Spotted by Coverity with preview checker ALLOC_FREE_MISMATCH enabled
and my "coverity: Model g_free() isn't necessarily free()" model patch
applied.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When see usb codes, find there are redundant brackets !((udev->port->speedmask
& USB_SPEED_MASK_SUPER)) here. So delete it.
Signed-off-by: Jun Li <junmuzi@gmail.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
usb_ep_get and usb_handle_packet can deal with a NULL device, but we have
to avoid dereferencing NULL pointers when building the id.
Thanks to Gonglei for an initial stab at fixing this.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
commit 50dcc0f8 (uhci: tracing support) had removed
DPRINTF, the DEBUG marco is useless now, remove it.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
streams support in usb-redir and usb-host works only with recent enough
versions of the support libraries (libusbredir and libusbx). Failure
mode is rather unelegant: Any stream usb transfers will throw stall
errors. Turning off support for streams in the xhci host controller
will work better as the guest can figure beforehand that streams are
not going to work.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=8BaC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Mon 20 Oct 2014 13:04:09 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (28 commits)
block: Make device model's references to BlockBackend strong
block: Lift device model API into BlockBackend
blockdev: Convert qmp_eject(), qmp_change_blockdev() to BlockBackend
block/qapi: Convert qmp_query_block() to BlockBackend
blockdev: Fix blockdev-add not to create DriveInfo
blockdev: Drop superfluous DriveInfo member id
pc87312: Drop unused members of PC87312State
ide: Complete conversion from BlockDriverState to BlockBackend
hw: Convert from BlockDriverState to BlockBackend, mostly
virtio-blk: Rename VirtIOBlkConf variables to conf
virtio-blk: Drop redundant VirtIOBlock member conf
block: Rename BlockDriverCompletionFunc to BlockCompletionFunc
block: Rename BlockDriverAIOCB* to BlockAIOCB*
block: Eliminate DriveInfo member bdrv, use blk_by_legacy_dinfo()
block: Merge BlockBackend and BlockDriverState name spaces
block: Eliminate BlockDriverState member device_name[]
block: Eliminate bdrv_iterate(), use bdrv_next()
blockdev: Eliminate drive_del()
block: Make BlockBackend own its BlockDriverState
block: Code motion to get rid of stubs/blockdev.c
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Device models should access their block backends only through the
block-backend.h API. Convert them, and drop direct includes of
inappropriate headers.
Just four uses of BlockDriverState are left:
* The Xen paravirtual block device backend (xen_disk.c) opens images
itself when set up via xenbus, bypassing blockdev.c. I figure it
should go through qmp_blockdev_add() instead.
* Device model "usb-storage" prompts for keys. No other device model
does, and this one probably shouldn't do it, either.
* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
which has only the BlockDriverState.
* PC87312State has an unused BlockDriverState[] member.
The next two commits take care of the latter two.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The patch is big, but all it really does is replacing
dinfo->bdrv
by
blk_bs(blk_by_legacy_dinfo(dinfo))
The replacement is repetitive, but the conversion of device models to
BlockBackend is imminent, and will shorten it to just
blk_legacy_dinfo(dinfo).
Line wrapping muddies the waters a bit. I also omit tests whether
dinfo->bdrv is null, because it never is.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
by making bootindex a writable qom property.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=utUi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kraxel/tags/pull-bootindex-20141015-1' into staging
allow changing bootorder via monitor at runtime,
by making bootindex a writable qom property.
* remotes/kraxel/tags/pull-bootindex-20141015-1: (34 commits)
bootindex: change fprintf to error_report
bootindex: delete bootindex when device is removed
bootindex: move calling add_boot_device_patch to bootindex setter function
ide: add calling add_boot_device_patch in bootindex setter function
nvma: ide: add bootindex to qom property
usb-storage: add bootindex to qom property
virtio-blk: alias bootindex property explicitly for virt-blk-pci/ccw/s390
block: remove bootindex property from qdev to qom
virtio-blk: add bootindex to qom property
ide: add bootindex to qom property
scsi: add bootindex to qom property
isa-fdc: remove bootindexA/B property from qdev to qom
redirect: remove bootindex property from qdev to qom
vfio: remove bootindex property from qdev to qom
pci-assign: remove bootindex property from qdev to qom
host-libusb: remove bootindex property from qdev to qom
virtio-net: alias bootindex property explicitly for virt-net-pci/ccw/s390
net: remove bootindex property from qdev to qom
usb-net: add bootindex to qom property
vmxnet3: add bootindex to qom property
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On this way, we can assure the new bootindex take effect
during vm rebooting.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Because usb-storage rely on scsi-disk which is created
in usb_msg_realize_storage(), so we should store the SCSIDevice
pointer in MSDState struct. Only in this way, we can change
the global boot_order_list when we want to change the bootindex
during vm rebooting by calling object_property_set_int(Object(SCSIDevice),).
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Drop useless hack that disables hotplug on bus, after backend
storage was added to it, by setting "allow_hotplug = 0". Even
if bus is hotpluggable, it won't be possible to add another
SCSI device to bus since its realize will fail early with
error "no free target" in scsi_qdev_realize() method.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Drop useless hack that disables hotplug on bus by setting
"allow_hotplug = 0". Even if bus is hotpluggable, It won't
be possible to add another SCSI device to bus since its
realization will fail early with error "no free target"
in scsi_qdev_realize() method.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
usb-bot creates SCSI bus and immediately makes it
non hotpluggable which was making not possible to
hotplug usb-bot since QEMU would abort at
bus_add_child(scsi-hd) time when usb-bot is
realized.
Mark usb-bot as not hotpluggable so that attempt
to hotplug it would error out even before it gets
to device initialization point.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This exceeded the trace argument limit for LTTNG UST and wasn't really
needed as the flags value is stored anyway. Dropping this fixes the
compile failure for UST. It can probably be merged with the previous
trace shortening patch.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Recent traces rework introduced 2 tracepoints with 13 and 20
arguments. When dtrace backend is selected
(--enable-trace-backend=dtrace), compile fails as
sys/sdt.h defines DTRACE_PROBE up to DTRACE_PROBE12 only.
This splits long tracepoints.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a flag to EHCIPCIInfo saying whenever the controller supports
companions or not. Make sure we only allow registering companions for
ehci versions supporting that. Enable pci hotplug for the ehci
variants not supporting companions.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
uhci hostadapters in companion setups can't be hotplugged. So leave
hotplug disabled for all ich9 variants (which are already tagged with
unplug = true in the info struct). For the other variants we'll enable
hotplug and remove the companion setup properties.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Whatever the chardev is open or not, we should assure
the speed is matched each other. So, call usb_check_attach()
check speed. And then pass &error_abort at all calls to
usb_device_attach().
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In this way, we can check speed directly, don't need
call usb_device_attach(), which has other conditions,
such as checking the chardev is open.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All usb-bus devices are realized by realize(),
remove init callback function from USBDeviceClass struct.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In this way, all the implementations now use
error_setg instead of qerror_report for reporting error.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In this way, all the implementations now use
error_setg instead of error_report for reporting error.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In this way, all the implementations now use
error_setg instead of error_report for reporting error.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In this way, all the implementations now use
error_setg instead of error_report for reporting error.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In this way, all the implementations now use
error_setg instead of error_report for reporting error.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
