Commit Graph

34904 Commits

Author SHA1 Message Date
Peter Maydell
43fe62757b Merge remote-tracking branch 'remotes/riku/linux-user-for-upstream' into staging
* remotes/riku/linux-user-for-upstream: (22 commits)
  linux-user: check return value of malloc()
  linux-user: writev Partial Writes
  linux-user: Support target-to-host translation of mlockall argument
  linux-user: clock_nanosleep errno Handling on PPC
  linux-user: Minimum Sig Handler Stack Size for PPC64 ELF V2
  linux-user: Move get_ppc64_abi
  linux-user: Detect fault in sched_rr_get_interval
  linux-user: Handle NULL sched_param argument to sched_*
  linux-user: Detect Negative Message Sizes in msgsnd System Call
  linux-user: Conditionally Pass Attribute Pointer to mq_open()
  linux-user: Make ipc syscall's third argument an abi_long
  linux-user: Properly Handle semun Structure In Cross-Endian Situations
  linux-user: Dereference Pointer Argument to ipc/semctl Sys Call
  linux-user: PPC64 semid_ds Doesnt Include _unused1 and _unused2
  linux-user: add setns and unshare
  linux-user: support ioprio_{get, set} syscalls
  linux-user: support timerfd_{create, gettime, settime} syscalls
  linux-user: fix readlink handling with magic exe symlink
  linux-user: Fix conversion of sigevent argument to timer_create
  linux-user: Fix syscall instruction usermode emulation on X86_64
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-22 14:39:53 +01:00
Max Reitz
bd39e6ed0b qemu-img: Allow cache mode specification for amend
qemu-img amend may extensively modify the target image, depending on the
options to be amended (e.g. conversion to qcow2 compat level 0.10 from
1.1 for an image with many unallocated zero clusters). Therefore it
makes sense to allow the user to specify the cache mode to be used.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-22 14:54:48 +02:00
Max Reitz
40055951a7 qemu-img: Allow source cache mode specification
Many qemu-img subcommands only read the source file(s) once. For these
use cases, a full write-back cache is unnecessary and mainly clutters
host cache memory. Though this is generally no concern as cache memory
is freely available and can be scaled by the host OS, it may become a
concern with thin provisioning.

For these cases, it makes sense to allow users to freely specify the
source cache mode (e.g. use no cache at all).

This commit adds a new switch (-T) for the qemu-img subcommands check,
compare, convert and rebase to specify the cache to be used for source
images (the backing file in case of rebase).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-22 14:54:44 +02:00
zhanghailiang
29e03fcb62 linux-user: check return value of malloc()
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:35 +03:00
Tom Musta
29560a6cb7 linux-user: writev Partial Writes
Although not technically not required by POSIX, the writev system call will
typically write out its buffers individually.  That is, if the first buffer
is written successfully, but the second buffer pointer is invalid, then
the first chuck will be written and its size is returned.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:35 +03:00
Tom Musta
6f6a40328b linux-user: Support target-to-host translation of mlockall argument
The argument to the mlockall system call is not necessarily the same on
all platforms and thus may require translation prior to passing to the
host.

For example, PowerPC 64 bit platforms define values for MCL_CURRENT
(0x2000) and MCL_FUTURE (0x4000) which are different from Intel platforms
(0x1 and 0x2, respectively)

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:35 +03:00
Tom Musta
8fbe8fdfbc linux-user: clock_nanosleep errno Handling on PPC
The clock_nanosleep syscall is unusual in that it returns positive
numbers in error handling situations, versus returning -1 and setting
errno, or returning a negative errno value.  On POWER, the kernel will
set the SO bit of CR0 to indicate failure in a syscall.  QEMU has
generic handling to do this for syscalls with standard return values.

Add special case code for clock_nanosleep to handle CR0 properly.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:35 +03:00
Tom Musta
0903c8be9e linux-user: Minimum Sig Handler Stack Size for PPC64 ELF V2
The ELF V2 ABI for PPC64 defines MINSIGSTKSZ as 4096 bytes whereas it was
2048 previously.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:35 +03:00
Tom Musta
67d6d829cd linux-user: Move get_ppc64_abi
The get_ppc64_abi is used to determine the ELF ABI (i.e. V1 or V2). This
routine is currently implemented in the linux-user/elfload.c file but
is useful in other scenarios.  Move the routine to a more generally
available location (linux-user/ppc/target_cpu.h).

