Commit Graph

29705 Commits

Author SHA1 Message Date
Igor Mammedov
43dde1705c acpi: build_hpet: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

while at it convert build_hpet() to endian agnostic
build_append_FOO() API

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210924122802.1455362-15-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
5c142bc48f acpi: x86: build_dsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-14-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
b25681c358 acpi: vmgenid_build_acpi: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-13-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
de67dd1be0 acpi: nvdimm_build_ssdt: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-12-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
7d1823beef acpi: nvdimm_build_nfit: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Also since acpi_table_begin() reserves space only for standard header
while previous acpi_data_push() reserved the header + 4 bytes field,
add 4 bytes 'Reserved' field into nvdimm_build_nfit() which didn't
have it.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
689ef4721a acpi: build_hmat: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Also since acpi_table_begin() reserves space only for standard header
while previous acpi_data_push() reserved the header + 4 bytes field,
add 4 bytes 'Reserved' field into hmat_build_table_structs()
which didn have it.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
578bc7a064 acpi: build_mcfg: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
13229858cf acpi: acpi_build_hest: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Dongjiu Geng <gengdongjiu1@gmail.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
3e39c1ed7b acpi: build_tpm2: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
4b56e1e4eb acpi: build_fadt: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
7469f1991d acpi: build_slit: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
f497b7cae1 acpi: build_xsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

While at it switch to build_append_int_noprefix() to build
entries to other tables (which also removes some manual offset
calculations).

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
ea298e83a7 acpi: build_rsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offests magic from API user.

While at it switch to build_append_int_noprefix() to build
entries to other tables (which also removes some manual offset
calculations).

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Igor Mammedov
c151fd8710 acpi: add helper routines to initialize ACPI tables
Patch introduces acpi_table_begin()/ acpi_table_end() API
that hides pointer/offset arithmetic from user as opposed
to build_header(), to prevent errors caused by it [1].

 acpi_table_begin():
     initializes table header and keeps track of
     table data/offsets
 acpi_table_end():
     sets actual table length and tells bios loader
     where table is for the later initialization on
     guest side.

1) commits
   bb9feea431 x86: acpi: use offset instead of pointer when using build_header()
   4d027afeb3 Virt: ACPI: fix qemu assert due to re-assigned table data address

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
2021-10-05 17:30:57 -04:00
Stefano Garzarella
46ce017167 vhost-vsock: handle common features in vhost-vsock-common
virtio-vsock features, like VIRTIO_VSOCK_F_SEQPACKET, can be handled
by vhost-vsock-common parent class. In this way, we can reuse the
same code for all virtio-vsock backends (i.e. vhost-vsock,
vhost-user-vsock).

Let's move `seqpacket` property to vhost-vsock-common class, add
vhost_vsock_common_get_features() used by children, and disable
`seqpacket` for vhost-user-vsock device for machine types < 6.2.

The behavior of vhost-vsock device doesn't change; vhost-user-vsock
device now supports `seqpacket` property.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210921161642.206461-3-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Stefano Garzarella
d6a9378f47 vhost-vsock: fix migration issue when seqpacket is supported
Commit 1e08fd0a46 ("vhost-vsock: SOCK_SEQPACKET feature bit support")
enabled the SEQPACKET feature bit.
This commit is released with QEMU 6.1, so if we try to migrate a VM where
the host kernel supports SEQPACKET but machine type version is less than
6.1, we get the following errors:

    Features 0x130000002 unsupported. Allowed features: 0x179000000
    Failed to load virtio-vhost_vsock:virtio
    error while loading state for instance 0x0 of device '0000:00:05.0/virtio-vhost_vsock'
    load of migration failed: Operation not permitted

Let's disable the feature bit for machine types < 6.1.
We add a new OnOffAuto property for this, called `seqpacket`.
When it is `auto` (default), QEMU behaves as before, trying to enable the
feature, when it is `on` QEMU will fail if the backend (vhost-vsock
kernel module) doesn't support it.

