Suppress rbd progress messages with --no-progress so they are not
confused with an error output when comparing test results ( progress is
displayed on stderr ).
Signed-off-by: Loic Dachary <loic@dachary.org>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If TMPDIR is not specified, the default was to use /tmp for the working
copy of the block devices. Update this to /var/tmp instead, so systems
using tmp-on-tmpfs don't end up inadvertently using RAM for the block
device.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Quorum is not compiled by default: make the quorum 081 test aware of this.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Insert quorum QMP events documentation alphabetically.
Also change the "ret" errno value by an optional "error" being an strerror(-ret)
in the QUORUM_REPORT_BAD qmp event.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fix some nits before QEMU 2.0 freeze.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Gluster does parse open flags in its .bdrv_open() implementation,
and the .bdrv_reopen_* implementations need to do the same.
A new gluster connection to the image file to be created is established
in the .bdrv_reopen_prepare(), and the image file opened with the new
flags.
If this is successful, then the old image file is closed, and the
old connection torn down. The relevant structure pointers in the gluster
state structure are updated to the new connection.
If it is not successful, then the new file handle and connection is
abandoned (if it exists), while the old connection is not modified at
all.
With reopen supported, block-commit (and offline commit) is now also
supported for image files whose base image uses the native gluster
protocol driver.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In preparation for supporting reopen on gluster, move flag
parsing out to a function. Also, add a NULL check in the
gconf cleanup.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
None of these needs QEMU_PROG, and they all take but a few seconds.
We need to point the launching script to qemu-nbd, though.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
'query-dump-guest-memory-capability' is used to query the available formats for
'dump-guest-memory'. The output of the command will be like:
-> { "execute": "query-dump-guest-memory-capability" }
<- { "return": { "formats":
["elf", "kdump-zlib", "kdump-lzo", "kdump-snappy"] }
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Make monitor command 'dump-guest-memory' be able to dump in kdump-compressed
format. The command's usage:
dump [-p] protocol [begin] [length] [format]
'format' is used to specified the format of vmcore and can be:
1. 'elf': ELF format, without compression
2. 'kdump-zlib': kdump-compressed format, with zlib-compressed
3. 'kdump-lzo': kdump-compressed format, with lzo-compressed
4. 'kdump-snappy': kdump-compressed format, with snappy-compressed
Without 'format' being set, it is same as 'elf'. And if non-elf format is
specified, paging and filter is not allowed.
Note:
1. The kdump-compressed format is readable only with the crash utility and
makedumpfile, and it can be smaller than the ELF format because of the
compression support.
2. The kdump-compressed format is the 6th edition.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
functions are used to write page to vmcore. vmcore is written page by page.
page desc is used to store the information of a page, including a page's size,
offset, compression format, etc.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
DataCache is used to store data temporarily, then the data will be written to
vmcore. These functions will be called later when writing data of page to
vmcore.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
functions are used to write 1st and 2nd dump_bitmap of kdump-compressed format,
which is used to indicate whether the corresponded page is existed in vmcore.
1st and 2nd dump_bitmap are same, because dump level is specified to 1 here.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
the functions are used to write header of kdump-compressed format to vmcore.
Header of kdump-compressed format includes:
1. common header: DiskDumpHeader32 / DiskDumpHeader64
2. sub header: KdumpSubHeader32 / KdumpSubHeader64
3. extra information: only elf notes here
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
add some members to DumpState that will be used in writing vmcore in
kdump-compressed format. some of them, like page_size, will be initialized
in the patch.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
kdump-compressed format supports three compression format, zlib/lzo/snappy.
Currently, only zlib is available. This patch is used to support lzo/snappy.