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:35 +03:00
Tom Musta
d4290c40a4 linux-user: Detect fault in sched_rr_get_interval
Properly detect a fault when attempting to store into an invalid
struct timespec pointer.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:35 +03:00
Tom Musta
a1d5c5b25d linux-user: Handle NULL sched_param argument to sched_*
The sched_getparam, sched_setparam and sched_setscheduler system
calls take a pointer argument to a sched_param structure.  When
this pointer is null, errno should be set to EINVAL.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:35 +03:00
Tom Musta
edcc5f9dc3 linux-user: Detect Negative Message Sizes in msgsnd System Call
The msgsnd system call takes an argument that describes the message
size (msgsz) and is of type size_t.  The system call should set
errno to EINVAL in the event that a negative message size is passed.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:35 +03:00
Tom Musta
b6ce1f6b90 linux-user: Conditionally Pass Attribute Pointer to mq_open()
The mq_open system call takes an optional struct mq_attr pointer
argument in the fourth position.  This pointer is used when O_CREAT
is specified in the flags (second) argument.  It may be NULL, in
which case the queue is created with implementation defined attributes.

Change the code to properly handle the case when NULL is passed in the
arg4 position.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:34 +03:00
Tom Musta
37ed09560c linux-user: Make ipc syscall's third argument an abi_long
For those target ABIs that use the ipc system call (e.g. POWER),
the third argument is used in the shmat path as a pointer.  It
therefore must be declared as an abi_long (versus int) so that
the address bits are not lost in truncation.  In fact, all arguments
to do_ipc should be declared as abit_long.

In fact, it makes more sense for all of the arguments to be declaried
as abi_long (except call).

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:34 +03:00
Tom Musta
5464baecf5 linux-user: Properly Handle semun Structure In Cross-Endian Situations
The semun union used in the semctl system call contains both an int (val) and
pointers.  In cross-endian situations on 64 bit targets, the value passed to
semctl is an 8 byte (abi_long) value and thus does not have the 4-byte val
field in the correct location.  In order to rectify this, the other half
of the union must be accessed.  This is achieved in code by performing
a byte swap on the entire 8 byte union, followed by a 4-byte swap of the
first half.

Also, eliminate an extraneous (dead) line of code that sets target_su.val in
the IPC_SET/IPC_GET case.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:34 +03:00
Tom Musta
5d2fa8ebb4 linux-user: Dereference Pointer Argument to ipc/semctl Sys Call
When the ipc system call is used to wrap a semctl system call,
the ptr argument to ipc needs to be dereferenced prior to passing
it to the semctl handler.  This is because the fourth argument to
semctl is a union and not a pointer to a union.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:34 +03:00
Tom Musta
035273440b linux-user: PPC64 semid_ds Doesnt Include _unused1 and _unused2
The 64 bit PowerPC platforms eliminate the _unused1 and _unused2
elements of the semid_ds structure from <sys/sem.h>.  So eliminate
these from the target_semid_ds structure.

Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:34 +03:00
Riku Voipio
9af5c906d1 linux-user: add setns and unshare
Add support for the setns and unshare syscalls, trivially passed through to
the host. Based on patches by Paul Burton, added configure check.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:34 +03:00
Paul Burton
ab31cda327 linux-user: support ioprio_{get, set} syscalls
Add support for the ioprio_get & ioprio_set syscalls, allowing their
use by target programs.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:34 +03:00
Riku Voipio
518343413f linux-user: support timerfd_{create, gettime, settime} syscalls
Adds support for the timerfd_create, timerfd_gettime & timerfd_settime
syscalls, allowing use of timerfds by target programs.

v2: By Riku - added configure check for timerfd and ifdefs
for benefit of old distributions like RHEL5.

Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:33 +03:00
Mike Frysinger
f17f4989fa linux-user: fix readlink handling with magic exe symlink
The current code always returns the length of the path when it should
be returning the number of bytes it wrote to the output string.

Further, readlink is not supposed to append a NUL byte, but the current
snprintf logic will always do just that.

Even further, if you pass in a length of 0, you're suppoesd to get back
an error (EINVAL), but the current logic just returns 0.

Further still, if there was an error reading the symlink, we should not
go ahead and try to read the target buffer as it is garbage.

Simple test for the first two issues:
$ cat test.c
int main() {
    char buf[50];
    size_t len;
    for (len = 0; len < 10; ++len) {
        memset(buf, '!', sizeof(buf));
        ssize_t ret = readlink("/proc/self/exe", buf, len);
        buf[20] = '\0';
        printf("readlink(/proc/self/exe, {%s}, %zu) = %zi\n", buf, len, ret);
    }
    return 0;
}

Now compare the output of the native:
$ gcc test.c -o /tmp/x
$ /tmp/x
$ strace /tmp/x

With what qemu does:
$ armv7a-cros-linux-gnueabi-gcc test.c -o /tmp/x -static
$ qemu-arm /tmp/x
$ qemu-arm -strace /tmp/x

Signed-off-by: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:33 +03:00
Peter Maydell
c065976f2b linux-user: Fix conversion of sigevent argument to timer_create
There were a number of bugs in the conversion of the sigevent
argument to timer_create from target to host format:
 * signal number not converted from target to host
 * thread ID not copied across
 * sigev_value not copied across
 * we never unlocked the struct when we were done

Between them, these problems meant that SIGEV_THREAD_ID
timers (and the glibc-implemented SIGEV_THREAD timers which
depend on them) didn't work.

