This checks that s->chr is not NULL before using it.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We keep port 0 reserved for compat with older guests, where only
virtio-console was expected. Even if a system is started without a
virtio-console port, port #0 is kept aside. However, after a
virtconsole port is unplugged, port id 0 became available, and the next
hotplug of a virtserialport caused failure due to it not being a console
port.
Steps to reproduce:
$ ./x86_64-softmmu/qemu-system-x86_64 -m 512 -cpu host -enable-kvm -device virtio-serial-pci -monitor stdio -vnc :1
QEMU 2.0.91 monitor - type 'help' for more information
(qemu) device_add virtconsole,id=p1
(qemu) device_del p1
(qemu) device_add virtserialport,id=p1
Port number 0 on virtio-serial devices reserved for virtconsole devices for backward compatibility.
Device 'virtserialport' could not be initialized
(qemu) quit
Reported-by: dengmin <mdeng@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Whenever serial_xmit fails to transmit a byte it adds a watch that would
call it again when the "line" becomes ready. This results in a retry
chain:
serial_xmit -> add_watch -> serial_xmit
Each chain is able to transmit one character, and for every character
passed to serial by the guest driver a new chain is spawned.
The problem lays with the fact that a new chain is spawned even when
there is one already waiting on the watch. So there can be several retry
chains waiting concurrently on one "line". Every chain tries to transmit
current character, so character order is not messed up. But also every
chain increases retry counter (tsr_retry). If there are enough
concurrent chains this counter will hit MAX_XMIT_RETRY value and
the character will be dropped.
To reproduce this bug you need to feed serial output to some program
consuming it slowly enough. A python script from bug #1335444
description is an example of such program.
This commit changes retry logic in the following way to avoid
concurrency: instead of spawning a new chain for each character being
transmitted spawn only one and make it transmit characters until FIFO is
empty.
The change consists of two parts:
- add a do {} while () loop in serial_xmit (diff is a bit erratic
for this part, diff -w will show actual change),
- do not call serial_xmit from serial_ioport_write if there is one
waiting on the watch already.
This should fix another issue causing bug #1335444.
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocate each IRQ individually on array allocations. This prepares for
QOMification of IRQs, where pointers to individual IRQs may be taken
and handed around for usage as QOM Links. The g_renew() scheme used here
is too fragile and would break all existing links should an IRQ list
be extended.
We now have to pass the IRQ count to qemu_free_irqs(). We have so few
call sites however, so this change is reasonably trivial.
Cc: agarcia@igalia.com
Cc: mst@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
On FreeBSD polling a master pty while the other end is not connected
with G_IO_OUT only results in an endless wait. This is different from
the Linux behaviour, that returns immediately. In order to demonstrate
this, I have the following example code:
http://xenbits.xen.org/people/royger/test_poll.c
When executed on Linux:
$ ./test_poll
In callback
On FreeBSD instead, the callback never gets called:
$ ./test_poll
So, in order to workaround this, poll the source with G_IO_HUP (which
makes the code behave the same way on both Linux and FreeBSD).
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: xen-devel@lists.xenproject.org
[Add hw/char/cadence_uart.c too. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We also fix max_nr_ports at reset time as the device endianness may have
changed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
fix max_nr_ports at reset time,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to migrate virtio subsections, they should be streamed after
the device itself. We need the device specific code to be called from
the common migration code to achieve this. This patch introduces load
and save methods for this purpose.
Suggested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The device configuration is set at realize time and never changes. It
should not be migrated as it is done today. For the sake of compatibility,
let's just skip them at load time.
Signed-off-by: Alexander Graf <agraf@suse.de>
[ added missing casts to uint16_t *,
added From, SoB and commit message,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Libvirt wants to know about the guest-side connection state of some
virtio-serial ports (in particular the one(s) assigned to guest agent(s)).
Report such states with a new monitor event.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1080376
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Its only contents are a dead memcpy. Since it is optional,
drop the function altogether.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
SysBusDevice::init is depracated. Convert to Object::init and
Device::realize as prescribed by QOM conventions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This refresh of the device state is intended to be a reset side
effect. Move it to a proper reset handler rather than do it at
init time.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Nasty 0xe0 logic is gone. We map through QKeyCode now, giving us a
nice, readable mapping table.
