Commit Graph

46 Commits

Author SHA1 Message Date
Vitaly Kuznetsov
561dbb41b1 i386: Make migration fail when Hyper-V reenlightenment was enabled but 'user_tsc_khz' is unset
KVM doesn't fully support Hyper-V reenlightenment notifications on
migration. In particular, it doesn't support emulating TSC frequency
of the source host by trapping all TSC accesses so unless TSC scaling
is supported on the destination host and KVM_SET_TSC_KHZ succeeds, it
is unsafe to proceed with migration.

KVM_SET_TSC_KHZ is called from two sites: kvm_arch_init_vcpu() and
kvm_arch_put_registers(). The later (intentionally) doesn't propagate
errors allowing migrations to succeed even when TSC scaling is not
supported on the destination. This doesn't suit 're-enlightenment'
use-case as we have to guarantee that TSC frequency stays constant.

Require 'tsc-frequency=' command line option to be specified for successful
migration when re-enlightenment was enabled by the guest.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210319123801.1111090-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-19 08:48:18 -04:00
Vitaly Kuznetsov
816d20c927 i386: Fix 'hypercall_hypercall' typo
Even the name of this section is 'cpu/msr_hyperv_hypercall',
'hypercall_hypercall' is clearly a typo.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210318160249.1084178-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-19 08:48:18 -04:00
Michael Tokarev
cba42d61a3 Various spelling fixes
An assorted set of spelling fixes in various places.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-09 21:19:10 +01:00
Paolo Bonzini
e7e7bdabab target/i86: implement PKS
Protection Keys for Supervisor-mode pages is a simple extension of
the PKU feature that QEMU already implements.  For supervisor-mode
pages, protection key restrictions come from a new MSR.  The MSR
has no XSAVE state associated to it.

PKS is only respected in long mode.  However, in principle it is
possible to set the MSR even outside long mode, and in fact
even the XSAVE state for PKRU could be set outside long mode
using XRSTOR.  So do not limit the migration subsections for
PKRU and PKRS to long mode.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-08 14:43:55 +01:00
Claudio Fontana
a9dc68d9b2 i386: move kvm accel files into kvm/
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201212155530.23098-2-cfontana@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-16 14:06:52 -05:00
Vitaly Kuznetsov
db5daafab2 target/i386: support KVM_FEATURE_ASYNC_PF_INT
Linux-5.8 introduced interrupt based mechanism for 'page ready' events
delivery and disabled the old, #PF based one (see commit 2635b5c4a0e4
"KVM: x86: interrupt based APF 'page ready' event delivery"). Linux
guest switches to using in in 5.9 (see commit b1d405751cd5 "KVM: x86:
Switch KVM guest to using interrupts for page ready APF delivery").
The feature has a new KVM_FEATURE_ASYNC_PF_INT bit assigned and
the interrupt vector is set in MSR_KVM_ASYNC_PF_INT MSR. Support this
in QEMU.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200908141206.357450-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30 19:09:19 +02:00
Paolo Bonzini
b16c0e20c7 KVM: add support for AMD nested live migration
Support for nested guest live migration is part of Linux 5.8, add the
corresponding code to QEMU.  The migration format consists of a few
flags, is an opaque 4k blob.

The blob is in VMCB format (the control area represents the L1 VMCB
control fields, the save area represents the pre-vmentry state; KVM does
not use the host save area since the AMD manual allows that) but QEMU
does not really care about that.  However, the flags need to be
copied to hflags/hflags2 and back.

In addition, support for retrieving and setting the AMD nested virtualization
states allows the L1 guest to be reset while running a nested guest, but
a small bug in CPU reset needs to be fixed for that to work.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10 18:02:17 -04:00
Cameron Esfahani
7332a4a468 Fix some comment spelling errors.
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Message-Id: <086c197db928384b8697edfa64755e2cb46c8100.1575685843.git.dirty@apple.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-18 02:34:11 +01:00
Paolo Bonzini
89a289c7e9 x86: move more x86-generic functions out of PC files
These are needed by microvm too, so move them outside of PC-specific files.
With this patch, microvm.c need not include pc.h anymore.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:33:50 +01:00
Paolo Bonzini
2a9758c51e target/i386: add support for MSR_IA32_TSX_CTRL
The MSR_IA32_TSX_CTRL MSR can be used to hide TSX (also known as the
Trusty Side-channel Extension).  By virtualizing the MSR, KVM guests
can disable TSX and avoid paying the price of mitigating TSX-based
attacks on microarchitectural side channels.

Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-21 16:35:05 +01:00
Liam Merwick
2f34ebf222 hw/i386: Move save_tsc_khz from PCMachineClass to X86MachineClass
Attempting to migrate a VM using the microvm machine class results in the source
QEMU aborting with the following message/backtrace:

target/i386/machine.c:955:tsc_khz_needed: Object 0x555556608fa0 is not an
instance of type generic-pc-machine

abort()
object_class_dynamic_cast_assert()
vmstate_save_state_v()
vmstate_save_state()
vmstate_save()
qemu_savevm_state_complete_precopy()
migration_thread()
migration_thread()
migration_thread()
qemu_thread_start()
start_thread()
clone()

The access to the machine class returned by MACHINE_GET_CLASS() in
tsc_khz_needed() is crashing as it is trying to dereference a different
type of machine class object (TYPE_PC_MACHINE) to that of this microVM.

This can be resolved by extending the changes in the following commit
f0bb276bf8 ("hw/i386: split PCMachineState deriving X86MachineState from it")
and moving the save_tsc_khz field in PCMachineClass to X86MachineClass.

Fixes: f0bb276bf8 ("hw/i386: split PCMachineState deriving X86MachineState from it")
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <1574075605-25215-1-git-send-email-liam.merwick@oracle.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-19 10:01:34 +01:00
Tao Xu
6508799707 target/i386: Add support for save/load IA32_UMWAIT_CONTROL MSR
UMWAIT and TPAUSE instructions use 32bits IA32_UMWAIT_CONTROL at MSR
index E1H to determines the maximum time in TSC-quanta that the processor
can reside in either C0.1 or C0.2.

This patch is to Add support for save/load IA32_UMWAIT_CONTROL MSR in
guest.

Co-developed-by: Jingqi Liu <jingqi.liu@intel.com>
Signed-off-by: Jingqi Liu <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191011074103.30393-3-tao3.xu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-23 17:50:27 +02:00
Marcelo Tosatti
d645e13287 kvm: i386: halt poll control MSR support
Add support for halt poll control MSR: save/restore, migration
and new feature name.

The purpose of this MSR is to allow the guest to disable
host halt poll.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20190603230408.GA7938@amt.cnet>
[Do not enable by default, as pointed out by Mark Kanda. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-20 17:26:17 +02:00
Markus Armbruster
12e9493df9 Include hw/boards.h a bit less
hw/boards.h pulls in almost 60 headers.  The less we include it into
headers, the better.  As a first step, drop superfluous inclusions,
and downgrade some more to what's actually needed.  Gets rid of just
one inclusion into a header.

Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-23-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster
650d103d3e Include hw/hw.h exactly where needed
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h.  This permits dropping most of its inclusions.  Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Paolo Bonzini
1e44f3ab71 target/i386: skip KVM_GET/SET_NESTED_STATE if VMX disabled, or for SVM
Do not allocate env->nested_state unless we later need to migrate the
nested virtualization state.

With this change, nested_state_needed() will return false if the
VMX flag is not included in the virtual machine.  KVM_GET/SET_NESTED_STATE
is also disabled for SVM which is safer (we know that at least the NPT
root and paging mode have to be saved/loaded), and thus the corresponding
subsection can go away as well.

Inspired by a patch from Liran Alon.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-19 18:02:22 +02:00
Liran Alon
79a197ab18 target/i386: kvm: Demand nested migration kernel capabilities only when vCPU may have enabled VMX
Previous to this change, a vCPU exposed with VMX running on a kernel
without KVM_CAP_NESTED_STATE or KVM_CAP_EXCEPTION_PAYLOAD resulted in
adding a migration blocker. This was because when the code was written
it was thought there is no way to reliably know if a vCPU is utilising
VMX or not at runtime. However, it turns out that this can be known to
some extent:

In order for a vCPU to enter VMX operation it must have CR4.VMXE set.
Since it was set, CR4.VMXE must remain set as long as the vCPU is in
VMX operation. This is because CR4.VMXE is one of the bits set
in MSR_IA32_VMX_CR4_FIXED1.
There is one exception to the above statement when vCPU enters SMM mode.
When a vCPU enters SMM mode, it temporarily exits VMX operation and
may also reset CR4.VMXE during execution in SMM mode.
When the vCPU exits SMM mode, vCPU state is restored to be in VMX operation
and CR4.VMXE is restored to its original state of being set.
Therefore, when the vCPU is not in SMM mode, we can infer whether
VMX is being used by examining CR4.VMXE. Otherwise, we cannot
know for certain but assume the worse that vCPU may utilise VMX.

