This SoC uses a Cortex-M4F. QEMU only implements a M4,
which is good enough. Add a TODO note in case the M4F
is added.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Some SRAM appears to be used by the Secure Boot unit and
crypto accelerators. Name it 'secure sram'.
Note, the SRAM base address was already present but unused
(the 'SBC' index is used for the MMIO peripheral).
Interestingly using CFLAGS=-Winitializer-overrides reports:
../hw/arm/aspeed_ast10x0.c:32:30: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides]
[ASPEED_DEV_SBC] = 0x7E6F2000,
^~~~~~~~~~
../hw/arm/aspeed_ast10x0.c:24:30: note: previous initialization is here
[ASPEED_DEV_SBC] = 0x79000000,
^~~~~~~~~~
This fixes with Zephyr:
uart:~$ rsa test
rsa test vector[0]:
[00:00:26.156,000] <err> os: ***** BUS FAULT *****
[00:00:26.157,000] <err> os: Precise data bus error
[00:00:26.157,000] <err> os: BFAR Address: 0x79000000
[00:00:26.158,000] <err> os: r0/a1: 0x79000000 r1/a2: 0x00000000 r2/a3: 0x00001800
[00:00:26.158,000] <err> os: r3/a4: 0x79001800 r12/ip: 0x00000800 r14/lr: 0x0001098d
[00:00:26.158,000] <err> os: xpsr: 0x81000000
[00:00:26.158,000] <err> os: Faulting instruction address (r15/pc): 0x0001e1bc
[00:00:26.158,000] <err> os: >>> ZEPHYR FATAL ERROR 0: CPU exception on CPU 0
[00:00:26.158,000] <err> os: Current thread: 0x38248 (shell_uart)
[00:00:26.165,000] <err> os: Halting system
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
[ clg: Fixed size of Secure Boot Controller Memory ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Since I don't have access to the datasheet, the relevant
values were found in:
https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/dts/arm/aspeed/ast10x0.dtsi
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add more Aspeed watchdog registers from [*].
Since guests can righteously access them, log the access at
'unimplemented' level instead of 'guest-errors'.
[*] https://github.com/AspeedTech-BMC/zephyr/blob/v00.01.08/drivers/watchdog/wdt_aspeed.c#L31
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Avoid confusing two different things:
- the WDT I/O region size ('iosize')
- at which offset the SoC map the WDT ('offset')
While it is often the same, we can map smaller region sizes
at larger offsets.
Here we are interested in the I/O region size, so rename as
'iosize'.
Reviewed-by: Peter Delevoryas <peter@pjd.dev>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[ clg: Introduced temporary wdt_offset variable ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
EEPROM's are a form of non-volatile memory. After power-cycling an EEPROM,
I would expect the I2C state machine to be reset to default values, but I
wouldn't really expect the memory to change at all.
The current implementation of the at24c EEPROM resets its internal memory on
reset. This matches the specification in docs/devel/reset.rst:
Cold reset is supported by every resettable object. In QEMU, it means we reset
to the initial state corresponding to the start of QEMU; this might differ
from what is a real hardware cold reset. It differs from other resets (like
warm or bus resets) which may keep certain parts untouched.
But differs from my intuition. For example, if someone writes some information
to an EEPROM, then AC power cycles their board, they would expect the EEPROM to
retain that information. It's very useful to be able to test things like this
in QEMU as well, to verify software instrumentation like determining the cause
of a reboot.
Fixes: 5d8424dbd3 ("nvram: add AT24Cx i2c eeprom")
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20230128060543.95582-6-peter@pjd.dev
Signed-off-by: Cédric Le Goater <clg@kaod.org>
- Create aspeed_eeprom.c and aspeed_eeprom.h
- Include aspeed_eeprom.c in CONFIG_ASPEED meson source files
- Include aspeed_eeprom.h in aspeed.c
- Add fby35_bmc_fruid data
- Use new at24c_eeprom_init_rom helper to initialize BMC FRUID EEPROM with data
from aspeed_eeprom.c
wget https://github.com/facebook/openbmc/releases/download/openbmc-e2294ff5d31d/fby35.mtd
qemu-system-aarch64 -machine fby35-bmc -nographic -mtdblock fby35.mtd
...
user: root
pass: 0penBmc
...
