Once the I/O completion callback returned, aiocb will be released by the
controller. So we have to clear the reference not only in
scsi_write_complete, but also in scsi_read_complete. Otherwise we risk
inconsistencies when a reset hits us before the related request is
released.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Ensure that pending requests of an SCSI disk are purged on system reset
and also restore max_lba. The latter is no only present in the reset
handler as that one is called after init as well.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The iov functions can be useful to other code as well.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
updated version of an old patch
http://xenon.stanford.edu/~eswierk/misc/qemu-linuxbios/qemu-piix-ram-size.patch
that together with
http://www.mail-archive.com/linuxbios@linuxbios.org/msg02390.html
(which is already in coreboot trunk) allows coreboot to autodetect the amount of RAM within qemu/kvm from a register in i440 northbridge.
The message on the old patch states:
Unfortunately the current version of qemu does not set these
registers, but I have patched qemu so that it emulates the i440 more
faithfully in this regard.
Signed-off-by: Bernhard M. Wiedemann <qemudevbmw@lsmod.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Don't do anything special for flush.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Implement P9_TREMOVE support.
This gets file deletion to work.
[mohan@in.ibm.com: Fix truncate to use the relative path]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Implement P9_TWRITE support.
This gets write to file to work
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Implement P9_TSTAT support. This get the mount to work on the guest.
[kiran@linux.vnet.ibm.com: malloc to qemu_malloc conversion]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Implement P9_TVERSION support.
[sripathik@in.ibm.com: Handle unknown 9P versions as per the standards]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add helpers to obtain file stat and mode details.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Helper APIs for FID and QID management.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add minimal set of FileOperations and the corresponding implementations for
local fstype. These will be required for the FID management patches later on.
[aneesh.kumar@linux.vnet.ibm.com: rpath fix ]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add helpers to do string manipulation.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add helpers to process the PDUs.
[kiran@linux.vnet.ibm.com: malloc to qemu_malloc coversion]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch doesn't implement the 9p protocol handling
code. It adds a simple device which dump the protocol data.
[jvrao@linux.vnet.ibm.com: Little-Endian to host format conversion]
[aneesh.kumar@linux.vnet.ibm.com: Multiple-mounts support]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch creates a new command line option named -fsdev to hold any file
system specific information.
The option will currently hold the following attributes:
-fsdev fstype id=id,path=path_to_share
where
fstype: Type of the file system.
id: Identifier used to refer to this fsdev
path: The path on the host that is identified by this fsdev.
[aneesh.kumar@linux.vnet.ibm.com: Abstraction using FsContext]
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the flush_queued_data() function, we expect port to be valid. Assert
only for port and not port || discard.
Reported-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The LSI controller was lacking a system reset handler. Simply invoke the
existing soft reset handler in this case. This also allows to drop its
explicit invocation during init.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid keeping zombie requests across controller reset by purging the
queue and also dropping the currently active request.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We cannot install different opaque pointer for read and write
of the same i/o address.
- handle zero address in bmdma_writeb_common and install
the same opaque pointer for both read and write access.
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Instead of doing tricks to get the pci_dev, just pass it in the 1st
place. Patch is a bit longer that reverting the pci_dev field, but it
states more clearly (IMHO) what we are doing.
It also fixes the bm test, now that you told me that ->unit is not
always valid.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Individual ports can now signal to the virtio-serial core to stop
sending data if the ports cannot immediately handle new data. When a
port later unthrottles, any data queued up in the virtqueue are sent to
the port.
Disable throttling once a port is closed (and we discard all the
unconsumed buffers in the vq).
The guest kernel can reclaim the buffers when it receives the port close
event or when a port is being removed. Ensure we free up the buffers
before we send out any events to the guest.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Before the earlier patch, we relied on incorrect virtio api usage to
signal to the guest that a particular buffer wasn't consumed by the
host.
After fixing that, we now just discard the data the guest sends us while
a host port is disconnected or doesn't have a handler registered for
consuming data.
This commit really doesn't change anything from the current behaviour,
just makes the code slightly better by spinning off data handling to
ports in another function.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We cannot indicate to the guest how much data was consumed by an app for
out_bufs. So we just have to assume the apps will consume all the data
that are handed over to them.
Fix the virtio api abuse in control_out() and handle_output().