Fixes: 1e08fd0a46 ("vhost-vsock: SOCK_SEQPACKET feature bit support")
Cc: qemu-stable@nongnu.org
Reported-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210921161642.206461-2-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-05 17:30:57 -04:00
Philippe Mathieu-Daudé
d6ed27bae7 hw/virtio: Have virtqueue_get_avail_bytes() pass caches arg to callees
Both virtqueue_packed_get_avail_bytes() and
virtqueue_split_get_avail_bytes() access the region cache, but
their caller also does. Simplify by having virtqueue_get_avail_bytes
calling both with RCU lock held, and passing the caches as argument.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210906104318.1569967-4-philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2021-10-05 11:19:40 -04:00
Philippe Mathieu-Daudé
ab4dd2746c hw/virtio: Acquire RCU read lock in virtqueue_packed_drop_all()
vring_get_region_caches() must be called with the RCU read lock
acquired. virtqueue_packed_drop_all() does not, and uses the
'caches' pointer. Fix that by using the RCU_READ_LOCK_GUARD()
macro.

Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210906104318.1569967-3-philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2021-10-05 11:19:40 -04:00
Philippe Mathieu-Daudé
daf0db0630 hw/remote/proxy: Categorize Wireless devices as 'Network' ones
QEMU doesn't distinct network devices per link layer (Ethernet,
Wi-Fi, CAN, ...). Categorize PCI Wireless cards as Network
devices.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jagannathan Raman <jag.raman@oracle.com>
Message-Id: <20210926201926.1690896-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-10-04 09:47:26 +02:00
David Hildenbrand
45e576c745 tpm: mark correct memory region range dirty when clearing RAM
We might not start at the beginning of the memory region. Let's
calculate the offset into the memory region via the difference in the
host addresses.

Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Fixes: ffab1be706 ("tpm: clear RAM when "memory overwrite" requested")
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Claudio Fontana <cfontana@suse.de>
Cc: Thomas Huth <thuth@redhat.com>
Cc: "Alex Bennée" <alex.bennee@linaro.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210727082545.17934-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-02 08:43:21 +02:00
David Hildenbrand
d89dd28f0e qapi: Include qom-path in MEMORY_DEVICE_SIZE_CHANGE qapi events
As we might not always have a device id, it is impossible to always
match MEMORY_DEVICE_SIZE_CHANGE events to an actual device. Let's
include the qom-path in the event, which allows for reliable mapping of
events to devices.

Fixes: 722a3c783e ("virtio-pci: Send qapi events when the virtio-mem size changes")
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210929162445.64060-3-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-02 08:43:21 +02:00
David Hildenbrand
75b98cb9f6 virtio-mem-pci: Fix memory leak when creating MEMORY_DEVICE_SIZE_CHANGE event
Apparently, we don't have to duplicate the string.

Fixes: 722a3c783e ("virtio-pci: Send qapi events when the virtio-mem size changes")
Cc: qemu-stable@nongnu.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210929162445.64060-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-02 08:43:21 +02:00
Vitaly Kuznetsov
f701ecec2b i386: Change the default Hyper-V version to match WS2016
KVM implements some Hyper-V 2016 functions so providing WS2008R2 version
is somewhat incorrect. While generally guests shouldn't care about it
and always check feature bits, it is known that some tools in Windows
actually check version info.

For compatibility reasons make the change for 6.2 machine types only.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210902093530.345756-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 19:04:45 +02:00
Yanan Wang
8bdfec393a machine: Put all sanity-check in the generic SMP parser
Put both sanity-check of the input SMP configuration and sanity-check
of the output SMP configuration uniformly in the generic parser. Then
machine_set_smp() will become cleaner, also all the invalid scenarios
can be tested only by calling the parser.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-16-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 19:04:31 +02:00
Paolo Bonzini
e7f944bb94 machine: Use g_autoptr in machine_set_smp
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 19:04:03 +02:00
Yanan Wang
2b52619994 machine: Move smp_prefer_sockets to struct SMPCompatProps
Now we have a common structure SMPCompatProps used to store information
about SMP compatibility stuff, so we can also move smp_prefer_sockets
there for cleaner code.

