Currently the hcd-xhci-pci and hcd-xhci-sysbus devices, which are
mostly wrappers around the TYPE_XHCI device, which is a direct
subclass of TYPE_DEVICE. Since TYPE_DEVICE devices are not on any
qbus and do not get automatically reset, the wrapper devices both
reset the TYPE_XHCI device in their own reset functions. However,
they do this using device_legacy_reset(), which will reset the device
itself but not any bus it has.
Switch to device_cold_reset(), which avoids using a deprecated
function and also propagates reset along any child buses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221014145423.2102706-1-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes: effaf5a240
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221105114851.306206-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Run state is also in RUN_STATE_PRELAUNCH while "-S" is used.
This reverts commit 0631d4b448
Signed-off-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The original commit broke the usage of usbredir with libvirt, which
starts every domain with "-S".
This workaround is no longer needed because the usbredir behavior
has been fixed in the meantime:
https://gitlab.freedesktop.org/spice/usbredir/-/merge_requests/61
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Message-Id: <1689cec3eadcea87255e390cb236033aca72e168.1669193161.git.jtomko@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Variable unconnected used in usb_host_auto_check function is only incremented
but never read as line where it is read was disabled since introducing the code.
This causes 'Unused but set variable' warning on Clang 15.0.1 compiler.
Removing the variable and disabled code to prevent the warning.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <00df0db69ff9167d38bac81f6d03281955bd861a.1668009030.git.mrezanin@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The TABs should be replaced with spaces, to make sure that we have a
consistent coding style with an indentation of 4 spaces everywhere.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/370
Signed-off-by: Amarjargal Gundjalam <amarjargal16@gmail.com>
Message-Id: <6c993f57800f8fef7a910074620f6e80e077a3d1.1666707782.git.amarjargal16@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use g_mkdir() to create a directory on all platforms.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221006151927.2079583-8-bmeng.cn@gmail.com>
Message-Id: <20221027183637.2772968-15-alex.bennee@linaro.org>
These memory allocation functions return void *, and casting to
another pointer type is useless clutter. Drop these casts.
If you really want another pointer type, consider g_new().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220923120025.448759-3-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The xHCI controller will ignore the endpoint MTU and so may deliver
packets of any length. Detect short packets as being any packet that
has a length of zero or a length that is not a multiple of the MTU.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Message-Id: <20220906183053.3625472-4-mcb30@ipxe.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The USB_CDC_SET_ETHERNET_PACKET_FILTER request is mandatory for
CDC-ECM devices. Accept this request, ignoring the actual filter
value (to match the existing behaviour for RNDIS).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Message-Id: <20220906183053.3625472-3-mcb30@ipxe.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usbnet_receive() does not currently wake up the USB endpoint, leading
to a dead RX datapath when used with a host controller such as xHCI
that relies on being woken up.
Fix by adding a call to usb_wakeup() at the end of usbnet_receive().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Message-Id: <20220906183053.3625472-2-mcb30@ipxe.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The abort() in xhci_find_stream() can be triggered via enabling the secondary
stream arrays by setting linear stream array (LSA) bit (in endpoint context) to
0. We may show warnings and drop this operation.
Fixes: 024426acc0 ("usb-xhci: usb3 streams")
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1192
Signed-off-by: Qiang Liu <cyruscyliu@gmail.com>
Message-Id: <20220904125926.2141607-1-cyruscyliu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add handler for fatal errors. Moves device into error state where it
stops responding until the guest resets it.
Guest can send illegal requests where scsi command and usb packet
transfer directions are inconsistent. Use the new usb_msd_fatal_error()
function instead of assert() in that case.
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Qiang Liu <cyruscyliu@gmail.com>
Message-Id: <20220830063827.813053-3-kraxel@redhat.com>
Change ordering to avoid adding forward declarations in
following patches. Fix comment code style while being
at it. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220830063827.813053-2-kraxel@redhat.com>
An abort happens in ohci_frame_boundary() when ohci->done is 0 [1].
``` c
static void ohci_frame_boundary(void *opaque)
{
// ...
if (ohci->done_count == 0 && !(ohci->intr_status & OHCI_INTR_WD)) {
if (!ohci->done)
abort(); <----------------------------------------- [1]
```
This was reported in https://bugs.launchpad.net/qemu/+bug/1911216/,
https://lists.gnu.org/archive/html/qemu-devel/2021-06/msg03613.html, and
https://gitlab.com/qemu-project/qemu/-/issues/545. I can still reproduce it with
the latest QEMU.
