The netdev reports NETDEV_STREAM_CONNECTED event when the backend
is connected, and NETDEV_STREAM_DISCONNECTED when it is disconnected.
The NETDEV_STREAM_CONNECTED event includes the destination address.
This allows a system manager like libvirt to detect when the server
fails.
For instance with passt:
{ 'execute': 'qmp_capabilities' }
{ "return": { } }
{ "timestamp": { "seconds": 1666341395, "microseconds": 505347 },
"event": "NETDEV_STREAM_CONNECTED",
"data": { "netdev-id": "netdev0",
"addr": { "path": "/tmp/passt_1.socket", "type": "unix" } } }
[killing passt here]
{ "timestamp": { "seconds": 1666341430, "microseconds": 968694 },
"event": "NETDEV_STREAM_DISCONNECTED",
"data": { "netdev-id": "netdev0" } }
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com> (QAPI schema)
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com> (QAPI schema)
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Copied from socket netdev file and modified to use SocketAddress
to be able to introduce new features like unix socket.
"udp" and "mcast" are squashed into dgram netdev, multicast is detected
according to the IP address type.
"listen" and "connect" modes are managed by stream netdev. An optional
parameter "server" defines the mode (off by default)
The two new types need to be parsed the modern way with -netdev, because
with the traditional way, the "type" field of netdev structure collides with
the "type" field of SocketAddress and prevents the correct evaluation of the
command line option. Moreover the traditional way doesn't allow to use
the same type (SocketAddress) several times with the -netdev option
(needed to specify "local" and "remote" addresses).
The previous commit paved the way for parsing the modern way, but
omitted one detail: how to pick modern vs. traditional, in
netdev_is_modern().
We want to pick based on the value of parameter "type". But how to
extract it from the option argument?
Parsing the option argument, either the modern or the traditional way,
extracts it for us, but only if parsing succeeds.
If parsing fails, there is no good option. No matter which parser we
pick, it'll be the wrong one for some arguments, and the error
reporting will be confusing.
Fortunately, the traditional parser accepts *anything* when called in
a certain way. This maximizes our chance to extract the value of
"type", and in turn minimizes the risk of confusing error reporting.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Similar to other vhost backends, vhostfd can be passed to vhost-vdpa
backend as another parameter to instantiate vhost-vdpa net client.
This would benefit the use case where only open file descriptors, as
opposed to raw vhost-vdpa device paths, are accessible from the QEMU
process.
(qemu) netdev_add type=vhost-vdpa,vhostfd=61,id=vhost-vdpa1
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Snapshot loading only expects to call deterministic handlers, not
non-deterministic ones. So introduce a way of registering handlers that
won't be called when reseting for snapshots.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-id: 20221025004327.568476-2-Jason@zx2c4.com
[PMM: updated json doc comment with Markus' text; fixed
checkpatch style nit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's allow for specifying a thread context via the "prealloc-context"
property. When set, preallcoation threads will be crated via the
thread context -- inheriting the same CPU affinity as the thread
context.
Pinning preallcoation threads to CPUs can heavily increase performance
in NUMA setups, because, preallocation from a CPU close to the target
NUMA node(s) is faster then preallocation from a CPU further remote,
simply because of memory bandwidth for initializing memory with zeroes.
This is especially relevant for very large VMs backed by huge/gigantic
pages, whereby preallocation is mandatory.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20221014134720.168738-7-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's make it easier to pin threads created via a ThreadContext to
all host CPUs currently belonging to a given set of host NUMA nodes --
which is the common case.
"node-affinity" is simply a shortcut for setting "cpu-affinity" manually
to the list of host CPUs belonging to the set of host nodes. This property
can only be written.
A simple QEMU example to set the CPU affinity to host node 1 on a system
with two nodes, 24 CPUs each, whereby odd-numbered host CPUs belong to
host node 1:
qemu-system-x86_64 -S \
-object thread-context,id=tc1,node-affinity=1
And we can query the cpu-affinity via HMP/QMP:
(qemu) qom-get tc1 cpu-affinity
[
1,
3,
5,
7,
9,
11,
13,
15,
17,
19,
21,
23,
25,
27,
29,
31,
33,
35,
37,
39,
41,
43,
45,
47
]
We cannot query the node-affinity:
(qemu) qom-get tc1 node-affinity
Error: Insufficient permission to perform this operation
But note that due to dynamic library loading this example will not work
before we actually make use of thread_context_create_thread() in QEMU
code, because the type will otherwise not get registered. We'll wire
this up next to make it work.
