Commit Graph

5206 Commits

Author SHA1 Message Date
Philippe Mathieu-Daudé
4565afbbf0 hw/arm/xlnx-zynqmp: Remove obsolete 'has_rpu' property
We hint the 'has_rpu' property is no longer required since commit
6908ec448b ("xlnx-zynqmp: Properly support the smp command line
option") which was released in QEMU v2.11.0.

Beside, this device is marked 'user_creatable = false', so the
only thing that could be setting the property is the board code
that creates the device.

Since the property is not user-facing, we can remove it without
going through the deprecation process.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210219144350.1979905-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-05 15:17:34 +00:00
Doug Evans
7758643650 hw/arm: Add npcm7xx emc model
This is a 10/100 ethernet device that has several features.
Only the ones needed by the Linux driver have been implemented.
See npcm7xx_emc.c for a list of unimplemented features.

Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Doug Evans <dje@google.com>
Message-id: 20210218212453.831406-3-dje@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-05 15:17:34 +00:00
Doug Evans
01c966b54f hw/net: Add npcm7xx emc model
This is a 10/100 ethernet device that has several features.
Only the ones needed by the Linux driver have been implemented.
See npcm7xx_emc.c for a list of unimplemented features.

Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com>
Signed-off-by: Doug Evans <dje@google.com>
Message-id: 20210218212453.831406-2-dje@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-05 15:17:34 +00:00
Bin Meng
8e3c886870 hw/riscv: sifive_u: Change SIFIVE_U_GEM_IRQ to decimal value
All other peripherals' IRQs are in the format of decimal value.
Change SIFIVE_U_GEM_IRQ to be consistent.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-7-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04 09:43:29 -05:00
Bin Meng
722f1352b6 hw/riscv: sifive_u: Add QSPI2 controller and connect an SD card
This adds the QSPI2 controller to the SoC, and connects an SD
card to it. The generation of corresponding device tree source
fragment is also added.

Specify machine property `msel` to 11 to boot the same upstream
U-Boot SPL and payload image for the SiFive HiFive Unleashed board.
Note subsequent payload is stored in the SD card image.

$ qemu-system-riscv64 -nographic -M sifive_u,msel=11 -smp 5 -m 8G \
    -bios u-boot-spl.bin -drive file=sdcard.img,if=sd

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-6-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04 09:43:29 -05:00
Bin Meng
145b299139 hw/riscv: sifive_u: Add QSPI0 controller and connect a flash
This adds the QSPI0 controller to the SoC, and connects an ISSI
25WP256 flash to it. The generation of corresponding device tree
source fragment is also added.

Since the direct memory-mapped mode is not supported by the SiFive
SPI model, the <reg> property does not populate the second group
which represents the memory mapped address of the SPI flash.

With this commit, upstream U-Boot for the SiFive HiFive Unleashed
board can boot on QEMU 'sifive_u' out of the box. This allows users
to develop and test the recommended RISC-V boot flow with a real
world use case: ZSBL (in QEMU) loads U-Boot SPL from SPI flash to
L2LIM, then U-Boot SPL loads the payload from SPI flash that is
combined with OpenSBI fw_dynamic firmware and U-Boot proper.

Specify machine property `msel` to 6 to allow booting from the SPI
flash. U-Boot spl is directly loaded via `-bios`, and subsequent
payload is stored in the SPI flash image. Example command line:

$ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -smp 5 -m 8G \
    -bios u-boot-spl.bin -drive file=spi-nor.img,if=mtd

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-5-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04 09:43:29 -05:00
Bin Meng
0694dabe97 hw/ssi: Add SiFive SPI controller support
This adds the SiFive SPI controller model for the FU540 SoC.
The direct memory-mapped SPI flash mode is unsupported.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-4-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04 09:43:29 -05:00
Peter Maydell
c40ae5a3ee pc,virtio,pci: bug fixes
Fixes all over the place. Specifically this fixes
 a bug which made windows guests lose device config
 (such as the configured fixed IP) after upgrading
 to the new QEMU.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmA+SYcPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpUAAIALa9WkjdxjZhb4FzP1OLBSTEISLEfrPE4Zk/
 s5yY1wEDvH83D6fxTHv1B8tISwJ3RJn8ZhsP0c0Mb6stT7D33m7YfMFtNXBEfENX
 gMgwdC2QxGMZXKGR+dIpxtYghjvuzAVN+e9w27C+s855JJ8y+chghtLuDJIbqpAk
 QopftjiZix2bPYmrxlVw/A7inXL2jseJyYsgGAzIACmsGC70jK4Rk1vxrAF+2n15
 D4qKOG3QLJXrfIVa8iDz/ojlVUmLWl8jnoE+oY+rjtckQHJKqodlJi5yeJxGEa3/
 G7db+AIzEBge78dq7LBSJOTjoUFoQ+6Hv1QtKk2GcMKdEnsj0ng=
 =NGys
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,virtio,pci: bug fixes

Fixes all over the place. Specifically this fixes
a bug which made windows guests lose device config
(such as the configured fixed IP) after upgrading
to the new QEMU.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 02 Mar 2021 14:19:51 GMT
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  vhost: simplify vhost_dev_init() fail_busyloop label
  hw/pci: Have safer pcie_bus_realize() by checking error path
  virtio-net: handle zero mac for a vdpa peer
  i386/acpi: restore device paths for pre-5.1 vms

