Commit Graph

65553 Commits

Author SHA1 Message Date
Richard Henderson
ab638a328f target/arm: Implement the ARMv8.2-AA32HPD extension
The bulk of the work here, beyond base HPD, is defining the
TTBCR2 register.  In addition we must check TTBCR.T2E, which
is not present (RES0) for AArch64.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 14:41:24 +00:00
Richard Henderson
037c13c590 target/arm: Implement the ARMv8.1-HPD extension
Since the TCR_*.HPD bits were RES0 in ARMv8.0, we can simply
interpret the bits as if ARMv8.1-HPD is present without checking.
We will need a slightly different check for hpd for aarch32.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 14:41:24 +00:00
Richard Henderson
ea22747c63 target/arm: Tidy scr_write
Because EL3 has a fixed execution mode, we can properly decide
which of the bits are RES{0,1}.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 14:41:24 +00:00
Richard Henderson
619959c358 target/arm: Fix HCR_EL2.TGE check in arm_phys_excp_target_el
The enable for TGE has already occurred within arm_hcr_el2_amo
and friends.  Moreover, when E2H is also set, the sense is
supposed to be reversed, which has also already occurred within
the helpers.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 14:41:24 +00:00
Richard Henderson
99f8f86d36 target/arm: Add SCR_EL3 bits up to ARMv8.5
Post v8.4 bits taken from SysReg_v85_xml-00bet8.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 14:41:24 +00:00
Richard Henderson
099bf53b7a target/arm: Add HCR_EL2 bits up to ARMv8.5
Post v8.3 bits taken from SysReg_v85_xml-00bet8.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 14:41:24 +00:00
Peter Maydell
3dc91ddbc6 target/arm: Move id_aa64mmfr* to ARMISARegisters
At the same time, define the fields for these registers,
and use those defines in arm_pamax().

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181203203839.757-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: fixed up typo (s/achf/ahcf/) belatedly spotted by RTH]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 14:40:56 +00:00
Edgar E. Iglesias
f6ef171db8 hw/arm: versal: Correct the nr of IRQs to 192
Correct the nr of IRQs to 192.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181129163655.20370-5-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:48:04 +00:00
Edgar E. Iglesias
fb179055fe hw/arm: versal: Use IRQs 111 - 118 for virtio-mmio
Use IRQs 111 - 118 for virtio-mmio. The interrupts we're currently
using 160+ are not available in the Versal GIC.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181129163655.20370-4-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:48:03 +00:00
Edgar E. Iglesias
7fd8115f9d hw/arm: versal: Reduce number of virtio-mmio instances
Reduce number of virtio-mmio instances. This is in preparation
for correcting the interrupt setup for Versal.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181129163655.20370-3-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:48:03 +00:00
Edgar E. Iglesias
d942769f12 hw/arm: versal: Remove bogus virtio-mmio creation
Remove bogus virtio-mmio creation. This was an accidental
left-over an experiment.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20181129163655.20370-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:48:03 +00:00
Mao Zhongyi
817a17fc60 core/sysbus: remove the SysBusDeviceClass::init path
Currently, all sysbus devices have been converted to realize(),
so remove this path.

Cc: ehabkost@redhat.com
Cc: thuth@redhat.com
Cc: pbonzini@redhat.com
Cc: armbru@redhat.com
Cc: peter.maydell@linaro.org
Cc: richard.henderson@linaro.org
Cc: alistair.francis@wdc.com

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Message-id: 20181130093852.20739-22-maozhongyi@cmss.chinamobile.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:48:03 +00:00
Mao Zhongyi
57fe9b4d9b xen_backend: remove xen_sysdev_init() function
The init function doesn't do anything at all, so we
just omit it.

Cc: sstabellini@kernel.org
Cc: anthony.perard@citrix.com
Cc: xen-devel@lists.xenproject.org
Cc: peter.maydell@linaro.org

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-id: 20181130093852.20739-21-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:48:02 +00:00
Mao Zhongyi
f7c5f21eaa usb/tusb6010: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
tusb6010_class_init().

