Enable KVM if the host and target CPU are both aarch64. Note
that host aarch64 + target arm is not valid for KVM acceleration:
the 64 bit kernel does not support the ioctl interface for
32 bit CPUs. 32 bit VMs on 64 bit hosts need to be created
using the 64 bit ioctl interface; when QEMU supports this it
will be on the arch64-softmmu target with a -cpu parameter for
a 32 bit CPU, which is still an aarch64/aarch64 combination
as far as configure is concerned.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-5-git-send-email-peter.maydell@linaro.org
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
# By Paolo Bonzini (4) and Peter Lieven (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
help: add id suboption to -iscsi
scsi-disk: fix WRITE SAME with large non-zero payload
block/iscsi: introduce bdrv_co_{readv, writev, flush_to_disk}
scsi-disk: fix VERIFY emulation
scsi-bus: fix transfer length and direction for VERIFY command
Message-id: 1386594157-17535-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This patch adds support for a network backend based on netmap.
netmap is a framework for high speed packet I/O. You can use it
to build extremely fast traffic generators, monitors, software
switches or network middleboxes. Its companion software switch
VALE lets you interconnect virtual machines.
netmap and VALE are implemented as a non-intrusive kernel module,
support NICs from multiple vendors, are part of standard FreeBSD
distributions and available in source format for Linux too.
To compile QEMU with netmap support, use the following configure
options:
./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys
where "/path/to/netmap" contains the netmap source code, available at
http://info.iet.unipi.it/~luigi/netmap/
The same webpage contains more information about the netmap project
(together with papers and presentations).
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this converts read, write and flush functions from aio to coroutines
eliminating almost 200 lines of code.
The requirement for libiscsi is bumped to version 1.4.0 which was
released in may 2012.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This has a fix for a crasher bug with pci bridges,
boot failure fix for s390 on 32 bit hosts,
and fixes build for hosts with old glib.
There's also a fix for --iasl configure flag - it can be used
to work around broken iasl on some systems either
by using a non-standard iasl or by disabling it.
I've also reverted a e1000/rtl mac programming change
that seems slightly wrong and too risky for 1.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSkzcXAAoJECgfDbjSjVRprVkIAJI0t8gfgichVVthsXPjCEI+
WlibVjN+BDt0S/y8sb5H43JAJS9JN6myi9rSNc2t2bdEynVJEDpGL9BZG/9RMjZ3
ekhyQsDVu8jzAseiFicBTtHt31RSjSyGsTAFks28FaB2p3DxYT6DY2enJ4CrtLR0
CCqMmvBWJY/hLjdiuYyuAKNrTSKkmdlddUWJyI5lWXJQbP6dx3cjF6OrUnCngBFG
TJ6Oh9lWC2IWf86P+73JtwpkTkm41shyMBz4MTAY0AvriKBzn27qTrP9BwL5rfaM
Tsaoc9Y81+4bd5EiDo3NpA2pAyCF9H+oeR1Zblce6p60wOKKfGvwT65KOH7fc1M=
=bdsX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc very last minute fixes for 1.7
This has a fix for a crasher bug with pci bridges,
boot failure fix for s390 on 32 bit hosts,
and fixes build for hosts with old glib.
There's also a fix for --iasl configure flag - it can be used
to work around broken iasl on some systems either
by using a non-standard iasl or by disabling it.
I've also reverted a e1000/rtl mac programming change
that seems slightly wrong and too risky for 1.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 25 Nov 2013 03:40:07 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (5) and Bandan Das (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
configure: make --iasl option actually work
Revert "e1000/rtl8139: update HMP NIC when every bit is written"
acpi-build: fix build on glib < 2.14
acpi-build: fix build on glib < 2.22
pci: unregister vmstate_pcibus on unplug
s390x: fix flat file load on 32 bit systems
Message-id: 1385379990-32093-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
--iasl option was added to CC option parsing section by mistake,
it's not effective there and attempts to use cause
an 'unknown option' error.
Fix this up.
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Our rules.mak adds '-rR' to MAKEFLAGS to indicate that we will be
explicitly specifying everything and not relying on any default
variables or rules. However we were accidentally relying on the
default ARFLAGS ("rv"). This went unnoticed because of a bug in
GNU Make 3.82 and earlier which meant that adding -rR to MAKEFLAGS
only affected submakes, not the currently running instance.
Explicitly set ARFLAGS in config-host.mak, in the same way we
handle CFLAGS and LDFLAGS; this will allow us to work with
Make 4.0.
Thanks to Paul Smith for analyzing this bug for us.
