For nested PAPR API, we use SpaprMachineStateNestedGuest struct to store
partition table info, use the same in spapr_get_pate_nested() via
helper.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
spapr_exit_nested and spapr_get_pate_nested_hv contains code which
is specific to nested-hv API. Isolating code flows based on API
helps extending it to be used with different API as well.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Most of the nested code has already been moved to spapr_nested.c
This logic inside spapr_get_pate is related to nested guests and
better suited for spapr_nested.c, hence moving there.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Since cap-nested-hv is an optional capability, it makes sense to register
api specfic hcalls only when respective capability is enabled. This
requires to introduce a new API to unregister hypercalls to maintain
sanity across guest reboot since caps are re-applied across reboots and
re-registeration of hypercalls would hit assert otherwise.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Copy the pa-features arrays from spapr, adjusting slightly as
described in comments.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add POWER10 pa-features entry.
Notably DEXCR and [P]HASHST/[P]HASHCHK instruction support is
advertised. Each DEXCR aspect is allocated a bit in the device tree,
using the 68--71 byte range (inclusive). The functionality of the
[P]HASHST/[P]HASHCHK instructions is separately declared in byte 72,
bit 0 (BE).
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
[npiggin: reword title and changelog, adjust a few bits]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
"MMR" and "SPR SO" are not implemented in POWER9, so clear those bits.
HTM is not set by default, and only later if the cap is set, so remove
the comment that suggests otherwise.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
TCG does not support copy/paste instructions. Remove it from
ibm,pa-features. This has never been implemented under TCG or
practically usable under KVM, so it won't be missed.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
SAO is a page table attribute that strengthens the memory ordering of
accesses. QEMU with MTTCG does not implement this, so clear it in
ibm,pa-features. This is an obscure feature that has been removed from
POWER10 ISA v3.1, there isn't much concern with removing it.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
With --without-default-devices it is possible to build a binary that
does not include any USB host controller and therefore that does not
include the code guarded by CONFIG_USB. While the simpler creation
functions such as usb_create_simple can be inlined, this is not true
of usb_bus_find(). Remove it, replacing it with a search of the single
USB bus on the machine.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240223124406.234509-8-pbonzini@redhat.com>
[PMD: Fixed style]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
pseries machines before version 2.11 have undergone many changes to
correct issues, mostly regarding migration compatibility. This is
obfuscating the code uselessly and makes maintenance more difficult.
Remove them and only keep the last version of the 2.x series, 2.12,
still in use by old distros.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Initialize the machine specific max_cpus limit as per the maximum range
of CPU IPIs available. Keeping between 4096 to 8192 will throw IRQ not
free error due to XIVE/XICS limitation and keeping beyond 8192 will hit
assert in tcg_region_init or spapr_xive_claim_irq.
Logs:
Without patch fix:
[root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=4097
qemu-system-ppc64: IRQ 4096 is not free
[root@host build]#
On LPAR:
[root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=8193
**
ERROR:../tcg/region.c:774:tcg_region_init: assertion failed:
(region_size >= 2 * page_size)
Bail out! ERROR:../tcg/region.c:774:tcg_region_init: assertion failed:
(region_size >= 2 * page_size)
Aborted (core dumped)
[root@host build]#
On x86:
[root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=8193
qemu-system-ppc64: ../hw/intc/spapr_xive.c:596: spapr_xive_claim_irq:
Assertion `lisn < xive->nr_irqs' failed.
Aborted (core dumped)
[root@host build]#
With patch fix:
[root@host build]# qemu-system-ppc64 -accel tcg -smp 10,maxcpus=4097
qemu-system-ppc64: Invalid SMP CPUs 4097. The max CPUs supported by
machine 'pseries-8.2' is 4096
[root@host build]#
Reported-by: Kowshik Jois <kowsjois@linux.ibm.com>
Tested-by: Kowshik Jois <kowsjois@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Avoid directly referencing nd_table[] by first instantiating any
spapr-vlan devices using a qemu_get_nic_info() loop, then calling
pci_init_nic_devices() to do the rest.
No functional change intended.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Current code does:
- register pre_2_10_vmstate_dummy_icp with "icp/server" and instance
dependinfg on cpu number
- for newer machines, it register vmstate_icp with "icp/server" name
and instance 0
- now it unregisters "icp/server" for the 1st instance.
