Commit Graph

583 Commits

Author SHA1 Message Date
John Snow
659142ecf7 ahci: Update byte count after DMA completion
Currently, DMA read/write operations neglect to update
the byte count after a successful transfer like ATAPI
DMA read or PIO read/write operations do.

We correct this oversight by adding another callback into
the IDEDMAOps structure. The commit callback is called
whenever we are cleaning up a scatter-gather list.
AHCI can register this callback in order to update post-
transfer information such as byte count updates.

We use this callback in AHCI to consolidate where we delete
the SGlist as generated from the PRDT, as well as update the
byte count after the transfer is complete.

The QEMUSGList structure has an init flag added to it in order
to make qemu_sglist_destroy a nop if it is called when
there is no sglist, which simplifies cleanup and error paths.

This patch fixes several AHCI problems, notably Non-NCQ modes
of operation for Windows 7 as well as Hibernate support for Windows 7.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412204151-18117-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-03 09:48:41 +00:00
John Snow
7b8bad1b6a ahci: Correct PIO/D2H FIS responses
Currently, the D2H FIS packets AHCI generates simply parrot back
the LBA that the guest sent to us in the cmd_fis. However, some
commands (like READ NATIVE MAX) modify the LBA registers as a
return value, through which the AHCI D2H FIS is the only response
mechanism. Thus, the D2H response should use the current register
values, not the initial ones.

This patch adjusts the LBA and drive select register responses for
PIO Setup and D2H FIS response packets.

Additionally, the PIO and D2H FIS responses copy too many bytes
from the command FIS that it is being generated from. Specifically,
byte 11 which is the Features(15:8) field for Register Host to
Device FIS packets, is instead reserved for the PIO Setup FIS and
should always be 0.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412204151-18117-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-03 09:48:41 +00:00
James Harper
d4f9e806c2 fix off-by-one error in pci_piix3_xen_ide_unplug
Fix off-by-one error when unplugging disks, which would otherwise leave the last ATA disk plugged, with obvious consequences. Also rewrite loop to be more readable.

Signed-off-by: James Harper <james.harper@ejbdigital.com.au>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-10-30 14:16:39 +00:00
Markus Armbruster
7797a73947 hmp: Remove "info pcmcia"
This command lists PCMCIA sockets and cards.  Only a few ARM boards
have sockets (akita, borzoi, connex, mainstone, spitz, terrier, tosa,
verdex, z2), the only card is the DSCM-1xxxx Hitachi Microdrive (qdev
"microdrive"), and it is only inserted during machine init, if ever.
So this command doesn't really tell anybody anything new so far.

Moreover, pcmcia_socket_unregister() has a use-after-free bug, flagged
by Coverity.  Has never been used, because there has never been code
to eject a PCMCIA card.

Not worth fixing & converting to QMP.  Remove it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
Message-id: 1411144812-22958-1-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-24 12:19:11 +01:00
Markus Armbruster
26f8b3a847 blockdev: Fix blockdev-add not to create DriveInfo
blockdev_init() always creates a DriveInfo, but only drive_new() fills
it in.  qmp_blockdev_add() leaves it blank.  This results in a drive
with type = IF_IDE, bus = 0, unit = 0.  Screwed up in commit ee13ed1c.

Board initialization code looking for IDE drive (0,0) can pick up one
of these bogus drives.  The QMP command has to execute really early to
be visible.  Not sure how likely that is in practice.

Fix by creating DriveInfo in drive_new().  Block backends created by
blockdev-add don't get one.

Breaks the test for "has been created by qmp_blockdev_add()" in
blockdev_mark_auto_del() and do_drive_del(), because it changes the
value of dinfo && !dinfo->enable_auto_del from true to false.  Simply
test !dinfo instead.

Leaves DriveInfo member enable_auto_del unused.  Drop it.

A few places assume a block backend always has a DriveInfo.  Fix them
up.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 14:03:50 +02:00
Markus Armbruster
a987ee1f1b ide: Complete conversion from BlockDriverState to BlockBackend
Add a BlockBackend member to TrimAIOCB, so ide_issue_trim_cb() can use
blk_aio_discard() instead of bdrv_aio_discard().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 14:03:50 +02:00
Markus Armbruster
4be746345f hw: Convert from BlockDriverState to BlockBackend, mostly
Device models should access their block backends only through the
block-backend.h API.  Convert them, and drop direct includes of
inappropriate headers.

Just four uses of BlockDriverState are left:

* The Xen paravirtual block device backend (xen_disk.c) opens images
  itself when set up via xenbus, bypassing blockdev.c.  I figure it
  should go through qmp_blockdev_add() instead.

* Device model "usb-storage" prompts for keys.  No other device model
  does, and this one probably shouldn't do it, either.

* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
  blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
  which has only the BlockDriverState.

* PC87312State has an unused BlockDriverState[] member.

The next two commits take care of the latter two.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 14:02:25 +02:00
Markus Armbruster
097310b53e block: Rename BlockDriverCompletionFunc to BlockCompletionFunc
I'll use it with block backends shortly, and the name is going to fit
badly there.  It's a block layer thing anyway, not just a block driver
thing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 13:41:27 +02:00
Markus Armbruster
7c84b1b831 block: Rename BlockDriverAIOCB* to BlockAIOCB*
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there.  It's a block layer thing anyway, not just a
block driver thing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 13:41:27 +02:00
Markus Armbruster
fa1d36df74 block: Eliminate DriveInfo member bdrv, use blk_by_legacy_dinfo()
The patch is big, but all it really does is replacing

    dinfo->bdrv

by

    blk_bs(blk_by_legacy_dinfo(dinfo))

The replacement is repetitive, but the conversion of device models to
BlockBackend is imminent, and will shorten it to just
blk_legacy_dinfo(dinfo).

Line wrapping muddies the waters a bit.  I also omit tests whether
dinfo->bdrv is null, because it never is.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 13:41:27 +02:00
Markus Armbruster
b9fe8a7a12 blockdev: Eliminate drive_del()
drive_del() has become a trivial wrapper around blk_unref().  Get rid
of it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 13:41:26 +02:00
Gonglei
d2b186f96d ide: add calling add_boot_device_patch in bootindex setter function
On this way, we can assure the new bootindex take effect
during vm rebooting. Meanwhile set the initial value of
bootindex to -1.

Because ide devcies's unit property maybe
do not initialize when set_bootindex function is called,
so that we don't know its suffix. So we have to save the
call add_boot_device_path() on ide realize/init function.
When we want to change bootindex during vm rebooting, we
can call it in setter function.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 10:45:51 +02:00
Gonglei
4556363087 ide: add bootindex to qom property
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 09:52:55 +02:00
John Snow
d93162e13c q35/ahci: Pick up -cdrom and -hda options
This patch implements the backend for the Q35 board
for us to be able to pick up and use drives defined
by the -cdrom, -hda, or -drive if=ide shorthand options.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-03 10:30:33 +01:00
John Snow
d8f94e1bb2 ide: Update ide_drive_get to be HBA agnostic
Instead of duplicating the logic for the if_ide
(bus,unit) mappings, rely on the blockdev layer
for managing those mappings for us, and use the
drive_get_by_index call instead.

This allows ide_drive_get to work for AHCI HBAs
as well, and can be used in the Q35 initialization.

