Commit Graph

114 Commits

Author SHA1 Message Date
Daniel Henrique Barboza
4c1608caa4 tests/libqos: add riscv/virt machine nodes
Add a RISC-V 'virt' machine to the graph. This implementation is a
modified copy of the existing arm machine in arm-virt-machine.c

It contains a virtio-mmio and a generic-pcihost controller. The
generic-pcihost controller hardcodes assumptions from the ARM 'virt'
machine, like ecam and pio_base addresses, so we'll add an extra step to
set its parameters after creating it.

Our command line is incremented with 'aclint' parameters to allow the
machine to run MSI tests.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240217192607.32565-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-03-08 16:48:40 +10:00
Alex Bennée
13ddcf0a7a tests: bump QOS_PATH_MAX_ELEMENT_SIZE again
We "fixed" a bug with LTO builds with 100c459f19 (tests/qtest: bump
up QOS_PATH_MAX_ELEMENT_SIZE) but it seems it has triggered again.

The array is sized according to the maximum anticipated length of a
path on the graph. However, the worst case for a depth-first search is
to push all nodes on the graph. So it's not really LTO, it depends on
the ordering of the constructors.

Lets be more assertive raising QOS_PATH_MAX_ELEMENT_SIZE to make it go
away again.

Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1186 (again)
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-2-alex.bennee@linaro.org>
2024-03-06 12:35:09 +00:00
Daniel Henrique Barboza
3283843a8e libqos/virtio.c: fix 'avail_event' offset in qvring_init()
In qvring_init() we're writing vq->used->avail_event at "vq->used + 2 +
array_size".  The struct pointed by vq->used is, from virtio_ring.h
Linux header):

 *	// A ring of used descriptor heads with free-running index.
 *	__virtio16 used_flags;
 *	__virtio16 used_idx;
 *	struct vring_used_elem used[num];
 *	__virtio16 avail_event_idx;

So 'flags' is the word right at vq->used. 'idx' is vq->used + 2. We need
to skip 'used_idx' by adding + 2 bytes, and then sum the vector size, to
reach avail_event_idx. An example on how to properly access this field
can be found in qvirtqueue_kick():

avail_event = qvirtio_readw(d, qts, vq->used + 4 +
                            sizeof(struct vring_used_elem) * vq->size);

This error was detected when enabling the RISC-V 'virt' libqos machine.
The 'idx' test from vhost-user-blk-test.c errors out with a timeout in
qvirtio_wait_used_elem(). The timeout happens because when processing
the first element, 'avail_event' is read in qvirtqueue_kick() as non-zero
because we didn't initialize it properly (and the memory at that point
happened to be non-zero). 'idx' is 0.

All of this makes this condition fail because "idx - avail_event" will
overflow and be non-zero:

/* < 1 because we add elements to avail queue one by one */
if ((flags & VRING_USED_F_NO_NOTIFY) == 0 &&
                        (!vq->event || (uint16_t)(idx-avail_event) < 1)) {
    d->bus->virtqueue_kick(d, vq);
}

As a result the virtqueue is never kicked and we'll timeout waiting for it.

Fixes: 1053587c3f ("libqos: Added EVENT_IDX support")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240217192607.32565-3-dbarboza@ventanamicro.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-03-01 08:27:33 +01:00
Daniel Henrique Barboza
2791490de1 libqos/virtio.c: init all elems in qvring_indirect_desc_setup()
The loop isn't setting the values for the last element. Every other
element is being initialized with addr = 0, flags = VRING_DESC_F_NEXT
and next = i + 1. The last elem is never touched.

This became a problem when enabling a RISC-V 'virt' libqos machine in
the 'indirect' test of virti-blk-test.c. The 'flags' for the last
element will end up being an odd number (since we didn't touch it).
Being an odd number it will be mistaken by VRING_DESC_F_NEXT, which
happens to be 1.