This happends due to crafted ED with putting ISO_TD at physical address 0.
Suppose ed->head & OHCI_DPTR_MASK is 0 [2], and we memset 0 to the phyiscal
memory from 0 to sizeof(ohci_iso_td). Then, starting_frame [3] and frame_count
[4] are both 0. As we can control the value of ohci->frame_number (0 to 0x1f,
suppose 1), we then control the value of relative_frame_number to be 1 [6]. The
control flow goes to [7] where ohci->done is 0. Have returned from
ohci_service_iso_td(), ohci_frame_boundary() will abort() [1].
``` c
static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed)
{
// ...
addr = ed->head & OHCI_DPTR_MASK; // <--------------------- [2]
if (ohci_read_iso_td(ohci, addr, &iso_td)) { // <-------- [3]
// ...
starting_frame = OHCI_BM(iso_td.flags, TD_SF); // <-------- [4]
frame_count = OHCI_BM(iso_td.flags, TD_FC); // <-------- [5]
relative_frame_number = USUB(ohci->frame_number, starting_frame);
// <-------- [6]
if (relative_frame_number < 0) {
return 1;
} else if (relative_frame_number > frame_count) {
// ...
ohci->done = addr; // <-------- [7]
// ...
}
```
As only (afaik) a guest root user can manipulate ED, TD and the physical memory,
this assertion failure is not a security bug.
The idea to fix this issue is to drop ohci_service_iso_td() if ed->head &
OHCI_DPTR_MASK is 0, which is similar to the drop operation for
ohci_service_ed_list() when head is 0. Probably, a similar issue is in
ohci_service_td(). I drop ohci_service_td() if ed->head & OHCI_DPTR_MASK is 0.
Fixes: 7bfe577702 ("OHCI USB isochronous transfers support (Arnon Gilboa)")
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/545
Buglink: https://lists.gnu.org/archive/html/qemu-devel/2021-06/msg03613.html
Buglink: https://bugs.launchpad.net/qemu/+bug/1911216
Signed-off-by: Qiang Liu <cyruscyliu@gmail.com>
Message-Id: <20220826051557.119570-1-cyruscyliu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If a guest sets up bad descriptors, it could force QEMU to access
non-existing memory regions. Thus we should check the return value
of dma_memory_read/write() to make sure that these errors don't go
unnoticed.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220817160016.49752-1-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The compiler isn't clever enough to figure 'width' is a constant,
so help it by using a definitions instead.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220819153931.3147384-10-peter.maydell@linaro.org
When a SCSI command is received from the guest, the CDB length implied
by the first byte might exceed the number of bytes the guest sent. In
this case scsi_req_new() will read uninitialized data, causing
unpredictable behavior.
Adds the buf_len parameter to scsi_req_new() and plumbs it through the
call stack.
Signed-off-by: John Millikin <john@john-millikin.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1127
Message-Id: <20220817053458.698416-1-john@john-millikin.com>
[Fill in correct length for adapters other than ESP. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The loop condition in xhci_ring_chain_length() is under control of
the guest, and additionally the code does not check for failed DMA
transfers (e.g. if reaching the end of the RAM), so the loop there
could run for a very long time or even forever. Fix it by checking
the return value of dma_memory_read() and by introducing a maximum
loop length.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/646
Message-Id: <20220804131300.96368-1-thuth@redhat.com>
Reviewed-by: Mauro Matteo Cascella <mcascell@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Canokey core currently using 16 bytes as maximum packet size for
control endpoint, but to run the device in high-speed a 64 bytes
maximum packet size is required according to USB 2.0 specification.
Since we don't acutally need to run the device in high-speed, simply
don't assign high member in USBDesc.
When canokey-qemu is used with xhci, xhci would drive canokey
in high speed mode, since the bcdUSB in canokey-core is 2.1,
yet canokey-core set bMaxPacketSize0 to be 16, this is out
of the spec as the spec said that ``The allowable maximum
control transfer data payload sizes...for high-speed devices,
it is 64 bytes''.
In this case, usb device validation in Windows 10 LTSC 2021
as the guest would fail. It would complain
USB\DEVICE_DESCRIPTOR_VALIDATION_FAILURE.
