Using mprotect() to change PROT_* does not change the MAP_ANON
previously set with mmap(). Our linux-user version of MTE only
works with MAP_ANON pages, so losing PAGE_ANON caused MTE to
stop working.
Reported-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Depending on the version of gdb we may not execute the first line of
SHA1Init when executing the first "next" command - instead just
stepping over the preamble. As we don't actually care about the
position of the PC after the steps and want to be sure the
context->state[] has been loaded before we inspect it do a double next
at the start.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-8-alex.bennee@linaro.org>
The containerised compiler defaults to no-pie anyway but if we are
relying on the users installed cross compiler we need to check it
works for building 16 bit code first.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210401102530.12030-7-alex.bennee@linaro.org>
Newer compilers might end up putting some data in .data.rel.local
which was getting skipped resulting in hilarious confusion on some
tests. Fix that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210401102530.12030-6-alex.bennee@linaro.org>
While it's hard to find cross compilers packaged for arches other than
x86_64 the same cannot be said for the x86_64 compiler which is
available on Debians i386, arm64 and ppc64el release architectures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-5-alex.bennee@linaro.org>
While docker is nominally multiarch these days it doesn't mean our
distros actually package all cross compilers for all architectures.
The upcoming Debian bullseye release will improve things further. At
least for now we can get things like the 32 bit ARM compiler on it's
64 bit cousin.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-4-alex.bennee@linaro.org>
You don't usually notice this is broken on developer system on x86 as
we use the normal host compiler. However on other systems the -pc was
extraneous. Also for 32 bit only i686 packages exist now so we should
use those when available.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210401102530.12030-2-alex.bennee@linaro.org>
Query the SYS_HEAPINFO semicall and do some basic verification of the
information via libc calls.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210323165308.15244-10-alex.bennee@linaro.org>
It may be arm-compat-semihosting but more than one architecture uses
it so lets move the tests into the multiarch area. We gate it on the
feature and split the semicall.h header between the arches.
Also clean-up a bit of the Makefile messing about to one common set of
runners.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323165308.15244-6-alex.bennee@linaro.org>
The commit d03b174a83 (target/ppc: simplify bcdadd/sub functions)
meant to simplify some of the code but it inadvertently altered the
way the CR6 field is set after the operation has overflowed.
The CR6 bits are set based on the *unbounded* result of the operation,
so we need to look at the result before returning from bcd_add_mag,
otherwise we will look at 0 when it overflows.
Consider the following subtraction:
v0 = 0x9999999999999999999999999999999c (maximum positive BCD value)
v1 = 0x0000000000000000000000000000001d (negative one BCD value)
bcdsub. v0,v0,v1,0
The Power ISA 2.07B says:
If the unbounded result is greater than zero, do the following.
If PS=0, the sign code of the result is set to 0b1100.
If PS=1, the sign code of the result is set to 0b1111.
If the operation overflows, CR field 6 is set to 0b0101. Otherwise,
CR field 6 is set to 0b0100.
POWER9 hardware:
vr0 = 0x0000000000000000000000000000000c (positive zero BCD value)
cr6 = 0b0101 (0x5) (positive, overflow)
QEMU:
vr0 = 0x0000000000000000000000000000000c (positive zero BCD value)
cr6 = 0b0011 (0x3) (zero, overflow) <--- wrong
This patch reverts the part of d03b174a83 that introduced the
problem and adds a test-case to avoid further regressions:
before:
$ make run-tcg-tests-ppc64le-linux-user
(...)
TEST bcdsub on ppc64le
bcdsub: qemu/tests/tcg/ppc64le/bcdsub.c:58: test_bcdsub_gt:
Assertion `(cr >> 4) == ((1 << 2) | (1 << 0))' failed.
Fixes: d03b174a83 (target/ppc: simplify bcdadd/sub functions)
Reported-by: Paul Clarke <pc@us.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20210222194035.2723056-1-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Blink and you miss the cross TCG compiler stuff so lets display it
with the rest of the compiler information.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210222101455.12640-2-alex.bennee@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-34-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1612763186-18161-33-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Enable multiarch tests for Hexagon
Modify tests/tcg/configure.sh
Add reference files to tests/tcg/hexagon
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1612763186-18161-32-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A duplicate insn is one that is appears to be executed twice in a row.
This is currently possible due to -icount and cpu_io_recompile()
causing a re-translation of a block. On it's own this won't trigger
any tests though.