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Current guests don't send more than one iov but it can change later.
Ensure we handle that case.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
CC: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Current control messages are small enough to not be split into multiple
buffers but we could run into such a situation in the future or a
malicious guest could cause such a situation.
So handle the entire iov request for control messages.
Also ensure the size of the control request is >= what we expect
otherwise we risk accessing memory that we don't own.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
CC: Avi Kivity <avi@redhat.com>
Reported-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
iov_to_buf() puts the buffer contents in the iov in a linearized buffer.
iov_size() gets the length of the contents in the iov.
The iov_to_buf() function is the memcpy_to_iovec() function that was
used in virtio-ballon.c.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The virtio-net code uses iov_fill() which fills an iov from a linear
buffer. The virtio-serial-bus code does something similar in an
open-coded function.
Create a new iov.c file that has iov_from_buf().
Convert virtio-net and virtio-serial-bus over to use this functionality.
virtio-net used ints to hold sizes, the new function is going to use
size_t types.
Later commits will add the opposite functionality -- going from an iov
to a linear buffer.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If adding of ports or devices in the guest fails we can send out a QMP
event so that management software can deal with it.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The check for a 0-sized write request to a guest port is not necessary;
the while loop below won't be executed in this case and all will be
fine.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The virtio-serial code doesn't mix declarations and definitions, so
separate them out on different lines.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow the port 'id's to be set by a user on the command line. This is
needed by management apps that will want a stable port numbering scheme
for hot-plug/unplug and migration.
Since the port numbers are shared with the guest (to identify ports in
control messages), we just send a control message to the guest
indicating addition of new ports (hot-plug) or notifying the guest of
the available ports when the guest sends us a DEVICE_READY control
message.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If the host connection to a port is closed on the destination machine
after migration, whereas the connection was open on the source, the
guest has to be informed of that.
Similar for a host connection open on the destination.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If some ports that were hot-plugged on the source are not available on
the destination, fail migration instead of trying to deref a NULL
pointer.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reported-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The number of ports on the source as well as the destination machines
should match. If they don't, it means some ports that got hotplugged on
the source aren't instantiated on the destination. Or that ports that
were hot-unplugged on the source are created on the destination.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reported-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The target could be started with max_nr_ports for a virtio-serial device
lesser than what was available on the source machine. Fail the migration
in such a case.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reported-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This clang error is harmless but worth fixing:
CC libhw32/rc4030.o
/src/qemu/hw/rc4030.c:244:66: error: if statement has empty body [-Wempty-body]
DPRINTF("read 0x%02x at " TARGET_FMT_plx "\n", val, addr);
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The bdrv_set_geometry_hint call below is not needed - it's just setting
what was just read.
Signed-off-by: Bruce Rogers <brogers@novell.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
What is known today as bdrv_open2 becomes the new bdrv_open. All remaining
callers of the old function are converted to the new one. In some places they
even know the right format, so they should have used bdrv_open2 from the
beginning.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To be able to use config files for blkdebug, we need to make these functions
available in the tools. This involves moving two functions that can only be
built in the context of the emulator.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix clang error:
CC bt-l2cap.o
/src/qemu/hw/bt-l2cap.c:1000:41: error: if statement has empty body
[-Wempty-body]
/* TODO: Signal an error? */;
This means that l2cap_sframe_in() may now get called.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Andrew Zaborowski <balrogg@gmail.com>
When looking down child bus, it should look parent bridge's
bus number, not child bus's.
Optimized tail recursion and style fix.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When qemu is invoked with an invalid initrd file, it crashes. Following
patch prints a error message and exits if an invalid initrd is
specified. Includes changes suggested by JV.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
virtio_blk_req_complete frees the request, so we can't access it any more when
calling bdrv_mon_event. Use the pointer that was copied earlier.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Both functions report errors nicely enough now, no need for additional
messages.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Note: our device unplug methods don't need conversion work, because
they can't currently fail.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
These clang errors are harmless but worth fixing:
CC ppc-softmmu/usb-ohci.o
/src/qemu/hw/usb-ohci.c:1104:59: error: if statement has empty body [-Wempty-body]
ohci->ctrl_head, ohci->ctrl_cur);
/src/qemu/hw/usb-ohci.c:1371:57: error: if statement has empty body [-Wempty-body]
DPRINTF("usb-ohci: port %d: SUSPEND\n", portnum);
CC sparc64-softmmu/translate.o
/src/qemu/target-sparc/translate.c:3173:37: error: if statement has empty body [-Wempty-body]
; // XXX
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
use empty_slot device for the RAM which is not installed
Models without ECC don't trap when missing ram is accessed.
v0->v1 compile only once and fix indentation
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The empty_slot device emulates known to a bus but not connected devices.