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-03 16:55:15 +00:00
Peter Maydell
07dbfdd290 * fix --enable-fuzzing linker failures (Alexander)
* target/i386: Add bus lock debug exception support (Chenyi)
 * update documentation for preferred boolean option syntax (Daniel)
 * make SCSI io_timeout configurable (Hannes)
 * fix handling of guest recoverable SCSI errors (myself)
 * misc fixes (Pavel, Zheng Zhan Liang, Zihao)
 * fix installation of binaries with entitlements (Akihiko)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmA3tzQUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMsngf+OkbgTDouxq3qnn1K89n6j2wKlAj0
 qPP+57o1sv5u5MjX0BkawXCMJfvTKJaOt/Cs8S0FaPTehfR5H0T2tL76KZBEdlEP
 /+V3EC0Qmd1S47LKIOuDkV15szvnccyjpgwaL7Osjb0Eh0SxeXd4pBTc3yYtkacu
 zb/srZ63U2iJZr93QwGmEJjuW57WNym6QWXF3Mrg9PFXybkXFTGumB2vZMlQc+MN
 RWPTUKZKAiIr/HfdvpIETXY+HzJhylvIQ8OVWtM3XDorl48OWcOat/jyeNEVYgG3
 o+gxIRnfvIL+42GkmUFbOKLzT5SV6p9EYYGLTuE1kU7nc6HWoD0CdPxA3A==
 =UBVO
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* fix --enable-fuzzing linker failures (Alexander)
* target/i386: Add bus lock debug exception support (Chenyi)
* update documentation for preferred boolean option syntax (Daniel)
* make SCSI io_timeout configurable (Hannes)
* fix handling of guest recoverable SCSI errors (myself)
* misc fixes (Pavel, Zheng Zhan Liang, Zihao)
* fix installation of binaries with entitlements (Akihiko)

# gpg: Signature made Thu 25 Feb 2021 14:41:56 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (29 commits)
  tcg/i386: rdpmc: fix the the condtions
  chardev: do not use short form boolean options in non-QemuOpts character device descriptions
  vl: deprecate -writeconfig
  target/i386: Add bus lock debug exception support
  qom/object.c: Fix typo
  target/i386: update to show preferred boolean syntax for -cpu
  docs: update to show preferred boolean syntax for -cpu
  docs: update to show preferred boolean syntax for -vnc
  docs: update to show preferred boolean syntax for -chardev
  qemu-options: update to show preferred boolean syntax for -vnc
  qemu-options: update to show preferred boolean syntax for -incoming
  qemu-options: update to show preferred boolean syntax for -netdev
  qemu-options: update to show preferred boolean syntax for -spice
  qemu-options: update to show preferred boolean syntax for -chardev
  gdbstub: use preferred boolean option syntax
  char: don't fail when client is not connected
  scsi: drop 'result' argument from command_complete callback
  scsi-disk: pass guest recoverable errors through even for rerror=stop
  scsi-disk: pass SCSI status to scsi_handle_rw_error
  scsi: introduce scsi_sense_from_errno()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-02 15:17:45 +00:00
Vitaly Cheptsov
0a343a5add i386/acpi: restore device paths for pre-5.1 vms
After fixing the _UID value for the primary PCI root bridge in
af1b80ae it was discovered that this change updates Windows
configuration in an incompatible way causing network configuration
failure unless DHCP is used. More details provided on the list:

https://lists.gnu.org/archive/html/qemu-devel/2021-02/msg08484.html

This change reverts the _UID update from 1 to 0 for q35 and i440fx
VMs before version 5.2 to maintain the original behaviour when
upgrading.

Cc: qemu-stable@nongnu.org
Cc: qemu-devel@nongnu.org
Reported-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Vitaly Cheptsov <cheptsov@ispras.ru>
Message-Id: <20210301195919.9333-1-cheptsov@ispras.ru>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: af1b80ae56 ("i386/acpi: fix inconsistent QEMU/OVMF device paths")
2021-03-02 05:40:35 -05:00
Hannes Reinecke
17ea26c2d8 scsi: drop 'result' argument from command_complete callback
The command complete callback has a SCSIRequest as the first argument,
and the status field of that structure is identical to the 'status'
argument. So drop the argument from the callback.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Message-Id: <20201116184041.60465-3-hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-25 14:14:32 +01:00
Hannes Reinecke
c9b6609b69 scsi: make io_timeout configurable
The current code sets an infinite timeout on SG_IO requests,
causing the guest to stall if the host experiences a frame
loss.
This patch adds an 'io_timeout' parameter for SCSIDevice to
make the SG_IO timeout configurable, and also shortens the
default timeout to 30 seconds to avoid infinite stalls.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Message-Id: <20201116183114.55703-3-hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-25 14:14:32 +01:00
Isaku Yamahata
6be8cf56bc acpi/core: always set SCI_EN when SMM isn't supported
If SMM is not supported, ACPI fixed hardware doesn't support
legacy-mode. ACPI-only platform. Where SCI_EN in PM1_CNT register is
always set.
The bit tells OS legacy mode(SCI_EN cleared) or ACPI mode(SCI_EN set).

