Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of
TYPE_PCI_DEVICE, except:
1) The ones that already have INTERFACE_PCIE_DEVICE set:
* base-xhci
* e1000e
* nvme
* pvscsi
* vfio-pci
* virtio-pci
* vmxnet3
2) base-pci-bridge
Not all PCI bridges are Conventional PCI devices, so
INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes
that are actually Conventional PCI:
* dec-21154-p2p-bridge
* i82801b11-bridge
* pbm-bridge
* pci-bridge
The direct subtypes of base-pci-bridge not touched by this patch
are:
* xilinx-pcie-root: Already marked as PCIe-only.
* pcie-pci-bridge: Already marked as PCIe-only.
* pcie-port: all non-abstract subtypes of pcie-port are already
marked as PCIe-only devices.
3) megasas-base
Not all megasas devices are Conventional PCI devices, so the
interface names are added to the subclasses registered by
megasas_register_types(), according to information in the
megasas_devices[] array.
"megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add
INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas".
Acked-by: Alberto Garcia <berto@igalia.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some PPC SoCs have an EHCI with OHCI companion USB controller. To
emulate this allow the sysbus version of OHCI to be used as a companion.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Code that checks dstate is unaware of SystemTap and LTTng UST dstate, so
the following trace event will not fire when solely enabled by SystemTap
or LTTng UST:
if (trace_event_get_state(TRACE_MY_EVENT)) {
str = g_strdup_printf("Expensive string to generate ...",
...);
trace_my_event(str);
g_free(str);
}
Add trace_event_get_state_backends() to fetch backend dstate. Those
backends that use QEMU dstate fetch it as part of
generate_h_backend_dstate().
Update existing trace_event_get_state() callers to use
trace_event_get_state_backends() instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170731140718.22010-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The strict td link limit added by commit "95ed569 usb: ohci: limit the
number of link eds" causes problems with macos guests. Lets raise the
limit.
Reported-by: Programmingkid <programmingkidx@gmail.com>
Reported-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 1488876018-31576-1-git-send-email-kraxel@redhat.com
It should return 1 if an error occurs when reading td.
This will avoid an infinite loop issue in ohci_service_ed_list.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1487760990-115925-1-git-send-email-liqiang6-s@360.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The guest may builds an infinite loop with link eds. This patch
limit the number of linked ed to avoid this.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 5899a02e.45ca240a.6c373.93c1@mx.google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It should return 1 if an error occurs when reading iso td.
This will avoid an infinite loop issue in ohci_service_ed_list.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 5899ac3e.1033240a.944d5.9a2d@mx.google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The default DMA offset is set to 3. When the property is not set by
the consumer, the default causes DMA access to be shifted by 3
bytes. In PXA, this results in incorrect DMA access, leading to error
notification in the USB controller driver. A better default would be
0, so that there is no offset, when the consumer does not specify one.
Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: Deepak S. <deepak@zilogic.com>
Message-id: 1475060958-7760-1-git-send-email-vijaykumar@zilogic.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
muldiv64(a, 1, b) is like "a / b".
This patch is the result of coccinelle script
scripts/coccinelle/remove_muldiv64.cocci.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
muldiv64() is "uint64_t muldiv64(uint64_t a, uint32_t b, uint32_t c)"
Some time it is used as muldiv64(uint32_t a, uint64_t b, uint32_t c)"
This patch is the result of coccinelle script
scripts/coccinelle/swap_muldiv64.cocci to reorder arguments.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
QEMU currently crashes when an OHCI controller is instantiated with
too many ports, e.g. "-device pci-ohci,num-ports=100,masterbus=1".
Thus add a proper check in usb_ohci_init() to make sure that we
do not use more than OHCI_MAX_PORTS = 15 ports here.
Ticket: https://bugs.launchpad.net/qemu/+bug/1581308
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1463995387-11710-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then removed. This replacement improves the readability and
understandability of code.