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These clang errors are harmless but worth fixing:
CC libhw64/fdc.o
/src/qemu/hw/fdc.c:998:74: error: if statement has empty body [-Wempty-body]
FLOPPY_DPRINTF("Floppy digital input register: 0x%02x\n", retval);
CC libhw64/cuda.o
/src/qemu/hw/cuda.c:320:66: error: if statement has empty body [-Wempty-body]
CUDA_DPRINTF("read: reg=0x%x val=%02x\n", (int)addr, val);
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
So the userspace headers define KERNEL_STRICT_NAMES and there's no
conflict on type definition for older kernels.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
vhost in current kernels doesn't support mergeable buffers.
Disable this feature if vhost is enabled, until such
support is implemented.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
vhost driver in qemu didn't ack features, and this happens
to work because we don't really require any features. However,
it's better not to rely on this. This patch passes features to
vhost as guest acks them.
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since commit 8da3ff1809 ("MMIO callback
interface changes"), the addresses passed to the I/O functions are an
offset to the start of the area. As a consequence, there is no need to
correct the address using the value of IOBR. This make possible the use
of the default MMIO functions. Moreover the addresses are now remaped
when the value if IOBR change.
The memory area corresponds to the devices behing the PCI bus, it should
not be mapped by the PCI controller. Remove the corresponding code.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
IDE and flash are part of the R2D board, and can't be removed. Emulate
them even if there is no hard-drive plugged to the IDE or if the flash
content is empty.
So the userspace headers define KERNEL_STRICT_NAMES and there's no
conflict on type definition for older kernels.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost in current kernels doesn't support mergeable buffers.
Disable this feature if vhost is enabled, until such
support is implemented.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost driver in qemu didn't ack features, and this happens
to work because we don't really require any features. However,
it's better not to rely on this. This patch passes features to
vhost as guest acks them.
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Using new pci_add_capability_at_offset makes
eepro100 code cleaner.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefan Weil <weil@mail.berlios.de>
Unlike virtio, device emulations need to add pci capabilities
at known offsets to match real hardware. Make this possible
by adding an appropriate API.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The guest may issue a RESET command for virtio. So far we didn't bother
to implement it, but with my new bootloader we actually need it for Linux
to get back to a safe state.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
With more files from outside the hw/ directory being placed into
libhw, avoid the need to include hw/hw.h for the sake of targ_phys_addr_t.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There was a pointer cast warning on Ubuntu since _FORTIFY_SOURCE has been reenabled.
_FORTIFY_SOURCE had been disabled by 4a24470497
and reenabled by 849583050d.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Some drivers seems to access the reserved register in bank 0 so allow and
ignore these accesses.
Signed-off-by: Lars Munch <lars@segv.dk>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
this fixes the smc91c111 emulation which has been broken for gumstix and
mainstone and maybe others since the "MMIO callback interface changes"
8da3ff1809 was commited.
Signed-off-by: Lars Munch <lars@segv.dk>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a destroy hook for the baum character device, to properly close the BrlAPI
connection.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The bochs vbe interface got a new register a while back, which specifies
the linear framebuffer size in 64k units. This patch adds support for
the new register to qemu. With this patch applied vgabios 0.6c works
with qemu.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 15e89f5916
removed this setting, but it is still needed.
Without this patch, e100 device drivers using
interrupts don't work with qemu.
See other nic emulations which also set the
PCI interrupt pin.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_add_capability automatically updates PCI status and
PCI capability pointer, so use it. Use pci_reserve_capability
to make the new capability appear at the correct offset.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For some devices, this bit is always set.
For the others, it is set by default.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This ethernet device is used in Toshiba Tecra 8200 notebooks.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
By using a private device info structure
(as suggested by Gerd Hoffmann), handling of the
different device variants becomes much easier.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
SCBStatus is readonly, but most drivers which were derived
from the old Linux eepro100.c do a word write to this address
when they want to acknowledge interrupts.
