The vhost-user-blk export runs requests asynchronously in their own
coroutine. When the vhost connection goes away and we want to stop the
vhost-user server, we need to wait for these coroutines to stop before
we can unmap the shared memory. Otherwise, they would still access the
unmapped memory and crash.
This introduces a refcount to VuServer which is increased when spawning
a new request coroutine and decreased before the coroutine exits. The
memory is only unmapped when the refcount reaches zero.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220125151435.48792-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Graph modifications should be done in drained section. stream_prepare()
handler of block stream job call bdrv_set_backing_hd() without using
drained section and it's theoretically possible that some IO request
will interleave with graph modification and will use outdated pointers
to removed block nodes.
Some other callers use bdrv_set_backing_hd() not caring about drained
sections too. So it seems good to make a drained section exactly in
bdrv_set_backing_hd().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220124173741.2984056-1-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The syntax of the fd passing case misses the "addr.type=" key. Add it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220125151514.49035-1-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The comment "disk I/O throttling" doesn't make any sense at all
any more. It was added in commit 0563e19151 to describe
bdrv_io_limits_enable()/disable(), which were removed in commit
97148076, so the comment is just a forgotten leftover.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220131125615.74612-1-eesposit@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This test checks that a raw image in use by a virtio-blk device does not
share the WRITE permission both before and after migration.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
After migration, the permissions the guest device wants to impose on its
BlockBackend are stored in blk->perm and blk->shared_perm. In
blk_root_activate(), we take our permissions, but keep all shared
permissions open by calling `blk_set_perm(blk->perm, BLK_PERM_ALL)`.
Only afterwards (immediately or later, depending on the runstate) do we
restrict the shared permissions by calling
`blk_set_perm(blk->perm, blk->shared_perm)`. Unfortunately, our first
call with shared_perm=BLK_PERM_ALL has overwritten blk->shared_perm to
be BLK_PERM_ALL, so this is a no-op and the set of shared permissions is
not restricted.
Fix this bug by saving the set of shared permissions before invoking
blk_set_perm() with BLK_PERM_ALL and restoring it afterwards.
Fixes: 5f7772c4d0
("block-backend: Defer shared_perm tightening migration
completion")
Reported-by: Peng Liang <liangpeng10@huawei.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211125135317.186576-2-hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Peng Liang <liangpeng10@huawei.com>
compression_type can't be used if we want to create image with
compat=0.10. So, skip these tests, not many of them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-20-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The test-case "Corrupted size field in compressed cluster descriptor"
heavily depends on zlib compression type. So, make it explicit. This
way test passes with IMGOPTS='compression_type=zstd'.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-19-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Don't touch other incompatible bits, like compression-type. This makes
the test pass with IMGOPTS='compression_type=zstd'.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-18-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We want iotests pass with both the default zlib compression and with
IMGOPTS='compression_type=zstd'.
Actually the only test that is interested in real compression type in
test output is 287 (test for qcow2 compression type), so implement
specific option for it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-17-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
_qcow2_dump_header has filter for compression type, so this change
makes test pass with IMGOPTS='compression_type=zstd'.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-16-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to add filtering in _qcow2_dump_header and want all tests
use it.
The patch is generated by commands:
cd tests/qemu-iotests
sed -ie 's/$PYTHON qcow2.py "$TEST_IMG" dump-header\($\| \)/_qcow2_dump_header\1/' ??? tests/*
(the difficulty is to avoid converting dump-header-exts)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-15-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We'll use it in tests instead of explicit qcow2.py. Then we are going
to add some filtering in _qcow2_dump_header.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-14-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
If image doesn't have any compressed cluster we can easily switch to
zlib compression, which may allow to downgrade the image.
That's mostly needed to support IMGOPTS='compression_type=zstd' in some
iotests which do qcow2 downgrade.