Deep into hw/virt/virtio.c, in virtqueue_split_pop(), into
virtqueue_split_read_next_desc(), a check for VRING_DESC_F_NEXT will be
made to see if we're supposed to chain. The code will keep up chaining
in the last element because the uninitialized value happens to be odd.
We'll error out right after that because desc->next (which is also
uninitialized) will be >= max. A VIRTQUEUE_READ_DESC_ERROR will be
returned, with an error message like this in the stderr:

qemu-system-riscv64: Desc next is 49391

Since we never returned, we'll end up timing out at qvirtio_wait_used_elem():

ERROR:../tests/qtest/libqos/virtio.c:236:qvirtio_wait_used_elem:
    assertion failed: (g_get_monotonic_time() - start_time <= timeout_us)

The root cause is using uninitialized values from guest_alloc() in
qvring_indirect_desc_setup(). There's no guarantee that the memory pages
retrieved will be zeroed, so we can't make assumptions. In fact, commit
5b4f72f5e8 ("tests/qtest: properly initialise the vring used idx") fixed a
similar problem stating "It is probably not wise to assume guest memory
is zeroed anyway". I concur.

Initialize all elems in qvring_indirect_desc_setup().

Fixes: f294b029aa ("libqos: Added indirect descriptor support to virtio implementation")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240217192607.32565-2-dbarboza@ventanamicro.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-03-01 08:27:33 +01:00
Tomasz Dzieciol
17ccd01647 igb: RX payload guest writting refactoring
Refactoring is done in preparation for support of multiple advanced
descriptors RX modes, especially packet-split modes.

Signed-off-by: Tomasz Dzieciol <t.dzieciol@partner.samsung.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-09-18 14:36:13 +08:00
Michael Tokarev
96420a30e0 tests/: spelling fixes
with some rewording in
 tests/qemu-iotests/298
 tests/qtest/fuzz/generic_fuzz.c
 tests/unit/test-throttle.c
as suggested by Eric.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
2023-09-08 13:08:52 +03:00
Niklas Cassel
1a16ce64fd hw/ide/ahci: PxCI should not get cleared when ERR_STAT is set
For NCQ, PxCI is cleared on command queued successfully.
For non-NCQ, PxCI is cleared on command completed successfully.
Successfully means ERR_STAT, BUSY and DRQ are all cleared.

A command that has ERR_STAT set, does not get to clear PxCI.
See AHCI 1.3.1, section 5.3.8, states RegFIS:Entry and RegFIS:ClearCI,
and 5.3.16.5 ERR:FatalTaskfile.

In the case of non-NCQ commands, not clearing PxCI is needed in order
for host software to be able to see which command slot that failed.

Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Message-id: 20230609140844.202795-7-nks@flawful.org
Signed-off-by: John Snow <jsnow@redhat.com>
2023-09-06 22:48:04 -04:00
Richard Henderson
2bb9d628a7 pc,pci,virtio: cleanups, fixes, features
vhost-user-gpu: edid
 vhost-user-scmi device
 vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq
 
 cleanups, fixes all over the place.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN
 qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6
 D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd
 n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5
 cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L
 UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA=
 =RsOh
 -----END PGP SIGNATURE-----

Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

pc,pci,virtio: cleanups, fixes, features

vhost-user-gpu: edid
vhost-user-scmi device
vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq

cleanups, fixes all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN
# qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6
# D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd
# n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5
# cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L
# UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA=
# =RsOh
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 11 Jul 2023 12:00:19 AM BST
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (66 commits)
  vdpa: Allow VIRTIO_NET_F_CTRL_RX_EXTRA in SVQ
  vdpa: Restore packet receive filtering state relative with _F_CTRL_RX_EXTRA feature
  vdpa: Allow VIRTIO_NET_F_CTRL_RX in SVQ
  vdpa: Avoid forwarding large CVQ command failures
  vdpa: Accessing CVQ header through its structure
  vhost: Fix false positive out-of-bounds
  vdpa: Restore packet receive filtering state relative with _F_CTRL_RX feature
  vdpa: Restore MAC address filtering state
  vdpa: Use iovec for vhost_vdpa_net_load_cmd()
  pcie: Specify 0 for ARI next function numbers
  pcie: Use common ARI next function number
  include/hw/virtio: document some more usage of notifiers
  include/hw/virtio: add kerneldoc for virtio_init
  include/hw/virtio: document virtio_notify_config
  hw/virtio: fix typo in VIRTIO_CONFIG_IRQ_IDX comments
  include/hw: document the device_class_set_parent_* fns
  include: attempt to document device_class_set_props
  vdpa: Fix possible use-after-free for VirtQueueElement
  pcie: Add hotplug detect state register to cmask
  virtio-iommu: Rework the traces in virtio_iommu_set_page_size_mask()
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-11 09:33:12 +01:00
Milan Zamazal
b6f53ae005 tests/qtest: enable tests for virtio-scmi
We don't have a virtio-scmi implementation in QEMU and only support a
vhost-user backend.  This is very similar to virtio-gpio and we add the same
set of tests, just passing some vhost-user messages over the control socket.

Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230628100524.342666-4-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10 16:17:08 -04:00
Thomas Huth
25919c4025 tests/qtest: Move mkimg() and have_qemu_img() from libqos to libqtest
These two functions can be useful for other qtests beside the
qos-test, too, so move them to libqtest instead.

Message-Id: <20230704071655.75381-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-10 15:34:57 +02:00
Akihiko Odaki
c6e33a2c52 tests/qtest/libqos/igb: Set GPIE.Multiple_MSIX
GPIE.Multiple_MSIX is not set by default, and needs to be set to get
interrupts from multiple MSI-X vectors.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23 15:20:15 +08:00
Christian Schoenebeck
f91ce58cb2 tests/9p: fix potential leak in v9fs_rreaddir()
Free allocated directory entries in v9fs_rreaddir() if argument
`entries` was passed as NULL, to avoid a memory leak. It is
explicitly allowed by design for `entries` to be NULL. [1]

[1] https://lore.kernel.org/all/1690923.g4PEXVpXuU@silver

Reported-by: Coverity (CID 1487558)
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1psh5T-0002XN-1C@lizzy.crudebyte.com>
2023-05-16 16:21:54 +02:00
Akihiko Odaki
45cb69bbd6 igb: Introduce qtest for igb device
This change is derived from qtest for e1000e device.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Thomas Huth <thuth@redhat.com>
[Jason: make qtest work for win32 (only hotplug)]
Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10 17:26:47 +08:00
Akihiko Odaki
0caa7effcc tests/qtest/libqos/e1000e: Export macreg functions
They will be useful for igb testing.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10 17:26:47 +08:00
Akihiko Odaki
00dc9a5911 tests/qtest/e1000e-test: Fabricate ethernet header
e1000e understands ethernet header so fabricate something convincing.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10 17:26:47 +08:00
Akihiko Odaki
57b8d8d6c2 tests/qtest/libqos/e1000e: Remove duplicate register definitions
The register definitions in tests/qtest/libqos/e1000e.h had names
different from hw/net/e1000_regs.h, which made it hard to understand
what test codes corresponds to the implementation. Use
hw/net/e1000_regs.h from tests/qtest/libqos/e1000e.c to remove
these duplications.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230114035919.35251-20-akihiko.odaki@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-01-18 12:27:21 +01:00
Akihiko Odaki
da994bac07 tests/qtest/e1000e-test: Fix the code style
igb implementation first starts off by copying e1000e code. Correct the
code style before that.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230114035919.35251-19-akihiko.odaki@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-01-18 12:27:21 +01:00
Daniel P. Berrangé
0472b2e541 tests: add G_GNUC_PRINTF for various functions
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221219130205.687815-6-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-11 10:44:34 +01:00
Akihiko Odaki
44c397b279 tests/qtest/libqos/e1000e: Correctly group register accesses
Add a newline after E1000_TCTL write and make it clear that E1000_TCTL
write is what enabling transmit.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221110114549.66081-1-akihiko.odaki@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-12-15 15:19:24 +01:00
Akihiko Odaki
ff6b7d3cd5 tests/qtest/libqos/e1000e: Remove "other" interrupts
The "other" kind of interrupts are not used in the tests.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221110114045.65544-1-akihiko.odaki@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-12-15 15:19:24 +01:00
Alex Bennée
523e40022f tests/qtests: override "force-legacy" for gpio virtio-mmio tests
The GPIO device is a VIRTIO_F_VERSION_1 devices but running with a
legacy MMIO interface we miss out that feature bit causing confusion.
For the GPIO test force the mmio bus to support non-legacy so we can
properly test it.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1333
Message-Id: <20221130112439.2527228-2-alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-01 02:29:59 -05:00
Stefan Weil
2cb40d446f Fix several typos in documentation (found by codespell)
Those typos are in files which are used to generate the QEMU manual.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221110190825.879620-1-sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[thuth: update sentence in can.rst as suggested by Peter]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-11-11 09:39:25 +01:00
Akihiko Odaki
624ee20cb9 tests/qtest/libqos/e1000e: Use IVAR shift definitions
There were still some constants defined in e1000_regs.h.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221105053010.38037-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-11-06 10:14:26 +01:00
Akihiko Odaki
5ebafa1643 tests/qtest/libqos/e1000e: Use E1000_STATUS_ASDV_1000
Nemonics E1000_STATUS_LAN_INIT_DONE and E1000_STATUS_ASDV_1000 have
the same value, and E1000_STATUS_ASDV_1000 should be used here because
E1000_STATUS_ASDV_1000 represents the auto-detected speed tested here
while E1000_STATUS_LAN_INIT_DONE is a value used for a different purpose
with a variant of e1000e family different from the one implemented in
QEMU.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103083425.100590-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-11-06 10:14:26 +01:00
Akihiko Odaki
ff4f45811f tests/qtest/libqos/e1000e: Set E1000_CTRL_SLU
The later device status check depends on E1000_STATUS_LU, which is
enabled by E1000_CTRL_SLU. Though E1000_STATUS_LU is not implemented
and E1000_STATUS_LU is always available in the current implementation,
be a bit nicer and set E1000_CTRL_SLU just in case the bit is
implemented in the future.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103025451.27446-1-akihiko.odaki@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-11-06 10:14:26 +01:00
Akihiko Odaki
897c0da96f tests/qtest/libqos/e1000e: Refer common PCI ID definitions
This is yet another minor cleanup to ease understanding and
future refactoring of the tests.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103015017.19947-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-11-06 10:14:26 +01:00
Bin Meng
8aff9c3279 tests/qtest: libqos: Do not build virtio-9p unconditionally
At present the virtio-9p related codes are built into libqos
unconditionally. Change to build them conditionally by testing
the 'virtfs' config option.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221028045736.679903-9-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-28 14:32:09 +02:00
Akihiko Odaki
0e283d845e tests/qtest/libqos/e1000e: Use e1000_regs.h
The register definitions in tests/qtest/libqos/e1000e.c had names
different from hw/net/e1000_regs.h, which made it hard to understand
what test codes corresponds to the implementation. Use
hw/net/e1000_regs.h from tests/qtest/libqos/e1000e.c to remove
these duplications.