Note that if the host CPUs for a host node change due do CPU hot(un)plug
CPU onlining/offlining (i.e., lscpu output changes) after the ThreadContext
was started, the CPU affinity will not get updated.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221014134720.168738-5-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Setting the CPU affinity of QEMU threads is a bit problematic, because
QEMU doesn't always have permissions to set the CPU affinity itself,
for example, with seccomp after initialized by QEMU:
-sandbox enable=on,resourcecontrol=deny
General information about CPU affinities can be found in the man page of
taskset:
CPU affinity is a scheduler property that "bonds" a process to a given
set of CPUs on the system. The Linux scheduler will honor the given CPU
affinity and the process will not run on any other CPUs.
While upper layers are already aware of how to handle CPU affinities for
long-lived threads like iothreads or vcpu threads, especially short-lived
threads, as used for memory-backend preallocation, are more involved to
handle. These threads are created on demand and upper layers are not even
able to identify and configure them.
Introduce the concept of a ThreadContext, that is essentially a thread
used for creating new threads. All threads created via that context
thread inherit the configured CPU affinity. Consequently, it's
sufficient to create a ThreadContext and configure it once, and have all
threads created via that ThreadContext inherit the same CPU affinity.
The CPU affinity of a ThreadContext can be configured two ways:
(1) Obtaining the thread id via the "thread-id" property and setting the
CPU affinity manually (e.g., via taskset).
(2) Setting the "cpu-affinity" property and letting QEMU try set the
CPU affinity itself. This will fail if QEMU doesn't have permissions
to do so anymore after seccomp was initialized.
A simple QEMU example to set the CPU affinity to host CPU 0,1,6,7 would be:
qemu-system-x86_64 -S \
-object thread-context,id=tc1,cpu-affinity=0-1,cpu-affinity=6-7
And we can query it via HMP/QMP:
(qemu) qom-get tc1 cpu-affinity
[
0,
1,
6,
7
]
But note that due to dynamic library loading this example will not work
before we actually make use of thread_context_create_thread() in QEMU
code, because the type will otherwise not get registered. We'll wire
this up next to make it work.
In general, the interface behaves like pthread_setaffinity_np(): host
CPU numbers that are currently not available are ignored; only host CPU
numbers that are impossible with the current kernel will fail. If the
list of host CPU numbers does not include a single CPU that is
available, setting the CPU affinity will fail.
A ThreadContext can be reused, simply by reconfiguring the CPU affinity.
Note that the CPU affinity of previously created threads will not get
adjusted.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221014134720.168738-4-david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
libblkio (https://gitlab.com/libblkio/libblkio/) is a library for
high-performance disk I/O. It currently supports io_uring,
virtio-blk-vhost-user, and virtio-blk-vhost-vdpa with additional drivers
under development.
One of the reasons for developing libblkio is that other applications
besides QEMU can use it. This will be particularly useful for
virtio-blk-vhost-user which applications may wish to use for connecting
to qemu-storage-daemon.
libblkio also gives us an opportunity to develop in Rust behind a C API
that is easy to consume from QEMU.
This commit adds io_uring, nvme-io_uring, virtio-blk-vhost-user, and
virtio-blk-vhost-vdpa BlockDrivers to QEMU using libblkio. It will be
easy to add other libblkio drivers since they will share the majority of
code.
For now I/O buffers are copied through bounce buffers if the libblkio
driver requires it. Later commits add an optimization for
pre-registering guest RAM to avoid bounce buffers.
The syntax is:
--blockdev io_uring,node-name=drive0,filename=test.img,readonly=on|off,cache.direct=on|off
--blockdev nvme-io_uring,node-name=drive0,filename=/dev/ng0n1,readonly=on|off,cache.direct=on
--blockdev virtio-blk-vhost-vdpa,node-name=drive0,path=/dev/vdpa...,readonly=on|off,cache.direct=on
--blockdev virtio-blk-vhost-user,node-name=drive0,path=vhost-user-blk.sock,readonly=on|off,cache.direct=on
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20221013185908.1297568-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
To save the FDT blob we have the '-machine dumpdtb=<file>' property.
With this property set, the machine saves the FDT in <file> and exit.
The created file can then be converted to plain text dts format using
'dtc'.
There's nothing particularly sophisticated into saving the FDT that
can't be done with the machine at any state, as long as the machine has
a valid FDT to be saved.
The 'dumpdtb' command receives a 'filename' parameter and, if the FDT is
available via current_machine->fdt, save it in dtb format to 'filename'.
In short, this is a '-machine dumpdtb' that can be fired on demand via
QMP/HMP.