Cc: kraxel@redhat.com

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Message-id: 20181130093852.20739-20-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:48:02 +00:00
Mao Zhongyi
30735a2b88 timer/puv3_ost: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
puv3_ost_class_init().

Cc: gxt@mprc.pku.edu.cn

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-19-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:48:02 +00:00
Mao Zhongyi
23251fb82f timer/grlib_gptimer: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
grlib_gptimer_class_init().

Cc: chouteau@adacore.com

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-18-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:48:02 +00:00
Mao Zhongyi
34a598f675 timer/etraxfs_timer: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
etraxfs_timer_class_init().

Cc: edgar.iglesias@gmail.com

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181130093852.20739-17-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:48:00 +00:00
Mao Zhongyi
9b27555af1 pci-bridge/dec: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
pci_dec_21154_device_class_init().

Cc: david@gibson.dropbear.id.au
Cc: mst@redhat.com
Cc: marcel.apfelbaum@gmail.com
Cc: qemu-ppc@nongnu.org

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 20181130093852.20739-16-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:48:00 +00:00
Mao Zhongyi
296097f7dd nvram/ds1225y: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
nvram_sysbus_class_init().

Cc: pbonzini@redhat.com
Cc: marcandre.lureau@redhat.com

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-15-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:48:00 +00:00
Mao Zhongyi
96cd459498 puv3_pm.c: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
puv3_pm_class_init().

Cc: gxt@mprc.pku.edu.cn

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-14-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:48:00 +00:00
Mao Zhongyi
6b14e87399 milkymist-pfpu: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
milkymist_pfpu_class_init().

Cc: michael@walle.cc

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-13-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:59 +00:00
Mao Zhongyi
0f2eabce0d milkymist-hpdmc: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
milkymist_hpdmc_class_init().

Cc: gxt@mprc.pku.edu.cn
Cc: michael@walle.cc

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-12-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:59 +00:00
Mao Zhongyi
2f59de8877 intc/puv3_intc: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
puv3_intc_class_init().

Cc: gxt@mprc.pku.edu.cn

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-11-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:59 +00:00
Mao Zhongyi
988e501a0d input/pl050: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
pl050_class_init().

Cc: peter.maydell@linaro.org
Cc: qemu-arm@nongnu.org

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-10-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:59 +00:00
Mao Zhongyi
f1e321a8dc milkymist-softusb: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
milkymist_softusb_class_init().

Cc: michael@walle.cc

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-9-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:58 +00:00
Mao Zhongyi
671872b673 gpio/puv3_gpio: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
puv3_gpio_class_init().

Cc: gxt@mprc.pku.edu.cn
Cc: peter.maydell@linaro.org

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-8-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:58 +00:00
Mao Zhongyi
8ba7f72611 dma/puv3_dma: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
puv3_dma_class_init().

Cc: gxt@mprc.pku.edu.cn

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-7-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:58 +00:00
Mao Zhongyi
0323ee4321 display/g364fb: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
g364fb_sysbus_class_init().

Cc: pbonzini@redhat.com
Cc: kraxel@redhat.com
Cc: f4bug@amsat.org
Cc: alistair.francis@wdc.com

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-6-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:57 +00:00
Mao Zhongyi
4dbf209d42 core/empty_slot: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
empty_slot_class_init().

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-5-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:57 +00:00
Mao Zhongyi
ddaa6e049f char/grlib_apbuart: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
grlib_apbuart_class_init().

Cc: chouteau@adacore.com
Cc: marcandre.lureau@redhat.com
Cc: pbonzini@redhat.com

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-4-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:57 +00:00
Mao Zhongyi
887c74ca19 block/noenand: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
onenand_class_init().

Cc: kwolf@redhat.com
Cc: mreitz@redhat.com
Cc: qemu-block@nongnu.org

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-3-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:57 +00:00
Mao Zhongyi
7f7420a09f musicpal: Convert sysbus init function to realize function
Use DeviceClass rather than SysBusDeviceClass in
mv88w8618_wlan_class_init().

