This patch enable us to know exit reason of KVM_RUN. It will help us
know where the trouble is caused.
Signed-off-by: Kazuya Saito <saito.kazuya@jp.fujitsu.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds tracepoints at ioctl to kvm. Tracing these ioctl is
useful for clarification whether the cause of troubles is qemu or kvm.
Signed-off-by: Kazuya Saito <saito.kazuya@jp.fujitsu.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes the following error:
In file included from qemu/include/trace.h:4:0,
from trace/generated-events.c:3:
./trace/generated-tracers.h: In function ‘trace_pvscsi_get_sg_list’:
./trace/generated-tracers.h:4271:9: error: format ‘%lu’ expects argument of
type ‘long unsigned int’, but argument 4 has type ‘size_t’ [-Werror=format]
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Report the supported speeds for device and port in the error message.
Also add the speeds to the tracepoint. And while being at it drop
the redundant error message in usb_desc_attach, usb_device_attach will
report the error anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
[ Rename files to vmw_pvscsi, fix setting of hostStatus in
pvscsi_request_cancelled - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reimplement usb-host on top of libusb.
Reasons to do this:
(1) Largely rewritten from scratch, nice opportunity to kill historical
cruft.
(2) Offload usbfs handling to libusb.
(3) Have a single portable code base instead of bsd + linux variants.
(4) Bring usb-host support to any platform supported by libusbx.
For now this goes side-by-side to the existing code. That is only to
simplify regression testing though, at the end of the day I want remove
the old code and support libusb exclusively. Merge early in 1.5 cycle,
remove the old code after 1.5 release or something like this.
Thanks to qdev the old and new code can coexist nicely on linux. Just
use "-device usb-host-linux" to use the old linux driver instead of the
libusb one (which takes over the "usb-host" name).
The bsd driver isn't qdev'ified so it isn't that easy for bsd.
I didn't bother making it runtime switchable, so you have to rebuild
qemu with --disable-libusb to get back the old code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Check for port reset first and skip everything else then.
Add sanity checks for PLS updates.
Add PLC notification when entering PLS_U0 state.
This gets host-initiated port resume going on win8.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make gui update rate adaption code in gui_update() actually work.
Sprinkle in a tracepoint so you can see the code at work. Remove
the update rate adaption code in vnc and make vnc simply use the
generic bits instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hardcode depth to 32 bpp. It effectively was that way before because
that is the default surface depth, this just makes it explicit in the
code.
Rename depth to new_depth to make it consistent with the new_width +
new_height names. In theory we can make new_depth changeable (i.e.
allow the guest to fill in -- say -- 16 there). In practice the guests
don't try, the X-Server refuses to start if you ask it to use 16bpp
depth (via DefaultDepth in the Screen section).
Always return the correct rmask+gmask+bmask values for the given
new_depth.
Fix mode setting to also verify at new_depth to make sure we have a
correct DisplaySurface, even if the current video mode happes to be
16bpp (set by vgabios via bochs vbe interface). While being at it
switch over to use qemu_create_displaysurface_from, so the surface is
backed by guest-visible video memory and we save a memcpy.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
# By Kevin Wolf (22) and Peter Lieven (1)
# Via Stefan Hajnoczi
* stefanha/block: (23 commits)
block: Fix direct use of protocols as driver for bdrv_open()
qcow2: Gather clusters in a looping loop
qcow2: Move cluster gathering to a non-looping loop
qcow2: Allow requests with multiple l2metas
qcow2: Use byte granularity in qcow2_alloc_cluster_offset()
qcow2: Prepare handle_alloc/copied() for byte granularity
qcow2: handle_copied(): Implement non-zero host_offset
qcow2: handle_copied(): Get rid of keep_clusters parameter
qcow2: handle_copied(): Get rid of nb_clusters parameter
qcow2: Factor out handle_copied()
qcow2: Clean up handle_alloc()
qcow2: Finalise interface of handle_alloc()
qcow2: handle_alloc(): Get rid of keep_clusters parameter
qcow2: handle_alloc(): Get rid of nb_clusters parameter
qcow2: Factor out handle_alloc()
qcow2: Decouple cluster allocation from cluster reuse code
qcow2: Change handle_dependency to byte granularity
qcow2: Improve check for overlapping allocations
qcow2: Handle dependencies earlier
qcow2: Remove bogus unlock of s->lock
...
This patch enables us to know RunState transition. It will be userful
for investigation when the trouble occured in special event such like
live migration, shutdown, suspend, and so on.
Signed-off-by: Kazuya Saito <saito.kazuya@jp.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Decouple DisplaySurface allocation & deallocation from DisplayState.
Replace dpy_gfx_resize + dpy_gfx_setdata with a dpy_gfx_replace_surface
function.
This handles the graphic hardware emulation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split callbacks into separate Ops struct. Pass DisplayChangeListener
pointer as first argument to all callbacks. Uninline a bunch of
display functions and move them from console.h to console.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move global variables into a struct so multiple thread pools can be
supported in the future.
