Even though monitor_get_fd() has to remain separate because it is mocked by
tests/unit/test-util-sockets, monitor_fdsets_cleanup() is logically part
of the stubs for monitor/fds.c, so move it there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-19-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently it is not documented anywhere why some functions need to
be stubbed.
Group the files in stubs/meson.build according to who needs them, both
to reduce the size of the compilation and to clarify the use of stubs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240408155330.522792-18-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
replay.c symbols are only needed by user mode emulation, with the
exception of replay_mode that is needed by both user mode emulation
(by way of qemu_guest_getrandom) and block layer tools (by way of
util/qemu-timer.c).
Since it is needed by libqemuutil rather than specific files that
are part of the tools and emulators, split the replay_mode stub
into its own file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240408155330.522792-17-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the colo stubs are needed exactly when the build options are not
enabled, move them together with the code they stub.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240408155330.522792-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the memory-device stubs are needed exactly when the Kconfig symbols are not
needed, move them to hw/mem/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-15-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the ramfb stubs are needed exactly when the Kconfig symbols are not
needed, move them to hw/display/ and compile them when ramfb.c is absent.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-14-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the semihosting stubs are needed exactly when the Kconfig symbols
are not needed, move them to semihosting/ and conditionalize them
on CONFIG_SEMIHOSTING and/or CONFIG_SYSTEM_ONLY.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240408155330.522792-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the virtio memory device stubs are needed exactly when the
Kconfig symbol is not enabled, they can be placed in hw/virtio/ and
conditionalized on CONFIG_VIRTIO_MD.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the USB stubs are needed exactly when the Kconfig symbols are not
enabled, they can be placed in hw/usb/ and conditionalized on CONFIG_USB.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These file define functions are are not called from common code
anymore. Delete those functions and, if applicable, the entire files.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-10-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hotplug.c, qdev-hotplug.c and reset.c are not used by user emulation
and need not be included in hwcore_ss. Move them to system_ss, where
they belong, by letting the linker pull in the stubs when needed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240408155330.522792-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 04b0de0ee8 ("xen: factor out common functions")
xen_hvm_inject_msi() stub is not required.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20231114143816.71079-8-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231208113529.74067-7-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231208113529.74067-6-philmd@linaro.org>
Rather than having to lookup for what the 0, 1, 2, ...
icount values are, use a enum definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231208113529.74067-4-philmd@linaro.org>
Following the example documented since commit e3fe3988d7 ("error:
Document Error API usage rules"), have icount_configure()
return a boolean indicating whether an error is set or not.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231208113529.74067-2-philmd@linaro.org>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Extend the blocker interface so that a blocker can be registered for
one or more migration modes. The existing interfaces register a
blocker for all modes, and the new interfaces take a varargs list
of modes.
Internally, maintain a separate blocker list per mode. The same Error
object may be added to multiple lists. When a block is deleted, it is
removed from every list, and the Error is freed.
No functional change until a new mode is added.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1698263069-406971-3-git-send-email-steven.sistare@oracle.com>
Modify migrate_add_blocker and migrate_del_blocker to take an Error **
reason. This allows migration to own the Error object, so that if
an error occurs in migrate_add_blocker, migration code can free the Error
and clear the client handle, simplifying client code. It also simplifies
the migrate_del_blocker call site.
In addition, this is a pre-requisite for a proposed future patch that would
add a mode argument to migration requests to support live update, and
maintain a list of blockers for each mode. A blocker may apply to a single
mode or to multiple modes, and passing Error** will allow one Error object
to be registered for multiple modes.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1697634216-84215-1-git-send-email-steven.sistare@oracle.com>
* Support for VFIODisplay migration with ramfb
* Preliminary work for IOMMUFD support
-----BEGIN PGP SIGNATURE-----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=s0fN
