOyz/8+
# =BF0c
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 05:33:47 AM PDT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* tag 'pull-block-2022-04-20' of https://gitlab.com/hreitz/qemu:
qcow2: Add errp to rebuild_refcount_structure()
iotests/108: Test new refcount rebuild algorithm
qcow2: Improve refcount structure rebuilding
iotests/303: Check for zstd support
iotests/065: Check for zstd support
iotests.py: Add supports_qcow2_zstd_compression()
tests/qemu-iotests: Move the bash and sanitizer checks to meson.build
tests/qemu-iotests/meson.build: Improve the indentation
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are a number of GDB's on various distros which fail fairly hard
when attempting to talk to a cross-arch guest. The previous attempt to
catch this was incorrect as the shell will deliver signals as 128+n.
Fix the detection and while we are it improve the logging we dump into
the test output.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Gautam Agrawal <gautamnagrawal@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-26-alex.bennee@linaro.org>
During the conversion to the gdb_get_reg128 helpers the high and low
parts of the XMM register where inadvertently swapped. This causes
reads of the register to report the incorrect value to gdb.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/971
Fixes: b7b8756a9c (target/i386: use gdb_get_reg helpers)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: qemu-stable@nongnu.org
Message-Id: <20220419091020.3008144-25-alex.bennee@linaro.org>
We might as well include a reference file for i386/x86_64. I was going
to include s390x as well but it's broken hence I raised:
https://gitlab.com/qemu-project/qemu/-/issues/979.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220419091020.3008144-24-alex.bennee@linaro.org>
This is a simple transliteration of the float_convs test but this time
working with doubles. I'm used it to test the handling of vector
registers in gdbstub but wasn't able to find a non-ugly way to
automate it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-23-alex.bennee@linaro.org>
We already generate the sha512-sse case in the i386 makefile which
works for both i386 and x86_64.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: f8a4c6d728 ("tests/tcg: add vectorised sha512 versions")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-22-alex.bennee@linaro.org>
If linking with -static fails at configure time, -static should not be used
at build time either. Do not include BUILD_STATIC in $config_target_mak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-18-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-21-alex.bennee@linaro.org>
It is now unused.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-17-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-20-alex.bennee@linaro.org>
Do not include variables for the QEMU's own compiler, as they
are not necessarily related to the cross compiler used for tests/tcg.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-16-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-19-alex.bennee@linaro.org>
Build the "docker.py cc" invocation directly in tests/tcg/configure.sh, and
remove the Makefile.qemu wrapper around Makefile.target. The config-*.mak
files now include the actual variables used when building the tests, rather
than the CROSS_* variables that Makefile.qemu used to "translate".
This is a first step towards generalizing the cross-compilation infrastructure
so that it can be used for firmware as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-15-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-18-alex.bennee@linaro.org>
Omit the rules altogether for targets that do not have a compiler.
Makefile.qemu now is only invoked if the tests are actually built/run.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-14-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-17-alex.bennee@linaro.org>
List the dependencies of the build-tcg-tests-* and run-tcg-tests-*
targets in a Makefile fragment, without going through Makefile.prereqs's
"parsing" of config-*.mak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-13-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-16-alex.bennee@linaro.org>
Just check the target name instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-12-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-15-alex.bennee@linaro.org>
Just check the target name instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220401141326.1244422-11-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-14-alex.bennee@linaro.org>
Even for container-based cross compilation use $(CROSS_CC_HAS_*) variables.
This makes the TCG test makefiles oblivious of whether the compiler is
invoked through a container or not.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220401141326.1244422-10-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-13-alex.bennee@linaro.org>
The commands for docker-image-debian-hexagon-cross are the same as those
in debian-toolchain-run, just with a nonstandard path to build-toolchain.sh.
Reuse the definition by renaming the debian-hexagon-cross.docker.d directory.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-9-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-12-alex.bennee@linaro.org>
No need to go through the shell when we already have the test and images at
the point where the targets are declared.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-8-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-11-alex.bennee@linaro.org>
Now that DOCKER_IMAGES is only defined after DOCKER_VIRTUAL_IMAGES is
complete, there is no need to re-filter DOCKER_IMAGES against it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-7-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-10-alex.bennee@linaro.org>
Variables that are defined with ":=" are handled imperatively, so moving
them closer to the first use ensures that all the assignments prior to
the first use are taken into account.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-6-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-9-alex.bennee@linaro.org>
The definition of DOCKER_IMAGES and DOCKER_TESTS copes already with an
empty value of $(IMAGES) and $(TESTS), no need to force them to "%" if
undefined.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-5-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-8-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220401141326.1244422-4-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-7-alex.bennee@linaro.org>
debian-powerpc-user-cross was the only linux-user powered cross builder
and it was removed in commit 80394ccf21 ("tests/docker: remove
debian-powerpc-user-cross", 2019-09-26). Remove all the infrastructure
around it since it is now unused.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220401141326.1244422-2-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-5-alex.bennee@linaro.org>
This was confusing and in the case of qtest was hiding the details of
the qgraph sub-document in the qtest pages.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-4-alex.bennee@linaro.org>
We document some of this on the wiki but lets move it into our
official developer notes documentation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-3-alex.bennee@linaro.org>
The Fedora 29 kernel is quite old and importantly fails when running
in LPA2 scenarios. As it's not really exercising much of the CPU space
replace it with a custom 5.16.12 kernel with all the architecture
options turned on. There is a minimal buildroot initramfs included in
the kernel which has a few tools for stress testing the memory
subsystem. The userspace also targets the Neoverse N1 processor so
would fail with a v8.0 cpu like cortex-a53.
While we are at it move the test into its own file so it can have an
assigned maintainer.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-2-alex.bennee@linaro.org>