This patch does not change thread-pool.h interfaces. There is still a
global thread pool and it is not yet possible to create/destroy
individual thread pools. Moving the variables into a struct first makes
later patches easier to review.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This patch allows to specify multiple directories where qemu should look
for data files. To implement that the behavior of the -L switch is
slightly different now: Instead of replacing the data directory the
path specified will be appended to the data directory list. So when
specifiying -L multiple times all directories specified will be checked,
in the order they are specified on the command line, instead of just the
last one.
Additionally the default paths are always appended to the directory
data list. This allows to specify a incomplete directory (such as the
seabios out/ directory) via -L. Anything not found there will be loaded
from the default paths, so you don't have to create a symlink farm for
all the rom blobs.
For trouble-shooting a tracepoint has been added, logging which blob
has been loaded from which location.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1362739344-8068-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add streams support to the xhci emulation. No secondary streams yet,
only linear stream arays are supported for now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new virtio transport that uses channel commands to perform
virtio operations.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Provide a mechanism for qemu to provide fully virtual subchannels to
the guest.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Provide handlers for (most) channel I/O instructions.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Yet another optimization is to extend the mirroring iteration to include more
adjacent dirty blocks. This limits the number of I/O operations and makes
mirroring efficient even with a small granularity. Most of the infrastructure
is already in place; we only need to put a loop around the computation of
the origin and sector count of the iteration.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With AIO support in place, we can start copying more than one chunk
in parallel. This patch introduces the required infrastructure for
this: the buffer is split into multiple granularity-sized chunks,
and there is a free list to access them.
Because of copy-on-write, a single operation may already require
multiple chunks to be available on the free list.
In addition, two different iterations on the HBitmap may want to
copy the same cluster. We avoid this by keeping a bitmap of in-flight
I/O operations, and blocking until the previous iteration completes.
This should be a pretty rare occurrence, though; as long as there is
no overlap the next iteration can start before the previous one finishes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is really no change in the behavior of the job here, since
there is still a maximum of one in-flight I/O operation between
the source and the target. However, this patch already introduces
the AIO callbacks (which are unmodified in the next patch)
and some of the logic to count in-flight operations and only
complete the job when there is none.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When mirroring runs, the backing files for the target may not yet be
ready. However, this means that a copy-on-write operation on the target
would fill the missing sectors with zeros. Copy-on-write only happens
if the granularity of the dirty bitmap is smaller than the cluster size
(and only for clusters that are allocated in the source after the job
has started copying). So far, the granularity was fixed to 1MB; to avoid
the problem we detected the situation and required the backing files to
be available in that case only.
However, we want to lower the granularity for efficiency, so we need
a better solution. The solution is to always copy a whole cluster the
first time it is touched. The code keeps a bitmap of clusters that
have already been allocated by the mirroring job, and only does "manual"
copy-on-write if the chunk being copied is zero in the bitmap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This actually uses the dirty bitmap in the block layer, and converts
mirroring to use an HBitmapIter.
Reviewed-by: Laszlo Ersek <lersek@redhat.com> (except block/mirror.c parts)
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
HBitmaps provides an array of bits. The bits are stored as usual in an
array of unsigned longs, but HBitmap is also optimized to provide fast
iteration over set bits; going from one bit to the next is O(logB n)
worst case, with B = sizeof(long) * CHAR_BIT: the result is low enough
that the number of levels is in fact fixed.
In order to do this, it stacks multiple bitmaps with progressively coarser
granularity; in all levels except the last, bit N is set iff the N-th
unsigned long is nonzero in the immediately next level. When iteration
completes on the last level it can examine the 2nd-last level to quickly
skip entire words, and even do so recursively to skip blocks of 64 words or
powers thereof (32 on 32-bit machines).
Given an index in the bitmap, it can be split in group of bits like
this (for the 64-bit case):
bits 0-57 => word in the last bitmap | bits 58-63 => bit in the word
bits 0-51 => word in the 2nd-last bitmap | bits 52-57 => bit in the word
bits 0-45 => word in the 3rd-last bitmap | bits 46-51 => bit in the word
So it is easy to move up simply by shifting the index right by
log2(BITS_PER_LONG) bits. To move down, you shift the index left
similarly, and add the word index within the group. Iteration uses
ffs (find first set bit) to find the next word to examine; this
operation can be done in constant time in most current architectures.
Setting or clearing a range of m bits on all levels, the work to perform
is O(m + m/W + m/W^2 + ...), which is O(m) like on a regular bitmap.
When iterating on a bitmap, each bit (on any level) is only visited
once. Hence, The total cost of visiting a bitmap with m bits in it is
the number of bits that are set in all bitmaps. Unless the bitmap is
extremely sparse, this is also O(m + m/W + m/W^2 + ...), so the amortized
cost of advancing from one bit to the next is usually constant.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Many callers pass size_t, which gets silently truncated to uint32_t.