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20231018' of https://github.com/legoater/qemu into staging
vfio queue:
* Support for VFIODisplay migration with ramfb
* Preliminary work for IOMMUFD support
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmUvlEYACgkQUaNDx8/7
# 7KFlaw//X2053de2eTdo38/UMSzi5ACWWn2j1iGQZf/3+J2LcdlixZarZr/2DN56
# 4axmwF6+GKozt5+EnvWtgodDn6U9iyMNaAB3CGBHFHsH8uqKeZd/Ii754q4Rcmy9
# ZufBOPWm9Ff7s2MMFiAZvso75jP2wuwVEe1YPRjeJnsNSNIJ6WZfemh3Sl96yRBb
# r38uqzqetKwl7HziMMWP3yb8v+dU8A9bqI1hf1FZGttfFz3XA+pmjXKA6XxdfiZF
# AAotu5x9w86a08sAlr/qVsZFLR37oQykkXM0D840DafJDyr5fbJiq8cwfOjMw9+D
# w6+udRm5KoBWPsvb/T3dR88GRMO22PChjH9Vjl51TstMNhdTxuKJTKhhSoUFZbXV
# 8CMjwfALk5ggIOyCk1LRd04ed+9qkqgcbw1Guy5pYnyPnY/X6XurxxaxS6Gemgtn
# UvgRYhSjio+LgHLO77IVkWJMooTEPzUTty2Zxa7ldbbE+utPUtsmac9+1m2pnpqk
# 5VQmB074QnsJuvf+7HPU6vYCzQWoXHsH1UY/A0fF7MPedNUAbVYzKrdGPyqEMqHy
# xbilAIaS3oO0pMT6kUpRv5c5vjbwkx94Nf/ii8fQVjWzPfCcaF3yEfaam62jMUku
# stySaRpavKIx2oYLlucBqeKaBGaUofk13gGTQlsFs8pKCOAV7r4=
# =s0fN
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 Oct 2023 04:16:06 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20231018' of https://github.com/legoater/qemu: (22 commits)
hw/vfio: add ramfb migration support
ramfb-standalone: add migration support
ramfb: add migration support
vfio/pci: Remove vfio_detach_device from vfio_realize error path
vfio/ccw: Remove redundant definition of TYPE_VFIO_CCW
vfio/ap: Remove pointless apdev variable
vfio/pci: Fix a potential memory leak in vfio_listener_region_add
vfio/common: Move legacy VFIO backend code into separate container.c
vfio/common: Introduce a global VFIODevice list
vfio/common: Store the parent container in VFIODevice
vfio/common: Introduce a per container device list
vfio/common: Move VFIO reset handler registration to a group agnostic function
vfio/ccw: Use vfio_[attach/detach]_device
vfio/ap: Use vfio_[attach/detach]_device
vfio/platform: Use vfio_[attach/detach]_device
vfio/pci: Introduce vfio_[attach/detach]_device
vfio/common: Extract out vfio_kvm_device_[add/del]_fd
vfio/common: Introduce vfio_container_add|del_section_window()
vfio/common: Propagate KVM_SET_DEVICE_ATTR error if any
vfio/common: Move IOMMU agnostic helpers to a separate file
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a "VFIODisplay" subsection whenever "x-ramfb-migrate" is turned on.
Turn it off by default on machines <= 8.1 for compatibility reasons.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
[ clg: - checkpatch fixes
- improved warn_report() in vfio_realize() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
We want to support memory devices that can automatically decide how many
memslots they will use. In the worst case, they have to use a single
memslot.
The target use cases are virtio-mem and the hyper-v balloon.
Let's calculate a reasonable limit such a memory device may use, and
instruct the device to make a decision based on that limit. Use a simple
heuristic that considers:
* A memslot soft-limit for all memory devices of 256; also, to not
consume too many memslots -- which could harm performance.
* Actually still free and unreserved memslots
* The percentage of the remaining device memory region that memory device
will occupy.
Further, while we properly check before plugging a memory device whether
there still is are free memslots, we have other memslot consumers (such as
boot memory, PCI BARs) that don't perform any checks and might dynamically
consume memslots without any prior reservation. So we might succeed in
plugging a memory device, but once we dynamically map a PCI BAR we would
be in trouble. Doing accounting / reservation / checks for all such
users is problematic (e.g., sometimes we might temporarily split boot
memory into two memslots, triggered by the BIOS).
We use the historic magic memslot number of 509 as orientation to when
supporting 256 memory devices -> memslots (leaving 253 for boot memory and
other devices) has been proven to work reliable. We'll fallback to
suggesting a single memslot if we don't have at least 509 total memslots.
Plugging vhost devices with less than 509 memslots available while we
have memory devices plugged that consume multiple memslots due to
automatic decisions can be problematic. Most configurations might just fail
due to "limit < used + reserved", however, it can also happen that these
memory devices would suddenly consume memslots that would actually be
required by other memslot consumers (boot, PCI BARs) later. Note that this
has always been sketchy with vhost devices that support only a small number
of memslots; but we don't want to make it any worse.So let's keep it simple
and simply reject plugging such vhost devices in such a configuration.
Eventually, all vhost devices that want to be fully compatible with such
memory devices should support a decent number of memslots (>= 509).
Message-ID: <20230926185738.277351-13-david@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
We want to support memory devices that have a dynamically managed memory
region container as device memory region. This device memory region maps
multiple RAM memory subregions (e.g., aliases to the same RAM memory
region), whereby these subregions can be (un)mapped on demand.
Each RAM subregion will consume a memslot in KVM and vhost, resulting in
such a new device consuming memslots dynamically, and initially usually
0. We already track the number of used vs. required memslots for all
memslots. From that, we can derive the number of reserved memslots that
must not be used otherwise.