While being here also fix checkpatch complain against '#' in printf
formatting.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-13-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Instead of qemu_img_log("info", ..) use generic helper img_info_log().
img_info_log() has smarter logic. For example it use filter_img_info()
to filter output, which in turns filter a compression type. So it will
help us in future when we implement a possibility to use zstd
compression by default (with help of some runtime config file or maybe
build option). For now to test you should recompile qemu with a small
addition into block/qcow2.c before
"if (qcow2_opts->has_compression_type":
if (!qcow2_opts->has_compression_type && version >= 3) {
qcow2_opts->has_compression_type = true;
qcow2_opts->compression_type = QCOW2_COMPRESSION_TYPE_ZSTD;
}
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-12-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We want iotests pass with both the default zlib compression and with
IMGOPTS='compression_type=zstd'.
Actually the only test that is interested in real compression type in
test output is 287 (test for qcow2 compression type) and it's in bash.
So for now we can safely filter out compression type in all qcow2
tests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-11-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The only "feature" of this "Formatting ..." line is that we have to
update it every time we add new option. Let's drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-10-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The test checks different options. It of course fails if set
IMGOPTS='compression_type=zstd'. So, let's be explicit in what
compression type we want and independent of IMGOPTS. Test both existing
compression types.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-9-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The test prints qcow2 header fields which depends on chosen compression
type. So, let's be explicit in what compression type we want and
independent of IMGOPTS. Test both existing compression types.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-8-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Move the logic to more generic qemu_img_pipe_and_status(). Also behave
better when we have several -o options. And reuse argument parser of
course.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-7-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_verbose() has a drawback of not going through generic
qemu_img_pipe_and_status(). qemu_img_verbose() is not very popular, so
update the only two users to qemu_img_log() and drop qemu_img_verbose()
at all.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-6-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Adding support of IMGOPTS (like in bash tests) allows user to pass a
lot of different options. Still, some may require additional logic.
Now we want compression_type option, so add some smart logic around it:
ignore compression_type=zstd in IMGOPTS, if test want qcow2 in
compatibility mode. As well, ignore compression_type for non-qcow2
formats.
Note that we may instead add support only to qemu_img_create(), but
that works bad:
1. We'll have to update a lot of tests to use qemu_img_create instead
of qemu_img('create'). (still, we may want do it anyway, but no
reason to create a dependancy between task of supporting IMGOPTS and
updating a lot of tests)
2. Some tests use qemu_img_pipe('create', ..) - even more work on
updating
3. Even if we update all tests to go through qemu_img_create, we'll
need a way to avoid creating new tests using qemu_img*('create') -
add assertions.. That doesn't seem good.
So, let's add support of IMGOPTS to most generic
qemu_img_pipe_and_status().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-5-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to support IMGOPTS for python iotests. Still some iotests
will not work with common IMGOPTS used with bash iotests like
specifying refcount_bits and compat qcow2 options. So we
should define corresponding unsupported_imgopts for now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211223160144.1097696-4-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to support some addition IMGOPTS in python iotests like
in bash iotests. Similarly to bash iotests, we want a way to skip some
tests which can't work with specific IMGOPTS.
Globally for python iotests we will not support things like
'data_file=$TEST_IMG.ext_data_file' in IMGOPTS, so, forbid this
globally in iotests.py.
Suggested-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to support IMGOPTS environment variable like in bash
tests. Corresponding global variable in iotests.py should be called
imgopts. So to not interfere with function argument, rename it in
advance.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-2-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This test assumes that mirror flushes the source when entering the READY
state, and that the format level will pass that flush on to the protocol
level (where we intercept it with blkdebug).
However, apparently that does not happen when using a VMDK image with
zeroed_grain=on, which actually is the default set by testenv.py. Right
now, Python tests ignore IMGOPTS, though, so this has no effect; but
Vladimir has a series that will change this, so we need to fix this test
before that series lands.
