Commit Graph

3879 Commits

Author SHA1 Message Date
Michal Privoznik
9f5c6d06ad spice/gl: Enable dmabuf only for spice >= 0.13.1
After 474114b7 the dmabuf feature is enabled whenever spice
greater than or equal to spice 0.13.0 is found. This is because
two new functions are required: spice_qxl_gl_scanout and
spice_qxl_gl_draw_async. These were, however, introduce in 0.13.1
release. Well, technically they haven't been released yet, but
for sure they are not going to be part of 0.13.0 release (for the
ABI stability sake).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-id: 1a724e97cb587624d6f6009c15395496bccfa32b.1456317738.git.mprivozn@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-02-29 10:54:32 +01:00
Peter Maydell
6e378dd214 target-arm queue:
* Clean up handling of bad mode switches writing to CPSR, and implement
    the ARMv8 requirement that they set PSTATE.IL
  * Implement MDCR_EL3.TPM and MDCR_EL2.TPM traps on perf monitor
    register accesses
  * Don't implement stellaris-pl061-only registers on generic-pl061
  * Fix SD card handling for raspi
  * Add missing include files to MAINTAINERS
  * Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW
  * Make reserved ranges in ID_AA64* spaces RAZ, not UNDEF
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJW0GzrAAoJEDwlJe0UNgzebMsP/RWlWngvO4lXax+EvXZkIqkL
 Q+V74VaiVNrlWGjbN6PSl13PoihdN4dn3SxFD/1OKEmko4Yr4iQ7i4eVpMq5J2dG
 DSEeSUXcnxyr2Ypz46RbEYiTs2yCNS+KlxgVvTeHlN/KQx2zFQ9kBgXMWm6AdTpw
 kdJqFGxNt9suKsMEJ1jk/FO3myaYqzRLlfhFFSAcuNYZN0aidnoRBzNUWQzWei8c
 GT7sB1VYHNZEty0m1taaB4OjIjVF9RMg5ee6r7QpDYvycMCTrXY6beyEmFPD5XUL
 lLjeyBYmM1EBqGxt+7DMZe5EBTDJ2CICCMy72CspbYxr6kqjLpfNvnRbbrBJ+U7A
 aWoKaEfUhkD7dlYaW1y/hTsRbeswbMChNiwbqYulfivCACWS0XHa35OLbMzxuqOD
 QhGDIpx2Hzwj+5t52MM9kz76oFy6BLKtAs9wdVcjsNNwuxIYCiLaBP+XoUQSJVjZ
 5Cb5YMaxqV9vEiFbbSpRHuEN/IzU27W/HylosXmNOl2N8U/hN0LOgF5smYdoRQZP
 zRYCPGCjsoeOE12mn6610EQ3JykWMr5rDW4KVG+5chsYDojy8DXuQL9N6j+RTcM5
 yIIEkny0/QVyFA4EnMg9g1m7boXOPP0BLO1n0dImk23T85G9zzloLaUPW1Z9DBpM
 n+/kNrH1x9+xOdvcvJe3
 =QMDl
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20160226' into staging

target-arm queue:
 * Clean up handling of bad mode switches writing to CPSR, and implement
   the ARMv8 requirement that they set PSTATE.IL
 * Implement MDCR_EL3.TPM and MDCR_EL2.TPM traps on perf monitor
   register accesses
 * Don't implement stellaris-pl061-only registers on generic-pl061
 * Fix SD card handling for raspi
 * Add missing include files to MAINTAINERS
 * Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW
 * Make reserved ranges in ID_AA64* spaces RAZ, not UNDEF