This is wrong at many levels:
- we shouldn't have two VMSTATEDescriptions with the same name
- In case this is the only solution that we can came with, it needs to
be:
* register pre_2_10_vmstate_dummy_icp
* unregister pre_2_10_vmstate_dummy_icp
* register real vmstate_icp
Created vmstate_replace_hack_for_ppc() with warnings left and right
that it is a hack.
CC: Cedric Le Goater <clg@kaod.org>
CC: Daniel Henrique Barboza <danielhb413@gmail.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Greg Kurz <groug@kaod.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-8-quintela@redhat.com>
Modify migrate_add_blocker and migrate_del_blocker to take an Error **
reason. This allows migration to own the Error object, so that if
an error occurs in migrate_add_blocker, migration code can free the Error
and clear the client handle, simplifying client code. It also simplifies
the migrate_del_blocker call site.
In addition, this is a pre-requisite for a proposed future patch that would
add a mode argument to migration requests to support live update, and
maintain a list of blockers for each mode. A blocker may apply to a single
mode or to multiple modes, and passing Error** will allow one Error object
to be registered for multiple modes.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1697634216-84215-1-git-send-email-steven.sistare@oracle.com>
Remove extra 'i' variable to fix this warning :
../hw/ppc/spapr.c: In function ‘spapr_init_cpus’:
../hw/ppc/spapr.c:2668:13: warning: declaration of ‘i’ shadows a previous local [-Wshadow=compatible-local]
2668 | int i;
| ^
../hw/ppc/spapr.c:2645:9: note: shadowed declaration is here
2645 | int i;
| ^
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230918145850.241074-5-clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Introduce a helper routine defining one CPU device node to fix this
warning :
../hw/ppc/spapr.c: In function ‘spapr_dt_cpus’:
../hw/ppc/spapr.c:812:19: warning: declaration of ‘cs’ shadows a previous local [-Wshadow=compatible-local]
812 | CPUState *cs = rev[i];
| ^~
../hw/ppc/spapr.c:786:15: note: shadowed declaration is here
786 | CPUState *cs;
| ^~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20230918145850.241074-4-clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
NVLink2 support was removed from the PPC PowerNV platform and VFIO in
Linux 5.13 with commits :
562d1e207d32 ("powerpc/powernv: remove the nvlink support")
b392a1989170 ("vfio/pci: remove vfio_pci_nvlink2")
This was 2.5 years ago. Do the same in QEMU with a revert of commit
ec132efaa8 ("spapr: Support NVIDIA V100 GPU with NVLink2"). Some
adjustements are required on the NUMA part.
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20230918091717.149950-1-clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
spapr_machine_reset gets a random number to populate the device-tree
rng seed with. When loading a snapshot for record-replay, the machine
is reset again, and that tries to consume the random event record
again, crashing due to inconsistent record
Fix this by saving the seed to populate the device tree with, and
skipping the rng on snapshot load.
Acked-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When the machine is reset to load a new snapshot while being debugged
with replay-record, it is done from another thread, so the CPU does
not run the register setting operations. Set CPU registers directly in
machine reset.
Cc: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
On MIPS, kvm_arch_get_default_type() returns a negative value when an
error occurred so handle the case. Also, let other machines return
negative values when errors occur and declare returning a negative
value as the correct way to propagate an error that happened when
determining KVM type.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230727073134.134102-5-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Let's use our new helper and stop always allocating ms->device_memory.
There is no difference in common memory-device code anymore between
ms->device_memory being NULL or the size being 0. So we only have to
teach spapr code that ms->device_memory isn't always around.
We can now modify two maxram_size checks to rely on ms->device_memory
for detecting whether we have memory devices.
Cc: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: "Cédric Le Goater" <clg@kaod.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Greg Kurz <groug@kaod.org>
Cc: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230623124553.400585-5-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
PPC TCG supports SMT CPU configurations for non-hypervisor state, so
permit POWER8-10 pseries machines to enable SMT.
