Test that qemu-img check reports the number of leaks and corruptions
fixed in its JSON report (after a successful run).
While touching the _unsupported_imgopts line, adjust the note on why
data_file does not work with this test: The current comment sounds a bit
like it is a mistake for qemu-img check not to check external data
files' refcounts. But there are no such refcounts, so it is no mistake.
Just say that qemu-img check does not do much for external data files,
and this is why this test does not work with them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200324172757.1173824-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Similarly to peek_file_[bl]e, we may want to write binary integers into
a file. Currently, this often means messing around with poke_file and
raw binary strings. I hope these functions make it a bit more
comfortable.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Code-suggested-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200324172757.1173824-3-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
As the feature name table can be quite large (over 9k if all 64 bits
of all three feature fields have names; a mere 8 features leaves only
8 bytes for a backing file name in a 512-byte cluster), it is unwise
to emit this optional header in images with small cluster sizes.
Update iotest 036 to skip running on small cluster sizes; meanwhile,
note that iotest 061 never passed on alternative cluster sizes
(however, I limited this patch to tests with output affected by adding
feature names, rather than auditing for other tests that are not
robust to alternative cluster sizes).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200324174233.1622067-4-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The feature table is supposed to advertise the name of all feature
bits that we support; however, we forgot to update the table for
autoclear bits. While at it, move the table to read-only memory in
code, and tweak the qcow2 spec to name the second autoclear bit.
Update iotests that are affected by the longer header length.
Fixes: 88ddffae
Fixes: 93c24936
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324174233.1622067-3-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
data_file does not work with v2, and we probably want 026 to keep
working for v2 images. Thus, open a new file for v3-exclusive error
path test cases.
Fixes: 81311255f2
(“iotests/026: Test EIO on allocation in a data-file”)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311140707.1243218-1-mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some iotests leave behind some external data file when run for qcow2
with -o data_file. Fix that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200224171631.384314-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Waiting for only 1 second proved to be too short on a loaded system,
resulting in false positives when testing pull requests. Increase the
timeout a bit to make this less likely.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200313083617.8326-4-kwolf@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this, you can send SIGABRT to a hanging test case and you'll get a
Python stack trace so you know where it was hanging.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200313083617.8326-2-kwolf@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds a new test file to exercise the case where
qemu-img fails to complete for the LUKS format when a non-UTF8
secret is used.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200130213907.2830642-5-danielhb413@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds test cases for attaching the backing chain to a mirror
job target right before finalising the job, where the image is in a
non-mainloop AioContext (i.e. the backing chain needs to be moved to the
AioContext of the mirror target).
This requires switching the test case from virtio-blk to virtio-scsi
because virtio-blk only actually starts using the iothreads when the
guest driver initialises the device (which never happens in a test case
without a guest OS). virtio-scsi always keeps its block nodes in the
AioContext of the the requested iothread without guest interaction.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-7-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The newly tested scenario is a common live storage migration scenario:
The target node is opened without a backing file so that the active
layer is mirrored while its backing chain can be copied in the
background.
The backing chain should be attached to the mirror target node when
finalising the job, just before switching the users of the source node
to the new copy (at which point the mirror job still has a reference to
the node). drive-mirror did this automatically, but with blockdev-mirror
this is the job of the QMP client.
This patch adds test cases for two ways to achieve the desired result,
using either x-blockdev-reopen or blockdev-snapshot.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-5-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'job-complete' QMP command should be run with qmp() rather than
qmp_log() if use_log=False is passed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-4-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev-snapshot returned an error if the overlay was already in use,
which it defined as having any BlockBackend parent. This is in fact both
too strict (some parents can tolerate the change of visible data caused
by attaching a backing file) and too loose (some non-BlockBackend
parents may not be happy with it).
One important use case that is prevented by the too strict check is live
storage migration with blockdev-mirror. Here, the target node is
usually opened without a backing file so that the active layer is
mirrored while its backing chain can be copied in the background.
The backing chain should be attached to the mirror target node when
finalising the job, just before switching the users of the source node
to the new copy (at which point the mirror job still has a reference to
the node). drive-mirror did this automatically, but with blockdev-mirror
this is the job of the QMP client, so it needs a way to do this.
blockdev-snapshot is the obvious way, so this patch makes it work in
this scenario. The new condition is that no parent uses CONSISTENT_READ
permissions. This will ensure that the operation will still be blocked
when the node is attached to the guest device, so blockdev-snapshot
remains safe.