root@bmc-oob:~# fruid-util bb
FRU Information : Baseboard
--------------- : ------------------
Chassis Type : Rack Mount Chassis
Chassis Part Number : N/A
Chassis Serial Number : N/A
Board Mfg Date : Fri Jan 7 10:30:00 2022
Board Mfg : XXXXXX
Board Product : Management Board wBMC
Board Serial : XXXXXXXXXXXXX
Board Part Number : XXXXXXXXXXXXXX
Board FRU ID : 1.0
Board Custom Data 1 : XXXXXXXXX
Board Custom Data 2 : XXXXXXXXXXXXXXXXXX
Product Manufacturer : XXXXXX
Product Name : Yosemite V3.5 EVT2
Product Part Number : XXXXXXXXXXXXXX
Product Version : EVT2
Product Serial : XXXXXXXXXXXXX
Product Asset Tag : XXXXXXX
Product FRU ID : 1.0
Product Custom Data 1 : XXXXXXXXX
Product Custom Data 2 : N/A
root@bmc-oob:~# fruid-util bmc
FRU Information : BMC
--------------- : ------------------
Board Mfg Date : Mon Jan 10 21:42:00 2022
Board Mfg : XXXXXX
Board Product : BMC Storage Module
Board Serial : XXXXXXXXXXXXX
Board Part Number : XXXXXXXXXXXXXX
Board FRU ID : 1.0
Board Custom Data 1 : XXXXXXXXX
Board Custom Data 2 : XXXXXXXXXXXXXXXXXX
Product Manufacturer : XXXXXX
Product Name : Yosemite V3.5 EVT2
Product Part Number : XXXXXXXXXXXXXX
Product Version : EVT2
Product Serial : XXXXXXXXXXXXX
Product Asset Tag : XXXXXXX
Product FRU ID : 1.0
Product Custom Data 1 : XXXXXXXXX
Product Custom Data 2 : Config A
root@bmc-oob:~# fruid-util nic
FRU Information : NIC
--------------- : ------------------
Board Mfg Date : Tue Nov 2 08:51:00 2021
Board Mfg : XXXXXXXX
Board Product : Mellanox ConnectX-6 DX OCP3.0
Board Serial : XXXXXXXXXXXXXXXXXXXXXXXX
Board Part Number : XXXXXXXXXXXXXXXXXXXXX
Board FRU ID : FRU Ver 0.02
Product Manufacturer : XXXXXXXX
Product Name : Mellanox ConnectX-6 DX OCP3.0
Product Part Number : XXXXXXXXXXXXXXXXXXXXX
Product Version : A9
Product Serial : XXXXXXXXXXXXXXXXXXXXXXXX
Product Custom Data 3 : ConnectX-6 DX
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20230128060543.95582-5-peter@pjd.dev
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Allows users to specify binary data to initialize an EEPROM, allowing users to
emulate data programmed at manufacturing time.
- Added init_rom and init_rom_size attributes to TYPE_AT24C_EE
- Added at24c_eeprom_init_rom helper function to initialize attributes
- If -drive property is provided, it overrides init_rom data
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Ninad Palsule <ninadpalsule@us.ibm.com>
Link: https://lore.kernel.org/r/20230128060543.95582-4-peter@pjd.dev
Signed-off-by: Cédric Le Goater <clg@kaod.org>
aspeed_eeprom_init is an exact copy of at24c_eeprom_init, not needed.
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20230128060543.95582-3-peter@pjd.dev
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This helper is useful in board initialization because lets users initialize and
realize an EEPROM on an I2C bus with a single function call.
Signed-off-by: Peter Delevoryas <peter@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20230128060543.95582-2-peter@pjd.dev
Signed-off-by: Cédric Le Goater <clg@kaod.org>
These globals were moved to MachineClass by commit 71ae9e94d9 ("pc: Move
option_rom_has_mr/rom_file_has_mr globals to MachineClass"). Finish cleanup.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use buildroot 2022.11 based images plus some customization :
- Linux version is bumped to 6.0.9 and kernel is built with a custom
config similar to what OpenBMC provides.
- U-Boot is switched to the one provided by OpenBMC for better support.
- defconfigs includes more target tools for dev.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20230119123449.531826-7-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Generated from hardware using the following command and then padding
with 0xff to fill out a power-of-2:
xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
Cc: Michael Walle <michael@walle.cc>
Cc: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20221221122213.1458540-1-linux@roeck-us.net>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Update the test_arm_ast2600_debian test to
- the latest Debian kernel
- use the Rainier machine instead of Tacoma
Both of which contains support for more hardware and thus exercises more
of the hardware Qemu models.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220607011938.1676459-1-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
With the `size += 4` before the call to `crc32`, the CRC calculation
would overrun the buffer. Size is used in the while loop starting on
line 1009 to determine how much data to write back, with the last
four bytes coming from `crc_ptr`, so do need to increase it, but should
do this after the computation.
I'm unsure why this use of uninitialized memory in the CRC doesn't
result in CRC errors, but it seems clear to me that it should not be
included in the calculation.
Signed-off-by: Stephen Longfield <slongfield@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20221220221437.3303721-1-slongfield@google.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
supermicrox11-bmc is configured with ast2400-a1 SoC. This does not match
the Supermicro documentation for X11 BMCs, and it does not match the
devicetree file in the Linux kernel.