Lastly, change the nature of the argument to
ide_drive_get so that represents the number of
total drives we can support, and not the total
number of buses. This will prevent array overflows
if the units-per-default-bus property ever needs
to be adjusted for compatibility reasons.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-03 10:30:33 +01:00
John Snow
fac7aa7fc2 ahci: properly shadow the TFD register
In a real AHCI device, several S/ATA registers are mirrored or shadowed
within the AHCI register set. These registers are not updated
synchronously for each read access, but are instead updated after a
Device-to-Host Register FIS packet is received. The D2H FIS contains
the values from these registers on the device.

In QEMU, by reaching directly into the device to grab these bits before
they are "sent," we may introduce race conditions where unexpected
values are present "before they are sent" which could cause issues for
some guests, particularly if an attempt is made to read the PxTFD
register prior to enabling the port, where incorrect values will be read.

This patch also addresses the boot-time values for the PxTFD and PxSIG
registers to bring them in line with the AHCI 1.3 specification.

Lastly, several fields (PxTFD, PxSIG and PxSACT) are read-only,
and any attempts to write to them should be ignored.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1408643079-30675-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22 11:39:41 +01:00
John Snow
c8b5b20f81 ahci: MSI capability should be at 0x80, not 0x50.
In the Intel ICH9 data sheet, the MSI capability offset
in the PCI configuration space for ICH9 AHCI devices is
specified to be 0x80.

Further, the PCI capability pointer should always point
to 0x80 in ICH9 devices, despite the fact that AHCI 1.3
specifies that it should be pointing to PMCAP (Which in
this instance would be 0x70) to maintain adherence to
the Intel data sheet specifications and real observed behavior.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1408643079-30675-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22 11:39:39 +01:00
Fam Zheng
8007429a99 block: Rename qemu_aio_release -> qemu_aio_unref
Suggested-by: Benoît Canet <benoit.canet@irqsave.net>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22 11:39:17 +01:00
Fam Zheng
e551c999bc ide: Convert trim_aiocb_info.cancel to .cancel_async
We know that either bh is scheduled or ide_issue_trim_cb will be called
again, so we just set i, j and ret to the right values. In both cases,
ide_trim_bh_cb will be called.

Also forward the cancellation to the iocb->aiocb which we get from
bdrv_aio_discard.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22 11:39:16 +01:00
Fam Zheng
0d910cfeaf ide/ahci: Check for -ECANCELED in aio callbacks
Before, bdrv_aio_cancel will either complete the request (like normal)
and call CB with an actual return code, or skip calling the request (for
example when the IO req is not submitted by thread pool yet).

We will change bdrv_aio_cancel to do it differently: always call CB
before return, with either [1] a normal req completion ret code, or [2]
ret == -ECANCELED. So the callers' callback must accept both cases. The
existing logic works with case [1], but not [2].

The simplest transition of callback code is do nothing in case [2], just
as if the CB is not called by the bdrv_aio_cancel() call.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22 11:38:55 +01:00
John Snow
d735b620b5 ide/atapi: Mark non-data commands as complete
When the command completion code in IDE and AHCI
was unified to put all command completion inside
of a callback, "cmd_done," we neglected to
ensure that all AHCI/ATAPI command paths would
eventually register as finished. for the PCI
interface to IDE this is not a problem because
cmd_done is a nop, but the AHCI implementation
needs to send a D2H_REG_FIS and interrupt back
to the guest to inform of completion.

This patch adds calls to ide_stop_transfer,
which calls ide_cmd_done, inside of
ide_atapi_cmd_ok and ide_atapi_cmd_error.

This fixes regressions observed by trying to boot QEMU
with a Fedora 20 live CD under Q35/AHCI, which uses
ATAPI command 0x00, which is a status check that may
cause a hang because we never complete, and ATAPI
command 0x56, which is unsupported by our current
implementation and results in an error that we never
report back to the guest.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-22 11:38:44 +01:00
Benoît Canet
5366d0c8bc block: Make the block accounting functions operate on BlockAcctStats
This is the next step for decoupling block accounting functions from
BlockDriverState.
In a future commit the BlockAcctStats structure will be moved from
BlockDriverState to the device models structures.

Note that bdrv_get_stats was introduced so device models can retrieve the
BlockAcctStats structure of a BlockDriverState without being aware of it's
layout.
This function should go away when BlockAcctStats will be embedded in the device
models structures.

CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Keith Busch <keith.busch@intel.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Michael Tokarev <mjt@tls.msk.ru>
CC: John Snow <jsnow@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Alexander Graf <agraf@suse.de>
CC: Max Reitz <mreitz@redhat.com>

Signed-off-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-10 10:41:29 +02:00
Benoît Canet
28298fd3d9 block: rename BlockAcctType members to start with BLOCK_ instead of BDRV_
The middle term goal is to move the BlockAcctStats structure in the device models.
(Capturing I/O accounting statistics in the device models is good for billing)
This patch make a small step in this direction by removing a reference to BDRV.

CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Keith Busch <keith.busch@intel.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Markus Armbruster <armbru@redhat.com>
CC: Alexander Graf <agraf@suse.de>i

Signed-off-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-10 10:41:29 +02:00
Valentin Manea
1a7044bb62 IDE: MMIO IDE device control should be little endian
Set the IDE MMIO memory type to little endian. The ATA specs identify
words part of the control commands encoded as little endian.
While this has no impact on little endian systems, it's required for big
endian systems(eg OpenRisc).

Signed-off-by: Valentin Manea <valentin.manea@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-10 10:41:29 +02:00
Markus Armbruster
7ca9b7c035 xen: Drop redundant bdrv_close() from pci_piix3_xen_ide_unplug()
drive_del() closes just fine.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-10 10:41:29 +02:00
John Snow
01ce352e62 ide: Add resize callback to ide/core
Currently, if the block device backing the IDE drive is resized,
the information about the device as cached inside of the IDEState
structure is not updated, thus when a guest OS re-queries the drive,
it is unable to see the expanded size.

This patch adds a resize callback that updates the IDENTIFY data
buffer in order to correct this.

Lastly, a Linux guest as-is cannot resize a libata drive while in-use,
but it can see the expanded size as part of a bus rescan event.
This patch also allows guests such as Linux to see the new drive size
after a soft reboot event, without having to exit the QEMU process.

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-08 11:12:44 +01:00
John Snow
4bf6637d35 IDE: Fill the IDENTIFY request consistently
IDE-HD, IDE-ATAPI and IDE-CFATA all fill the
identify buffer in slightly different ways,
this is a relatively minor patch to make them
uniform, to emphasize that:

(1) We build the s->identify_data cache first, then
(2) We copy it to s->io_buffer to fulfill the request.

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-08 11:12:44 +01:00
John Snow
c5fe97e359 ide: Add wwn support to IDE-ATAPI drive
Although it is possible to specify the wwn
property for cdrom devices on the command line,
the underlying driver fails to relay this information
to the guest operating system via IDENTIFY.

This is a simple patch to correct that.

See ATA8-ACS, Table 22 parts 5, 6, and 9.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-08 11:12:44 +01:00
Markus Armbruster
28fa7133b8 ide: Fix bootindex for bus_id > 9
We identify devices by their Open Firmware device paths.  The encoding
of bus numbers is incorrect: idebus_get_fw_dev_path() formats them in
decimal, while SeaBIOS uses hexadecimal.  With bus number > 9, SeaBIOS
will miss the bootindex (lucky case), or apply it to another device
(unlucky case).