With the next patch (setting fadt.smi_cmd = 0 when smm isn't enabled),
guest Linux tries to switch to ACPI mode, finds smi_cmd = 0, and then
fails to initialize acpi subsystem. This patch proactively fixes it.

This patch changes guest ABI. To keep compatibility, use
"smm-compat" introduced by earlier patch. If the property is true,
disable new behavior.

ACPI spec 4.8.10.1 PM1 Event Grouping
PM1 Eanble Registers
> For ACPI-only platforms (where SCI_EN is always set)

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <500f62081626997e46f96377393d3662211763a8.1613615732.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-02-23 10:58:42 -05:00
Isaku Yamahata
24cd04fce0 ich9, piix4: add property, smm-compat, to keep compatibility of SMM
The following patch will introduce incompatible behavior of SMM.
Introduce a property to keep the old behavior for compatibility.
To enable smm compat, use "-global ICH9-LPC.smm-compat=on" or
"-global PIIX4_PM.smm-compat=on"

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <47254ae0b8c6cc6945422978b6b2af2d213ef891.1613615732.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2021-02-23 10:58:42 -05:00
Peter Maydell
00d8ba9e0d MIPS patches queue
- Drop redundant struct MemmapEntry (Bin)
 - Fix for Coverity CID 1438965 and 1438967 (Jiaxun)
 - Add MIPS bootloader API (Jiaxun)
 - Use MIPS bootloader API on fuloong2e and boston machines (Jiaxun)
 - Add PMON test for Loongson-3A1000 CPU (Jiaxun)
 - Convert to translator API (Philippe)
 - MMU cleanups (Philippe)
 - Promote 128-bit multimedia registers as global ones (Philippe)
 - Various cleanups/fixes on the VT82C686B southbridge (Zoltan)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmAyqe0ACgkQ4+MsLN6t
 wN5Vbw/7BbLUjqZzs4pDVUv4XXeSoVIP9fEmEUoxbVgb58cD6ZE6PeEN7fT+I++E
 fTu6Fw2WTHrGOWGkHRSOAGIAz4DqSsLJ2Qub4SRThdWgl9NgAgPDV32L7hCSJNfJ
 ejK9PL/B4dYS1RoRPULdrsiuKYsXcl/QBo99nQoa+0fquPQBnA3LlPJX7my9s2SB
 QoTK29V4KjLnTf4ebFP9mOHm4Z96lzl7jITjRUg4g5fh/IH+qlWlDUtMV5n2EL2b
 Jp798z1ydsEGHmM1O5xbjQixwZZYSgt+mjRn4fHH/mSLyfanJW/0pK1o6Ktl2zDC
 Ks1N0RNMsCZrvPXkUz6h7i6rXJsxzh0e96CmzOqBbKMzKuozig8ZMhmQTEGEvzf5
 cMxAKYJu95ndmRISV8p3fdsT/t0j08WZ5m3Syz/VqV57mVP3fj2yqiDXl1vwoPjM
 O2zYgK1VOgVsr0GPcJ5bHxDvuzbPvCd7YE0RhK2eFKkYLjQz7SEtC8RzmkKXoYze
 8nj7eBgG37vaPUGOyjZROOftrTXvqx6swB9kmQ38FrIfM/tZQYa54w4kFXF7nI06
 HIdiPIXPv+xqfwYUcsMuE/Mq/cXMTlgUF6445FHJ2yhaySrsch7BDR6BOgOmiNkM
 iXT0PdlS5P1J4y5HBzwQhrGslZGdXz+UsmF+zq4vgfbMul4VsoQ=
 =g7Kx
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/mips-20210221' into staging

MIPS patches queue

- Drop redundant struct MemmapEntry (Bin)
- Fix for Coverity CID 1438965 and 1438967 (Jiaxun)
- Add MIPS bootloader API (Jiaxun)
- Use MIPS bootloader API on fuloong2e and boston machines (Jiaxun)
- Add PMON test for Loongson-3A1000 CPU (Jiaxun)
- Convert to translator API (Philippe)
- MMU cleanups (Philippe)
- Promote 128-bit multimedia registers as global ones (Philippe)
- Various cleanups/fixes on the VT82C686B southbridge (Zoltan)