Cc: jan.kiszka@web.de
Cc: peter.maydell@linaro.org
Cc: qemu-arm@nongnu.org

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181130093852.20739-2-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:56 +00:00
Ricardo Perez Blanco
751ebc13cc Allow AArch64 processors to boot from a kernel placed over 4GB
Architecturally, it's possible for an AArch64 machine to have
all of its RAM over the 4GB mark, but our kernel/initrd loading
code in boot.c assumes that the upper half of the addresses
to load these images to is always zero. Write the whole 64 bit
address into the bootloader code fragment, not just the low half.

Note that, currently, none of the existing QEMU machines have
their main memory over 4GBs, so this was not a user-visible bug.

Signed-off-by: Ricardo Perez Blanco <ricardo.perez_blanco@nokia.com>
[PMM: revised commit message and tweaked some long lines]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:56 +00:00
Li Qiang
bd02b01454 hw: arm: musicpal: drop TYPE_WM8750 in object_property_set_link()
The third argument of object_property_set_link() is the name of
property, not related with the QOM type name, using the constant
string instead.

Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 1542880825-2604-1-git-send-email-liq3ea@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:47:56 +00:00
Peter Maydell
c3ec0fa1a8 Monitor patches for 2018-12-12
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcEN4PAAoJEDhwtADrkYZT9IsP/1B1sWdX4vakOnSMXeTgqHE6
 8G6jRlwOzHF4vehqDHrx7VLril5G3t9An7ZsGB95L54SXRdiaGEyn9ScK+PbHQzD
 Qak0RycT1fX2GP7wJG/yxyXKG8jAMoHpFwFzHnfM4kW+UegLOVOBxPqVfKQmTlz2
 rPqVVUNFp6oRpTPUJ6GDpOtyJ4/Y2YKx5kncctkV/SWpT1tXRxue9gOyx1qesqAK
 i2FAZPmpw3SEacZZvR9Zzl5s5mPjCK4qfVfaAaBNSd/HMt2OIoixN+q+vQ7hfXCk
 yuPnvf0dWVxBkIltbs225qTx9M8Km5ElSuiuXuwzVyUBJEVUmV2UgAL8VMuDi1lQ
 M1iOGpO4nsaD3Lbg3vZnRaJbXkWnZshrYntrwbi6sP5G88TkzTknpSJrP1UXOJSx
 YAhnKl6B0hulgl1eRW+Zq5qKKlz5K7huaexHtgN5hd3x+kljF1Gh9qSdUxLunwdB
 TMW2x01xjKwv84XAPRibNMSsxMgP7nMCrx3U9sxf7w/kfZYQSaqv//cCn8mqRWgc
 9PAtj1DQuPG9n4vOqjHF6D2kQ81oFkJWLsdvYM1TXXuSHDc6fZRrGEUc1OhNcYdK
 XPoA69RP/NShoME1070vsrlzMndwg6zuKwJAOX5vja0rngZk25IzDbt9DE7USook
 72dmKIiFDBFD1TECj5Yo
 =/D6l
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2018-12-12' into staging

