In multifd_recv_setup() we allocate (among other things)
* a MultiFDRecvData struct to multifd_recv_state::data
* a MultiFDRecvData struct to each multfd_recv_state->params[i].data
(Then during execution we might swap these pointers around.)
But in multifd_recv_cleanup() we free multifd_recv_state->data
in multifd_recv_cleanup_state() but we don't ever free the
multifd_recv_state->params[i].data. This results in a memory
leak reported by LeakSanitizer:
(cd build/asan && \
ASAN_OPTIONS="fast_unwind_on_malloc=0:strip_path_prefix=/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/../../" \
QTEST_QEMU_BINARY=./qemu-system-x86_64 \
./tests/qtest/migration-test --tap -k -p /x86_64/migration/multifd/file/mapped-ram )
[...]
Direct leak of 72 byte(s) in 3 object(s) allocated from:
#0 0x561cc0afcfd8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x218efd8) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
#1 0x7f89d37acc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x561cc1e9c83c in multifd_recv_setup migration/multifd.c:1606:19
#3 0x561cc1e68618 in migration_ioc_process_incoming migration/migration.c:972:9
#4 0x561cc1e3ac59 in migration_channel_process_incoming migration/channel.c:45:9
#5 0x561cc1e4fa0b in file_accept_incoming_migration migration/file.c:132:5
#6 0x561cc30f2c0c in qio_channel_fd_source_dispatch io/channel-watch.c:84:12
#7 0x7f89d37a3c43 in g_main_dispatch debian/build/deb/../../../glib/gmain.c:3419:28
#8 0x7f89d37a3c43 in g_main_context_dispatch debian/build/deb/../../../glib/gmain.c:4137:7
#9 0x561cc3b21659 in glib_pollfds_poll util/main-loop.c:287:9
#10 0x561cc3b1ff93 in os_host_main_loop_wait util/main-loop.c:310:5
#11 0x561cc3b1fb5c in main_loop_wait util/main-loop.c:589:11
#12 0x561cc1da2917 in qemu_main_loop system/runstate.c:801:9
#13 0x561cc3796c1c in qemu_default_main system/main.c:37:14
#14 0x561cc3796c67 in main system/main.c:48:12
#15 0x7f89d163bd8f in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
#16 0x7f89d163be3f in __libc_start_main csu/../csu/libc-start.c:392:3
#17 0x561cc0a79fa4 in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x210bfa4) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x561cc0afcfd8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x218efd8) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
#1 0x7f89d37acc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x561cc1e9bed9 in multifd_recv_setup migration/multifd.c:1588:32
#3 0x561cc1e68618 in migration_ioc_process_incoming migration/migration.c:972:9
#4 0x561cc1e3ac59 in migration_channel_process_incoming migration/channel.c:45:9
#5 0x561cc1e4fa0b in file_accept_incoming_migration migration/file.c:132:5
#6 0x561cc30f2c0c in qio_channel_fd_source_dispatch io/channel-watch.c:84:12
#7 0x7f89d37a3c43 in g_main_dispatch debian/build/deb/../../../glib/gmain.c:3419:28
#8 0x7f89d37a3c43 in g_main_context_dispatch debian/build/deb/../../../glib/gmain.c:4137:7
#9 0x561cc3b21659 in glib_pollfds_poll util/main-loop.c:287:9
#10 0x561cc3b1ff93 in os_host_main_loop_wait util/main-loop.c:310:5
#11 0x561cc3b1fb5c in main_loop_wait util/main-loop.c:589:11
#12 0x561cc1da2917 in qemu_main_loop system/runstate.c:801:9
#13 0x561cc3796c1c in qemu_default_main system/main.c:37:14
#14 0x561cc3796c67 in main system/main.c:48:12
#15 0x7f89d163bd8f in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16
#16 0x7f89d163be3f in __libc_start_main csu/../csu/libc-start.c:392:3
#17 0x561cc0a79fa4 in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-x86_64+0x210bfa4) (BuildId: be72e086d4e47b172b0a72779972213fd9916466)
SUMMARY: AddressSanitizer: 96 byte(s) leaked in 4 allocation(s).
