vq->inuse must be zeroed upon device reset like most other virtqueue
fields.
In theory, virtio_reset() just needs assert(vq->inuse == 0) since
devices must clean up in-flight requests during reset (requests cannot
not be leaked!).
In practice, it is difficult to achieve vq->inuse == 0 across reset
because balloon, blk, 9p, etc implement various different strategies for
cleaning up requests. Most devices call g_free(elem) directly without
telling virtio.c that the VirtQueueElement is cleaned up. Therefore
vq->inuse is not decremented during reset.
This patch zeroes vq->inuse and trusts that devices are not leaking
VirtQueueElements across reset.
I will send a follow-up series that refactors request life-cycle across
all devices and converts vq->inuse = 0 into assert(vq->inuse == 0) but
this more invasive approach is not appropriate for stable trees.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ladi Prosek <lprosek@redhat.com>
Currently each VQ Notification Virtio Capability is allocated
on a different page. The idea is to enable split drivers within
guests, however there are no known plans to do that.
The allocation will result in a 8MB BAR, more than various
guest firmwares pre-allocates for PCI Bridges hotplug process.
Reserve 4 bytes per VQ by default and add a new parameter
"page-per-vq" to be used with split drivers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will used by the next patch.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PIO MR registration should use size from the correct notify struct.
Doesn't affect any visible behaviour because the field values are the
same (both are 4).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
event_notifier_init() can fail in real life, for example when there
are not enough open file handles available (EMFILE) when using a lot
of devices. So instead of leaving the average user with a cryptic
error number only, print out a proper error message with strerror()
instead, so that the user has a better way to figure out what is
going on and that using "ulimit -n" might help here for example.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Simplify a bit the code by using g_strdup_printf() and store it in a
non-const value so casting is no longer needed, and ownership is
clearer.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Free the timer allocated in instance_init.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Further cleanup would need to call qemu_free_irq() at the appropriate
time, but for now this silences ASAN about direct leaks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
The free_ranges array is used as a temporary pointer array, the segment
should still be freed, however, it shouldn't free the elements themself.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
machine_class_base_init() member name is allocated by
machine_class_base_init(), but not freed by
machine_class_finalize(). Simply freeing there doesn't work,
because DEFINE_PC_MACHINE() overwrites it with a literal string.
Fix DEFINE_PC_MACHINE() not to overwrite it, and add the missing
free to machine_class_finalize().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
qemu_irq is already a pointer, no need to have an extra pointer level.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The isa_register_portio_list() function allocates ioports
data/state. Let's keep the reference to this data on some owner. This
isn't enough to fix leaks, but at least, ASAN stops complaining of
direct leaks. Further cleanup would require calling
portio_list_del/destroy().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This is my first pull request for the newly opened qemu-2.8 tree. It
contains a heap of things that were too late for 2.7 and have been
queued for a while. In particular:
* A number of preliminary patches for the powernv machine type
* A substantial cleanup of exception handling which will be
necessary to support running a TCG with hypervisor
facilities
* A start on support for POWER9
* Some TCG implementations for new POWER9 instructions
* Some TCG and related cleanups in preparation for POWER9
* Some assorted TCG optimizations
* An implementation of the H_CHANGE_LOGICAL_LAN_MAC hypercall
which allows the MAC address to be changed on the PAPR virtual
NIC.
* Add some extra test cases for several machines (this isn't
strictly in the ppc code, but is most value to ppc)
NOTE: This pull request supersedes ppc-for-2.8-20160906, which had
some problems. Changes:
* Dropped BenH's lmw/stmw speedups, which break for
qemu-system-ppc64 on BE hosts
* A small fix to Thomas' serial output test to avoid a warning on
the isapc machine type.
* Some trivial checkpatch fixes
Note that some of the patches in this series still have large numbers
of checkpatch warnings. This is because they're moving existing code
that predates most of the checkpatch style conventions.
-----BEGIN PGP SIGNATURE-----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=T1rz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20160907' into staging
ppc patch queue for 2016-Sep-7
This is my first pull request for the newly opened qemu-2.8 tree. It
contains a heap of things that were too late for 2.7 and have been
queued for a while. In particular:
* A number of preliminary patches for the powernv machine type
* A substantial cleanup of exception handling which will be
necessary to support running a TCG with hypervisor
facilities
* A start on support for POWER9
* Some TCG implementations for new POWER9 instructions
* Some TCG and related cleanups in preparation for POWER9
* Some assorted TCG optimizations
* An implementation of the H_CHANGE_LOGICAL_LAN_MAC hypercall
which allows the MAC address to be changed on the PAPR virtual
NIC.