The heuristics that the plugin use can't deal with the x86 rep
instruction which (validly) will look like executing the same
instruction several times. To avoid problems later we tweak the rules
for x86 to run the "inline" version of the plugin. This also has the
advantage of increasing coverage of the plugin code (see bugfix in
previous commit).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210213130325.14781-15-alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were fudging TBI1 enabled to speed up the generated code.
Now that we've improved the code generation, remove this.
Also, tidy the comment to reflect the current code.
The pauth test was testing a kernel address (-1) and making
incorrect assumptions about TBI1; stick to userland addresses.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
/bin/true is missing on macOS, but simply "true" is available as a shell builtin.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210128135627.2067003-1-sw@weilnetz.de>
Message-Id: <20210202134001.25738-12-alex.bennee@linaro.org>
Otherwise people won't know what they are missing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210202134001.25738-10-alex.bennee@linaro.org>
The current EXRL tests crash on real machines: we must not use r0 as a base
register for trt/trtr, otherwise the content gets ignored. Also, we must
not use r0 for exrl, otherwise it gets ignored.
Let's use the "a" constraint so we get a general purpose register != r0.
For op2, we can simply specify a memory operand directly via "Q" (Memory
reference without index register and with short displacement).
Fixes: ad8c851d2e ("target/s390x: add EX support for TRT and TRTR")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210111163845.18148-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As per POSIX specification of limits.h [1], OS libc may define
PAGE_SIZE in limits.h.
Self defined PAGE_SIZE is frequently used in tests, to prevent
collosion of definition, we give PAGE_SIZE definitons reasonable
prefixs.
[1]: https://pubs.opengroup.org/onlinepubs/7908799/xsh/limits.h.html
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210118063808.12471-7-jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While GDB can work with any XML description given to it there is
special handling for SVE registers on the GDB side which makes the
users life a little better. The changes aren't that major and all the
registers save the $vg reported the same. All that changes is:
- report org.gnu.gdb.aarch64.sve
- use gdb nomenclature for names and types
- minor re-ordering of the types to match reference
- re-enable ieee_half (as we know gdb supports it now)
- $vg is now a 64 bit int
- check $vN and $zN aliasing in test
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Machado <luis.machado@linaro.org>
Message-Id: <20210108224256.2321-11-alex.bennee@linaro.org>
This allows gdb to access the target’s auxiliary vector,
which can be helpful for telling system libraries important details
about the hardware, operating system, and process.
Signed-off-by: Lirong Yuan <yuanzi@google.com>
[AJB: minor tweaks to test case, update MAINTAINERS, restrict to Linux]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200730193932.3654677-1-yuanzi@google.com>
Message-Id: <20210108224256.2321-7-alex.bennee@linaro.org>
This adds a new tests that allows us to test softmmu only features
including watchpoints. To do achieve this we need to:
- add _exit: labels to the boot codes
- write a memory.py test case
- plumb the test case into the build system
- tweak the run_test script to:
- re-direct output when asked
- use socket based connection for all tests
- add a small pause before connection
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210108224256.2321-6-alex.bennee@linaro.org>
We won't attempt to run the test now it's gated on a newer version of
gdb.
This reverts commit a930cadd83.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210108224256.2321-5-alex.bennee@linaro.org>
Hopefully this will guard against sloppy code getting into our tests.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201210190417.31673-9-alex.bennee@linaro.org>
Since commit efc6c07 ("configure: Add a test for the minimum compiler
version"), QEMU explicitely depends on GCC >= 4.8.
(clang >= 3.4 advertizes itself as GCC >= 4.2 compatible)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201210134752.780923-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable the run-gdbstub-sha1 test: it provokes an internal error
assertion failure in Ubuntu gdb 8.1.1-0ubuntu1 (Ubuntu gdb
8.1-0ubuntu3.2 also has this assert but we were previously skipping
this test because it doesn't support connection over local domain
sockets) :
timeout 60 /home/petmay01/linaro/qemu-for-merges/tests/guest-debug/run-test.py --gdb /usr/bin/gdb-multiar
/build/gdb-veKdC1/gdb-8.1.1/gdb/regcache.c:122: internal-error: void* init_regcache_descr(gdbarch*): Asser
A problem internal to GDB has been detected,
further debugging may prove unreliable.
This is a bug, please report it. For instructions, see:
<http://www.gnu.org/software/gdb/bugs/>.