So we have to mask these writes here.
The patch also removes old unused code for status read / write.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move ARMv7-M PC/SP initialization to the CPU reset routine. Add a board
reset routine to call this. Also load values directly from ROM as
images have not been copied yet.
Avoid clearing the NVIC pointer on cpu reset.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Timer with zero period (free-run) will never match.
Timer counting starts with tick value of 0x200, not from 0,
so the period must calculated from one tick less than the limit.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
After commit 702f3e0fb5, the params is
nerver NULL. It should check *params instead of params to determine
whether the params is empty.
Signed-off-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
u_int64_t raises compiler error messages:
CC libhw32/virtio.o
/qemu/ar7/hw/virtio.c: In function ‘virtio_queue_get_avail_size’:
/qemu/ar7/hw/virtio.c:776: error: ‘u_int64_t’ undeclared (first use in this function)
/qemu/ar7/hw/virtio.c:776: error: (Each undeclared identifier is reported only once
/qemu/ar7/hw/virtio.c:776: error: for each function it appears in.)
Replacing u_int64_t by uint64_t helps.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This connects virtio-net to vhost net backend.
The code is structured in a way analogous to what we have with vnet
header capability in tap.
We start/stop backend on driver start/stop as
well as on save and vm start (for migration).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds vhost net device support in qemu. Will be tied to tap device
and virtio by following patches. Raw backend is currently missing,
will be worked on/submitted separately.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Support host/guest notifiers in virtio-pci.
The last one only with kvm, that's okay
because vhost relies on kvm anyway.
Note on kvm usage: kvm ioeventfd API
is implemented on non-kvm systems as well,
this is the reason we don't need if (kvm_enabled())
around it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
make it possible to use type without header include,
simplifying header dependencies.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
vhost net backend needs to be notified when
frontend status changes. Add a callback,
similar to set_features.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
vhost needs physical addresses for ring and other queue fields,
so add APIs for these. In particular, add binding API to set
host/guest notifiers. Will be used by vhost.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
event notifiers are slightly generalized eventfd descriptors. Current
implementation depends on eventfd because vhost is the only user, and
vhost depends on eventfd anyway, but a stub is provided for non-eventfd
case.
We'll be able to further generalize this when another user comes along
and we see how to best do this.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make vl.o compiled per target and fix a thinko in hw/acpi.c. It's not trivial
to make kvm.h consumable by compiled-once files.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Older Linux guests don't activate the bus master enable bit. So for those we
can just try to be clever and track if they set the DEVICE_OK bit even though
bus mastering is still disabled.
Under that condition we can disable the windows safety check. With that logic
in place both guests should work just fine. Without PCI hotplug breaks
virtio-net in Linux < 2.6.34 guests.
Signed-off-by: Alexander Graf <agraf@suse.de>
CC: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Mass Storage Reset and Get Max LUN are class specific requests, but
they were not marked as such in hw/usb-msd.c, moved therefore
ClassInterfaceRequest and ClassInterfaceOutRequest from hw/usb-net.c
to hw/usb.h.
Furthermore there was a problem in hw/usb-ohci.c when using DEBUG
concerning systems where size_t is a 32 bit integer (printf resulted
in a segmentation fault).
Signed-off-by: Max Reitz <max@tyndur.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Beginning with its introduction, the virtio balloon has had an overflow error
that causes 'info balloon' to misreport the actual memory size when the balloon
itself becomes larger than 4G. Use a cast when converting dev->actual from
pages to kB to prevent overflows.
Before:
(qemu) info balloon
balloon: actual=5120
(qemu) balloon 1025
(qemu) info balloon
balloon: actual=1025
(qemu) balloon 1024
(qemu) info balloon
balloon: actual=5120
After:
(qemu) info balloon
balloon: actual=5120
(qemu) balloon 1025
(qemu) info balloon
balloon: actual=1025
(qemu) balloon 1024
(qemu) info balloon
balloon: actual=1024
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Make win2k install hack unconditional as it is still restricted to
x86 only in vl.c.
Replace TARGET_PAGE_SIZE and 4096 with PAGE_SIZE.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This fixes a copy/paste bug introduced in commit
2d48377a85 that pushed TARGET_WORDS_BIGENDIAN
dependency to board level.
