We document that for qcow2 persistent bitmaps, the name cannot exceed
1023 bytes. It is inconsistent if transient bitmaps do not have to
abide by the same limit, and it is unlikely that any existing client
even cares about using bitmap names this long. It's time to codify
that ALL bitmaps managed by qemu (whether persistent in qcow2 or not)
have a documented maximum length.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191114024635.11363-3-eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
This patch adds support for blkreplay driver to the blockdev options.
Now blkreplay can be used with -blockdev command line option
in the following format:
-blockdev driver=blkreplay,image=file-node-name,node-name=replay-node-name
This option makes possible implementation of the better command
line support for record/replay invocations.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This parameter has been deprecated since 2.12.0 and is eligible for
removal. Remove this parameter as it is actually completely ignored;
let's not give false hope.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191002232411.29968-1-jsnow@redhat.com
Drop write notifiers and use filter node instead.
= Changes =
1. Add filter-node-name argument for backup qmp api. We have to do it
in this commit, as 257 needs to be fixed.
2. There are no more write notifiers here, so is_write_notifier
parameter is dropped from block-copy paths.
3. To sync with in-flight requests at job finish we now have drained
removing of the filter, we don't need rw-lock.
4. Block-copy is now using BdrvChildren instead of BlockBackends
5. As backup-top owns these children, we also move block-copy state
into backup-top's ownership.
= Iotest changes =
56: op-blocker doesn't shoot now, as we set it on source, but then
check on filter, when trying to start second backup.
To keep the test we instead can catch another collision: both jobs will
get 'drive0' job-id, as job-id parameter is unspecified. To prevent
interleaving with file-posix locks (as they are dependent on config)
let's use another target for second backup.
Also, it's obvious now that we'd like to drop this op-blocker at all
and add a test-case for two backups from one node (to different
destinations) actually works. But not in these series.
141: Output changed: prepatch, "Node is in use" comes from bdrv_has_blk
check inside qmp_blockdev_del. But we've dropped block-copy blk
objects, so no more blk objects on source bs (job blk is on backup-top
filter bs). New message is from op-blocker, which is the next check in
qmp_blockdev_add.
257: The test wants to emulate guest write during backup. They should
go to filter node, not to original source node, of course. Therefore we
need to specify filter node name and use it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-6-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
A block driver can provide a callback to report driver-specific
statistics.
file-posix driver now reports discard statistics
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190923121737.83281-10-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190923121737.83281-3-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make the stat fields definition slightly more readable.
Also reorder total_time_ns stats read-write-flush as done elsewhere.
Cosmetic change only.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190923121737.83281-2-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When preallocating an encrypted qcow2 image, it just lets the protocol
driver write data and then does not mark the clusters as zero.
Therefore, reading this image will yield effectively random data.
As such, we have not fulfilled the promise of always writing zeroes when
preallocating an image in a while. It seems that nobody has really
cared, so change the documentation to conform to qemu's actual behavior.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190711132935.13070-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Let's add a possibility to query dirty-bitmaps not only on root nodes.
It is useful when dealing both with snapshots and incremental backups.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190717173937.18747-1-jsnow@redhat.com
[Added deprecation information. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
[Fixed spelling --js]
Accept bitmaps and sync policies for the other backup modes.
This allows us to do things like create a bitmap synced to a full backup
without a transaction, or start a resumable backup process.
Some combinations don't make sense, though:
- NEVER policy combined with any non-BITMAP mode doesn't do anything,
because the bitmap isn't used for input or output.
It's harmless, but is almost certainly never what the user wanted.
- sync=NONE is more questionable. It can't use on-success because this
job never completes with success anyway, and the resulting artifact
of 'always' is suspect: because we start with a full bitmap and only
copy out segments that get written to, the final output bitmap will
always be ... a fully set bitmap.
Maybe there's contexts in which bitmaps make sense for sync=none,
but not without more severe changes to the current job, and omitting
it here doesn't prevent us from adding it later.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This adds an "always" policy for bitmap synchronization. Regardless of if
the job succeeds or fails, the bitmap is *always* synchronized. This means
that for backups that fail part-way through, the bitmap retains a record of
which sectors need to be copied out to accomplish a new backup using the
old, partial result.
In effect, this allows us to "resume" a failed backup; however the new backup
will be from the new point in time, so it isn't a "resume" as much as it is
an "incremental retry." This can be useful in the case of extremely large
backups that fail considerably through the operation and we'd like to not waste
the work that was already performed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This adds a "never" policy for bitmap synchronization. Regardless of if
the job succeeds or fails, we never update the bitmap. This can be used
to perform differential backups, or simply to avoid the job modifying a
bitmap.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We don't need or want a new sync mode for simple differences in
semantics. Create a new mode simply named "BITMAP" that is designed to
make use of the new Bitmap Sync Mode field.
Because the only bitmap sync mode is 'on-success', this adds no new
functionality to the backup job (yet). The old incremental backup mode
is maintained as a syntactic sugar for sync=bitmap, mode=on-success.
Add all of the plumbing necessary to support this new instruction.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Depending on what a user is trying to accomplish, there might be a few
bitmap cleanup actions that occur when an operation is finished that
could be useful.