# gpg: Signature made Fri 26 Feb 2016 15:19:07 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20160226:
  target-arm: Make reserved ranges in ID_AA64* spaces RAZ, not UNDEF
  target-arm: Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW
  sdhci: add quirk property for card insert interrupt status on Raspberry Pi
  sdhci: Revert "add optional quirk property to disable card insertion/removal interrupts"
  MAINTAINERS: Add some missing ARM related header files
  raspi: fix SD card with recent sdhci changes
  ARM: PL061: Checking register r/w accesses to reserved area
  target-arm: Implement MDCR_EL3.TPM and MDCR_EL2.TPM traps
  target-arm: Fix handling of SDCR for 32-bit code
  target-arm: Make Monitor->NS PL1 mode changes illegal if HCR.TGE is 1
  target-arm: Make mode switches from Hyp via CPS and MRS illegal
  target-arm: In v8, make illegal AArch32 mode changes set PSTATE.IL
  target-arm: Forbid mode switch to Mon from Secure EL1
  target-arm: Add Hyp mode checks to bad_mode_switch()
  target-arm: Add comment about not implementing NSACR.RFR
  target-arm: In cpsr_write() ignore mode switches from User mode
  linux-user: Use restrictive mask when calling cpsr_write()
  target-arm: Raw CPSR writes should skip checks and bank switching
  target-arm: Add write_type argument to cpsr_write()
  target-arm: Give CPSR setting on 32-bit exception return its own helper

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26 16:02:00 +00:00
Denis V. Lunev
0aa6aefc9c migration (ordinary): move bdrv_invalidate_cache_all of of coroutine context
There is a possibility to hit an assert in qcow2_get_specific_info that
s->qcow_version is undefined. This happens when VM in starting from
suspended state, i.e. it processes incoming migration, and in the same
time 'info block' is called.

The problem is that qcow2_invalidate_cache() closes the image and
memset()s BDRVQcowState in the middle.

The patch moves processing of bdrv_invalidate_cache_all out of
coroutine context for standard migration to avoid that.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
Message-Id: <1456304019-10507-2-git-send-email-den@openvz.org>

[Amit: Fix a use-after-free bug]

Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-02-26 20:39:50 +05:30
Andrew Baumann
0a7ac9f9e7 sdhci: add quirk property for card insert interrupt status on Raspberry Pi
This quirk is a workaround for the following hardware behaviour, on
which UEFI (specifically, the bootloader for Windows on Pi2) depends:

1. at boot with an SD card present, the interrupt status/enable
   registers are initially zero
2. upon enabling it in the interrupt enable register, the card insert
   bit in the interrupt status register is immediately set
3. after a subsequent controller reset, the card insert interrupt does
   not fire, even if enabled in the interrupt enable register

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1456436130-7048-3-git-send-email-Andrew.Baumann@microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26 15:09:42 +00:00
Andrew Baumann
5c1bc9a234 sdhci: Revert "add optional quirk property to disable card insertion/removal interrupts"
This reverts commit 723697551a.

This change was poorly tested on my part. It squelched card insertion
interrupts on reset, but that was not necessary because sdhci_reset()
clears all the registers (via the call to memset), so the subsequent
sdhci_insert_eject_cb() call never sees the card insert interrupt
enabled. However, not calling the insert_eject_cb results in prnsts
remaining 0, when it actually needs to be updated to indicate card
presence and R/O status.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1456436130-7048-2-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26 15:09:42 +00:00
Sascha Silbe
8da5ef579f migration/vmstate: document VMStateFlags
The VMState API is rather sparsely documented. Start by describing the
meaning of all VMStateFlags.

Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-Id: <1456474693-11662-1-git-send-email-silbe@linux.vnet.ibm.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-02-26 18:40:30 +05:30
Peter Maydell
586fc27e6a * Asynchronous dump-guest-memory from Peter
* improved logging with -D -daemonize from Dimitris
 * more address_space_* optimization from Gonglei
 * TCG xsave/xrstor thinko fix
 * chardev bugfix and documentation patch
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJWzxnbAAoJEL/70l94x66DlfkIAJyo9kOareVLOnAE8ccayghk
 0SbU1ZR9etgdeH4vZIUKzFzSg86pnqqub/w9yxgNG35PsiXVOnzgYSv6W1qsXdVE
 v32u6c+vWHvHc3cCOFI5+6nURftf2+p/vB2VFXiI23VUbhs22UAjXsUdfbp321X5
 Krme2fxk0kmwPHoKiyek0qiXa8nt0fiuFzU7DN7gTQMoDFaDEqvcULlNJHUFnep+
 M1yQfhSzrD97bafPwmIDU0LejJxrzR6phuzWedugU1tay6y3pD85wQqHdFI7fn/o
 dC4F+vg41Lc/5jKUgRMpe5FmX4VM+DvRdYgZZsp9/SkBM7DuL7crhVWVwvQj82Y=
 =8BvG
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Asynchronous dump-guest-memory from Peter
* improved logging with -D -daemonize from Dimitris
* more address_space_* optimization from Gonglei
* TCG xsave/xrstor thinko fix
* chardev bugfix and documentation patch

# gpg: Signature made Thu 25 Feb 2016 15:12:27 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream:
  target-i386: fix confusion in xcr0 bit position vs. mask
  chardev: Properly initialize ChardevCommon components
  memory: Remove unreachable return statement
  memory: optimize qemu_get_ram_ptr and qemu_ram_ptr_length
  exec: store RAMBlock pointer into memory region
  log: Redirect stderr to logfile if deamonized
  dump-guest-memory: add qmp event DUMP_COMPLETED
  Dump: add hmp command "info dump"
  Dump: add qmp command "query-dump"
  DumpState: adding total_size and written_size fields
  dump-guest-memory: add "detach" support
  dump-guest-memory: disable dump when in INMIGRATE state
  dump-guest-memory: introduce dump_process() helper function.
  dump-guest-memory: add dump_in_progress() helper function
  dump-guest-memory: using static DumpState, add DumpStatus
  dump-guest-memory: add "detach" flag for QMP/HMP interfaces.
  dump-guest-memory: cleanup: removing dump_{error|cleanup}().
  scripts/kvm/kvm_stat: Fix missing right parantheses and ".format(...)"
  qemu-options.hx: Improve documentation of chardev multiplexing mode

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-25 15:30:57 +00:00
Eric Blake
21a933ea33 chardev: Properly initialize ChardevCommon components
Commit d0d7708b forgot to parse logging for spice chardevs and
virtual consoles. This requires making qemu_chr_parse_common()
non-static. While at it, use a temporary variable to make the
code shorter, as well as reduce the churn when a later patch
alters the layout of simple unions.

Signed-off-by: Eric Blake <eblake@redhat.com>
CC: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455927587-28033-2-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-25 16:11:29 +01:00
Gonglei
d61524486c memory: Remove unreachable return statement
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <1455935721-8804-4-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-25 16:11:29 +01:00
Gonglei
3655cb9c73 memory: optimize qemu_get_ram_ptr and qemu_ram_ptr_length
these two functions consume too much cpu overhead to
find the RAMBlock by ram address.

After this patch, we can pass the RAMBlock pointer
to them so that they don't need to find the RAMBlock
anymore most of the time. We can get better performance
in address translation processing.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <1455935721-8804-3-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-25 16:11:29 +01:00
Gonglei
58eaa2174e exec: store RAMBlock pointer into memory region
Each RAM memory region has a unique corresponding RAMBlock.
In the current realization, the memory region only stored
the ram_addr which means the offset of RAM address space,
We need to qurey the global ram.list to find the ram block
by ram_addr if we want to get the ram block, which is very
expensive.