Cc: qemu-stable@nongnu.org
Reported-by: Ken Moffat <zarniwhoop@ntlworld.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Jan Krupa (4) and others
# Via Michael Tokarev
* mjt/trivial-patches:
hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently
configure: Use -B switch only for Python versions which support it
qga: Fix shutdown command of guest agent to work with SysV
console: Remove unused debug code
qga: Fix compilation for old versions of MinGW
.travis.yml: basic compile and check recipes
pci-assign: Fix error_report of pci-stub message
qapi: Fix comment for create-type to match code.
vl: fix build when configured with no graphic support
usb: drop unused USBNetState.inpkt field
qemu-char: add missing characters used in keymaps
qemu-char: add support for U-prefixed symbols
qemu-char: add Czech keymap file
qemu-char: add Czech characters to VNC keysyms
Message-id: 1384684850-6777-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Commit 1d984a67a9 added the -B switch
unconditionally. This breaks Python versions before 2.6 which don't
support that switch.
Now configure adds -B only if it is accepted by the Python interpreter.
This modification introduces a small incompatibility because -B might now
also be added when configure was called with --python=PYTHON_INTERPRETER.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
# By Jeff Cody (26) and others
# Via Stefan Hajnoczi
* stefanha/block: (37 commits)
block: Round up total_sectors
block: vhdx qemu-iotest - log replay of data sector
block: qemu-iotests for vhdx, add write test support
block: vhdx - update _make_test_img() to filter out vhdx options
block: vhdx - add .bdrv_create() support
block: vhdx - fix comment typos in header, fix incorrect struct fields
block: vhdx - break out code operations to functions
block: vhdx - move more endian translations to vhdx-endian.c
block: vhdx - remove BAT file offset bit shifting
block: vhdx write support
block: vhdx - add log write support
block: vhdx - add region overlap detection for image files
block: vhdx - log parsing, replay, and flush support
block: vhdx code movement - move vhdx_close() above vhdx_open()
block: vhdx - update log guid in header, and first write tracker
block: vhdx - break endian translation functions out
block: vhdx - log support struct and defines
block: vhdx code movement - VHDXMetadataEntries and BDRVVHDXState to header.
block: vhdx - add header update capability.
block: vhdx - minor comments and typo correction.
...
Message-id: 1383905551-16411-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This adds the ability to update the headers in a VHDX image, including
generating a new MS-compatible GUID.
As VHDX depends on uuid.h, VHDX is now a configurable build option. If
VHDX support is enabled, that will also enable uuid as well. The
default is to have VHDX enabled.
To enable/disable VHDX: --enable-vhdx, --disable-vhdx
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The latest configure invocation was saved in config-host.mak and could
be extracted from that file to recreate the configuration.
Now it is saved in a new file config.status which can be directly executed
to recreate the configuration. The file name and the comments were copied
from GNU autoconf.
Makefile now uses config.status, but also includes transitional code
for the old mechanism.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Fam Zheng <famz@redhat.com>
This avoids needing to execute a program and keeping an (incomplete)
list when cross-compiling.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-id: 1372649418-4987-1-git-send-email-vapier@gentoo.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
/iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
=CVfs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony: (39 commits)
ssdt-proc: update generated file
ssdt: fix PBLK length
i386: ACPI table generation code from seabios
pc: use new api to add builtin tables
acpi: add interface to access user-installed tables
hpet: add API to find it
pvpanic: add API to access io port
ich9: APIs for pc guest info
piix: APIs for pc guest info
acpi/piix: add macros for acpi property names
i386: define pc guest info
loader: allow adding ROMs in done callbacks
i386: add bios linker/loader
loader: use file path size from fw_cfg.h
acpi: ssdt pcihp: updat generated file
acpi: pre-compiled ASL files
acpi: add rules to compile ASL source
i386: add ACPI table files from seabios
q35: expose mmcfg size as a property
q35: use macro for MCFG property name
...
Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
In some cases when building with parallelism (make -jN),
build fails because the directory where output files are
supposed to be does not exist. In particular, when make
decides to build virtfs-proxy-helper.1 before other files
in fsdev/, build will fail with the following error:
perl -Ww -- BUILDDIR/scripts/texi2pod.pl BUILDDIR/fsdev/virtfs-proxy-helper.texi fsdev/virtfs-proxy-helper.pod && pod2man --utf8 --section=1 --center=" " --release=" " fsdev/virtfs-proxy-helper.pod > fsdev/virtfs-proxy-helper.1
opening "fsdev/virtfs-proxy-helper.pod": No such file or directory
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Detect presence of IASL compiler and use it
to process ASL source. If not there, use pre-compiled
files in-tree. Add script to update the in-tree files.