Free the params[i].data too.
Cc: qemu-stable@nongnu.org
Fixes: d117ed0699 ("migration/multifd: Allow receiving pages without packets")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
An error path missed setting *errp, which can cause a NULL deref.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20240813050638.446172-11-npiggin@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-19-alex.bennee@linaro.org>
When a channel fails to create, the code currently just returns. This
is wrong for two reasons:
1) Channel n+1 will not get to initialize it's semaphores, leading to
an assert when terminate_threads tries to post to it:
qemu-system-x86_64: ../util/qemu-thread-posix.c:92:
qemu_mutex_lock_impl: Assertion `mutex->initialized' failed.
2) (theoretical) If channel n-1 already started creation it will
defeat the purpose of the channels_created logic which is in place
to avoid migrate_fd_cleanup() to run while channels are still being
created.
This cannot really happen today because the current failure cases
for multifd_new_send_channel_create() are all synchronous,
resulting from qio_channel_file_new_path() getting a bad
filename. This would hit all channels equally.
But I don't want to set a trap for future people, so have all
channels try to create (even if failing), and only fail after the
channels_created semaphore has been posted.
While here, remove the error_report_err call. There's one already at
migrate_fd_cleanup later on.
Cc: qemu-stable@nongnu.org
Reported-by: Jim Fehlig <jfehlig@suse.com>
Fixes: b7b03eb614 ("migration/multifd: Add outgoing QIOChannelFile support")
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The QIOChannelFile object already has its reference decremented by
g_autoptr. Trying to unref an extra time causes:
ERROR:../qom/object.c:1241:object_unref: assertion failed: (obj->ref > 0)
Fixes: a701c03dec ("migration: Drop reference to QIOChannel if file seeking fails")
Fixes: 6d3279655a ("migration: Fix file migration with fdset")
Reported-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
This patch adds a migration state on src called "postcopy-recover-setup".
The new state will describe the intermediate step starting from when the
src QEMU received a postcopy recovery request, until the migration channels
are properly established, but before the recovery process take place.
The request came from Libvirt where Libvirt currently rely on the migration
state events to detect migration state changes. That works for most of the
migration process but except postcopy recovery failures at the beginning.
Currently postcopy recovery only has two major states:
- postcopy-paused: this is the state that both sides of QEMU will be in
for a long time as long as the migration channel was interrupted.
- postcopy-recover: this is the state where both sides of QEMU handshake
with each other, preparing for a continuation of postcopy which used to
be interrupted.
The issue here is when the recovery port is invalid, the src QEMU will take
the URI/channels, noticing the ports are not valid, and it'll silently keep
in the postcopy-paused state, with no event sent to Libvirt. In this case,
the only thing Libvirt can do is to poll the migration status with a proper
interval, however that's less optimal.
Considering that this is the only case where Libvirt won't get a
notification from QEMU on such events, let's add postcopy-recover-setup
state to mimic what we have with the "setup" state of a newly initialized
migration, describing the phase of connection establishment.
With that, postcopy recovery will have two paths to go now, and either path
will guarantee an event generated. Now the events will look like this
during a recovery process on src QEMU:
- Initially when the recovery is initiated on src, QEMU will go from
"postcopy-paused" -> "postcopy-recover-setup". Old QEMUs don't have
this event.
- Depending on whether the channel re-establishment is succeeded:
- In succeeded case, src QEMU will move from "postcopy-recover-setup"
to "postcopy-recover". Old QEMUs also have this event.
- In failure case, src QEMU will move from "postcopy-recover-setup" to
"postcopy-paused" again. Old QEMUs don't have this event.
This guarantees that Libvirt will always receive a notification for
recovery process properly.