Monitor patches for 2018-12-12

# gpg: Signature made Wed 12 Dec 2018 10:08:15 GMT
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-monitor-2018-12-12:
  tests: add oob functional test for test-qmp-cmds
  Revert "tests: Add parameter to qtest_init_without_qmp_handshake"
  monitor: Remove "x-oob", offer capability "oob" unconditionally
  monitor: Suspend monitor instead dropping commands
  monitor: avoid potential dead-lock when cleaning up
  monitor: prevent inserting new monitors after cleanup
  colo: check chardev can switch context
  monitor: check if chardev can switch gcontext for OOB
  char: add a QEMU_CHAR_FEATURE_GCONTEXT flag
  monitor: accept chardev input from iothread
  monitor: inline ambiguous helper functions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:41:44 +00:00
Peter Maydell
6145a6d84b s390x patches for 4.0:
- add 4.0 machine type
 - various fixes and small changes
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEw9DWbcNiT/aowBjO3s9rk8bwL68FAlwQ2kQSHGNvaHVja0By
 ZWRoYXQuY29tAAoJEN7Pa5PG8C+v8uUQAI9JbNgmqygGrdXcjvcl8NXrE3uAYu53
 GLY/HytZv33bg8zlhITUEY0WZ1mWM+yHvZy9XQVq0chjeq2WiDJL677oOXnWqAbd
 ncXajTjK6wbYbjiJ0j5xkZZuQYxzy3Pec84/L0gfMNFuSBd3DOODDsBL+k9zZMHg
 vCo5zPJaTkJpmri80+KUX55AOGb4EvwM/JnCvDlnUFqMDR4B/siWh09mMECUT1P/
 ulRSxBSe/ZBeuYFrHEWmZTFpQkFvIRWYMQnHU5dF8bCaMGe6HM9PLy6+AFT4XtRX
 37NR5fhofFVVyHG5MaIUnv9iLCQsy7qzkig9KMZz9NZtQ3+nLXKuptxJd6R677Bz
 GH4nx/i8jjlfpGIO/Gs2JhzsNfLy7w00eCoK8egi8tk51Saj3ydnONADvgYAf3+C
 +VmGquSmFyvR4U1Vk/gLpp0UDEAqq2INPooydGnG+Ipnbv4h5b2oYmdi8VTJySKR
 /ty+hCjcyBzH4rWzM+9+TX3aPp6mbcG3iscDrj2lxIN/X/DysemNQo62n4f76ZGz
 MHqXB5+vNocMTBu35dCIAFRKfX/QIW3Jr2JtlVdsm8jh1T6kZ2mK/kTnVhxaTFQD
 hHeCHijNzYfo/D5htnsgt5Wsy8+nLlA1ErjKZwkgCbUAvWEFl3deT8Ver1ZZGAlL
 WdvIG6QDvqrZ
 =it2k
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20181212' into staging

s390x patches for 4.0:
- add 4.0 machine type
- various fixes and small changes

# gpg: Signature made Wed 12 Dec 2018 09:52:04 GMT
# gpg:                using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>"
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20181212:
  hw/s390x/virtio-ccw.c: Don't take address of fields in packed structs
  vfio-ap: flag as compatible with balloon
  s390x/tod: Properly stop the KVM TOD while the guest is not running
  s390/MAINTAINERS: Add Halil as kvm and machine maintainer
  s390x: introduce 4.0 compat machine
  s390x/zpci: drop msix.available

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 13:06:09 +00:00
Peter Maydell
b39c027d82 Pull request
Minor virtio-blk fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJcENnZAAoJEJykq7OBq3PI01IH/j1i5kcsKYNUHzk0tI7du1Nc
 EtZj6Ekf9GQGQjyIJYlX42dkLPVR7fQhGbyj47p/ruSialkUhj6kh4TUX9r3bBG7
 nyLxKbYRNDwtPLC/ZWvHwoOiw8IlnKal4Jx/QGID5/0oRaU8HC98+6r47AZagyg2
 6mLc23icfsx3YL/QAEVKL/OJvFhI/vpUZzL1alpAIRFJWxFEIKgQWvZUbzJq5+Cr
 SyNOZ3G9X5es/cbzEjD5+oqwpMOSkuIRqp2Nb+VHyV8ana1g/y19ZVstj+XkP2qQ
 OeMRl9VV460hh6SFS4Iyq5VzY6qaQ+bSFMRyLuO+rALo9Md+6a6Zw5Si6I/++WE=
 =dWKB
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

Minor virtio-blk fixes.

# gpg: Signature made Wed 12 Dec 2018 09:50:17 GMT
# gpg:                using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  virtio-blk: fix comment for virtio_blk_rw_complete as nalloc is initially -1
  virtio-blk: rename iov to out_iov in virtio_blk_handle_request()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 11:35:42 +00:00
Peter Maydell
41d8452d6b Merge tpm 2018/12/04 v1
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJcBpyAAAoJEHWtZYAqC0IRFugH/RxVUA48nJjOW2xVgxeSbBhn
 LrkkNPtRp24Nr1dBpmcNRiOyFS5xmkAL6G6KdkZ21To5m7UBx7Lr+X1InSK2ePHS
 jfTTuEA0w5yWHv95tNgJs0u6x2m58TKLiUoNWS5nAeOizgQ7k7s/Y6QEVdDrlHoO
 CCaUxvDtuU9sYEUO8ccYx72GlK+Ak3BSYyFsiCIC6bT2aYa+RA74vlovmKP0RB5w
 utjUuI3OOfS5MRAxBJ9OUiD55aufJQL7454wGb0tXWAurCnCAzTjNSCTD3psmEsg
 xAInKFUVxYvnx+qEeOMgnf2dKuaPCJyYud6gztmIikEmJPXyZWiP3lViWxCIPEQ=
 =9Br9
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2018-12-04-1' into staging