Now, we store the RAMBlock pointer into memory region
structure. So, if we know the mr, we can easily get the
RAMBlock.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <1456130097-4208-2-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-25 16:11:26 +01:00
Peter Maydell
df215b59d9 vhost, virtio, pci, pc
Fixes all over the place.
 virtio dataplane migration support.
 Old q35 machine types removed.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWzuKeAAoJECgfDbjSjVRpGzIH/1Tz6CoEq1rowiyVJ9B80oQU
 gDI2YWnJDSwJllmAF0rmoPRBQR8op3ZETZiCAcADHoZ7kdBNWGbyQeaDrrEPH7Q/
 rCDVt8Q3g80vs89aWKG0nQ16J2MW5TbkuiQw7pjQSdc9AbUdWpUqSiWnpZ+sPAql
 6DuVpjQ4/rN2alucXoa1Sir8KDDV7kBuY8U6/KoY890qzh842dv2523qvuCza9yR
 KX8Imj3oQAFjFSv5t1aOD3yYvWFd73EsReHPLGb1JtsVr/6wjs0sFUyA3JicBgnT
 +kWoSObWikfDY69HnqTkJpkun6woMM3zW5h2SkUBf9QP3yqLfGIp9uSriNN84Ak=
 =KXyh
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

vhost, virtio, pci, pc

Fixes all over the place.
virtio dataplane migration support.
Old q35 machine types removed.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 25 Feb 2016 11:16:46 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (21 commits)
  q35: No need to check gigabyte_align
  q35: Remove unused q35-acpi-dsdt.aml file
  ich9: Remove enable_tco arguments from init functions
  machine: Remove no_tco field
  q35: Remove old machine versions
  tests/vhost-user-bridge: fix build on 32 bit systems
  vring: remove
  virtio-scsi: do not use vring in dataplane
  virtio-blk: do not use vring in dataplane
  virtio-blk: fix "disabled data plane" mode
  virtio: export vring_notify as virtio_should_notify
  virtio: add AioContext-specific function for host notifiers
  vring: make vring_enable_notification return void
  block-migration: acquire AioContext as necessary
  pci core: function pci_bus_init() cleanup
  pci core: function pci_host_bus_register() cleanup
  balloon: Use only 'pc-dimm' type dimm for ballooning
  virtio-balloon: rewrite get_current_ram_size()
  move get_current_ram_size to virtio-balloon.c
  vhost-user: don't merge regions with different fds
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-25 12:13:49 +00:00
Eduardo Habkost
18d6abae3e ich9: Remove enable_tco arguments from init functions
The enable_tco arguments are always true, so they are not needed
anymore.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-02-25 13:14:19 +02:00
Eduardo Habkost
d6b304ba92 machine: Remove no_tco field
The field is always set to zero, so it is not necessary anymore.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-02-25 13:14:19 +02:00
Paolo Bonzini
fee089e4e2 vring: remove
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-25 13:14:19 +02:00
Paolo Bonzini
e24a47c5b7 virtio-scsi: do not use vring in dataplane
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-25 13:14:19 +02:00
Paolo Bonzini
03de2f5274 virtio-blk: do not use vring in dataplane
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-25 13:14:18 +02:00
Paolo Bonzini
2906cddfec virtio-blk: fix "disabled data plane" mode
In disabled mode, virtio-blk dataplane seems to be enabled, but flow
actually goes through the normal virtio path.  This patch simplifies a bit
the handling of disabled mode.  In disabled mode, virtio_blk_handle_output
might be called even if s->dataplane is not NULL.

This is a bit tricky, because the current check for s->dataplane will
always trigger, causing a continuous stream of calls to
virtio_blk_data_plane_start.  Unfortunately, these calls will not
do anything.  To fix this, set the "started" flag even in disabled
mode, and skip virtio_blk_data_plane_start if the started flag is true.
The resulting changes also prepare the code for the next patch, were
virtio-blk dataplane will reuse the same virtio_blk_handle_output function
as "regular" virtio-blk.