This requires PIR and TIR be set, because that's how sibling thread
matching is done by TCG.
spapr's nested-HV capability does not currently coexist with SMT, so
that combination is prohibited (interestingly somewhat analogous to
LPAR-per-core mode on real hardware which also does not support KVM).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: Also test smp_threads when checking for POWER8 CPU and above ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Although the PPC target only supports the TCG and KVM
accelerators, QEMU supports more. We can not assume that
'!kvm == tcg', so test for the correct accelerator. This
also eases code review, because here we don't care about
KVM, we really want to test for TCG.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[np: Fix changelog typo noticed by Zoltan]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Create spapr_nested.c for most of the nested HV implementation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
POWER9 DD2.1 and earlier had significant limitations when running KVM,
including lack of "mixed mode" MMU support (ability to run HPT and RPT
mode on threads of the same core), and a translation prefetch issue
which is worked around by disabling "AIL" mode for the guest.
These processors are not widely available, and it's difficult to deal
with all these quirks in qemu +/- KVM, so create a POWER9 DD2.2 CPU
and make it the default POWER9 CPU.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20230515160201.394587-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The behaviour of the Address Translation Mode on Interrupt resource is
not consistently supported by all CPU versions or all KVM versions: KVM
HV does not support mode 2, and does not support mode 3 on POWER7 or
early POWER9 processesors. KVM PR only supports mode 0. TCG supports all
modes (0, 2, 3) on CPUs with support for the corresonding LPCR[AIL] mode.
This leads to inconsistencies in guest behaviour and could cause problems
migrating guests.
This was not noticable for Linux guests for a long time because the
kernel only uses modes 0 and 3, and it used to consider AIL-3 to be
advisory in that it would always keep the AIL-0 vectors around, so it
did not matter whether or not interrupts were delivered according to
the AIL mode. Recent Linux guests depend on AIL mode 3 working as
specified in order to support the SCV facility interrupt. If AIL-3 can
not be provided, then H_SET_MODE must return an error to Linux so it can
disable the SCV facility (failure to do so can lead to userspace being
able to crash the guest kernel).
Add the ail-mode-3 capability to specify that AIL-3 is supported. AIL-0
is implied as the baseline, and AIL-2 is no longer supported by spapr.
AIL-2 is not known to be used by any software, but support in TCG could
be restored with an ail-mode-2 capability quite easily if a regression
is reported.
Modify the H_SET_MODE Address Translation Mode on Interrupt resource
handler to check capabilities and correctly return error if not
supported.
KVM has a cap to advertise support for AIL-3.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230515160216.394612-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These way we can make them atomic and use this functions from any
place. I also moved all functions that use rate_limit to
migration-stats.
Functions got renamed, they are not qemu_file anymore.
qemu_file_rate_limit -> migration_rate_exceeded
qemu_file_set_rate_limit -> migration_rate_set
qemu_file_get_rate_limit -> migration_rate_get
qemu_file_reset_rate_limit -> migration_rate_reset
qemu_file_acct_rate_limit -> migration_rate_account.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This queue contains a MAINTAINERS update, the implementation of the Freescale eSDHC,
the introduction of the DEXCR/HDEXCR instructions and other assorted fixes (most of
them for the e500 board).
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCY6M//RYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFkaNABAKfQ/zpg2ugr/SmC7Ee9tnFNxDrq
JsNw+roXpUZvnkUZAQCMRm4BxfaXhXikRaSL2ZfGRtybKXki5o3Ez+rLxISiAg==
=gRo7
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20221221' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-12-21:
This queue contains a MAINTAINERS update, the implementation of the Freescale eSDHC,
the introduction of the DEXCR/HDEXCR instructions and other assorted fixes (most of
them for the e500 board).
