Timestamps in tracing output can be distracting. Make it possible to
control tid/timestamp printing with -msg timestamp=on|off. The default
is no tid/timestamps. Previously they were always printed.
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210125113507.224287-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
macro is not reset after use, so the format decoded is always the
one of the first "PRI" in the format string.
For instance:
vhost_vdpa_set_config(void *dev, uint32_t offset, uint32_t size, \
uint32_t flags) "dev: %p offset: %"PRIu32" \
size: %"PRIu32" flags: 0x%"PRIx32
generates:
printf("%d@%d vhost_vdpa_set_config dev: %p offset: %u size: %u \
flags: 0x%u\n", pid(), gettimeofday_ns(), dev, offset, \
size, flags)
for the "flags" parameter, we can see a "0x%u" rather than a "0x%x"
because the first macro was "PRIu32" (for offset).
In the loop, macro becomes "PRIu32PRIu32PRIx32", and c_macro_to_format()
returns always macro[3] ('u' in this case). This patch resets macro after
the format has been decoded.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210105191721.120463-3-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The compiler encounters trace event format strings in generated code.
Format strings are error-prone and therefore clear compiler errors are
important.
Use the #line directive to show the trace-events filename and line
number in format string errors:
https://gcc.gnu.org/onlinedocs/gcc-10.2.0/cpp/Line-Control.html
For example, if the cpu_in trace event's %u is changed to %p the
following error is reported:
trace-events:29:18: error: format ‘%p’ expects argument of type ‘void *’, but argument 7 has type ‘unsigned int’ [-Werror=format=]
Line 29 in trace-events is where cpu_in is defined. This works for any
trace-events file in the QEMU source tree and the correct path is
displayed.
Unfortunately there does not seem to be a way to set the column, so "18"
is not the right character on that line.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827142915.108730-5-stefanha@redhat.com>
Store the input filename and line number in Event.
A later patch will use this to improve error messages.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827142915.108730-4-stefanha@redhat.com>
Make the output file line number and next line number available to
out().
A later patch will use this to improve error messages.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827142915.108730-3-stefanha@redhat.com>
The tracetool.py script writes to stdout. This means the output filename
is not available to the script. Add the output filename to the
command-line so that the script has access to the filename.
This also simplifies the tracetool.py invocation. It's no longer
necessary to use meson's custom_build(capture : true) to save output.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827142915.108730-2-stefanha@redhat.com>
SystemTap's dtrace(1) prints the following warning when it encounters
long long arguments:
Warning: /usr/bin/dtrace:trace/trace-dtrace-hw_virtio.dtrace:76: syntax error near:
probe vhost_vdpa_dev_start
Warning: Proceeding as if --no-pyparsing was given.
Use the uint64_t and int64_t types, respectively. This works with all
host CPU 32- and 64-bit data models (ILP32, LP64, and LLP64) that QEMU
supports.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201020094043.159935-1-stefanha@redhat.com
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the scripts folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200917075029.313-5-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
dtrace on macOS complains that CPUState * is used for a few probes:
dtrace: failed to compile script trace-dtrace-root.dtrace: line 130: syntax error near "CPUState"
A comment in scripts/tracetool/__init__.py mentions that:
We only want to allow standard C types or fixed sized
integer types. We don't want QEMU specific types
as we can't assume trace backends can resolve all the
typedefs
Fixes: 3d211d9f4d ("trace: Add 'vcpu' event property to trace guest vCPU")
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-id: 20200717093517.73397-3-r.bolshakov@yadro.com
Cc: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
dtrace USDT is fully supported since OS X 10.6. There are a few
peculiarities compared to other dtrace flavors.
1. It doesn't accept empty files.
2. It doesn't recognize bool type but accepts C99 _Bool.
3. It converts int8_t * in probe points to char * in
header files and introduces [-Wpointer-sign] warning.
Cc: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200717093517.73397-2-r.bolshakov@yadro.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This shows how to do some "computations" in meson.build using its array
and dictionary data structures, and also a basic usage of the sourceset
module for conditional compilation.
Notice the new "if have_system" part of util/meson.build, which fixes
a bug in the old build system was buggy: util/dbus.c was built even for
non-softmmu builds, but the dependency on -lgio was lost when the linking
was done through libqemuutil.a. Because all of its users required gio
otherwise, the bug was hidden. Meson instead propagates libqemuutil's
dependencies down to its users, and shows the problem.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The dtrace backend defines SDT_USE_VARIADIC as a workaround for a
conflict with a LTTng UST header file, which requires SDT_USE_VARIADIC
to be defined.