Note that bcdUSB only identifies the spec version the device
complies, but it has no indication of its speed. So it is
allowed for the device to run in FS but comply the 2.1 spec.
To solve the issue we decided to just drop the high
speed support. This only affects usb-ehci as usb-ehci would
complain speed mismatch when FS device is attached to a HS port.
That's why the .high member was initialized in the first place.
Meanwhile, xhci is not affected as it works well with FS device.
Since everyone is now using xhci, it does no harm to most users.
Suggested-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Signed-off-by: YuanYang Meng <mkfssion@mkfssion.com>
Reviewed-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Message-Id: <20220625142138.19363-1-mkfssion@mkfssion.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
CCID could send zero-length packet (ZLP)
if we invoke two data_in, two packets would be concated
and we could not distinguish them.
The CANOKEY_EMU_EP_CTAPHID is imported from canokey-qemu.h
Reported-by: MkfsSion <myychina28759@gmail.com>
Signed-off-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Message-Id: <YqcqGz0s3+LE42ms@Sun>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When launching QEMU with "-loadvm", usbredir_create_parser() should avoid
setting up the hello packet (just as with "-incoming". On the latest version
of libusbredir, usbredirparser_unserialize() will return error if the parser
is not "pristine."
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-Id: <20220507041850.98716-1-j@getutm.app>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'active' bit passes control over a qTD between the guest and the
controller: set to 1 by guest to enable execution by the controller,
and the controller sets it to '0' to hand back control to the guest.
ehci_state_writeback write two dwords to main memory using DMA:
the third dword of the qTD (containing dt, total bytes to transfer,
cpage, cerr and status) and the fourth dword of the qTD (containing
the offset).
This commit makes sure the fourth dword is written before the third,
avoiding a race condition where a new offset written into the qTD
by the guest after it observed the status going to go to '0' gets
overwritten by a 'late' DMA writeback of the previous offset.
This race condition could lead to 'cpage out of range (5)' errors,
and reproduced by:
./qemu-system-x86_64 -enable-kvm -bios $SEABIOS/bios.bin -m 4096 -device usb-ehci -blockdev driver=file,read-only=on,filename=/home/aengelen/Downloads/openSUSE-Tumbleweed-DVD-i586-Snapshot20220428-Media.iso,node-name=iso -device usb-storage,drive=iso,bootindex=0 -chardev pipe,id=shell,path=/tmp/pipe -device virtio-serial -device virtconsole,chardev=shell -device virtio-rng-pci -serial mon:stdio -nographic
(press a key, select 'Installation' (2), and accept the default
values. On my machine the 'cpage out of range' is reproduced while
loading the Linux Kernel about once per 7 attempts. With the fix in
this commit it no longer fails)
This problem was previously reported as a seabios problem in
https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/thread/OUTHT5ISSQJGXPNTUPY3O5E5EPZJCHM3/
and as a nixos CI build failure in
https://github.com/NixOS/nixpkgs/issues/170803
Signed-off-by: Arnout Engelen <arnout@bzzt.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This commit added a new emulated device called CanoKey to QEMU.
CanoKey implements platform independent features in canokey-core
https://github.com/canokeys/canokey-core, and leaves the USB implementation
to the platform.
In this commit the USB part was implemented in QEMU using QEMU's USB APIs,
therefore the emulated CanoKey can communicate with the guest OS using USB.
Signed-off-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Message-Id: <YoY6Mgph6f6Hc/zI@Sun>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
module_kconfig is a new directive that should be used with module_obj
whenever that module depends on the Kconfig to be enabled.
When the module is enabled in Kconfig we are sure that its dependencies
will be enabled as well, thus the module will be loaded without any
problem.
The correct way to use module_kconfig is by passing the Kconfig option
to module_kconfig (or the *config-devices.mak without CONFIG_).
Signed-off-by: Jose R. Ziviani <jziviani@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Message-Id: <165369002370.5857.12150544416563557322.stgit@work>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Change to generated file ebpf/rss.bpf.skeleton.h backed out]
qemu_oom_check() is a function which essentially says "if you pass me
a NULL pointer then print a message then abort()". On POSIX systems
the message includes strerror(errno); on Windows it includes the
GetLastError() error value printed as an integer.