I am proposing three:
- NEVER: The bitmap is never synchronized against what was copied.
- ALWAYS: The bitmap is always synchronized, even on failures.
- ON-SUCCESS: The bitmap is synchronized only on success.
The existing incremental backup modes use 'on-success' semantics,
so add just that one for right now.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190709232550.10724-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
drive-backup and blockdev-backup have an awful lot of things in common
that are the same. Let's fix that.
I don't deduplicate 'target', because the semantics actually did change
between each structure. Leave that one alone so it can be documented
separately.
Where documentation was not identical, use the most up-to-date version.
For "speed", use Blockdev-Backup's version. For "sync", use
Drive-Backup's version.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
[Maintainer edit: modified commit message. --js]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190709232550.10724-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Reconnect will be implemented in the following commit, so for now,
in semantics below, disconnect itself is a "serious error".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-5-vsementsov@virtuozzo.com>
[eblake: slipped from 4.1 to 4.2]
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit cd219eb1e5 added the read-zeroes option for the null-co and
null-aio block driver, but forgot to add them to the QAPI schema.
Therefore, this option wasn't available in -blockdev and blockdev-add
until now.
Add the missing option in the schema to make it available there, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Together with @iotypes and @sector, this can be used to trap e.g. the
first read or write access to a certain sector without having to know
what happens internally in the block layer, i.e. which "real" events
happen right before such an access.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This new error option allows users of blkdebug to inject errors only on
certain kinds of I/O operations. Users usually want to make a very
specific operation fail, not just any; but right now they simply hope
that the event that triggers the error injection is followed up with
that very operation. That may not be true, however, because the block
layer is changing (including blkdebug, which may increase the number of
types of I/O operations on which to inject errors).
The new option's default has been chosen to keep backwards
compatibility.
Note that similar to the internal representation, we could choose to
expose this option as a list of I/O types. But there is no practical
use for this, because as described above, users usually know exactly
which kind of operation they want to make fail, so there is no need to
specify multiple I/O types at once. In addition, exposing this option
as a list would require non-trivial changes to qemu_opts_absorb_qdict().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
A snapshot is something that reflects the state of something at a
certain point in time. It does not change.
The file our snapshot commands create (or the node they install) is not
a snapshot, as it does change over time. It is an overlay. We cannot
do anything about the parameter names, but we can at least adjust the
descriptions to reflect that fact.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190603202236.1342-2-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In commit 23dece19da ('file-posix: Make auto-read-only dynamic') ,
auto-read-only=on changed its behaviour in file-posix for the 4.0
release. This change cannot be detected through the usual mechanisms
like schema introspection. Add a new feature flag to the schema to
allow libvirt to detect the presence of the new behaviour.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190606153803.5278-7-armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Comment tweaked on Eric Blake's advice]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add default and available values in the documentation block of
each block device or protocol that supports the 'preallocation'
parameter during the image creation.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190524075848.23781-2-sgarzare@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add new optional parameter making possible to merge bitmaps from
different nodes. It is needed to maintain external snapshots during
incremental backup chain history.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190517152111.206494-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
If COW areas of the newly allocated clusters are zeroes on the backing
image, efficient bdrv_write_zeroes(flags=BDRV_REQ_NO_FALLBACK) can be
used on the whole cluster instead of writing explicit zero buffers later
in perform_cow().
iotest 060:
write to the discarded cluster does not trigger COW anymore.
Use a backing image instead.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Message-id: 20190516142749.81019-2-anton.nefedov@virtuozzo.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There no @device parameter, only the @id one.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Add 'drop-cache=on|off' option to file-posix.c. The default is on.
Disabling the option fixes a QEMU 3.0.0 performance regression when live
migrating on the same host with cache.direct=off.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJciOSEAAoJEJykq7OBq3PIVSUIAI6r2Mgoi+no4nle8Jf2nZ+W
EnQXnNEFyJA0lKRtqQ2UILD9udVdKd/L1PZu5k/Il/Ralto9Yf3+62brekI7rsss
c3Qusu4LUK6jom2RslRjRIaJ9GilQi/jWezKV/O0VlcsMVemgVHX008EIR+ea1U4
H0/u2kfu04PciKQ5MR2+6aacu9bfmyH1yM2no+aMN5dDu/38PV6JEsf0Zl2agowg
opGepJ7YiDQsxH9IBXrbfm38mBrrY0K2vFzAb9BzTHfBPotGMNIZNJNM2FChRfoM
sTjOIpZz3NDwPEUPQPZxp+7YKRFFYfse1oHtpyh4n1rMQksB019SCGlP9TBhrF0=
=CH5G
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
* Add 'drop-cache=on|off' option to file-posix.c. The default is on.
Disabling the option fixes a QEMU 3.0.0 performance regression when live
migrating on the same host with cache.direct=off.
# gpg: Signature made Wed 13 Mar 2019 11:07:48 GMT
# gpg: using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
file-posix: add drop-cache=on|off option
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit dd577a26ff ("block/file-posix:
implement bdrv_co_invalidate_cache() on Linux") introduced page cache
invalidation so that cache.direct=off live migration is safe on Linux.