Quick smoke test in OpenFirmware looks ok. Careful check from arch
maintainers would be very nice, especially on the capslock and numlock
logic. I'm not fully sure whenever I got it translated correctly and
also what it is supposed to do in the first place ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gg8m
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20140515' into staging
migration/next for 20140515
# gpg: Signature made Thu 15 May 2014 02:32:25 BST using RSA key ID 5872D723
# gpg: Can't check signature: public key not found
* remotes/juanquintela/tags/migration/20140515:
usb: fix up post load checks
migration: show average throughput when migration finishes
savevm: Remove all the unneeded version_minimum_id_old (rest)
savevm: Remove all the unneeded version_minimum_id_old (usb)
Split ram_save_block
arch_init: Simplify code for load_xbzrle()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
After commit 767adce2d, they are redundant. This way we don't assign them
except when needed. Once there, there were lots of cases where the ".fields"
indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (apart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM: fixed minor conflict, corrected commit message typos]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The commit 88c1ee73d3
char/serial: Fix emptyness check
Still causes extra NULL byte(s) to be sent.
So if the fifo is empty, do not send an extra NULL byte.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Message-id: 1395160174-16006-1-git-send-email-dslutz@verizon.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The receive fifo full bit should be set when 1 character is received and
the fifo is disabled or when 16 characters are in the fifo.
Signed-off-by: Rob Herring <rob.herring@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1395166721-15716-4-git-send-email-robherring2@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Offset 4 is UARTRSR/UARTECR, not the UARTCR. The UARTCR would be
corrupted if the UARTRSR is ever written. Fix by implementing a correct
model of the UARTRSR/UARTECR register. Reads of this register simply
reflect the error bits in data register. Only breaks can be triggered in
QEMU. With the pl011_can_receive function, we effectively have flow
control between the host and the model. Framing and parity errors simply
don't make sense in the model and will never occur.
Signed-off-by: Rob Herring <rob.herring@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1395166721-15716-3-git-send-email-robherring2@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Intermittent issues have been seen where no serial input occurs. It
appears the pl011 gets in a state where the rx interrupt never fires
because the rx interrupt only asserts when crossing the fifo trigger
level. The fifo state appears to get out of sync when the pl011 is
re-configured. This combined with the rx timeout interrupt not being
modeled results in no more rx interrupts.
Disabling the fifo is the recommended way to clear the tx fifo in the
TRM (section 3.3.8). The behavior in this case for the rx fifo is
undefined in the TRM, but having fifo contents to be maintained during
configuration changes is not likely expected behavior. Reseting the
fifo state when the fifo size is changed is the simplest solution.
Signed-off-by: Rob Herring <rob.herring@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1395166721-15716-2-git-send-email-robherring2@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
valgrind complains about a memory leak in irq setup of sclpconsole:
==42117== 8 bytes in 1 blocks are definitely lost in loss record 89of 833
==42117== at 0x4031AFE: malloc (vg_replace_malloc.c:292)
==42117== by 0x8022F855: malloc_and_trace (vl.c:2715)
==42117== by 0x4145569: g_malloc (in /usr/lib64/libglib-2.0.so.0.3400.2)
==42117== by 0x800F696D: qemu_extend_irqs (irq.c:51)
==42117== by 0x800F6AF7: qemu_allocate_irqs (irq.c:68)
==42117== by 0x800F5685: console_init (sclpconsole.c:235)
==42117== by 0x80297C79: event_realize (event-facility.c:386)
==42117== by 0x80105071: device_set_realized (qdev.c:693)
==42117== by 0x801CDC4B: property_set_bool (object.c:1337)
==42117== by 0x801CBD7F: object_property_set (object.c:819)
[...]
We dont need the indirection of an qemu irq to inject an slcp interrupt.