Aborted (core dumped)
/home/petmay01/linaro/qemu-for-merges/tests/tcg/multiarch/Makefile.target:51: recipe for target 'run-gdbst
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201214133702.24088-1-peter.maydell@linaro.org
For PDEP and PEXT, the mask is provided in the memory (mod+r/m)
operand, and therefore is loaded in s->T0 by gen_ldst_modrm.
The source is provided in the second source operand (VEX.vvvv)
and therefore is loaded in s->T1. Fix the order in which
they are passed to the helpers.
Reported-by: Lenard Szolnoki <blog@lenardszolnoki.com>
Analyzed-by: Lenard Szolnoki <blog@lenardszolnoki.com>
Fixes: https://bugs.launchpad.net/qemu/+bug/1605123
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The note test requires gcc 10 for -mbranch-protection=standard.
The mmap test uses PROT_BTI and does not require special compiler support.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201021173749.111103-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Unlike glibc, musl does not use transparent unions to hide
the different structures that overlap struct sockaddr.
Add an explicit cast to work around this.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we are now always doing out-of-tree builds, these gitignore
files should not be necessary anymore.
Message-Id: <20200919133637.72744-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 660f793093 was a bit overzealous
with respect to tests/tcg, which needed quiet-command and $(BUILD_DIR).
Reinstate quiet-command, and replace $(BUILD_DIR) with just the
current directory.
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have an exploding complexity problem in the testing so lets just
move the more involved plugins into contrib. tests/plugins still exist
for the basic plugins that exercise the API. We restore the old
pre-meson style Makefile for contrib as it also doubles as a guide for
out-of-tree plugin builds.
While we are at it add some examples to the documentation and a
specific plugins build target.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200909112742.25730-11-alex.bennee@linaro.org>
Define anything that is missing as 0, so that flags & FE_FOO
is false for any missing FOO.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is optional in ISO C, and not all cpus provide it.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Not attempting to use a single cross-compiler for both
big-endian and little-endian at this time.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
DFPU doesn't have pre-increment FP load/store opcodes, it has
post-increment opcodes instead. Test increment opcodes present in the
current config.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
DFPU sets Invalid flag in FSR when at least one argument of FP
comparison opcodes is NaN, SNaN for most opcodes, any NaN for olt/ole.
Add checks for FSR and expected FSR values.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Test that madd doesn't do rounding after multiplication.
Test NaN propagation rules for FPU2000 and DFPU madd opcode.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Space for test results may be allocated in IRAM which is only
word-accessible. Use full 32-bit words to access test results.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The binaries move to the root directory, e.g. qemu-system-i386 or
qemu-arm. This requires changes to qtests, CI, etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The definition of top_bit used in this function is one higher
than that used in the Arm ARM psuedo-code, which put the error
indication at top_bit - 1 at the wrong place, which meant that
it wasn't visible to Auth.
Fixing the definition of top_bit requires more changes, because
its most common use is for the count of bits in top_bit:bot_bit,
which would then need to be computed as top_bit - bot_bit + 1.
For now, prefer the minimal fix to the error indication alone.
Fixes: 63ff0ca94c
Reported-by: Derrick McKee <derrick.mckee@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200728195706.11087-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added comment about the divergence from the pseudocode]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- tests/vm support for aarch64 VMs
- tests/tcg better cross-compiler detection
- update docker tooling to support registries
- update docker support for xtensa
- gitlab build docker images and store in registry
- gitlab use docker images for builds
- a number of skipIf updates to support move
- linux-user MAP_FIXED_NOREPLACE fix
- qht-bench compiler tweaks
- configure fix for secret keyring
- tsan fiber annotation clean-up
- doc updates for mttcg/icount/gdbstub
- fix cirrus to use brew bash for iotests
- revert virtio-gpu breakage
- fix LC_ALL to avoid sorting changes in iotests
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl8J0yoACgkQ+9DbCVqe