The target use case is virtio-mem and the hyper-v balloon, which will
dynamically map aliases to RAM memory region into their device memory
region container.
Properly document what's supported and what's not and extend the vhost
memslot check accordingly.
Message-ID: <20230926185738.277351-10-david@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
We want to place non-qmp stubs in there, so let's rename it. While at
it, put it into the MAINTAINERS file under "Memory devices".
Message-ID: <20230926185738.277351-8-david@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Before this change, the information from a XML file was stored in an
array that is not descriptive. Introduce a dedicated structure type to
make it easier to understand and to extend with more fields.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230912224107.29669-6-akihiko.odaki@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-13-alex.bennee@linaro.org>
Add a check in 'softmmu-uaccess.h' that the header is only
include in system emulation, and rename it as 'uaccess.h'.
Rename the API methods:
- softmmu_[un]lock_user*() -> uaccess_[un]lock_user*()
- softmmu_strlen_user() -> uaccess_strlen_user().
Update a pair of comments.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-9-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix:
semihosting/config.c:134:49: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
int qemu_semihosting_config_options(const char *optarg)
^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/getopt.h:77:14: note: previous declaration is here
extern char *optarg; /* getopt(3) external variables */
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004120019.93101-10-philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Let's factor out (un)plug handling, to be reused from arm/virt code.
Provide stubs for the case that CONFIG_VIRTIO_MD is not selected because
neither virtio-mem nor virtio-pmem is enabled. While this cannot
currently happen for x86, it will be possible for arm/virt.
Message-ID: <20230711153445.514112-3-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
xen_piix3_set_irq() isn't PIIX specific: PIIX is a single PCI device
while xen_piix3_set_irq() maps multiple PCI devices to their respective
IRQs, which is board-specific. Rename xen_piix3_set_irq() to communicate
this.
Also rename XEN_PIIX_NUM_PIRQS to XEN_IOAPIC_NUM_PIRQS since the Xen's
IOAPIC rather than PIIX has this many interrupt routes.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <20230312120221.99183-2-shentey@gmail.com>
Message-Id: <20230403074124.3925-2-shentey@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Now we no longer have any events that are for vcpus we can start
excising the code from the trace control. As the vcpu parameter is
encoded as part of QMP we just stub out the has_vcpu/vcpu parameters
rather than alter the API.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230526165401.574474-8-alex.bennee@linaro.org
Message-Id: <20230524133952.3971948-7-alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Let's make better public interface for COLO: instead of
colo_process_incoming_thread and not trivial logic around creating the
thread let's make simple colo_incoming_co(), hiding implementation from
generic code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515130640.46035-4-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add option to not build filter-rewriter and colo-compare when
they are not needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20230515130640.46035-2-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We don't allow to use x-colo capability when replication is not
configured. So, no reason to build COLO when replication is disabled,
it's unusable in this case.
Note also that the check in migrate_caps_check() is not the only
restriction: some functions in migration/colo.c will just abort if
called with not defined CONFIG_REPLICATION, for example:
migration_iteration_finish()
case MIGRATION_STATUS_COLO:
migrate_start_colo_process()
colo_process_checkpoint()
abort()
It could probably make sense to have possibility to enable COLO without
REPLICATION, but this requires deeper audit of colo & replication code,
which may be done later if needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230428194928.1426370-4-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
As we are about to have a common syscalls.c for gdbstub we need to
stub out one semihosting helper function for all targets.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230307170405.796822-1-alex.bennee@linaro.org>
replay API is used deeply within TCG common code (common to user
and system emulation). Unfortunately "sysemu/replay.h" requires
some QAPI headers for few system-specific declarations, example:
void replay_input_event(QemuConsole *src, InputEvent *evt);
Since commit c2651c0eaa ("qapi/meson: Restrict UI module to system
emulation and tools") the QAPI header defining the InputEvent is
not generated anymore.
To keep it simple, extract the 'core' replay prototypes to a new
"exec/replay-core.h" header which we include in the TCG code that
doesn't need the rest of the replay API.
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <20221219170806.60580-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.
qmp_query_vm_generation_id() in stubs/vmgenid.c is the last user of
QERR_UNSUPPORTED outside qga/. Unlike the stubs we just dropped, it
is actually reachable, namely when CONFIG_ACPI_VMGENID is off. It
always fails like
(qemu) info vm-generation-id
Error: this feature or command is not currently supported
Turns out the real qmp_query_vm_generation_id() doesn't actually
depend on CONFIG_ACPI_VMGENID, and fails safely when it's off. Move
it to hw/core/machine-qmp-cmds.c, and drop the stub. The error
message becomes
Error: VM Generation ID device not found
Feels like an improvement to me.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-8-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Add/remove the AioContext in aio_context_list in graph-lock.c when it is
created/destroyed. This allows using the graph locking operations from
this AioContext.