We can fix it by writing data to the source before we start the mirror
job; apparently that makes the (VMDK) format layer change its mind and
pass on the pre-READY flush to the protocol level, so the test passes
again. (I presume, without any data written, mirror just does a 64M
zero write on the target, which VMDK with zeroed_grain=on basically just
ignores.)
Without this, we do not get a flush, and so blkdebug only sees a single
flush at the end of the job instead of two, and therefore does not
inject an error, which makes the block job complete instead of raising
an error.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223165308.103793-1-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The lsi53c895a SCSI adaptor might not be enabled in each and every
x86 QEMU binary, e.g. it's disabled in the RHEL/CentOS build.
Thus let's add a check to the 051 test so that it does not fail if
this device is not available.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206143404.247032-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Upstream the bsd-user fork signal implementation, for the most part. This
series of commits represents nearly all of the infrastructure that surround
signals, except the actual system call glue (that was also reworked in the
fork and needs its own series). In addition, this adds the sigsegv and sigbus
code to arm. Even in the fork, we don't have good x86 signal implementation,
so there's little to upstream for that at the moment.
bsd-user's signal implementation is similar to linux-user's. The full context
can be found in the bsd-user's fork's 'blitz branch' at
https://github.com/qemu-bsd-user/qemu-bsd-user/tree/blitz which shows how these
are used to implement various system calls. Since this was built from
linux-user's stack stuff, evolved for BSD with the passage of a few years, it
no-doubt missed some bug fixes from linux-user (though nothing obvious stood out
in the quick comparison I made). After the first round of reviews, many of these
improvements have been incorporated.
Patchew history: https://patchew.org/QEMU/20220125012947.14974-1-imp@bsdimp.com/
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - https://gpgtools.org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=aZPm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bsdimp/tags/bsd-user-arm-2022q1-pull-request' into staging
bsd-user: upstream signal implementation
Upstream the bsd-user fork signal implementation, for the most part. This
series of commits represents nearly all of the infrastructure that surround
signals, except the actual system call glue (that was also reworked in the
fork and needs its own series). In addition, this adds the sigsegv and sigbus
code to arm. Even in the fork, we don't have good x86 signal implementation,
so there's little to upstream for that at the moment.
bsd-user's signal implementation is similar to linux-user's. The full context
can be found in the bsd-user's fork's 'blitz branch' at
https://github.com/qemu-bsd-user/qemu-bsd-user/tree/blitz which shows how these
are used to implement various system calls. Since this was built from
linux-user's stack stuff, evolved for BSD with the passage of a few years, it
no-doubt missed some bug fixes from linux-user (though nothing obvious stood out
in the quick comparison I made). After the first round of reviews, many of these
improvements have been incorporated.
Patchew history: https://patchew.org/QEMU/20220125012947.14974-1-imp@bsdimp.com/
# gpg: Signature made Mon 31 Jan 2022 19:55:51 GMT
# gpg: using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg: aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg: aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg: aka "Warner Losh <imp@village.org>" [unknown]
# gpg: aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD E1B7 6C1C D128 7DB0 1100
* remotes/bsdimp/tags/bsd-user-arm-2022q1-pull-request: (40 commits)
bsd-user/freebsd/target_os_ucontext.h: Prefer env as arg name for CPUArchState args
bsd-user: Rename arg name for target_cpu_reset to env
MAINTAINERS: Add tests/vm/*bsd to the list to get reviews on
bsd-user/signal.c: do_sigaltstack
bsd-user/signal.c: implement do_sigaction
bsd-user/signal.c: implement do_sigreturn
bsd-user/signal.c: process_pending_signals
bsd-user/signal.c: tswap_siginfo
bsd-user/signal.c: handle_pending_signal
bsd-user/signal.c: setup_frame
bsd-user/signal.c: sigset manipulation routines.