Merge tpm 2018/12/04 v1

# gpg: Signature made Tue 04 Dec 2018 15:25:52 GMT
# gpg:                using RSA key 75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE  C66B 75AD 6580 2A0B 4211

* remotes/stefanberger/tags/pull-tpm-2018-12-04-1:
  tpm: Make sure the locality received from backend is valid
  tpm: Make sure new locality passed to tpm_tis_prep_abort() is valid
  tpm: Remove unused locty parameter from tpm_tis_abort()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13 09:27:30 +00:00
Peter Maydell
8be76cf17b x86 queue, 2018-12-11
* New CPU features: MOVDIRI, MOVDIR64B (Liu Jingqi);
   STIBP (Eduardo Habkost)
 * Fix clang build warning (Peter Maydell)
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJcECOoAAoJECgHk2+YTcWmVJEP/i84W3cxiB512E04qB7hLFkB
 R+S+oZfwflQRslJjJugwNl69YrrCJc/w+0k+ly2fNyDAv0WqiHnfC0EFhUc/kNLG
 wP5RA7i9Y+ZQDHtSJGF4Wre4wfzb6+2y057DEx9pddnEIpkyTudPsoK81HyTBwfZ
 DIn1QizmjL78+PAe4JY08jz1Rp+fjmvaFrRiIx5RWqZ/ojcSHdUvltjhzx+rleuT
 lx2Ra95ZH5OYHHEMFT55wpjhmm+Q2qa/RnwJyFCuQEpa/23Vy2hEKNNz6mgQpVux
 EzQ8VH8rtqYPwzAwnd9XWUYP/W5OPUrxWmJbGe3MygNIgGv5IUbJC8pkb2v1bRJB
 URZD6hSG2LcTIuZsnKvE1oSBATbkCRrmDhmQXmz4ZzIFh89r8MsJqYkfIzfhEh5L
 DM2I80kNp/vj2/WH5HIeDkJb0DP2YsFA9yyEF82Dqt/0mBYCBx+u3JsljnEhMRi1
 v1ul1a6+qjp+tTsCdI4nJ3dpjO5RDtYZ5d/gD+wEuB0yOSTUqoPbHOP4iXlWyq8Z
 85r7/rtE68Vura7M6gwXjO3/rc/G5Tj0bd74yZsEmoMh9ZaxuIwPAWyo198uamp+
 esl5GqnfUv+UcyuMQup8KGVQGh9MxBfEbigmbpfGvTpAALzWhZ80dS7lPZ6923+u
 DpY1coadtgsIRVHbLSWN
 =24BF
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging

x86 queue, 2018-12-11

* New CPU features: MOVDIRI, MOVDIR64B (Liu Jingqi);
  STIBP (Eduardo Habkost)
* Fix clang build warning (Peter Maydell)

# gpg: Signature made Tue 11 Dec 2018 20:52:56 GMT
# gpg:                using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-next-pull-request:
  i386: Add "stibp" flag name
  target/i386/kvm.c: Don't mark cpuid_data as QEMU_PACKED
  x86/cpu: Enable MOVDIR64B cpu feature
  x86/cpu: Enable MOVDIRI cpu feature

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-12 21:11:49 +00:00
Greg Kurz
93aee84f57 9p: remove support for the "handle" backend
The "handle" fsdev backend was deprecated in QEMU 2.12.0 with:

commit db3b3c7281
Author: Greg Kurz <groug@kaod.org>
Date:   Mon Jan 8 11:18:23 2018 +0100

    9pfs: deprecate handle backend

    This backend raise some concerns:

    - doesn't support symlinks
    - fails +100 tests in the PJD POSIX file system test suite [1]
    - requires the QEMU process to run with the CAP_DAC_READ_SEARCH
      capability, which isn't recommended for security reasons

    This backend should not be used and wil be removed. The 'local'
    backend is the recommended alternative.