LTTng UST <lttng/tracepoint.h> breaks if included after generated dtrace
headers because SDT_USE_VARIADIC will already be defined:
#ifdef LTTNG_UST_HAVE_SDT_INTEGRATION
#define SDT_USE_VARIADIC <-- error, it's already defined
#include <sys/sdt.h>
Be more careful when defining SDT_USE_VARIADIC. This fixes the build
when both the dtrace and ust tracers are enabled at the same time.
Fixes: 27e08bab94 ("tracetool: work around ust <sys/sdt.h> include conflict")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200729153926.127083-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Both the dtrace and ust backends may include <sys/sdt.h> but LTTng
Userspace Tracer 2.11 and later requires SDT_USE_VARIADIC to be defined
before including the header file.
This is a classic problem with C header files included from different
parts of a program. If the same header is included twice within the same
compilation unit then the first inclusion determines the macro
environment.
Work around this by defining SDT_USE_VARIADIC in the dtrace backend too.
It doesn't hurt and fixes a missing STAP_PROBEV() compiler error when
the ust backend is enabled together with the dtrace backend.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200625140757.237012-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There is an effort in progress to generate a QEMU Python
package. As I'm not sure this old email is still valid,
update it to not produce package with broken maintainer
email.
Patch created mechanically by running:
$ sed -i 's,\(__email__ *= "\)stefanha@linux.vnet.ibm.com",\1stefanha@redhat.com",' \
$(git grep -l 'email.*stefanha@linux.vnet.ibm.com')
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200511082816.696-1-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We are going to re-use mem_info later for plugins and will need to
track the mmu_idx for softmmu code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The following statement produces a SyntaxWarning with Python 3.8:
if len(format) is 0:
scripts/tracetool/__init__.py:459: SyntaxWarning: "is" with a literal. Did you mean "=="?
Use the conventional len(x) == 0 syntax instead.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191010122154.10553-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Event format ending with newlines confuse the trace reports.
Forbid them.
Add a check to refuse new format added with trailing newline:
$ make
[...]
GEN hw/misc/trace.h
Traceback (most recent call last):
File "scripts/tracetool.py", line 152, in <module>
main(sys.argv)
File "scripts/tracetool.py", line 143, in main
events.extend(tracetool.read_events(fh, arg))
File "scripts/tracetool/__init__.py", line 367, in read_events
event = Event.build(line)
File "scripts/tracetool/__init__.py", line 281, in build
raise ValueError("Event format can not end with a newline character")
ValueError: Error at hw/misc/trace-events:121: Event format can not end with a newline character
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190916095121.29506-3-philmd@redhat.com
Message-Id: <20190916095121.29506-3-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
docs/devel/tracing.txt explains "since many source files include
trace.h, [the generated trace.h use] a minimum of types and other
header files included to keep the namespace clean and compile times
and dependencies down."
Commit 4815185902 "trace: Add per-vCPU tracing states for events with
the 'vcpu' property" made them all include qom/cpu.h via
control-internal.h. qom/cpu.h in turn includes about thirty headers.
Ouch.
Per-vCPU tracing is currently not supported in sub-directories'
trace-events. In other words, qom/cpu.h can only be used in
trace-root.h, not in any trace.h.
Split trace/control-vcpu.h off trace/control.h and
trace/control-internal.h. Have the generated trace.h include
trace/control.h (which no longer includes qom/cpu.h), and trace-root.h
include trace/control-vcpu.h (which includes it).
The resulting improvement is a bit disappointing: in my "build
everything" tree, some 1100 out of 6600 objects (not counting tests
and objects that don't depend on qemu/osdep.h) depend on a trace.h,
and about 600 of them no longer depend on qom/cpu.h. But more than
1300 others depend on trace-root.h. More work is clearly needed.
Left for another day.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-8-armbru@redhat.com>
hw/tpm/trace-events uses TARGET_FMT_plx formats with uint64_t
arguments. That's wrong, TARGET_FMT_plx takes hwaddr. Since hwaddr
happens to be uint64_t, it works anyway. Messed up in commit
ec427498da, v2.12.0. Clean up by replacing TARGET_FMT_plx with its
macro expansion.
scripts/tracetool/format/log_stap.py (commit 62dd1048c0, v4.0.0) has
a special case for TARGET_FMT_plx. Delete it.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190812052359.30071-7-armbru@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/hppa/trace-events only contains disabled events, resulting in a
trace-dtrace.dtrace file that says "provider qemu {}". SystemTap's
dtrace(1) tool prints a warning when processing this input file.