This command will always be executed in-band (i.e. holding BQL),
avoiding potential race conditions with machines that might change the
FDT during runtime (e.g. PowerPC 'pseries' machine).
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-2-danielhb413@gmail.com>
The patch adds "show_menubar" command line option for GTK UI similar to
"show_tabs". This option allows to hide menu bar initially, it still can
be toggled by shortcut and other shortcuts still work.
Signed-off-by: Bryce Mills <brycemills@proton.me>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <NWO_zx1CT5Aj9vAXsRlqBppXd63gcKwL9V1qM1Meh36M_9tCw-EsCnfpvONXhHjmtKIUoSuCy9OO6cHS7M8b0oHBOCZG6f1jZ4Q2tqgI2Qo=@proton.me>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are cases that malicious virtual machine can cause CPU stuck (due
to event windows don't open up), e.g., infinite loop in microcode when
nested #AC (CVE-2015-5307). No event window means no event (NMI, SMI and
IRQ) can be delivered. It leads the CPU to be unavailable to host or
other VMs. Notify VM exit is introduced to mitigate such kind of
attacks, which will generate a VM exit if no event window occurs in VM
non-root mode for a specified amount of time (notify window).
A new KVM capability KVM_CAP_X86_NOTIFY_VMEXIT is exposed to user space
so that the user can query the capability and set the expected notify
window when creating VMs. The format of the argument when enabling this
capability is as follows:
Bit 63:32 - notify window specified in qemu command
Bit 31:0 - some flags (e.g. KVM_X86_NOTIFY_VMEXIT_ENABLED is set to
enable the feature.)
Users can configure the feature by a new (x86 only) accel property:
qemu -accel kvm,notify-vmexit=run|internal-error|disable,notify-window=n
The default option of notify-vmexit is run, which will enable the
capability and do nothing if the exit happens. The internal-error option
raises a KVM internal error if it happens. The disable option does not
enable the capability. The default value of notify-window is 0. It is valid
only when notify-vmexit is not disabled. The valid range of notify-window
is non-negative. It is even safe to set it to zero since there's an
internal hardware threshold to be added to ensure no false positive.
Because a notify VM exit may happen with VM_CONTEXT_INVALID set in exit
qualification (no cases are anticipated that would set this bit), which
means VM context is corrupted. It would be reflected in the flags of
KVM_EXIT_NOTIFY exit. If KVM_NOTIFY_CONTEXT_INVALID bit is set, raise a KVM
internal error unconditionally.
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20220929072014.20705-5-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This new command shows the information of a VirtQueue element.
[Note: Up until v10 of this patch series, virtio.json had many (15+)
enums defined (e.g. decoded device features, statuses, etc.). In v10
most of these enums were removed and replaced with string literals.
By doing this we get (1) simpler schema, (2) smaller generated code,
and (3) less maintenance burden for when new things are added (e.g.
devices, device features, etc.).]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-6-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These new commands show the internal status of a VirtIODevice's
VirtQueue and a vhost device's vhost_virtqueue (if active).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-5-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Display feature names instead of bitmaps for host, guest, and
backend for VirtIODevices.
Display status names instead of bitmaps for VirtIODevices.
Display feature names instead of bitmaps for backend, protocol,
acked, and features (hdev->features) for vhost devices.
Decode features according to device ID. Decode statuses
according to configuration status bitmap (config_status_map).
Decode vhost user protocol features according to vhost user
protocol bitmap (vhost_user_protocol_map).
Transport features are on the first line. Undecoded bits (if
any) are stored in a separate field.
[Jonah: Several changes made to this patch from prev. version (v14):
- Moved all device features mappings to hw/virtio/virtio.c
- Renamed device features mappings (less generic)
- Generalized @FEATURE_ENTRY macro for all device mappings
- Virtio device feature map definitions include descriptions of
feature bits
- Moved @VHOST_USER_F_PROTOCOL_FEATURES feature bit from transport
feature map to vhost-user-supported device feature mappings
(blk, fs, i2c, rng, net, gpu, input, scsi, vsock)
- New feature bit added for virtio-vsock: @VIRTIO_VSOCK_F_SEQPACKET
- New feature bit added for virtio-iommu: @VIRTIO_IOMMU_F_BYPASS_CONFIG
- New feature bit added for virtio-mem: @VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE
- New virtio transport feature bit added: @VIRTIO_F_IN_ORDER
- Added device feature map definition for virtio-rng
]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-4-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This new command shows the status of a VirtIODevice, including
its corresponding vhost device's status (if active).
Next patch will improve output by decoding feature bits, including
vhost device's feature bits (backend, protocol, acked, and features).
Also will decode status bits of a VirtIODevice.