One thing to mention is, such new status is only needed on src QEMU not
both. On dest QEMU, the state machine doesn't change. Hence the events
don't change either. It's done like so because dest QEMU may not have an
explicit point of setup start. E.g., it can happen that when dest QEMUs
doesn't use migrate-recover command to use a new URI/channel, but the old
URI/channels can be reused in recovery, in which case the old ports simply
can work again after the network routes are fixed up.
Add a new helper postcopy_is_paused() detecting whether postcopy is still
paused, taking RECOVER_SETUP into account too. When using it on both
src/dst, a slight change is done altogether to always wait for the
semaphore before checking the status, because for both sides a sem_post()
will be required for a recovery.
Cc: Jiri Denemark <jdenemar@redhat.com>
Cc: Prasad Pandit <ppandit@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Buglink: https://issues.redhat.com/browse/RHEL-38485
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Destination QEMU can setup incoming ports for two purposes: either a fresh
new incoming migration, in which QEMU will switch to SETUP for channel
establishment, or a paused postcopy migration, in which QEMU will stay in
POSTCOPY_PAUSED until kicking off the RECOVER phase.
Now the state machine worked on dest node for the latter, only because
migrate_set_state() implicitly will become a noop if the current state
check failed. It wasn't clear at all.
Clean it up by providing a helper migration_incoming_state_setup() doing
proper checks over current status. Postcopy-paused will be explicitly
checked now, and then we can bail out for unknown states.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
QEMU uses "int" in most cases even if it stores MigrationStatus. I don't
know why, so let's try to do that right and see what blows up..
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The postcopy thread names on dest QEMU are slightly confusing, partly I'll
need to blame myself on 36f62f11e4 ("migration: Postcopy preemption
preparation on channel creation"). E.g., "fault-fast" reads like a fast
version of "fault-default", but it's actually the fast version of
"postcopy/listen".
Taking this chance, rename all the migration threads with proper rules.
Considering we only have 15 chars usable, prefix all threads with "mig/",
meanwhile identify src/dst threads properly this time. So now most thread
names will look like "mig/DIR/xxx", where DIR will be "src"/"dst", except
the bg-snapshot thread which doesn't have a direction.
For multifd threads, making them "mig/{src|dst}/{send|recv}_%d".
We used to have "live_migration" thread for a very long time, now it's
called "mig/src/main". We may hope to have "mig/dst/main" soon but not
yet.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Zhijian Li (Fujitsu) <lizhijian@fujitsu.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We always do the flush when finishing one round of scan, and during
complete() phase we should scan one more round making sure no dirty page
existed. In that case we shouldn't need one explicit FLUSH at the end of
complete(), as when reaching there all pages should have been flushed.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Tested-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
When multifd is used along with mapped-ram, we can take benefit of a
filesystem that supports the O_DIRECT flag and perform direct I/O in
the multifd threads. This brings a significant performance improvement
because direct-io writes bypass the page cache which would otherwise
be thrashed by the multifd data which is unlikely to be needed again
in a short period of time.
To be able to use a multifd channel opened with O_DIRECT, we must
ensure that a certain aligment is used. Filesystems usually require a
block-size alignment for direct I/O. The way to achieve this is by
enabling the mapped-ram feature, which already aligns its I/O properly
(see MAPPED_RAM_FILE_OFFSET_ALIGNMENT at ram.c).
By setting O_DIRECT on the multifd channels, all writes to the same
file descriptor need to be aligned as well, even the ones that come
from outside multifd, such as the QEMUFile I/O from the main migration
code. This makes it impossible to use the same file descriptor for the
QEMUFile and for the multifd channels. The various flags and metadata
written by the main migration code will always be unaligned by virtue
of their small size. To workaround this issue, we'll require a second
file descriptor to be used exclusively for direct I/O.
The second file descriptor can be obtained by QEMU by re-opening the
migration file (already possible), or by being provided by the user or
management application (support to be added in future patches).
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add the direct-io migration parameter that tells the migration code to
use O_DIRECT when opening the migration stream file whenever possible.