Signed-off-by: Lars Munch <lars@segv.dk>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Convert pci_host_conf_register_mmio_noswap(x) to
pci_host_conf_register_mmio(x, 0).
Convert pci_host_conf_register_mmio(x) to
pci_host_conf_register_mmio(x, 1) for big endian hosts, all cases
happen to be BE.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
x86 definitions (especially CPUState uses) prevent many files from
being compiled within libhw.
Move x86 specific declarations (APIC stuff) to a separate file.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This reverts commit d7234f4d7e.
Conflicts:
hw/xen_machine_pv.c
This should have never been committed.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All of these users have global state so we really don't see a benefit from
exit_notifier. However, using exit_notifier means that there's one less
justification for having global state in the first place.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
And convert usb-hid to use it (to avoid regression with bisection)
Right now, when we do info mice and we've added a usb tablet, we don't see it
until the guest starts using the tablet. We implement this behavior in order
to provide a means to delay registration of a mouse handler since we treat
the last registered handler as the current handler.
This is a usability problem though as we would like to give the user feedback
that they've either 1) not added an absolute device 2) there is an absolute
device but the guest isn't using it 3) we have an absolute device and it's
active.
By using QTAILQ and having an explicit activation function that moves the
handler to the front of the queue, we can implement the same semantics as
before with respect to automatically switching to usb tablet while providing
the user with a whole lot more information.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When building with -DNDEBUG, assert(0) will not stop execution
so it must not be used for abnormal termination.
Use cpu_abort() when in CPU context, abort() otherwise.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The usb-msd device emulation needs some small tweaks in the requests
emulations. For instance, the reset/maxlun requests are class/interface
specific so requests for them with the type class and recipient interface
bits sets have to be handled.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In case s->version is shorter than 4 bytes we overflow the memcpy src
buffer. Fix it by clearing the target buffer, then copy only the
amount of bytes we actually have.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Don't rely on CDROM hint for read_only attribute
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Just tell main_loop_wait whether to be blocking or nonblocking, so that
there is no need to call qemu_cpus_have_work from the timer subsystem.
Instead, tcg_cpu_exec can say "we want the main loop not to block because
we have stuff to do".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When working with the VM state (for loadvm/savevm and migration), it is not
valid to load and store pointers since the validity of those pointers cannot be
assured in the new qemu address space. Therefore, virtio_balloon_save() and
virtio_balloon_load() must not handle the stats-related fields in struct
VirtIOBalloon.
If a memory stats request is in-flight at the time of a migration or savevm,
the request will not complete and should be resubmitted once migration or
loadvm completes. Note that this extremely small race window can only be
triggered using QMP so it is not possible to hang the user monitor.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a logical block size attribute as various guest side tools only
increase the filesystem sector size based on it, not the advisory
physical block size.
For scsi we already have support for a different logical block size
in place for CDROMs that we can built upon. Only my recent block
device characteristics VPD page needs some fixups. Note that we
leave the logial block size for CDROMs hardcoded as the 2k value
is expected for it in general.
For virtio-blk we already have a feature flag claiming to support
a variable logical block size that was added for the s390 kuli
hypervisor. Interestingly it does not actually change the units
in which the protocol works, which is still fixed at 512 bytes,
but only communicates a different minimum I/O granularity. So
all we need to do in virtio is to add a trap for unaligned I/O
and round down the device size to the next multiple of the logical
block size.
IDE does not support any other logical block size than 512 bytes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Many usbdevice_init implementors assume params is non-NULL.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QEMU uses a fixed page size for the CPU TLB. If the guest uses large
pages then we effectively split these into multiple smaller pages, and
populate the corresponding TLB entries on demand.
When the guest invalidates the TLB by virtual address we must invalidate
all entries covered by the large page. However the address used to
invalidate the entry may not be present in the QEMU TLB, so we do not
know which regions to clear.
Implementing a full vaiable size TLB is hard and slow, so just keep a
simple address/mask pair to record which addresses may have been mapped by
large pages. If the guest invalidates this region then flush the
whole TLB.
Signed-off-by: Paul Brook <paul@codesourcery.com>
We sometimes permit omitting the first option name, for example
-device foo is short for -device driver=foo. The name to use
("driver" in the example) is passed as argument to qemu_opts_parse().
For each QemuOptsList, we use at most one such name.