KkSzTAf/Vn+9TU8Qt7nZvl7W4tz7Sy5K8EJGwj2RXx6CWWWLiFbsXurIM8Krw5Vc
RmvUxwa359b+J0lQpfeNDHYm1nM8RZLFlkG0a5bl0I8sW0EcPjBRtwNaGKXh2p0u
u2RS2QAi6A9AvYT4ZREYlBM+o9WzbxCEQm4s8fr6WEJCQfxBnb5/bGiEjWR64e8C
j9Kvou+zAKfVizbQMtu+mwqjsoPtcS1b3vVcO7anhNuUsuaEKkS0dFWzWvw3lwJR
STIYnb8Y/eJ1yKr0hPH2qtWv3n6yhlYvYmpUCH6AwshGMUoeFEzR2VoWS6yZPGG6
na6XA3UW5R9AxIDfkCJ5ueeo8t9xMQ==
=HRWa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-110720-2' into staging
Testing and misc build updates:
- tests/vm support for aarch64 VMs
- tests/tcg better cross-compiler detection
- update docker tooling to support registries
- update docker support for xtensa
- gitlab build docker images and store in registry
- gitlab use docker images for builds
- a number of skipIf updates to support move
- linux-user MAP_FIXED_NOREPLACE fix
- qht-bench compiler tweaks
- configure fix for secret keyring
- tsan fiber annotation clean-up
- doc updates for mttcg/icount/gdbstub
- fix cirrus to use brew bash for iotests
- revert virtio-gpu breakage
- fix LC_ALL to avoid sorting changes in iotests
# gpg: Signature made Sat 11 Jul 2020 15:56:42 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-misc-110720-2: (50 commits)
iotests: Set LC_ALL=C for sort
Revert "vga: build virtio-gpu as module"
tests: fix "make check-qtest" for modular builds
.cirrus.yml: add bash to the brew packages
tests/docker: update toolchain set in debian-xtensa-cross
tests/docker: fall back more gracefully when pull fails
docs: Add to gdbstub documentation the PhyMemMode
docs/devel: add some notes on tcg-icount for developers
docs/devel: convert and update MTTCG design document
tests/qht-bench: Adjust threshold computation
tests/qht-bench: Adjust testing rate by -1
travis.yml: Test also the other targets on s390x
shippable: pull images from registry instead of building
testing: add check-build target
containers.yml: build with docker.py tooling
gitlab: limit re-builds of the containers
tests: improve performance of device-introspect-test
gitlab: add avocado asset caching
gitlab: enable check-tcg for linux-user tests
linux-user/elfload: use MAP_FIXED_NOREPLACE in pgb_reserved_va
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch to the prebuilt xtensa toolchains release 2020.07.
Drop csp toolchain as the csp core is not a part of QEMU.
Add de233_fpu and dsp3400 toolchains to enable DFPU and FPU2000 tests.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: fix path in configure.sh]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200708082347.27318-1-jcmvbkbc@gmail.com>
Message-Id: <20200709141327.14631-13-alex.bennee@linaro.org>
We were missing a bunch of compilers which we could use if they were
locally installed. The defaults are based on Debian as they seem to be
the best distro for well distributed cross-build compilers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-32-alex.bennee@linaro.org>
We've been misusing the tag naming scheme for some time by overloading
the post : section with the image type. Really it should be saved for
the revision of that particular build. Move the details to the other
side so we have:
qemu/image-name
with the implied :latest version added by the tooling.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-18-alex.bennee@linaro.org>
The SSE instruction implementations all fail to raise the expected
IEEE floating-point exceptions because they do nothing to convert the
exception state from the softfloat machinery into the exception flags
in MXCSR.
Fix this by adding such conversions. Unlike for x87, emulated SSE
floating-point operations might be optimized using hardware floating
point on the host, and so a different approach is taken that is
compatible with such optimizations. The required invariant is that
all exceptions set in env->sse_status (other than "denormal operand",
for which the SSE semantics are different from those in the softfloat
code) are ones that are set in the MXCSR; the emulated MXCSR is
updated lazily when code reads MXCSR, while when code sets MXCSR, the
exceptions in env->sse_status are set accordingly.
A few instructions do not raise all the exceptions that would be
raised by the softfloat code, and those instructions are made to save
and restore the softfloat exception state accordingly.
Nothing is done about "denormal operand"; setting that (only for the
case when input denormals are *not* flushed to zero, the opposite of
the logic in the softfloat code for such an exception) will require
custom code for relevant instructions, or else architecture-specific
conditionals in the softfloat code for when to set such an exception
together with custom code for various SSE conversion and rounding
instructions that do not set that exception.
Nothing is done about trapping exceptions (for which there is minimal
and largely broken support in QEMU's emulation in the x87 case and no
support at all in the SSE case).