No functional change intended.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-15-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 15:29:15 +02:00
Yanan Wang
7687b2b3ed machine: Remove smp_parse callback from MachineClass
Now we have a generic smp parser for all arches, and there will
not be any other arch specific ones, so let's remove the callback
from MachineClass and call the parser directly.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-14-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 15:28:19 +02:00
Yanan Wang
e4a97a893b machine: Make smp_parse generic enough for all arches
Currently the only difference between smp_parse and pc_smp_parse
is the support of dies parameter and the related error reporting.
With some arch compat variables like "bool dies_supported", we can
make smp_parse generic enough for all arches and the PC specific
one can be removed.

Making smp_parse() generic enough can reduce code duplication and
ease the code maintenance, and also allows extending the topology
with more arch specific members (e.g., clusters) in the future.

Suggested-by: Andrew Jones <drjones@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-13-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 15:28:19 +02:00
Yanan Wang
003f230e37 machine: Tweak the order of topology members in struct CpuTopology
Now that all the possible topology parameters are integrated in struct
CpuTopology, tweak the order of topology members to be "cpus/sockets/
dies/cores/threads/maxcpus" for readability and consistency. We also
tweak the comment by adding explanation of dies parameter.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210929025816.21076-12-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 15:28:19 +02:00
Yanan Wang
69fc28a78d machine: Use ms instead of global current_machine in sanity-check
In the sanity-check of smp_cpus and max_cpus against mc in function
machine_set_smp(), we are now using ms->smp.max_cpus for the check
but using current_machine->smp.max_cpus in the error message.
Tweak this by uniformly using the local ms.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210929025816.21076-11-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 15:28:19 +02:00
Yanan Wang
4a0af2930a machine: Prefer cores over sockets in smp parsing since 6.2
In the real SMP hardware topology world, it's much more likely that
we have high cores-per-socket counts and few sockets totally. While
the current preference of sockets over cores in smp parsing results
in a virtual cpu topology with low cores-per-sockets counts and a
large number of sockets, which is just contrary to the real world.

Given that it is better to make the virtual cpu topology be more
reflective of the real world and also for the sake of compatibility,
we start to prefer cores over sockets over threads in smp parsing
since machine type 6.2 for different arches.

In this patch, a boolean "smp_prefer_sockets" is added, and we only
enable the old preference on older machines and enable the new one
since type 6.2 for all arches by using the machine compat mechanism.

Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-10-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 15:28:16 +02:00
Yanan Wang
52082d3ba4 machine: Improve the error reporting of smp parsing
We have two requirements for a valid SMP configuration:
the product of "sockets * cores * threads" must represent all the
possible cpus, i.e., max_cpus, and then must include the initially
present cpus, i.e., smp_cpus.

So we only need to ensure 1) "sockets * cores * threads == maxcpus"
at first and then ensure 2) "maxcpus >= cpus". With a reasonable
order of the sanity check, we can simplify the error reporting code.
When reporting an error message we also report the exact value of
each topology member to make users easily see what's going on.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210929025816.21076-7-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 15:27:56 +02:00
Yanan Wang
7d8c5a3962 machine: Set the value of cpus to match maxcpus if it's omitted
Currently we directly calculate the omitted cpus based on the given
incomplete collection of parameters. This makes some cmdlines like:
  -smp maxcpus=16
  -smp sockets=2,maxcpus=16
  -smp sockets=2,dies=2,maxcpus=16
  -smp sockets=2,cores=4,maxcpus=16
not work. We should probably set the value of cpus to match maxcpus
if it's omitted, which will make above configs start to work.

So the calculation logic of cpus/maxcpus after this patch will be:
When both maxcpus and cpus are omitted, maxcpus will be calculated
from the given parameters and cpus will be set equal to maxcpus.
When only one of maxcpus and cpus is given then the omitted one
will be set to its counterpart's value. Both maxcpus and cpus may
be specified, but maxcpus must be equal to or greater than cpus.