E1000E_CTRL_EXT_TXLSFLOW is removed from E1000E_CTRL_EXT settings
because hw/net/e1000_regs.h does not have the definition and it is for
TCP segmentation offload, which does not matter for the implemented
tests.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221013055245.28102-1-akihiko.odaki@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-28 09:39:21 +02:00
Christian Schoenebeck
3ce77865bf tests/9p: remove unnecessary g_strdup() calls
This is a leftover from before the recent function merge and
refactoring patches:

As these functions do not return control to the caller in
between, it is not necessary to duplicate strings passed to them.

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <0f80141cde3904ed0591354059da49d1d60bcdbc.1664917004.git.qemu_oss@crudebyte.com>
2022-10-24 12:24:32 +02:00
Christian Schoenebeck
43e0d9fb35 tests/9p: merge v9fs_tunlinkat() and do_unlinkat()
As with previous patches, unify those 2 functions into a single function
v9fs_tunlinkat() by using a declarative function arguments approach.

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <1dea593edd464908d92501933c068388c01f1744.1664917004.git.qemu_oss@crudebyte.com>
2022-10-24 12:24:32 +02:00
Christian Schoenebeck
d41a9462ea tests/9p: merge v9fs_tlink() and do_hardlink()
As with previous patches, unify those 2 functions into a single function
v9fs_tlink() by using a declarative function arguments approach.

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <cb4d42203e1e4e6027df4924bbe4bdbc002f668b.1664917004.git.qemu_oss@crudebyte.com>
2022-10-24 12:24:32 +02:00
Christian Schoenebeck
9beabfa52c tests/9p: merge v9fs_tsymlink() and do_symlink()
As with previous patches, unify those 2 functions into a single function
v9fs_tsymlink() by using a declarative function arguments approach.

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <563f3ad04fe596ce0ae1e2654d1d08237f18c830.1664917004.git.qemu_oss@crudebyte.com>
2022-10-24 12:24:32 +02:00
Christian Schoenebeck
bd4660d49a tests/9p: merge v9fs_tlcreate() and do_lcreate()
As with previous patches, unify those 2 functions into a single function
v9fs_tlcreate() by using a declarative function arguments approach.

