* 'qom-cpu' of git://repo.or.cz/qemu/afaerber:
MAINTAINERS: Include X86CPU in CPU maintenance area
cpu: Move kvm_run into CPUState
cpu: Move kvm_state field into CPUState
ppc_booke: Pass PowerPCCPU to ppc_booke_timers_init()
ppc4xx_devs: Return PowerPCCPU from ppc4xx_init()
ppc_booke: Pass PowerPCCPU to {decr,fit,wdt} timer callbacks
ppc: Pass PowerPCCPU to [h]decr timer callbacks
ppc: Pass PowerPCCPU to [h]decr callbacks
ppc: Pass PowerPCCPU to ppc_set_irq()
kvm: Pass CPUState to kvm_vcpu_ioctl()
kvm: Pass CPUState to kvm_arch_*
cpu: Move kvm_fd into CPUState
qdev-properties.c: Separate core from the code used only by qemu-system-*
qdev: Coding style fixes
cpu: Introduce CPUListState struct
target-alpha: Add support for -cpu ?
target-alpha: Turn CPU definitions into subclasses
target-alpha: Avoid leaking the alarm timer over reset
alpha: Pass AlphaCPU array to Typhoon
target-alpha: Let cpu_alpha_init() return AlphaCPU
* Define enum for TMP105 registers
* Move tmp105_set() from I2C to TMP105 header
* Document units and range of temperature as preconditions
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alex Horn <alex.horn@cs.ox.ac.uk>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/header-dirs: (45 commits)
janitor: move remaining public headers to include/
hw: move executable format header files to hw/
fpu: move public header file to include/fpu
softmmu: move remaining include files to include/ subdirectories
softmmu: move include files to include/sysemu/
misc: move include files to include/qemu/
qom: move include files to include/qom/
migration: move include files to include/migration/
monitor: move include files to include/monitor/
exec: move include files to include/exec/
block: move include files to include/block/
qapi: move include files to include/qobject/
janitor: add guards to headers
qapi: make struct Visitor opaque
qapi: remove qapi/qapi-types-core.h
qapi: move inclusions of qemu-common.h from headers to .c files
ui: move files to ui/ and include/ui/
qemu-ga: move qemu-ga files to qga/
net: reorganize headers
net: move net.c to net/
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This separates the qdev properties code in two parts:
- qdev-properties.c, that contains most of the qdev properties code;
- qdev-properties-system.c for code specific for qemu-system-*,
containing:
- Property types: drive, chr, netdev, vlan, that depend on code that
won't be included on *-user
- qemu_add_globals(), that depends on qemu-config.o.
This change should help on two things:
- Allowing DeviceState to be used by *-user without pulling
dependencies that are specific for qemu-system-*;
- Writing qdev unit tests without pulling too many dependencies.
The copyright/license of qdev-properties.c isn't explicitly stated at
the file, so add a simple copyright/license header pointing to the
commit ID of the original file.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move public headers to include/net, and leave private headers in net/.
Put the virtio headers in include/net/tap.h, removing the multiple copies
that existed. Leave include/net/tap.h as the interface for NICs, and
net/tap_int.h as the interface for OS-specific parts of the tap backend.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Touching char/char.h basically causes the whole of QEMU to
be rebuilt. Avoid this, it is usually unnecessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Various header files rely on qemu-char.h including qemu-config.h or
main-loop.h, but they really do not need qemu-char.h at all (particularly
interesting is the case of the block layer!). Clean this up, and also
add missing inclusions of qemu-char.h itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the timer from CPUAlphaState to AlphaCPU to avoid the pointer being
zero'ed once we implement reset. Would cause a segfault in
sys_helper.c:helper_set_alarm().
This also simplifies timer initialization in Typhoon.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Richard Henderson <rth@twiddle.net>
* stefanha/trivial-patches:
configure: Earlier pkg-config probe
vmmouse_reset(): remove minimal code duplication
linux-user/syscall.c: remove wrong forward decl of setgroups()
fix build error on ARM due to wrong glibc check
gitignore: Add virtfs-proxy-helper
arm_gic: Add cpu nr to Raised IRQ message
zynq_slcr: Compile time warning fixes.
pflash_cfi0x: Send debug messages to stderr
pflash_cfi01: qemu_log_mask "unimplemented" msg
net, hub: fix the indent in the comments
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* amit/master:
virtio-serial-bus: assert port is non-null in remove_port()
virtio-serial-bus: send_control_msg() should not deal with cpkts
virtio-serial: delete timer if active during exit
virtio-serial: allocate post_load only at load-time
virtio-serial: move active ports loading to separate function
virtio-serial: use uint32_t to count ports
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* spice/spice.v66:
docs: add spice-port-fqdn.txt
spice-qemu-char: register spicevmc ports during qemu_spice_init()
spice-qemu-char: keep a list of spice chardev
spice-qemu-char: add spiceport chardev
spice-qemu-char: factor out CharDriverState creation
spice-qemu-char: write to chardev whatever amount it can read
qxl+vnc: register a vm state change handler for dummy spice_server
qxl: save qemu_create_displaysurface_from result
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 069ab0eb added a vmmouse_disable() call to vmmouse_reset().
vmmouse_disable() resets the status already.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add the relevant CPU nr to this debug message to make IRQ debugging more
informative.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Few warnings when compiled with debug printfs enabled. Fixed all.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These debug info messages should go to stderr rather than stdout.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This printf is informing the user of unimplemented functionality. It should be
re-directed to qemu_log(LOG_UNIMP, ...) accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
remove_port() is called from qdev's unplug callback, and we're certain
the port will be found in our list of ports. Adding an assert()
documents this.
This was flagged by Coverity, fix suggested by Markus.
CC: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Stuff the cpkt before calling send_control_msg(). This function should
not be concerned about contents of the buffer it receives.
A few code refactorings recently have made making this change easier
than earlier.
Coverity and clang have flagged this code several times in the past
(cpkt->id not set before send_control_event() passed it on to
send_control_msg()). This will finally eliminate the false-positive.
CC: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This patch corresponds to commit
840184a106bc24e745beda5c77e392f6cecd2bc9 from
git://xenbits.xensource.com/qemu-xen-unstable.git.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
