The next step to centralize all NUMA/associativity handling in
the spapr machine is to create a 'one stop place' for all
things ibm,associativity.
This patch introduces numa_assoc_array, a 2 dimensional array
that will store all ibm,associativity arrays of all NUMA nodes.
This array is initialized in a new spapr_numa_associativity_init()
function, called in spapr_machine_init(). It is being initialized
with the same values used in other ibm,associativity properties
around spapr files (i.e. all zeros, last value is node_id).
The idea is to remove all hardcoded definitions and FDT writes
of ibm,associativity arrays, doing instead a call to the new
helper spapr_numa_write_associativity_dt() helper, that will
be able to write the DT with the correct values.
We'll start small, handling the trivial cases first. The
remaining instances of ibm,associativity will be handled
next.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200903220639.563090-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function is only used inside spapr_nvdimm.c.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200901125645.118026-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The NVDIMM support for pSeries was introduced in 5.1, but it
didn't contemplate the 'nvdimm' machine option that other
archs uses. For every other arch, if no '-machine nvdimm(=on)'
is present, it is assumed that the NVDIMM support is disabled.
The user must explictly inform that the machine supports
NVDIMM. For pseries-5.1 the 'nvdimm' option is completely
ignored, and support is always assumed to exist. This
leads to situations where the user is able to set 'nvdimm=off'
but the guest boots up with the NVDIMMs anyway.
Fixing this now, after 5.1 launch, can put the overall NVDIMM
support for pseries in a strange place regarding this 'nvdimm'
machine option. If we force everything to be like other archs,
existing pseries-5.1 guests that didn't use 'nvdimm' to use NVDIMM
devices will break. If we attempt to make the newer pseries
machines (5.2+) behave like everyone else, but keep pseries-5.1
untouched, we'll have consistency problems on machine upgrade
(5.1 will have different default values for NVDIMM support than
5.2).
The common ground here is, if the user sets 'nvdimm=off', we
must comply regardless of being 5.1 or 5.2+. This patch
changes spapr_nvdimm_validate() to verify if the user set
NVDIMM support off in the machine options and, in that
case, error out if we have a NVDIMM device. The default
value for 5.2+ pseries machines will still be 'nvdimm=on'
when there is no 'nvdimm' option declared, just like it is today
with pseries-5.1. In the end we'll have different default
semantics from everyone else in the absence of the 'nvdimm'
machine option, but this boat has sailed.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1848887
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200825215749.213536-4-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
NVDIMM has different contraints and conditions than the regular
DIMM and we'll need to add at least one more.
Instead of relying on 'if (nvdimm)' conditionals in the body of
spapr_memory_pre_plug(), use the existing spapr_nvdimm_validate_opts()
and put all NVDIMM handling code there. Rename it to
spapr_nvdimm_validate() to reflect that the function is now checking
more than the nvdimm device options. This makes spapr_memory_pre_plug()
a bit easier to follow, and we can tune in NVDIMM parameters
and validation in the same place.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200825215749.213536-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since we're using the string just once, just use g_autofree and
avoid leaking it without calling g_free().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200825215749.213536-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The restrictions here (which are checked at pre-plug time) are PAPR
specific, rather than being inherent to the NVDIMM devices. Adjust the
error messages to be clearer about this.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pseries machine does not support NVDIMM modules without label.
Attempting to do so, even if the overall block size is aligned with
256MB, will seg fault the guest kernel during NVDIMM probe. This
can be avoided by forcing 'label-size' to always be present for
sPAPR NVDIMMs.
The verification was put before the alignment check because the
presence of label-size affects the alignment calculation, so
it's not optimal to warn the user about an alignment error,
then about the lack of label-size, then about a new alignment
error when the user sets a label-size.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200413203628.31636-1-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fixes Coverity issue,
CID 1419883: Error handling issues (CHECKED_RETURN)
Calling "qemu_uuid_parse" without checking return value
nvdimm_set_uuid() already verifies if the user provided uuid is valid or
not. So, need to check for the validity during pre-plug validation again.
As this a false positive in this case, assert if not valid to be safe.
Also, error_abort if QOM accessor encounters error while fetching the uuid
property.
Reported-by: Coverity (CID 1419883)
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <158281096564.89540.4507375445765515529.stgit@lep8c.aus.stglabs.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch implements few of the necessary hcalls for the nvdimm support.
PAPR semantics is such that each NVDIMM device is comprising of multiple
SCM(Storage Class Memory) blocks. The guest requests the hypervisor to
bind each of the SCM blocks of the NVDIMM device using hcalls. There can
be SCM block unbind requests in case of driver errors or unplug(not
supported now) use cases. The NVDIMM label read/writes are done through
hcalls.
Since each virtual NVDIMM device is divided into multiple SCM blocks,
the bind, unbind, and queries using hcalls on those blocks can come
independently. This doesn't fit well into the qemu device semantics,
where the map/unmap are done at the (whole)device/object level granularity.
The patch doesnt actually bind/unbind on hcalls but let it happen at the
device_add/del phase itself instead.
The guest kernel makes bind/unbind requests for the virtual NVDIMM device
at the region level granularity. Without interleaving, each virtual NVDIMM
device is presented as a separate guest physical address range. So, there
is no way a partial bind/unbind request can come for the vNVDIMM in a
hcall for a subset of SCM blocks of a virtual NVDIMM. Hence it is safe to
do bind/unbind everything during the device_add/del.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <158131059899.2897.11515211602702956854.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add support for NVDIMM devices for sPAPR. Piggyback on existing nvdimm
device interface in QEMU to support virtual NVDIMM devices for Power.
Create the required DT entries for the device (some entries have
dummy values right now).
The patch creates the required DT node and sends a hotplug
interrupt to the guest. Guest is expected to undertake the normal
DR resource add path in response and start issuing PAPR SCM hcalls.
The device support is verified based on the machine version unlike x86.
This is how it can be used ..
Ex :
For coldplug, the device to be added in qemu command line as shown below
-object memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896
-device nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0
For hotplug, the device to be added from monitor as below
object_add memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896
device_add nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[Early implementation]
Message-Id: <158131058078.2897.12767731856697459923.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