This is currently only used with the mapped-ram migration that has a
clear window guaranteed to perform aligned writes.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
When the "file:" migration support was added we missed the special
case in the qemu_open_old implementation that allows for a particular
file name format to be used to refer to a set of file descriptors that
have been previously provided to QEMU via the add-fd QMP command.
When using this fdset feature, we should not truncate the migration
file because being given an fd means that the management layer is in
control of the file and will likely already have some data written to
it. This is further indicated by the presence of the 'offset'
argument, which indicates the start of the region where QEMU is
allowed to write.
Fix the issue by replacing the O_TRUNC flag on open by an ftruncate
call, which will take the offset into consideration.
Fixes: 385f510df5 ("migration: file URI offset")
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We forgot to drop the reference to the QIOChannel in the error path of
the offset adjustment. Do it now.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Send raw packets over if UADK hardware support is not available. This is to
satisfy Qemu qtest CI which may run on platforms that don't have UADK
hardware support. Subsequent patch will add support for uadk migration
qtest.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Initialize UADK session and allocate buffers required. The actual
compression/decompression will only be done in a subsequent patch.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
QPL compression and decompression will use IAA hardware path if the IAA
hardware is available. Otherwise the QPL library software path is used.
The hardware path will automatically fall back to QPL software path if
the IAA queues are busy. In some scenarios, this may happen frequently,
such as configuring 4 channels but only one IAA device is available. In
the case of insufficient IAA hardware resources, retry and fallback can
help optimize performance:
1. Retry + SW fallback:
total time: 14649 ms
downtime: 25 ms
throughput: 17666.57 mbps
pages-per-second: 1509647
2. No fallback, always wait for work queues to become available
total time: 18381 ms
downtime: 25 ms
throughput: 13698.65 mbps
pages-per-second: 859607
If both the hardware and software paths fail, the uncompressed page is
sent directly.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
during initialization, a software job is allocated to each channel
for software path fallabck when the IAA hardware is unavailable or
the hardware job submission fails. If the IAA hardware is available,
multiple hardware jobs are allocated for batch processing.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
add the Query Processing Library (QPL) compression method
Introduce the qpl as a new multifd migration compression method, it can
use In-Memory Analytics Accelerator(IAA) to accelerate compression and
decompression, which can not only reduce network bandwidth requirement
but also reduce host compression and decompression CPU overhead.
How to enable qpl compression during migration:
migrate_set_parameter multifd-compression qpl
There is no qpl compression level parameter added since it only supports
level one, users do not need to specify the qpl compression level.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
[fixed docs spacing in migration.json]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Different compression methods may require different numbers of IOVs.
Based on streaming compression of zlib and zstd, all pages will be
compressed to a data block, so two IOVs are needed for packet header
and compressed data block.
Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qmp_xen_save_devices_state() and qmp_xen_load_devices_state() violate
this principle: they call qemu_save_device_state() and
qemu_loadvm_state(), which call error_report_err().
I wish I could clean this up now, but migration's error reporting is
too complicated (confused?) for me to mess with it.