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <4c01b2caa5f5b54a2020fc92701deadd2abf0571.1664917004.git.qemu_oss@crudebyte.com>
2022-10-24 12:24:32 +02:00
Christian Schoenebeck
e11680102a tests/9p: merge v9fs_tmkdir() and do_mkdir()
As with previous patches, unify those 2 functions into a single function
v9fs_tmkdir() by using a declarative function arguments approach.

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <b87b2c972921df980440ff5b2d3e6bb8163d6551.1664917004.git.qemu_oss@crudebyte.com>
2022-10-24 12:24:32 +02:00
Christian Schoenebeck
d89146fd16 tests/9p: convert v9fs_tflush() to declarative arguments
Use declarative function arguments for function v9fs_tflush().

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <91b7b154298c500d100b05137146c2905c3acdec.1664917004.git.qemu_oss@crudebyte.com>
2022-10-24 12:24:32 +02:00
Christian Schoenebeck
ac9e4e6185 tests/9p: convert v9fs_twrite() to declarative arguments
Use declarative function arguments for function v9fs_twrite().

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <be0326e2d9ab66f68c06b1766ddf103849d570b4.1664917004.git.qemu_oss@crudebyte.com>
2022-10-24 12:24:32 +02:00
Christian Schoenebeck
3878ce4cc2 tests/9p: convert v9fs_tlopen() to declarative arguments
Use declarative function arguments for function v9fs_tlopen().

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <765ab515353c56f88f0a163631f626a44e9565d6.1664917004.git.qemu_oss@crudebyte.com>
2022-10-24 12:24:32 +02:00
Christian Schoenebeck
1ebacc40ca tests/9p: convert v9fs_treaddir() to declarative arguments
Use declarative function arguments for function v9fs_treaddir().

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <a66aae4ceb19ec12d245b8c7f33a639584c8e272.1664917004.git.qemu_oss@crudebyte.com>
2022-10-24 12:24:32 +02:00
Christian Schoenebeck
2af5be47b9 tests/9p: convert v9fs_tgetattr() to declarative arguments
Use declarative function arguments for function v9fs_tgetattr().

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <d340a91be96fbfecfb8dacdd7558223b3c0d0e2c.1664917004.git.qemu_oss@crudebyte.com>
2022-10-24 12:24:32 +02:00
Christian Schoenebeck
74a160aba9 tests/9p: merge v9fs_tattach(), do_attach(), do_attach_rqid()
As with previous patches, unify those 3 functions into a single function
v9fs_tattach() by using a declarative function arguments approach.

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <a6756b30bf2a1b25729c5bbabd1c9534a8f20d6f.1664917004.git.qemu_oss@crudebyte.com>
2022-10-24 12:24:32 +02:00
Christian Schoenebeck
bee8fda2f9 tests/9p: merge v9fs_tversion() and do_version()
As with previous patches, unify functions v9fs_tversion() and do_version()
into a single function v9fs_tversion() by using a declarative function
arguments approach.

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <2d253491aaffd267ec295f056dda47456692cd0c.1664917004.git.qemu_oss@crudebyte.com>
2022-10-24 12:24:32 +02:00
Christian Schoenebeck
569f3b63ad tests/9p: merge *walk*() functions
Introduce declarative function calls.

There are currently 4 different functions for sending a 9p 'Twalk'
request: v9fs_twalk(), do_walk(), do_walk_rqids() and
do_walk_expect_error(). They are all doing the same thing, just in a
slightly different way and with slightly different function arguments.

Merge those 4 functions into a single function by using a struct for
function call arguments and use designated initializers when calling
this function to turn usage into a declarative approach, which is
better readable and easier to maintain.

Also move private functions genfid(), split() and split_free() from
virtio-9p-test.c to virtio-9p-client.c.

Based-on: <E1odrya-0004Fv-97@lizzy.crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <607969dbfbc63c1be008df9131133711b046e979.1664917004.git.qemu_oss@crudebyte.com>
2022-10-24 12:24:32 +02:00
Christian Schoenebeck
684f912034 tests/9p: split virtio-9p-test.c into tests and 9p client part
This patch is pure refactoring, it does not change behaviour.

virtio-9p-test.c grew to 1657 lines. Let's split this file up between
actual 9p test cases vs. 9p test client, to make it easier to
concentrate on the actual 9p tests.

Move the 9p test client code to a new unit virtio-9p-client.c, which
are basically all functions and types prefixed with v9fs_* already.