# gpg: Signature made Wed 21 Dec 2022 17:18:53 GMT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20221221' of https://gitlab.com/danielhb/qemu:
target/ppc: Check DEXCR on hash{st, chk} instructions
target/ppc: Implement the DEXCR and HDEXCR
hw/ppc/e500: Move comment to more appropriate place
hw/ppc/e500: Resolve variable shadowing
hw/ppc/e500: Prefer local variable over qdev_get_machine()
hw/ppc/virtex_ml507: Prefer local over global variable
target/ppc/mmu_common: Fix table layout of "info tlb" HMP command
target/ppc/mmu_common: Log which effective address had no TLB entry found
hw/ppc/spapr: Reduce "vof.h" inclusion
hw/ppc/vof: Do not include the full "cpu.h"
target/ppc/kvm: Add missing "cpu.h" and "exec/hwaddr.h"
hw/ppc/e500: Add Freescale eSDHC to e500plat
hw/sd/sdhci: Support big endian SD host controller interfaces
MAINTAINERS: downgrade PPC KVM/TCG CPUs and pSeries to 'Odd Fixes'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently objects including "hw/ppc/spapr.h" are forced to be
target specific due to the inclusion of "vof.h" in "spapr.h".
"spapr.h" only uses a Vof pointer, so doesn't require the structure
declaration. The only place where Vof structure is accessed is in
spapr.c, so include "vof.h" there, and forward declare the structure
in "spapr.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221213123550.39302-4-philmd@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add 8.0 machine types for arm/i440fx/m68k/q35/s390x/spapr.
Reviewed-by: Cédric Le Goater <clg@kaod.org> [ppc]
Reviewed-by: Thomas Huth <thuth@redhat.com> [s390x]
Reviewed-by: Greg Kurz <groug@kaod.org> [ppc]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20221212152145.124317-2-cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/qdev.json and
qapi/qom.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Eduardo Habkost <eduardo@habkost.net>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221104160712.3005652-21-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Snapshot loading only expects to call deterministic handlers, not
non-deterministic ones. So introduce a way of registering handlers that
won't be called when reseting for snapshots.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-id: 20221025004327.568476-2-Jason@zx2c4.com
[PMM: updated json doc comment with Markus' text; fixed
checkpatch style nit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The pSeries machine never bothered with the common machine->fdt
attribute. We do all the FDT related work using spapr->fdt_blob.
We're going to introduce a QMP/HMP command to dump the FDT, which will
rely on setting machine->fdt properly to work across all machine
archs/types.
Let's set machine->fdt in two places where we manipulate the FDT:
spapr_machine_reset() and CAS. There are other places where the FDT is
manipulated in the pSeries machines, most notably the hotplug/unplug
path. For now we'll acknowledge that we won't have the most accurate
representation of the FDT, depending on the current machine state, when
using this QMP/HMP fdt command. Making the internal FDT representation
always match the actual FDT representation that the guest is using is a
problem for another day.
spapr->fdt_blob is left untouched for now. To replace it with
machine->fdt, since we're migrating spapr->fdt_blob, we would need to
migrate machine->fdt as well. This is something that we would like to to
do keep our code simpler but it's also a work we'll leave for later.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-14-danielhb413@gmail.com>
Use autofree heap allocation instead of variable-length
array on the stack.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-id: 20220819153931.3147384-7-peter.maydell@linaro.org
spapr->htab is allocated by qemu_memalign(), hence we should use
qemu_vfree() to free it.
Fixes: c5f54f3e31 ("pseries: Move hash page table allocation to reset time")
Fixes: b4db54132f ("target/ppc: Implement H_REGISTER_PROCESS_TABLE H_CALL"")
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220920103159.1865256-28-bmeng.cn@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Check if partition and process tables are properly aligned, in
their size, according to PowerISA 3.1B, Book III 6.7.6 programming
note. Hardware and KVM also raise an exception in these cases.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220628133959.15131-2-leandro.lupori@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to
initialize early. Set this using the usual guest random number
generation function. This is confirmed to successfully initialize the
RNG on Linux 5.19-rc6. The rng-seed node is part of the DT spec. Set
this on the paravirt platforms, spapr and e500, just as is done on other
architectures with paravirt hardware.
Cc: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220712135114.289855-1-Jason@zx2c4.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The new PAPR 2.12 defines a watchdog facility managed via the new
H_WATCHDOG hypercall.
This adds H_WATCHDOG support which a proposed driver for pseries uses:
https://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=303120
This was tested by running QEMU with a debug kernel and command line:
-append \
"pseries-wdt.timeout=60 pseries-wdt.nowayout=1 pseries-wdt.action=2"
and running "echo V > /dev/watchdog0" inside the VM.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220622051008.1067464-1-aik@ozlabs.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
