clean-header-guards.pl fails to recognize a header guard #endif when
it's followed by a // comment, or multiple comments. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604181618.19980-3-armbru@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
According to: https://spdx.org/ids-how, let's still allow QEMU to use
the SPDX license identifier:
// SPDX-License-Identifier: ***
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190426062705.4651-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Stop using variable length array in dc_zva
* Implement M-profile XPSR GE bits
* Don't enable ARMV7M_EXCP_DEBUG from reset
* armv7m_nvic: NS BFAR and BFSR are RAZ/WI if BFHFNMINS == 0
* armv7m_nvic: Check subpriority in nvic_recompute_state_secure()
* fix various minor issues to allow building for Windows-on-ARM64
* aspeed: Set SDRAM size
* Allow system registers for KVM guests to be changed by QEMU code
* raspi: Diagnose requests for too much RAM
* virt: Support firmware configuration with -blockdev
-----BEGIN PGP SIGNATURE-----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=hcal
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190507' into staging
target-arm queue:
* Stop using variable length array in dc_zva
* Implement M-profile XPSR GE bits
* Don't enable ARMV7M_EXCP_DEBUG from reset
* armv7m_nvic: NS BFAR and BFSR are RAZ/WI if BFHFNMINS == 0
* armv7m_nvic: Check subpriority in nvic_recompute_state_secure()
* fix various minor issues to allow building for Windows-on-ARM64
* aspeed: Set SDRAM size
* Allow system registers for KVM guests to be changed by QEMU code
* raspi: Diagnose requests for too much RAM
* virt: Support firmware configuration with -blockdev
# gpg: Signature made Tue 07 May 2019 12:59:30 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190507:
target/arm: Stop using variable length array in dc_zva
target/arm: Implement XPSR GE bits
hw/intc/armv7m_nvic: Don't enable ARMV7M_EXCP_DEBUG from reset
hw/intc/armv7m_nvic: NS BFAR and BFSR are RAZ/WI if BFHFNMINS == 0
hw/arm/armv7m_nvic: Check subpriority in nvic_recompute_state_secure()
osdep: Fix mingw compilation regarding stdio formats
util/cacheinfo: Use uint64_t on LLP64 model to satisfy Windows ARM64
qga: Fix mingw compilation warnings on enum conversion
QEMU_PACKED: Remove gcc_struct attribute in Windows non x86 targets
arm: aspeed: Set SDRAM size
arm: Allow system registers for KVM guests to be changed by QEMU code
hw/arm/raspi: Diagnose requests for too much RAM
hw/arm/virt: Support firmware configuration with -blockdev
pflash_cfi01: New pflash_cfi01_legacy_drive()
pc: Rearrange pc_system_firmware_init()'s legacy -drive loop
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gcc_struct is for x86 only, and it generates an warning on ARM64 Clang/MinGW targets.
Signed-off-by: Cao Jiaxi <driver1998@foxmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190503003618.10089-1-driver1998@foxmail.com
[PMM: dropped the slirp change as slirp is now a submodule]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Assuming that the ISA clearly describes how to determine
the length of the instruction, and the ISA has a reasonable
maximum instruction length, the input to the decoder can be
right-justified in an appropriate insn word.
This is not 100% convenient, as out-of-line %fields are
numbered relative to the maximum instruction length, but
this appears to still be usable.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The slirp project is now hosted on freedesktop at:
https://gitlab.freedesktop.org/slirp.
The libslirp source was extracted from qemu/slirp filtered through
clang-format (available in project tree). The qemu slirp directory can
be swapped by a git submodule.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190424110041.8175-3-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Add linux/mman.h,asm/mman.h,asm/mman-common.h to linux-headers,
So we can use more mmap2 flags.
Signed-off-by: Zhang Yi <yi.z.zhang@linux.intel.com>
Message-Id: <f65c78d74859f815aa9c4f97407eb33361a6672c.1549555521.git.yi.z.zhang@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Emit comments with shortened file names (previous commit).
