Commit Graph

423 Commits

Author SHA1 Message Date
Markus Armbruster
a0b1a66ea3 Include monitor/monitor.h exactly where needed
In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:41 +02:00
Markus Armbruster
cc7a8ea740 Include qapi/qmp/qerror.h exactly where needed
In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:41 +02:00
Markus Armbruster
d49b683644 qerror: Move #include out of qerror.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster
c6bd8c706a qerror: Clean up QERR_ macros to expand into a single string
These macros expand into error class enumeration constant, comma,
string.  Unclean.  Has been that way since commit 13f59ae.

The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.

Clean up as follows:

* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
  delete it from the QERR_ macro.  No change after preprocessing.

* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
  error_setg(...).  Again, no change after preprocessing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Dr. David Alan Gilbert
1a8f46f8d6 Move loadvm_handlers into MigrationIncomingState
In postcopy we need the loadvm_handlers to be used in a couple
of different instances of the loadvm loop/routine, and thus
it can't be local any more.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12 06:54:01 +02:00
Dr. David Alan Gilbert
bca7856ae8 Create MigrationIncomingState
There are currently lots of pieces of incoming migration state scattered
around, and postcopy is adding more, and it seems better to try and keep
it together.

allocate MIS in process_incoming_migration_co

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12 06:54:01 +02:00
Dr. David Alan Gilbert
f796baa1b3 Split header writing out of qemu_savevm_state_begin
Split qemu_savevm_state_begin to:
  qemu_savevm_state_header   That writes the initial file header.
  qemu_savevm_state_begin    That sets up devices and does the first
                             device pass.

Used later in postcopy.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12 06:54:01 +02:00
Juan Quintela
e45a1ebfc6 migration: Remove duplicated assignment of SETUP status
We assign the MIGRATION_STATUS_SETUP status in two places.  Just in
succession.  Just remove the second one.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-12 06:42:34 +02:00
Liang Li
85de83231e migration: Add qmp commands to set and query parameters
Add the qmp commands to tune and query the parameters used in live
migration.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-05-07 18:31:53 +02:00
Liang Li
43c60a81ba migration: Use an array instead of 3 parameters
Put the three parameters related to multiple thread (de)compression
into an int array, and use an enum type to index the parameter.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-05-07 18:31:53 +02:00
Liang Li
dde4e694ae migration: Add interface to control compression
The multiple compression threads can be turned on/off through
qmp and hmp interface before doing live migration.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-05-07 18:31:53 +02:00
Liang Li
3fcb38c223 migration: Add the framework of multi-thread decompression
Add the code to create and destroy the multiple threads those will be
used to do data decompression. Left some functions empty just to keep
clearness, and the code will be added later.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-05-06 17:36:57 +02:00
Liang Li
8706d2d566 migration: Add the framework of multi-thread compression
Add the code to create and destroy the multiple threads those will
be used to do data compression. Left some functions empty to keep
clearness, and the code will be added later.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-05-06 17:36:57 +02:00
zhanghailiang
cde63fbed8 migration: Expose 'cancelling' status to user
'cancelling' status was introduced by commit 51cf4c1a, mainly to avoid a
possible start of a new migration process while the previous one still exists.
But we didn't expose this status to user, instead we returned the 'active' state.

Here, we expose it to the user (such as libvirt), 'cancelling' status only
occurs for a short window before the migration aborts, so for users,
if they cancel a migration process, it will observe 'cancelling' status
occasionally.

Testing revealed that with older libvirt (anything 1.2.13 or less) will
print an odd error message if the state is seen, but that the migration
is still properly cancelled. Newer libvirt will be patched to recognize
the new state without the odd error message.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Cc: libvir-list@redhat.com
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-17 15:20:37 +01:00
zhanghailiang
24b8c39b5c migration: Convert 'status' of MigrationInfo to use an enum type
The original 'status' is an open-coded 'str' type, convert it to use an
enum type.
This conversion is backwards compatible, better documented and
more convenient for future extensibility.

In addition, Fix a typo for qapi-schema.json (just remove the typo) :
s/'completed'. 'comppleted' (since 1.2)/'completed' (since 1.2)

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-17 15:20:37 +01:00
zhanghailiang
3119473166 migration: Rename abbreviated macro MIG_STATE_* to MIGRATION_STATUS_*
Rename all macro MIG_STATE_* to  MIGRATION_STATUS_* except "MIG_STATE_ERROR",
we rename it to "MIGRATION_STATUS_FAILED" which will match the migration status
string 'failed'.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-17 15:20:37 +01:00
Thomas Huth
21cb4924f7 migration: Remove unused functions
migrate_rdma_pin_all() and qsb_clone() are completely unused and thus
can be deleted.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-17 15:20:37 +01:00
Dr. David Alan Gilbert
4debb5f553 migrate_incoming: Cleanup/clarify error messages
Create a separate error for the case where migrate_incoming is
used after a succesful migrate_incoming.

Reword the error in the case where '-incoming defer' is missing
to omit the command name so it's right for both hmp and qmp.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-17 15:20:37 +01:00
Markus Armbruster
97baf9d9f7 migration: Avoid qerror_report_err() outside QMP command handlers
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP.  It should not be used
elsewhere.  Replace by error_report_err() in
process_incoming_migration_co().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-17 15:20:37 +01:00
Dr. David Alan Gilbert
bf1ae1f4dc Add migrate_incoming
Add migrate_incoming/migrate-incoming to start an incoming
migration.

Once a qemu has been started with
    -incoming defer

the migration can be started by issuing:
    migrate_incoming uri

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-16 14:31:07 +01:00
Dr. David Alan Gilbert
adde220a93 Add -incoming defer
-incoming defer causes qemu to wait for an incoming migration
to be specified later.  The monitor can be used to set migration
capabilities that may affect the incoming connection process.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-16 14:29:44 +01:00
Dr. David Alan Gilbert
a26ba26e21 migration_cancel: shutdown migration socket
Force shutdown on migration socket on cancel to cause the cancel
to complete even if the socket is blocked on a dead network.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2015-01-16 13:06:17 +05:30
Dr. David Alan Gilbert
60fe637bf0 Start migrating migration code into a migration directory
The migration code now occupies a fair chunk of the top level .c
files, it seems time to give it it's own directory.

I've not touched:
   arch_init.c - that's mostly RAM migration but has a few random other
                 bits
   savevm.c    - because it's built target specific

This is purely a code move; no code has changed.
   - it fails checkpatch because of old violations, it feels safer
     to keep this as purely a move and fix those at some mythical future
     date.

The xbzrle and vmstate tests are now only run for softmmu builds
since they require files in the migrate/ directory which is only built
for softmmu.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2014-12-16 17:47:36 +05:30