bsd-user/signal.c: Fill in queue_signal
bsd-user/signal.c: Implement dump_core_and_abort
bsd-user/strace.c: print_taken_signal
bsd-user/signal.c: Implement host_signal_handler
bsd-user/signal.c: Implement rewind_if_in_safe_syscall
bsd-user/signal.c: host_to_target_siginfo_noswap
bsd-user: Add trace events for bsd-user
bsd-user: Add host signals to the build
bsd-user/host/x86_64/host-signal.h: Implement host_signal_*
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename the parameter name for target_cpu_reset's CPUArchState * arg from
cpu to env.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
tests/vm/*bsd (especailly tests/vm/freebsd) are adjacent to the bsd-user
stuff and we're keen on keeping them working as well.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the meat of the sigaltstack(2) system call with do_sigaltstack.
With that, all the stubbed out routines are complete, so remove
now-incorrect comment.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the meat of the sigaction(2) system call with do_sigaction and
helper routiner block_signals (which is also used to implemement signal
masking so it's global).
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implements the meat of a sigreturn(2) system call via do_sigreturn, and
helper reset_signal_mask. Fix the prototype of do_sigreturn in qemu.h
and remove do_rt_sigreturn since it's linux only.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Hi
This time I have disabled vmstate canary patches form Dave Gilbert.
Let's see if it works.
Later, Juan.
-----BEGIN PGP SIGNATURE-----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=F/ek
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/quintela-gitlab/tags/migration-20220128-pull-request' into staging
Migration Pull request (Take 2)
Hi
This time I have disabled vmstate canary patches form Dave Gilbert.
Let's see if it works.
Later, Juan.
# gpg: Signature made Fri 28 Jan 2022 18:30:25 GMT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/quintela-gitlab/tags/migration-20220128-pull-request: (36 commits)
migration: Move temp page setup and cleanup into separate functions
migration: Simplify unqueue_page()
migration: Add postcopy_has_request()
migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat
migration: No off-by-one for pss->page update in host page size
migration: Tally pre-copy, downtime and post-copy bytes independently
migration: Introduce ram_transferred_add()
migration: Don't return for postcopy_send_discard_bm_ram()
migration: Drop return code for disgard ram process
migration: Do chunk page in postcopy_each_ram_send_discard()
migration: Drop postcopy_chunk_hostpages()
migration: Don't return for postcopy_chunk_hostpages()
migration: Drop dead code of ram_debug_dump_bitmap()
migration/ram: clean up unused comment.
migration: Report the error returned when save_live_iterate fails
migration/migration.c: Remove the MIGRATION_STATUS_ACTIVE when migration finished
migration/migration.c: Avoid COLO boot in postcopy migration
migration/migration.c: Add missed default error handler for migration state
Remove unnecessary minimum_version_id_old fields
multifd: Rename pages_used to normal_pages
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a new test to verify that want_zero=false block-status calls do not
pollute the block-status cache for want_zero=true calls.
We check want_zero=true calls and their results using `qemu-img map`
(over NBD), and want_zero=false calls also using `qemu-img map` over
NBD, but using the qemu:allocation-depth context.
(This test case cannot be integrated into nbd-qemu-allocation, because
that is a qcow2 test, and this is a raw test.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220118170000.49423-3-hreitz@redhat.com>
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Process the currently queued signals.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert siginfo from targer to host.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Handle a queued signal.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
setup_frame sets up a signalled stack frame. Associated routines to
extract the pointer to the stack frame and to support alternate stacks.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
target_sigemptyset: resets a set to having no bits set
target_sigaddset: adds a signal to a set
target_sigismember: returns true when signal is a member
host_to_target_sigset_internal: convert host sigset to target
host_to_target_sigset: convert host sigset to target
target_to_host_sigset_internal: convert target sigset to host
target_to_host_sigset: convert target sigset to host
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fill in queue signal implementation, as well as routines allocate and
delete elements of the signal queue.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Force delivering a signal and generating a core file. It's a global
function for the moment...
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
print_taken_signal() prints signals when we're tracing signals.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement host_signal_handler to handle signals generated by the host
and to do safe system calls.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