Other than in the implementation of qemu_memalign(), we use this
function only in hw/usb/redirect.c, for three checks:
* on a call to usbredirparser_create()
* on a call to usberedirparser_serialize()
* on a call to malloc()
The usbredir library API functions make no guarantees that they will
set errno on errors, let alone that they might set the
Windows-specific GetLastError string. malloc() is documented as
setting errno, not GetLastError -- and in any case the only thing it
might set errno to is ENOMEM. So qemu_oom_check() isn't the right
thing for any of these. Replace them with straightforward
error-checking code. This will allow us to get rid of
qemu_oom_check().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220226180723.1706285-2-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since isochronous transfers cannot be handled async (the function
returns error in that case) we don't need to remember the packet.
Avoid using the usb_packet field in OHCIState (as that can be a
waiting async packet on another endpoint) and allocate and use a local
USBPacket for the iso transfer instead. After this we don't have to
care if we're called from a completion callback or not so we can drop
that parameter as well.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <bf523d40f8088a84383cb00ffd2e6e82fa47790d.1643117600.git.balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These two do the same and only used once so no need to have two
functions, simplify by merging them.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <5fc8ba0bbf55703014d22dd06ab2f9eabaf370bf.1643117600.git.balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is always done before calling this function so remove duplicated
code and do it within the function at one place.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <ce766722506bfd7145cccbec750692ff57072280.1643117600.git.balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Current code creates directories with mode 0644. Even the creator
can't create files in the new directory. Set all x mode flags in
variable mask and clear all x mode flags in function open() to
preserve the current open mode.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20220122140619.7514-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
xhciwmi.exe is used inside Windows 2022 SVVP tests. This tool called as
'xhciwmi.exe --verify' reports that 'The firmware loaded on this
controller has known bugs and/or compatibility issues'. This is just
a warning but there is no particular sense to ignore it.
This patch just pacifies the tool.
There is a big question whether this change should be put using
machine type mechanics, but at my opinion this would be an overkill.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Tested-by: Pavel Polozov <pavel.polozov@virtuozzo.com>
CC: Yan Vugenfirer <yvugenfi@redhat.com>
CC: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Message-Id: <20211223095443.130276-1-den@openvz.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
More than 1k of TypeInfo instances are already marked as const. Mark the
remaining ones, too.
This commit was created with:
git grep -z -l 'static TypeInfo' -- '*.c' | \
xargs -0 sed -i 's/static TypeInfo/static const TypeInfo/'
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20220117145805.173070-2-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Otherwise we run the error handling code even for successful requests.
Fixes: 13b250b12a ("uas: add stream number sanity checks.")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211210080659.2537084-1-kraxel@redhat.com>
A device of USB video class usually uses larger desc structure, so
use larger buffer to avoid failure. (dev-video.c is ready)
This is an unlikely code path:
1, during guest startup, guest tries to probe device.
2, run 'lsusb' command in guest(or other similar commands).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220112015835.900619-1-pizhenwei@bytedance.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Linux need to fill up the HID descriptor in order to let the driver be
emulated. The descriptor was downloaded from [1]. The patch was tested
with evtest tool on top of qemu 5.2.0 with linux kernel 4.19.208.
[1] https://github.com/linuxwacom/wacom-hid-descriptors/tree/master/Wacom%20PenPartner
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Message-Id: <20220112090125.381364-1-dario.binacchi@amarulasolutions.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Let devices specify transaction attributes when calling ld*_pci_dma().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-22-philmd@redhat.com>
dma_memory_read() returns a MemTxResult type. Do not discard
it, return it to the caller.
Update the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-19-philmd@redhat.com>
Let devices specify transaction attributes when calling ld*_dma().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-17-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_memory_map().
Patch created mechanically using spatch with this script:
@@
expression E1, E2, E3, E4;
@@
- dma_memory_map(E1, E2, E3, E4)
+ dma_memory_map(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-7-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_memory_rw().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-5-philmd@redhat.com>
This is a counterpart to the HMP "info usb" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This device is part of a superio/ISA bridge chip and IRQs from it are
routed to an ISA interrupt set by the Interrupt Line PCI config
register. Implement this in a vt82c686-uhci-pci specific irq handler
Using via_isa_set_irq().