Note that some client wrapper functions (do_*) are preserved in
virtio-9p-test.c, simply because these wrapper functions are going to
be wiped with subsequent patches anyway.

As the global QGuestAllocator variable is moved to virtio-9p-client.c,
add a new function v9fs_set_allocator() to be used by virtio-9p-test.c
instead of fiddling with a global variable across units and libraries.

Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1odrya-0004Fv-97@lizzy.crudebyte.com>
2022-10-24 12:24:32 +02:00
Stefan Hajnoczi
7a37814aeb * Rework of qtests to support hot plugging tests on q35
* New VNC qtest
 * Fixes related to temporary file handling in the tests
 * Use signal() instead of sigaction() since the latter does not work on Windows
 * Some other small clean-ups
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmNGz1URHHRodXRoQHJl
 ZGhhdC5jb20ACgkQLtnXdP5wLbXwxxAAoh9CeYKLyPFPe71XGsSWW4mQDkny+4CA
 AFBfcEchPSyOoTJwuSHS5cL27KkL1Wy7wTSlWdcQ2Z4LA8hexopfPtCVlizH8vQh
 hHVP5KLDY7WA7bsuRznrjUjXtjLL9mExuPm3QZ+YxH/3rNhISvq1GfC9Z5PQ/zNp
 GagCW+WiFyEYyhRHJnVVTJfZV0NCbJp9KCCJ6n/Rag80JRQiouGQsKLfRoRhvkGC
 13dWq2NeDq9xE1k1ThUZdIpUxJO4cA+9bh6LzGOIcHX8akfkryh3NGCWuojX3XDF
 2CRyyblfjMIp5HUcKNOrQzY1oGRn8y5537ycUkEsropSMdAccIqNwlcWO7whLEGn
 7nbogrPt8Orezytl5ZM3WopWlge5KA2vxOUURx487LnZC2/g7l2unrCDv0c3PHDb
 U2fD5do7ZtPOl9Uz8QkYPo5CzEDnKPmPv1txOMBRcBZsvmXPZMxRWwsYavB/RloG
 nI9IvG3ZW6ivKwoPPceJberL8Ndq+pqn7y4CNNAAunHSjJ2H0YS1m1F/HfVWKJYJ
 uStXy3IZ5Qo8E+IRbPYyM68yBgrnaShuAvTSax8tWjhHOR8HetrzPABMrWylCrdo
 gaeSCEZmqf2zIYHQ2q8c7U/YrHgFNHlLz9yCyM6rZtU9dOAe52PG2TlRQomlGP76
 NKnti3RJWG4=
 =4f+b
 -----END PGP SIGNATURE-----

Merge tag 'pull-request-2022-10-12' of https://gitlab.com/thuth/qemu into staging

* Rework of qtests to support hot plugging tests on q35
* New VNC qtest
* Fixes related to temporary file handling in the tests
* Use signal() instead of sigaction() since the latter does not work on Windows
* Some other small clean-ups

# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmNGz1URHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXwxxAAoh9CeYKLyPFPe71XGsSWW4mQDkny+4CA
# AFBfcEchPSyOoTJwuSHS5cL27KkL1Wy7wTSlWdcQ2Z4LA8hexopfPtCVlizH8vQh
# hHVP5KLDY7WA7bsuRznrjUjXtjLL9mExuPm3QZ+YxH/3rNhISvq1GfC9Z5PQ/zNp
# GagCW+WiFyEYyhRHJnVVTJfZV0NCbJp9KCCJ6n/Rag80JRQiouGQsKLfRoRhvkGC
# 13dWq2NeDq9xE1k1ThUZdIpUxJO4cA+9bh6LzGOIcHX8akfkryh3NGCWuojX3XDF
# 2CRyyblfjMIp5HUcKNOrQzY1oGRn8y5537ycUkEsropSMdAccIqNwlcWO7whLEGn
# 7nbogrPt8Orezytl5ZM3WopWlge5KA2vxOUURx487LnZC2/g7l2unrCDv0c3PHDb
# U2fD5do7ZtPOl9Uz8QkYPo5CzEDnKPmPv1txOMBRcBZsvmXPZMxRWwsYavB/RloG
# nI9IvG3ZW6ivKwoPPceJberL8Ndq+pqn7y4CNNAAunHSjJ2H0YS1m1F/HfVWKJYJ
# uStXy3IZ5Qo8E+IRbPYyM68yBgrnaShuAvTSax8tWjhHOR8HetrzPABMrWylCrdo
# gaeSCEZmqf2zIYHQ2q8c7U/YrHgFNHlLz9yCyM6rZtU9dOAe52PG2TlRQomlGP76
# NKnti3RJWG4=
# =4f+b
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 12 Oct 2022 10:29:41 EDT
# gpg:                using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg:                issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg:                 aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg:                 aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg:                 aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3  EAB9 2ED9 D774 FE70 2DB5