Fixes a valgrind error and makes the code simpler.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
valgrind complains about a memory leak in irq setup of sclpconsole:
==42117== 8 bytes in 1 blocks are definitely lost in loss record 89 of 833
==42117== at 0x4031AFE: malloc (vg_replace_malloc.c:292)
==42117== by 0x8022F855: malloc_and_trace (vl.c:2715)
==42117== by 0x4145569: g_malloc (in /usr/lib64/libglib-2.0.so.0.3400.2)
==42117== by 0x800F696D: qemu_extend_irqs (irq.c:51)
==42117== by 0x800F6AF7: qemu_allocate_irqs (irq.c:68)
==42117== by 0x800F5685: console_init (sclpconsole.c:235)
==42117== by 0x80297C79: event_realize (event-facility.c:386)
==42117== by 0x80105071: device_set_realized (qdev.c:693)
==42117== by 0x801CDC4B: property_set_bool (object.c:1337)
==42117== by 0x801CBD7F: object_property_set (object.c:819)
[...]
Turns out that we actually dont need the indirection, so trigger the
sclp interrupt directly.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Commit 0399a3819b (virtio-console: QOM
cast cleanup for VirtConsole) broke virtserialport since it shares
functions and state struct with virtconsole. Let virtconsole inherit
from virtserialport, and use virtserialport type for casting.
Note that virtio-serial-port is the abstract base type in
virtio-serial-bus.c, whereas virtserialport is the user-instantiatable
type in virtio-console.c. Therefore using TYPE_VIRTIO_CONSOLE_SERIAL_PORT.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=KRcc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties
# gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter: (49 commits)
qtest: Include system headers before user headers
qapi: Refine human printing of sizes
qdev: Use QAPI type names for properties
qdev: Add enum property types to QAPI schema
block: Handle "rechs" and "large" translation options
qdev: Remove hex8/32/64 property types
qdev: Remove most legacy printers
qdev: Use human mode in "info qtree"
qapi: Add human mode to StringOutputVisitor
qdev: Inline qdev_prop_parse()
qdev: Legacy properties are just strings
qdev: Legacy properties are now read-only
qdev: Remove legacy parsers for hex8/32/64
qdev: Sizes are now parsed by StringInputVisitor
qapi: Add size parser to StringInputVisitor
qtest: Don't segfault with invalid -qtest option
ipack: Move IndustryPack out of hw/char/
ipoctal232: QOM parent field cleanup
ipack: QOM parent field cleanup for IPackDevice
ipack: QOM parent field cleanup for IPackBus
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This was guarding against a full fifo rather than an empty fifo when
popping. Fix.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace them with uint8/32/64.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move the header defining an IPackBus and IPackDevice base class into
a new include/ directory and move their implementation and a
PCI-IndustryPack bridge out of hw/char/ directory into a new hw/ipack/.
Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Clean up accesses to IPOctalState::dev field and rename it.
Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Rename the IPackDevice::qdev field to avoid accidental use.
Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Clean up the only user of IPackBus::qbus field and rename it.
Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
qemu_chr_fe_write() may return EAGAIN. Therefore, use
qemu_chr_fe_write_all().
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
qemu_chr_fe_write() is capable of returning 0
to indicate EAGAIN (and friends) and we don't
handle this.
Just change it to qemu_chr_fe_write_all() to fix.
Reported-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
* mjt/trivial-patches:
acpi unit-test: Remove temporary disk after test
mainstone: Fix duplicate array values for key 'space'
pxa27x: Add 'const' attribute to keyboard maps
pxa27x: Reduce size of keyboard matrix mapping
doc: Mention chardev:id in available devices for -serial
configure: Python tests must be done before help message
configure: Rewrite code for help message
fix -boot strict regressed in commit 6ef4716
vl: make boot_strict variable static (not used outside vl.c)
x86: only allow real mode to access 32bit without LMA
linux-user: Use macro TARGET_NSIG_WORDS where possible
exynos4210: Use macro ARRAY_SIZE where possible
ui/cocoa: Use macro ARRAY_SIZE where possible
misc: Use macro ARRAY_SIZE where possible
openrisc: Fix spelling in comment (transaltion -> translation)
hw/arm/highbank: Simplify code (memory region in device state)
Message-id: 1388182050-10270-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
If the UART back-end blocks, buffer in the Tx FIFO to try again later.
This stops the IO-thread busy waiting on char back-ends (which causes
all sorts of performance problems).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 4bea048b3ab38425701d82ccc1ab92545c26b79c.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The can_receive logic was only taking into account the RxFIFO
occupancy. RxFIFO population is only used for the echo and normal modes
however. Improve the logic to correctly return the true number of
receivable characters based on the current mode:
Normal mode: RxFIFO vacancy.