Note: distros are known to silently update iasl
so detect correct iasl flags for the installed version on each run as
opposed to at configure time.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Richard Henderson (19) and Paolo Bonzini (2)
# Via Richard Henderson
* rth/tcg-ppc-pull: (21 commits)
tcg-ppc64: Implement CONFIG_QEMU_LDST_OPTIMIZATION
tcg-ppc64: Add _noaddr functions for emitting forward branches
tcg-ppc64: Streamline tcg_out_tlb_read
tcg-ppc64: Implement tcg_register_jit
tcg-ppc64: Handle long offsets better
tcg-ppc64: Tidy register allocation order
tcg-ppc64: Look through a constant function descriptor
tcg-ppc64: Fold constant call address into descriptor load
tcg-ppc64: Don't load the static chain from TCG
tcg-ppc64: Avoid code for nop move
tcg-ppc64: Use tcg_out64
tcg-ppc64: Use TCG_REG_Rn constants
tcg-ppc64: More use of TAI and SAI helper macros
tcg-ppc64: Reformat tcg-target.c
tcg-ppc: Fix and cleanup tcg_out_tlb_check
tcg-ppc: Use conditional branch and link to slow path
tcg-ppc: Cleanup tcg_out_qemu_ld/st_slow_path
tcg-ppc: Avoid code for nop move
tcg-ppc: use new return-argument ld/st helpers
tcg-ppc: fix qemu_ld/qemu_st for AIX ABI
...
Message-id: 1380126458-3247-1-git-send-email-rth@twiddle.net
# By Bandan Das (3) and Gerd Hoffmann (1)
# Via Gerd Hoffmann
* kraxel/audio.1:
audio: remove CONFIG_MIXEMU configure option
hda-codec: make mixemu selectable at runtime
hda-codec: refactor common definitions into a header file
audio maintainers update
Message-id: 1380011943-15083-1-git-send-email-kraxel@redhat.com
# By Stefan Weil (8) and others
# Via Michael Tokarev
* mjt/trivial-patches:
tests/.gitignore: ignore test-throttle
exec: Fix broken build for MinGW (regression)
kvm: Fix compiler warning (clang)
tcg-sparc: Fix parenthesis warning
Makefile: Remove some more files when cleaning
target-i386: Fix segment cache dump
iov: avoid "orig_len may be used unitialized" warning
vscclient: remove unnecessary use of uninitialized variable
trace-events: Clean up with scripts/cleanup-trace-events.pl again
tci: Fix qemu-alpha on 32 bit hosts (wrong assertions)
*-user: Improve documentation for lock_user function
MAINTAINERS: Add missing entry to filelist for TCI target
translate-all: Fix formatting of dump output
*-user: Fix typo in comment (ulocking -> unlocking)
docs: Fix IO port number for CPU present bitmap.
q35: Fix typo in constant DEFUALT -> DEFAULT.
configure: Undefine _FORTIFY_SOURCE prior using it
Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
Currently, we are enforcing the _FORTIFY_SOURCE=2 without any
previous detection if the macro has been already defined, e.g.
by environment, or is just enabled by compiler by default.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The usb-host code has been rewritten for qemu 1.5 to use libusb,
the old code has been left in as temporary fallback. Now we are
two releases further out, targeting the 1.7 release. No major
issues with the new code poped up until now. Time to remove it
from tre tree. Should we ever need it again for some reason --
git has a copy for us in the history.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'gthread' coroutine backend was written before the freelist (aka
pool) existed in qemu-coroutine.c.
This means that every thread is expected to exit when its coroutine
terminates. It is not possible to reuse threads from a pool.
This patch automatically disables the pool when 'gthread' is used. This
allows the 'gthread' backend to work again (for example,
tests/test-coroutine completes successfully instead of hanging).
I considered implementing thread reuse but I don't want quirks like CPU
affinity differences due to coroutine threads being recycled. The
'gthread' backend is a reference backend and it's therefore okay to skip
the pool optimization.
Note this patch also makes it easy to toggle the pool for benchmarking
purposes:
./configure --with-coroutine-backend=ucontext \
--disable-coroutine-pool
Reported-by: Gabriel Kerneis <gabriel@kerneis.info>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Gabriel Kerneis <gabriel@kerneis.info>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This program can do a sendmsg call to transfer fd with unix
socket, which is not supported in python2.