This patch avoids the error by emitting an empty file instead of
"provider qemu {}" when there are no enabled trace events.
Fixes: 23c3d569f4 ("target/hppa: add TLB trace events")
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-id: 20190321170831.6539-3-stefanha@redhat.com
Message-Id: <20190321170831.6539-3-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The dtrace systemtap trace backend for QEMU is very powerful but it is
also somewhat unfriendly to users who aren't familiar with systemtap,
or who don't need its power right now.
stap -e "....some strange script...."
The 'log' backend for QEMU by comparison is very crude but incredibly
easy to use:
$ qemu -d trace:qio* ...some args...
23266@1547735759.137292:qio_channel_socket_new Socket new ioc=0x563a8a39d400
23266@1547735759.137305:qio_task_new Task new task=0x563a891d0570 source=0x563a8a39d400 func=0x563a86f1e6c0 opaque=0x563a89078000
23266@1547735759.137326:qio_task_thread_start Task thread start task=0x563a891d0570 worker=0x563a86f1ce50 opaque=0x563a891d9d90
23273@1547735759.137491:qio_task_thread_run Task thread run task=0x563a891d0570
23273@1547735759.137503:qio_channel_socket_connect_sync Socket connect sync ioc=0x563a8a39d400 addr=0x563a891d9d90
23273@1547735759.138108:qio_channel_socket_connect_fail Socket connect fail ioc=0x563a8a39d400
This commit introduces a way to do simple printf style logging of probe
points using systemtap. In particular it creates another set of tapsets,
one per emulator:
/usr/share/systemtap/tapset/qemu-*-log.stp
These pre-define probe functions which simply call printf() on their
arguments. The printf() format string is taken from the normal
trace-events files, with a little munging to the format specifiers
to cope with systemtap's more restrictive syntax.
With this you can now do
$ stap -e 'probe qemu.system.x86_64.log.qio*{}'
22806@1547735341399856820 qio_channel_socket_new Socket new ioc=0x56135d1d7c00
22806@1547735341399862570 qio_task_new Task new task=0x56135cd66eb0 source=0x56135d1d7c00 func=0x56135af746c0 opaque=0x56135bf06400
22806@1547735341399865943 qio_task_thread_start Task thread start task=0x56135cd66eb0 worker=0x56135af72e50 opaque=0x56135c071d70
22806@1547735341399976816 qio_task_thread_run Task thread run task=0x56135cd66eb0
We go one step further though and introduce a 'qemu-trace-stap' tool to
make this even easier
$ qemu-trace-stap run qemu-system-x86_64 'qio*'
22806@1547735341399856820 qio_channel_socket_new Socket new ioc=0x56135d1d7c00
22806@1547735341399862570 qio_task_new Task new task=0x56135cd66eb0 source=0x56135d1d7c00 func=0x56135af746c0 opaque=0x56135bf06400
22806@1547735341399865943 qio_task_thread_start Task thread start task=0x56135cd66eb0 worker=0x56135af72e50 opaque=0x56135c071d70
22806@1547735341399976816 qio_task_thread_run Task thread run task=0x56135cd66eb0
This tool is clever in that it will automatically change the
SYSTEMTAP_TAPSET env variable to point to the directory containing the
right set of probes for the QEMU binary path you give it. This is useful
if you have QEMU installed in /usr but are trying to test and trace a
binary in /home/berrange/usr/qemu-git. In that case you'd do
$ qemu-trace-stap run /home/berrange/usr/qemu-git/bin/qemu-system-x86_64 'qio*'
And it'll make sure /home/berrange/usr/qemu-git/share/systemtap/tapset
is used for the trace session
The 'qemu-trace-stap' script takes a verbose arg so you can understand
what it is running
$ qemu-trace-stap run /home/berrange/usr/qemu-git/bin/qemu-system-x86_64 'qio*'
Using tapset dir '/home/berrange/usr/qemu-git/share/systemtap/tapset' for binary '/home/berrange/usr/qemu-git/bin/qemu-system-x86_64'
Compiling script 'probe qemu.system.x86_64.log.qio* {}'
Running script, <Ctrl>-c to quit
...trace output...
