Reported by Coverity as CID 1490142. Since the size is constant and the
lifetime is the same as the StatsDescriptors struct, embed the struct
directly instead of using a separate allocation.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following scenario can happen if QEMU sets more RESET flags while
the KVM_RESET_DIRTY_RINGS ioctl is ongoing on another host CPU:
CPU0 CPU1 CPU2
------------------------ ------------------ ------------------------
fill gfn0
store-rel flags for gfn0
fill gfn1
store-rel flags for gfn1
load-acq flags for gfn0
set RESET for gfn0
load-acq flags for gfn1
set RESET for gfn1
do ioctl! ----------->
ioctl(RESET_RINGS)
fill gfn2
store-rel flags for gfn2
load-acq flags for gfn2
set RESET for gfn2
process gfn0
process gfn1
process gfn2
do ioctl!
etc.
The three load-acquire in CPU0 synchronize with the three store-release
in CPU2, but CPU0 and CPU1 are only synchronized up to gfn1 and CPU1
may miss gfn2's fields other than flags.
The kernel must be able to cope with invalid values of the fields, and
userspace *will* invoke the ioctl once more. However, once the RESET flag
is cleared on gfn2, it is lost forever, therefore in the above scenario
CPU1 must read the correct value of gfn2's fields.
Therefore RESET must be set with a store-release, that will synchronize
with KVM's load-acquire in CPU1.
Cc: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cache the translation from guest to host address, so we may
use direct loads when we hit on the primary translation page.
Look up the second translation page only once, during translation.
This obviates another lookup of the second page within tb_gen_code
after translation.
Fixes a bug in that plugin_insn_append should be passed the bytes
in the original memory order, not bswapped by pieces.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass these along to translator_loop -- pc may be used instead
of tb->pc, and host_pc is currently unused. Adjust all targets
at one time.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It was non-obvious to me why we can raise an exception in
the middle of a comparison function, but it works.
While nearby, use TARGET_PAGE_ALIGN instead of open-coding.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Simplify the implementation of get_page_addr_code_hostp
by reusing the existing probe_access infrastructure.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The base qemu_ram_addr_from_host function is already in
softmmu/physmem.c; move the nofail version to be adjacent.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The function is not used outside of cpu-exec.c. Move it and
its subroutines up in the file, before the first use.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The mmap_lock is held around tb_gen_code. While the comment
is correct that the lock is dropped when tb_gen_code runs out
of memory, the lock is *not* dropped when an exception is
raised reading code for translation.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The current implementation is a no-op, simply returning addr.
This is incorrect, because we ought to be checking the page
permissions for execution.
Make get_page_addr_code inline for both implementations.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The KVM_DIRTY_GFN_F_DIRTY flag ensures that the entry is valid. If
the read of the fields are not ordered after the read of the flag,
QEMU might see stale values.
Cc: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-M none creates a guest without a vCPU, causing the following error:
$ ./qemu-system-x86_64 -qmp stdio -M none -accel kvm
{execute:qmp_capabilities}
{"return": {}}
{execute: query-stats-schemas}
Segmentation fault (core dumped)
Fix it by not querying the vCPU stats if first_cpu is NULL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
aarch64 stores MTE tags in target_date, and they should be reset by
MADV_DONTNEED.
Signed-off-by: Vitaly Buka <vitalybuka@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220711220028.2467290-1-vitalybuka@google.com>
[lv: fix code style issues]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The function icount_prepare_for_run() is called with the iothread
unlocked, but it can call icount_notify_aio_contexts() which will
run qemu timer handlers. Those are supposed to be run only with
the iothread lock held, so take the lock while we do that.
Since icount mode runs everything on a single thread anyway,
not holding the lock is likely mostly not going to introduce
races, but it can cause us to trip over assertions that we
do hold the lock, such as the one reported in issue 1130.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1130
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-id: 20220801164527.3134765-1-peter.maydell@linaro.org
perror() is designed to append the decoded errno value to a
string. This, however, only makes sense if we called something that
actually sets errno prior to that.