Bug can't bite right now: ich9-ahci has six ports, and the sysbus-ahci
created by Calxeda Highbank has just one.

Fix it anyway, by changing %d to %x.

I couldn't find an Open Firmware spec covering this.  For what it's
worth, OVMF agrees with SeaBIOS.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-29 10:46:57 +01:00
Peter Maydell
a6aebb38ba SCSI patches include bug fixes from Fam and Peter, improved error
reporting from Fam and a fix for DPRINTF bitrot.  Memory patches try
 again to initialize name from the QOM name.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJT/zhXAAoJEBvWZb6bTYby/UMP/jyhrHAaCgPgrvM4bXzMXBoZ
 l4UQXSTAmhlpr/OUI9pgT/392IGNTkDZ3mJi0sqgG6p6egWUT6a4+lzJjlhExTJy
 K5GRkbgfj83nVI1Jr0uxs58dwM527IFc5RD2Fzz0QXJIMA+HDseLfSYfa3gxbdTU
 iU8fK4PG1usb8FMR+Rd7SzGgGbGhgs6KOar98izH9C+SsPtCIGEu86KW9EkCh2dZ
 t7RI9PAJZUA1Ci2GuFISAuxl08ZkfKo29fXfM0DsovbaQda2dph7j1y6sYqXYQBA
 jZW0BEedpC1PfbWEODU81PG5t4AH5AUNmrNIsG04NiDwcRzWQckA5/x6qHsdA/33
 N/GGzqfmLknvIPecuzmwmgRBVMzf+K0xXd+StSFJWR9dwP09Y0UfhdkuBsiqdd1a
 H+xtsDyBl9pR9VgqtetIq8uQf3fpiHSRUnh++YYU8V/uK2C8ZyTmYYBJNwk2FK6l
 2PBTD1Jsl0WYCZBScM0IK+BnDNDwrygdfAa2CF1KcfNHQSiHvjHIQwsVo6Lwev7i
 1eE6/0zQ7Yumi3LOSyUx3v6JwdKH1zsN3uIjlrg4SxpmgzK/vhwrtuJti4W7HpLd
 eHLHfszCWAmNO6zx0/bH44lPZNDBBFZeaZ+NVjW0nv7y3pAeLP3qyuY3pUsr+Suh
 0xRPwhfmoSz9CZ+5mAIX
 =iLTP
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

SCSI patches include bug fixes from Fam and Peter, improved error
reporting from Fam and a fix for DPRINTF bitrot.  Memory patches try
again to initialize name from the QOM name.

# gpg: Signature made Thu 28 Aug 2014 15:10:31 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg:                 aka "Paolo Bonzini <bonzini@gnu.org>"

* remotes/bonzini/tags/for-upstream:
  memory: Lazy init name from QOM name as needed
  xen: hvm: Abstract away memory region name ref
  xen-hvm: Constify string
  virtio-scsi: Report error if num_queues is 0 or too large
  scsi-generic: remove superfluous DPRINTF avoid to break compiling
  block/iscsi: fix memory corruption on iscsi resize
  scsi-bus: Convert DeviceClass init to realize
  block: Pass errp in blkconf_geometry

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-28 17:08:13 +01:00
Fam Zheng
5ff5efb46c block: Pass errp in blkconf_geometry
This allows us to pass error information to caller.

Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-26 13:20:44 +02:00
Markus Armbruster
d4df3dbc02 block: Drop some superfluous casts from void *
They clutter the code.  Unfortunately, I can't figure out how to make
Coccinelle drop all of them, so I have to settle for common special
cases:

    @@
    type T;
    T *pt;
    void *pv;
    @@
    - pt = (T *)pv;
    + pt = pv;
    @@
    type T;
    @@
    - (T *)
      (\(g_malloc\|g_malloc0\|g_realloc\|g_new\|g_new0\|g_renew\|
	 g_try_malloc\|g_try_malloc0\|g_try_realloc\|
	 g_try_new\|g_try_new0\|g_try_renew\)(...))

Topped off with minor manual style cleanups.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20 11:51:28 +02:00
Markus Armbruster
5839e53bbc block: Use g_new() & friends where that makes obvious sense
g_new(T, n) is neater than g_malloc(sizeof(T) * n).  It's also safer,
for two reasons.  One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.

Patch created with Coccinelle, with two manual changes on top:

* Add const to bdrv_iterate_format() to keep the types straight

* Convert the allocation in bdrv_drop_intermediate(), which Coccinelle
  inexplicably misses

Coccinelle semantic patch:

    @@
    type T;
    @@
    -g_malloc(sizeof(T))
    +g_new(T, 1)
    @@
    type T;
    @@
    -g_try_malloc(sizeof(T))
    +g_try_new(T, 1)
    @@
    type T;
    @@
    -g_malloc0(sizeof(T))
    +g_new0(T, 1)
    @@
    type T;
    @@
    -g_try_malloc0(sizeof(T))
    +g_try_new0(T, 1)
    @@
    type T;
    expression n;
    @@
    -g_malloc(sizeof(T) * (n))
    +g_new(T, n)
    @@
    type T;
    expression n;
    @@
    -g_try_malloc(sizeof(T) * (n))
    +g_try_new(T, n)
    @@
    type T;
    expression n;
    @@
    -g_malloc0(sizeof(T) * (n))
    +g_new0(T, n)
    @@
    type T;
    expression n;
    @@
    -g_try_malloc0(sizeof(T) * (n))
    +g_try_new0(T, n)
    @@
    type T;
    expression p, n;
    @@
    -g_realloc(p, sizeof(T) * (n))
    +g_renew(T, p, n)
    @@
    type T;
    expression p, n;
    @@
    -g_try_realloc(p, sizeof(T) * (n))
    +g_try_renew(T, p, n)

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20 11:51:28 +02:00
Peter Maydell
0e4a773705 SCSI changes that enable sending vendor-specific commands via virtio-scsi.
Memory changes for QOMification and automatic tracking of MR lifetime.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJT8et9AAoJEBvWZb6bTYbyIJAQAI3AlLSe27xWoUGfQUgWH30z
 Rt/pShHz3BJMfQpD79JfTH8u6uBpkQmKtflerNT7FhXN9ULDzNq+b/jRtke8nkuy
 ctCt05FhhK00rfWpUoRue4XiCuvbizBU7MK0DI3yCyNdXQyYnFvgnvsJtlqox8Zh
 J5HZcBJEmdCiWBxq7UPk0qBitp4PqNoy7jlD/Ex3m7fJN5WK2cyspQIT9zmhehVn
 B8Nwp+RitDDbXbwm0r18col5rFr/6Nj6+dW1gr+7sVJDLNsmJEqC2l3Kgk0wbPkG
 Uqwbih29me9PC9/L1VLGHY0ApKDQ8JGE0GrYgEg162hbhoxEHkjjoHMhDUfV6Pj8
 NkqcjjWl11UUhgkNqrGafayXbBVnOiEglxy8uXCeq14y9Xd/gjK9Fz6MQvRSOjms
 PFmaKknhdmpxh0DuZmTix7WBmKim8zOiCE0/vrAPvwx5L+d1bn5xh6yQvtVjBMpU
 Sru3Mhdm9bL9dUDBgOM/G6WCxSTVLBlExOblcYkQh03MfabD7bfplcrKYPXt5ull
 Y8YLjqkoIfoy5t0ErvtlpdBJjeEz99JXU+wLQ6NYHnzwzTV+oUtSaEph14mAFOcY
 XkFKdoPDI9PnyEfvy4193du8z/dSbhu7sWgHWbTCQyrcaNnSaVhlH43NUC+p23YN
 8vfEsVLd1X7MFkDBUmWp
 =M+/m
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

SCSI changes that enable sending vendor-specific commands via virtio-scsi.