'--enable-lzo/--enable-snappy' is needed to be specified with configure to make
lzo/snappy available for qemu
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
the function can be used by write_elf32_notes/write_elf64_notes to write notes
to a buffer. If fd_write_vmcore is used, write_elf32_notes/write_elf64_notes
will write elf notes to vmcore directly. Instead, if buf_write_note is used,
elf notes will be written to opaque->note_buf at first.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Function is used to write vmcore in flatten format. In flatten format, data is
written block by block, and in front of each block, a struct
MakedumpfileDataHeader is stored there to indicate the offset and size of the
data block.
struct MakedumpfileDataHeader {
int64_t offset;
int64_t buf_size;
};
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
flatten format will be used when writing kdump-compressed format. The format is
also used by makedumpfile, you can refer to the following URL to get more
detailed information about flatten format of kdump-compressed format:
http://sourceforge.net/projects/makedumpfile/
The two functions here are used to write start flat header and end flat header
to vmcore, and they will be called later when flatten format is used.
struct MakedumpfileHeader stored at the head of vmcore is used to indicate the
vmcore is in flatten format.
struct MakedumpfileHeader {
char signature[16]; /* = "makedumpfile" */
int64_t type; /* = 1 */
int64_t version; /* = 1 */
};
And struct MakedumpfileDataHeader, with offset and buf_size set to -1, is used
to indicate the end of vmcore in flatten format.
struct MakedumpfileDataHeader {
int64_t offset; /* = -1 */
int64_t buf_size; /* = -1 */
};
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
write_elf32_notes/wirte_elf64_notes use fd_write_vmcore to write elf notes to
vmcore. Adding parameter "WriteCoreDumpFunction f" makes it available to choose
the method of writing elf notes
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
WriteCoreDumpFunction is a function pointer that points to the function used to
write content in "buf" into core file, so "buf" should be const-qualify.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We were loading 16 bytes for both single and double-precision
scalar comparisons.
Reported-by: Alexander Bluhm <bluhm@openbsd.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
When we restore the mxcsr register with FXRSTOR, or set it with gdb,
we need to update the various SSE status flags in CPUX86State
Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Parity should be set for a zero result.
Cc: qemu-stable@nongnu.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This commit updates the status for the HMP, QAPI and QMP trees from
"Supported" to "Maintained".
In practice this means that patch review and pull requests may take
longer. Also, I'll rely more on reviewers such as Eric Blake so that
I'm able to send pull requests regularly.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
As another convenience to allow using commands that expect a dict as
argument, this patch adds support for foo.bar=value syntax, similar to
command line argument style:
(QEMU) blockdev-add options.driver=file options.id=drive1 options.filename=...
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Compiling util/modules.c with modules enabled fails now.
Fix it by including qemu-common.h before #ifdef testing in module.c.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1393453893-12125-1-git-send-email-famz@redhat.com
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to allow the user to choose the framebuffer for sparc-softmmu, add
-vga tcx and -vga cg3 options to the QEMU command line. If no option is
specified, the default TCX framebuffer is used.
Since proprietary FCode ROMs use a resolution of 1152x900, slightly relax the
validation rules to allow both displays to be initiated at the higher
resolution used by these ROMs upon request (OpenBIOS FCode ROMs default to
the normal QEMU sun4m default resolution of 1024x768).
Finally move any fprintf(stderr ...) statements in the areas affected by this
patch over to the new error_report() function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
The CG3 framebuffer is a simple 8-bit framebuffer for use with operating
systems such as early Solaris that do not have drivers for TCX.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
The sun4m architecture has one 'system' timer and one timer per CPU.
The CPU timers can be configured in two modes:
* 22 bits Counter/Timer. Periodic interrupts.
* 54 bits User timer. For profiling. In this mode, the Run/Stop bit
controls the timer.
The run/stop bit controls the timer only when it is in "User" mode, but
its state shall be persistent.
Signed-off-by: Olivier Danet <odanet@caramail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
On SparcStations, the HostID field in the NVRAM is equal to the last
three bytes of the MAC address (which is also stored in the NVRAM).
This constant is used as an identification/serial number on Solaris.
Signed-off-by: Olivier Danet <odanet@caramail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
When loading S390 kernels, the current code expects an ELF file with the
start address 0x10000. Other ELF files cause a segmentation fault. To avoid
these crashes, we should get the start address from the ELF file instead
of always using a hard-coded address.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The current implementation uses the second byte of the instruction
to identify the instruction handler. This is not sufficient to
support instructions not starting with 0xb2. This patch
adds separate handlers for 0xb2, 0xb9 and 0xeb to be able to
support the full instruction set.