For the callers that check for split irqchip support that is not the
case, and we end up with confusing error messages that end in
"success". Use error_report() instead.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20220728142446.438177-1-cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity complains that there is a codepath in the query_stats()
function where it can leak the memory pointed to by stats_list. This
can only happen if the caller passes something other than
STATS_TARGET_VM or STATS_TARGET_VCPU as the 'target', which no
callsite does. Enforce this assumption using g_assert_not_reached(),
so that if we have a future bug we hit the assert rather than
silently leaking memory.
Resolves: Coverity CID 1490140
Fixes: cc01a3f4ca ("kvm: Support for querying fd-based stats")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220719134853.327059-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Setup a negative feedback system when vCPU thread
handling KVM_EXIT_DIRTY_RING_FULL exit by introducing
throttle_us_per_full field in struct CPUState. Sleep
throttle_us_per_full microseconds to throttle vCPU
if dirtylimit is in service.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <977e808e03a1cef5151cae75984658b6821be618.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introduce kvm_dirty_ring_size util function to help calculate
dirty ring ful time.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <f9ce1f550bfc0e3a1f711e17b1dbc8f701700e56.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add a non-required argument 'CPUState' to kvm_dirty_ring_reap so
that it can cover single vcpu dirty-ring-reaping scenario.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <c32001242875e83b0d9f78f396fe2dcd380ba9e8.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The next version of Linux will introduce boolean statistics, which
can only have 0 or 1 values. Convert them to the new QAPI fields
added in the previous commit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The documentation for PROT_MTE says that it cannot be cleared
by mprotect. Further, the implementation of the VM_ARCH_CLEAR bit,
contains PROT_BTI confiming that bit should be cleared.
Introduce PAGE_TARGET_STICKY to allow target/arch/cpu.h to control
which bits may be reset during page_set_flags. This is sort of the
opposite of VM_ARCH_CLEAR, but works better with qemu's PAGE_* bits
that are separate from PROT_* bits.
Reported-by: Vitaly Buka <vitalybuka@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220711031420.17820-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* fix cross compilation CFLAGS and compiler choice
* do not specify -bios option for tests/vm
* miscellaneous fixes
* preparation for pre-install tree in the build directory (Akihiko)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLNbVcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO1KggArZDxqEOyTCvsu2H1Bf7j2J4Mfx2k
+8FiDNpdfnmpQIc8KnQHZN7QKodXhaPwShoK6NZPYeAbg62n5/RUlF+fj2DbdCN0
udBqt9V5dmjF2S+vb2++pWSpEUpqH1yAVYX3t0MvQDkfscADYYqYndHkYqVP34Sy
sIIkDGdFODQqHCPDmNNFWFHt8X5Zu8t5j53NjPebdryZBDiA4DgFnorTw0sTPV1H
XeS2M06C1lkGyWrdy7eaF9IL3tmlCsuc6xiA0RAhzJiWgHe1LQZOUPMfR+GKuidI
E9Cz05iGyOlH+CNYgdukqT8BdJtcjWZwDgYWVxVIswv461h/asoENUIx1g==
=Nyzq
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* fuzzing fixes (Alexander)
* fix cross compilation CFLAGS and compiler choice
* do not specify -bios option for tests/vm
* miscellaneous fixes
* preparation for pre-install tree in the build directory (Akihiko)
# gpg: Signature made Tue 12 Jul 2022 13:47:19 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
meson: place default firmware path under .../share
qga: Relocate a path emitted in the help text
build: Do not depend on pc-bios for config-host.mak
accel: kvm: Fix memory leak in find_stats_descriptors
audio/dbus: fix building
fuzz: only use generic-fuzz targets on oss-fuzz
build: improve -fsanitize-coverage-allowlist check
build: try both native and cross compilers
configure: pass whole target name to probe_target_compiler
tests/tcg: compile system emulation tests as freestanding
configure: write EXTRA_CFLAGS for all sub-Makefiles
configure: allow more host/target combos to use the host compiler
configure, pc-bios/vof: pass cross CFLAGS correctly
configure, pc-bios/s390-ccw: pass cross CFLAGS correctly
configure, pc-bios/optionrom: pass cross CFLAGS correctly
pc-bios/optionrom: use -m16 unconditionally
scsi/lsi53c895a: fix use-after-free in lsi_do_msgout (CVE-2022-0216)
tests/vm: do not specify -bios option
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# pc-bios/s390-ccw/netboot.mak
If low-address-protection is active, unaligned stores to non-protected
parts of lowcore lead to protection exceptions. The reason is that in
such cases tlb_fill() call in store_helper_unaligned() covers
[0, addr + size) range, which contains the protected portion of
lowcore. This range is too large.