    [1] https://www.tuxera.com/community/posix-test-suite/

    Signed-off-by: Greg Kurz <groug@kaod.org>
    Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
    Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

It has passed the two release cooling period without any complaint.

Remove it now.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2018-12-12 14:18:10 +01:00
Greg Kurz
75607e0dcc xen/9pfs: use g_new(T, n) instead of g_malloc(sizeof(T) * n)
Because it is a recommended coding practice (see HACKING).

Signed-off-by: Greg Kurz <groug@kaod.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2018-12-12 14:18:10 +01:00
Greg Kurz
1923923bfa 9p: use g_new(T, n) instead of g_malloc(sizeof(T) * n)
Because it is a recommended coding practice (see HACKING).

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
2018-12-12 14:18:10 +01:00
Vladimir Sementsov-Ogievskiy
c972fa123c crypto: support multiple threads accessing one QCryptoBlock
The two thing that should be handled are cipher and ivgen. For ivgen
the solution is just mutex, as iv calculations should not be long in
comparison with encryption/decryption. And for cipher let's just keep
per-thread ciphers.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-12 11:16:49 +00:00
Vladimir Sementsov-Ogievskiy
0f0d596cb1 crypto/block: introduce qcrypto_block_*crypt_helper functions
Introduce QCryptoBlock-based functions and use them where possible.
This is needed to implement thread-safe encrypt/decrypt operations.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-12 11:16:49 +00:00
Vladimir Sementsov-Ogievskiy
0270417c87 crypto/block: rename qcrypto_block_*crypt_helper
Rename qcrypto_block_*crypt_helper to qcrypto_block_cipher_*crypt_helper,
as it's not about QCryptoBlock. This is needed to introduce
qcrypto_block_*crypt_helper in the next commit, which will have
QCryptoBlock pointer and than will be able to use additional fields of
it, which in turn will be used to implement thread-safe QCryptoBlock
operations.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-12 11:16:49 +00:00
Vladimir Sementsov-Ogievskiy
1dc57b6038 crypto/block: refactor qcrypto_block_*crypt_helper functions
qcrypto_block_encrypt_helper and qcrypto_block_decrypt_helper are
almost identical, let's reduce code duplication and simplify further
improvements.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-12 11:16:49 +00:00
Vladimir Sementsov-Ogievskiy
b640adca9f crypto/block-luks: fix memory leak in qcrypto_block_luks_create
Free block->cipher and block->ivgen on error path.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-12 11:16:49 +00:00
Alberto Garcia
a8b826d47a crypto: Fix defaults in QCryptoBlockCreateOptionsLUKS
The values specified in the documentation don't match the actual
defaults set in qcrypto_block_luks_create().

Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-12 11:16:49 +00:00
Larry Dewey
7ff5920717 trace: simple style changes
This changes two lines in simple.c that end with a comma, and replaces them
with a semi-colon.

Signed-off-by: Larry Dewey <ldewey@suse.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20181127190849.10558-1-ldewey@suse.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-12-12 10:04:59 +00:00
Fabiano Rosas
8fbc12f324 tracetool: Include thread id information in log backend
Currently the log backend prints the process id of QEMU at the start
of each output line, but since threads share the same PID there is no
clear distinction between their outputs.

Having the thread id present in the log makes it easier to see when
output comes from different threads. E.g.:

12423@1538597569.672527:qemu_mutex_lock waiting on mutex 0x1103ee60 (/root/qemu/util/main-loop.c:236)
...
12430@1538597569.503928:qemu_mutex_unlock released mutex 0x1103ee60 (/root/qemu/cpus.c:1238)
12431@1538597569.503937:qemu_mutex_locked taken mutex 0x1103ee60 (/root/qemu/cpus.c:1257)
^here

In the above, 12423 is the main process id and 12430 & 12431 are the
two vcpu threads.

 (qemu) info cpus
 * CPU #0: thread_id=12430
   CPU #1: thread_id=12431

Suggested-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-12-12 10:04:59 +00:00