It can enable multiple probes at once
$ qemu-trace-stap run qemu-system-x86_64 'qio*' 'qcrypto*' 'buffer*'
By default it monitors all existing running processes and all future
launched proceses. This can be restricted to a specific PID using the
--pid arg
$ qemu-trace-stap run --pid 2532 qemu-system-x86_64 'qio*'
Finally if you can't remember what probes are valid it can tell you
$ qemu-trace-stap list qemu-system-x86_64
ahci_check_irq
ahci_cmd_done
ahci_dma_prepare_buf
ahci_dma_prepare_buf_fail
ahci_dma_rw_buf
ahci_irq_lower
...snip...
Or list just those matching a prefix pattern
$ qemu-trace-stap list -v qemu-system-x86_64 'qio*'
Using tapset dir '/home/berrange/usr/qemu-git/share/systemtap/tapset' for binary '/home/berrange/usr/qemu-git/bin/qemu-system-x86_64'
Listing probes with name 'qemu.system.x86_64.log.qio*'
qio_channel_command_abort
qio_channel_command_new_pid
qio_channel_command_new_spawn
qio_channel_command_wait
qio_channel_file_new_fd
...snip...
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190123120016.4538-5-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The '%m' format instructs glibc's printf()/syslog() implementation to
insert the contents of strerror(errno). Since this is a glibc extension
it should generally be avoided in QEMU due to need for portability to a
variety of platforms.
Even though vfio is Linux-only code that could otherwise use "%m", it
must still be avoided in trace-events files because several of the
backends do not use the format string and so this error information is
invisible to them.
The errno string value should be given as an explicit trace argument
instead, making it accessible to all backends. This also allows it to
work correctly with future patches that use the format string with
systemtap's simple printf code.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190123120016.4538-4-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When generating the trace-events-all file, the build system simply
concatenates all the individual trace-events files. If any one of those
files does not have a final newline, the printf format string will have
the contents of the first line of the next file appended to it, which is
usually a '#' comment.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190123120016.4538-3-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently the log backend prints the process id of QEMU at the start
of each output line, but since threads share the same PID there is no
clear distinction between their outputs.
Having the thread id present in the log makes it easier to see when
output comes from different threads. E.g.:
12423@1538597569.672527:qemu_mutex_lock waiting on mutex 0x1103ee60 (/root/qemu/util/main-loop.c:236)
...
12430@1538597569.503928:qemu_mutex_unlock released mutex 0x1103ee60 (/root/qemu/cpus.c:1238)
12431@1538597569.503937:qemu_mutex_locked taken mutex 0x1103ee60 (/root/qemu/cpus.c:1257)
^here
In the above, 12423 is the main process id and 12430 & 12431 are the
two vcpu threads.
(qemu) info cpus
* CPU #0: thread_id=12430
CPU #1: thread_id=12431
Suggested-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes when using GCC with -Wformat-signedness:
migration/trace.h: In function ‘_nocheck__trace_dirty_bitmap_load_success’:
migration/trace.h:6368:24: error: format ‘%zd’ expects argument of type ‘signed size_t’, but argument 3 has type ‘long unsigned int’ [-Werror=format=]
qemu_log("%d@%zd.%06zd:dirty_bitmap_load_success " "" "\n",
~~^
%ld
migration/trace.h:6370:18:
(size_t)_now.tv_sec, (size_t)_now.tv_usec
~~~~~~~~~~~~~~~~~~~
migration/trace.h:6368:30: error: format ‘%zd’ expects argument of type ‘signed size_t’, but argument 4 has type ‘long unsigned int’ [-Werror=format=]
qemu_log("%d@%zd.%06zd:dirty_bitmap_load_success " "" "\n",
~~~~^
%06ld
migration/trace.h:6370:39:
(size_t)_now.tv_sec, (size_t)_now.tv_usec
~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Only one existing trace event uses a floating point type. Unfortunately
float and double cannot be supported since SystemTap does not have
floating point types.
Remove float and double from the whitelist and document this limitation.
Update the migrate_transferred trace event to use uint64_t instead of
double.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20180621150254.4922-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some trace backends will compile code based on the declared trace
events. It should not be assumed that the backends can resolve any QEMU
specific typedefs. So trace events should restrict their argument
types to the standard C types and fixed size integer types. Any complex
pointer types can be declared as "void *" for purposes of trace events,
since nothing will be dereferencing these pointer arguments.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180308155524.5082-3-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Improves error messages from:
ValueError: Error on line 72: need more than 1 value to unpack
To
ValueError: Error at /home/berrange/src/virt/qemu/trace-events:72:
need more than 1 value to unpack
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180306154650.24075-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A persistent build problem we see is where a source file
accidentally omits the #include of log.h. This slips through
local developer testing because if you configure with the
default (log) trace backend trace.h will pull in log.h for you.