Limit search to the input file's directory.
Cope with properties tcg (commit b2b36c22bd) and vcpu (commit
3d211d9f4d).
Cope with capital letters in function names.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-4-armbru@redhat.com
Message-Id: <20190314180929.27722-4-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
target/hppa/trace-events only contains disabled events, resulting in a
trace-dtrace.dtrace file that says "provider qemu {}". SystemTap's
dtrace(1) tool prints a warning when processing this input file.
This patch avoids the error by emitting an empty file instead of
"provider qemu {}" when there are no enabled trace events.
Fixes: 23c3d569f4 ("target/hppa: add TLB trace events")
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-id: 20190321170831.6539-3-stefanha@redhat.com
Message-Id: <20190321170831.6539-3-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The result of this typo would be that "select_foo" would be treated as a "select"
keyword followed by "_foo". Nothing too bad, but easy to fix so let's be clean.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit d0dead3b6d we changed to shipping the u-boot
sources as a tarball, to work around a problem where they
contained a file and directory that had the same name except
for case, which was preventing QEMU's source tarball being
unpacked on case-insensitive filesystems.
In commit f2a3b549e3 we updated our u-boot blob
and sources to v2019.01, which no longer has this problem,
so we can finally remove our workaround (effectively
reverting d0dead3b6d).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 20190314155628.8822-1-peter.maydell@linaro.org
Add support for pattern groups.
Other misc cleanups for multiple decode functions.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJch+V5AAoJEGTfOOivfiFfsFsH/1KW6UWAiieZ1+HPYEp24Ku8
hCNxlfj0iKe1ZEuC8qp2U27GzePi71IlIJ7p5AuAhiTQBBWz8bPzJJUALm3EliaI
V4/13fLnTYALnPWoUJclU5frdHBhpIWxFUtnLdB50dSU1cTbFFyS+63JsW3wSSXt
UqntlhSsAmAQr3ULnKufwDZQJgQoft/8G4YzvMOm/7E0ZeV3B9mARAkn6m/30gLx
nXgLI2OQrA1ATLeTfzNRup9G+YjLx0nW2LRhAseIWcQAW8PyfJsfW6tJeou93+bf
fK6BkLMgor74QH37Y3u7KVJGJ04u2Gtu0p2JzBA9MU/0l07WihWPA0eJGnP396I=
=BxBC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-dt-20190312' into staging
Break out documentation to docs/devel/.
Add support for pattern groups.
Other misc cleanups for multiple decode functions.
# gpg: Signature made Tue 12 Mar 2019 16:59:37 GMT
# gpg: using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-dt-20190312:
decodetree: Properly diagnose fields overflowing an insn
decodetree: Prefix extract function names with decode_function
decodetree: Allow +- to begin a number initializing a field
decodetree: Produce clean output for an empty input file
decodetree: Add --static-decode option
test/decode: Add tests for PatternGroups
decodetree: Allow grouping of overlapping patterns
decodetree: Do not unconditionaly return from Pattern.output_code
decodetree: Ensure build_tree does not include values outside insnmask
decodetree: Document the usefulness of argument sets
decodetree: Move documentation to docs/devel/decodetree.rst
MAINTAINERS: Add scripts/decodetree.py to the TCG section
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously this would result in an exception for shifting
the field mask by a negative number.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is interesting for bisection, where an output file is plumbed,
but does not yet have patterns.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As a consequence, the 'return false' gets pushed up one level.
This will allow us to perform some other action when the
translator returns failure.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
One great big block comment isn't the best way to document
the syntax of a language.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
I'm the sole author (aside from a one line by Greg fixing encoding)
and I was asked nicely on IRC to bring it into line with the rest of
the files.
Cc: Greg Kurz <groug@kaod.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qemu-gdb.py was committed after 2012-01-13, so the notice about
GPL v2-only contributions does not apply.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apart from defconfig (which is a no-op),
allyesconfig/allnoconfig/randcondfig can be implemented simply by ignoring
the RHS of assignments and "default" statements. The RHS is replaced
respectively by "true", "false" or a random value.