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2006252358000.3832@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The x87 fpatan emulation is currently based around conversion to
double. This is inherently unsuitable for a good emulation of any
floatx80 operation. Reimplement using the soft-float operations, as
for other such instructions.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2006230000340.24721@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The x87 fyl2x emulation is currently based around conversion to
double. This is inherently unsuitable for a good emulation of any
floatx80 operation. Reimplement using the soft-float operations,
building on top of the reimplementation of fyl2xp1 and factoring out
code to be shared between the two instructions.
The included test assumes that the result in round-to-nearest mode
should always be one of the two closest floating-point numbers to the
mathematically exact result (including that it should be exact, in the
exact cases which cover more cases than for fyl2xp1).
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2006172321530.20587@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The x87 fyl2xp1 emulation is currently based around conversion to
double. This is inherently unsuitable for a good emulation of any
floatx80 operation, even before considering that it is a particularly
naive implementation using double (adding 1 then using log rather than
attempting a better emulation using log1p).
Reimplement using the soft-float operations, as was done for f2xm1; as
in that case, m68k has related operations but not exactly this one and
it seemed safest to implement directly rather than reusing the m68k
code to avoid accumulation of errors.
A test is included with many randomly generated inputs. The
assumption of the test is that the result in round-to-nearest mode
should always be one of the two closest floating-point numbers to the
mathematical value of y * log2(x + 1); the implementation aims to do
somewhat better than that (about 70 correct bits before rounding). I
haven't investigated how accurate hardware is.
Intel manuals describe a narrower range of valid arguments to this
instruction than AMD manuals. The implementation accepts the wider
range (it's needed anyway for the core code to be reusable in a
subsequent patch reimplementing fyl2x), but the test only has inputs
in the narrower range so that it's valid on hardware that may reject
or produce poor results for inputs outside that range.
Code in the previous implementation that sets C2 for some out-of-range
arguments is not carried forward to the new implementation; C2 is
undefined for this instruction and I suspect that code was just
cut-and-pasted from the trigonometric instructions (fcos, fptan, fsin,
fsincos) where C2 *is* defined to be set for out-of-range arguments.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2006172320190.20587@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The x87 f2xm1 emulation is currently based around conversion to
double. This is inherently unsuitable for a good emulation of any
floatx80 operation, even before considering that it is a particularly
naive implementation using double (computing with pow and then
subtracting 1 rather than attempting a better emulation using expm1).
Reimplement using the soft-float operations, including additions and
multiplications with higher precision where appropriate to limit
accumulation of errors. I considered reusing some of the m68k code
for transcendental operations, but the instructions don't generally
correspond exactly to x87 operations (for example, m68k has 2^x and
e^x - 1, but not 2^x - 1); to avoid possible accumulation of errors
from applying multiple such operations each rounding to floatx80
precision, I wrote a direct implementation of 2^x - 1 instead. It
would be possible in principle to make the implementation more
efficient by doing the intermediate operations directly with
significands, signs and exponents and not packing / unpacking floatx80
format for each operation, but that would make it significantly more
complicated and it's not clear that's worthwhile; the m68k emulation
doesn't try to do that.
A test is included with many randomly generated inputs. The
assumption of the test is that the result in round-to-nearest mode
should always be one of the two closest floating-point numbers to the
mathematical value of 2^x - 1; the implementation aims to do somewhat
better than that (about 70 correct bits before rounding). I haven't
investigated how accurate hardware is.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2006112341010.18393@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we make changes to the TCG we sometimes cause regressions that
are deep into the execution cycle of the guest. Debugging this often
requires comparing large volumes of trace information to figure out
where behaviour has diverged.
The lockstep plugin utilises a shared socket so two QEMU's running
with the plugin will write their current execution position and wait
to receive the position of their partner process. When execution
diverges the plugins output where they were and the previous few
blocks before unloading themselves and letting execution continue.
Originally I planned for this to be most useful with -icount but it
turns out you can get divergence pretty quickly due to asynchronous
qemu_cpu_kick_rr_cpus() events causing one side to eventually run into
a short block a few cycles before the other side. For this reason I've
added a bit of tracking and I think the divergence reporting could be
finessed to report only if we really start to diverge in execution.
An example run would be:
qemu-system-sparc -monitor none -parallel none -net none \
-M SS-20 -m 256 -kernel day11/zImage.elf \
-plugin ./tests/plugin/liblockstep.so,arg=lockstep-sparc.sock \
-d plugin,nochain
with an identical command in another window in the same working
directory.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Tested-by: Robert Foley <robert.foley@linaro.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20200610155509.12850-3-alex.bennee@linaro.org>
The check-tcg plugins build was failing because some special case
tests that needed -cpu max failed because the plugin variant hadn't
carried across the QEMU_OPTS tweak.