The most straightforward fix would be to make sure we stay within the
original [addr, addr + size) range. However, if an unaligned access
affects a single page, we don't need to call tlb_fill() in
store_helper_unaligned() at all, since it would be identical to
the previous tlb_fill() call in store_helper(), and therefore a no-op.
If an unaligned access covers multiple pages, this situation does not
occur.
Therefore simply skip TLB handling in store_helper_unaligned() if we
are dealing with a single page.
Fixes: 2bcf018340 ("s390x/tcg: low-address protection support")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220711185640.3558813-2-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function doesn't release descriptors in one error path,
result in memory leak. Call g_free() to release it.
Fixes: cc01a3f4ca ("kvm: Support for querying fd-based stats")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Message-Id: <20220624063159.57411-1-linmq006@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need to fetch the name of the current accelerator in flexible error
messages more going forward. Let's create a helper that gives it to us
without casting in the target code.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220620192242.70573-1-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reorg TCG AccelOpsClass initialization to emphasis icount
mode share more code with single-threaded TCG.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323171751.78612-7-philippe.mathieu.daude@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow retrieving only a subset of statistics. This can be useful
for example in order to plot a subset of the statistics many times
a second: KVM publishes ~40 statistics for each vCPU on x86; retrieving
and serializing all of them would be useless.
Another use will be in HMP in the following patch; implementing the
filter in the backend is easy enough that it was deemed okay to make
this a public interface.
Example:
{ "execute": "query-stats",
"arguments": {
"target": "vcpu",
"vcpus": [ "/machine/unattached/device[2]",
"/machine/unattached/device[4]" ],
"providers": [
{ "provider": "kvm",
"names": [ "l1d_flush", "exits" ] } } }
{ "return": {
"vcpus": [
{ "path": "/machine/unattached/device[2]"
"providers": [
{ "provider": "kvm",
"stats": [ { "name": "l1d_flush", "value": 41213 },
{ "name": "exits", "value": 74291 } ] } ] },
{ "path": "/machine/unattached/device[4]"
"providers": [
{ "provider": "kvm",
"stats": [ { "name": "l1d_flush", "value": 16132 },
{ "name": "exits", "value": 57922 } ] } ] } ] } }
Extracted from a patch by Mark Kanda.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow retrieving the statistics from a specific provider only.
This can be used in the future by HMP commands such as "info
sync-profile" or "info profile". The next patch also adds
filter-by-provider capabilities to the HMP equivalent of
query-stats, "info stats".
Example:
{ "execute": "query-stats",
"arguments": {
"target": "vm",
"providers": [
{ "provider": "kvm" } ] } }
The QAPI is a bit more verbose than just a list of StatsProvider,
so that it can be subsequently extended with filtering of statistics
by name.
If a provider is specified more than once in the filter, each request
will be included separately in the output.
Extracted from a patch by Mark Kanda.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a simple filtering of statistics, that allows to retrieve
statistics for a subset of the guest vCPUs. This will be used for
example by the HMP monitor, in order to retrieve the statistics
for the currently selected CPU.
Example:
{ "execute": "query-stats",
"arguments": {
"target": "vcpu",
"vcpus": [ "/machine/unattached/device[2]",
"/machine/unattached/device[4]" ] } }
Extracted from a patch by Mark Kanda.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for querying fd-based KVM stats - as introduced by Linux kernel
commit:
cb082bfab59a ("KVM: stats: Add fd-based API to read binary stats data")
This allows the user to analyze the behavior of the VM without access
to debugfs.