The built binary will not be deleted in clean, but it is a
existing issue in ./tests, which should be solved in another
patch.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* aarch64 preparation patchset (excluding the defconfigs, so this
doesn't actually enable the new targets yet)
* minor bugfixes and cleanups
* disable "-cpu any" in system emulation mode
* fix ARMv7M stack alignment on reset
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=oraU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20130910' into staging
ARM queue:
* aarch64 preparation patchset (excluding the defconfigs, so this
doesn't actually enable the new targets yet)
* minor bugfixes and cleanups
* disable "-cpu any" in system emulation mode
* fix ARMv7M stack alignment on reset
# gpg: Signature made Tue 10 Sep 2013 01:46:11 PM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
# By Alexander Graf (13) and others
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20130910: (28 commits)
configure: Add handling code for AArch64 targets
linux-user: Add AArch64 support
linux-user: Allow targets to specify a minimum uname release
linux-user: Add AArch64 termbits.h definitions
linux-user: Implement cpu_set_tls() and cpu_clone_regs() for AArch64
linux-user: Make sure NWFPE code is 32 bit ARM only
linux-user: Add signal handling for AArch64
linux-user: Fix up AArch64 syscall handlers
linux-user: Add syscall number definitions for AArch64
linux-user: Add cpu loop for AArch64
linux-user: Don't treat AArch64 cpu names specially
target-arm: Add AArch64 gdbstub support
target-arm: Add AArch64 translation stub
target-arm: Prepare translation for AArch64 code
target-arm: Disable 32 bit CPUs in 64 bit linux-user builds
target-arm: Add new AArch64CPUInfo base class and subclasses
target-arm: Pass DisasContext* to gen_set_pc_im()
target-arm: Fix target_ulong/uint32_t confusions
target-arm: Export cpu_env
target-arm: Extract the disas struct to a header file
...
Message-id: 1378839142-7726-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Add the necessary code to configure to handle AArch64 as a target
CPU (we already have some code for supporting it as host). Note
that this doesn't enable the AArch64 targets yet.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-23-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-12-git-send-email-john.rigby@linaro.org
[PMM:
* don't need to set TARGET_ABI_DIR to aarch64 as that is the default
* don't build nwfpe -- this is 32 bit legacy only
* rewrite commit message
* add aarch64 to the list of "fdt required" targets
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds VSS provider and requester as a qga-vss.dll, which is loaded by
Windows VSS service as well as by qemu-ga.
"provider.cpp" implements a basic stub of a software VSS provider.
Currently, this module only relays a frozen event from VSS service to the
agent, and thaw event from the agent to VSS service, to block VSS process
to keep the system frozen while snapshots are taken at the host.
To register the provider to the guest system as COM+ application, the type
library (.tlb) for qga-vss.dll is required. To build it from COM IDL (.idl),
VisualC++, MIDL and stdole2.tlb in Windows SDK are required. This patch also
adds pre-compiled .tlb file in the repository in order to enable
cross-compile qemu-ga.exe for Windows with VSS support.
"requester.cpp" provides the VSS requester to kick the VSS snapshot process.
Qemu-ga.exe works without the DLL, although fsfreeze features are disabled.
These functions are only supported in Windows 2003 or later. In older
systems, fsfreeze features are disabled.
In several versions of Windows which don't support attribute
VSS_VOLSNAP_ATTR_NO_AUTORECOVERY, DoSnapshotSet fails with error
VSS_E_OBJECT_NOT_FOUND. In this patch, we just ignore this error.
To solve this fundamentally, we need a framework to handle mount writable
snapshot on guests, which is required by VSS auto-recovery feature
(cleanup phase after a snapshot is taken).
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
To enable VSS support in qemu-ga for Windows, header files included in
VSS SDK are required.
The VSS support is enabled by the configure option like below:
./configure --with-vss-sdk="/path/to/VSS SDK"
If the path is omitted, it tries to search the headers from default paths
and VSS support is enabled only if the SDK is found.
VSS support is disabled if --without-vss-sdk or --with-vss-sdk=no is
specified.
VSS SDK is available from:
http://www.microsoft.com/en-us/download/details.aspx?id=23490
To cross-compile using mingw, you need to setup the SDK on Windows
environments to extract headers. You can also extract the SDK headers on
POSIX environments using scripts/extract-vss-headers and msitools.
In addition, --with-win-sdk="/path/to/Windows SDK" option is also added to
specify path to Windows SDK, which may be used for native-compile of .tlb
file of qemu-ga VSS provider. However, this is usually unnecessary because
pre-compiled .tlb file is included.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add configuration for C++ compiler in configure and Makefiles.
The C++ compiler is choosed as following:
- ${CXX}, if it is specified.
- ${cross_prefix}g++, if ${cross_prefix} is specified.
- Otherwise, c++ is used.