Guests which globally set QEMU_OPTS=-cpu FOO where unaffected.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200615141922.18829-3-alex.bennee@linaro.org>
If you jump back and forth between branches while developing plugins
you end up debugging failures caused by plugins left in the build
directory. Fix this by basing plugins on the source tree instead.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200615141922.18829-2-alex.bennee@linaro.org>
This corrects a bug introduced in my previous fix for SSE4.2 pcmpestri
/ pcmpestrm / pcmpistri / pcmpistrm substring search, commit
ae35eea7e4.
That commit fixed a bug that showed up in four GCC tests with one libc
implementation. The tests in question generate random inputs to the
intrinsics and compare results to a C implementation, but they only
test 1024 possible random inputs, and when the tests use the cases of
those instructions that work with word rather than byte inputs, it's
easy to have problematic cases that show up much less frequently than
that. Thus, testing with a different libc implementation, and so a
different random number generator, showed up a problem with the
previous patch.
When investigating the previous test failures, I found the description
of these instructions in the Intel manuals (starting from computing a
16x16 or 8x8 set of comparison results) confusing and hard to match up
with the more optimized implementation in QEMU, and referred to AMD
manuals which described the instructions in a different way. Those
AMD descriptions are very explicit that the whole of the string being
searched for must be found in the other operand, not running off the
end of that operand; they say "If the prototype and the SUT are equal
in length, the two strings must be identical for the comparison to be
TRUE.". However, that statement is incorrect.
In my previous commit message, I noted:
The operation in this case is a search for a string (argument d to
the helper) in another string (argument s to the helper); if a copy
of d at a particular position would run off the end of s, the
resulting output bit should be 0 whether or not the strings match in
the region where they overlap, but the QEMU implementation was
wrongly comparing only up to the point where s ends and counting it
as a match if an initial segment of d matched a terminal segment of
s. Here, "run off the end of s" means that some byte of d would
overlap some byte outside of s; thus, if d has zero length, it is
considered to match everywhere, including after the end of s.
The description "some byte of d would overlap some byte outside of s"
is accurate only when understood to refer to overlapping some byte
*within the 16-byte operand* but at or after the zero terminator; it
is valid to run over the end of s if the end of s is the end of the
16-byte operand. So the fix in the previous patch for the case of d
being empty was correct, but the other part of that patch was not
correct (as it never allowed partial matches even at the end of the
16-byte operand). Nor was the code before the previous patch correct
for the case of d nonempty, as it would always have allowed partial
matches at the end of s.
Fix with a partial revert of my previous change, combined with
inserting a check for the special case of s having maximum length to
determine where it is necessary to check for matches.
In the added test, test 1 is for the case of empty strings, which
failed before my 2017 patch, test 2 is for the bug introduced by my
2017 patch and test 3 deals with the case where a match of an initial
segment at the end of the string is not valid when the string ends
before the end of the 16-byte operand (that is, the case that would be
broken by a simple revert of the non-empty-string part of my 2017
patch).
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2006121344290.9881@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most x87 instruction implementations fail to raise the expected IEEE
floating-point exceptions because they do nothing to convert the
exception state from the softfloat machinery into the exception flags
in the x87 status word. There is special-case handling of division to
raise the divide-by-zero exception, but that handling is itself buggy:
it raises the exception in inappropriate cases (inf / 0 and nan / 0,
which should not raise any exceptions, and 0 / 0, which should raise
"invalid" instead).
Fix this by converting the floating-point exceptions raised during an
operation by the softfloat machinery into exceptions in the x87 status
word (passing through the existing fpu_set_exception function for
handling related to trapping exceptions). There are special cases
where some functions convert to integer internally but exceptions from
that conversion are not always correct exceptions for the instruction
to raise.