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
dump_opcount_info() is a one-line wrapper around tcg_dump_op_count()
which is also exported. So use the latter directly.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-10-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Commit 3a841ab53f 'qapi: introduce
x-query-jit QMP command' basically moved the only function using
dump_drift_info() to cpu-exec.c. Therefore, dump_drift_info() doesn't
need to be exported any longer.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220520180109.8224-9-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We have about 30 instances of the typo/variant spelling 'writeable',
and over 500 of the more common 'writable'. Standardize on the
latter.
Change produced with:
sed -i -e 's/\([Ww][Rr][Ii][Tt]\)[Ee]\([Aa][Bb][Ll][Ee]\)/\1\2/g' $(git grep -il writeable)
and then hand-undoing the instance in linux-headers/linux/kvm.h.
Most of these changes are in comments or documentation; the
exceptions are:
* a local variable in accel/hvf/hvf-accel-ops.c
* a local variable in accel/kvm/kvm-all.c
* the PMCR_WRITABLE_MASK macro in target/arm/internals.h
* the EPT_VIOLATION_GPA_WRITABLE macro in target/i386/hvf/vmcs.h
(which is never used anywhere)
* the AR_TYPE_WRITABLE_MASK macro in target/i386/hvf/vmx.h
(which is never used anywhere)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 20220505095015.2714666-1-peter.maydell@linaro.org
This patch decouples checkpoints and async events.
It was a tricky part of replay implementation. Now it becomes
much simpler and easier to maintain.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <165364837856.688121.8785039478408995979.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
Coverity reports out-of-bound accesses within cputlb.c.
This should be a false positive due to how the index is
decoded from MemOpIdx. To be fair, nothing is checking
the correct bounds during encoding either.
Assert index in range before use, both to catch user errors
and to pacify static analysis.
Fixes: Coverity CID 1487120, 1487127, 1487170, 1487196, 1487215, 1487238
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220401170813.318609-1-richard.henderson@linaro.org>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
The last use of this macro was removed in f3e182b100
("accel/tcg: Push trace info building into atomic_common.c.inc")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This header only defines the tcg_allowed variable and the tcg_enabled()
function - which are not required in many files that include this
header. Drop the #include statement there.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220315144107.1012530-1-thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses flush output immediately before or after qemu_log_unlock.
Instead of a separate call, move the flush into qemu_log_unlock.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-20-richard.henderson@linaro.org>
Inside log_cpu_state, we perform qemu_log_trylock/unlock, which need
not be done if we have already performed the lock beforehand.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-15-richard.henderson@linaro.org>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
Inside qemu_log, we perform qemu_log_trylock/unlock, which need
not be done if we have already performed the lock beforehand.
Always check the result of qemu_log_trylock -- only checking
qemu_loglevel_mask races with the acquisition of the lock on
the logfile.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-10-richard.henderson@linaro.org>
This function can fail, which makes it more like ftrylockfile
or pthread_mutex_trylock than flockfile or pthread_mutex_lock,
so rename it.
To closer match the other trylock functions, release rcu_read_lock
along the failure path, so that qemu_log_unlock need not be called
on failure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-8-richard.henderson@linaro.org>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
In the conversion to cpu_ld_*_mmu, the retaddr parameter
was corrupted in the one case of cpu_ldq_be_mmu.
Fixes: f83bcecb1 ("accel/tcg: Add cpu_{ld,st}*_mmu interfaces")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/902
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220315002506.152030-1-richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We invoke the kvm_irqchip_commit_routes() for each addition to MSI route
table, which is not efficient if we are adding lots of routes in some cases.