Move the name into QemuOptsList, and pass whether to permit the
abbreviation. This ensures continued consistency, and simplifies the
commit after next in this series.
This reverts commit 3ced9f7a36.
The next commit will convert all of qdev_device_add() to QError, and
it'll be clearer with this partial conversion reverted.
Users can't set them, so qdev_device_help() shouldn't list them. Fix
that. Also make qdev_prop_parse() hide them instead of printing a
meaningless "has no parser" error message.
Their value means nothing to users, so qdev_print_props() shouldn't
print it. Fix by removing their print method.
Their only use is dirty hacks. Document that.
Users can't create them, so qdev_device_help() shouldn't list them.
Fix that.
Also make qdev_device_add() pretend they don't exist. Before, it
rejected them with a "can't be added via command line" message, which
wasn't quite right for monitor command device_add.
error_report() terminates the message with a newline. Strip it it
from its arguments.
This fixes a few error messages lacking a newline:
net_handle_fd_param()'s "No file descriptor named %s found", and
tap_open()'s "vnet_hdr=1 requested, but no kernel support for
IFF_VNET_HDR available" (all three versions).
There's one place that passes arguments without newlines
intentionally: load_vmstate(). Fix it up.
Commit 30d335d6 converted an informational message from
monitor_printf() to qemu_error(), probably because the latter doesn't
need a mon argument. A later commit will make qemu_error() print
additional stuff that is only appropriate for proper errors, and then
this will break. Clean it up.
qbus_find() adds an informational line to error messages, and prints
both lines with one qemu_error(). Use error_printf() for the
informational line instead.
While there, simplify: instead of printing buffers filled by
qbus_list_bus() and qbus_list_dev() in one go, make them print it.
qdev_device_help() prints device information with qemu_error(). A
later commit will make qemu_error() print additional stuff that is
only appropriate for proper errors, and then this will break. Use
error_printf() instead.
While there, simplify: instead of printing a buffer filled by
qdev_print_devinfo() in one go, make qdev_print_devinfo() print it.
The old test assumes that "hotplugged" implies "we have a current
monitor for reading the key". This is in fact true, but it's not
obviously true.
Aside: if it were false, we could pass a null pointer to
monitor_read_bdrv_key_start(), which would then crash.
The previous commit permits us to check for "we have a current
monitor" directly, so do that.
Code duplicated in commit 0ecdffbb. The two versions are similar, but
not identical:
* cmos_init() reports errors to stderr, pc_boot_set() via
qemu_error(). The latter is fine for both, so pick that for the
common code.
* cmos_init() obeys fd_bootchk, pc_boot_set() ignores it. Make it a
parameter of the common code.
Commit 0ecdffbb created pc_boot_set() for use from monitor command
"boot_set", via qemu_boot_set(). pc_boot_set() reports errors to
cur_mon, which works fine for monitor code.
Commit e0f084bf reused the function int reset handler
restore_boot_devices(). Use of cur_mon is problematic in that
context. For instance, the "Too many boot devices for PC" error for
"-boot order=abcdefgh,once=c" goes to the monitor instead of stderr.
The monitor may not even exist.
Fix by switching to qemu_error().
A few machines need to translate the ELF header addresses into physical
addresses. Currently the only possibility is to add a value to the
addresses.
This patch replaces the addend argument by and a translation function
and an opaque passed to the function. A NULL function does not translate
the address.
The patch also convert all machines that have an addend, simplify the
PowerPC kernel loading and fix the MIPS kernel loading using this new
feature. Other machines may benefit from this feature.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Real pcnet device (AT2450) apparently has subsystem
device and vendor id set to 0, this is out of spec
(which requires that vendor id is obtained from PCI SIG)
but windows xp driver seems to need this in order
to associate.
qemu sets pci subsystem id to qumranet/qemu
since d350d97d19,
debian does not yet have this patch.
https://bugzilla.redhat.com/show_bug.cgi?id=521247
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
eepro100 uses macros which rely on a specific
local variable name (pci_conf) which is scary.
