When PAGE_RESET is set, we are replacing pages with new
content, which means that we need to invalidate existing
cached data, such as TranslationBlocks. Perform the
reset invalidate while we're doing other invalidates,
which allows us to remove the separate invalidates from
the user-only mmap/munmap/mprotect routines.
In addition, restrict invalidation to PAGE_EXEC pages.
Since cdf7130851, we have validated PAGE_EXEC is present
before translation, which means we can assume that if the
bit is not present, there are no translations to invalidate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the emulation stops with a hard exception it's very useful for
debugging purposes to dump the current guest memory layout (for an
example see /proc/self/maps) beside the CPU registers.
The open_self_maps() function provides such a memory dump, but since
it's located in the syscall.c file, various changes (add #includes, make
this function externally visible, ...) are needed to be able to call it
from the existing EXCP_DUMP() macro.
This patch takes another approach by re-defining EXCP_DUMP() to call
target_exception_dump(), which is in syscall.c, consolidates the log
print functions and allows to add the call to dump the memory layout.
Beside a reduced code footprint, this approach keeps the changes across
the various callers minimal, and keeps EXCP_DUMP() highlighted as
important macro/function.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <Y1bzAWbw07WBKPxw@p100>
[lv: remove pc declaration and setting]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
User space has been preferring this syscall for a while, due to its
closer match with C semantics, and newer platforms such as LoongArch
apparently have libc implementations that don't fallback to faccessat
so normal access checks are failing without the emulation in place.
Tested by successfully emerging several packages within a Gentoo loong
stage3 chroot, emulated on amd64 with help of static qemu-loongarch64.
Reported-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Message-Id: <20221009060813.2289077-1-xen0n@gentoo.org>
[lv: removing defined(__NR_faccessat2) in syscall.c,
adding defined(TARGET_NR_faccessat2) on print_faccessat()]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These ioctls have been defined in linux/fs.h for a long time
* BLKGETSIZE64 - <2.6.12 (linux.git epoch)
* BLKDISCARD - 2.6.28 (d30a2605be9d5132d95944916e8f578fcfe4f976)
* BLKIOMIN - 2.6.32 (ac481c20ef8f6c6f2be75d581863f40c43874ef7)
* BLKIOOPT - 2.6.32 (ac481c20ef8f6c6f2be75d581863f40c43874ef7)
* BLKALIGNOFF - 2.6.32 (ac481c20ef8f6c6f2be75d581863f40c43874ef7)
* BLKPBSZGET - 2.6.32 (ac481c20ef8f6c6f2be75d581863f40c43874ef7)
* BLKDISCARDZEROES - 2.6.32 (98262f2762f0067375f83824d81ea929e37e6bfe)
* BLKSECDISCARD - 2.6.36 (8d57a98ccd0b4489003473979da8f5a1363ba7a3)
* BLKROTATIONAL - 3.2 (ef00f59c95fe6e002e7c6e3663cdea65e253f4cc)
* BLKZEROOUT - 3.6 (66ba32dc167202c3cf8c86806581a9393ec7f488)
* FIBMAP - <2.6.12 (linux.git epoch)
* FIGETBSZ - <2.6.12 (linux.git epoch)
and when building with latest glibc, we'll see compat definitions
in syscall.c anyway thanks to the previous patch. Thus we can
assume they always exist and remove the conditional checks.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221004093206.652431-3-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
GLibc changes prevent us from including linux/fs.h anymore,
and we previously adjusted to this in
commit 3cd3df2a95
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Tue Aug 2 12:41:34 2022 -0400
linux-user: fix compat with glibc >= 2.36 sys/mount.h
That change required adding compat ioctl definitions on the
QEMU side for any ioctls that we would otherwise obtain
from linux/fs.h. This commit adds more that were initially
missed, due to their usage being conditionalized in QEMU.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221004093206.652431-2-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
AT_EXECFD gives access to the binary file even if
it is not readable (only executable).
