Now that get_temp_tl is used for get_src[12], we don't need to
pre-allocate these temporaries.
Fallout from this is moving some assignments around cas/casx to
avoid uninitialized variable warnings.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All users of gen_movl_{reg_TN,TN_reg} are removed. At the same time,
make cpu_val a local variable for load/store disassembly.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Push the DisasContext down so that we can use gen_load/store_gpr
in sode gen_ldda_asi, gen_stda_ast, gen_cas_asi, gen_casx_asi.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This means we can avoid the incoming temporary, though the cleanup
of the existing temporaries is not performed in this patch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Only handle the easy cases directly within disas_sparc_insn.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Infrastructure to be used to clean up handling of temporaries.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
It is used nowhere else, and the corresponding MAX_CODE_GEN_BUFFER_SIZE
also lives there.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We had a hack for arm and sparc, allocating code_gen_prologue to a
special section. Which, honestly does no good under certain cases.
We've already got limits on code_gen_buffer_size to ensure that all
TBs can use direct branches between themselves; reuse this limit to
ensure the prologue is also reachable.
As a bonus, we get to avoid marking a page of the main executable's
data segment as executable.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The hard-coded addresses inside alloc_code_gen_buffer only make sense
if we're building an executable that will actually run at the address
we've put into the linker scripts.
When we're building with -fpie, the executable will run at some
random location chosen by the kernel. We get better placement for
the code_gen_buffer if we allow the kernel to place the memory,
as it will tend to to place it near the executable, based on the
PROT_EXEC bit.
Since code_gen_prologue is always inside the executable, this effect
is easily seen at the end of most TB, with the exit_tb opcode, and
with any calls to helper functions.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
For ARM we cap the buffer size to 16MB. Do not allocate 32MB in that case.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
It now consists of:
A macro definition of MAX_CODE_GEN_BUFFER_SIZE with host-specific values,
A function size_code_gen_buffer that applies most of the reasoning for
choosing a buffer size,
Three variations of a function alloc_code_gen_buffer that contain all
of the logic for allocating executable memory via a given allocation
mechanism.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This should help us to:
- More easily add or remove machine initialization arguments without
having to change every single machine init function;
- More easily make mechanical changes involving the machine init
functions in the future;
- Let machine initialization forward the init arguments to other
functions more easily.
This change was half-mechanical process: first the struct was added with
the local ram_size, boot_device, kernel_*, initrd_*, and cpu_model local
variable initialization to all functions. Then the compiler helped me
locate the local variables that are unused, so they could be removed.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds a mmio bar to the qemu standard vga which allows to
access the standard vga registers and bochs dispi interface registers
via mmio.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This broke when the tests were moved from tests/ to tests/tcg/.
On x86_64 host/i386-linux-user non-kvm guest, test-i386 and test-mmap are broken, but at least they build.
To build/run the tests:
$ cd $BUILD_PATH/tests/tcg
$ SRC_PATH=path/to/qemu make <target>
Signed-off-by: Catalin Patulea <catalinp@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There's no reason to require configure to run before running a clean
target, so check MAKECMDGOALS before.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
commit c28ae41 introduced GETPC() usage for sparc, which is currently
not defined when building with --enable-tcg-interpreter. Add sparc to
the list of targets we selectively define GETPC() for.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Switch to my new work email address from which I am contributing.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We need to evaluate $libexecdir in configure, otherwise we literally end
up with "${prefix}/libexec" instead of the absolute path as
CONFIG_QEMU_HELPERDIR.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Update the -help output and documentation so that it recommends
'help' rather than '?' for the various "list valid values for this
option" cases. '?' is deprecated (as it can fail confusingly if
not quoted), so it's better to steer users towards 'help'. ('?'
still works, for backwards compatibility.)
This is the -help option part of the change otherwise done in
commit c8057f9, since we are now past release 1.2 and free to
change our help text without worrying about breaking libvirt.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* 'trivial-patches' of git://github.com/stefanha/qemu:
ui/vnc-jobs.c: Fix minor typos in comments
net/tap-win32: Fix compiler warning caused by missing include statement
configure: Remove unused parameters from main function
target-arm/neon_helper: Remove obsolete FIXME comment
targphys.h: Don't define target_phys_addr_t for user-mode emulators
ui/vnc: Only report/use TIGHT_PNG encoding if enabled.
Fixes a clone() emulation bug were the new thread starts
at the point of the syscall and thus clones in a loop.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Fix some minor typos/grammar errors in comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The include file for net_init_tap was missing:
net/tap-win32.c:703:
warning: no previous prototype for ‘net_init_tap’
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This modification is required if compiler option -Wunused-parameter is activated.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 33ebc29 fixed the bugs in the implementation of VQRSHL,
but forgot to remove the FIXME comment...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 4be403c accidentally defined the target_phys_addr_t type when
building user-mode emulators. Since the type doesn't really make
any sense except for system emulators, avoid defining it when building
in user mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If TIGHT_PNG is not enabled by the --enable-vnc-png configure flag
then do not report to the client that it is supported.
Also, since TIGHT_PNG is the same as the TIGHT encoding but with the
filter/copy replaced with PNG data, adding it to the supported
encodings list when it is disabled will cause the TIGHT encoding to be
used even though the client requested TIGHT_PNG.
Signed-off-by: Joel Martin <github@martintribe.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instructions that both use the RRX second operand and update CS were
incorrect, as the Carry flag was updated too early. An example of such an
instruction would be:
ands r12,r13,RRX
Ands, because of the "s" flag will update the carry flag. But the RRX second
operand rotates through the C flag which should happen before the update.
Fixed the ordering of the two, the old carry is read by "r13,RRX" before being
updated.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reported-by: Vinesh Peringat <vineshp@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Old code used !io_thread to know if a thread was an vcpu or not. That
fails when we introduce the iothread.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Make consistent the result of blk_mig_save_dirty_block() and
mig_save_device_dirty()
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This means we don't need to pass through qemu_file to get the errors.
Adjust all callers.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Move the error check to the beggining of the callers. Once this is fixed
qemu_file_set_if_error() is not used anymore, so remove it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
It was setting last_error directly once, and with the helper the other time.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
It was used only one, and was only one if. It makes error handling
saner.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Adjust all the callers. We moved the set of last_error from inside
qemu_fflush() to all the callers.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