Some of the uses are wrong or unnecessary,
remove them. The rest are small in number, open-code
them using pci_set_xx functions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
here's a trivial patch to fix the spelling of "compatibility":
Signed-off-by: Vagrant Cascadian <vagrant@freegeek.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix the floppy controller init wrappers to set the drive properties
only in case the DriveInfo pointers passed in are non NULL. This allows
to set the properties using -global.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
It's emitted whenever the watchdog device's timer expires. The action
taken is provided in the 'data' member.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add led status notification support to the usb kbd driver.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add led status notification support to the ps/2 kbd driver.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
You're supposed to use scsi-generic for that. Which rejects anything
but /dev/sg*.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Guest device and host netdev are peers, i.e. it's a 1:1 relation.
However, we fail to enforce that:
$ qemu -nodefaults --nographic -netdev user,id=net0 -device e1000,netdev=net0 -device virtio-net-pci,netdev=net0 -monitor stdio
QEMU 0.12.50 monitor - type 'help' for more information
(qemu) info network
Devices not on any VLAN:
net0: net=10.0.2.0, restricted=n peer=virtio-net-pci.0
e1000.0: model=e1000,macaddr=52:54:00:12:34:56 peer=net0
virtio-net-pci.0: model=virtio-net-pci,macaddr=52:54:00:12:34:57 peer=net0
It's all downhill from there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Property "vlan" reports "failed to parse" even when the value parses
just fine, but the result doesn't name an existing VLAN.
Similarly, properties "drive", "chr" and "netdev" misleadingly report
"failed to parse" when the value doesn't name an existing host device.
Change PropertyInfo method parse to return an error code, so that
qdev_prop_parse() can report the error more accurately.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use the named constant instead of -1.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reported-by: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
net.c used a constant to signify no MSI vectors were specified. Extend
that to all qdev devices.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reported-by: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
According to AMD document 21485D pp.141, APROMWE is bit 8 of BCR2.
Signed-off-by: Christopher Kilgour <techie@whiterocker.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The next commit will move the STOP event into do_vm_stop(), to
have the expected event sequence we need to emit the I/O error
event before calling vm_stop().
The expected sequence is:
{ "event": "BLOCK_IO_ERROR" [...] }
{ "event": "STOP" }
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Disable the MULTIPORT feature and MSI vectors for the 0.12 machine
types; those features are added only for 0.13 onwards.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a 0.12 machine type for compatibility with older versions. Mark the
default one as 0.13.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 428c149b0b modified the argument
that virtio_blk_init takes. Update the s390 bus code that calls this
function.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
UART_IIR_THRI is not a mask, but a possible value for the IIR ID.
Use UART_IIR_ID to extract this value.
Broken by commit 71e605f803.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
As we hard-wire the BSP to CPU 0 anyway and cpuid_apic_id equals
cpu_index, bsp_to_cpu can also be based on the latter directly. This
will help an early user of it: KVM while initializing mp_state.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This grand cleanup drops all reset and vmsave/load related
synchronization points in favor of four(!) generic hooks:
- cpu_synchronize_all_states in qemu_savevm_state_complete
(initial sync from kernel before vmsave)
- cpu_synchronize_all_post_init in qemu_loadvm_state
(writeback after vmload)
- cpu_synchronize_all_post_init in main after machine init
- cpu_synchronize_all_post_reset in qemu_system_reset
(writeback after system reset)
These writeback points + the existing one of VCPU exec after
cpu_synchronize_state map on three levels of writeback:
- KVM_PUT_RUNTIME_STATE (during runtime, other VCPUs continue to run)
- KVM_PUT_RESET_STATE (on synchronous system reset, all VCPUs stopped)
- KVM_PUT_FULL_STATE (on init or vmload, all VCPUs stopped as well)
This level is passed to the arch-specific VCPU state writing function
that will decide which concrete substates need to be written. That way,
no writer of load, save or reset functions that interact with in-kernel
KVM states will ever have to worry about synchronization again. That
also means that a lot of reasons for races, segfaults and deadlocks are
eliminated.
cpu_synchronize_state remains untouched, just as Anthony suggested. We
continue to need it before reading or writing of VCPU states that are
also tracked by in-kernel KVM subsystems.
Consequently, this patch removes many cpu_synchronize_state calls that
are now redundant, just like remaining explicit register syncs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instead of allocating a separate chunk for the first 640KB and another
for 1MB+, allocate one large chunk. This plays well in terms of alignment
and size with large pages.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
I always try to keep standard includes sorted
and add a comment why they are there (so they
can be removed when they are no longer needed).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
C++ comments are unwanted, so this is fixed here.