There might be scope for some simplification if the softfloat
exception state either could always be assumed to be in sync with the
state in the status word, or could always be ignored at the start of
each instruction and just set to 0 then; I haven't looked into that in
detail, and it might run into interactions with the various ways the
emulation does not yet handle trapping exceptions properly. I think
the approach taken here, of saving the softfloat state, setting
exceptions there to 0 and then merging the old exceptions back in
after carrying out the operation, is conservatively safe.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005152120280.3469@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fist / fistt family of instructions should all store the most
negative integer in the destination format when the rounded /
truncated integer result is out of range or the input is an invalid
encoding, infinity or NaN. The fisttpl and fisttpll implementations
(32-bit and 64-bit results, truncate towards zero) failed to do this,
producing the most positive integer in some cases instead. Fix this
by copying the code used to handle this issue for fistpl and fistpll,
adjusted to use the _round_to_zero functions for the actual
conversion (but without any other changes to that code).
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005152119160.3469@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fbstp implementation fails to check for out-of-range and invalid
values, instead just taking the result of conversion to int64_t and
storing its sign and low 18 decimal digits. Fix this by checking for
an out-of-range result (invalid conversions always result in INT64_MAX
or INT64_MIN from the softfloat code, which are large enough to be
considered as out-of-range by this code) and storing the packed BCD
indefinite encoding in that case.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132351110.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fbstp implementation stores +0 when the rounded result should be
-0 because it compares an integer value with 0 to determine the sign.
Fix this by checking the sign bit of the operand instead.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132350230.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fxam implementation does not check for invalid encodings, instead
treating them like NaN or normal numbers depending on the exponent.
Fix it to check that the high bit of the significand is set before
treating an encoding as NaN or normal, thus resulting in correct
handling (all of C0, C2 and C3 cleared) for invalid encodings.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132349311.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementations of the fldl2t, fldl2e, fldpi, fldlg2 and fldln2
instructions load fixed constants independent of the rounding mode.
Fix them to load a value correctly rounded for the current rounding
mode (but always rounded to 64-bit precision independent of the
precision control, and without setting "inexact") as specified.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2005132348310.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation uses floatx80_scalbn for the final scaling
operation. floatx80_scalbn ends up rounding the result using the
dynamic rounding precision configured for the FPU. But only a limited
set of x87 floating-point instructions are supposed to respect the
dynamic rounding precision, and fscale is not in that set. Fix the
implementation to save and restore the rounding precision around the
call to floatx80_scalbn.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070045430.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation passes infinite exponents through to generic
code that rounds the exponent to a 32-bit integer before using
floatx80_scalbn. In round-to-nearest mode, and ignoring exceptions,
this works in many cases. But it fails to handle the special cases of
scaling 0 by a +Inf exponent or an infinity by a -Inf exponent, which
should produce a NaN, and because it produces an inexact result for
finite nonzero numbers being scaled, the result is sometimes incorrect
in other rounding modes. Add appropriate handling of infinite
exponents to produce a NaN or an appropriately signed exact zero or
infinity as a result.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070045010.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation does not check for invalid encodings in the
exponent operand, thus treating them like INT_MIN (the value returned
for invalid encodings by floatx80_to_int32_round_to_zero). Fix it to
treat them similarly to signaling NaN exponents, thus generating a
quiet NaN result.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070044190.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation of the fscale instruction returns a NaN exponent
unchanged. Fix it to return a quiet NaN when the provided exponent is
a signaling NaN.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070043330.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation of the fxtract instruction treats all nonzero
operands as normal numbers, so yielding incorrect results for invalid
formats, infinities, NaNs and subnormal and pseudo-denormal operands.
Implement appropriate handling of all those cases.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <alpine.DEB.2.21.2005070042360.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The COMMPAGE are a number of kernel provided user-space routines for
32 bit ARM systems. Add a basic series of smoke tests to ensure it is
working as it should.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200605154929.26910-14-alex.bennee@linaro.org>
Based on the original testcase by Nikolay Igotti.
Message-ID: <CAEme+7GLKg_dNsHizzTKDymX9HyD+Ph2iZ=WKhOw2XG+zhViXg@mail.gmail.com>
Signed-off-by: Nikolay Igotti <igotti@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200520140541.30256-15-alex.bennee@linaro.org>
As we enable newer features that we want to test on arm64 targets we
need newer compilers. Split off a new debian-arm64-test-cross image
which we can use to build these new tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-11-alex.bennee@linaro.org>
While we may gamely give the right information it can still confuse
the wide range of GDBs out there. For example ppc64abi32-linux-user
reports:
warning: Selected architecture powerpc:common is not compatible with reported target architecture powerpc:common64
warning: Architecture rejected target-supplied description
but still connects. Add a test for a 0 pc and exit early if that is
the case. This may actually be a bug we need to fix?