# gpg: Signature made Sun 21 Feb 2021 18:43:57 GMT
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/mips-20210221: (43 commits)
  vt82c686: Fix superio_cfg_{read,write}() functions
  vt82c686: Log superio_cfg unimplemented accesses
  vt82c686: Simplify by returning earlier
  vt82c686: Reduce indentation by returning early
  vt82c686: Remove index field of SuperIOConfig
  vt82c686: Move creation of ISA devices to the ISA bridge
  vt82c686: Simplify vt82c686b_realize()
  vt82c686: Make vt82c686b-pm an abstract base class and add vt8231-pm based on it
  vt82c686: Set user_creatable=false for VT82C686B_PM
  vt82c686: Fix up power management io base and config
  vt82c686: Correctly reset all registers to default values on reset
  vt82c686: Correct vt82c686-pm I/O size
  vt82c686: Make vt82c686-pm an I/O tracing region
  vt82c686: Fix SMBus IO base and configuration registers
  vt82c686: Reorganise code
  vt82c686: Move superio memory region to SuperIOConfig struct
  target/mips: Use GPR move functions in gen_HILO1_tx79()
  target/mips: Introduce gen_load_gpr_hi() / gen_store_gpr_hi() helpers
  target/mips: Rename 128-bit upper halve GPR registers
  target/mips: Promote 128-bit multimedia registers as global ones
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-21 19:52:58 +00:00
BALATON Zoltan
e1a69736e5 vt82c686: Make vt82c686b-pm an abstract base class and add vt8231-pm based on it
The vt82c686b-pm model can be shared between VT82C686B and VT8231. The
only difference between the two is the device id in what we emulate so
make an abstract via-pm model by renaming appropriately and add types
for vt82c686b-pm and vt8231-pm based on it.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <34969fc7be984fa070479bfb9f748993a0aef31b.1610223397.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21 19:42:34 +01:00
Jiaxun Yang
3ebbf86128 hw/mips: Add a bootloader helper
Add a bootloader helper to generate simple bootloaders for kernel.
It can help us reduce inline hex hack and also keep MIPS release 6
compatibility easier.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210127065424.114125-2-jiaxun.yang@flygoat.com>
[PMD: Restricted bl_reg enum to C source,
      inverted bl_gen_write() args,
      added license in hw/mips/bootloader.h]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21 18:41:04 +01:00
Peter Maydell
4115aec9af Pull request trivial patches 20210220
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmAxAc0SHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748FmsQAJWZ+WEGVpVqfL5SzNQaZEgrmAULUwvB
 sXWmtM33jtdiNfn+3MsMNSh+KgJWadzvtrH/2K1vL7jPBoesfizrF5a7obwfy6cR
 EDrUGrPuShr78UBFDreoxwAWfVG5sWNjilkirIavuuB9UsrfnSfeH5Us6gpY7WtW
 CisXazLJ5g5avWtCpQ7uowSvuU44IrWgfdNISKG3ZnUD5Zj3SDCXL5nRIB97uj4I
 xQxQ9LVdxn4eZ6hLxgciW4jqrQ3pQQmJDSLCtxQXSzuH6NAibdCzADkuyBIkQJdj
 K56r1hDKEN48LZtSriCt3kJSbeM07JF53DIGuX48jY4HOEBWWH810MWJ6QMvPqmR
 K9AUZNSY5tnfRJAL9Doy9fU7/VJG+OfO5y18UOB50OQcNN8lFnTbEEoFVdh9TACY
 pi7dJPKuCi5eKQWgBMhu26Zf03Shq8SVbWZaigF3+QRS4cfkKimSX/1Mguyes8va
 TryY3WVL9IcVQYE9S8nIdfTUJEKgDg8i8PmKAYa8aUj9c6X843wqur08chANTlB/
 nyPIQaXJe3wldaK87pgoPk8NeaCaSAWBndpC+bXn0rDHcn585VX1VdGbekBi+hYM
 6nYQEJhWHjImQmiowvF7x9Qe/obPpu5vyfreRWnXTPWZATHGxw8l9qfT23Xz/k2o
 KrEkuf8ibR3n
 =ipHI
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging

Pull request trivial patches 20210220

# gpg: Signature made Sat 20 Feb 2021 12:34:21 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-6.0-pull-request:
  MAINTAINERS: Fix default-configs/ entries
  target/avr/cpu: Use device_class_set_parent_realize()
  hw/scsi/megasas: Remove pointless parenthesis
  u2f-passthru: put it into the 'misc' category
  tpm: put some tpm devices into the correct category
  nvdimm: put it into the 'storage' category
  vmmouse: put it into the 'input' category
  virtio-pmem: put it into the 'storage' category
  MAINTAINERS: add my github tree URL
  Fix SPDX-License-Identifier typos
  hw/block/fdc: Remove the check_media_rate property
  hw/i386/xen: Remove dead code

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-21 12:12:18 +00:00
Ryan Finnie
5054ba1066 Fix SPDX-License-Identifier typos
Several SPDX headers contain "SPDX-License-Identifer" (note the
missing "i" before "er"); fix these typos.

Signed-off-by: Ryan Finnie <ryan@finnie.org>
Cc: qemu-trivial@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210201200147.211914-1-ryan@finnie.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-02-20 12:36:19 +01:00
Bin Meng
995731d3f7 hw/sd: Introduce receive_ready() callback
At present there is a data_ready() callback for the SD data read
path. Let's add a receive_ready() for the SD data write path.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210128063035.15674-5-bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20 00:17:09 +01:00
Richard Henderson
d9bcb58a12 accel/tcg: Create io_recompile_replay_branch hook
Create a hook in which to split out the mips and
sh4 ifdefs from cpu_io_recompile.