In order to allow linking util/async.c with binaries that don't include
the block layer, introduce stubs for (un)register_aiocontext().
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221207131838.239125-5-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/qdev.json and
qapi/qom.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Eduardo Habkost <eduardo@habkost.net>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221104160712.3005652-21-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
If configuring with "--disable-system --disable-user --enable-guest-agent"
the linking currently fails with:
qga/qemu-ga.p/commands.c.o: In function `qmp_command_info':
build/../../home/thuth/devel/qemu/qga/commands.c:70: undefined reference to `qmp_command_name'
build/../../home/thuth/devel/qemu/qga/commands.c:71: undefined reference to `qmp_command_is_enabled'
build/../../home/thuth/devel/qemu/qga/commands.c:72: undefined reference to `qmp_has_success_response'
qga/qemu-ga.p/commands.c.o: In function `qmp_guest_info':
build/../../home/thuth/devel/qemu/qga/commands.c:82: undefined reference to `qmp_for_each_command'
qga/qemu-ga.p/commands.c.o: In function `qmp_guest_exec':
build/../../home/thuth/devel/qemu/qga/commands.c:410: undefined reference to `qbase64_decode'
qga/qemu-ga.p/channel-posix.c.o: In function `ga_channel_open':
build/../../home/thuth/devel/qemu/qga/channel-posix.c:214: undefined reference to `unix_listen'
build/../../home/thuth/devel/qemu/qga/channel-posix.c:228: undefined reference to `socket_parse'
build/../../home/thuth/devel/qemu/qga/channel-posix.c:234: undefined reference to `socket_listen'
qga/qemu-ga.p/commands-posix.c.o: In function `qmp_guest_file_write':
build/../../home/thuth/devel/qemu/qga/commands-posix.c:527: undefined reference to `qbase64_decode'
Let's make sure that we also compile and link the required files if
the system emulators have not been enabled.
Message-Id: <20221110083626.31899-1-thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The blkio block driver will need to look up the file descriptor for a
given pointer. This is possible in softmmu builds where the RAMBlock API
is available for querying guest RAM.
Add stubs so tools like qemu-img that link the block layer still build
successfully. In this case there is no guest RAM but that is fine.
Bounce buffers and their file descriptors will be allocated with
libblkio's blkio_alloc_mem_region() so we won't rely on QEMU's
qemu_ram_get_fd() in that case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20221013185908.1297568-12-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make source buffers const for char be write functions.
This allows using buffers returned by fifo as buf parameter and source buffer
should not be changed by write functions anyway.
Signed-off-by: Arwed Meyer <arwed.meyer@gmx.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220911181840.8933-3-arwed.meyer@gmx.de>
Currently our semihosting implementations generally prohibit use of
semihosting calls in system emulation from the guest userspace. This
is a very long standing behaviour justified originally "to provide
some semblance of security" (since code with access to the
semihosting ABI can do things like read and write arbitrary files on
the host system). However, it is sometimes useful to be able to run
trusted guest code which performs semihosting calls from guest
userspace, notably for test code. Add a command line suboption to
the existing semihosting-config option group so that you can
explicitly opt in to semihosting from guest userspace with
-semihosting-config userspace=on
(There is no equivalent option for the user-mode emulator, because
there by definition all code runs in userspace and has access to
semihosting already.)
This commit adds the infrastructure for the command line option and
adds a bool 'is_user' parameter to the function
semihosting_userspace_enabled() that target code can use to check
whether it should be permitting the semihosting call for userspace.
It mechanically makes all the callsites pass 'false', so they
continue checking "is semihosting enabled in general". Subsequent
commits will make each target that implements semihosting honour the
userspace=on option by passing the correct value and removing
whatever "don't do this for userspace" checking they were doing by
hand.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822141230.3658237-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
xen_piix_pci_write_config_client() is implemented in the xen sub tree and
uses PIIX constants internally, thus creating a direct dependency on
PIIX. Now that xen_set_pci_link_route() is stubbable, the logic of
xen_piix_pci_write_config_client() can be moved to PIIX which resolves
the dependency.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20220626094656.15673-3-shentey@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The only user of xen_set_pci_link_route() is
xen_piix_pci_write_config_client() which implements PIIX-specific logic in
the xen namespace. This makes xen-hvm depend on PIIX which could be
avoided if xen_piix_pci_write_config_client() was implemented in PIIX. In
order to do this, xen_set_pci_link_route() needs to be stubbable which
this patch addresses.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20220626094656.15673-2-shentey@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rename qemu_semihosting_connect_chardevs to
qemu_semihosting_chardev_init; pass the result
directly to qemu_semihosting_console_init.
Store the chardev in SemihostingConsole instead
of SemihostingConfig, which lets us drop
semihosting_get_chardev.
Reviewed-by: Luc Michel <lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