Summaring all the above, a vCPU may have enabled VMX in case
CR4.VMXE is set or vCPU is in SMM mode.

Therefore, remove migration blocker and check before migration
(cpu_pre_save()) if the vCPU may have enabled VMX. If true, only then
require relevant kernel capabilities.

While at it, demand KVM_CAP_EXCEPTION_PAYLOAD only when the vCPU is in
guest-mode and there is a pending/injected exception. Otherwise, this
kernel capability is not required for proper migration.

Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Tested-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-19 18:01:47 +02:00
Liran Alon
ec7b1bbd2c target/i386: kvm: Fix when nested state is needed for migration
When vCPU is in VMX operation and enters SMM mode,
it temporarily exits VMX operation but KVM maintained nested-state
still stores the VMXON region physical address, i.e. even when the
vCPU is in SMM mode then (nested_state->hdr.vmx.vmxon_pa != -1ull).

Therefore, there is no need to explicitly check for
KVM_STATE_NESTED_SMM_VMXON to determine if it is necessary
to save nested-state as part of migration stream.

Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190624230514.53326-1-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-05 22:16:46 +02:00
Liran Alon
12604092e2 target/i386: kvm: Add nested migration blocker only when kernel lacks required capabilities
Previous commits have added support for migration of nested virtualization
workloads. This was done by utilising two new KVM capabilities:
KVM_CAP_NESTED_STATE and KVM_CAP_EXCEPTION_PAYLOAD. Both which are
required in order to correctly migrate such workloads.

Therefore, change code to add a migration blocker for vCPUs exposed with
Intel VMX or AMD SVM in case one of these kernel capabilities is
missing.

Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Message-Id: <20190619162140.133674-11-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-21 13:25:28 +02:00
Liran Alon
fd13f23b8c target/i386: kvm: Add support for KVM_CAP_EXCEPTION_PAYLOAD
Kernel commit c4f55198c7c2 ("kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD")
introduced a new KVM capability which allows userspace to correctly
distinguish between pending and injected exceptions.

This distinguish is important in case of nested virtualization scenarios
because a L2 pending exception can still be intercepted by the L1 hypervisor
while a L2 injected exception cannot.

Furthermore, when an exception is attempted to be injected by QEMU,
QEMU should specify the exception payload (CR2 in case of #PF or
DR6 in case of #DB) instead of having the payload already delivered in
the respective vCPU register. Because in case exception is injected to
L2 guest and is intercepted by L1 hypervisor, then payload needs to be
reported to L1 intercept (VMExit handler) while still preserving
respective vCPU register unchanged.

This commit adds support for QEMU to properly utilise this new KVM
capability (KVM_CAP_EXCEPTION_PAYLOAD).

Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-10-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-21 13:25:27 +02:00
Liran Alon
ebbfef2f34 target/i386: kvm: Add support for save and restore nested state
Kernel commit 8fcc4b5923af ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE")
introduced new IOCTLs to extract and restore vCPU state related to
Intel VMX & AMD SVM.

Utilize these IOCTLs to add support for migration of VMs which are
running nested hypervisors.

Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Tested-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-9-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-21 13:23:47 +02:00
Vitaly Kuznetsov
2d384d7c83 i386/kvm: convert hyperv enlightenments properties from bools to bits
Representing Hyper-V properties as bits will allow us to check features
and dependencies between them in a natural way.