Memory changes for QOMification and automatic tracking of MR lifetime.

# gpg: Signature made Mon 18 Aug 2014 13:03:09 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg:                 aka "Paolo Bonzini <bonzini@gnu.org>"

* remotes/bonzini/tags/for-upstream:
  mtree: remove write-only field
  memory: Use canonical path component as the name
  memory: Use memory_region_name for name access
  memory: constify memory_region_name
  exec: Abstract away ref to memory region names
  loader: Abstract away ref to memory region names
  tpm_tis: remove instance_finalize callback
  memory: remove memory_region_destroy
  memory: convert memory_region_destroy to object_unparent
  ioport: split deletion and destruction
  nic: do not destroy memory regions in cleanup functions
  vga: do not dynamically allocate chain4_alias
  sysbus: remove unused function sysbus_del_io
  qom: object: move unparenting to the child property's release callback
  qom: object: delete properties before calling instance_finalize
  virtio-scsi: implement parse_cdb
  scsi-block, scsi-generic: implement parse_cdb
  scsi-block: extract scsi_block_is_passthrough
  scsi-bus: introduce parse_cdb in SCSIDeviceClass and SCSIBusInfo
  scsi-bus: prepare scsi_req_new for introduction of parse_cdb

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-19 13:00:57 +01:00
Paolo Bonzini
469b046ead memory: remove memory_region_destroy
The function is empty after the previous patch, so remove it.

Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-18 12:06:21 +02:00
Michael Tokarev
d66168ed68 ide: only constrain read/write requests to drive size, not other types
Commit 58ac321135 introduced a check to ide dma processing which
constrains all requests to drive size.  However, apparently, some
valid requests (like TRIM) does not fit in this constraint, and
fails in 2.1.  So check the range only for reads and writes.

Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:14 +01:00
Kevin Wolf
f7f3ff1da0 ide: Fix segfault when flushing a device that doesn't exist
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:13 +01:00
Mark Cave-Ayland
271dddd133 cmd646: synchronise UDMA interrupt status with DMA interrupt status
Make sure that both registers are synchronised when being accessed through
PCI configuration space.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:13 +01:00
Mark Cave-Ayland
1d113ef874 cmd646: allow MRDMODE interrupt status bits clearing from PCI config space
Make sure that we also update the normal DMA interrupt status bits at the
same time, and alter the IRQ if being cleared accordingly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:13 +01:00
Mark Cave-Ayland
dab91a1e13 cmd646: switch cmd646_update_irq() to accept PCIDevice instead of PCIIDEState
This is in preparation for adding configuration space accessors which accept
PCIDevice as a parameter.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:13 +01:00
Mark Cave-Ayland
5bbc0a703d cmd646: synchronise DMA interrupt status with UDMA interrupt status
Make sure that the standard DMA interrupt status bits reflect any changes made
to the UDMA interrupt status bits. The CMD646U2 datasheet claims that these
bits are equivalent, and they must be synchronised for guests that manipulate
both registers.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:13 +01:00
Mark Cave-Ayland
58f16a7b47 cmd646: add constants for CNTRL register access
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:13 +01:00
Paolo Bonzini
088415202b ahci: construct PIO Setup FIS for PIO commands
PIO commands should put a PIO Setup FIS in the receive area when data
transfer ends.  Currently QEMU does not do this and only places the
D2H FIS at the end of the operation.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Paolo Bonzini
c7e73adb48 ide: make all commands go through cmd_done
AHCI has code to fill in the D2H FIS trigger the IRQ all over the place.
Centralize this in a single cmd_done callback by generalizing the existing
async_cmd_done callback.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Paolo Bonzini
08ee9e3368 ide: stop PIO transfer on errors
This will provide a hook for sending the result of the command via the
FIS receive area.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Paolo Bonzini
1f88f77348 ahci: remove duplicate PORT_IRQ_* constants
These are defined twice, just use one set consistently.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Paolo Bonzini
fd648f10af ide: move retry constants out of BM_STATUS_* namespace
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Paolo Bonzini
7e2648df86 ide: move BM_STATUS bits to pci.[ch]
They are not used by AHCI, and should not be even available there.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Paolo Bonzini
0e7ce54cf5 ide: fold add_status callback into set_inactive
It is now called only after the set_inactive callback.  Put the two together.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Paolo Bonzini
0def37baf9 ide: remove wrong setting of BM_STATUS_INT
Similar to the case removed in commit 69c38b8 (ide/core: Remove explicit
setting of BM_STATUS_INT, 2011-05-19), the only remaining use of
add_status(..., BM_STATUS_INT) is for short PRDs.  The flag should
not be raised in this case.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Paolo Bonzini
4855b57639 ide: wrap start_dma callback
Make it optional and prepare for the next patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Paolo Bonzini
446351236b ide: simplify start_transfer callbacks
Drop the unused return value and make the callback optional.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Paolo Bonzini
c039cb1e5a ide: simplify async_cmd_done callbacks
Drop the unused return value.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Paolo Bonzini
829b933b70 ide: simplify set_inactive callbacks
Drop the unused return value and make the callback optional.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Paolo Bonzini
1374bec063 ide: simplify reset callbacks
Drop the unused return value and make the callback optional.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Paolo Bonzini
69f72a2221 ide: stash aiocb for flushes
This ensures that operations are completed after a reset

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Markus Armbruster
58ac321135 ide: Treat read/write beyond end as invalid
The block layer fails such reads and writes just fine.  However, they
then get treated like valid operations that fail: the error action
gets executed.  Unwanted; reporting the error to the guest is the only
sensible action.

Reject them before passing them to the block layer.  This bypasses the
error action and I/O accounting.  Not quite correct for DMA, because
DMA can fail after some success, and when that happens, the part that
succeeded isn't counted.  Tolerable, because I/O accounting is an
inconsistent mess anyway.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-14 12:03:21 +02:00
Le Tan
5a18e67dfd ahci: map memory via device's address space instead of address_space_memory
In map_page() in hw/ide/ahci.c, replace cpu_physical_memory_map() and
cpu_physical_memory_unmap() with dma_memory_map() and dma_memory_unmap(),
because ahci devices should not access memory directly but via their address
space. Add an AddressSpace parameter to map_page(). In order to call
map_page(), we should pass the AHCIState.as as the AddressSpace argument.

Signed-off-by: Le Tan <tamlokveer@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-07 10:22:43 +02:00
Reza Jelveh
d02f8adc6d ahci.c: mask unused flags when reading size PRDT DBC
The data byte count(DBC) read from the description information is defined for
bits 21:00. Bits 30:22 are reserved and bit 31 is the Interrupt on Completion
(I) flag.