Remote loopback: TxFIFO vacancy.
Echo mode: The min of the TxFIFO and RxFIFO vacancies.
Local Loopback: Return non-zero (to implement droppage)
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 36a58440c9ca5080151e95765c2c81342de8a8df.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This tx timer implementation is flawed. Despite the controller
attempting to time the guest visable assertion of the TX-empty status
bit (and corresponding interrupt) the controller is still transmitting
characters instantaneously. There is also no sense of multiple character
delay.
The only side effect of this timer is assertion of tx-empty status. So
just remove the timer completely and hold tx-empty as permanently
asserted (its reset status). This matches the actual behaviour of
instantaneous transmission.
While we are VMSD version bumping, add the tx_fifo as device state to
prepare for upcomming TxFIFO flow control. Implement the interrupt
generation logic for the TxFIFO occupancy.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 7a208a7eb8d79d6429fe28b1396c3104371807b2.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some (interrupt) status register bits relating to the TxFIFO path were
not defined. Define them. This prepares support for proper Tx data path
flow control.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 2068b963f0af8cc834c353944e9fa816d950b163.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The status register bits are always pure functions of other device
state. Move the generation of these bits to the update_status()
function to simplify. Makes developing much easier as theres now no need
to recheck status bits on all the changes to rx/tx fifo state.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 321994929f789096975104f99c55732774be4cae.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This should be rechecked on bus write accesses as such accesses may
change the underlying state that generates the interrupt. Particular
relevant for when the guest touches the interrupt status or mask.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1c250cd61b7b8de492fbc8b79b8370958a56d83b.1388626249.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This improves readability and simplifies the code.
Cc: Dmitry Solodkiy <d.solodkiy@samsung.com>
Cc: Evgeny Voevodin <e.voevodin@samsung.com>
Cc: Igor Mitsyanko <i.mitsyanko@gmail.com>
Cc: Maksim Kozlov <m.kozlov@samsung.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most code already used QEMUTimer without the redundant 'struct' keyword.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In order to get devices appear in output of
"./qemu-system-ppc64 -device ?",
they must be assigned to one of DEVICE_CATEGORY_XXXX.
This puts VIO devices classes to corresponding categories.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Use of SysBusDevice::init is deprecated. Use Device::realize instead.
Also introduce TypeInfo::instance_init milkymist_uart_init().
Reported-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
/iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
=CVfs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony: (39 commits)
ssdt-proc: update generated file
ssdt: fix PBLK length
i386: ACPI table generation code from seabios
pc: use new api to add builtin tables
acpi: add interface to access user-installed tables
hpet: add API to find it
pvpanic: add API to access io port
ich9: APIs for pc guest info
piix: APIs for pc guest info
acpi/piix: add macros for acpi property names
i386: define pc guest info
loader: allow adding ROMs in done callbacks
i386: add bios linker/loader
loader: use file path size from fw_cfg.h
acpi: ssdt pcihp: updat generated file
acpi: pre-compiled ASL files
acpi: add rules to compile ASL source
i386: add ACPI table files from seabios
q35: expose mmcfg size as a property
q35: use macro for MCFG property name
...
Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
pci_set_irq and the other pci irq wrappers use
PCI_INTERRUPT_PIN config register to compute device
INTx pin to assert/deassert.
An irq is allocated using pci_allocate_irq wrapper
only if is needed by non pci devices.
Removed irq related fields from state if not used anymore.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With Linux kernel version 3.3 or later, qemu fails with the following message:
sh_serial: unsupported read from 0x18
Aborted
Reported-and-analyzed-by: Rob Landley <rob@landley.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add simple support for SCLP line-mode also known as operating
system messages. This can be added in addition to or instead of
the SCLP full screen console with -device sclplmconsole.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently all handlers (quiesce, console) only handle one event type.
Some drivers will handle multiple (compatible) event types. Rework the
code accordingly.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
The event_type variable is never used. Get rid of it.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Add reset() functions for event-facility, sclpconsole, and sclpquiesce.