* Add some extra test cases for several machines (this isn't
strictly in the ppc code, but is most value to ppc)
NOTE: This pull request supersedes ppc-for-2.8-20160906, which had
some problems. Changes:
* Dropped BenH's lmw/stmw speedups, which break for
qemu-system-ppc64 on BE hosts
* A small fix to Thomas' serial output test to avoid a warning on
the isapc machine type.
* Some trivial checkpatch fixes
Note that some of the patches in this series still have large numbers
of checkpatch warnings. This is because they're moving existing code
that predates most of the checkpatch style conventions.
# gpg: Signature made Wed 07 Sep 2016 07:09:27 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20160907: (64 commits)
tests: Check serial output of firmware boot of some machines
tests: Resort check-qtest entries in Makefile.include
spapr: implement H_CHANGE_LOGICAL_LAN_MAC h_call
ppc: Improve a few more helper flags
ppc: Improve the exception helpers flags
ppc: Improve flags for helpers loading/writing the time facilities
ppc: Don't generate dead code on unconditional branches
ppc: Stop dumping state on all exceptions in linux-user
ppc: Fix catching some segfaults in user mode
ppc: Fix macio ESCC legacy mapping
hw/ppc: add a ppc_create_page_sizes_prop() helper routine
hw/ppc: use error_report instead of fprintf
ppc: Rename #include'd .c files to .inc.c
target-ppc: add extswsli[.] instruction
target-ppc: add vsrv instruction
target-ppc: add vslv instruction
target-ppc: add vcmpnez[b,h,w][.] instructions
target-ppc: add vabsdu[b,h,w] instructions
target-ppc: add dtstsfi[q] instructions
target-ppc: implement branch-less divd[o][.]
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since kernel v4.0, linux uses H_CHANGE_LOGICAL_LAN_MAC to change lively
the MAC address of an ibmveth interface.
As QEMU doesn't implement this h_call, we can't change anymore the
MAC address of an spapr-vlan interface.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current mapping, while correct for the base ports (which is all the
driver uses these days), is wrong for the extended registers.
I suspect the bugs come from incorrect tables in the CHRP IO Ref document,
I have verified the new values here match Apple's MacTech.pdf.
Note: Nothing that I know of actually uses these registers so it's not a
huge deal, but this patch has the added advantage of adding comments to
document what the registers are.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The exact same routine will be used in PowerNV.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_pci would also be a good candidate but the macro _FDT is
slightly different. It returns and does not exit.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We abort a few lines above if kernel_xics_fd == -1.
This is only code cleanup.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Correct bad name of the vmstate structure. Since this breaks
compatibility also update vmstate version back to 0 and make
all fields independent of the VMState version.
Signed-off-by: Marcin Krzeminski <marcin.krzeminski@nokia.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1473146346-27337-1-git-send-email-marcin.krzeminski@nokia.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Current QEMU will stall guest VM booting under ACPI mode when vcpu count
is >= 12. Analyzing the booting log, it turns out that DSDT table can't
be loaded correctly due to "Invalid character(s) in name (0x62303043),
repaired: [C00*]". This is because existing QEMU uses a lower case AML
ID for CPU devices (e.g. C000, C001, ..., C00a, C00b). The ACPI code
inside guest VM detects this lower case character as an invalid character
(see acpi_ut_valid_acpi_char() in drivers/acpi/acpica/utstring.c file)
and converts it to "*". This causes duplicated IDs (i.e. "C00a" ==>"C00*"
and "C00b" ==> "C00*"). So ACPI refuses to load the table.
This patch fixes the problem by changing the format with a upper case
character. It matches the CPU ID formats used in other parts of QEMU
code.
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1472852809-23042-1-git-send-email-wei@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The uboot in the previous release of the SDK was using a hardcoded
value for memory size. This is not true anymore, the value is now
retrieved from the memory controller.
Below is a model for this device, only supporting unlock and
configuration. Without it, we endup running a guest with 64MB, which
is a bit low nowdays. It uses a 'silicon-rev' property and ram_size to
build a default value. Some bits should be linked to SCU strapping
registers but it seems a bit complex to add for the current need.