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-8-alex.bennee@linaro.org>
I'm not sure when this broke but we should use EXTRA_RUNS for
"virtual" tests which are not generated from the binary names.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-5-alex.bennee@linaro.org>
The softfloat function floatx80_round_to_int incorrectly handles the
case of a pseudo-denormal where only the high bit of the significand
is set, ignoring that bit (treating the number as an exact zero)
rather than treating the number as an alternative representation of
+/- 2^-16382 (which may round to +/- 1 depending on the rounding mode)
as hardware does. Fix this check (simplifying the code in the
process).
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005042339420.22972@digraph.polyomino.org.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softfloat floatx80 comparisons fail to allow for pseudo-denormals,
which should compare equal to corresponding values with biased
exponent 1 rather than 0. Add an adjustment for that case when
comparing numbers with the same sign.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005042338470.22972@digraph.polyomino.org.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softfloat function addFloatx80Sigs, used for addition of values
with the same sign and subtraction of values with opposite sign, fails
to handle the case where the two values both have biased exponent zero
and there is a carry resulting from adding the significands, which can
occur if one or both values are pseudo-denormals (biased exponent
zero, explicit integer bit 1). Add a check for that case, so making
the results match those seen on x86 hardware for pseudo-denormals.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005042337570.22972@digraph.polyomino.org.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Conversions between IEEE floating-point formats should convert
signaling NaNs to quiet NaNs. Most of those in QEMU's softfloat code
do so, but those for floatx80 fail to. Fix those conversions to
silence signaling NaNs as well.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005042336170.22972@digraph.polyomino.org.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the gdbstub code was converted to the new API we missed a few
snafus in the various guests. Add a simple gdb test script which can
be used on all our linux-user guests to check for obvious failures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200430190122.4592-9-alex.bennee@linaro.org>
This test seems flaky and reports attachment even when we failed to
negotiate the architecture. However the fetching of the guest
architecture will fail tripping up the gdb AttributeError which will
trigger our early no error status exit from the test
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200430190122.4592-5-alex.bennee@linaro.org>
It seems older and non-multiarach aware GDBs might not fail gracefully
when faced with something they don't know. For example when faced with
a target XML for s390x the Ubuntu 18.04 gdb will generate an internal
fault and prompt for a core dump.
Work around this by invoking GDB in a more batch orientated way and
then trying to filter out between test failures and gdb failures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200430190122.4592-4-alex.bennee@linaro.org>
We are not using them and they just get in the way.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200403191150.863-4-alex.bennee@linaro.org>
This test exercises the gdbstub while runing the sve-iotcl test. I
haven't plubmed it into make system as we need a way of verifying if
gdb has the right support for SVE.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200316172155.971-26-alex.bennee@linaro.org>
This is a fairly bare-bones test of setting the various vector sizes
for SVE which will only fail if the PR_SVE_SET_VL can't reduce the
user-space vector length by powers of 2.
However we will also be able to use it in a future test which
exercises the GDB stub.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-25-alex.bennee@linaro.org>
A very simple test case which sets and reads SVE registers while
running a test case. We don't really need to compile a SVE binary for
this case but we will later so keep it simple for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-24-alex.bennee@linaro.org>
This tests a bunch of registers that the kernel allows userspace to
read including the CPUID registers. We need a SVE aware compiler as we
are testing the id_aa64zfr0_el1 register in the set.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-21-alex.bennee@linaro.org>
Make the output just a bit prettier when running by hand.
Cc: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pointer authentication isn't perfect so measure the percentage of
failed checks. As we want to vary the pointer we work through a bunch
of different addresses.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200225124710.14152-20-alex.bennee@linaro.org>
Although most people use the docker images this can trip up on
developer systems with actual valid cross-compilers!
Fixes: bb516dfc5b
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200225124710.14152-19-alex.bennee@linaro.org>
When combined with heavy plugins we occasionally hit the timeouts.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200225124710.14152-17-alex.bennee@linaro.org>
If we have plugins enabled we still need to have built the test to be
able to run it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200225124710.14152-2-alex.bennee@linaro.org>
Otherwise we end up failing to build our tests on CI which may have
older compilers that the user expects. We can get rid of this once we
can fallback to multiarch containers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200203090932.19147-14-alex.bennee@linaro.org>
We will need this for some tests later. The docker images already
support it by default.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200203090932.19147-13-alex.bennee@linaro.org>