The invalidation takes a significant amount of time when the file is
large and present in the page cache. Normally this is not the case for
cross-host live migration but it can happen when migrating between QEMU
processes on the same host.
On same-host migration we don't need to invalidate pages for correctness
anyway, so an option to skip page cache invalidation is useful. I
investigated optimizing invalidation and detecting same-host migration,
but both are hard to achieve so a user-visible option will suffice.
As a bonus this option means that the cache invalidation feature will
now be detectable by libvirt via QMP schema introspection.
Suggested-by: Neil Skrypuch <neil@tembosocial.com>
Tested-by: Neil Skrypuch <neil@tembosocial.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190307164941.3322-1-stefanha@redhat.com
Message-Id: <20190307164941.3322-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This command allows reopening an arbitrary BlockDriverState with a
new set of options. Some options (e.g node-name) cannot be changed
and some block drivers don't allow reopening, but otherwise this
command is modelled after 'blockdev-add' and the state of the reopened
BlockDriverState should generally be the same as if it had just been
added by 'blockdev-add' with the same set of options.
One notable exception is the 'backing' option: 'x-blockdev-reopen'
requires that it is always present unless the BlockDriverState in
question doesn't have a current or default backing file.
This command allows reconfiguring the graph by using the appropriate
options to change the children of a node. At the moment it's possible
to change a backing file by setting the 'backing' option to the name
of the new node, but it should also be possible to add a similar
functionality to other block drivers (e.g. Quorum, blkverify).
Although the API is unlikely to change, this command is marked
experimental for the time being so there's room to see if the
semantics need changes.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drop x- and x_ prefixes for latency histograms and update version to
4.0
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Even though the status field is deprecated, we still have to support
it for a few more releases. Since this is a very new kind of bitmap
state, it makes sense for it to have its own status field.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add an inconsistent bit to dirty-bitmaps that allows us to report a bitmap as
persistent but potentially inconsistent, i.e. if we find bitmaps on a qcow2
that have been marked as "in use".
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The current API allows us to report a single status, which we've defined as:
Frozen: has a successor, treated as qmp_locked, may or may not be enabled.
Locked: no successor, qmp_locked. may or may not be enabled.
Disabled: Not frozen or locked, disabled.
Active: Not frozen, locked, or disabled.
The problem is that both "Frozen" and "Locked" mean nearly the same thing,
and that both of them do not intuit whether they are recording guest writes
or not.
This patch deprecates that status field and introduces two orthogonal
properties instead to replace it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Provide an option to force QEMU to always keep the external data file
consistent as a standalone read-only raw image.
At the moment, this means making sure that write_zeroes requests are
forwarded to the data file instead of just updating the metadata, and
checking that no backing file is used.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rather than requiring that the external data file node is passed
explicitly when creating the qcow2 node, store the filename in the
designated header extension during .bdrv_create and read it from there
as a default during .bdrv_open.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The meaning of the states has changed subtly over time,
this should bring the understanding more in-line with the
current, actual usages.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190202011048.12343-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Since qemu currently doesn't flush persistent bitmaps to disk until
shutdown (which might be MUCH later), it's useful if 'query-block'
at least shows WHICH bitmaps will (eventually) make it to persistent
storage. Update affected iotests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190204210512.27458-1-eblake@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In the 'Format specific information' section of the 'qemu-img info'
command output, the supplemental information about existing QCOW2
bitmaps will be shown, such as a bitmap name, flags and granularity:
image: /vz/vmprivate/VM1/harddisk.hdd
file format: qcow2
virtual size: 64G (68719476736 bytes)
disk size: 3.0M
cluster_size: 1048576
Format specific information:
compat: 1.1
lazy refcounts: true
bitmaps:
[0]:
flags:
[0]: in-use
[1]: auto
name: back-up1
granularity: 65536
[1]:
flags:
[0]: in-use
[1]: auto
name: back-up2
granularity: 65536
refcount bits: 16
corrupt: false
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1549638368-530182-3-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clarify that the number of extents provided in BlockdevCreateOptionsVmdk
must match the number of extents that will actually be used. Providing
more extents will result in an error now.
This requires adapting the test case to provide the right number of
extents.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This makes VMDK support blockdev-create. The implementation reuses the
image creation code in vmdk_co_create_opts which now acceptes a callback
pointer to "retrieve" BlockBackend pointers from the caller. This way we
separate the logic between file/extent acquisition and initialization.
The QAPI command parameters are mostly the same as the old create_opts
except the dropped legacy @compat6 switch, which is redundant with
@hwversion.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new command, returning block nodes (and their users) graph.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181221170909.25584-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The 'x' prefix was added because I was uncertain of the direction we'd
take for the libvirt API. With the general approach solidified, I feel
comfortable committing to this API for 4.0.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-5-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Especially outside of transactions, it is helpful to provide
all-or-nothing semantics for bitmap merges. This facilitates
the coalescing of multiple bitmaps into a single target for
the "checkpoint" interpretation when assembling bitmaps that
represent arbitrary points in time from component bitmaps.
This is an incompatible change from the preliminary version
of the API.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-4-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