Because struct VirtIOBlockDataPlane is opaque in virtio-blk.c, we have
to move s->dataplane->started inside struct VirtIOBlock.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-25 13:14:18 +02:00
Paolo Bonzini
adb3feda8d virtio: export vring_notify as virtio_should_notify
Virtio dataplane needs to trigger the irq manually through the
guest notifier.  Export virtio_should_notify so that it can be
used around event_notifier_set.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-25 13:14:18 +02:00
Paolo Bonzini
a1afb6062e virtio: add AioContext-specific function for host notifiers
This is used to register ioeventfd with a dataplane thread.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-25 13:14:18 +02:00
Paolo Bonzini
8b1fe1cedf vring: make vring_enable_notification return void
Make the API more similar to the regular virtqueue API.  This will
help when modifying the code to not use vring.c anymore.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-25 13:14:18 +02:00
Peter Maydell
1b1624092d spice: initial opengl/virgl support, postcopy migration fix.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJWzFDwAAoJEEy22O7T6HE4vesP/1IULiyxkiu+rnLquspRKlKr
 Z9GE3svmQmD8BdI88uJqz28+Wwz37TyQGA9ycNmOWNeWwY88SmLo95VhHcGtk2kj
 3FdrwhaPLW+4/0yVS0BerhH4W0jVq2x7V1kRTVrejwE5TL3NaJzBf45bfxoicn68
 /oibclWwNhyaiNWklTfbTgNMaKaSsXqZqJ6wv+YEtIGsH1jhbUh0KHvJRc29rTPT
 nHLGM3IcMDTKfZMTWUyJR7d8R7wdQTxnZiYole4f2e8hJ+Vx6SgbGpkLPCsLlv2U
 jWJCzgsnJEbBD76OjGem9u/NmQoBp8BQFYLmA9Kx512HYw54EKnGQt8Lnft3pjTC
 ptUxA5C9DAniWKABo28Cea/CYV6mEjLR+Yk76omh/emJQib2db0qy2ljBdkb7MJK
 Y+tDCamH6eZ/1CnbNWsY/zp3ThMbCvWy8K9w/8mmRuQ5TH5RZNHSgexAx4voVGlW
 +d9d6+fh9F3sKR9JiAiiRpPATnA7NLqHstuylLAW0t80EMSvqTcuW8PzIS1A1K+p
 JceQxjzfsVIBY77/INYK91yLJUkMDIihi9hFoNy/zN81VyAr4NlRhktKvsQ5pRWV
 rp9CwxuzcKbYVXyLRVNAOQTCFINBhGmD/2K9UYf8vkku9knFywKeCQn0j0LVW+TZ
 X2b5o573noPRDDDMv9e5
 =PeHJ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/spice/tags/pull-spice-20160223-1' into staging

spice: initial opengl/virgl support, postcopy migration fix.

# gpg: Signature made Tue 23 Feb 2016 12:30:40 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/spice/tags/pull-spice-20160223-1:
  Postcopy+spice: Pass spice migration data earlier
  spice/gl: tweak debug messages.
  spice/gl: add unblock timer
  spice: add opengl/virgl/dmabuf support
  spice: reset cursor on resize
  egl-helpers: add functions for render nodes and dma-buf passing
  configure: add dma-buf support detection.
  spice: init dcl before registering qxl interface

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-23 16:14:17 +00:00
Peter Maydell
90ce6e2644 include: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

NB: If this commit breaks compilation for your out-of-tree
patchseries or fork, then you need to make sure you add
#include "qemu/osdep.h" to any new .c files that you have.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-23 12:43:05 +00:00
Peter Maydell
b1e34d1c3a osdep.h: Include config-target.h if NEED_CPU_H is defined
NEED_CPU_H is the define we use to distinguish per-target object
compilation from common object compilation. For the former, we must
also include config-target.h so that the .c files see the necessary
CONFIG_ constants.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-23 12:43:05 +00:00
Peter Maydell
79f56d82f8 osdep.h: Define macros for the benefit of C++ before C++11
For C++ before C++11, <stdint.h> requires definition of the macros
__STDC_CONSTANT_MACROS, __STDC_LIMIT_MACROS and __STDC_FORMAT_MACROS
in order to enable definition of various macros by the header file.
Define these in osdep.h, so that we get the right header file
definitions whether osdep.h is being used by plain C, C++11 or
older C++.