Compilation fails only if some other backend is selected.
To make this error cause a compile failure regardless of
the configured trace backend, split out the parts of log.h
that trace.h requires into a new log-for-trace.h header.
Since almost all manual uses of the log.h functions will
use constants or functions which aren't in log-for-trace.h,
this will let us catch missing #include "qemu/log.h" more
consistently.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180213140029.8308-1-peter.maydell@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Previously functions having arguments of type bool was not traced
properly. The bool arguments were missing from the trace.
Signed-off-by: Jon Emil Jahren <jonemilj@gmail.com>
Message-id: 20180129041648.30884-3-jonemilj@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using the greedy star matching, arguments like "...%"PRIx64 caused issues
for functions with multiple PRI formats.
The issue was only seen with the ust backend, as it is the only one
using the format regex.
The result for many functions was that the arguments coming after the
greedy star end was left out of the tracepoint, and in some cases some
of the arguments that was traced had the wrong format.
Signed-off-by: Jon Emil Jahren <jonemilj@gmail.com>
Message-id: 20180129041648.30884-2-jonemilj@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
C functions with no arguments must be declared foo(void) instead of
foo(). The tracetool argument list parser has never accepted an empty
argument list. This patch adds a clear error message for this error
case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180110202553.31889-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The terminology used by tracetool is not consistent with C sprintf or
docs/devel/tracing.txt. The word "formats" is sometimes used to mean
"format strings".
This patch clarifies comments and error messages that contain this word.
Note that the error message lines are longer than 80 characters but I
have not wrapped them to aid grepping.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180110202553.31889-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Include the file line number in the message that is printed when
trace-events parse errors are raised.
[Use enumerate(fobj, 1) to avoid having to increment a 0-based index
later, as suggested by Eric Blake.
--Stefan]
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180110202553.31889-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is a partial revert of commit
7f1b588f20 ("trace: emit name <-> ID
mapping in simpletrace header"), which broke the SystemTap flight
recorder because event mapping records may not be present in the ring
buffer when the trace is analyzed. This means simpletrace.py
--no-header does not know the event ID mapping needed to pretty-print
the trace.
Instead of numbering events dynamically, use a static event ID mapping
as dictated by the event order in the trace-events-all file.
The simpletrace.py script also uses trace-events-all so the next patch
will fix the simpletrace.py --no-header option to take advantage of this
knowledge.
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170815084430.7128-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
QEMU keeps track of trace event enabled/disabled state and provides
monitor commands to inspect and modify the "dstate". SystemTap and
LTTng UST maintain independent enabled/disabled states for each trace
event, the other backends rely on QEMU dstate.
Introduce a new per-event macro that combines backend-specific dstate
like this:
#define TRACE_MY_EVENT_BACKEND_DSTATE() ( \
QEMU_MY_EVENT_ENABLED() || /* SystemTap */ \
tracepoint_enabled(qemu, my_event) /* LTTng UST */ || \
false)
This will be used to extend trace_event_get_state() in the next patch.
[Daniel Berrange pointed out that QEMU_MY_EVENT_ENABLED() must be true
by default, not false. This way events will fire even if the DTrace
implementation does not implement the SystemTap semaphores feature.
Ubuntu Precise uses lttng-ust-dev 2.0.2 which does not have
tracepoint_enabled(), so we need a compatibility wrapper to keep Travis
builds passing.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170731140718.22010-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
fixup! trace: add TRACE_<event>_BACKEND_DSTATE()
The simpletrace compatibility code for systemtap creates a
function and some global variables for mapping to event ID
numbers. We generate multiple -simpletrace.stp files though,
one per target and systemtap considers functions & variables
to be globally scoped, not per file. So if trying to use the
simpletrace compat probes, systemtap will complain:
# stap -e 'probe qemu.system.arm.simpletrace.visit_type_str { print( "hello")}'
semantic error: conflicting global variables: identifier 'event_name_to_id_map' at /usr/share/systemtap/tapset/qemu-aarch64-simpletrace.stp:3:8
source: global event_name_to_id_map
^
identifier 'event_name_to_id_map' at /usr/share/systemtap/tapset/qemu-system-arm-simpletrace.stp:3:8
source: global event_name_to_id_map
^
WARNING: cross-file global variable reference to identifier 'event_name_to_id_map' at /usr/share/systemtap/tapset/qemu-system-arm-simpletrace.stp:3:8 from: identifier 'event_name_to_id_map' at /usr/share/systemtap/tapset/qemu-aarch64-simpletrace.stp:8:21
source: if (!([name] in event_name_to_id_map)) {
^
WARNING: cross-file global variable reference to identifier 'event_next_id' at /usr/share/systemtap/tapset/qemu-system-arm-simpletrace.stp:4:8 from: identifier 'event_next_id' at :9:38
source: event_name_to_id_map[name] = event_next_id
^
We already have a string used to prefix probe names, so just
replace '.' with '_' to get a function / variable name prefix
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170728133657.5525-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Last patch removed a nesting level in generated code. Re-align all code
generated by backends to be 4-column aligned.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 149915824586.6295.17820926011082409033.stgit@frigg.lan
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If an event is dynamically disabled, the TCG code that calls the
execution-time tracer is not generated.