Currently, usage of C++ language is only for access to Windows VSS
using COM+ services in qemu-guest-agent for Windows.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Micael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
# By Stefan Weil (6) and others
# Via Michael Tokarev
* mjt/trivial-patches:
aio / timers: use g_usleep() not sleep()
adlib: sort offsets in portio registration
qmp: fix integer usage in examples
tci: Remove function tcg_out64 (fix broken build)
target-arm: Report unimplemented opcodes (LOG_UNIMP)
pflash_cfi02.c: fix debug macro
configure: Remove unneeded redirections of stderr (pkg-config --exists)
configure: Remove unneeded redirections of stderr (pkg-config --cflags, --libs)
configure: Don't write .pyc files by default (python -B)
curl: qemu_bh_new() can never return NULL
slirp/arp_table.c: Avoid shifting into sign bit of signed integers
configure: disable clang -Wstring-plus-int warning
rdma: silly ipv6 bugfix
misc: Fix some typos in names and comments
slirp: Port redirection option behave differently on Linux and Windows
Message-id: 1378119695-14568-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Predicate options (--exists, --atleast-version, ...) of pkg-config dont't
print error messages to stderr, so redirecting stderr is not necessary.
Combining a predicate option with --modversion is not necessary for tests.
Instead of testing with --modversion, --exists can be used.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For existing libraries, pkg-config --cflags and pkg-config --libs won't
print error messages to stderr, so redirecting stderr is not necessary.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When a Python script is run, Python normally writes bytecode into a .pyc file.
QEMU's build process uses several Python scripts which are called from
configure or make.
The generated .pyc files take disk space without being of much use, because
those scripts are short, not time critical and only called a few times.
Python's option -B disables writing of .pyc files. QEMU now uses "python -B"
as default, but it is still possible to choose a different call by passing
--python=PYTHON to configure.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some versions of clang will warn about adding integers to strings:
disas/i386.c:4753:23: error: adding 'char' to a string does not append
to the string [-Werror,-Wstring-plus-int]
oappend ("%es:" + intel_syntax);
~~~~~~~^~~~~~~~~~~~~~
disas/i386.c:4753:23: note: use array indexing to silence this warning
oappend ("%es:" + intel_syntax);
^
& [ ]
disas/i386.c uses this idiom to to skip a "%" prefix if using intel
rather than AT&T syntax. This seems like a reasonable thing to do,
and I don't think anybody contributing to QEMU is likely to believe
that '+' is a string concatenation operator in C, so just disable
-Wstring-plus-int.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Where supported, called prctl(PR_SET_TIMERSLACK, 1, ...) to
set one nanosecond timer slack to increase precision of timer
calls.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add qemu_poll_ns which works like g_poll but takes a nanosecond
timeout.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move qemu-ga build check out of if softmmu.. into its own section.
We want to build qemu-ga for _guest_ even if system build isn't
done. It is controlled separately using --enable-guest-agent.
Additionally, give error message if guest agent is requested but
not supported.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The parser handles erroneous input badly. To be improved shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1374939721-7876-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
v2 update:
- set libseccomp 2.1.0 as requirement on configure script.
Since libseccomp 2.0 there's no need to check the architecture type
anymore.
Signed-off-by: Eduardo Otubo <otubo@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1374518017-10424-2-git-send-email-otubo@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* riku/linux-user-for-upstream: (21 commits)
linux-user: Handle compressed ISA encodings when processing MIPS exceptions
linux-user: Unlock mmap_lock when resuming guest from page_unprotect
linux-user: Reset copied CPUs in cpu_copy() always
linux-user: Fix epoll on ARM hosts
linux-user: fix segmentation fault passing with h2g(x) != x
linux-user: Fix pipe syscall return for SPARC
linux-user: Fix target_stat and target_stat64 for OpenRISC
linux-user: Avoid conditional cpu_reset()
configure: Make NPTL non-optional
linux-user: Enable NPTL for x86-64
linux-user: Add i386 TLS setter
linux-user: Clean up handling of clone() argument order
linux-user: Add missing 'break' in i386 get_thread_area syscall
linux-user: Enable NPTL for m68k
linux-user: Enable NPTL for SPARC targets
linux-user: Enable NPTL for OpenRISC
linux-user: Move includes of target-specific headers to end of qemu.h
configure: Enable threading for unicore32-linux-user
configure: Enable threading on all ppc and mips linux-user targets
configure: Don't say target_nptl="no" if there is no linux-user target
...
Conflicts:
linux-user/main.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Code that does need to be visible is kept
well contained inside this file and this is the only
new additional file to the entire patch.
This file includes the entire protocol and interfaces
required to perform RDMA migration.
Also, the configure and Makefile modifications to link
this file are included.
Full documentation is in docs/rdma.txt
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