Harmless, because all practical sizes are well below 4GiB. Clean it
up anyway. Size overflow now fails assertions.
Bonus: saves a whole bunch of silly casts.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
virtio-blk-data-plane is a subset implementation of virtio-blk. It only
handles read, write, and flush requests. It does this using a dedicated
thread that executes an epoll(2)-based event loop and processes I/O
using Linux AIO.
This approach performs very well but can be used for raw image files
only. The number of IOPS achieved has been reported to be several times
higher than the existing virtio-blk implementation.
Eventually it should be possible to unify virtio-blk-data-plane with the
main body of QEMU code once the block layer and hardware emulation is
able to run outside the global mutex.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-blk-data-plane cannot access memory using the usual QEMU
functions since it executes outside the global mutex and the memory APIs
are this time are not thread-safe.
This patch introduces a virtqueue module based on the kernel's vhost
vring code. The trick is that we map guest memory ahead of time and
access it cheaply outside the global mutex.
Once the hardware emulation code can execute outside the global mutex it
will be possible to drop this code.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a new spice chardev to allow arbitrary communication between the
host and the Spice client via the spice server.
Examples:
This allows the Spice client to have a special port for the qemu
monitor:
... -chardev spiceport,name=org.qemu.monitor,id=monitorport
-mon chardev=monitorport
v2:
- remove support for chardev to chardev linking
- conditionnaly compile with SPICE_SERVER_VERSION
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds tracing / debugging calls to the XICS interrupt controller
implementation used on the pseries machine.
Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have separate status and length fields in USBPacket
update the completion tracepoint to log both.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Starting with commit 1c380f9460 dma
transfers can actually fail. This patch makes ehci keep track
of the busmaster bit in pci config space, by setting/clearing the
dma_context pointer. Attempts to dma without context will result
in raising HSE (Host System Error) interrupt and stopping the host
controller.
This patch fixes WinXP not booting with a usb stick attached to ehci.
Root cause is seabios activating ehci so you can boot from the stick,
and WinXP clearing the busmaster bit before resetting the host
controller, leading to ehci actually trying dma while it is disabled.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* kraxel/usb.69: (31 commits)
usb-redir: Allow redirecting super speed devices to high speed controllers
usb-redir: Allow to attach USB 2.0 devices to 1.1 host controller
usb-redir: Use reject rather the disconnect on bad ep info
usb-redir: Add an usbredir_setup_usb_eps() helper function
usb-redir: Add support for input pipelining
usb-redir: Add support for 32 bits bulk packet length
combined-packet: Add a workaround for Linux usbfs + live migration
usb: Add packet combining functions
uhci: Don't crash on device disconnect
uhci: Add a uhci_handle_td_error() helper function
usb/ehci-pci: add helper to create ich9 usb controllers
usb/ehci-pci: add ich9 00:1a.* variant
usb/ehci-pci: dynamic type generation
uhci: add ich9 00:1a.* variants
uhci: stick irq routing info into UHCIInfo too.
uhci: dynamic type generation
xilinx_zynq: add USB controllers
usb/ehci: add sysbus variant
usb/ehci: split into multiple source files
usb/ehci: Guard definition of EHCI_DEBUG
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a generic thread-pool. The code is roughly based on posix-aio-compat.c,
with some changes, especially the following:
- use QemuSemaphore instead of QemuCond;
- separate the state of the thread from the return code of the worker
function. The return code is totally opaque for the thread pool;
- do not busy wait when doing cancellation.
A more generic threadpool (but still specific to I/O so that in the future
it can use special scheduling classes or PI mutexes) can have many uses:
it allows more flexibility in raw-posix.c and can more easily be extended
to Win32, and it will also be used to do an msync of the persistent bitmap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* kraxel/usb.68: (36 commits)
xhci: fix usb name in caps
xhci: make number of interrupters and slots configurable
xhci: allow disabling interrupters
xhci: flush endpoint context unconditinally
xhci: fix function name in error message
uhci: Use only one queue for ctrl endpoints
uhci: Retry to fill the queue while waiting for td completion
uhci: Always mark a queue valid when we encounter it
uhci: When the guest marks a pending td non-active, cancel the queue
uhci: Detect guest td re-use
uhci: Verify queue has not been changed by guest
uhci: Immediately free queues on device disconnect
uhci: Store ep in UHCIQueue
uhci: Make uhci_fill_queue() actually operate on an UHCIQueue
uhci: Add uhci_read_td() helper function
uhci: Rename UHCIAsync->td to UHCIAsync->td_addr
uhci: Move emptying of the queue's asyncs' queue to uhci_queue_free
uhci: Drop unnecessary forward declaration of some static functions
uhci: Don't retry on error
uhci: cleanup: Add an unlink call to uhci_async_cancel()
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