[Jonah: From patch v12; added a check to @virtio_device_find to ensure
synchronicity between @virtio_list and the devices in the QOM
composition tree.]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-3-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This new command lists all the instances of VirtIODevices with
their canonical QOM path and name.
[Jonah: @virtio_list duplicates information that already exists in
the QOM composition tree. However, extracting necessary information
from this tree seems to be a bit convoluted.
Instead, we still create our own list of realized virtio devices
but use @qmp_qom_get with the device's canonical QOM path to confirm
that the device exists and is realized. If the device exists but
is actually not realized, then we remove it from our list (for
synchronicity to the QOM composition tree).
Also, the QMP command @x-query-virtio is redundant as @qom-list
and @qom-get are sufficient to search '/machine/' for realized
virtio devices. However, @x-query-virtio is much more convenient
in listing realized virtio devices.]
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1660220684-24909-2-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit b652293832.
Kevin Wolf NAKed this patch, because:
'file' is a required member (defined in BlockdevOptionsGenericFormat),
removing it makes the example invalid. 'data-file' is only an additional
optional member to be used for external data files (i.e. when the guest
data is kept separate from the metadata in the .qcow2 file).
However, it had already been merged then. Revert.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220930171908.846769-1-armbru@redhat.com>
Reviewed-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
sndio is the native API used by OpenBSD, although it has been ported to
other *BSD's and Linux (packages for Ubuntu, Debian, Void, Arch, etc.).
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Alexandre Ratchov <alex@caoua.org>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Tested-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <YxibXrWsrS3XYQM3@vm1.arverb.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I've used real timestamp and changing them one by one so they would
not be all equal.
Problem was noticed when using the example as a test case for Go
bindings.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-11-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The example return type has the wrong member name. Fix it.
Problem was noticed when using the example as a test case for Go
bindings.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-10-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The examples use "qcow2" driver with the wrong member name for
BlockdevRef alternate type. This patch changes all wrong member names
from "file" to "data-file" which is the correct member name in
BlockdevOptionsQcow2 for the BlockdevRef field.
Problem was noticed when using the example as a test case for Go
bindings.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-9-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Example output was missing ',' delimiter. Fix it.
Problem was noticed when trying to load the example into python's json
library.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-8-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Example output is missing a ',' delimiter and it has an extra ending
curly bracket. Fix it.
Problem was noticed when trying to load the example into python's json
library.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-7-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Example output has an extra ending curly bracket. Fix it.
Problem was noticed when trying to load the example into python's json
library.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-6-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Example output is missing ',' delimiter. Fix it.
Problem was noticed when trying to load the example into python's json
library.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-5-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Example output is missing closing curly brackets. Fix it.
Problem was noticed when trying to load the example into python's json
library.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-4-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Example output has an extra ',' delimiter in member "websocket" and it
lacks it in "family" member. Fix it.
Problem was noticed when trying to load the example into python's json
library.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-3-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Example output has an extra ',' delimiter. Fix it.
Problem was noticed when trying to load the example into python's json
library.
Signed-off-by: Victor Toso <victortoso@redhat.com>
Message-Id: <20220901085840.22520-2-victortoso@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Currently QEMU exits with code 0 on both panic an shutdown. For tests
it is useful to return 1 on panic, so that it counts as a test
failure.
Introduce a new exit-failure PanicAction that makes main() return
EXIT_FAILURE. Tests can use -action panic=exit-failure option to
activate this behavior.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220725223746.227063-2-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This replaces yesterdays pull and:
a) Fixes some test build errors without TLS
b) Reenabled the zlib acceleration on s390
now that we have Ilya's fix
Hyman's dirty page rate limit set
Ilya's fix for zlib vs migration
Peter's postcopy-preempt
Cleanup from Dan
zero-copy tidy ups from Leo
multifd doc fix from Juan
Revert disable of zlib acceleration on s390x
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=wiSA
-----END PGP SIGNATURE-----
Merge tag 'pull-migration-20220720c' of https://gitlab.com/dagrh/qemu into staging
Migration pull 2022-07-20
This replaces yesterdays pull and:
a) Fixes some test build errors without TLS
b) Reenabled the zlib acceleration on s390
now that we have Ilya's fix
Hyman's dirty page rate limit set
Ilya's fix for zlib vs migration
Peter's postcopy-preempt
Cleanup from Dan
zero-copy tidy ups from Leo
multifd doc fix from Juan
Revert disable of zlib acceleration on s390x
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Wed 20 Jul 2022 12:18:56 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* tag 'pull-migration-20220720c' of https://gitlab.com/dagrh/qemu: (30 commits)
Revert "gitlab: disable accelerated zlib for s390x"
migration: Avoid false-positive on non-supported scenarios for zero-copy-send
multifd: Document the locking of MultiFD{Send/Recv}Params
migration/multifd: Report to user when zerocopy not working
Add dirty-sync-missed-zero-copy migration stat
QIOChannelSocket: Fix zero-copy flush returning code 1 when nothing sent
migration: remove unreachable code after reading data
tests: Add postcopy preempt tests
tests: Add postcopy tls recovery migration test
tests: Add postcopy tls migration test
tests: Move MigrateCommon upper
migration: Respect postcopy request order in preemption mode
migration: Enable TLS for preempt channel
migration: Export tls-[creds|hostname|authz] params to cmdline too
migration: Add helpers to detect TLS capability
migration: Add property x-postcopy-preempt-break-huge
migration: Create the postcopy preempt channel asynchronously
migration: Postcopy recover with preempt enabled
migration: Postcopy preemption enablement
migration: Postcopy preemption preparation on channel creation
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220711211112.18951-3-leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Firstly, postcopy already preempts precopy due to the fact that we do
unqueue_page() first before looking into dirty bits.