This patch lets callers invoke the kvm_irqchip_commit_routes(), so the
callers can decide how to optimize.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg00967.html
Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20220222141116.2091-3-longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220305233415.64627-2-philippe.mathieu.daude@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-18-f4bug@amsat.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-17-f4bug@amsat.org>
Add cpus_are_resettable() to AccelOps, and implement it for the
KVM accelerator.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-12-f4bug@amsat.org>
Add cpu_thread_is_idle() to AccelOps, and implement it for the
KVM / WHPX accelerators.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-11-f4bug@amsat.org>
Mirror "sysemu/kvm.h" #ifdef'ry to define CONFIG_HAX_IS_POSSIBLE,
expose hax_allowed to hax_enabled() macro.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-9-f4bug@amsat.org>
Now than we only build this stub with system emulation,
remove the user-mode #ifdef'ry.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-8-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-3-f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220207075426.81934-2-f4bug@amsat.org>
In some cases, cpu->exit_request can be false after handling the
interrupt, leading to another TB being executed instead of returning
to the main loop.
Fix this by returning true unconditionally when in single-step mode.
Fixes: ba3c35d9c4 ("tcg/cpu-exec: precise single-stepping after an interrupt")
Signed-off-by: Luc Michel <lmichel@kalray.eu>
Message-Id: <20220214132656.11397-1-lmichel@kalray.eu>
[rth: Unlock iothread mutex; simplify indentation]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The qemu_icache_linesize, qemu_icache_linesize_log,
qemu_dcache_linesize, and qemu_dcache_linesize_log variables are not
used in many files. Move them out of osdep.h to a new
qemu/cacheinfo.h, and document them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-5-peter.maydell@linaro.org
Fix host signal handling for sparc64-linux.
Speedups for jump cache and work list probing.
Fix for exception replays.
Raise guest SIGBUS for user-only misaligned accesses.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmIFu3QdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9tHwf+KFk9Pa9M+vhnHTZJ
ZvIRs9BaSzoDYqxLlHSKmXN3w3G5PbIcbHVHXTty2o28bT0jk05T9zQn3TzMfcbl
O+Yx8rygUJmbzlEQ+GaSI69pppFj8ahlS/ylfwd5MABZun2mawexEU9sqXqGCKR9
kJY8IpkZ6vqEDONcS1ZMQ+HFsNvw6LYBd567SY8g9ZsyPLWtQSqwdcuPqAJDFWCv
zNe6b07IRoFVOsbtQix9Dl/ntMxk5jto+UvdEVuW2FJOeRZJRshLWF5cGHNavSgQ
Culb5ALOzoxSlcZ4xfVfWtBGoFr/BNu9D0omTSmbosvXAd4HmPVxD6kV17wXV3+g
G/cvew==
=D+x7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20220211' into staging
Fix safe_syscall_base for sparc64.
Fix host signal handling for sparc64-linux.
Speedups for jump cache and work list probing.
Fix for exception replays.
Raise guest SIGBUS for user-only misaligned accesses.
# gpg: Signature made Fri 11 Feb 2022 01:27:16 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth-gitlab/tags/pull-tcg-20220211: (34 commits)
tests/tcg/multiarch: Add sigbus.c
tcg/sparc: Support unaligned access for user-only
tcg/sparc: Add tcg_out_jmpl_const for better tail calls
tcg/sparc: Use the constant pool for 64-bit constants
tcg/sparc: Convert patch_reloc to return bool
tcg/sparc: Improve code gen for shifted 32-bit constants
tcg/sparc: Add scratch argument to tcg_out_movi_int
tcg/sparc: Split out tcg_out_movi_imm32
tcg/sparc: Use tcg_out_movi_imm13 in tcg_out_addsub2_i64
tcg/mips: Support unaligned access for softmmu
tcg/mips: Support unaligned access for user-only
tcg/arm: Support raising sigbus for user-only
tcg/arm: Reserve a register for guest_base
tcg/arm: Support unaligned access for softmmu
tcg/arm: Check alignment for ldrd and strd
tcg/arm: Remove use_armv6_instructions
tcg/arm: Remove use_armv5t_instructions
tcg/arm: Drop support for armv4 and armv5 hosts
tcg/loongarch64: Support raising sigbus for user-only
tcg/tci: Support raising sigbus for user-only
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can't always guarantee we get to the end of a translator loop.
Although this can happen for a variety of reasons it does happen more
often on x86 system emulation when an instruction spans across to an
un-faulted page. This caused confusion of the instruction tracking
data resulting in apparent reverse execution (at least from the
plugins point of view).