[AJB: s/stoped/stopped/]

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210208233906.479571-3-richard.henderson@linaro.org>
Message-Id: <20210213130325.14781-12-alex.bennee@linaro.org>
2021-02-18 08:19:12 +00:00
Richard Henderson
8349d2aeb3 exec: Move TranslationBlock typedef to qemu/typedefs.h
This also means we don't need an extra declaration of
the structure in hw/core/cpu.h.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210208233906.479571-2-richard.henderson@linaro.org>
Message-Id: <20210213130325.14781-11-alex.bennee@linaro.org>
2021-02-18 08:19:08 +00:00
Peter Maydell
f0f75dc174 * HVF fixes
* Extra qos-test debugging output (Christian)
 * SEV secret address autodetection (James)
 * SEV-ES support (Thomas)
 * Relocatable paths bugfix (Stefan)
 * RR fix (Pavel)
 * EventNotifier fix (Greg)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmAr778UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNVLwf/V3lb/HbyqFkhacB9eqEsEXGC3Hdp
 hU4J11P3lGS84muByxCdfw1axCGZ5x2cJmJSE71LfCcHXxEQSx4FmfxX5xeKbp1n
 vHPJ1XKhsFkOYA2O6mCW4yynTfizmp+JK36wwjmG3BEXTMMC5o2V8gAnzkP1sT9l
 0h454CtPq2lD0upgVIvI7AStpWXZwysh0hQEDk8TsIfFfzLNs+MJyvlPGn4pj+kN
 k+G3475FinPdncIBGsnRNMfiBmA4/L0L4lriQzZPV57lDfZ8sJkrmh1+/JfK6vsb
 FWIe6Suior6JGorzATbXrFhmNJ+FxNNEmlzSdqRxRz7CDv0SDZb7Ckv37Q==
 =FDIr
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* HVF fixes
* Extra qos-test debugging output (Christian)
* SEV secret address autodetection (James)
* SEV-ES support (Thomas)
* Relocatable paths bugfix (Stefan)
* RR fix (Pavel)
* EventNotifier fix (Greg)

# gpg: Signature made Tue 16 Feb 2021 16:15:59 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (21 commits)
  replay: fix icount request when replaying clock access
  event_notifier: Set ->initialized earlier in event_notifier_init()
  hvf: Fetch cr4 before evaluating CPUID(1)
  target/i386/hvf: add rdmsr 35H MSR_CORE_THREAD_COUNT
  hvf: x86: Remove unused definitions
  target/i386/hvf: add vmware-cpuid-freq cpu feature
  hvf: Guard xgetbv call
  util/cutils: Skip "." when looking for next directory component
  tests/qtest/qos-test: dump QEMU command if verbose
  tests/qtest/qos-test: dump environment variables if verbose
  tests/qtest/qos-test: dump qos graph if verbose
  libqos/qgraph_internal: add qos_printf() and qos_printf_literal()
  libqos/qgraph: add qos_node_create_driver_named()
  sev/i386: Enable an SEV-ES guest based on SEV policy
  kvm/i386: Use a per-VM check for SMM capability
  sev/i386: Don't allow a system reset under an SEV-ES guest
  sev/i386: Allow AP booting under SEV-ES
  sev/i386: Require in-kernel irqchip support for SEV-ES guests
  sev/i386: Add initial support for SEV-ES
  sev: update sev-inject-launch-secret to make gpa optional
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-17 13:04:48 +00:00
James Bottomley
9617cddb72 pc: add parser for OVMF reset block
OVMF is developing a mechanism for depositing a GUIDed table just
below the known location of the reset vector.  The table goes
backwards in memory so all entries are of the form

<data>|len|<GUID>

Where <data> is arbtrary size and type, <len> is a uint16_t and
describes the entire length of the entry from the beginning of the
data to the end of the guid.

The foot of the table is of this form and <len> for this case
describes the entire size of the table.  The table foot GUID is
defined by OVMF as 96b582de-1fb2-45f7-baea-a366c55a082d and if the
table is present this GUID is just below the reset vector, 48 bytes
before the end of the firmware file.

Add a parser for the ovmf reset block which takes a copy of the block,
if the table foot guid is found, minus the footer and a function for
later traversal to return the data area of any specified GUIDs.

Signed-off-by: James Bottomley <jejb@linux.ibm.com>

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210204193939.16617-2-jejb@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-16 17:15:39 +01:00
Hao Wu
6b6e7570d6 hw/i2c: Implement NPCM7XX SMBus Module FIFO Mode
This patch implements the FIFO mode of the SMBus module. In FIFO, the
user transmits or receives at most 16 bytes at a time. The FIFO mode
allows the module to transmit large amount of data faster than single
byte mode.

Since we only added the device in a patch that is only a few commits
away in the same patch set. We do not increase the VMstate version
number in this special case.

Reviewed-by: Doug Evans<dje@google.com>
Reviewed-by: Tyrong Ting<kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20210210220426.3577804-6-wuhaotsh@google.com
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16 14:12:54 +00:00
Hao Wu
94e7787939 hw/i2c: Implement NPCM7XX SMBus Module Single Mode
This commit implements the single-byte mode of the SMBus.

Each Nuvoton SoC has 16 System Management Bus (SMBus). These buses
compliant with SMBus and I2C protocol.

This patch implements the single-byte mode of the SMBus. In this mode,
the user sends or receives a byte each time. The SMBus device transmits
it to the underlying i2c device and sends an interrupt back to the QEMU
guest.