Completion interrupts are triggered after every transaction instead of on
I-flag in QEMU. tbl_entry_size is a signed integer and improperly reading the
DBC leads to a negative offset that causes sglist allocation to fail.

Signed-off-by: Reza Jelveh <reza.jelveh@tuhh.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-07 09:15:29 +02:00
Andreas Färber
f3c7d0389f hw: Fix qemu_allocate_irqs() leaks
Replace qemu_allocate_irqs(foo, bar, 1)[0]
with qemu_allocate_irq(foo, bar, 0).

This avoids leaking the dereferenced qemu_irq *.

Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[PC Changes:
 * Applied change to instance in sh4/sh7750.c
]
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Kirill Batuzov <batuzovk@ispras.ru>
[AF: Fix IRQ index in sh4/sh7750.c]
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-06-30 21:13:30 +02:00
Wenchao Xia
a589569f2f qapi: adjust existing defines
In order to let event defines use existing types later, instead of
redefine new ones, some old type defines for spice and vnc are changed,
and BlockErrorAction is moved from block.h to qapi schema. Note that
BlockErrorAction is not merged with BlockdevOnError.

At this point, VncInfo is not made a child of VncBasicInfo, because
VncBasicInfo has mandatory fields where VncInfo makes them optional.

Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:01:25 -04:00
Peter Maydell
af44da87e9 Patch queue for ppc - 2014-06-16
This pull request brings a lot of fun things. Among others we have
 
   - e500: u-boot firmware support
   - sPAPR: magic page enablement
   - sPAPR: add "compat" CPU option to support older guests
   - sPAPR: refactorings in preparation for VFIO
   - POWER8 live migration
   - mac99: expose bus frequency
   - little endian core dump, gdb and disas support
   - new ppc64le-linux-user target
   - DFP emulation
   - bug fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJTntTgAAoJECszeR4D/txgvNoP/R9HooeweYnZYQxuTTxCIyPZ
 if1KRWj6S3jaZ74RwY7kjqYiBUKzNhqpA068v1QS/8ETjPc44V5RMKVOYoGeLNZz
 DiZ+BGIp6OSAW3zILFejdi2h7H86qESu7ZFSHZli7eUVg58JUVcnsrFrqMo5ojhY
 ICDbeDTitHkBESx7d93bUpecA535433FFylX1ueSj4FFeIpdhlCQsSZbal4FhxqY
 74ra4phwAfHlh28K286ZCduLKih77V5dZlroT89apI2eammD+jvXeewvmYtflcQu
 j/0FScSVOAplf0wqlPYM0+JAqbaX9o8ZLfzrMV+80ODdDKSFyGKeMo/PrOKJPtpk
 EibFNt67nJ30yGhmVsylsQxHVsmWFumcomA0kDdGLmj4A6mqLWM/7w3PGB1pJTPS
 bMvMz6O3B/ebk3wXZaMklcjLCLxCBqdYDG0/h7d+gpBLwqnF1Qgi4vv7g+MeKWtf
 Z5qJvUMzaAK6LJbDqOIqYhLCtvv2eYHNqvvjkaSRD5SkRzWnzzmmB+3xfjkLllbM
 C9DmcQVL4mh7SL3ELjcX7NT4rC+TWRu/el1eAreMjZT8pUyAbjyOkNGbLMqthaM7
 kzrSPc9QMzLmIJPrbH9unCuTf9NP5cUndtCL3kEAkl3FPm4kqiwVvh2WSeYCa0uw
 1PvTu0HNT/5NcvOkq/5L
 =hi5L
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging

Patch queue for ppc - 2014-06-16

This pull request brings a lot of fun things. Among others we have

  - e500: u-boot firmware support
  - sPAPR: magic page enablement
  - sPAPR: add "compat" CPU option to support older guests
  - sPAPR: refactorings in preparation for VFIO
  - POWER8 live migration
  - mac99: expose bus frequency
  - little endian core dump, gdb and disas support
  - new ppc64le-linux-user target
  - DFP emulation
  - bug fixes

# gpg: Signature made Mon 16 Jun 2014 12:28:32 BST using RSA key ID 03FEDC60
# gpg: Can't check signature: public key not found

* remotes/agraf/tags/signed-ppc-for-upstream: (156 commits)
  spapr_pci: Advertise MSI quota
  PPC: KVM: Make pv hcall endian agnostic
  powerpc: use float64 for frsqrte
  spapr: Add kvm-type property
  spapr: Create SPAPRMachine struct
  linux-user: Tell guest about big host page sizes
  spapr_hcall: Add address-translation-mode-on-interrupt resource in H_SET_MODE
  spapr_hcall: Split h_set_mode()
  target-ppc: Enable DABRX SPR and limit it to <=POWER7
  target-ppc: Enable PPR and VRSAVE SPRs migration
  target-ppc: Add POWER8's Event Based Branch (EBB) control SPRs
  KVM: target-ppc: Enable TM state migration
  target-ppc: Add POWER8's TM SPRs
  target-ppc: Add POWER8's MMCR2/MMCRS SPRs
  target-ppc: Enable FSCR facility check for TAR
  target-ppc: Add POWER8's FSCR SPR
  target-ppc: Add POWER8's TIR SPR
  target-ppc: Refactor class init for POWER7/8
  target-ppc: Switch POWER7/8 classes to use correct PMU SPRs
  target-ppc: Make use of gen_spr_power5p_lpar() for POWER7/8
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-16 18:26:21 +01:00
Peter Maydell
84219c5a21 Block pull request
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTntNuAAoJEJykq7OBq3PIjqYH/3R7hbHyYltew/3q761kF2F3
 xc/52bDji4AA89mYFvBtQfWvD8m+ndCYDjtXhN5C17VJUrPkNKfSZ1/BQBn0vvGk
 DlHd2PUvEe+9mZRVdXQRFuNRmngtIBaLuCNCDyCOsqVjxZSHGH3KBapApyKRj6Dr
 +I33F5v+3lcs66JDOfJeY1BmHkK2ng4FehQEWHqPIl0oiXhEWF6f5DbQ9z13a2TI
 1YC9CrcsI0XjzcE/glqRo6udp/bGXPO9h1q2e2RLs7GUmSULR/TJsIE3X56MdZpE
 Xz/gHpGeirrbrBkJeV2j45OAuZ/7w6JucFNL7zRG3OhiTy+BkDBBHq9qKbLFc20=
 =7gES
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Block pull request

# gpg: Signature made Mon 16 Jun 2014 12:22:22 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/block-pull-request: (39 commits)
  QemuOpts: cleanup tmp 'allocated' member from QemuOptsList
  cleanup QEMUOptionParameter
  vpc.c: replace QEMUOptionParameter with QemuOpts
  vmdk.c: replace QEMUOptionParameter with QemuOpts
  vhdx.c: replace QEMUOptionParameter with QemuOpts
  vdi.c: replace QEMUOptionParameter with QemuOpts
  ssh.c: replace QEMUOptionParameter with QemuOpts
  sheepdog.c: replace QEMUOptionParameter with QemuOpts
  rbd.c: replace QEMUOptionParameter with QemuOpts
  raw_bsd.c: replace QEMUOptionParameter with QemuOpts
  raw-win32.c: replace QEMUOptionParameter with QemuOpts
  raw-posix.c: replace QEMUOptionParameter with QemuOpts
  qed.c: replace QEMUOptionParameter with QemuOpts
  qcow2.c: replace QEMUOptionParameter with QemuOpts
  QemuOpts: export qemu_opt_find
  qcow.c: replace QEMUOptionParameter with QemuOpts
  nfs.c: replace QEMUOptionParameter with QemuOpts
  iscsi.c: replace QEMUOptionParameter with QemuOpts
  gluster.c: replace QEMUOptionParameter with QemuOpts
  cow.c: replace QEMUOptionParameter with QemuOpts
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-16 12:27:47 +01:00
Alexander Graf
3e300fa6ad macio ide: Do remainder access asynchronously
The macio IDE controller has some pretty nasty magic in its implementation to
allow for unaligned sector accesses. We used to handle these accesses
synchronously inside the IO callback handler.