Instead, I'm merely improving the error reported by
qmp_xen_load_devices_state() and qmp_xen_load_devices_state() to the
QMP core from
An IO error has occurred
to
saving Xen device state failed
and
loading Xen device state failed
respectively.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240513141703.549874-6-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Peter Xu <peterx@redhat.com>
- Li Zhijian's COLO minor fixes
- Marc-André's virtio-gpu fix
- Fiona's virtio-net USO fix
- A couple of migration-test fixes from Thomas
-----BEGIN PGP SIGNATURE-----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=DDrh
-----END PGP SIGNATURE-----
Merge tag 'migration-20240522-pull-request' of https://gitlab.com/farosas/qemu into staging
Migration pull request
- Li Zhijian's COLO minor fixes
- Marc-André's virtio-gpu fix
- Fiona's virtio-net USO fix
- A couple of migration-test fixes from Thomas
# -----BEGIN PGP SIGNATURE-----
#
# iQJEBAABCAAuFiEEqhtIsKIjJqWkw2TPx5jcdBvsMZ0FAmZObggQHGZhcm9zYXNA
# c3VzZS5kZQAKCRDHmNx0G+wxnWE8D/49RGE+g29qyk9aKx3lU8mSq+ZzmX5GncBt
# 5+Mx5qoHDsBCQTE+dQpEVIoeMJ2HIbgbOML4qsnp6Hw/4/TWkfwC/R6+ZmHBevRk
# fVLkVh2JMHVg8Tq+0FO1X1QnMU03uJ7EAuWdDa8HqlJ5dQY/K3gDaku8oQBXk96X
# 13pChSbMob76tdb+wiwbdEakabigH7XfrPdI6lzI8MCGTIcPKc/UKTFYuoj/OsNx
# raqy+uBtvKtfHxiaYnIgHIPNAF/1f4tP3iAOcPoZWIMXWxFkE8+ANDJAbWo6xIcL
# DGg/wEzZO/OnXLjOhjvLBUHK/fx4wQ5bsqA09BVxoRyBGblkXr+bcwBLYjgiEqzT
# aniPiAx5W/Db+T7HqZPIWesFYj3cmcwvYUTrx/RPMdC0epG+ZczDMtescHdZbxvt
# Pjs3nFeCLhyYcVhlTI72eXRCxdd/26+r6/OmrBC2+GaZrybM61TvNo+3XvO0Pfhi
# UmwF2EN27XmSMelLvH/MnflUVgBHKDs3CCQzDlxreHq2jMVR0SL7LU5wMJJ58Iok
# M3u74izQM25bwYxiASH+4iRn0puH1mOwgOx28W0uiQfZY/678/lCnwa1Tul15BRE
# fIQZJhyIGzhSpwLqEXmdXdlLQs1isqIgpd/mzKgZ285nLr7kz+4gxCUqiXgVbrl7
# P45Dym1u4g==
# =DDrh
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 22 May 2024 03:13:28 PM PDT
# gpg: using RSA key AA1B48B0A22326A5A4C364CFC798DC741BEC319D
# gpg: issuer "farosas@suse.de"
# gpg: Good signature from "Fabiano Rosas <farosas@suse.de>" [unknown]
# gpg: aka "Fabiano Almeida Rosas <fabiano.rosas@suse.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: AA1B 48B0 A223 26A5 A4C3 64CF C798 DC74 1BEC 319D
* tag 'migration-20240522-pull-request' of https://gitlab.com/farosas/qemu:
tests/qtest/migration-test: Fix the check for a successful run of analyze-migration.py
tests/qtest/migration-test: Run some basic tests on s390x and ppc64 with TCG, too
hw/core/machine: move compatibility flags for VirtIO-net USO to machine 8.1
virtio-gpu: fix v2 migration
migration: fix a typo
migration: add "exists" info to load-state-field trace
migration/colo: Tidy up bql_unlock() around bdrv_activate_all()
migration/colo: make colo_incoming_co() return void
migration/colo: Minor fix for colo error message
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make the code more tight.
Suggested-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
[fixed mangled author email address]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Currently, it always returns 0, no need to check the return value at all.
In addition, enter colo coroutine only if migration_incoming_colo_enabled()
is true.
Once the destination side enters the COLO* state, the COLO process will
take over the remaining processes until COLO exits.
Cc: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
[fixed mangled author email address]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Use it to update the current error of the migration stream if
available and if not, simply print out the error. Next changes will
update with an error to report.
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The fd: URI can currently trigger two different types of migration, a
TCP migration using sockets and a file migration using a plain
file. This is in conflict with the recently introduced (8.2) QMP
migrate API that takes structured data as JSON-like format. We cannot
keep the same backend for both types of migration because with the new
API the code is more tightly coupled to the type of transport. This
means a TCP migration must use the 'socket' transport and a file
migration must use the 'file' transport.
If we keep allowing fd: when using a file, this creates an issue when
the user converts the old-style (fd:) to the new style ("transport":
"socket") invocation because the file descriptor in question has
previously been allowed to be either a plain file or a socket.