For example,
timer_mod(fdctrl->result_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50));
NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns
matches the unit of the expression on the right side of the plus.
Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocate timer once, at init time, instead of allocating/freeing
it all the time when starting/stopping the bus. Simplifies the
code, also fixes bugs (memory leak) due to missing checks whenever
the time is already allocated or not.
Cc: Prasad J Pandit <pjp@fedoraproject.org>
Reported-by: Zuozhi Fzz <zuozhi.fzz@alibaba-inc.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-20-git-send-email-peter.maydell@linaro.org
On overcommitted CPU, kernel can be so slow that an interrupt can
be triggered by the device whereas the driver is not ready to receive
it. This drives us into an infinite loop.
On suspend, if a SOF interrupt is raised between the stop of the
device processing and the change of the device internal state to
OHCI_USB_SUSPEND (QEMU stops SOF timer on this state change), this
interrupt is never acknowledged.
This patch clears pending SOF interrupt on OHCI_USB_SUSPEND setting.
Some details:
- ohci_irq(): the OHCI interrupt handler, acknowledges the SOF IRQ
only if the state of the driver (rh_state) is OHCI_STATE_RUNNING.
So if this interrupt happens and the driver is not in this state,
the function is called again and again, moving the system to a
CPU starvation.
- ohci_rh_suspend(): the function stop the operation and acknowledge
pending interrupts (but doesn't disable it). Later in the function,
the device is moved to OHCI_SUSPEND_STATE, and the driver to
OHCI_RH_SUSPENDED. If between the moment when the interrupt is
acknowledged and the moment when the device is suspended a new
interrupt is raised, it will be never acknowledged because the
driver is now not in OHCI_RH_RUNNING state.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1452109525-32150-3-git-send-email-lvivier@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On overcommitted CPU, kernel can be so slow that an interrupt can
be triggered by the device whereas the driver is not ready to receive
it. This drives us into an infinite loop.
This does not happen on real hardware because real hardware never send
interrupt immediately after the controller has been moved to OPERATION state.
This patch tries to delay the first SOF interrupt to let driver exits from
the critical section (which is not protected against interrupts...)
Some details:
- ohci_irq(): the OHCI interrupt handler, acknowledges the SOF IRQ
only if the state of the driver (rh_state) is OHCI_STATE_RUNNING.
So if this interrupt happens and the driver is not in this state,
the function is called again and again, moving the system to a
CPU starvation.
- ohci_rh_resume(): the driver re-enables operation with OHCI_USB_OPER.
In QEMU this start the SOF timer and QEMU starts to send IRQs. As
the driver is not in OHCI_STATE_RUNNING and not protected against IRQ,
the ohci_irq() can be called and the driver never moved to
OHCI_STATE_RUNNING.
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1452109525-32150-2-git-send-email-lvivier@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Specification says that: "This bit is set by HCD to initiate a software reset of HC."
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1450567431-31795-4-git-send-email-hpoussin@reactos.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Specification says that, when entering this state, "the contents of the registers
(except Root Hub registers) are preserved by the HC. [...] The Root Hub is being reset,
which causes the Root Hub's downstream ports to be reset and possibly powered off."
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1450567431-31795-3-git-send-email-hpoussin@reactos.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We create optional sections with this patch. But we already have
optional subsections. Instead of having two mechanism that do the
same, we can just generalize it.
For subsections we just change:
- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
VMStateDescription
Signed-off-by: Juan Quintela <quintela@redhat.com>
When hot-unplugging the usb controllers (ehci/uhci),
we have to clean all resouce of these devices,
involved registered reset handler. Otherwise, it
may cause NULL pointer access and/or segmentation fault
if we reboot the guest os after hot-unplugging.
Let's hook up reset via DeviceClass->reset() and drop
the qemu_register_reset() call. Then Qemu will register
and unregister the reset handler automatically.
Ohci does't support hotplugging/hotunplugging yet, but
existing resource cleanup leak logic likes ehci/uhci.