The model is ready for the AST2500 SOC.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=LZpU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Tue 06 Sep 2016 11:38:01 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (36 commits)
block: Allow node name for 'qemu-io' HMP command
qemu-iotests: Log QMP traffic in debug mode
block jobs: Improve error message for missing job ID
coroutine: Assert that no locks are held on termination
coroutine: Let CoMutex remember who holds it
qcow2: fix iovec size at qcow2_co_pwritev_compressed
test-coroutine: Fix coroutine pool corruption
qemu-iotests: add vmdk for test backup compression in 055
qemu-iotests: test backup compression in 055
blockdev-backup: added support for data compression
drive-backup: added support for data compression
block: simplify blockdev-backup
block: simplify drive-backup
block/io: turn on dirty_bitmaps for the compressed writes
block: remove BlockDriver.bdrv_write_compressed
qcow: cleanup qcow_co_pwritev_compressed to avoid the recursion
qcow: add qcow_co_pwritev_compressed
vmdk: add vmdk_co_pwritev_compressed
qcow2: cleanup qcow2_co_pwritev_compressed to avoid the recursion
qcow2: add qcow2_co_pwritev_compressed
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- cpumodel support for s390x
- various fixes and improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hiH2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20160906-v2' into staging
First (big) chunk of s390x updates:
- cpumodel support for s390x
- various fixes and improvements
# gpg: Signature made Tue 06 Sep 2016 16:09:53 BST
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20160906-v2: (38 commits)
s390x/cpumodel: implement QMP interface "query-cpu-model-baseline"
s390x/cpumodel: implement QMP interface "query-cpu-model-comparison"
s390x/cpumodel: implement QMP interface "query-cpu-model-expansion"
qmp: add QMP interface "query-cpu-model-baseline"
qmp: add QMP interface "query-cpu-model-comparison"
qmp: add QMP interface "query-cpu-model-expansion"
s390x/kvm: don't enable key wrapping if msa3 is disabled
s390x/kvm: let the CPU model control CMM(A)
s390x/kvm: disable host model for problematic compat machines
s390x/kvm: implement CPU model support
s390x/kvm: allow runtime-instrumentation for "none" machine
s390x/sclp: propagate hmfai
s390x/sclp: propagate the mha via sclp
s390x/sclp: propagate the ibc val (lowest and unblocked ibc)
s390x/sclp: indicate sclp features
s390x/sclp: introduce sclp feature blocks
s390x/sclp: factor out preparation of cpu entries
s390x/cpumodel: check and apply the CPU model
s390x/cpumodel: let the CPU model handle feature checks
s390x/cpumodel: expose features and feature groups as properties
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To be able to query the correct host model for the "none" machine,
let's allow runtime-instrumentation for that machine.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-21-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The mha is provided in the CPU model, so get any CPU and extract the value.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-18-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If we have a lowest ibc, we can indicate the ibc to the guest.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-17-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We have three different blocks in the SCLP read-SCP information response
that indicate sclp features. Let's prepare propagation.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-16-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's factor out the common code of "read cpu info" and "read scp
info". This will make the introduction of new cpu entry fields easier.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-14-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch introduces two CPU models, "host" and "qemu".
"qemu" is used as default when running under TCG. "host" is used
as default when running under KVM. "host" cannot be used without KVM.
"host" is not migration-safe. They both inherit from the base s390x CPU,
which is turned into an abstract class.
This patch also changes CPU creation to take care of the passed CPU string
and reuses common code parse_features() function for that purpose. Unknown
CPU definitions are now reported. The "-cpu ?" and "query-cpu-definition"
commands are changed to list all CPU subclasses automatically, including
migration-safety and whether static.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-3-dahi@linux.vnet.ibm.com>
[CH: fix up self-assignments in s390_cpu_list, as spotted by clang]
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This allows the creation of an empty scsi-cd device without manually
creating a BlockBackend.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This allows the creation of an empty ide-cd device without manually
creating a BlockBackend.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Eric Blake <eblake@redhat.com>
The cssid 255 is reserved but still valid from an architectural
point of view. However, feeding a bogus schid of 0xffffffff into
the virtio hypercall will lead to a crash:
Stack trace of thread 138363:
#0 0x00000000100d168c css_find_subch (qemu-system-s390x)
#1 0x00000000100d3290 virtio_ccw_hcall_notify
#2 0x00000000100cbf60 s390_virtio_hypercall
#3 0x000000001010ff7a handle_hypercall
#4 0x0000000010079ed4 kvm_cpu_exec (qemu-system-s390x)
#5 0x00000000100609b4 qemu_kvm_cpu_thread_fn
#6 0x000003ff8b887bb4 start_thread (libpthread.so.0)
#7 0x000003ff8b78df0a thread_start (libc.so.6)
This is because the css array was only allocated for 0..254
instead of 0..255.