To avoid creating too much confusion, we can simply deprecate the fd:
+ file usage, which is thought to be rarely used currently and instead
establish a 1:1 correspondence between fd: URI and socket transport,
and file: URI and file transport.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The 'compress' migration capability enables the old compression code
which has shown issues over the years and is thought to be less stable
and tested than the more recent multifd-based compression. The old
compression code has been deprecated in 8.2 and now is time to remove
it.
Deprecation commit 864128df46 ("migration: Deprecate old compression
method").
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The block migration has been considered obsolete since QEMU 8.2 in
favor of the more flexible storage migration provided by the
blockdev-mirror driver. Two releases have passed so now it's time to
remove it.
Deprecation commit 66db46ca83 ("migration: Deprecate block
migration").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The block migration is considered obsolete and has been deprecated in
8.2. Remove the migrate command option that enables it. This only
affects the QMP and HMP commands, the feature can still be accessed by
setting the migration 'block' capability. The whole feature will be
removed in a future patch.
Deprecation commit 8846b5bfca ("migration: migrate 'blk' command
option is deprecated.").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The block incremental option for block migration has been deprecated
in 8.2 in favor of using the block-mirror feature. Remove it now.
Deprecation commit 40101f320d ("migration: migrate 'inc' command
option is deprecated.").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The 'skipped' field of the MigrationStats struct has been deprecated
in 8.1. Time to remove it.
Deprecation commit 7b24d32634 ("migration: skipped field is really
obsolete.").
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Now we do set MIGRATION_FAILED state, but don't give a chance to
orchestrator to query migration state and get the error.
Let's provide a possibility for QMP-based orchestrators to get an error
like with outgoing migration.
For hmp_migrate_incoming(), let's enable the new behavior: HMP is not
and ABI, it's mostly intended to use by developer and it makes sense
not to stop the process.
For x-exit-preconfig, let's keep the old behavior:
- it's called from init(), so here we want to keep current behavior by
default
- it does exit on error by itself as well
So, if we want to change the behavior of x-exit-preconfig, it should be
another patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Unify error reporting in the function. This simplifies the following
commit, which will not-exit-on-error behavior variant to the function.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
It's bad idea to leave critical section with error object freed, but
s->error still set, this theoretically may lead to use-after-free
crash. Let's avoid it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Make call to migration_incoming_state_destroy(), instead of doing only
partial of it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
migration/ram.c: API Conversion qemu_mutex_lock(),
and qemu_mutex_unlock() to WITH_QEMU_LOCK_GUARD macro
Signed-off-by: Will Gyda <vilhelmgyda@gmail.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Migration code needs no private fields of the coroutine backend.
Include the "regular" coroutine.h header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is defined and referred to exclusively from a .c file.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Address the comment added in commit 4629ed1e98
("qerror: Finally unused, clean up"), from 2015:
/*
* These macros will go away, please don't use
* in new code, and do not add new ones!