However, the block infrastructure changed below our feet and now it's impossible
to call a synchronous block read/write from the aio callback handler of a
previous block access.

Work around that limitation by making the unaligned handling bits also go
through our asynchronous handler.

This fixes booting Mac OS X for me.

Reported-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:38 +02:00
Mark Cave-Ayland
85720d3667 macio: handle non-block ATAPI DMA transfers
Currently the macio DMA routines assume that all DMA requests are for read/write
block transfers. This is not always the case for ATAPI, for example when
requesting a TOC where the response is generated directly in the IDE buffer.

Detect these non-block ATAPI DMA transfers (where no lba is specified in the
command) and copy the results directly into RAM as indicated by the DBDMA
descriptor. This fixes CDROM access under MorphOS.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:36 +02:00
Markus Armbruster
ae60e8e378 blockdev: Remove unused DriveInfo reference count
It's always one since commit fa510eb dropped the last drive_get_ref().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16 17:23:19 +08:00
Juan Quintela
d49805aeea savevm: Remove all the unneeded version_minimum_id_old (x86)
After previous Peter patch, they are redundant.  This way we don't
assign them except when needed.  Once there, there were lots of case
where the ".fields" indentation was wrong:

     .fields = (VMStateField []) {
and
     .fields =      (VMStateField []) {

Change all the combinations to:

     .fields = (VMStateField[]){

The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-16 04:55:26 +02:00
Juan Quintela
35d08458a9 savevm: Remove all the unneeded version_minimum_id_old (rest)
After previous Peter patch, they are redundant.  This way we don't
assign them except when needed.  Once there, there were lots of case
where the ".fields" indentation was wrong:

     .fields = (VMStateField []) {
and
     .fields =      (VMStateField []) {

Change all the combinations to:

     .fields = (VMStateField[]){

The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-14 15:24:51 +02:00
Michael S. Tsirkin
ae2158ad6c ahci: fix buffer overrun on invalid state load
CVE-2013-4526

Within hw/ide/ahci.c, VARRAY refers to ports which is also loaded.  So
we use the old version of ports to read the array but then allow any
value for ports.  This can cause the code to overflow.

There's no reason to migrate ports - it never changes.
So just make sure it matches.

Reported-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-05-05 22:15:02 +02:00
Peter Maydell
ee25595f01 hw/ide/ahci.c: Avoid shift left into sign bit
Add U suffix to avoid shifting left into the sign bit, which
is undefined behaviour.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-04-18 10:33:36 +04:00
Benoît Canet
940973ae0b ide: Correct improper smart self test counter reset in ide core.
The SMART self test counter was incorrectly being reset to zero,
not 1. This had the effect that on every 21st SMART EXECUTE OFFLINE:
 * We would write off the beginning of a dynamically allocated buffer
 * We forgot the SMART history
Fix this.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Message-id: 1397336390-24664-1-git-send-email-benoit.canet@irqsave.net
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Acked-by: Kevin Wolf <kwolf@redhat.com>
[PMM: tweaked commit message as per suggestions from Markus]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-04-14 13:23:53 +01:00
Stefan Weil
06ab66cfab hw/ide: Add missing 'static' attributes
This fixes a warning from the static code analysis (smatch).

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-03-27 19:22:48 +04:00
Rob Herring
bd16430777 ahci: fix sysbus support
Non-PCI AHCI support is broken due to assertion failures when trying
to convert AHCIState to a PCIDevice pointer as AHCIState can have
different container structs. Fix this by using the non-asserting object
cast and checking the returned pointer is not NULL.

The AddressSpace pointer is also being initialized to NULL and causing
dma_memory_map call to fail. Fix this by initializing to
address_space_memory for sysbus instances.

Also correct AHCI_VMSTATE to use the correct container SysbusAHCIState
for sysbus instances.

Signed-off-by: Rob Herring <rob.herring@linaro.org>
Message-id: 1392073373-3295-1-git-send-email-robherring2@gmail.com
[PMM: added linebreaks to fix overlong lines]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-18 19:36:13 +00:00
Peter Maydell
2c02f88780 hw/ide/ahci.h: Avoid shifting left into sign bit
Add 'U' suffixes to avoid undefined behaviour shifting left into
the signed bit of a signed integer type. Clang's sanitizer will
warn about this:

 hw/ide/ahci.c:1210:27: runtime error: left shift of 1 by 31 places cannot be represented in type 'int'

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-07 11:29:21 +01:00
Stefano Stabellini
15e8159e76 Call pci_piix3_xen_ide_unplug from unplug_disks
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-20 17:28:08 +00:00
Peter Maydell
61e8a92364 QOM infrastructure fixes and device conversions
* QTest cleanups and test cases for PCI NICs
 * NAND fix for "info qtree"
 * Cleanup and extension of QOM machine tests
 * IndustryPack test cases and conversion to QOM realize
 * I2C cleanups
 * Cleanups of legacy qdev properties
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTAooJAAoJEPou0S0+fgE/SuQQALW3zvra4ZLRAQV0e8kFoyj1
 vVtmLkDhnCe4cYfxxfOX91NA0rH1ts2EO1+UcnaCHJlptNWfA+8qJW69XgYpHE3c
 DKQlKPL/9pV5ywY5uUw/t1UJHg2BfrLBDDM4lP+vrpwiQYq4kp24JffnhfY3l9MA
 9qdkXu1HrlWoLRVGnMyGDXI8cb+5bTL+FEc6UuHl3P89/gj5BV+LDWn0QOFbAkxq
 4wk+Xh6sHKcfOdq6vMCNGlTjlJnpbY43D1a8+q6hFGG8JBlpne7Oer7bse9k4uTK
 q/CzyNzC0lnjjcULpa4ptRlycH0ruD9DPY7Lco9XqYd3l/c9742PmTEqN5TZseKD
 XD7+hwT1tk7W8rihm8KETCP6sKlXz4w8tJiWe6IT3zwRzvXIolxxK93heQuaX73Z
 HFDmvTPVLUiWF8ftKTyWZM3w+jsbSH0QSrMCIHKJrPTRWTKphx0DUP74lWjNsvGs
 FFBjpAgrflLihxiuRrcLmekGn0xCTjhQWIo2GoiWTgLSEHNQQQUNO+15/kcU/vlI
 hh3DJpiBKeSnUapHHL0OEK6ryeHoG95akiRjImwWVthNLk4KEuWtlhFPYBtulO5A
 PA02trE4Ah769effX0ZYdNl23KbW4VxpZ8VZv+kp7RTrDKxw551HoEFJ5ja0nkvB
 O1CfsE7x0GH/Rbi/Hxhu
 =KRcc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging

QOM infrastructure fixes and device conversions

* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties

# gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-devices-for-peter: (49 commits)
  qtest: Include system headers before user headers
  qapi: Refine human printing of sizes
  qdev: Use QAPI type names for properties
  qdev: Add enum property types to QAPI schema
  block: Handle "rechs" and "large" translation options
  qdev: Remove hex8/32/64 property types
  qdev: Remove most legacy printers
  qdev: Use human mode in "info qtree"
  qapi: Add human mode to StringOutputVisitor
  qdev: Inline qdev_prop_parse()
  qdev: Legacy properties are just strings
  qdev: Legacy properties are now read-only
  qdev: Remove legacy parsers for hex8/32/64
  qdev: Sizes are now parsed by StringInputVisitor
  qapi: Add size parser to StringInputVisitor
  qtest: Don't segfault with invalid -qtest option
  ipack: Move IndustryPack out of hw/char/
  ipoctal232: QOM parent field cleanup
  ipack: QOM parent field cleanup for IPackDevice
  ipack: QOM parent field cleanup for IPackBus
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-20 13:05:48 +00:00
Paolo Bonzini
c7bcc85d66 qdev: Remove hex8/32/64 property types
Replace them with uint8/32/64.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14 21:12:04 +01:00
Igor Mammedov
2897ae0267 qdev:pci: refactor PCIDevice to use generic "hotpluggable" property
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use
generic DeviceClass.hotpluggable field instead.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10 10:26:56 +02:00
Peter Maydell
0706f7c85b trivial-patches for 2014-01-16
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iJwEAAECAAYFAlLYFuEACgkQUlPFrXTwyDjuGAQAqa23FDOF4VLnNNAkL37Aje3V
 CyroMi1Dj3WcKcbD8mEZOgZV5B/W5h6+v11JJdTkCTdOuiXYM3O+y4l3jxGhxcS2
 yxzCOMP5NrM7D1WogeFogbjabTq1Lm83FLXCgPCWi2rDIhPLQ6RPaMNNPyDdHHih
 aSuZo8EfnJOUcephR0I=
 =HvPH
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mjt/tags/trivial-patches-2014-01-16' into staging

trivial-patches for 2014-01-16

# gpg: Signature made Thu 16 Jan 2014 17:29:05 GMT using RSA key ID 74F0C838
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: E190 8639 3B10 B51B AC2C  8B73 5253 C5AD 74F0 C838

Message-id: 1389893719-16336-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-30 13:56:00 +00:00
Paolo Bonzini
1b7fd72955 block: rename buffer_alignment to guest_block_size
The alignment field is now set to the value that is promised to the
guest, rather than required by the host.  The next patches will make
QEMU aware of the host-provided values, so make this clear.

The alignment is also not about memory buffers, but about the sectors on
the disk, change the documentation of the field.

At this point, the field is set by the device emulation, but completely
ignored by the block layer.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24 17:40:01 +01:00
David du Colombier
850484a295 ide: cmd_exec_dev_diagnostic() always set error register to 0x01
This notably fix IDE CD probing on the Plan 9 operating system,
which rely on the error register set by the Execute Device
Diagnostic command to detect drive configurations.

Thanks to Rémi Pommarel for reporting this issue.

Signed-off-by: David du Colombier <0intro@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-01-15 23:34:17 +04:00
Markus Armbruster
04916ee9fb vt82c686: Clean up use of cannot_instantiate_with_device_add_yet
A VT82C686B southbridge has multiple functions.  We model each
function as a separate qdev.  One of them need some special wiring set
up in mips_fulong2e_init() to work: the ISA bridge at 05.0.

The IDE controller at 05.1 (via-ide) has always had
cannot_instantiate_with_device_add_yet set, but there is no obvious
reason why device_add could not work for them.  Drop it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23 00:27:23 +01:00
Markus Armbruster
81aab2ff11 piix3 piix4: Clean up use of cannot_instantiate_with_device_add_yet
A PIIX3/PIIX4 southbridge has multiple functions.  We model each
function as a separate qdev.  Two of them need some special wiring set
up in pc_init1() or mips_malta_init() to work: the ISA bridge at 01.0,
and the SMBus controller at 01.3.

The IDE controller at 01.1 (piix3-ide, piix3-ide-xen, piix4-ide) has
always had cannot_instantiate_with_device_add_yet set, but there is no
obvious reason why device_add could not work for them.  Drop it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23 00:27:23 +01:00
Markus Armbruster
efec3dd631 qdev: Replace no_user by cannot_instantiate_with_device_add_yet
In an ideal world, machines can be built by wiring devices together
with configuration, not code.  Unfortunately, that's not the world we
live in right now.  We still have quite a few devices that need to be
wired up by code.  If you try to device_add such a device, it'll fail
in sometimes mysterious ways.  If you're lucky, you get an
unmysterious immediate crash.

To protect users from such badness, DeviceClass member no_user used to
make device models unavailable with -device / device_add, but that
regressed in commit 18b6dad.  The device model is still omitted from
help, but is available anyway.

Attempts to fix the regression have been rejected with the argument
that the purpose of no_user isn't clear, and it's prone to misuse.

This commit clarifies no_user's purpose.  Anthony suggested to rename
it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which
I shorten somewhat to keep checkpatch happy.  While there, make it
bool.

Every use of cannot_instantiate_with_device_add_yet gets a FIXME
comment asking for rationale.  The next few commits will clean them
all up, either by providing a rationale, or by getting rid of the use.

With that done, the regression fix is hopefully acceptable.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23 00:27:22 +01:00
Peter Maydell
d8ee2591e4 bswap.h: Remove cpu_to_be16wu()
Replace the legacy cpu_to_be16wu() with stw_be_p().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-7-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-05 19:57:47 -08:00
Andreas Färber
e3d4d36d1b ide: Drop ide_init2_with_non_qdev_drives()
All its users have finally been converted.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-05 18:06:52 +01:00
Andreas Färber
a6cb20fcba microdrive: Coding Style cleanups
Add missing braces.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-05 18:06:52 +01:00
Andreas Färber
d1f2c96a81 pcmcia: QOM'ify PCMCIACardState and MicroDriveState
Turn PCMCIACardState into a device.
Move callbacks to new PCMCIACardClass.

Derive TYPE_MICRODRIVE from TYPE_PCMCIA_CARD.
Replace ide_init2_with_non_qdev_drives().