However, allyesconfig and randconfig do not quite work, because all the
files for hw/ARCH/Kconfig are sourced and therefore you could end up
enabling some ARM boards in x86 or things like that. This is left for
future work, but I am leaving it in to help debugging minikconf itself.
allnoconfig mode is tied to a new configure option, --without-default-devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.
The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig. One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script. This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Kconfig files were generated mostly with this script:
for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
shift
if test $# = 1; then
cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
bool
EOF
git add $(dirname $1)/Kconfig
else
echo $i $*
fi
done
sed -i '$d' hw/*/Kconfig
for i in hw/*; do
if test -d $i && ! test -f $i/Kconfig; then
touch $i/Kconfig
git add $i/Kconfig
fi
done
Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.
Kconfig.host and hw/Kconfig were created manually.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are three parts in the semantic analysis:
1) evaluating expressions. This is done as a simple visit
of the Expr nodes.
2) ordering clauses. This is done by constructing a graph of variables.
There is an edge from X to Y if Y depends on X, if X selects Y, or if
X appears in a conditional selection of Y; in other words, if the value
of X can affect the value of Y. Each clause has a "destination" variable
whose value can be affected by the clause, and clauses will be processed
according to a topological sorting of their destination variables.
Defaults are processed after all other clauses with the same destination.
3) deriving the value of the variables. This is done by processing
the clauses in the topological order provided by the previous step.
A "depends on" clause will force a variable to False, a "select" clause
will force a variable to True, an assignment will force a variable
to its RHS. A default will set a variable to its RHS if it has not
been set before. Because all variables have a default, after visiting
all clauses all variables will have been set.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190123065618.3520-25-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add Python classes that represent the Kconfig abstract syntax tree.
The abstract syntax tree is stored as a list of clauses. For example:
config FOO
depends on BAR
select BAZ
is represented as three clauses:
FOO depends on BAR
FOO default n
select BAZ if FOO
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190123065618.3520-24-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This implements a scanner and recursive descent parser for Kconfig-like
configuration files. The only "action" of the parser is for now to
detect undefined variables and process include files.
The main differences between Kconfig and this are:
* only the "bool" type is supported
* variables can only be defined once
* choices are not supported (but they could be added as syntactic
sugar for multiple Boolean values)
* menus and other graphical concepts (prompts, help text) are not
supported
* assignments ("CONFIG_FOO=y", "CONFIG_FOO=n") are parsed as part
of the Kconfig language, not as a separate file.
The idea was originally by Ákos Kovács, but I could not find his
implementation so I had to redo it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190123065618.3520-23-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Python:
* introduce "python" directory with module namespace
* log QEMU launch command line on qemu.QEMUMachine
Acceptance Tests:
* initrd 4GiB+ test
* migration test
* multi vm support in test class
* bump Avocado version and drop "🥑 enable"
-----BEGIN PGP SIGNATURE-----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=dwff
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python queue, 2019-02-22
Python:
* introduce "python" directory with module namespace
* log QEMU launch command line on qemu.QEMUMachine
Acceptance Tests:
* initrd 4GiB+ test
* migration test
* multi vm support in test class
* bump Avocado version and drop "🥑 enable"
# gpg: Signature made Fri 22 Feb 2019 19:37:07 GMT
# gpg: using RSA key 657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
Acceptance tests: expect boot to extract 2GiB+ initrd with linux-v4.16
Acceptance tests: use linux-3.6 and set vm memory to 4GiB
tests.acceptance: adds simple migration test
tests.acceptance: adds multi vm capability for acceptance tests
scripts/qemu.py: log QEMU launch command line
Introduce a Python module structure
Acceptance tests: drop usage of "🥑 enable"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We generally put implicitly defined types in whatever module triggered
their definition. This is wrong for array types, as the included test
case demonstrates. Let's have a closer look at it.