The reset() functions perform variable initialization
at IPL and e.g. when monitor system_reset is called.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds the necessary life migration pieces to the sclp code
by using vmstate_register.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
To use VMState for migration, we need to adapt some sclp code:
- allocate console buffer as part of the console
- change semantic of sclpconsole offset fields
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
* Fix QOM and ISA documentation errors
* Extend object_initialize() et al. to check the instance size
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=LiUs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'afaerber/tags/qom-devices-for-anthony' into staging
QOM device refactorings
* Fix QOM and ISA documentation errors
* Extend object_initialize() et al. to check the instance size
# gpg: Signature made Fri 30 Aug 2013 02:19:48 PM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber (14) and others
# Via Andreas Färber
* afaerber/tags/qom-devices-for-anthony:
isa: Fix documentation of isa_register_portio_list()
qom: Assert instance size in object_initialize_with_type()
qom: Pass available size to object_initialize()
qdev: Pass size to qbus_create_inplace()
virtio-mmio: Pass size to virtio_mmio_bus_new()
virtio-ccw: Pass size to virtio_ccw_bus_new()
s390-virtio-bus: Pass size to virtio_s390_bus_new()
virtio-pci: Pass size to virtio_pci_bus_new()
usb: Pass size to usb_bus_new()
scsi: Pass size to scsi_bus_new()
pci: Pass size to pci_bus_new_inplace()
ide: Pass size to ide_bus_new()
ipack: Pass size to ipack_bus_new_inplace()
intel-hda: Pass size to hda_codec_bus_init()
qom: Fix object_initialize_with_type() argument name in documentation
virtio: Remove unnecessary OBJECT() casts
object: Fix typo in qom/object.h
A number of users are reporting stalls when using the pseries
hypervisor virtual console.
A simple test case is to paste 15 or 17 characters at a time
into the console. Pasting 15 characters at a time works fine
but pasting 17 characters hangs for a random amount of time.
Other activity (network, qemu monitor etc) unblocks it.
If qemu-char tries to send more than 16 characters at once,
vty_can_receive returns false. At this point we have to
wait for the guest to consume that output. Everything is good
so far.
The problem occurs when the the guest does consume the output.
We need to signal back to the qemu-char layer that we are
ready for more input. Without this we block until something
else kicks us (eg network activity).
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
To be passed to object_initialize().
Since commit 39355c3826 the argument is
void*, so drop some superfluous (BusState *) casts or direct parent
field usages.
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed to qbus_create_inplace().
Simplify DEVICE() cast to avoid parent field access.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Alex Bligh (32) and others
# Via Stefan Hajnoczi
* stefanha/block: (42 commits)
win32-aio: drop win32_aio_flush_cb()
aio-win32: replace incorrect AioHandler->opaque usage with ->e
aio / timers: remove dummy_io_handler_flush from tests/test-aio.c
aio / timers: Remove legacy interface
aio / timers: Switch entire codebase to the new timer API
aio / timers: Add scripts/switch-timer-api
aio / timers: Add test harness for AioContext timers
aio / timers: convert block_job_sleep_ns and co_sleep_ns to new API
aio / timers: Convert rtc_clock to be a QEMUClockType
aio / timers: Remove main_loop_timerlist
aio / timers: Rearrange timer.h & make legacy functions call non-legacy
aio / timers: Add qemu_clock_get_ms and qemu_clock_get_ms
aio / timers: Remove legacy qemu_clock_deadline & qemu_timerlist_deadline
aio / timers: Remove alarm timers
aio / timers: Add documentation and new format calls
aio / timers: Use all timerlists in icount warp calculations
aio / timers: Introduce new API timer_new and friends
aio / timers: On timer modification, qemu_notify or aio_notify
aio / timers: Convert mainloop to use timeout
aio / timers: Convert aio_poll to use AioContext timers' deadline
...
Message-id: 1377202298-22896-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert stderr messages calling error_get_pretty()
to error_report().
Timestamp is prepended by -msg timstamp option with it.
Per Markus's comment below, A conversion from fprintf() to
error_report() is always an improvement, regardless of
error_get_pretty().
http://marc.info/?l=qemu-devel&m=137513283408601&w=2
But, it is not reasonable to convert them at one time
because fprintf() is used everwhere in qemu.
So, it should be done step by step with avoiding regression.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
virtconsole and virtserialport are identical in every other aspect
except for the distinguishing VirtIOSerialPortClass::is_console field.