Fix this by moving the reset code to plugin_gen_tb_start so we always
start with a clean slate.
We unconditionally reset tcg_ctx->plugin_insn as the
plugin_insn_append code uses this as a proxy for knowing if plugins
are enabled for the current instruction. Otherwise we can hit a race
where a previously instrumented thread leaves a stale value after the
main thread exits and disables instrumentation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/824
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-27-alex.bennee@linaro.org>
If you really want to trace all memory operations TCG plugins gives
you a more flexible interface for doing so.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Luis Vilanova <vilanova@imperial.ac.uk>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220204204335.1689602-19-alex.bennee@linaro.org>
Commit aff0e204cb introduced CF_NOIRQ usage,
but one case was forgotten. Record/replay uses one special TB which is not
really executed, but used to cause a correct exception in replay mode.
This patch adds CF_NOIRQ flag for such block.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <164362834054.1754532.7678416881159817273.stgit@pasha-ThinkPad-X280>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the length of the range is large enough, clearing the whole cache is
faster than iterating over the (possibly extremely large) set of pages
contained in the range.
This mimics the pre-existing similar optimization done on the flush of the
tlb itself.
Signed-off-by: Idan Horowitz <idan.horowitz@gmail.com>
Message-Id: <20220110164754.1066025-1-idan.horowitz@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As --enable-profiler isn't defended in CI we missed this breakage.
Move the qmp handler into accel/tcg so we have access to the helpers
we need. While we are at it ensure we gate the feature on CONFIG_TCG.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 37087fde0e ("qapi: introduce x-query-profile QMP command")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/773
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220105135009.1584676-23-alex.bennee@linaro.org>
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the KVM_GUESTDBG_BLOCKIRQ debug flag if supported.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
[Extracted from Maxim's patch into a separate commit. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211111110604.207376-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
[Extracted from Maxim's patch into a separate commit. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211111110604.207376-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we set cpu->cflags_next_tb it is because we want to carefully
control the execution of the next TB. Currently there is a race that
causes the second stage of watchpoint handling to get ignored if an
IRQ is processed before we finish executing the instruction that
triggers the watchpoint. Use the new CF_NOIRQ facility to avoid the
race.
We also suppress IRQs when handling precise self modifying code to
avoid unnecessary bouncing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/245
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211129140932.4115115-3-alex.bennee@linaro.org>
dlopen is never used after it is sought via cc.find_library, because
plugins use gmodule instead; remove the test.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211110092454.30916-1-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211115142915.3797652-5-alex.bennee@linaro.org>
A TCG vCPU doing a busy loop systematicaly hangs the QEMU monitor
if the user passes 'device_add' without argument. This is because
drain_cpu_all() which is called from qmp_device_add() cannot return
if readers don't exit read-side critical sections. That is typically
what busy-looping TCG vCPUs do:
int cpu_exec(CPUState *cpu)
{
[...]
rcu_read_lock();
[...]
while (!cpu_handle_exception(cpu, &ret)) {
// Busy loop keeps vCPU here
}
[...]
rcu_read_unlock();
return ret;
}
For MTTCG, have all vCPU threads register a force_rcu notifier that will
kick them out of the loop using async_run_on_cpu(). The notifier is called
with the rcu_registry_lock mutex held, using async_run_on_cpu() ensures
there are no deadlocks.
For RR, a single thread runs all vCPUs. Just register a single notifier
that kicks the current vCPU to the next one.
For MTTCG:
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
For RR:
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Fixes: 7bed89958b ("device_core: use drain_call_rcu in in qmp_device_add")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/650
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211109183523.47726-3-groug@kaod.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently we make the assumption that the guest frontend loads all
op code bytes sequentially. This mostly holds up for regular fixed
encodings but some architectures like s390x like to re-read the
instruction which causes weirdness to occur. Rather than changing the
frontends make the plugin API a little more ergonomic and able to
handle the re-read case.