* Replace C++ comments by C comments.
* Put code which was deactivated by a C++ comment in #if 0...#endif.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Real hardware would run an internal self-test.
The emulation just returns a passed status.
Original patch was from Reimar Döffinger, thanks.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move code which reads the command block to the
new function read_cb. The patch also fixes some
endianess issues related to the command block
and moves declarations of local variables to
the beginning of the block.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no need for a local variable "status".
Using tx.status makes it clearer which status
is addressed.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CU Start is allowed when the CU is in the idle or suspended state.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The RNR interrupt is triggered under these conditions:
* the RU is not ready to receive a frame due to missing resources
* the RU is ready and a RU abort command was requested
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When compiling with -Wshadow, gcc gives a warning
which is fixed by renaming stat -> status.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of magic numbers like 0x8000, symbolic names are used
for the SCB command and status bits.
There are too many configuration bits to use symbolic names
there, too. Using the BIT macro is a little help when comparing
code and documentation.
For the same reason, some other constants were replaced by
the BITS macro.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add descriptions for all devices.
These descriptions are shown when users call
qemu -device ?
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Only two boot ROM files are needed for all devices.
* Add these GPXE ROM files using new naming convention
(as discussed on qemu-devel). Both files were created
with http://rom-o-matic.net/, PCI vendor / device ids
as in ROM filenames and option BANNER_TIMEOUT = 0.
* Remove old PXE ROM file for i82559er.
It was replaced by gpxe-eepro100-80861209.rom.
* Update pc-bios/README (and sort entries).
Full support still needs additional eepro100 fixes.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The phy handling was wrong for PXE, GPXE boot:
GPXE's eepro100 driver did not detect a valid link.
This is fixed here.
V2 - Use UPPER_CASE for enum values
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some system control block registers were addressed
using their offset value. Use symbolic names now
and clean the documentation.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When debug output was enabled (by defining DEBUG_EEPRO100),
some debug messages resulted in a compiler error.
This is fixed here.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move userland PALcode handling into linux-user main loop so that
we can send signals from there. This also makes alpha_palcode.c
system-level only, so don't build it for userland. Add defines
for GENTRAP PALcall mapping to signals.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since kernel uimage is getting bigger,
old fixed loading bases will result in regions overlap.
Add pad for fdt and ramdisk, so that they won't overlap with uimage.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
It's convinent to use rom to checking overlap, to reset etc.
And uImage and ramdisk loading has already moved to it.
Also, after we add fdt to rom, free it.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
So that the following registers init could be flushed back to kvm.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Hollis Blanchard <hollis@penguinppc.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If -usbdevice is used on a machine with no USB busses, usb_create
will fail and return NULL. Patch below handles this failure gracefully
rather than crashing when we try to init the device.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Add a QEMU timer only when needed (timeout status not set, timeout
irq wanted and timer set).
This patch is required for Darwin. Patch has been tested under
FreeBSD, Darwin and Linux.
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
o Implement receive overrun status. The FreeBSD uart driver
relies on this status in it's probe routine to determine the size
of the FIFO supported.
o As per the 16550 spec, do not overwrite the RX FIFO on an RX overrun.
o Do not allow TX or RX FIFO overruns to increment the data valid count
beyond the size of the FIFO.
o For reads of the IIR register, only clear the "TX holding register
emtpy interrupt" if the read reports this interrupt. This is required
by the specification and avoids losing TX interrupts when other,
higher priority interrupts (usually RX) are reported first.
Signed-off-by: Justin T. Gibbs <gibbs@FreeBSD.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pci_data_write ignores high 8 bit in address,
so there seems to be no need to set them
in apb_pci.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
cc1: warnings being treated as errors
/src/qemu/hw/pl181.c: In function 'pl181_fifo_run':
/src/qemu/hw/pl181.c:185: error: 'value' may be used uninitialized in this function
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The PL181 data transfer loop incorrectly terminates after the last FIFO
word is popped, discarding the last 3 bytes of data on a write transfer.
Signed-off-by: Paul Brook <paul@codesourcery.com>
/src/qemu/hw/ide/core.c: In function 'ide_drive_pre_save':
/src/qemu/hw/ide/core.c:2740: warning: comparison is always false due to limited range of data type
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