In particular libvixl's header files depend on this and won't
compile if osdep.h is included before them otherwise.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-23 12:43:04 +00:00
Dr. David Alan Gilbert
b82fc321bf Postcopy+spice: Pass spice migration data earlier
Spice hooks the migration status changes to figure out when to
transmit information to the new spice server; but the migration
status in postcopy doesn't quite fit - the destination starts
running before the end of the source migration.

It's not a case of hanging off the migration status change to
postcopy-active either, since that happens before we stop the
guest CPU.

Fix it by sending a notify just after sending the device state,
and adding a flag that can be tested by the notify receiver.

Symptom:
   spice handover doesn't work with the error:
   red_worker.c:11540:display_channel_wait_for_migrate_data: timeout

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1456161452-25318-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-02-23 12:05:02 +01:00
Gerd Hoffmann
8e388e907b spice/gl: add unblock timer
Pure debug aid, print a warning in case unblocking
doesn't happen within one second.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2016-02-23 12:04:40 +01:00
Gerd Hoffmann
474114b730 spice: add opengl/virgl/dmabuf support
This adds support for dma-buf passing to spice.  This makes virtio-gpu
with 3d acceleration work with spice.

Workflow:
 * virglrenderer renders the guest command stream into a texture.
 * qemu exports the texture as dma-buf and passes on that dma-buf
   to spice-server.
 * spice-server passes the dma-buf to spice-client, using unix
   socket file descriptor passing.
 * spice-client asks the window systems composer to render the
   dma-buf to the screen.

Requires cutting edge spice (server) and spice-gtk (client) builds,
from git master branch.

Also requires libvirt managing your qemu instance, and using
"virt-viewer --attach $guest".  libvirt will connect spice-server and
spice-client using unix sockets instead of tcp sockets then, which
is required for file descriptor passing.

Works for the local case (spice server and client on the same machine)
only.  Supporting remote too is planned (by feeding the dma-bufs into
gpu-assisted video encoder), but not there yet.

gl mode is turned off by default, use "-spice gl=on,$otherargs" to
enable it.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-02-23 12:04:39 +01:00
Gerd Hoffmann
1e3165980c egl-helpers: add functions for render nodes and dma-buf passing
Adds helpers to open a drm render node and create a opengl
context for it.  Also add a helper to export a texture as
dma-buf.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2016-02-23 12:04:39 +01:00
Vladimir Sementsov-Ogievskiy
39de99843e move get_current_ram_size to virtio-balloon.c
get_current_ram_size() is used only in virtio-balloon.c
This patch moves it into virtio-balloon and make it static, to allow
some balloon-specific tuning.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-23 12:55:16 +02:00
Michael S. Tsirkin
ffe42cc14c vhost-user: don't merge regions with different fds
vhost currently merges regions with contiguious virtual and physical
addresses.  This breaks for vhost-user since that also needs fds to
match.

Add a vhost_ops entry to compare the fds for vhost-user only.

Cc: qemu-stable@nongnu.org
Cc: Victor Kaplansky <victork@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-23 12:55:16 +02:00
Michael S. Tsirkin
b54ca0c3df bios-linker-loader: document+validate input
While guest/host ABI is documented in hw/acpi/bios-linker-loader.c,
the API was left undocumented.

This adds documentation for all API functions.

Additionally, input is validated to make sure all
pointers fall within range of provided files.

To allow this validation for checksum commands,
bios_linker_loader_add_checksum is changed to accept GArray * in place
of void *.

Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-23 12:55:16 +02:00
Dimitris Aragiorgis
96c33a4523 log: Redirect stderr to logfile if deamonized
In case of daemonize, use the logfile passed with the -D option in
order to redirect stderr to it instead of /dev/null.

Also remove some unused code in log.h.

Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com>
Message-Id: <1455795518-19205-1-git-send-email-dimara@arrikto.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-22 18:40:29 +01:00
Peter Xu
2264c2c96e DumpState: adding total_size and written_size fields
Here, total_size is the size in bytes to be dumped (raw data, which
means before compression), while written_size are bytes handled (raw
size too).