(For the sake of completeness, x-blockdev-reopen can be used to achieve
the same, however it is a big hammer, performs the graph change
completely unchecked and is still experimental. So even with the option
of using x-blockdev-reopen, there are reasons why blockdev-snapshot
should be able to perform this operation.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-3-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tests 261 and 272 fail on RHEL 7 with coreutils 8.22, since od
--endian was not added until coreutils 8.23. Fix this by manually
constructing the final value one byte at a time.
Fixes: fc8ba423
Reported-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200226125424.481840-1-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test exercises the block/crypto.c "luks" block driver
.bdrv_measure() code.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200221112522.1497712-5-stefanha@redhat.com>
[mreitz: Renamed test from 282 to 288]
Signed-off-by: Max Reitz <mreitz@redhat.com>
In most qemu-img sub-commands the --object option only makes sense when
there is a filename. qemu-img measure is an exception because objects
may be referenced from the image creation options instead of an existing
image file. Allow --object without a filename.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200221112522.1497712-4-stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch allows bdrv_reopen() (and therefore the x-blockdev-reopen QMP
command) to attach a node as the new backing file even if the node is in
a different AioContext than the parent if one of both nodes can be moved
to the AioContext of the other node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20200306141413.30705-3-kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We'll want to test more than one successful case in the future, so
prepare the test for that by a refactoring that runs each scenario in a
separate VM.
test_iothreads_switch_{backing,overlay} currently produce errors, but
these are cases that should actually work, by switching either the
backing file node or the overlay node to the AioContext of the other
node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20200306141413.30705-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test what happens when writing data to an external data file, where the
write requires an L2 entry to be allocated, but the data write fails.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200225143130.111267-4-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test what happens when writing data to a preallocated zero cluster, but
the data write fails.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200225143130.111267-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
At least on ZFS this was failing as 512 was less than or equal to 512.
I suspect the reason is additional compression done by ZFS and however
qemu-img gets the actual size.
Loosen the criteria to make sure after is not bigger than before and
also dump the values in the report.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200225124710.14152-9-alex.bennee@linaro.org>
Add a test that all fields in "qemu-img snapshot -l"s output are
separated by spaces.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200117105859.241818-3-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Renamed test from 284 to 286]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This must not crash.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200121155915.98232-3-mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-6-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
[mreitz: Added a note that NBD does not support resizing, which is why
the second case is expected to fail]
Signed-off-by: Max Reitz <mreitz@redhat.com>
First, driver=qcow2 will not work so well with non-qcow2 formats (and
this test claims to support qcow, qed, and vmdk).
Second, vmdk will always report the backing file format to be vmdk.
Filter that out so the output looks like for all other formats.
Third, the flat vmdk subformats do not support backing files, so they
will not work with this test.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20191219144243.1763246-1-mreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When initializing the LUKS header the size with default encryption
parameters will currently be 2068480 bytes. This is rounded up to
a multiple of the cluster size, 2081792, with 64k sectors. If the
end of the header is not the same as the end of the cluster we fill
the extra space with zeros. This was forgetting that not even the
space allocated for the header will be fully initialized, as we
only write key material for the first key slot. The space left
for the other 7 slots is never written to.
An optimization to the ref count checking code:
commit a5fff8d4b4 (refs/bisect/bad)
Author: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Date: Wed Feb 27 16:14:30 2019 +0300
qcow2-refcount: avoid eating RAM
made the assumption that every cluster which was allocated would
have at least some data written to it. This was violated by way
the LUKS header is only partially written, with much space simply
reserved for future use.
Depending on the cluster size this problem was masked by the
logic which wrote zeros between the end of the LUKS header and
the end of the cluster.
$ qemu-img create --object secret,id=cluster_encrypt0,data=123456 \
-f qcow2 -o cluster_size=2k,encrypt.iter-time=1,\
encrypt.format=luks,encrypt.key-secret=cluster_encrypt0 \
cluster_size_check.qcow2 100M
Formatting 'cluster_size_check.qcow2', fmt=qcow2 size=104857600
encrypt.format=luks encrypt.key-secret=cluster_encrypt0
encrypt.iter-time=1 cluster_size=2048 lazy_refcounts=off refcount_bits=16
$ qemu-img check --object secret,id=cluster_encrypt0,data=redhat \
'json:{"driver": "qcow2", "encrypt.format": "luks", \
"encrypt.key-secret": "cluster_encrypt0", \
"file.driver": "file", "file.filename": "cluster_size_check.qcow2"}'
ERROR: counting reference for region exceeding the end of the file by one cluster or more: offset 0x2000 size 0x1f9000
Leaked cluster 4 refcount=1 reference=0
...snip...