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 457215ec "ohci: Use QOM realize for OHCI" converted only
"sysbus-ohci". Finish the job: convert "pci-ohci".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This loses the messages explaining the error printed with
error_printf_unless_qmp(). The next commit will make up for the loss.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This exceeded the trace argument limit for LTTNG UST and wasn't really
needed as the flags value is stored anyway. Dropping this fixes the
compile failure for UST. It can probably be merged with the previous
trace shortening patch.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Recent traces rework introduced 2 tracepoints with 13 and 20
arguments. When dtrace backend is selected
(--enable-trace-backend=dtrace), compile fails as
sys/sdt.h defines DTRACE_PROBE up to DTRACE_PROBE12 only.
This splits long tracepoints.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This converts many kinds of debug prints to traces.
This implements packets logging to avoid unnecessary calculations if
usb_ohci_td_pkt_short/usb_ohci_td_pkt_long is not enabled.
This makes OHCI errors (such as "DMA error") invisible by default.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There appears to be typo in OHCI with isochronous transfers
resulting in isoch. transfer descriptor state never being written back.
The'put_words' function is in a OR statement hence it is never called.
Signed-off-by: Jack Un <jack.un@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This adds migration support for OHCI.
This defines a descriptor for OHCIState.
This changes some OHCIState field types to be migration compatible.
This adds a descriptor for OHCIPort.
This migrates the EOF timer if the USB was started at the time of
migration.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add U suffix to avoid undefined behaviour. This is only
strictly necessary for the 1<<31 cases, but we add it for the
other constants in these groups for consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use
generic DeviceClass.hotpluggable field instead.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
/iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
=CVfs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony: (39 commits)
ssdt-proc: update generated file
ssdt: fix PBLK length
i386: ACPI table generation code from seabios
pc: use new api to add builtin tables
acpi: add interface to access user-installed tables
hpet: add API to find it
pvpanic: add API to access io port
ich9: APIs for pc guest info
piix: APIs for pc guest info
acpi/piix: add macros for acpi property names
i386: define pc guest info
loader: allow adding ROMs in done callbacks
i386: add bios linker/loader
loader: use file path size from fw_cfg.h
acpi: ssdt pcihp: updat generated file
acpi: pre-compiled ASL files
acpi: add rules to compile ASL source
i386: add ACPI table files from seabios
q35: expose mmcfg size as a property
q35: use macro for MCFG property name
...
Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
pci_set_irq and the other pci irq wrappers use
PCI_INTERRUPT_PIN config register to compute device
INTx pin to assert/deassert.
An irq is allocated using pci_allocate_irq wrapper
only if is needed by non pci devices.
Removed irq related fields from state if not used anymore.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Device communication errors need to be reported to driver.
Add a debug message while at it.
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>
Acked-by: Gerd Hoffmann <kraxel@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
To be passed to qbus_create_inplace().
Use DEVICE() cast to avoid a direct parent field access.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Current hcd-ohci does not handle DMA errors. However they may happen
so here we introduce simple error handling.
On such errors, a typical OHCI will stop operating, signal the guest
about the error by sending "UnrecoverableError Event", set itself into
error state and set "Detected Parity Error" in its PCI config space
to signal that it got an error and so does the patch.
This also adds ohci_die() call to ohci_bus_start() to handle possible
failure of qemu_new_timer_ns().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The category will be used to sort the devices displayed in
the command line help.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and avoid DO_UPCAST().
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[AF: Avoid remaining OHCIPCIState::pci_dev uses, rename parent fields]
Signed-off-by: Andreas Färber <afaerber@suse.de>
The DMAContext is a simple pointer to an AddressSpace that is now always
already available. Make everyone hold the address space directly,
and clean up the DMA API to use the AddressSpace directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds support for usb3 streams to the usb subsystem core.
This is just adding a streams field / parameter in a number of places.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