Fix these problems and clean up the code a little by pulling
the struct conversion out into its own function, in line with
how we convert various other structs. This allows the test
program in bug LP:1042388 to run.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:33 +03:00
Jincheng Miao
47575997be linux-user: Fix syscall instruction usermode emulation on X86_64
Currently syscall instruction is buggy on user mode X86_64,
the EIP is updated after do_syscall(), that is too late for
clone(). Because clone() will create a thread at the env->EIP
(the address of syscall insn), and then child thread enters
do_syscall() again, that is not expected. Sometimes it is tragic.

User mode syscall insn emulation is not used MSR, so the
action should be same to INT 0x80. INT 0x80 will update EIP in
do_interrupt(), ditto for syscall() for consistency.

Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:33 +03:00
Riku Voipio
0b2effd744 linux-user: redirect openat calls
While Mikhail fixed /proc/self/maps, it was noticed openat calls are
not redirected currently. Some archs don't have open at all, so
openat needs to be redirected.

Fix this by consolidating open/openat code to do_openat - open
is implemented using openat(AT_FDCWD, ... ), which according
to open(2) man page is identical.

Since all targets now have openat, remove the ifdef around sys_openat
and openat: case in do_syscall.

Cc: Mikhail Ilin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:33 +03:00
Mikhail Ilyin
d67f4aaae8 linux-user: /proc/self/maps content
Build /proc/self/maps doing a match against guest memory translation table.
Output only that map records which are valid for guest memory layout.

Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22 15:06:33 +03:00
Markus Armbruster
0a156f7c75 vmdk: Use bdrv_nb_sectors() where sectors, not bytes are wanted
Instead of bdrv_getlength().

Commit 57322b7 did this all over block, but one more bdrv_getlength()
has crept in since.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-22 11:10:12 +02:00
Fam Zheng
cbf95a0b11 blkdebug: Delete BH in bdrv_aio_cancel
Otherwise error_callback_bh will access the already released acb.

Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-22 11:07:00 +02:00
Stefan Hajnoczi
8d9eb33ca0 qemu-iotests: add test case 101 for short file I/O
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-22 11:01:12 +02:00
Stefan Hajnoczi
61ed73cff4 raw-posix: fix O_DIRECT short reads
The following O_DIRECT read from a <512 byte file fails:

  $ truncate -s 320 test.img
  $ qemu-io -n -c 'read -P 0 0 512' test.img
  qemu-io: can't open device test.img: Could not read image for determining its format: Invalid argument

Note that qemu-io completes successfully without the -n (O_DIRECT)
option.

This patch fixes qemu-iotests ./check -nocache -vmdk 059.

Cc: qemu-stable@nongnu.org
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-22 11:00:56 +02:00
Peter Lieven
d832fb4d66 block/iscsi: fix memory corruption on iscsi resize
bs->total_sectors is not yet updated at this point. resulting
in memory corruption if the volume has grown and data is written
to the newly availble areas.

CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-22 10:55:22 +02:00
Peter Maydell
fd3cced366 Merge remote-tracking branch 'remotes/otubo/seccomp' into staging
* remotes/otubo/seccomp:
  seccomp: add semctl() to the syscall whitelist

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-21 12:48:44 +01:00
Michael Tokarev
13b552c2f4 block/vvfat.c: remove debugging code to reinit stderr if NULL
Just log to stderr unconditionally, like other similar code does.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-21 10:36:29 +02:00
Paul Moore
b22876cc2f seccomp: add semctl() to the syscall whitelist
QEMU needs to call semctl() for correct operation.  This particular
problem was identified on shutdown with the following commandline:

 # qemu -sandbox on -monitor stdio \
   -device intel-hda -device hda-duplex -vnc :0

Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
2014-08-21 10:29:16 +02:00
Michael S. Tsirkin
288d332202 hostmem: set MPOL_MF_MOVE
When memory is allocated on a wrong node, MPOL_MF_STRICT
doesn't move it - it just fails the allocation.
A simple way to reproduce the failure is with mlock=on
realtime feature.

The code comment actually says: "ensure policy won't be ignored"
so setting MPOL_MF_MOVE seems like a better way to do this.

Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-08-20 21:15:56 +02:00
David Hildenbrand
c8e2085d8e kvm: run cpu state synchronization on target vcpu thread
As already done for kvm_cpu_synchronize_state(), let's trigger
kvm_arch_put_registers() via run_on_cpu() for kvm_cpu_synchronize_post_reset()
and kvm_cpu_synchronize_post_init().

This way, we make sure that the register synchronizing ioctls are
called from the proper vcpu thread; this avoids calls to
synchronize_rcu() in the kernel.

Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-20 15:21:00 +02:00
Max Reitz
911864c6e5 iotests: Add test for image filename construction
Testing a real in-use protocol such as NBD is hard; testing blkdebug and
blkverify in its stead is easier and tests basically the same
functionality.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20 14:33:42 +02:00
Max Reitz
fafcfe228d quorum: Implement bdrv_refresh_filename()
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20 14:31:56 +02:00
Max Reitz
2019d68b3b nbd: Implement bdrv_refresh_filename()
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20 14:31:56 +02:00
Max Reitz
74b36b2eb8 blkverify: Implement bdrv_refresh_filename()
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20 14:31:56 +02:00
Max Reitz
2c31b04c94 blkdebug: Implement bdrv_refresh_filename()
Because blkdebug cannot simply create a configuration file, simply
refuse to reconstruct a plain filename and only generate an options
QDict from the rules instead.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20 14:31:56 +02:00
Max Reitz
91af701412 block: Add bdrv_refresh_filename()
Some block devices may not have a filename in their BDS; and for some,
there may not even be a normal filename at all. To work around this, add
a function which tries to construct a valid filename for the
BDS.filename field.

If a filename exists or a block driver is able to reconstruct a valid
filename (which is placed in BDS.exact_filename), this can directly be
used.

If no filename can be constructed, we can still construct an options
QDict which is then converted to a JSON object and prefixed with the
"json:" pseudo protocol prefix. The QDict is placed in
BDS.full_open_options.

For most block drivers, this process can be done automatically; those
that need special handling may define a .bdrv_refresh_filename() method
to fill BDS.exact_filename and BDS.full_open_options themselves.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20 14:31:56 +02:00
zhanghailiang
1bdb176ac5 virtio-blk: fix reference a pointer which might be freed
In function virtio_blk_handle_request, it may freed memory pointed by req,
So do not access member of req after calling this function.

Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20 11:57:05 +02:00
Stefan Hajnoczi
466560b9fc virtio-blk: allow block_resize with dataplane
Now that block_resize acquires the AioContext we can safely allow
resizing the disk.

Reported-by: Andrey Korolyov <andrey@xdel.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20 11:53:52 +02:00
Stefan Hajnoczi
927e0e769f block: acquire AioContext in qmp_block_resize()
Make block_resize safe for dataplane where another thread may be running
the BlockDriverState's AioContext.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20 11:53:42 +02:00
Kevin Wolf
6ffb4cb6fd qemu-iotests: Fix 028 reference output for qed
We need to filter out driver-specific options in the "Formatting..."
string printed by qemu when creating the backup image.

Reported-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Peter Wu <peter@lekensteyn.nl>
2014-08-20 11:51:28 +02:00
Ming Lei
61ff8cfbec test-coroutine: test cost introduced by coroutine
This test runs dummy function with coroutine by using
two enter and one yield since which is a common usage.

So we can see the cost introduced by corouting for running
one function, for example:

	Run operation 20000000 iterations 4.841071 s, 4131K operations/s
	242ns per coroutine

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20 11:51:28 +02:00
Max Reitz
a1cb48a3bf iotests: Add test for qcow2's cache options
Add a test which tests various combinations of qcow2's cache options
(some of which are valid, some of which are not).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20 11:51:28 +02:00
Max Reitz
6c1c8d5d3e qcow2: Add runtime options for cache sizes
Add options for specifying the size of the metadata caches. This can
either be done directly for each cache (if only one is given, the other
will be derived according to a default ratio) or combined for both.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20 11:51:28 +02:00
Max Reitz
02004bd4ba qcow2: Use g_try_new0() for cache array
With a variable cache size, the number given to qcow2_cache_create() may
be huge. Therefore, use g_try_new0().

While at it, use g_new0() instead of g_malloc0() for allocating the
Qcow2Cache object.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20 11:51:28 +02:00
Max Reitz
440ba08aea qcow2: Constant cache size in bytes
Specifying the metadata cache sizes in clusters results in less clusters
(and much less bytes) covered for small cluster sizes and vice versa.
Using a constant byte size reduces this difference, and makes it
possible to manually specify the cache size in an easily comprehensible
unit.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20 11:51:28 +02:00