Leaked cluster 130 refcount=1 reference=0
1 errors were found on the image.
Data may be corrupted, or further writes to the image may corrupt it.
127 leaked clusters were found on the image.
This means waste of disk space, but no harm to data.
Image end offset: 268288
The problem only exists when the disk image is entirely empty. Writing
data to the disk image payload will solve the problem by causing the
end of the file to be extended further.
The change fixes it by ensuring that the entire allocated LUKS header
region is fully initialized with zeros. The qemu-img check will still
fail for any pre-existing disk images created prior to this change,
unless at least 1 byte of the payload is written to.
Fully writing zeros to the entire LUKS header is a good idea regardless
as it ensures that space has been allocated on the host filesystem (or
whatever block storage backend is used).
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200207135520.2669430-1-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
8dff69b94 added an aio parameter to the drive parameter but forgot to
add a comma before, thus breaking the test. Fix it again.
Fixes: 8dff69b941
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200206130812.612960-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit d9df28e7b0 ("iotests: check whitelisted formats") added the
modern @iotests.skip_if_unsupported() to the functions in this test,
so we don't need the old explicit test here anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200129141751.32652-1-thuth@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Tested-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-20-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add two tests to see that you cannot replace a Quorum child with the
mirror job while the child is in use by a different parent.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-19-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
041's TestRepairQuorum has its own image_len, no need to refer to
TestSingleDrive. (This patch allows commenting out TestSingleDrive to
speed up 041 during test testing.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-18-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-17-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All tearDowns in 041 shutdown the VM. Thus, test cases do not need to
do it themselves (unless they need the VM to be down for some
post-operation check).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-16-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This way, we get to see errors during the completion phase.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-14-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using -drive with default options means that a virtio-blk drive will be
created that has write access to the to-be quorum children. Quorum
should have exclusive write access to them, so we should use -blockdev
instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-5-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests both read failure (from the top node) and write failure (to
the base node) for on-error=report/stop/ignore.
As block-commit actually starts two different types of block jobs
(mirror.c for committing the active later, commit.c for intermediate
layers), all tests are run for both cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-8-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a test for 'qemu-img convert' with copy offloading where the
target image has an external data file. If the test hosts supports it,
it tests both the case where copy offloading is supported and the case
where it isn't (otherwise we just test unsupported twice).
More specifically, the case with unsupported copy offloading tests
qcow2_alloc_cluster_abort() with external data files.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200211094900.17315-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is only needed for Python 2, which we do not support anymore.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200204160604.19883-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Scripts that have a Python shebang are meant to be executed directly from the
shell; give them 755 permissions.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200204160237.16889-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
All the iotests Python scripts have been converted to search for
the Python 3 interpreter. Update the ./check script accordingly.
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-13-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -lF '#!/usr/bin/env python' \
| xargs grep -L 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-11-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -l 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-4-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
As we want to enforce a unique and explicit Python 3 interpreter,
we need let this script handle 'python3' too.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-3-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
According to Kevin, tests 030, 040 and 041 are among the most valuable
tests that we have, so we should always run them if possible, even if
they take a little bit longer.
According to Max, it would be good to have a test for iothreads and
migration. 127 and 256 seem to be good candidates for iothreads. For
migration, let's enable 181 and 203 (which also tests iothreads).
(091 would be a good candidate for migration, too, but Alex Bennée
reported that this test fails on ZFS file systems, so it can't be
included yet)
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-7-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to enable some of the python-based tests in the "auto" group,
and these tests require virtio-blk to work properly. Running iotests
without virtio-blk likely does not make too much sense anyway, so instead
of adding a check for the availability of virtio-blk to each and every
test (which does not sound very appealing), let's rather add a check for
this a central spot in the "check" script instead (so that it is still
possible to run "make check" for qemu-system-tricore for example).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20200121095205.26323-6-thuth@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