Note: change in this patch won't affect any existing working cmdlines
but allows more incomplete configs to be valid.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-6-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 15:27:56 +02:00
Yanan Wang
9a52b50806 machine: Uniformly use maxcpus to calculate the omitted parameters
We are currently using maxcpus to calculate the omitted sockets
but using cpus to calculate the omitted cores/threads. This makes
cmdlines like:
  -smp cpus=8,maxcpus=16
  -smp cpus=8,cores=4,maxcpus=16
  -smp cpus=8,threads=2,maxcpus=16
work fine but the ones like:
  -smp cpus=8,sockets=2,maxcpus=16
  -smp cpus=8,sockets=2,cores=4,maxcpus=16
  -smp cpus=8,sockets=2,threads=2,maxcpus=16
break the sanity check.

Since we require for a valid config that the product of "sockets * cores
* threads" should equal to the maxcpus, we should uniformly use maxcpus
to calculate their omitted values.

Also the if-branch of "cpus == 0 || sockets == 0" was split into two
branches of "cpus == 0" and "sockets == 0" so that we can clearly read
that we are parsing the configuration with a preference on cpus over
sockets over cores over threads.

Note: change in this patch won't affect any existing working cmdlines
but improves consistency and allows more incomplete configs to be valid.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-5-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 15:27:56 +02:00
Yanan Wang
5d8b5a5055 machine: Minor refactor/fix for the smp parsers
To pave the way for the functional improvement in later patches,
make some refactor/cleanup for the smp parsers, including using
local maxcpus instead of ms->smp.max_cpus in the calculation,
defaulting dies to 0 initially like other members, cleanup the
sanity check for dies.

We actually also fix a hidden defect by avoiding directly using
the provided *zero value* in the calculation, which could cause
a segment fault (e.g. using dies=0 in the calculation).

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-4-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 15:27:56 +02:00
Yanan Wang
c2511b1632 machine: Deprecate "parameter=0" SMP configurations
In the SMP configuration, we should either provide a topology
parameter with a reasonable value (greater than zero) or just
omit it and QEMU will compute the missing value.

The users shouldn't provide a configuration with any parameter
of it specified as zero (e.g. -smp 8,sockets=0) which could
possibly cause unexpected results in the -smp parsing. So we
deprecate this kind of configurations since 6.2 by adding the
explicit sanity check.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-3-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 15:27:56 +02:00
Peter Maydell
bb4aa8f59e target-arm queue:
* allwinner-h3: Switch to SMC as PSCI conduit
  * arm: tcg: Adhere to SMCCC 1.3 section 5.2
  * xlnx-zcu102, xlnx-versal-virt: Support BBRAM and eFUSE devices
  * gdbstub related code cleanups
  * Don't put FPEXC and FPSID in org.gnu.gdb.arm.vfp XML
  * Use _init vs _new convention in bus creation function names
  * sabrelite: Connect SPI flash CS line to GPIO3_19
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmFV05gZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3kVoD/9rlpi81v6U2zPmW5s/lFB8
 m7eqtVpP2T1UwwGPw5jXZ4qAyDyCDXJxtW8B2ePxjXfrFT5f59hy9myBFqDebjNC
 Xwdwafc17lkUm0CrIEwhMhGYiXs6yak1YcGqEPZ3ceWt67kVByXGj89mLepogCHn
 LvcjQGC3PuDvDHWnOKdOBhxTu+rvQSDRXpVCuBAd3eJBn9jxG10cdaCr3/Z7VFA/
 bnc9bSU8qJ0hYCswHHld9R2Rk9zYDQmrtMpygN6pviCd5qWGEOh8b5vszmrSHYo9
 tn0bSp9d9k2wBXrPR5Ux3L0IMRBp7N88tSDw2QyatDltltjsCKw+ZMxjKHh0mxnr
 N1QF1FteIFliu5GQeMiEWPP87rVZ31quWZUIln6XYo9+aXus8jd88vxdpND1v767
 np/q6BW0g+Tuu2T+QRe5V8VBQJzgEAKT7AwCVHC+5Flyq8fWFcFdPp1dygWXdzW3
 Yhmq2JwwMq/3MjZY10aymohrvFPAQSx2bGGDS9yi8m5seaJvHjJW5fZQUVapy0vw
 andiIFNC9KxeQ23AZM0oKkW/d5EckKIkagfiq5+71QhvtbJrXbz+fs7UxHN0IVeX
 7px+ih0xJcz3uVxZtZ/kvpBMMe3WEMd9r2tZOhbJ9K8RlCcB11y1AnZaBs/2fess
 +DzTJOkZGu1oDP4IAAqGBg==
 =eAN3
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210930' into staging