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375313326-14966-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Handle busy conditions (errno=EAGAIN) in char layer by using
the new char layer in the sclp console.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let the Luminary variant inherit from the ARM one, overwriting its ID on
instance_init. Introduce type constant and use QOM casts. Replace
triplicated SysBusDevice initfn with QOM realizefn and instance_init.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Rename etrax_serial to ETRAXSerial, introduce type constant and use QOM
casts.
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The category will be used to sort the devices displayed in
the command line help.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds the necessary VMStateDescription information to support
savevm/loadvm for the spapr_tty (PAPR logical serial) device.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-5-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
commit 1db8b5efe0 introduced an issue
where QEMU would segfault if you have an unattached Cadence UART.
Fix by guarding the flush-on-reset logic on there being a qemu_chr
attachment.
Reported-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Message-id: 9009578ee10a50d994b2e10aa2840d73765f5968.1370577272.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are using the same struct name for two devices. 8250 is widespread
enough that this causes some confusion, rename the other instance.
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Copy&paste error in serial.c causes a crash when attempting
to read from UART (if there is no data to be read)
Signed-off-by: Vladimir Senkov <hangup@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* 'realize-isa.v2' of git://github.com/afaerber/qemu-cpu:
qdev: Drop FROM_QBUS() macro
isa: QOM'ify ISADevice
isa: QOM'ify ISABus
i8259: Convert PICCommonState to use QOM realizefn
kvm/i8259: QOM'ify some more
i8259: QOM'ify some more
i8254: Convert PITCommonState to QOM realizefn
kvm/i8254: QOM'ify some more
i8254: QOM'ify some more
isa: Use realizefn for ISADevice
cs4231a: QOM'ify some more
gus: QOM'ify some more
These three lines are common to both FIFO and regular mode. Just factor
them out to outside the if rather than replicate the same lines inside
both if and else.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use the generic Fifo8 helper provided by QEMU, rather than re-implement
privately.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some cosmetic fixes to char/serial fixing some checkpatch errors.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Drop ISADeviceClass::init and the resulting no-op initfn and let
children implement their own realizefn. Adapt error handling.
Split off an instance_init where sensible.
Signed-off-by: Andreas Färber <afaerber@suse.de>
compiler warnings:
CC hw/char/debugcon.o
hw/char/debugcon.c: In function ‘debugcon_ioport_write’:
hw/char/debugcon.c:58: warning: format ‘%02x’ expects type ‘unsigned int’, but argument 3 has type ‘uint64_t’
hw/char/debugcon.c: In function ‘debugcon_ioport_read’:
hw/char/debugcon.c:70: warning: format ‘%04x’ expects type ‘unsigned int’, but argument 2 has type ‘hwaddr’
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The bus name is wrong since the refactoring.
This keeps the behaviour of the command line.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-16-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-11-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Curerntly the pseries VIO device code contains quite a few explicit
uses of DO_UPCAST and plain C casts. This is (obviously) type unsafe,
and not the conventional way of doing things in the QOM model. This
patch converts the code to use the QOM convention of per-type macros
to do verified casts with OBJECT_CHECK().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This clean the init and the exit functions and rename virtio_common_cleanup
to virtio_cleanup.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove the function pointer in VirtIODevice, and use only
VirtioDeviceClass function pointer.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is necessary so that we get properly woken up to write the rest.
This patch also changes the len argument to the have_data callback, to
avoid doing an unsigned signed comparison.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* bonzini/hw-dirs:
exec: remove useless declarations from memory-internal.h
memory: move core typedefs to qemu/typedefs.h
include: avoid useless includes of exec/ headers
sysemu: avoid proliferation of include/ subdirectories
tpm: reorganize headers and split hardware part
configure: fix TPM logic
acpi.h: make it self contained
acpi: move declarations from pc.h to acpi.h
hw: Add lost ARM core again
Fix failure to create q35 machine
Add linux-headers to QEMU_INCLUDES
arm: fix location of some include files
Conflicts:
configure
aliguori: trivial conflict in configure output
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The qdev field is no longer needed, just drop it.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-8-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As the virtio-serial-pci and virtio-serial-s390 are switched to the new
API, we can use QOM casts.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove old init and exit function as they are no longer needed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-serial which extends virtio-device, so it can be connected
on virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