Suggested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190517141924.19024-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-21 02:29:38 +02:00
Peter Maydell
59c58f96b2 Miscellaneous patches for 2019-06-11
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl0A4AkSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTYoIP/1aIZuQcPyDFbABmTKO/vLculOf++32J
 uBPRNd8PvkhMCdSerHzBpSZiINRRENF3MxLZ2Z9apiGvdhTnEc+PG4i/quyaOxOn
 O8FJv5wzgVofF3apmxCfUo+ikefbn1xhwG/KpnmvD+SeYfls/8RIwldxbLDO+g72
 pGTFx+3qQHaTl627mR1+FFsl3BZza6uWClxH/mWOucjTVPtBNwNpf9uDg3v9QT5I
 3dIVPv6sNarzMDc9I6L5j5JtgEAGqwIQwHCO8sMXIawi6uFOPg2CCAN8D+hblbEE
 TjnxiN2u9OdwSL5lKhLPnXFjnOt6bjuQmDHbpba9ehjY7Wm9YsFCv6D0Vj5delPw
 XaQ9VU1BcMWaBeeIsbW2bYK96lUjbM3S79JV6/HvKrb4+pxSgL8CwkUWV2cfThr2
 zAsENkYg3OSUwHeTWMk4rv81jardxOCA+7hZDnyrvrN8qCHG5xdLsDVbmUwDXzgb
 n4On0rQXRxIoK3XsdI+PfjcaYXXQB3PlMmKV/k4TVEV7OhDpr5t4Ph4ZeMwPu/bx
 LYCEeGKtyk3ODPW53TtC06NPRO0V0SK2raN4MIjC2FoxoJoyMz/f1RCZq6/WzowE
 SXumoCGaBSZGCbTmbl/sHzKyK+asRdVmgXT+1F7FPUtQloIMAMYQWrNV2Bn4pM57
 zMswAqP5qV0M
 =UYSi
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2019-06-11-v3' into staging

Miscellaneous patches for 2019-06-11

# gpg: Signature made Wed 12 Jun 2019 12:20:41 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-misc-2019-06-11-v3:
  MAINTAINERS: Polish headline decorations
  MAINTAINERS: Improve section headlines
  MAINTAINERS: Remove duplicate entries of qemu-devel@nongnu.org
  Clean up a header guard symbols (again)
  Supply missing header guards
  Clean up a few header guard symbols
  scripts/clean-header-guards: Fix handling of trailing comments
  Normalize position of header guard
  Include qemu-common.h exactly where needed
  Include qemu/module.h where needed, drop it from qemu-common.h
  qemu-common: Move qemu_isalnum() etc. to qemu/ctype.h
  qemu-common: Move tcg_enabled() etc. to sysemu/tcg.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-12 13:50:02 +01:00
Markus Armbruster
14a48c1d0d qemu-common: Move tcg_enabled() etc. to sysemu/tcg.h
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h,
sysemu/kvm.h, sysemu/whpx.h.  Only tcg_enabled() & friends sit in
qemu-common.h.  This necessitates inclusion of qemu-common.h into
headers, which is against the rules spelled out in qemu-common.h's
file comment.

Move tcg_enabled() & friends into their own header sysemu/tcg.h, and
adjust #include directives.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Rebased with conflicts resolved automatically, except for
accel/tcg/tcg-all.c]
2019-06-11 20:22:09 +02:00
Pavel Dovgalyuk
89a44a1033 i386: Save EFER for 32-bit targets
i386 (32 bit) emulation uses EFER in wrmsr and in MMU fault
processing.
But it does not included in VMState, because "efer" field is disabled with

This patch adds a section for 32-bit targets which saves EFER when
it's value is non-zero.

Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <155913371654.8429.1659082639780315242.stgit@pasha-Precision-3630-Tower>
Reviewed-by: Peter Xu <peterx@redhat.com>
[ehabkost: indentation fix]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-06-11 10:17:47 -03:00
Roman Kagan
606c34bfd5 hyperv: qom-ify SynIC
Make Hyper-V SynIC a device which is attached as a child to a CPU.  For
now it only makes SynIC visibile in the qom hierarchy, and maintains its
internal fields in sync with the respecitve msrs of the parent cpu (the
fields will be used in followup patches).

Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-3-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19 13:44:14 +02:00
Paolo Bonzini
990e0be260 i386: do not migrate MSR_SMI_COUNT on machine types <2.12
MSR_SMI_COUNT started being migrated in QEMU 2.12.  Do not migrate it
on older machine types, or the subsection causes a load failure for
guests that use SMM.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-30 14:00:11 +02:00
Jan Kiszka
fe441054bb target-i386: Add NPT support
This implements NPT suport for SVM by hooking into
x86_cpu_handle_mmu_fault where it reads the stage-1 page table. Whether
we need to perform this 2nd stage translation, and how, is decided
during vmrun and stored in hflags2, along with nested_cr3 and
nested_pg_mode.

As get_hphys performs a direct cpu_vmexit in case of NPT faults, we need
retaddr in that function. To avoid changing the signature of
cpu_handle_mmu_fault, this passes the value from tlb_fill to get_hphys
via the CPU state.