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1455772616-8668-9-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-22 18:40:28 +01:00
Peter Xu
1fbeff72c2 dump-guest-memory: add "detach" support
If "detach" is provided, one thread is created to do the dump work,
while main thread will return immediately. For each GuestPhysBlock,
adding one more field "mr" to points to MemoryRegion that it
belongs, also ref the mr before use.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-8-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-22 18:40:28 +01:00
Peter Xu
ca1fc8c97e dump-guest-memory: introduce dump_process() helper function.
No functional change. Cleanup only.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-6-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-22 18:40:28 +01:00
Peter Xu
65d64f3623 dump-guest-memory: add dump_in_progress() helper function
For now, it has no effect. It will be used in dump detach support.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-5-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-22 18:40:28 +01:00
Peter Xu
baf28f57e2 dump-guest-memory: using static DumpState, add DumpStatus
Instead of malloc/free each time for DumpState, make it
static. Added DumpStatus to show status for dump.

This is to be used for detached dump.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-4-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-22 18:40:28 +01:00
Alberto Garcia
100f8f2608 throttle: Add support for burst periods
This patch adds support for burst periods to the throttling code.
With this feature the user can keep performing bursts as defined by
the LeakyBucket.max rate for a configurable period of time.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22 14:08:05 +01:00
Alberto Garcia
1588ab5d0b throttle: Use throttle_config_init() to initialize ThrottleConfig
We can currently initialize ThrottleConfig by zeroing all its fields,
but this will change with the new fields to define the length of the
burst periods.

This patch introduces a new throttle_config_init() function and uses it
to replace all memset() calls that initialize ThrottleConfig directly.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22 14:08:05 +01:00
Alberto Garcia
d5851089a8 throttle: Merge all functions that check the configuration into one
There's no need to keep throttle_conflicting(), throttle_is_valid()
and throttle_max_is_missing_limit() as separate functions, so this
patch merges all three into one.

As a consequence, check_throttle_config() becomes redundant and can be
replaced with throttle_is_valid().

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22 14:08:05 +01:00
Alberto Garcia
03ba36c83d throttle: Make throttle_is_valid() set errp
The caller does not need to set it, and this will allow us to refactor
this function later.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22 14:08:04 +01:00
Alberto Garcia
45b2d418e0 throttle: Make throttle_max_is_missing_limit() set errp
The caller does not need to set it, and this will allow us to refactor
this function later.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22 14:08:04 +01:00
Alberto Garcia
6921b18095 throttle: Make throttle_conflicting() set errp
The caller does not need to set it, and this will allow us to refactor
this function later.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22 14:08:04 +01:00
Alberto Garcia
3c9242f5ae throttle: Make throttle_compute_timer() static
This function is only used internally in throttle.c

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-22 14:08:04 +01:00
Peter Maydell
586d1a99ff VFIO updates 2016-02-19
- AER pre-enable and misc fixes (Cao jin and Chen Fan)
  - PCI_CAP_LIST_NEXT & PCI_MSIX_FLAGS cleanup (Wei Yang)
  - AMD XGBE KVM platform passthrough (Eric Auger)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWx1DEAAoJECObm247sIsiefwQAIxC+/YW99fvUmNShOChUiVV
 ql+PJKgyHzn5lxPxHdWF9Vnv8fi3fBUFNj4v1aaagrKqGfpfUeC5IYYtgWmOes9+
 dKZGLzoG8II7EpAZmi0uSqxaIXaJBBZWlfoD26jHMT+LcDiEPj+yRoWoftoWE/8s
 8rR5qxFKnJ5E5C7v2qe+RwtRHzK2S0B2jesRpU29nYKIWu7qafwxGbDqALk9YSyI
 rt0VwVG54bjIXZAwamFUTbaUQrb/Eg42Wx4vwNXW3WqM9GvkJOuiwQko2CKPIaEj
 RXolXW1nblOnTRsB+F/uRqGrdwbG3bi1GMfibtifC7DPpC6+XhWPSIrIC7dWQ9a3
 pu88+7T3VT9vgEvq8ABeiE41wZKKftcxyd67rlVGhOsyK3mMSfn+PRIZ7PdnO7ih
 e5ISLRO7KMAaIp7/RbcgDbEM5EyVvVt0tJqs/4tS3TdvDLPyOkUFw0d6Tb5kpJTG
 NfOJk3e8Qv3iXHeBg0O3GHocO4KO8fieloKR2rMVKq13GDkbiwHun5H6hKGRkWS0
 ZleweLgKbVWmROJdEqcKp97eBhjoEUlJLRvAlcKJCtIIctMm2Bf2MeasqoFbRlEU
 Nt1rPz/Q0E7YLihQLn6a9F3yZVS0CWqimk6X7B3/PG4bzCq2MUeiL+WIla4gboQG
 6pGu+GzU0g4IXiIgJeOU
 =HiHL
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20160219.1' into staging