Let's fix this by bumping MAX_CSSID to 255 and fencing off the
reserved cssid of 255 during css image allocation.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
With the current code a simple sclp command takes about 13000 ns
The biggest part seems to be the resolver of the object model. By
caching the sclp device the time for an sclp command goes down to
2500ns. Talking about real life scenarios, this change doubles
the speed of the sclp console when sending single bytes outputs
to /dev/console.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If one pci device is plugged successfully, there must be a zpci device
existing. This means that during hot-unplugging a pci device, its
corresponding zpci device must be found. Therefore we use an assert to
replace current code.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
In the case that zpci is automatically created, we did not return
immediately on failure, which would lead to NULL pointer dereferencing.
Let's fix it.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The qdisk implementation is using the native xenbus protocol only in
case of no protocol specified at all. As using the explicit 32- or
64-bit protocol is slower than the native one due to copying requests
not by memcpy but element for element, this is not optimal.
Correct this by using the native protocol in case word sizes of
frontend and backend match.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
The 9P spec at http://man.cat-v.org/plan_9/5/intro says:
All directories must support walks to the directory .. (dot-dot) meaning
parent directory, although by convention directories contain no explicit
entry for .. or . (dot). The parent of the root directory of a server's
tree is itself.
This means that a client cannot walk further than the root directory
exported by the server. In other words, if the client wants to walk
"/.." or "/foo/../..", the server should answer like the request was
to walk "/".
This patch just does that:
- we cache the QID of the root directory at attach time
- during the walk we compare the QID of each path component with the root
QID to detect if we're in a "/.." situation
- if so, we skip the current component and go to the next one
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the 9P spec http://man.cat-v.org/plan_9/5/open about the
create request:
The names . and .. are special; it is illegal to create files with these
names.
This patch causes the create and lcreate requests to fail with EINVAL if
the file name is either "." or "..".
Even if it isn't explicitly written in the spec, this patch extends the
checking to all requests that may cause a directory entry to be created:
- mknod
- rename
- renameat
- mkdir
- link
- symlink
The unlinkat request also gets patched for consistency (even if
rmdir("foo/..") is expected to fail according to POSIX.1-2001).
The various error values come from the linux manual pages.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Empty path components don't make sense for most commands and may cause
undefined behavior, depending on the backend.
Also, the walk request described in the 9P spec [1] clearly shows that
the client is supposed to send individual path components: the official
linux client never sends portions of path containing the / character for
example.
Moreover, the 9P spec [2] also states that a system can decide to restrict
the set of supported characters used in path components, with an explicit
mention "to remove slashes from name components".
This patch introduces a new name_is_illegal() helper that checks the
names sent by the client are not empty and don't contain unwanted chars.
Since 9pfs is only supported on linux hosts, only the / character is
checked at the moment. When support for other hosts (AKA. win32) is added,
other chars may need to be blacklisted as well.
If a client sends an illegal path component, the request will fail and
ENOENT is returned to the client.
[1] http://man.cat-v.org/plan_9/5/walk
[2] http://man.cat-v.org/plan_9/5/intro
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtqueue_discard() moves vq->last_avail_idx back so the element can be
popped again. It's necessary to decrement vq->inuse to avoid "leaking"
the element count.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vq->inuse field is not migrated. Many devices don't hold
VirtQueueElements across migration so it doesn't matter that vq->inuse
starts at 0 on the destination QEMU.
At least virtio-serial, virtio-blk, and virtio-balloon migrate while
holding VirtQueueElements. For these devices we need to recalculate
vq->inuse upon load so the value is correct.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 66bf7d58 removed internal msi state flag E1000E_USE_MSI, E1000E_USE_MSIX
is not necessary too, remove it now. And interrupt flag field intr_state also
can be removed now.
CC: Dmitry Fleytman <dmitry@daynix.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