target-arm queue:
 * allwinner-h3: Switch to SMC as PSCI conduit
 * arm: tcg: Adhere to SMCCC 1.3 section 5.2
 * xlnx-zcu102, xlnx-versal-virt: Support BBRAM and eFUSE devices
 * gdbstub related code cleanups
 * Don't put FPEXC and FPSID in org.gnu.gdb.arm.vfp XML
 * Use _init vs _new convention in bus creation function names
 * sabrelite: Connect SPI flash CS line to GPIO3_19

# gpg: Signature made Thu 30 Sep 2021 16:11:20 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210930: (22 commits)
  hw/arm: sabrelite: Connect SPI flash CS line to GPIO3_19
  ide: Rename ide_bus_new() to ide_bus_init()
  qbus: Rename qbus_create() to qbus_new()
  qbus: Rename qbus_create_inplace() to qbus_init()
  pci: Rename pci_root_bus_new_inplace() to pci_root_bus_init()
  ipack: Rename ipack_bus_new_inplace() to ipack_bus_init()
  scsi: Replace scsi_bus_new() with scsi_bus_init(), scsi_bus_init_named()
  target/arm: Don't put FPEXC and FPSID in org.gnu.gdb.arm.vfp XML
  target/arm: Move gdbstub related code out of helper.c
  target/arm: Fix coding style issues in gdbstub code in helper.c
  configs: Don't include 32-bit-only GDB XML in aarch64 linux configs
  docs/system/arm: xlnx-versal-virt: BBRAM and eFUSE Usage
  hw/arm: xlnx-zcu102: Add Xilinx eFUSE device
  hw/arm: xlnx-zcu102: Add Xilinx BBRAM device
  hw/arm: xlnx-versal-virt: Add Xilinx eFUSE device
  hw/arm: xlnx-versal-virt: Add Xilinx BBRAM device
  hw/nvram: Introduce Xilinx battery-backed ram
  hw/nvram: Introduce Xilinx ZynqMP eFuse device
  hw/nvram: Introduce Xilinx Versal eFuse device
  hw/nvram: Introduce Xilinx eFuse QOM
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-30 21:16:54 +01:00
Peter Maydell
0021c4765a * SGX implementation for x86
* Miscellaneous bugfixes
 * Fix dependencies from ROMs to qtests
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmFVu/sUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNFUgf+OexjKqJw4qzbDdQrxWqw3upoFblk
 y4OrmrhCyCKDwPghnjHUEVGHnNKqKpCLoIvtvFZ7xX/qezpMtZxVUliOVNQGmioR
 MZU/DbdlvVL/t8yKjfz1ljshk55hnSJ7rAv8LBA+B3uNzyJ+LZU9+Kbvmei5oyex
 nenCtXnoVNBJMvTBE/KfJbp0UasEb1OTvPBa0Y7mHyDub28FDPKr9WZbloCLUtE+
 uXwbZ34VRDsxbLnXh+BJ+ljOQLdsJErAkiPKTnW1/3W8Ti7PzOzvLpbSIVdBv/9A
 U1qOEm48BjCrG/tFJvTUm0ZM7AHmqYfvmwpenDpL0FhReohMdUa3pycQ9g==
 =Hicy
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* SGX implementation for x86
* Miscellaneous bugfixes
* Fix dependencies from ROMs to qtests