Stuff will still get strange if we read ahead of the opcode but so far
no front ends have done that and this patch asserts the case so we can
catch it early if they do.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211026102234.3961636-21-alex.bennee@linaro.org>
* DMA support in the multiboot option ROM
* Rename default-bus-bypass-iommu
* Deprecate -watchdog and cleanup -watchdog-action
* HVF fix for <PAGE_SIZE regions
* Support TSC scaling for AMD nested virtualization
* Fix for ESP fuzzing bug
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGBUeEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOh+Qf+OMRhRiv6dYjbK/5zXrx81AgxYAY3
dBUSr8v16LyrMl1U3DZWzhD+MzQsC83m/Xsh4lGxlHDWtkK9QQA5xDG95JZdY26i
MGCbbjnFHISbyBQV9Y724gPfPjOOODuoFbzafSx6VLITOcyv1ye0cm7TOjOPB+tt
E4c3JqTZ7g8a5yMe8ItkVhz5pPY+oVw8dxMNRp6Sup5Dbfx0DjacIwLasLsHfPL7
qBADfqB20ovHUzLjXu7oWgEd4KxJ6kiSCaJJu/KD36hg0wB8+WVP1o43j4PkczHT
QjU7eZaeaTrN5Cf34ttPge6QReMi5SFNCaA9O9/HLqrQgdEtt/diZWuqjQ==
=a2mC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Build system fixes and cleanups
* DMA support in the multiboot option ROM
* Rename default-bus-bypass-iommu
* Deprecate -watchdog and cleanup -watchdog-action
* HVF fix for <PAGE_SIZE regions
* Support TSC scaling for AMD nested virtualization
* Fix for ESP fuzzing bug
# gpg: Signature made Tue 02 Nov 2021 10:57:37 AM EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* remotes/bonzini/tags/for-upstream: (27 commits)
configure: fix --audio-drv-list help message
configure: Remove the check for the __thread keyword
Move the l2tpv3 test from configure to meson.build
meson: remove unnecessary coreaudio test program
meson: remove pointless warnings
meson.build: Allow to disable OSS again
meson: bump submodule to 0.59.3
qtest/am53c974-test: add test for cancelling in-flight requests
esp: ensure in-flight SCSI requests are always cancelled
KVM: SVM: add migration support for nested TSC scaling
hw/i386: fix vmmouse registration
watchdog: remove select_watchdog_action
vl: deprecate -watchdog
watchdog: add information from -watchdog help to -device help
hw/i386: Rename default_bus_bypass_iommu
hvf: Avoid mapping regions < PAGE_SIZE as ram
configure: do not duplicate CPU_CFLAGS into QEMU_LDFLAGS
configure: remove useless NPTL probe
target/i386: use DMA-enabled multiboot ROM for new-enough QEMU machine types
optionrom: add a DMA-enabled multiboot ROM
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
to linux-user/host/arch/host-signal.h
- Replace TCGCPUOps.tlb_fill with TCGCPUOps.record_sigsegv for user-only
- Add TCGCPUOps.record_sigbus for user-only
- Remove a lot of target-specific cpu_loop handling for signals,
now accomplished with generic code.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmGBG6YdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+6Lwf6A03bNhdXQjSjwUOD
tW0qGiZ5jtomitHdR04xawkGYWyAoojg7QMm8ZsOgGaGHVRaycmIXaOhIbX7S9/I
aV0nSn4GHhCWtvFUFvsYdptN/sf1AtuG6L1T4uzJ3qog1G6aKbdbRl85aWWR4w6P
+YTsQIQaU16k7vG7WwItMyga2fcAgT1qkofCHokw5CCJfni6mfNF1Ku8cWSVHSwF
5KXs7G5nGLHLKEAtrE+R7xzJPPwwmWR3BNHeTWSd0YDEMWEMxSzLZEHnnTeos4EF
Hl1WNNO7d8W6KWud4nsMBuPumIMtJwDtqUqSyW4DfvO+Dw+dgvAqoxt8bV/jtJp+
QCLE0g==
=Vv/u
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20211102' into staging
- Split out host signal handing from accel/tcg/user-exec.c
to linux-user/host/arch/host-signal.h
- Replace TCGCPUOps.tlb_fill with TCGCPUOps.record_sigsegv for user-only
- Add TCGCPUOps.record_sigbus for user-only
- Remove a lot of target-specific cpu_loop handling for signals,
now accomplished with generic code.