* tag 'pull-request-2022-10-12' of https://gitlab.com/thuth/qemu:
  tests/unit/test-image-locking: Fix handling of temporary files
  tests/qtest: libqtest: Install signal handler via signal()
  tests/qtest: migration-test: Avoid using hardcoded /tmp
  qtest: start a VNC test
  tests/avocado: Add missing require_netdev('user') checks
  tests/x86: Add 'q35' machine type to ivshmem-test
  tests/x86: Add 'q35' machine type to drive_del-test
  tests/x86: replace snprint() by g_strdup_printf() in drive_del-test
  tests/x86: Fix comment typo in drive_del-test
  tests/x86: Add 'q35' machine type to hotplug hd-geo-test
  tests/x86: Add 'q35' machine type to override-tests in hd-geo-test
  tests/x86: Refactor hot unplug hd-geo-test
  tests/x86: Add subtest with 'q35' machine type to device-plug-test
  tests/x86: add helper qtest_qmp_device_del_send()
  tests/migration: remove the unused local variable
  qtest: "-display none" is set in qtest_init()

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-10-13 13:55:24 -04:00
Michael Labiuk
ea42a6c405 tests/x86: add helper qtest_qmp_device_del_send()
Move sending 'device_del' command to separate function.
Function can be used in case of addition action is needed to start
actual removing device after sending command.

Signed-off-by: Michael Labiuk <michael.labiuk@virtuozzo.com>
Message-Id: <20220929223547.1429580-2-michael.labiuk@virtuozzo.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fixed typo]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-11 14:06:48 +02:00
Alex Bennée
8fcfc8235e tests/qtest: enable tests for virtio-gpio
We don't have a virtio-gpio implementation in QEMU and only
support a vhost-user backend. The QEMU side of the code is minimal so
it should be enough to instantiate the device and pass some vhost-user
messages over the control socket. To do this we hook into the existing
vhost-user-test code and just add the bits required for gpio.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Message-Id: <20220408155704.2777166-1-alex.bennee@linaro.org>

Message-Id: <20220802095010.3330793-23-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-07 09:41:51 -04:00
Alex Bennée
3bd869f36e tests/qtest: add assert to catch bad features
No device driver (which is what the qvirtio_ access functions
represent) should be setting UNUSED(30) in the feature space. Although
existing libqos users mask it out lets ensure nothing sneaks through.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-20-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-07 09:41:51 -04:00
Alex Bennée
100c459f19 tests/qtest: bump up QOS_PATH_MAX_ELEMENT_SIZE
It seems the depth of stack we need to support can vary depending on
the order of the init constructors getting called. It seems
--enable-lto shuffles things around just enough to push you over the
limit.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1186
Acked-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220929114231.583801-12-alex.bennee@linaro.org>
2022-10-06 11:53:40 +01:00
Xuzhou Cheng
b243c73cf4 tests/qtest: libqos: Rename malloc.h to libqos-malloc.h
The qtest/libqos directory is included via the "-I" option to search
for header files when building qtest. Unfortunately the malloc.h has
a name conflict with the standard libc header, leading to a build
failure on the Windows host, due to the MinGW libc stdlib.h header
file includes malloc.h and it now gets wrongly pointed to the one
in the qtest/libqos directory.

Rename "qtest/libqos/malloc.h" to "qtest/libqos/libqos-malloc.h" to
avoid the namespace pollution.

Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220824094029.1634519-26-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-08-29 15:28:51 +02:00
Xuzhou Cheng
e0e4c27c6f tests/qtest: libqos: Drop inclusion of <sys/wait.h>
There is no <sys/wait.h> in the Windows build environment. Actually
this is not needed in the non-win32 builds too. Drop it.

Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220824094029.1634519-25-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-08-29 15:28:51 +02:00