# gpg: Signature made Thu 30 Sep 2021 14:30:35 BST
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (33 commits)
  meson_options.txt: Switch the default value for the vnc option to 'auto'
  build-sys: add HAVE_IPPROTO_MPTCP
  memory: Add tracepoint for dirty sync
  memory: Name all the memory listeners
  target/i386: Fix memory leak in sev_read_file_base64()
  tests: qtest: bios-tables-test depends on the unpacked edk2 ROMs
  meson: unpack edk2 firmware even if --disable-blobs
  target/i386: Add the query-sgx-capabilities QMP command
  target/i386: Add HMP and QMP interfaces for SGX
  docs/system: Add SGX documentation to the system manual
  sgx-epc: Add the fill_device_info() callback support
  i440fx: Add support for SGX EPC
  q35: Add support for SGX EPC
  i386: acpi: Add SGX EPC entry to ACPI tables
  i386/pc: Add e820 entry for SGX EPC section(s)
  hw/i386/pc: Account for SGX EPC sections when calculating device memory
  hw/i386/fw_cfg: Set SGX bits in feature control fw_cfg accordingly
  Adjust min CPUID level to 0x12 when SGX is enabled
  i386: Propagate SGX CPUID sub-leafs to KVM
  i386: kvm: Add support for exposing PROVISIONKEY to guest
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-30 17:38:31 +01:00
Peter Maydell
fce8f7735f ppc patch queue for 2021-09-30
Here's the next batch of ppc related patches for qemu-6.2.  Highlights
 are:
  * Fixes for several TCG math instructions from the El Dorado Institute
  * A number of improvements to the powernv machine type
  * Support for a new DEVICE_UNPLUG_GUEST_ERROR QAPI event from Daniel
    Barboza
  * Support for the new FORM2 PAPR NUMA representation.  This allows
    more specific NUMA distances, as well as asymmetric configurations
  * Fix for 64-bit decrementer (used on MicroWatt CPUs)
  * Assorted fixes and cleanups
  * A number of updates to MAINTAINERS
 
 Note that the DEVICE_UNPLUG_GUEST_ERROR stuff includes changes to
 files outside my normal area, but has suitable Acks.
 
 The MAINTAINERS updates are mostly about marking minor platforms
 unmaintained / orphaned, and moving some pieces away from myself and
 Greg.  As we move onto other projects, we're going to need to drop
 more of the ppc maintainership, though we're hoping we can avoid too
 abrupt a change.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAmFVTlEACgkQbDjKyiDZ
 s5IATRAAi3qB5riIXQEO41SoG5EjwJ9+2VQmagMkgwyNTQp5SyrqiWpTJ7Cq8IMF
 inEgV8vHv40GFJLdXXjTvdsRkAxh1siVZR7okmbd144ZdwL/ntJ4FFiGG5BjFgf2
 DajbDW/RgNDsWkTFbnhKVDNTzFbxHgeGf/g+KOPmQ5MtPPJk/Og2jJVOVE+CCY+Q
 FsF7xe9ehffrGP4ObkwKM8pNMWEaJ8KP+Z1ZV5WQwQSHPZD4x1qb6aaH8JQWv7Fl
 pqep5nlUv0KNsRPFj4hGhzjB9JUMMnWtSEuw5GNL0bQAj1v6tPNESRMw6fInAR/A
 JlvG6iYba2ZKZ7+SGipwYyVzBPnE7ur9i2E5MaANTSQF1zgsSwcYT6J5dYSCZmNH
 XrEZYYm1MyCTem8PNKrP44QRQAQz+vfHb8hUkwzNsZC7DLLsZ3JQ2AWcAvWFOKRe
 /s3WyODeXa3gZMCBFbvCWVAPiKNNFGQMsa2/bkF7FpvNGl99xL3o6MDskA2dSdTK
 0oreMT9OKdDS2W2LpDCasq6HHVsoJ+hc+TkWCEshEEPb7jUAIOnKqhHh/aqlXVf7
 J3r68FFbNbBoPR0SgdLc4teBmUKDJIGpZT8gaJ7Vbx6IiHXH21ZzOHKuTjbJZWWN
 u1vcjBBqvbQmrwhCyi6Fe5gGM63GcB/ulizM1rNyqIpTUuzyx9I=
 =shYQ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.2-20210930' into staging