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <8d7ed385e33a847d8ddc669163a68b5ca57f82ce.1635161629.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instead of using pci_set_irq, store the irq in the device state and
use it explicitly so variants having different interrupt handling can
use their own.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <b39066e03c8731f4197d50bc79b403f797599999.1635161629.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Because this device only works as part of VIA superio chips set user
creatable to false. Since the class init method is common for UHCI
variants introduce a flag in UHCIInfo for this.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <e6abf1f19ca72bbc2d8a5a6aa941edbf87a9845f.1635161629.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fix a comment for coding style so subsequent patch will not get
checkpatch error and simplify and shorten uhci_update_irq().
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <b68a57dfcf181e73272b4dc951f8cc6e76b0d182.1635161629.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Rename qbus_create_inplace() to qbus_init(); this is more in line
with our usual naming convention for functions that in-place
initialize objects.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20210923121153.23754-5-peter.maydell@linaro.org
The function scsi_bus_new() creates a new SCSI bus; callers can
either pass in a name argument to specify the name of the new bus, or
they can pass in NULL to allow the bus to be given an automatically
generated unique name. Almost all callers want to use the
autogenerated name; the only exception is the virtio-scsi device.
Taking a name argument that should almost always be NULL is an
easy-to-misuse API design -- it encourages callers to think perhaps
they should pass in some standard name like "scsi" or "scsi-bus". We
don't do this anywhere for SCSI, but we do (incorrectly) do it for
other bus types such as i2c.
The function name also implies that it will return a newly allocated
object, when it in fact does in-place allocation. We more commonly
name such functions foo_init(), with foo_new() being the
allocate-and-return variant.
Replace all the scsi_bus_new() callsites with either:
* scsi_bus_init() for the usual case where the caller wants
an autogenerated bus name
* scsi_bus_init_named() for the rare case where the caller
needs to specify the bus name
and document that for the _named() version it's then the caller's
responsibility to think about uniqueness of bus names.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210923121153.23754-2-peter.maydell@linaro.org
The device uses the guest-supplied stream number unchecked, which can
lead to guest-triggered out-of-band access to the UASDevice->data3 and
UASDevice->status3 fields. Add the missing checks.
Fixes: CVE-2021-3713
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reported-by: Chen Zhe <chenzhe@huawei.com>
Reported-by: Tan Jingguo <tanjingguo@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210818120505.1258262-2-kraxel@redhat.com>
Since commit 9894dc0cdc "char: convert
from GIOChannel to QIOChannel", the first argument to the watch callback
can actually be a QIOChannel, which is not a GIOChannel (but a QEMU
Object).
Even though we never used that pointer, change the callback type to warn
the users. Possibly a better fix later, we may want to store the
callback and call it from intermediary functions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
data might point into the middle of a larger buffer, there is a separate
free_on_destroy pointer passed into bufp_alloc() to handle that. It is
only used in the normal workflow though, not when dropping packets due
to the queue being full. Fix that.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/491
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210722072756.647673-1-kraxel@redhat.com>
On windows we can't wait on file descriptors.
Poll libusb using a timer instead.
Fixes long-standing FIXME.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/431
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210623085249.1151901-2-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Drop one more shared library dependency (libusb) from core qemu.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-34-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-33-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce an usb device flag instead, set it when usb-host looks at the
device descriptors anyway. Also set it for emulated storage devices,
for consistency. Add an inline helper function to check the flag.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-32-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-11-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-10-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The GDateTime APIs provided by GLib avoid portability pitfalls, such
as some platforms where 'struct timeval.tv_sec' field is still 'long'
instead of 'time_t'. When combined with automatic cleanup, GDateTime
often results in simpler code too.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Per xHCI spec v1.2 chapter 4.17.5 page 296:
If MSI or MSI-X interrupts are enabled, Interrupt Pending (IP)
shall be cleared automatically when the PCI dword write generated
by the interrupt assertion is complete.
Currently QEMU does not clear the IP flag in the MSI / MSI-X mode.
This causes subsequent spurious interrupt to be delivered to guests.
To solve this, we change the xhci intr_raise() hook routine to have
a bool return value that is passed to its caller (the xhci core),
with true indicating that IP should be self-cleared.
Fixes: 62c6ae04cf ("xhci: Initial xHCI implementation")
Fixes: 4c47f80063 ("xhci: add msix support")
Signed-off-by: Ruimei Yan <ruimei.yan@windriver.com>
[bmeng: move IP clear codes from xhci pci to xhci core]
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20210521024224.2277634-2-bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
At present MSI / MSI-X interrupts are triggered regardless of the
irq level. We should have checked the level to determine whether
the interrupt needs to be delivered.