As it turns out, some Supermicro X11 motherboards use AST2400 SoCs,
while others use AST2500.
Introduce new machine type supermicrox11-spi-bmc with AST2500 SoC
to match the devicetree description in the Linux kernel. Hardware
configuration details for this machine type are guesswork and taken
from defaults as well as from the Linux kernel devicetree file.
The new machine type was tested with aspeed-bmc-supermicro-x11spi.dts
from the Linux kernel and with Linux versions 6.0.3 and 6.1-rc2.
Linux booted successfully from initrd and from both SPI interfaces.
Ethernet interfaces were confirmed to be operational.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20221025165109.1226001-1-linux@roeck-us.net
[ clg: Renamed machine to 'supermicro-x11spi-bmc' ]
Message-Id: <20221025165109.1226001-1-linux@roeck-us.net>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The M2S-FG484 SOM uses a 16 MiB SPI flash (Spansion
S25FL128SDPBHICO). Since the test asset is bigger,
truncate it to the correct size to avoid when running
the test_arm_emcraft_sf2 test:
qemu-system-arm: device requires 16777216 bytes, block backend provides 67108864 bytes
Add comment regarding the M2S-FG484 SOM hardware in
hw/arm/msf2-som.c.
Reported-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no need to declare an intermediate "MachineState *ms".
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230206085007.3618715-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Character must be returned via ret[0] field (copied to a0 by KVM).
Return value should be set to 0 to indicate successful processing.
Signed-off-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230203135155.12449-1-vladimir.isaev@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to spec, ctzw should work with 32-bit register, not 64.
For example, previous implementation returns 33 for (1<<33) input
when the new one returns 32.
Signed-off-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230204082312.43557-1-vladimir.isaev@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
commit fb3f3730e4 added mechanism to generate virtual instruction
exception during instruction decode when virt is enabled.
However in some situations, illegal instruction exception can be raised
due to state of CPU. One such situation is implementing branch tracking.
[1] An indirect branch if doesn't land on a landing pad instruction, then
cpu must raise an illegal instruction exception.
Implementation would raise such expcetion due to missing landing pad inst
and not due to decode. Thus DisasContext must have `virt_inst_excp`
initialized to false during DisasContxt initialization for TB.
[1] - https://github.com/riscv/riscv-cfi
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230127191758.755844-1-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The XThead* extensions are maintained by T-Head and VRULL.
Adding a point of contact from both companies.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-15-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadFmv ISA extension.
The patch uses the T-Head specific decoder and translation.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-14-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds the T-Head C906 to the list of known CPUs.
Selecting this CPUs will automatically enable the available
ISA extensions of the CPUs (incl. vendor extensions).
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-13-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There are no differences for floating point instructions in priv version 1.11
and 1.12. There is also no dependency for Zfh to priv version 1.12.
Therefore allow Zfh to be enabled for priv version 1.11.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-12-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the T-Head FMemIdx instructions.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-11-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the T-Head MemIdx instructions.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-10-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the T-Head MemPair instructions.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-9-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the T-Head MAC instructions.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-8-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadCondMov ISA extension.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-7-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadBs ISA extension.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-6-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadBb ISA extension.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-5-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadBa ISA extension.
The patch uses the T-Head specific decoder and translation.
Co-developed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-4-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadSync ISA extension.
The patch uses the T-Head specific decoder and translation.
The implementation introduces a helper to execute synchronization tasks:
helper_tlb_flush_all() performs a synchronized TLB flush on all CPUs.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230131202013.2541053-3-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds support for the XTheadCmo ISA extension.
To avoid interfering with standard extensions, decoder and translation
are in its own xthead* specific files.
Future patches should be able to easily add additional T-Head extension.
The implementation does not have much functionality (besides accepting
the instructions and not qualifying them as illegal instructions if
the hart executes in the required privilege level for the instruction),
as QEMU does not model CPU caches and instructions are documented
to not raise any exceptions.
Co-developed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230131202013.2541053-2-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As it is now, riscv_compute_fdt_addr() is receiving a dram_base, a
mem_size (which is defaulted to MachineState::ram_size in all boards)
and the FDT pointer. And it makes a very important assumption: the DRAM
interval dram_base + mem_size is contiguous. This is indeed the case for
most boards that use a FDT.
The Icicle Kit board works with 2 distinct RAM banks that are separated
by a gap. We have a lower bank with 1GiB size, a gap follows, then at
64GiB the high memory starts. MachineClass::default_ram_size for this
board is set to 1.5Gb, and machine_init() is enforcing it as minimal RAM
size, meaning that there we'll always have at least 512 MiB in the Hi
RAM area.