ppc patch queue for 2021-09-30

Here's the next batch of ppc related patches for qemu-6.2.  Highlights
are:
 * Fixes for several TCG math instructions from the El Dorado Institute
 * A number of improvements to the powernv machine type
 * Support for a new DEVICE_UNPLUG_GUEST_ERROR QAPI event from Daniel
   Barboza
 * Support for the new FORM2 PAPR NUMA representation.  This allows
   more specific NUMA distances, as well as asymmetric configurations
 * Fix for 64-bit decrementer (used on MicroWatt CPUs)
 * Assorted fixes and cleanups
 * A number of updates to MAINTAINERS

Note that the DEVICE_UNPLUG_GUEST_ERROR stuff includes changes to
files outside my normal area, but has suitable Acks.

The MAINTAINERS updates are mostly about marking minor platforms
unmaintained / orphaned, and moving some pieces away from myself and
Greg.  As we move onto other projects, we're going to need to drop
more of the ppc maintainership, though we're hoping we can avoid too
abrupt a change.

# gpg: Signature made Thu 30 Sep 2021 06:42:41 BST
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.2-20210930: (44 commits)
  MAINTAINERS: Demote sPAPR from "Supported" to "Maintained"
  MAINTAINERS: Add information for OpenPIC
  MAINTAINERS: Remove David & Greg as reviewers/co-maintainers of powernv
  MAINTAINERS: Orphan obscure ppc platforms
  MAINTAINERS: Remove David & Greg as reviewers for a number of boards
  MAINTAINERS: Remove machine specific files from ppc TCG CPUs entry
  spapr/xive: Fix kvm_xive_source_reset trace event
  spapr_numa.c: fixes in spapr_numa_FORM2_write_rtas_tables()
  hw/intc: openpic: Clean up the styles
  hw/intc: openpic: Drop Raven related codes
  hw/intc: openpic: Correct the reset value of IPIDR for FSL chipset
  target/ppc: Fix 64-bit decrementer
  target/ppc: Convert debug to trace events (decrementer and IRQ)
  spapr_numa.c: handle auto NUMA node with no distance info
  spapr_numa.c: FORM2 NUMA affinity support
  spapr: move FORM1 verifications to post CAS
  spapr_numa.c: rename numa_assoc_array to FORM1_assoc_array
  spapr_numa.c: parametrize FORM1 macros
  spapr_numa.c: scrap 'legacy_numa' concept
  spapr_numa.c: split FORM1 code into helpers
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-30 16:13:04 +01:00
Peter Xu
142518bda5 memory: Name all the memory listeners
Provide a name field for all the memory listeners.  It can be used to identify
which memory listener is which.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210817013553.30584-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30 15:30:24 +02:00
Yang Zhong
0205c4fa1e target/i386: Add the query-sgx-capabilities QMP command
Libvirt can use query-sgx-capabilities to get the host
sgx capabilities to decide how to allocate SGX EPC size to VM.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210910102258.46648-3-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30 15:30:24 +02:00
Yang Zhong
57d874c4c7 target/i386: Add HMP and QMP interfaces for SGX
The QMP and HMP interfaces can be used by monitor or QMP tools to retrieve
the SGX information from VM side when SGX is enabled on Intel platform.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210910102258.46648-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30 15:30:24 +02:00
Yang Zhong
a7c565a941 sgx-epc: Add the fill_device_info() callback support
Since there is no fill_device_info() callback support, and when we
execute "info memory-devices" command in the monitor, the segfault
will be found.