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The SIGP order CPU RESET was still missing in the list of our
supported handler. This patch now adds a simple implementation,
by using the cpu_reset() function that is already available in
target-s390x/cpu.c.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The s390_cpu_initial_reset() function had two deficiencies: First, it
used an ioctl for the destination CPU, and this ioctl could block
nearly forever, as long as the destination CPU was running in the SIE
loop. Second, it also cleared the general purpose registers - something
it should not do according to the Principles of Operations.
Since we've already got another function for the initial CPU reset in
cpu.c, we can also use that function instead. And by using run_on_cpu()
for executing this code, we make sure that the destination CPU is
correctly kicked out of kernel mode now.
Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Some of the state in the kernel can not be reset from QEMU yet.
For this we've got to use the KVM_S390_INITIAL_RESET ioctl to make
sure that the state in the kernel is set to the right values during
initial CPU reset, too.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We have to set the cssid to 0, otherwise the stsch code will
return an operand exception without the m bit. In the same way
we should set m=0.
This case was triggered in some cases during reboot, if for some
reason the location of blk_schid.cssid contains 1 and m was 0.
Turns out that the qemu elf loader does not zero out the bss section
on reboot.
The symptom was an dump of the old kernel with several areas
overwritten. The bootloader does not register a program check
handler, so bios exception jumped back into the old kernel.
Lets just use a local struct with a designed initializer. That
will guarantee that all other subelements are initialized to 0.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The current code does not initialize next_idx in the virtio ring.
As the ccw bios will always use guest memory at a fixed location,
this queue might != 0 after a reboot.
Lets make the initialization explicit.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
init/exit functionality of abstract SCLPEvent class is now exploiting
realize/unrealize.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add support for live migration using VMStateDescription.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Code restructure in order to simplify class hierarchy
- remove S390SCLPDevice abstract base class
and move function pointers into new SCLPEventFacilityClass
- implement SCLPEventFacility as SysBusDevice
- use define constants for instance creation strings
The following ascii-art shows the class structure wrt the SCLP EventFacility
before (CURRENT) and after the restructure (NEW):
----
CURRENT:
"s390-sclp-events-bus"
+-------------------------+
| SCLPEventsBus |
|-------------------------|
|BusState qbus |
+-------------------------+
+-------------------------+
| SCLPEventFacility | - to be replaced by new SCLPEventFacility,
|-------------------------| which will be a SysBusDevice
|SCLPEventsBus sbus |
|DeviceState *qdev |
|unsigned int receive_mask|
+-------------------------+
+-------------------------+
| S390SCLPDeviceClass | - to be replaced by new SCLPEventFacilityClass
|-------------------------|
|DeviceClass qdev |
|*(init)() |
+-------------------------+
"s390-sclp-event-facility"
|
instance-of
|
V
"s390-sclp-device" - this is an abstract class
+-------------------------+
| S390SCLPDevice (A)| - to be replaced by new SCLPEventFacility
|-------------------------|
|SysBusDevice busdev |
|SCLPEventFacility *ef |
| |
|*(sclp_command_handler)()| - these 2 go to new SCLPEventFacilityClass
|*(event_pending)() |
+-------------------------+
----
NEW:
"s390-sclp-events-bus"
+-------------------------+
| SCLPEventsBus |
|-------------------------|
|BusState qbus |
+-------------------------+
+-------------------------+
| SCLPEventFacilityClass |
|-------------------------|
|DeviceClass parent_class |
| |
|*(init)() |
|*(command_handler)() |
|*(event_pending)() |
+-------------------------+
"s390-sclp-event-facility"
+-------------------------+
| SCLPEventFacility |
|-------------------------|
|SysBusDevice parent_class|
|SCLPEventsBus sbus |
|unsigned int receive_mask|
+-------------------------+
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Do some renaming to shorten some identifiers and to emphasize sclp.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In the SCLP handler function, the condition code register must
only be set if no exception occured.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the 51 most significant bits of the SCCB address are zero or equal to
the prefix, we should throw an specification exception, too.
Also moved the check for privileged mode to sclp_service_call() to have
all program checks in one place now.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The pointer to the SCCB should not be limited to 32 bits only.
In contrast to this, the command word parameter is only 32 bits
(the upper 32 bits should be ignored).
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
As a followup to commit 5f04c14a10
(s390-sclp: Define New SCLP Codes) we should mask the sclp command
not only in base sclp, but also in the event facility.
Based on an initial patch from Ralf Hoppe.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