# gpg: Signature made Tue 02 Nov 2021 07:06:14 AM EDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* remotes/rth/tags/pull-tcg-20211102: (60 commits)
linux-user: Handle BUS_ADRALN in host_signal_handler
tcg: Add helper_unaligned_{ld,st} for user-only sigbus
accel/tcg: Report unaligned load/store for user-only
accel/tcg: Report unaligned atomics for user-only
target/sparc: Set fault address in sparc_cpu_do_unaligned_access
target/sparc: Split out build_sfsr
target/sparc: Remove DEBUG_UNALIGNED
target/sh4: Set fault address in superh_cpu_do_unaligned_access
target/s390x: Implement s390x_cpu_record_sigbus
linux-user/ppc: Remove POWERPC_EXCP_ALIGN handling
target/ppc: Restrict ppc_cpu_do_unaligned_access to sysemu
target/ppc: Set fault address in ppc_cpu_do_unaligned_access
target/ppc: Move SPR_DSISR setting to powerpc_excp
target/microblaze: Do not set MO_ALIGN for user-only
linux-user/hppa: Remove EXCP_UNALIGN handling
target/arm: Implement arm_cpu_record_sigbus
target/alpha: Implement alpha_cpu_record_sigbus
linux-user: Add cpu_loop_exit_sigbus
hw/core: Add TCGCPUOps.record_sigbus
accel/tcg: Restrict TCGCPUOps::tlb_fill() to sysemu
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a counterpart to the HMP "info opcount" command. It is being
added with an "x-" prefix because this QMP command is intended as an
ad hoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info jit" command. It is being
added with an "x-" prefix because this QMP command is intended as an
ad hoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
HVF has generic memory listener code that adds all RAM regions as HVF RAM
regions. However, HVF can only handle page aligned, page granule regions.
So let's ignore regions that are not page aligned and sized. They will be
trapped as MMIO instead.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211025132147.28308-1-agraf@csgraf.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To be called from tcg generated code on hosts that support
unaligned accesses natively, in response to an access that
is supposed to be aligned.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the new cpu_loop_exit_sigbus for cpu_mmu_lookup.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the new cpu_loop_exit_sigbus for atomic_mmu_lookup, which
has access to complete alignment info from the TCGMemOpIdx arg.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a new interface to be provided by the os emulator for
raising SIGSEGV on fault. Use the new record_sigsegv target hook.
Reviewed by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split host_signal_pc and host_signal_write out of user-exec.c.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split host_signal_pc and host_signal_write out of user-exec.c.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split host_signal_pc and host_signal_write out of user-exec.c.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split host_signal_pc and host_signal_write out of user-exec.c.
Drop the *BSD code, to be re-created under bsd-user/ later.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split host_signal_pc and host_signal_write out of user-exec.c.
Drop the *BSD code, to be re-created under bsd-user/ later.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split host_signal_pc and host_signal_write out of user-exec.c.
Drop the *BSD code, to be re-created under bsd-user/ later.
Drop the Solaris code as completely unused.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split host_signal_pc and host_signal_write out of user-exec.c.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split host_signal_pc and host_signal_write out of user-exec.c.
Drop the *BSD code, to be re-created under bsd-user/ later.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split host_signal_pc and host_signal_write out of user-exec.c.
Drop the *BSD code, to be re-created under bsd-user/ later.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
dirty_pages is used to calculate dirtyrate via dirty ring, when
enabled, kvm-reaper will increase the dirty pages after gfns
being dirtied.
kvm_dirty_ring_enabled shows if kvm-reaper is working. dirtyrate
thread could use it to check if measurement can base on dirty
ring feature.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <fee5fb2ab17ec2159405fc54a3cff8e02322f816.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Remove the comment about siglongjmp. We do use sigsetjmp
in the main cpu loop, but we do not save the signal mask
as most exits from the cpu loop do not require them.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