This patch will add this callback support and "info memory-devices"
will show sgx epc memory exposed to guest. The result as below:

qemu) info memory-devices
Memory device [sgx-epc]: ""
  memaddr: 0x180000000
  size: 29360128
  memdev: /objects/mem1
Memory device [sgx-epc]: ""
  memaddr: 0x181c00000
  size: 10485760
  memdev: /objects/mem2

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-33-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30 15:30:24 +02:00
Sean Christopherson
fb6986a20e i440fx: Add support for SGX EPC
Enable SGX EPC virtualization, which is currently only support by KVM.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-22-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30 15:30:24 +02:00
Sean Christopherson
97488c635e q35: Add support for SGX EPC
Enable SGX EPC virtualization, which is currently only support by KVM.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-21-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30 15:30:24 +02:00
Sean Christopherson
c8a9899c1a i386: acpi: Add SGX EPC entry to ACPI tables
The ACPI Device entry for SGX EPC is essentially a hack whose primary
purpose is to provide software with a way to autoprobe SGX support,
e.g. to allow software to implement SGX support as a driver.  Details
on the individual EPC sections are not enumerated through ACPI tables,
i.e. software must enumerate the EPC sections via CPUID.  Furthermore,
software expects to see only a single EPC Device in the ACPI tables
regardless of the number of EPC sections in the system.

However, several versions of Windows do rely on the ACPI tables to
enumerate the address and size of the EPC.  So, regardless of the number
of EPC sections exposed to the guest, create exactly *one* EPC device
with a _CRS entry that spans the entirety of all EPC sections (which are
guaranteed to be contiguous in Qemu).

Note, NUMA support for EPC memory is intentionally not considered as
enumerating EPC NUMA information is not yet defined for bare metal.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-20-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30 15:30:24 +02:00
Sean Christopherson
1ed1ccc5a4 i386/pc: Add e820 entry for SGX EPC section(s)
Note that SGX EPC is currently guaranteed to reside in a single
contiguous chunk of memory regardless of the number of EPC sections.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-19-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30 15:30:24 +02:00
Sean Christopherson
0cf4ce00d2 hw/i386/pc: Account for SGX EPC sections when calculating device memory
Add helpers to detect if SGX EPC exists above 4g, and if so, where SGX
EPC above 4g ends.  Use the helpers to adjust the device memory range
if SGX EPC exists above 4g.

For multiple virtual EPC sections, we just put them together physically
contiguous for the simplicity because we don't support EPC NUMA affinity
now. Once the SGX EPC NUMA support in the kernel SGX driver, we will
support this in the future.

Note that SGX EPC is currently hardcoded to reside above 4g.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-18-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30 15:30:24 +02:00
Sean Christopherson
e2560114cd hw/i386/fw_cfg: Set SGX bits in feature control fw_cfg accordingly
Request SGX an SGX Launch Control to be enabled in FEATURE_CONTROL
when the features are exposed to the guest. Our design is the SGX
Launch Control bit will be unconditionally set in FEATURE_CONTROL,
which is unlike host bios.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-17-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30 15:30:24 +02:00
Sean Christopherson
1dec2e1f19 i386: Update SGX CPUID info according to hardware/KVM/user input
Expose SGX to the guest if and only if KVM is enabled and supports
virtualization of SGX.  While the majority of ENCLS can be emulated to
some degree, because SGX uses a hardware-based root of trust, the
attestation aspects of SGX cannot be emulated in software, i.e.
ultimately emulation will fail as software cannot generate a valid
quote/report.  The complexity of partially emulating SGX in Qemu far
outweighs the value added, e.g. an SGX specific simulator for userspace
applications can emulate SGX for development and testing purposes.

Note, access to the PROVISIONKEY is not yet advertised to the guest as
KVM blocks access to the PROVISIONKEY by default and requires userspace
to provide additional credentials (via ioctl()) to expose PROVISIONKEY.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-13-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30 14:50:20 +02:00