Reviewed-by: Doug Evans<dje@google.com>
Reviewed-by: Tyrong Ting<kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20210210220426.3577804-2-wuhaotsh@google.com
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-16 13:49:28 +00:00
Peter Maydell
932a8d1f11 arm: Update infocenter.arm.com URLs
Update infocenter.arm.com URLs for various pieces of Arm
documentation to the new developer.arm.com equivalents.  (There is a
redirection in place from the old URLs, but we might as well update
our comments in case the redirect ever disappears in future.)

This patch covers all the URLs which are not MPS2/SSE-200/IoTKit
related (those are dealt with in a different patch).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210205171456.19939-1-peter.maydell@linaro.org
2021-02-11 11:50:14 +00:00
Peter Maydell
83339e21d0 Pull request
v4:
  * Add PCI_EXPRESS Kconfig dependency to fix s390x in "multi-process: setup PCI
    host bridge for remote device" [Philippe and Thomas]
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmAjprYACgkQnKSrs4Gr
 c8g8fwgAspVVcW0x2uBdrbbi2PSOtpTu+GGC8gYcvGS526WSINv+mY8QhUFPdaQO
 MErATW1FuIYuXBkvXcaIRWQGGZkfWd6AyjxjEls2jdcp1ScqJ+wnZmTDsgR8yIb3
 vOdsA03YJugrAmF4Lsdpkyq9KaWYlCUxrdPoagEopQCEETkKeEOXq40c3pxzeIBI
 75s8i28makJ8Logdvr9SBLsR7DL4mpoVQErUe2IMLGGbPSe5F49VD+b/qI20agoI
 7L8mDXqL02nc2qJL63hk2dq7pq++MWq0uDs8bbaCouxiFNrNA8zQ+flLP0VrFcP/
 gJUa92unwoKs+yVVppadBZKwjtkbYA==
 =r5oQ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha-gitlab/tags/block-pull-request' into staging

Pull request

v4:
 * Add PCI_EXPRESS Kconfig dependency to fix s390x in "multi-process: setup PCI
   host bridge for remote device" [Philippe and Thomas]

# gpg: Signature made Wed 10 Feb 2021 09:26:14 GMT
# gpg:                using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha-gitlab/tags/block-pull-request: (27 commits)
  docs: fix Parallels Image "dirty bitmap" section
  multi-process: perform device reset in the remote process
  multi-process: Retrieve PCI info from remote process
  multi-process: create IOHUB object to handle irq
  multi-process: Synchronize remote memory
  multi-process: PCI BAR read/write handling for proxy & remote endpoints
  multi-process: Forward PCI config space acceses to the remote process
  multi-process: add proxy communication functions
  multi-process: introduce proxy object
  multi-process: setup memory manager for remote device
  multi-process: Associate fd of a PCIDevice with its object
  multi-process: Initialize message handler in remote device
  multi-process: define MPQemuMsg format and transmission functions
  io: add qio_channel_readv_full_all_eof & qio_channel_readv_full_all helpers
  io: add qio_channel_writev_full_all helper
  multi-process: setup a machine object for remote device process
  multi-process: setup PCI host bridge for remote device
  multi-process: Add config option for multi-process QEMU
  memory: alloc RAM from file at offset
  multi-process: add configure and usage information
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-10 15:42:20 +00:00
Elena Ufimtseva
b6cc02d98f multi-process: perform device reset in the remote process
Perform device reset in the remote process when QEMU performs
device reset. This is required to reset the internal state
(like registers, etc...) of emulated devices

Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 7cb220a51f565dc0817bd76e2f540e89c2d2b850.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10 09:23:28 +00:00
Jagannathan Raman
bd36adb8df multi-process: create IOHUB object to handle irq
IOHUB object is added to manage PCI IRQs. It uses KVM_IRQFD
ioctl to create irqfd to injecting PCI interrupts to the guest.
IOHUB object forwards the irqfd to the remote process. Remote process
uses this fd to directly send interrupts to the guest, bypassing QEMU.

Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 51d5c3d54e28a68b002e3875c59599c9f5a424a1.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10 09:23:28 +00:00
Jagannathan Raman
c746b74a7d multi-process: Synchronize remote memory
Add ProxyMemoryListener object which is used to keep the view of the RAM
in sync between QEMU and remote process.
A MemoryListener is registered for system-memory AddressSpace. The
listener sends SYNC_SYSMEM message to the remote process when memory
listener commits the changes to memory, the remote process receives
the message and processes it in the handler for SYNC_SYSMEM message.

Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 04fe4e6a9ca90d4f11ab6f59be7652f5b086a071.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10 09:23:28 +00:00
Jagannathan Raman
7ee3f82384 multi-process: PCI BAR read/write handling for proxy & remote endpoints
Proxy device object implements handler for PCI BAR writes and reads.
The handler uses BAR_WRITE/BAR_READ message to communicate to the
remote process with the BAR address and value to be written/read.
The remote process implements handler for BAR_WRITE/BAR_READ
message.

Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: a8b76714a9688be5552c4c92d089bc9e8a4707ff.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10 09:23:28 +00:00
Elena Ufimtseva
11ab872588 multi-process: Forward PCI config space acceses to the remote process
The Proxy Object sends the PCI config space accesses as messages
to the remote process over the communication channel

Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: d3c94f4618813234655356c60e6f0d0362ff42d6.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10 09:23:28 +00:00
Elena Ufimtseva
e7b2c9eaa2 multi-process: add proxy communication functions
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: d54edb4176361eed86b903e8f27058363b6c83b3.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10 09:23:28 +00:00
Elena Ufimtseva
9f8112073a multi-process: introduce proxy object
Defines a PCI Device proxy object as a child of TYPE_PCI_DEVICE.

Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: b5186ebfedf8e557044d09a768846c59230ad3a7.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10 09:23:28 +00:00
Jagannathan Raman
ed5d001916 multi-process: setup memory manager for remote device
SyncSysMemMsg message format is defined. It is used to send
file descriptors of the RAM regions to remote device.
RAM on the remote device is configured with a set of file descriptors.
Old RAM regions are deleted and new regions, each with an fd, is
added to the RAM.

Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 7d2d1831d812e85f681e7a8ab99e032cf4704689.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10 09:23:28 +00:00
Jagannathan Raman
48b06f50d8 multi-process: Initialize message handler in remote device
Initializes the message handler function in the remote process. It is
called whenever there's an event pending on QIOChannel that registers
this function.

Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 99d38d8b93753a6409ac2340e858858cda59ab1b.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10 09:23:28 +00:00
Elena Ufimtseva
ad22c3088b multi-process: define MPQemuMsg format and transmission functions
Defines MPQemuMsg, which is the message that is sent to the remote
process. This message is sent over QIOChannel and is used to
command the remote process to perform various tasks.
Define transmission functions used by proxy and by remote.

Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 56ca8bcf95195b2b195b08f6b9565b6d7410bce5.1611938319.git.jag.raman@oracle.com

[Replace struct iovec send[2] = {0} with {} to make clang happy as
suggested by Peter Maydell <peter.maydell@linaro.org>.
--Stefan]

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10 09:23:28 +00:00
Jagannathan Raman
3f0e7e57a3 multi-process: setup a machine object for remote device process
x-remote-machine object sets up various subsystems of the remote
device process. Instantiate PCI host bridge object and initialize RAM, IO &
PCI memory regions.

Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: c537f38d17f90453ca610c6b70cf3480274e0ba1.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10 09:23:28 +00:00
Jagannathan Raman
6fbd84d632 multi-process: setup PCI host bridge for remote device
PCI host bridge is setup for the remote device process. It is
implemented using remote-pcihost object. It is an extension of the PCI
host bridge setup by QEMU.
Remote-pcihost configures a PCI bus which could be used by the remote
PCI device to latch on to.

Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 0871ba857abb2eafacde07e7fe66a3f12415bfb2.1611938319.git.jag.raman@oracle.com

[Added PCI_EXPRESS condition in hw/remote/Kconfig since remote-pcihost
needs PCIe. This solves "make check" failure on s390x. Fix suggested by
Philippe Mathieu-Daudé <philmd@redhat.com> and Thomas Huth
<thuth@redhat.com>.
--Stefan]

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-10 09:23:22 +00:00
Daniel Henrique Barboza
6640706972 spapr_numa.c: create spapr_numa_initial_nvgpu_numa_id() helper
We'll need to check the initial value given to spapr->gpu_numa_id when
building the rtas DT, so put it in a helper for easier access and to
avoid repetition.

Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210128174213.1349181-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-02-10 10:43:50 +11:00
Daniel Henrique Barboza
3b880445e6 spapr: move spapr_machine_using_legacy_numa() to spapr_numa.c
This function is used only in spapr_numa.c.

Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210128174213.1349181-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-02-10 10:43:50 +11:00
Cédric Le Goater
032c226bc6 ppc/pnv: Introduce a LPC FW memory region attribute to map the PNOR
This to map the PNOR from the machine init handler directly and finish
the cleanup of the LPC model.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210126171059.307867-8-clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-02-10 10:43:50 +11:00
Cédric Le Goater
cb9428642e ppc/xive: Add firmware bit when dumping the ENDs
ENDs allocated by OPAL for the HW thread VPs are tagged as owned by FW.
Dump the state in 'info pic'.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210126171059.307867-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-02-10 10:43:50 +11:00
Greg Kurz
040bdafce1 spapr: Adjust firmware path of PCI devices
It is currently not possible to perform a strict boot from USB storage:

$ qemu-system-ppc64 -accel kvm -nodefaults -nographic -serial stdio \
	-boot strict=on \
	-device qemu-xhci \
	-device usb-storage,drive=disk,bootindex=0 \
	-blockdev driver=file,node-name=disk,filename=fedora-ppc64le.qcow2

SLOF **********************************************************************
QEMU Starting
 Build Date = Jul 17 2020 11:15:24
 FW Version = git-e18ddad8516ff2cf
 Press "s" to enter Open Firmware.

Populating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
Populating /pci@800000020000000
                     00 0000 (D) : 1b36 000d    serial bus [ usb-xhci ]
No NVRAM common partition, re-initializing...
Scanning USB
  XHCI: Initializing
    USB Storage
       SCSI: Looking for devices
          101000000000000 DISK     : "QEMU     QEMU HARDDISK    2.5+"
Using default console: /vdevice/vty@71000000

  Welcome to Open Firmware

  Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
  This program and the accompanying materials are made available
  under the terms of the BSD License available at
  http://www.opensource.org/licenses/bsd-license.php

Trying to load:  from: /pci@800000020000000/usb@0/storage@1/disk@101000000000000 ...
E3405: No such device

E3407: Load failed

  Type 'boot' and press return to continue booting the system.
  Type 'reset-all' and press return to reboot the system.