*/
Mechanical transformation using sed, manually
removing the definition in include/qapi/qmp/qerror.h.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240312141343.3168265-10-armbru@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
[Straightforward conflict with commit aeaafb1e59 (migration: export
migration_is_running) resolved]
QERR_INVALID_PARAMETER_VALUE is defined as:
#define QERR_INVALID_PARAMETER_VALUE \
"Parameter '%s' expects %s"
The current error is formatted as:
"Parameter 'vcpu_dirty_limit' expects is invalid, it must greater then 1 MB/s"
Replace by:
"Parameter 'vcpu_dirty_limit' must be greater than 1 MB/s"
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240312141343.3168265-9-armbru@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
[New error message corrected, commit message updated accordingly]
- Het's new test cases for "channels"
- Het's fix for a typo for vsock parsing
- Cedric's VFIO error report series
- Cedric's one more patch for dirty-bitmap error reports
- Zhijian's rdma deprecation patch
- Yuan's zeropage optimization to fix double faults on anon mem
- Zhijian's COLO fix on a crash
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZig4HxIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wbQiwD/V5nSJzSuAG4Ra1Fjo+LRG2TT6qk8eNCi
fIytehSw6cYA/0wqarxOF0tr7ikeyhtG3w4xFf44kk6KcPkoVSl1tqoL
=pJmQ
-----END PGP SIGNATURE-----
Merge tag 'migration-20240423-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull for 9.1
- Het's new test cases for "channels"
- Het's fix for a typo for vsock parsing
- Cedric's VFIO error report series
- Cedric's one more patch for dirty-bitmap error reports
- Zhijian's rdma deprecation patch
- Yuan's zeropage optimization to fix double faults on anon mem
- Zhijian's COLO fix on a crash
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZig4HxIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbQiwD/V5nSJzSuAG4Ra1Fjo+LRG2TT6qk8eNCi
# fIytehSw6cYA/0wqarxOF0tr7ikeyhtG3w4xFf44kk6KcPkoVSl1tqoL
# =pJmQ
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 23 Apr 2024 03:37:19 PM PDT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [unknown]
# gpg: aka "Peter Xu <peterx@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240423-pull-request' of https://gitlab.com/peterx/qemu: (26 commits)
migration/colo: Fix bdrv_graph_rdlock_main_loop: Assertion `!qemu_in_coroutine()' failed.
migration/multifd: solve zero page causing multiple page faults
migration: Add Error** argument to add_bitmaps_to_list()
migration: Modify ram_init_bitmaps() to report dirty tracking errors
migration: Add Error** argument to xbzrle_init()
migration: Add Error** argument to ram_state_init()
memory: Add Error** argument to the global_dirty_log routines
migration: Introduce ram_bitmaps_destroy()
memory: Add Error** argument to .log_global_start() handler
migration: Add Error** argument to .load_setup() handler
migration: Add Error** argument to .save_setup() handler
migration: Add Error** argument to qemu_savevm_state_setup()
migration: Add Error** argument to vmstate_save()
migration: Always report an error in ram_save_setup()
migration: Always report an error in block_save_setup()
vfio: Always report an error in vfio_save_setup()
s390/stattrib: Add Error** argument to set_migrationmode() handler
tests/qtest/migration: Fix typo for vsock in SocketAddress_to_str
tests/qtest/migration: Add negative tests to validate migration QAPIs
tests/qtest/migration: Add multifd_tcp_plain test using list of channels instead of uri
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
bdrv_activate_all() should not be called from the coroutine context, move
it to the QEMU thread colo_process_incoming_thread() with the bql_lock
protected.
The backtrace is as follows:
#4 0x0000561af7948362 in bdrv_graph_rdlock_main_loop () at ../block/graph-lock.c:260
#5 0x0000561af7907a68 in graph_lockable_auto_lock_mainloop (x=0x7fd29810be7b) at /patch/to/qemu/include/block/graph-lock.h:259
#6 0x0000561af79167d1 in bdrv_activate_all (errp=0x7fd29810bed0) at ../block.c:6906
#7 0x0000561af762b4af in colo_incoming_co () at ../migration/colo.c:935
#8 0x0000561af7607e57 in process_incoming_migration_co (opaque=0x0) at ../migration/migration.c:793
#9 0x0000561af7adbeeb in coroutine_trampoline (i0=-106876144, i1=22042) at ../util/coroutine-ucontext.c:175
#10 0x00007fd2a5cf21c0 in () at /lib64/libc.so.6
Cc: qemu-stable@nongnu.org
Cc: Fabiano Rosas <farosas@suse.de>
Closes: https://gitlab.com/qemu-project/qemu/-/issues/2277
Fixes: 2b3912f135 ("block: Mark bdrv_first_blk() and bdrv_is_root_node() GRAPH_RDLOCK")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Tested-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240417025634.1014582-1-lizhijian@fujitsu.com
Signed-off-by: Peter Xu <peterx@redhat.com>