Moreover it can be opened with flags and mode that are not the ones
provided by do_openat() caller.
And it is not available because loader_exec() has closed it.
To avoid that, use only safe_openat() with the exec_path.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220927124357.688536-3-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If path is /proc/self/exe, use the executable path
provided by exec_path.
Don't use execfd as it is closed by loader_exec() and otherwise
will survive to the exec() syscall and be usable child process.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220927124357.688536-2-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In commit 80f0fe3a85 ("linux-user: Fix syscall parameter handling for
MIPS n32") the ABI problem regarding offset64 on MIPS n32 was fixed,
but still some cases remain where the n32 is incorrectly treated as any
other 32-bit ABI that passes 64-bit arguments in pairs of GPRs. Fix by
excluding TARGET_ABI_MIPSN32 from various TARGET_ABI_BITS == 32 checks.
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1238
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Andreas K. Hüttel <dilfridge@gentoo.org>
Cc: Joshua Kinard <kumba@gentoo.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Andreas K. Huettel <dilfridge@gentoo.org>
Message-Id: <20221006085500.290341-1-xen0n@gentoo.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Previously the 32-bit version was incorrectly chosen, leading to funny
but incorrect output from e.g. df(1). Simply select the version
corresponding to the 64-bit asm-generic definition.
For reference, this program should produce the same output no matter
natively compiled or not, for loongarch64 or not:
```c
#include <stdio.h>
#include <sys/statfs.h>
int main(int argc, const char *argv[])
{
struct statfs b;
if (statfs(argv[0], &b))
return 1;
printf("f_type = 0x%lx\n", b.f_type);
printf("f_bsize = %ld\n", b.f_bsize);
printf("f_blocks = %ld\n", b.f_blocks);
printf("f_bfree = %ld\n", b.f_bfree);
printf("f_bavail = %ld\n", b.f_bavail);
return 0;
}
// Example output on my amd64 box, with the test binary residing on a
// btrfs partition.
// Native and emulated output after the fix:
//
// f_type = 0x9123683e
// f_bsize = 4096
// f_blocks = 268435456
// f_bfree = 168406890
// f_bavail = 168355058
// Output before the fix, note the messed layout:
//
// f_type = 0x10009123683e
// f_bsize = 723302085239504896
// f_blocks = 168355058
// f_bfree = 2250817541779750912
// f_bavail = 1099229433104
```
Fixes: 1f63019632 ("linux-user: Add LoongArch syscall support")
Signed-off-by: WANG Xuerui <xen0n@gentoo.org>
Cc: Song Gao <gaosong@loongson.cn>
Cc: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Cc: Andreas K. Hüttel <dilfridge@gentoo.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Andreas K. Huettel <dilfridge@gentoo.org>
Message-Id: <20221006100710.427252-1-xen0n@gentoo.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add support for saving/restoring extended save states when signals
are delivered. This allows using AVX, MPX or PKRU registers in
signal handlers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux can use FXSAVE to save/restore XMM registers even on 32-bit
systems. This requires some care in order to keep the FXSAVE area
aligned to 16 bytes; for this reason, get_sigframe is changed to
pass the offset into the FXSAVE area rather than the full frame
size.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent versions of Linux moved the 32-bit fpstate towards the end of the
frame, so that the variable-sized xsave data does not overwrite the
(ABI-defined) extramask[] field. Follow suit in QEMU.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Special care needs to be taken in ensuring locks are in a consistent
state across fork events. Add helpers so the plugin system can ensure
that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/358
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221004115221.2174499-1-alex.bennee@linaro.org>
The value previously chosen overlaps GUSA_MASK.
Rename all DELAY_SLOT_* and GUSA_* defines to emphasize
that they are included in TB_FLAGs. Add aliases for the
FPSCR and SR bits that are included in TB_FLAGS, so that
we don't accidentally reassign those bits.