The level check logic was present in early versions of the xhci
model, but got dropped later by a rework of interrupt handling
under commit 4c4abe7cc9 ("xhci: rework interrupt handling").
Fixes: 4c4abe7cc9 ("xhci: rework interrupt handling")
Signed-off-by: Ruimei Yan <ruimei.yan@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20210521024224.2277634-1-bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
usb-host and usb-redirect try to batch bulk transfers by combining many
small usb packets into a single, large transfer request, to reduce the
overhead and improve performance.
This patch adds a size limit of 1 MiB for those combined packets to
restrict the host resources the guest can bind that way.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210503132915.2335822-6-kraxel@redhat.com>
If the Kconfig 'USB' value is not selected, it is pointless to
build the USB core components. Add a stub for the HMP commands
and usbdevice_create() which is called by usb_device_add in
softmmu/vl.c.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210424224110.3442424-3-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Many files include qemu/log.h without needing it. Remove the superfluous
include statements.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210328054833.2351597-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Many files include hw/irq.h without needing it. Remove the superfluous
include statements.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210327050236.2232347-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Many files include hw/sysbus.h without needing it. Remove the superfluous
include statements.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210327082804.2259480-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
QEMU crashes with certain targets when trying to show the help
output of EHCI devices:
$ ./qemu-system-aarch64 -device ich9-usb-ehci1,help
qemu-system-aarch64: ../../devel/qemu/softmmu/physmem.c:1154: phys_section_add:
Assertion `map->sections_nb < TARGET_PAGE_SIZE' failed.
Aborted (core dumped)
This happens because the device is doing things at "instance_init" time
that should be done at "realize" time instead. So move the related code
to the realize() function instead. (NB: This now also matches the
memory_region_del_subregion() calls which are done in usb_ehci_unrealize(),
and not during finalize()).
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210326095155.1994604-1-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When building with --enable-sanitizers we get:
Direct leak of 32 byte(s) in 2 object(s) allocated from:
#0 0x5618479ec7cf in malloc (qemu-system-aarch64+0x233b7cf)
#1 0x7f675745f958 in g_malloc (/lib64/libglib-2.0.so.0+0x58958)
#2 0x561847f02ca2 in usb_packet_init hw/usb/core.c:531:5
#3 0x561848df4df4 in usb_ehci_init hw/usb/hcd-ehci.c:2575:5
#4 0x561847c119ac in ehci_sysbus_init hw/usb/hcd-ehci-sysbus.c:73:5
#5 0x56184a5bdab8 in object_init_with_type qom/object.c:375:9
#6 0x56184a5bd955 in object_init_with_type qom/object.c:371:9
#7 0x56184a5a2bda in object_initialize_with_type qom/object.c:517:5
#8 0x56184a5a24d5 in object_initialize qom/object.c:536:5
#9 0x56184a5a2f6c in object_initialize_child_with_propsv qom/object.c:566:5
#10 0x56184a5a2e60 in object_initialize_child_with_props qom/object.c:549:10
#11 0x56184a5a3a1e in object_initialize_child_internal qom/object.c:603:5
#12 0x561849542d18 in npcm7xx_init hw/arm/npcm7xx.c:427:5
Similarly to commit d710e1e7bd ("usb: ehci: fix memory leak in
ehci"), fix by calling usb_ehci_finalize() to free the USBPacket.
Fixes: 7341ea075c
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210323183701.281152-1-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
"-usbdevice ccid" was not documented and -usbdevice itself was marked
as deprecated before QEMU v6.0. And searching for "-usbdevice ccid"
in the internet does not show any useful results, so likely nobody
was using the ccid device via the -usbdevice option. Remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210311092829.1479051-1-thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Stale data in csw (specifically residue) can confuse the state machine
and allows the guest trigger an assert(). So clear csw on reset to
avoid this happening in case the guest resets the device in the middle
of a request.
Buglink: https://bugs.launchpad.net/qemu/+bug/1523811
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210312094954.796799-1-kraxel@redhat.com>
Add new kconfig symbols so usb-storage and usb-bot can
be enabled or disabled individually at build time.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210312090425.772900-5-kraxel@redhat.com>