This was tested successfully via the Jailhouse hypervisor.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <567473a0-6005-5843-4c73-951f476085ca@web.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02 15:41:18 +02:00
Konrad Rzeszutek Wilk
cfeea0c021 i386: Define the Virt SSBD MSR and handling of it (CVE-2018-3639)
"Some AMD processors only support a non-architectural means of enabling
speculative store bypass disable (SSBD).  To allow a simplified view of
this to a guest, an architectural definition has been created through a new
CPUID bit, 0x80000008_EBX[25], and a new MSR, 0xc001011f.  With this, a
hypervisor can virtualize the existence of this definition and provide an
architectural method for using SSBD to a guest.

Add the new CPUID feature, the new MSR and update the existing SSBD
support to use this MSR when present." (from x86/speculation: Add virtualized
speculative store bypass disable support in Linux).

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180521215424.13520-4-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-05-21 18:59:08 -03:00
Vitaly Kuznetsov
ba6a4fd95d i386/kvm: add support for Hyper-V reenlightenment MSRs
KVM recently gained support for Hyper-V Reenlightenment MSRs which are
required to make KVM-on-Hyper-V enable TSC page clocksource to its guests
when INVTSC is not passed to it (and it is not passed by default in Qemu
as it effectively blocks migration).

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20180411115036.31832-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-11 14:33:39 +02:00
Peter Maydell
5bdd374347 * Migrate MSR_SMI_COUNT (Liran)
* Update kernel headers (Gerd, myself)
 * SEV support (Brijesh)
 
 I have not tested non-x86 compilation, but I reordered the SEV patches
 so that all non-x86-specific changes go first to catch any possible
 issues (which weren't there anyway :)).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJap/4yAAoJEL/70l94x66DmPoH/igfzYkxFyIHFqzb/hQEut3e
 IJA05u9DBSqqdSvL0UeLdUgyJTeDM3S5kKZqZ38BPHIudwOGtydoIM2utWtPSejf
 Z+mS77+dSgchEMgf1gxmD0oZ5TrO/2pdOYfaZZuQuGmGLruKsDgz6vH3F87cfk8b
 yJSJkoZkFc8C9SpwQERWYuhXn2fYFxSBFgEMc9xSFN+zqQUFqeIfOJhwZ+txjAUl
 y1EKlhhVyjkxTLR++SkzhKIJ8D5cycpcY/H19gw3ghHviY/tGwNLot3bLRPbwCM6
 QvrXDf4rhvFHTmmOfliCI5y6Xgj0u7IZv2fVoKXEtKk1qyfyD4ZnouYTaqP/U9I=
 =Q4/y
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-sev' into staging

* Migrate MSR_SMI_COUNT (Liran)
* Update kernel headers (Gerd, myself)
* SEV support (Brijesh)

I have not tested non-x86 compilation, but I reordered the SEV patches
so that all non-x86-specific changes go first to catch any possible
issues (which weren't there anyway :)).

# gpg: Signature made Tue 13 Mar 2018 16:37:06 GMT
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream-sev: (22 commits)
  sev/i386: add sev_get_capabilities()
  sev/i386: qmp: add query-sev-capabilities command
  sev/i386: qmp: add query-sev-launch-measure command
  sev/i386: hmp: add 'info sev' command
  cpu/i386: populate CPUID 0x8000_001F when SEV is active
  sev/i386: add migration blocker
  sev/i386: finalize the SEV guest launch flow
  sev/i386: add support to LAUNCH_MEASURE command
  target/i386: encrypt bios rom
  sev/i386: add command to encrypt guest memory region
  sev/i386: add command to create launch memory encryption context
  sev/i386: register the guest memory range which may contain encrypted data
  sev/i386: add command to initialize the memory encryption context
  include: add psp-sev.h header file
  sev/i386: qmp: add query-sev command
  target/i386: add Secure Encrypted Virtualization (SEV) object
  kvm: introduce memory encryption APIs
  kvm: add memory encryption context
  docs: add AMD Secure Encrypted Virtualization (SEV)
  machine: add memory-encryption option
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-15 16:49:30 +00:00
Liran Alon
e13713db5b KVM: x86: Add support for save/load MSR_SMI_COUNT
This MSR returns the number of #SMIs that occurred on
CPU since boot.

KVM commit 52797bf9a875 ("KVM: x86: Add emulation of MSR_SMI_COUNT")
introduced support for emulating this MSR.

This commit adds support for QEMU to save/load this
MSR for migration purposes.

Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-13 12:04:03 +01:00
Chao Peng
b77146e9a1 i386: Add support to get/set/migrate Intel Processor Trace feature
Add Intel Processor Trace related definition. It also add
corresponding part to kvm_get/set_msr and vmstate.

Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Message-Id: <1520182116-16485-2-git-send-email-luwei.kang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-03-12 15:59:46 -03:00
Paolo Bonzini
a33a2cfe2f i386: Add support for SPEC_CTRL MSR
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180109154519.25634-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-01-17 23:04:31 -02:00
Dr. David Alan Gilbert
44b1ff319c migration: pre_save return int
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.

Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.

Note: If you add an error exit in your pre_save you must emit
an error_report to say why.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-27 11:35:59 +01:00
Roman Kagan
5e95381260 hyperv: add header with protocol definitions
The definitions for Hyper-V emulation are currently taken from a header
imported from the Linux kernel.

However, as these describe a third-party protocol rather than a kernel
API, it probably wasn't a good idea to publish it in the kernel uapi.

This patch introduces a header that provides all the necessary
definitions, superseding the one coming from the kernel.

The new header supports (temporary) coexistence with the kernel one.
The constants explicitly named in the Hyper-V specification (e.g. msr
numbers) are defined in a non-conflicting way.  Other constants and
types have got new names.

While at this, the protocol data structures are defined in a more
conventional way, without bitfields, enums, and excessive unions.

The code using this stuff is adjusted, too; it can now be built both
with and without the kernel header in the tree.

Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20170713201522.13765-2-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-19 16:20:49 +02:00
Yang Zhong
79c664f62d target/i386: add the tcg_enabled() in target/i386/
Add the tcg_enabled() where the x86 target needs to disable
TCG-specific code.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-05 09:12:44 +02:00
Yang Zhong
1d8ad165b6 target/i386: split cpu_set_mxcsr() and make cpu_set_fpuc() inline
Split the cpu_set_mxcsr() and make cpu_set_fpuc() inline with specific
tcg code.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-05 09:12:44 +02:00
Yang Zhong
db573d2cf7 target/i386: make cpu_get_fp80()/cpu_set_fp80() static
Move cpu_get_fp80()/cpu_set_fp80() from fpu_helper.c to
machine.c because fpu_helper.c will be disabled if tcg is
disabled in the build.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-05 09:12:44 +02:00
Paolo Bonzini
f8c45c6550 target/i386: use multiple CPU AddressSpaces
This speeds up SMM switches.  Later on it may remove the need to take
the BQL, and it may also allow to reuse code between TCG and KVM.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-07 18:22:02 +02:00
Dr. David Alan Gilbert
08b277ac46 migration/i386: Remove support for pre-0.12 formats
Remove support for versions of the CPU state prior to 11
which is the version used in qemu 0.12 - you'd be pretty
lucky if you got a migration stream to work from anything
that old anyway.  This doesn't affect the machine type
definition in any way.

My main reason for doing this is the hack for sysenter_esp/eip
that uses .get/.put's in state versions less than 7 (that's
prior to somewhere before 0.10).

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170405190024.27581-4-dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-11 16:08:51 -03:00
Dr. David Alan Gilbert
ab808276f8 vmstatification: i386 FPReg
Convert the fpreg save/restore to use VMSTATE_ macros rather than
.get/.put.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170405190024.27581-3-dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-11 16:08:50 -03:00
Dr. David Alan Gilbert
46baa9007f migration/i386: Remove old non-softfloat 64bit FP support
Long long ago, we used to support storing the x86 FP registers in
a 64bit format.

Then c31da136a0 in v0.14-rc0 removed
the last support for writing that in the migration format.
Even before that, it was only used if you had softfloat disabled
 (i.e. !USE_X86LDOUBLE) so in practice use of it in even earlier
qemu is unlikely for most users.

Kill it off, it's complicated, and possibly broken.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170405190024.27581-2-dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-11 16:08:50 -03:00
Jianjun Duan
2c21ee769e migration: extend VMStateInfo
Current migration code cannot handle some data structures such as
QTAILQ in qemu/queue.h. Here we extend the signatures of put/get
in VMStateInfo so that customized handling is supported. put now
will return int type.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-24 17:54:47 +00:00
Alex Bennée
d10eb08f5d cputlb: drop flush_global flag from tlb_flush
We have never has the concept of global TLB entries which would avoid
the flush so we never actually use this flag. Drop it and make clear
that tlb_flush is the sledge-hammer it has always been.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[DG: ppc portions]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-13 14:24:37 +00:00
Thomas Huth
fcf5ef2ab5 Move target-* CPU file into a target/ folder
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.

Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2016-12-20 21:52:12 +01:00