VFIO updates 2016-02-19

 - AER pre-enable and misc fixes (Cao jin and Chen Fan)
 - PCI_CAP_LIST_NEXT & PCI_MSIX_FLAGS cleanup (Wei Yang)
 - AMD XGBE KVM platform passthrough (Eric Auger)

# gpg: Signature made Fri 19 Feb 2016 17:28:36 GMT using RSA key ID 3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg:                 aka "Alex Williamson <alex@shazbot.org>"
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>"
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>"

* remotes/awilliam/tags/vfio-update-20160219.1:
  vfio/pci: use PCI_MSIX_FLAGS on retrieving the MSIX entries
  hw/arm/sysbus-fdt: remove qemu_fdt_setprop returned value check
  hw/arm/sysbus-fdt: enable amd-xgbe dynamic instantiation
  hw/arm/sysbus-fdt: helpers for clock node generation
  device_tree: qemu_fdt_getprop_cell converted to use the error API
  device_tree: qemu_fdt_getprop converted to use the error API
  device_tree: introduce qemu_fdt_node_path
  device_tree: introduce load_device_tree_from_sysfs
  hw/vfio/platform: amd-xgbe device
  vfio/pci: replace 1 with PCI_CAP_LIST_NEXT to make code self-explain
  pcie_aer: expose pcie_aer_msg() interface
  aer: impove pcie_aer_init to support vfio device
  vfio: make the 4 bytes aligned for capability size
  pcie: modify the capability size assert

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-19 17:44:24 +00:00
Eric Auger
58e71097ce device_tree: qemu_fdt_getprop_cell converted to use the error API
This patch aligns the prototype with qemu_fdt_getprop. The caller
can choose whether the function self-asserts on error (passing
&error_fatal as Error ** argument, corresponding to the legacy behavior),
or behaves differently such as simply output a message.

In this later case the caller can use the new lenp parameter to interpret
the error if any.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-02-19 09:42:30 -07:00
Eric Auger
78e24f235e device_tree: qemu_fdt_getprop converted to use the error API
Current qemu_fdt_getprop exits if the property is not found. It is
sometimes needed to read an optional property, in which case we do
not wish to exit but simply returns a null value.

This patch converts qemu_fdt_getprop to accept an Error **, and existing
users are converted to pass &error_fatal. This preserves the existing
behaviour. Then to use the API with your optional semantic a null
parameter can be conveyed.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-02-19 09:42:30 -07:00
Eric Auger
6d79566ae6 device_tree: introduce qemu_fdt_node_path
This new helper routine returns a NULL terminated array of
node paths matching a node name and a compat string.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-02-19 09:42:30 -07:00
Eric Auger
60e43e987c device_tree: introduce load_device_tree_from_sysfs
This function returns the host device tree blob from sysfs
(/proc/device-tree). It uses a recursive function inspired
from dtc read_fstree.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-02-19 09:42:29 -07:00