Type 'Status' is defined sub-sub-module.json. Array type ['Status']
occurs in main module qapi-schema-test.json and in
include/sub-module.json. The main module's use is first, so the array
type gets put into the main module.
The generated C headers define StatusList in qapi-types.h. But
include/qapi-types-sub-module.h uses it without including
qapi-types.h. Oops.
To fix that, put the array type into its element type's module.
Now StatusList gets generated into qapi-types-sub-module.h, which all
its users include.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190301154051.23317-8-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The #include directives to pull in sub-modules use file names relative
to the main module. Works only when all modules are in the same
directory, or the main module's output directory is in the compiler's
include path. Use relative file names instead.
The dummy variable we generate to avoid empty .o files has an invalid
name for sub-modules in other directories. Fix that.
Both messed up in commit 252dc3105f "qapi: Generate separate .h, .c
for each module". Escaped testing because tests/qapi-schema-test.json
doesn't cover sub-modules in other directories, only
tests/qapi-schema/include-relpath.json does, and we generate and
compile C code only for the former, not the latter. Fold the latter
into the former. This would have caught the mistakes fixed in this
commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190301154051.23317-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Not much of an improvement now, but the next commit will profit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190301154051.23317-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Adding a telnet monitor for no real purpose on a fixed port is not so
great. Just use a null monitor instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is a simple move of Python code that wraps common QEMU
functionality, and are used by a number of different tests
and scripts.
By treating that code as a real Python module, we can more easily:
* reuse code
* have a proper place for the module's own unittests
* apply a more consistent style
* generate documentation
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190206162901.19082-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This reverts commit 7bd2634905.
The commit applied the events' conditions to the members of enum
QAPIEvent. Awkward, because it renders QAPIEvent unusable in
target-independent code as soon as we make an event target-dependent.
Reverting this has the following effects:
* ui/vnc.c can remain target independent.
* monitor_qapi_event_conf[] doesn't have to muck around with #ifdef.
* query-events again doesn't reflect conditionals. I'm going to
deprecate it in favor of query-qmp-schema.
Another option would be to split target-dependent parts off enum
QAPIEvent into a target-dependent enum. Doesn't seem worthwhile right
now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-17-armbru@redhat.com>
Having to include qapi-events.h just for QAPIEvent is suboptimal, but
quite tolerable now. It'll become problematic when we have events
conditional on the target, because then qapi-events.h won't be usable
from target-independent code anymore. Avoid that by generating it
into separate files.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-6-armbru@redhat.com>
The next commit wants to generate qapi-emit-events.{c.h}. To enable
that, extend QAPISchemaModularCVisitor to support additional "system
modules", i.e. modules that don't correspond to a (user-defined) QAPI
schema module.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-5-armbru@redhat.com>
We neglect to call .visit_module() for the special module we use for
built-ins. Harmless, but clean it up anyway. The
tests/qapi-schema/*.out now show the built-in module as 'module None'.
Subclasses of QAPISchemaModularCVisitor need to ._add_module() this
special module to enable code generation for built-ins. When this
hasn't been done, QAPISchemaModularCVisitor.visit_module() does
nothing for the special module. That looks like built-ins could
accidentally be generated into the wrong module when a subclass
neglects to call ._add_module(). Can't happen, because built-ins are
all visited before any other module. But that's non-obvious. Switch
off code generation explicitly.
Rename QAPISchemaModularCVisitor._begin_module() to
._begin_user_module().
New QAPISchemaModularCVisitor._is_builtin_module(), for clarity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-4-armbru@redhat.com>
qemu coroutine command results in following error output:
Python Exception <class 'gdb.error'> 'arch_prctl' has unknown return
type; cast the call to its declared return type: Error occurred in
Python command: 'arch_prctl' has unknown return type; cast the call to
its declared return type
Fix it by giving it what it wants: arch_prctl return type.
Information on the topic:
https://sourceware.org/gdb/onlinedocs/gdb/Calling.html
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190206151425.105871-1-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