Fixes: 4da06fb306 ("target/sh4: Implement prctl_unalign_sigbus")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/856
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not allow syscall arguments to be interleaved between threads.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220829021006.67305-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use a table for the names; print unknown values in hex,
since the value contains flags.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220829021006.67305-7-richard.henderson@linaro.org>
[lv: update print_futex() according to
"linux-user: Show timespec on strace for futex()"]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The val argument to FUTEX_FD is a signal number. Convert to match
the host, as it will be converted back when the signal is delivered.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220829021006.67305-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Leave only the argument adjustments within the shift,
and sink the actual syscall to the end. Sink the
timespec conversion as well, as there will be more users.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220829021006.67305-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Pass a boolean to select between time32 and time64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220829021006.67305-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Match most appropriate base platform string based on insn_flags.
Logic is aligned with aligned with set_isa() from
arch/mips/kernel/cpu-probe.c in Linux kernel.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220803103009.95972-3-jiaxun.yang@flygoat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
AT_BASE_PLATFORM is a elf auxiliary vector pointing to a string
to pass some architecture information.
See getauxval(3) man-page.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220803103009.95972-2-jiaxun.yang@flygoat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Linux kernel does this in fpregs_store() and fpregs_load(), so
qemu-user should do this as well.
Found by running valgrind's none/tests/s390x/test_sig.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220817123902.585623-1-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
For handling guest POSIX timers, we currently use an array
g_posix_timers[], whose entries are a host timer_t value, or 0 for
"this slot is unused". When the guest calls the timer_create syscall
we look through the array for a slot containing 0, and use that for
the new timer.
This scheme assumes that host timer_t values can never be zero. This
is unfortunately not a valid assumption -- for some host libc
versions, timer_t values are simply indexes starting at 0. When
using this kind of host libc, the effect is that the first and second
timers end up sharing a slot, and so when the guest tries to operate
on the first timer it changes the second timer instead.
Rework the timer allocation code, so that:
* the 'slot in use' indication uses a separate array from the
host timer_t array
* we grab the free slot atomically, to avoid races when multiple
threads call timer_create simultaneously
* releasing an allocated slot is abstracted out into a new
free_host_timer_slot() function called in the correct places
This fixes:
* problems on hosts where timer_t 0 is valid
* the FIXME in next_free_host_timer() about locking
* bugs in the error paths in timer_create where we forgot to release
the slot we grabbed, or forgot to free the host timer
Reported-by: Jon Alduan <jon.alduan@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220725110035.1273441-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fixes: 66fb9763af ("basic signal handling")
Fixes: cf8b8bfc50 ("linux-user: add support for rt_tgsigqueueinfo() system call")
Signed-off-by: fanwenjie <fanwj@mail.ustc.edu.cn>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We don't emulate a preemptive kernel on this level, and the hppa architecture
doesn't allow context switches on the gateway page. So we always have to return
to sc_iaoq[] and not to gr[31].
This fixes the remaining random segfaults which still occured.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20220924114501.21767-8-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The hppa platform uses an upwards-growing stack and required in Linux
kernels < 5.18 an executable stack for signal processing. For that some
executables and libraries are marked to have an executable stack, for
which glibc uses the mprotect() syscall to mark the stack like this:
mprotect(xfa000000,4096,PROT_EXEC|PROT_READ|PROT_WRITE|PROT_GROWSUP).
Currently qemu will return -TARGET_EINVAL for this syscall because of the
checks in validate_prot_to_pageflags(), which doesn't allow the
PROT_GROWSUP or PROT_GROWSDOWN flags and thus triggers this error in the
guest:
error while loading shared libraries: libc.so.6: cannot enable executable stack as shared object requires: Invalid argument
Allow mprotect() to handle both flags and thus fix the guest.