Ready!
0 >

The device tree handed over by QEMU to SLOF indeed contains:

qemu,boot-list =
	"/pci@800000020000000/usb@0/storage@1/disk@101000000000000 HALT";

but the device node is named usb-xhci@0, not usb@0.

This happens because the firmware names of PCI devices returned
by get_boot_devices_list() come from pcibus_get_fw_dev_path(),
while the sPAPR PHB code uses a different naming scheme for
device nodes. This inconsistency has always been there but it was
hidden for a long time because SLOF used to rename USB device
nodes, until this commit, merged in QEMU 4.2.0 :

commit 85164ad4ed
Author: Alexey Kardashevskiy <aik@ozlabs.ru>
Date:   Wed Sep 11 16:24:32 2019 +1000

    pseries: Update SLOF firmware image

    This fixes USB host bus adapter name in the device tree to match QEMU's
    one.

    Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
    Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Fortunately, sPAPR implements the firmware path provider interface.
This provides a way to override the default firmware paths.

Just factor out the sPAPR PHB naming logic from spapr_dt_pci_device()
to a helper, and use it in the sPAPR firmware path provider hook.

Fixes: 85164ad4ed ("pseries: Update SLOF firmware image")
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210122170157.246374-1-groug@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-02-10 10:43:50 +11:00
David Gibson
651615d92d s390: Recognize confidential-guest-support option
At least some s390 cpu models support "Protected Virtualization" (PV),
a mechanism to protect guests from eavesdropping by a compromised
hypervisor.

This is similar in function to other mechanisms like AMD's SEV and
POWER's PEF, which are controlled by the "confidential-guest-support"
machine option.  s390 is a slightly special case, because we already
supported PV, simply by using a CPU model with the required feature
(S390_FEAT_UNPACK).

To integrate this with the option used by other platforms, we
implement the following compromise:

 - When the confidential-guest-support option is set, s390 will
   recognize it, verify that the CPU can support PV (failing if not)
   and set virtio default options necessary for encrypted or protected
   guests, as on other platforms.  i.e. if confidential-guest-support
   is set, we will either create a guest capable of entering PV mode,
   or fail outright.

 - If confidential-guest-support is not set, guests might still be
   able to enter PV mode, if the CPU has the right model.  This may be
   a little surprising, but shouldn't actually be harmful.

To start a guest supporting Protected Virtualization using the new
option use the command line arguments:
    -object s390-pv-guest,id=pv0 -machine confidential-guest-support=pv0

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-02-08 16:57:38 +11:00
David Gibson
6c8ebe30ea spapr: Add PEF based confidential guest support
Some upcoming POWER machines have a system called PEF (Protected
Execution Facility) which uses a small ultravisor to allow guests to
run in a way that they can't be eavesdropped by the hypervisor.  The
effect is roughly similar to AMD SEV, although the mechanisms are
quite different.

Most of the work of this is done between the guest, KVM and the
ultravisor, with little need for involvement by qemu.  However qemu
does need to tell KVM to allow secure VMs.

Because the availability of secure mode is a guest visible difference
which depends on having the right hardware and firmware, we don't
enable this by default.  In order to run a secure guest you need to
create a "pef-guest" object and set the confidential-guest-support
property to point to it.

Note that this just *allows* secure guests, the architecture of PEF is
such that the guest still needs to talk to the ultravisor to enter
secure mode.  Qemu has no direct way of knowing if the guest is in
secure mode, and certainly can't know until well after machine
creation time.

To start a PEF-capable guest, use the command line options:
    -object pef-guest,id=pef0 -machine confidential-guest-support=pef0

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
2021-02-08 16:57:38 +11:00
David Gibson
e0292d7c62 confidential guest support: Rework the "memory-encryption" property
Currently the "memory-encryption" property is only looked at once we
get to kvm_init().  Although protection of guest memory from the
hypervisor isn't something that could really ever work with TCG, it's
not conceptually tied to the KVM accelerator.

In addition, the way the string property is resolved to an object is
almost identical to how a QOM link property is handled.

So, create a new "confidential-guest-support" link property which sets
this QOM interface link directly in the machine.  For compatibility we
keep the "memory-encryption" property, but now implemented in terms of
the new property.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2021-02-08 16:57:38 +11:00
Claudio Fontana
fb6916dd6c accel: introduce AccelCPUClass extending CPUClass
add a new optional interface to CPUClass, which allows accelerators
to extend the CPUClass with additional accelerator-specific
initializations.

This will allow to separate the target cpu code that is specific
to each accelerator, and register it automatically with object
hierarchy lookup depending on accelerator code availability,
as part of the accel_init_interfaces() initialization step.

Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-19-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-02-05 10:24:15 -10:00
Claudio Fontana
940e43aa30 accel: extend AccelState and AccelClass to user-mode
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>

[claudio: rebased on Richard's splitwx work]

Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-17-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-02-05 10:24:15 -10:00