However that's not enough, e.g., when there're host huge page enabled, when
sending a precopy huge page, a postcopy request needs to wait until the whole
huge page that is sending to finish. That could introduce quite some delay,
the bigger the huge page is the larger delay it'll bring.
This patch adds a new capability to allow postcopy requests to preempt existing
precopy page during sending a huge page, so that postcopy requests can be
serviced even faster.
Meanwhile to send it even faster, bypass the precopy stream by providing a
standalone postcopy socket for sending requested pages.
Since the new behavior will not be compatible with the old behavior, this will
not be the default, it's enabled only when the new capability is set on both
src/dst QEMUs.
This patch only adds the capability itself, the logic will be added in follow
up patches.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220707185342.26794-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Implement dirtyrate calculation periodically basing on
dirty-ring and throttle virtual CPU until it reachs the quota
dirty page rate given by user.
Introduce qmp commands "set-vcpu-dirty-limit",
"cancel-vcpu-dirty-limit", "query-vcpu-dirty-limit"
to enable, disable, query dirty page limit for virtual CPU.
Meanwhile, introduce corresponding hmp commands
"set_vcpu_dirty_limit", "cancel_vcpu_dirty_limit",
"info vcpu_dirty_limit" so the feature can be more usable.
"query-vcpu-dirty-limit" success depends on enabling dirty
page rate limit, so just add it to the list of skipped
command to ensure qmp-cmd-test run successfully.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <4143f26706d413dd29db0b672fe58b3d3fbe34bc.1656177590.git.huangy81@chinatelecom.cn>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Finally offering the possibility to enable SVQ from the command line.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The patch adds "show_tabs" command line option for GTK ui similar to
"grab_on_hover". This option allows tabbed view mode to not have to be
enabled by hand at each start of the VM.
Signed-off-by: Felix "xq" Queißner <xq@random-projects.net>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220712133753.18937-1-xq@random-projects.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The next version of Linux will introduce boolean statistics, which
can only have 0 or 1 values. Support them in the schema and in
the HMP command.
Suggested-by: Amneesh Singh <natto@weirdnatto.in>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some scenarios, when copy-before-write operations lasts too long
time, it's better to cancel it.
Most useful would be to use the new option together with
on-cbw-error=break-snapshot: this way if cbw operation takes too long
time we'll just cancel backup process but do not disturb the guest too
much.
Note the tricky point of realization: we keep additional point in
bs->in_flight during block_copy operation even if it's timed-out.
Background "cancelled" block_copy operations will finish at some point
and will want to access state. We should care to not free the state in
.bdrv_close() earlier.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
[vsementsov: use bdrv_inc_in_flight()/bdrv_dec_in_flight() instead of
direct manipulation on bs->in_flight]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Inspired by Julia Lawall's fixing of Linux
kernel comments, I looked at qemu, although I did it manually.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220614104045.85728-2-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Currently, behavior on copy-before-write operation failure is simple:
report error to the guest.
Let's implement alternative behavior: break the whole copy-before-write
process (and corresponding backup job or NBD client) but keep guest
working. It's needed if we consider guest stability as more important.
The realisation is simple: on copy-before-write failure we set
s->snapshot_ret and continue guest operations. s->snapshot_ret being
set will lead to all further snapshot API requests. Note that all
in-flight snapshot-API requests may still success: we do wait for them
on BREAK_SNAPSHOT-failure path in cbw_do_copy_before_write().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