Removes the overheads of execution-time tracers for dynamically disabled
events. As a bonus, also avoids checking the event state when the
execution-time tracer is called from TCG-generated code (since otherwise
TCG would simply not call it).
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 149915799921.6295.13067154430923434035.stgit@frigg.lan
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The UST trace backend can only cope with upto 10 arguments. To ensure we
don't exceed the limit when UST is not compiled in, disallow more than
10 arguments upfront.
This prevents the case where:
commit 0fc8aec7de
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Apr 18 10:20:20 2017 +0800
COLO-compare: Optimize tcp compare trace event
Optimize two trace events as one, adjust print format make
it easy to read. rename trace_colo_compare_pkt_info_src/dst
to trace_colo_compare_tcp_info.
regressed the fix done in
commit 2dfe5113b1
Author: Alex Bennée <alex.bennee@linaro.org>
Date: Fri Oct 28 14:25:59 2016 +0100
net: split colo_compare_pkt_info into two trace events
It seems there is a limit to the number of arguments a UST trace event
can take and at 11 the previous trace command broke the build. Split the
trace into a src pkt and dst pkt trace to fix this.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20161028132559.8324-1-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now we get an immediate fail even when UST is disabled:
GEN net/trace.h
Traceback (most recent call last):
File "/home/berrange/src/virt/qemu/scripts/tracetool.py", line 154, in <module>
main(sys.argv)
File "/home/berrange/src/virt/qemu/scripts/tracetool.py", line 145, in main
events.extend(tracetool.read_events(fh))
File "/home/berrange/src/virt/qemu/scripts/tracetool/__init__.py", line 307, in read_events
event = Event.build(line)
File "/home/berrange/src/virt/qemu/scripts/tracetool/__init__.py", line 244, in build
event = Event(name, props, fmt, args)
File "/home/berrange/src/virt/qemu/scripts/tracetool/__init__.py", line 196, in __init__
"argument count" % name)
ValueError: Event 'colo_compare_tcp_info' has more than maximum permitted argument count
Makefile:96: recipe for target 'net/trace.h-timestamp' failed
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170426153900.21066-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 0ab8ed18a6 ("trace: switch to
modular code generation for sub-directories") forgot to convert "tcg"
trace events to the modular code generation approach where each
sub-directory has its own trace-events file.
This patch fixes compilation for "tcg" trace events. Currently they are
only used in the root ./trace-events file.
"tcg" trace events can only be used in the root ./trace-events file for
the time being.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170327131718.18268-1-stefanha@redhat.com
Suggested-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce rules in the top level Makefile that are able to generate
trace.[ch] files in every subdirectory which has a trace-events file.
The top level directory is handled specially, so instead of creating
trace.h, it creates trace-root.h. This allows sub-directories to
include the top level trace-root.h file, without ambiguity wrt to
the trace.g file in the current sub-dir.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170125161417.31949-7-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, the generated function body will do "strlen(arg)" but the
argument could be 'char **' or 'char * const *'. Avoid that by excluding
such cases in is_string check.
Reported by patchew's "make docker-test-mingw@fedora".
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1477453806-21097-1-git-send-email-famz@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The declarations in the generated-tracers.h file are
assuming there's only ever going to be one instance
of this header, as they are not namespaced. When we
have one header per event group, if a single source
file needs to include multiple sets of trace events,
the symbols will all clash.
This change thus introduces a '--group NAME' arg to the
'tracetool' program. This will cause all the symbols in
the generated header files to be given a unique namespace.
If no group is given, the group name 'common' is used,
which is suitable for the current usage where there is
only one global trace-events file used for code generation.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 1475588159-30598-21-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