Using riscv_compute_fdt_addr() in this board is weird because not only
the board has sparse RAM, and it's calling it using the base address of
the Lo RAM area, but it's also using a mem_size that we have guarantees
that it will go up to the Hi RAM. All the function assumptions doesn't
work for this board.
In fact, what makes the function works at all in this case is a
coincidence. Commit 1a475d39ef introduced a 3GB boundary for the FDT,
down from 4Gb, that is enforced if dram_base is lower than 3072 MiB. For
the Icicle Kit board, memmap[MICROCHIP_PFSOC_DRAM_LO].base is 0x80000000
(2 Gb) and it has a 1Gb size, so it will fall in the conditions to put
the FDT under a 3Gb address, which happens to be exactly at the end of
DRAM_LO. If the base address of the Lo area started later than 3Gb this
function would be unusable by the board. Changing any assumptions inside
riscv_compute_fdt_addr() can also break it by accident as well.
Let's change riscv_compute_fdt_addr() semantics to be appropriate to the
Icicle Kit board and for future boards that might have sparse RAM
topologies to worry about:
- relieve the condition that the dram_base + mem_size area is contiguous,
since this is already not the case today;
- receive an extra 'dram_size' size attribute that refers to a contiguous
RAM block that the board wants the FDT to reside on.
Together with 'mem_size' and 'fdt', which are now now being consumed by a
MachineState pointer, we're able to make clear assumptions based on the
DRAM block and total mem_size available to ensure that the FDT will be put
in a valid RAM address.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230201171212.1219375-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A common trend in other archs is to calculate the fdt address, which is
usually straightforward, and then calling a function that loads the
fdt/dtb by using that address.
riscv_load_fdt() is doing a bit too much in comparison. It's calculating
the fdt address via an elaborated heuristic to put the FDT at the bottom
of DRAM, and "bottom of DRAM" will vary across boards and
configurations, then it's actually loading the fdt, and finally it's
returning the fdt address used to the caller.
Reduce the existing complexity of riscv_load_fdt() by splitting its code
into a new function, riscv_compute_fdt_addr(), that will take care of
all fdt address logic. riscv_load_fdt() can then be a simple function
that just loads a fdt at the given fdt address.
We're also taken the opportunity to clarify the intentions and
assumptions made by these functions. riscv_load_fdt() is now receiving a
hwaddr as fdt_addr because there is no restriction of having to load the
fdt in higher addresses that doesn't fit in an uint32_t.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230201171212.1219375-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
fdt_pack() can change the fdt size, meaning that fdt_totalsize() can
contain a now deprecated (bigger) value.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230201171212.1219375-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
According to privileged spec, if [sm]tval is written with a nonzero
value when a breakpoint exception occurs, then [sm]tval will contain
the faulting virtual address. Set tval to hit address when breakpoint
exception is triggered by hardware watchpoint.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230131170955.752743-1-geomatsi@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Follow the QEMU convention of naming MachineState pointers as 'ms' by
renaming the instances where we're calling it 'mc'.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230124212234.412630-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We have a convention in other QEMU boards/archs to name MachineState
pointers as either 'machine' or 'ms'. MachineClass pointers are usually
called 'mc'.
The 'virt' RISC-V machine has a lot of instances where MachineState
pointers are named 'mc'. There is nothing wrong with that, but we gain
more compatibility with the rest of the QEMU code base, and easier
reviews, if we follow QEMU conventions.
Rename all 'mc' MachineState pointers to 'ms'. This is a very tedious
and mechanical patch that was produced by doing the following:
- find/replace all 'MachineState *mc' to 'MachineState *ms';
- find/replace all 'mc->fdt' to 'ms->fdt';
- find/replace all 'mc->smp.cpus' to 'ms->smp.cpus';
- replace any remaining occurrences of 'mc' that the compiler complained
about.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230124212234.412630-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_socket_count() returns either ms->numa_state->num_nodes or 1
depending on NUMA support. In any case the value can be retrieved only
once and used in the rest of the function.
This will also alleviate the rename we're going to do next by reducing
the instances of MachineState 'mc' inside hw/riscv/virt.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230124212234.412630-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should call decode_save_opc() for all relevant instructions which
can potentially generate a virtual instruction fault or a guest page
fault because generating transformed instruction upon guest page fault
expects opcode to be available. Without this, hypervisor will see
transformed instruction as zero in htinst CSR for guest MMIO emulation
which makes MMIO emulation in hypervisor slow and also breaks nested
virtualization.
Fixes: a9814e3e08 ("target/riscv: Minimize the calls to decode_save_opc")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230120125950.2246378-5-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The time CSR will wrap-around immediately after reaching UINT64_MAX
so we don't need to re-start QEMU timer when timecmp == UINT64_MAX
in riscv_timer_write_timecmp().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230120125950.2246378-4-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>