The glibc tst-execstack testcase can be used to reproduce the issue.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20220924114501.21767-7-deller@gmx.de>
[lvivier: s/elif TARGET_HPPA/elif defined(TARGET_HPPA)/]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The hppa target requires a much bigger stack than many other targets,
and the Linux kernel allocates 80 MB by default for it.
This patch increases the guest stack for hppa to 80MB, and prevents
that this default stack size gets reduced by a lower stack limit on the
host.
Since the stack grows upwards on hppa, the stack_limit value marks the
upper boundary of the stack. Fix the output of /proc/self/maps (in the
guest) to show the [stack] marker on the correct memory area.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20220924114501.21767-6-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The stack-overflow check when building the "grep" debian package fails
on the debian hppa target. Reason is, that the guard page at the top
of the stack (which is added by qemu) prevents the fault handler in the
grep program to properly detect the stack overflow.
The Linux kernel on a physical machine doesn't install a guard page
either, so drop it and as such fix the build of "grep".
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20220924114501.21767-5-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In Linux kernel v5.18 the vDSO for signal trampoline was added.
This code mimiks the bare minimum of this vDSO and thus avoids that the
parisc emulation needs executable stacks.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20220924114501.21767-4-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The xtensa platform has a value of 0x10 for PROT_SEM.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220924114501.21767-2-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is a follow-up for commit 892a4f6a75 ("linux-user: Add partial
support for MADV_DONTNEED"), which added passthrough for anonymous
mappings. File mappings can be handled in a similar manner.
In order to do that, mark pages, for which mmap() was passed through,
with PAGE_PASSTHROUGH, and then allow madvise() passthrough for these
pages. Drop the explicit PAGE_ANON check, since anonymous mappings are
expected to have PAGE_PASSTHROUGH anyway.
Add PAGE_PASSTHROUGH to PAGE_STICKY in order to keep it on mprotect().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220725125043.43048-1-iii@linux.ibm.com>
Message-Id: <20220906000839.1672934-5-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The default implementation has several problems: the first argument is
not displayed as a pointer, making it harder to grep; the third
argument is not symbolized; and there are several extra unused
arguments.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220906000839.1672934-4-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
MADV_DONTNEED has a different value on alpha, compared to all the other
architectures. Fix by using TARGET_MADV_DONTNEED instead of
MADV_DONTNEED.
Fixes: 892a4f6a75 ("linux-user: Add partial support for MADV_DONTNEED")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220906000839.1672934-3-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Provide MADV_* definitions using target_mman.h header, similar to what
kernel does. Most architectures use the same values, with the exception
of alpha and hppa.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220906000839.1672934-2-iii@linux.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
On the parisc architecture the stack grows upwards.
Move the TASK_UNMAPPED_BASE to high memory area as it's done by the
kernel on physical machines.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20220918194555.83535-9-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If the mode parameter of chmod() is zero, this value isn't shown
when stracing a program:
chmod("filename",)
This patch fixes it up to show the zero-value as well:
chmod("filename",000)
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220918194555.83535-8-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Enhance the hppa linux-user cpu_loop() to show more debugging info
on hard errors.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220918194555.83535-6-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Enhance the EXCP_DUMP() macro to print out the failing program too.
During debugging it's sometimes hard to track down the actual failing
program if you are e.g. building a whole debian package.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220918194555.83535-5-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
I noticed those were missing when running the glib2.0 testsuite.
Add the syscalls including the strace output.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220918194555.83535-4-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Allow linux-user to strace the clock_gettime64() syscall.
This syscall is used a lot on 32-bit guest architectures which use newer
glibc versions.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220918194555.83535-3-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some of the guest signal numbers are currently not converted to
their representative names in the strace output, e.g. SIGVTALRM.
This patch introduces a smart way to generate and keep in sync the
host-to-guest and guest-to-host signal conversion tables for usage in
the qemu signal and strace code. This ensures that any signals
will now show up in both tables.
There is no functional change in this patch - with the exception that yet
missing signal names now show up in the strace code too.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220918194555.83535-2-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