Signed-off-by: Othmar Pasteka <pasteka@kabsi.at>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-05 18:06:52 +01:00
Anthony Liguori
a126050a10 Block patches for 1.7.0-rc0 (v2)
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJScnrnAAoJEH8JsnLIjy/WhhsP/2No1yEGNzfhw0WLDsEGBJI7
 zjG+QkRMO4q2t256SxNr84KBFJlYKBvGrx+W8xC66AdvR1feL5hmWdXAMTJovx6Z
 3Qt59RI9iISZ2OEtc9FhdsC+dSdM/3qie17XuuSCqifsi4xLjIZK/s18+RnLa0t/
 nRObYP4prRl0c3o1gKaUvNz2wkIqctQAIe8UQkn6R1vPC6D60m/H9dDj4Kj68HO0
 ICsF4AXBR/V2a8gU36/PGexBVyfgC4HOeuN0qNSTgYOKxLuNR+SrlzzhHE+jZTs5
 GASm3vg/vUgBOO1759X5T8hveO6yu8XL82l+/d5nIK4gYGORIQZT74dyV5JgQIlF
 Y47d0cF28+C/fuL1jh7c+2HY5WmmJQosMi9CaCBj0lvH0k5caEjqwPeHtRBmEyu3
 1wAcLQJowZrWB5ez9MjezsaL4sPCymvB/4F443xdz5V19mE41bLZGW2EIT7MXHY7
 IcwLU/opx76GMOFfWVMA7jeQkjiPaqGeaQHJzdnGUzIthqyiTigQMfi5P3nXGDic
 uQi+KrqP9lNpJlZk4xGQnFovHNmKZrnLhUvqOIPk7/wKMvlU6ewdzp5Fnwzqw4MW
 uJ/6eBJYolMyY+q37AH3Q6ZUkwTJi9O1drCPA0Ogr/dJiCyAiOoKuL0N74VabpcD
 AahXw+yYV0qh6H4YjOzW
 =wGCx
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'kwolf/tags/for-anthony' into staging

Block patches for 1.7.0-rc0 (v2)

# gpg: Signature made Thu 31 Oct 2013 04:44:39 PM CET using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found

* kwolf/tags/for-anthony: (30 commits)
  vmdk: Implment bdrv_get_specific_info
  qapi: Add optional field 'compressed' to ImageInfo
  qemu-iotests: prefill some data to test image
  sheepdog: check simultaneous create in resend_aioreq
  sheepdog: cancel aio requests if possible
  sheepdog: make add_aio_request and send_aioreq void functions
  sheepdog: try to reconnect to sheepdog after network error
  coroutine: add co_aio_sleep_ns() to allow sleep in block drivers
  sheepdog: reload inode outside of resend_aioreq
  sheepdog: handle vdi objects in resend_aio_req
  sheepdog: check return values of qemu_co_recv/send correctly
  qemu-iotests: Test case for backing file deletion
  qemu-iotests: drop duplicated "create_image"
  qemu-iotests: Fix 051 reference output
  block: Avoid unecessary drv->bdrv_getlength() calls
  block: Disable BDRV_O_COPY_ON_READ for the backing file
  ahci: fix win7 hang on boot
  sheepdog: pass copy_policy in the request
  sheepdog: explicitly set copies as type uint8_t
  block: Don't copy backing file name on error
  ...

Message-id: 1383064269-27720-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-31 17:02:26 +01:00
Anthony Liguori
b0eb759fb2 pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
 - pci master abort support by Marcel
 - pci IRQ API rework by Marcel
 - acpi generation support by myself
 
 Everything has gone through several revisions, latest versions have been on
 list for a while without any more comments, tested by several
 people.
 
 Please pull for 1.7.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
 X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
 34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
 rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
 /iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
 2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
 =CVfs
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pci, pc, acpi fixes, enhancements

This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself

Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.

Please pull for 1.7.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

* mst/tags/for_anthony: (39 commits)
  ssdt-proc: update generated file
  ssdt: fix PBLK length
  i386: ACPI table generation code from seabios
  pc: use new api to add builtin tables
  acpi: add interface to access user-installed tables
  hpet: add API to find it
  pvpanic: add API to access io port
  ich9: APIs for pc guest info
  piix: APIs for pc guest info
  acpi/piix: add macros for acpi property names
  i386: define pc guest info
  loader: allow adding ROMs in done callbacks
  i386: add bios linker/loader
  loader: use file path size from fw_cfg.h
  acpi: ssdt pcihp: updat generated file
  acpi: pre-compiled ASL files
  acpi: add rules to compile ASL source
  i386: add ACPI table files from seabios
  q35: expose mmcfg size as a property
  q35: use macro for MCFG property name
  ...

Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-31 16:58:32 +01:00
Alexander Graf
8464b273d6 ahci: fix win7 hang on boot
When AHCI executes an asynchronous IDE command, it checked DRDY without
checking either DRQ or BSY.  This sometimes caused interrupt to be sent
before command is actually completed.

This resulted in a race condition: if guest then managed to access the
device before command has completed, it would hang waiting for an
interrupt.
This was observed with windows 7 guests.

To fix, check for DRQ or BSY in additiona to DRDY, if set,
the command is asynchronous so delay the interrupt until
asynchronous done callback is invoked.

Reported-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-29 13:06:39 +01:00
Marcel Apfelbaum
9e64f8a3fc hw: set interrupts using pci irq wrappers
pci_set_irq and the other pci irq wrappers use
PCI_INTERRUPT_PIN config register to compute device
INTx pin to assert/deassert.

An irq is allocated using pci_allocate_irq wrapper
only if is needed by non pci devices.

Removed irq related fields from state if not used anymore.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14 17:11:45 +03:00
Michael S. Tsirkin
13164591f3 ahci: set ahci mode on reset
ATM we set AHCI mode on 1st GHC write.
Spec says we should set it on reset.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-10-11 16:49:59 +02:00
Andreas Färber
fb17dfe057 qdev: Pass size to qbus_create_inplace()
To be passed to object_initialize().

Since commit 39355c3826 the argument is
void*, so drop some superfluous (BusState *) casts or direct parent
field usages.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 21:15:35 +02:00
Andreas Färber
c6baf942e0 ide: Pass size to ide_bus_new()
To be passed to qbus_create_inplace().

Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 20:14:39 +02:00
Alex Bligh
bc72ad6754 aio / timers: Switch entire codebase to the new timer API
This is an autogenerated patch using scripts/switch-timer-api.

Switch the entire code base to using the new timer API.

Note this patch may introduce some line length issues.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Andreas Färber
f6c11d5644 ide: Introduce abstract QOM type for PCIIDEState
Needed for QOM casts.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 20:41:49 +02:00
Peter Crosthwaite
02a9594b4f ide/piix: QOM casting sweep
Use standard QOM cast macro. Remove usage of DO_UPCAST() and
direct -> style upcasting.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29 20:41:42 +02:00
Marcel Apfelbaum
125ee0ed9c devices: Associate devices to their logical category
The category will be used to sort the devices displayed in
the command line help.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:09 -05:00
Stefan Weil
04dd125942 PPC: dbdma: macio: Fix format specifiers (build regression)
Fix a number of warnings for 32 bit builds (tested on MingW and Linux):

  CC    hw/ide/macio.o
qemu/hw/ide/macio.c: In function 'pmac_ide_atapi_transfer_cb':
qemu/hw/ide/macio.c:134:9: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'hwaddr' [-Werror=format]
qemu/hw/ide/macio.c: In function 'pmac_ide_transfer_cb':
qemu/hw/ide/macio.c:215:5: error: format '%ld' expects argument of type 'long int', but argument 5 has type 'int64_t' [-Werror=format]
qemu/hw/ide/macio.c:222:9: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'hwaddr' [-Werror=format]
qemu/hw/ide/macio.c:264:9: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'hwaddr' [-Werror=format]
cc1: all warnings being treated as errors
make: *** [hw/ide/macio.o] Error 1

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-27 11:22:54 +04:00