Configurations w/o vecbase may have vectors not grouped together and not
in fixed order. They may not always be grouped into single output
sections by assigning next offset to dot, as it may sometimes move dot
backwards and sometimes they may even belong to different memory region.
Don't group vectors into single output section. Instead put each vector
into its own section ant put it at its default virtual address.
Reserve 4KBytes from the default vectors base and put rest of the code
and data starting from there. Mark vectors sections as executable,
otherwise their contents is discarded. There may be as little as 16
bytes reserved for some vectors, load handler address into a0 and use
ret.n to jump there to make vector code fit into this 16 byte space.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
When test suite with multiple tests fails it's not obvious which test
failed. Pring "failed" in every invocation of test_fail. Do printing
when DEBUG preprocessor macro is defined.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Don't generate handlers for IRQ levels that are not defined for the CPU
or for window overflow/underflow exceptions for configs w/o windowed
registers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Not all CPU configurations may have enough space for handler code
between exception/interrupt vectors. Leave jumps to the handlers at the
vectors, but move all handlers past the vectors area.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Failed memory transactions should raise exceptions 14 (for fetch) or 15
(for load/store) with XEA2.
Memory accesses that result in TLB miss followed by an attempt to load
PTE from physical memory which fails should raise InstTLBMiss or
LoadStoreTLBMiss with XEA2.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The value of CCOUNT special register is calculated as time elapsed
since CCOUNT == 0 multiplied by the core frequency. In icount mode time
increment between consecutive instructions that don't involve time
warps is constant, but unless the result of multiplication of this
constant by the core frequency is a whole number the CCOUNT increment
between these instructions may not be constant. E.g. with icount=7 each
instruction takes 128ns, with core clock of 10MHz CCOUNT values for
consecutive instructions are:
502: (128 * 502 * 10000000) / 1000000000 = 642.56
503: (128 * 503 * 10000000) / 1000000000 = 643.84
504: (128 * 504 * 10000000) / 1000000000 = 645.12
I.e.the CCOUNT increments depend on the absolute time. This results in
varying CCOUNT differences for consecutive instructions in tests that
involve time warps and don't set CCOUNT explicitly.
Change frequency of the core used in tests so that clock cycle takes
exactly 64ns. Change icount power used in tests to 6, so that each
instruction takes exactly 1 clock cycle. With these changes CCOUNT
increments only depend on the number of executed instructions and that's
what timer tests expect, so they work correctly.
Longer story:
http://lists.nongnu.org/archive/html/qemu-devel/2018-03/msg04326.html
Cc: Pavel Dovgaluk <Pavel.Dovgaluk@ispras.ru>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
memctl SR is not available on dc232b, as it was introduced in more
recent hardware release. Now that this information is available through
the libisa the test fails. Fix the test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Don't use hardcoded software interrupt masks, use XCHAL macros.
Mask off timer interrupt bits that are not checked for.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Don't expect that CCOUNT increments are equal to the number of executed
instructions. Verify that timer interrupt does not fire before the
programmed CCOMPARE value and does fire after.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Timer tests expect certain determinism in CCOUNT updates and timer
interrupts firing. Run QEMU with -icount to get deterministic results.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.
Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [crisµblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tracked down with an ugly, brittle and probably buggy Perl script.
Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Check that entry instruction raises window overflow exception when
PS.CALLINC points to live registers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Xtensa cores have configurable interrupt vectors and endiannes. This
information is needed to link executable images correctly for a specific
core configuration. Instead of hard-coding dc232 defaults pull endianness,
number of high-priority interrupts and location of vectors from the core
configuration and pass it through the C preprocessor.
While at it clean up tabs and align the initial stack on 16 bytes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Test that non-locking prefetch operations don't cause exceptions on
missing TLB and that other 'hit' cache operations do.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add path to the core configuration directory to test build command and
replace .include asm directive with #include to enable preprocessing.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Some test suites, like MMU, need per-test initialization. Don't make them
redefine test macro, add test_init for that purpose.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
