After this patch contrib/elf2dmp can be built for Windows x86 and x86_64
hosts by mingw.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Message-Id: <20181220012441.13694-7-viktor.prutyanov@phystech.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new pvh.bin option rom can be used with SeaBIOS to boot
uncompressed kernel using the x86/HVM direct boot ABI.
pvh.S contains the entry point of the option rom. It runs
in real mode, loads the e820 table querying the BIOS, and
then it switches to 32bit protected mode and jumps to the
pvh_load_kernel() written in pvh_main.c.
pvh_load_kernel() loads the cmdline and kernel entry_point
using fw_cfg, then it looks for RSDP, fills the
hvm_start_info required by x86/HVM ABI, and finally jumps
to the kernel entry_point.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Autogenerated code in trace.h/trace.c and friends is specific to the
config-host.mak TRACE_BACKENDS setting and must be regenerated when
./configure --enable-trace-backend= changes settings.
This patch ensures that changes to TRACE_BACKENDS are detected. For
example, the trace-root.h file is now updated after switching trace
backends:
$ ./configure && make
$ cp trace-root.h /tmp/old-trace-root.h
$ ./configure --enable-trace-backend=simple && make
$ diff -u /tmp/old-trace-root.h trace-root.h
Reported-by: Christophe Lyon <christophe.lyon@st.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190129025343.4788-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The dtrace systemtap trace backend for QEMU is very powerful but it is
also somewhat unfriendly to users who aren't familiar with systemtap,
or who don't need its power right now.
stap -e "....some strange script...."
The 'log' backend for QEMU by comparison is very crude but incredibly
easy to use:
$ qemu -d trace:qio* ...some args...
23266@1547735759.137292:qio_channel_socket_new Socket new ioc=0x563a8a39d400
23266@1547735759.137305:qio_task_new Task new task=0x563a891d0570 source=0x563a8a39d400 func=0x563a86f1e6c0 opaque=0x563a89078000
23266@1547735759.137326:qio_task_thread_start Task thread start task=0x563a891d0570 worker=0x563a86f1ce50 opaque=0x563a891d9d90
23273@1547735759.137491:qio_task_thread_run Task thread run task=0x563a891d0570
23273@1547735759.137503:qio_channel_socket_connect_sync Socket connect sync ioc=0x563a8a39d400 addr=0x563a891d9d90
23273@1547735759.138108:qio_channel_socket_connect_fail Socket connect fail ioc=0x563a8a39d400
This commit introduces a way to do simple printf style logging of probe
points using systemtap. In particular it creates another set of tapsets,
one per emulator:
/usr/share/systemtap/tapset/qemu-*-log.stp
These pre-define probe functions which simply call printf() on their
arguments. The printf() format string is taken from the normal
trace-events files, with a little munging to the format specifiers
to cope with systemtap's more restrictive syntax.
With this you can now do
$ stap -e 'probe qemu.system.x86_64.log.qio*{}'
22806@1547735341399856820 qio_channel_socket_new Socket new ioc=0x56135d1d7c00
22806@1547735341399862570 qio_task_new Task new task=0x56135cd66eb0 source=0x56135d1d7c00 func=0x56135af746c0 opaque=0x56135bf06400
22806@1547735341399865943 qio_task_thread_start Task thread start task=0x56135cd66eb0 worker=0x56135af72e50 opaque=0x56135c071d70
22806@1547735341399976816 qio_task_thread_run Task thread run task=0x56135cd66eb0
We go one step further though and introduce a 'qemu-trace-stap' tool to
make this even easier
$ qemu-trace-stap run qemu-system-x86_64 'qio*'
22806@1547735341399856820 qio_channel_socket_new Socket new ioc=0x56135d1d7c00
22806@1547735341399862570 qio_task_new Task new task=0x56135cd66eb0 source=0x56135d1d7c00 func=0x56135af746c0 opaque=0x56135bf06400
22806@1547735341399865943 qio_task_thread_start Task thread start task=0x56135cd66eb0 worker=0x56135af72e50 opaque=0x56135c071d70
22806@1547735341399976816 qio_task_thread_run Task thread run task=0x56135cd66eb0
This tool is clever in that it will automatically change the
SYSTEMTAP_TAPSET env variable to point to the directory containing the
right set of probes for the QEMU binary path you give it. This is useful
if you have QEMU installed in /usr but are trying to test and trace a
binary in /home/berrange/usr/qemu-git. In that case you'd do
$ qemu-trace-stap run /home/berrange/usr/qemu-git/bin/qemu-system-x86_64 'qio*'
And it'll make sure /home/berrange/usr/qemu-git/share/systemtap/tapset
is used for the trace session
The 'qemu-trace-stap' script takes a verbose arg so you can understand
what it is running
$ qemu-trace-stap run /home/berrange/usr/qemu-git/bin/qemu-system-x86_64 'qio*'
Using tapset dir '/home/berrange/usr/qemu-git/share/systemtap/tapset' for binary '/home/berrange/usr/qemu-git/bin/qemu-system-x86_64'
Compiling script 'probe qemu.system.x86_64.log.qio* {}'
Running script, <Ctrl>-c to quit
...trace output...
It can enable multiple probes at once
$ qemu-trace-stap run qemu-system-x86_64 'qio*' 'qcrypto*' 'buffer*'
By default it monitors all existing running processes and all future
launched proceses. This can be restricted to a specific PID using the
--pid arg
$ qemu-trace-stap run --pid 2532 qemu-system-x86_64 'qio*'
Finally if you can't remember what probes are valid it can tell you
$ qemu-trace-stap list qemu-system-x86_64
ahci_check_irq
ahci_cmd_done
ahci_dma_prepare_buf
ahci_dma_prepare_buf_fail
ahci_dma_rw_buf
ahci_irq_lower
...snip...
Or list just those matching a prefix pattern
$ qemu-trace-stap list -v qemu-system-x86_64 'qio*'
Using tapset dir '/home/berrange/usr/qemu-git/share/systemtap/tapset' for binary '/home/berrange/usr/qemu-git/bin/qemu-system-x86_64'
Listing probes with name 'qemu.system.x86_64.log.qio*'
qio_channel_command_abort
qio_channel_command_new_pid
qio_channel_command_new_spawn
qio_channel_command_wait
qio_channel_file_new_fd
...snip...
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190123120016.4538-5-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The next commit will add an EXAMPLES section to qemu-nbd.8;
for that to work, we need to recognize EXAMPLES in texi2pod.
We also need to add a dependency from all man pages against
the generator script, since a change to the generator may
cause the resulting man page to differ.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20190117193658.16413-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The icon associated with a GtkWindow is just a hint to window managers
and not all of them will honour it. Some will instead want to show the
icon listed by the .desktop file. The desktop file is located based on
the application ID, which is set using g_set_prgname. QEMU has not
historically provided a desktop file or set its app ID, so it got a
broken icon in GNOME shell, which is now fixed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190110120047.25369-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QEMU currently installs logos to $prefix/share/qemu/ which means no GUI
toolkit or applications can find them by default.
The accepted standards for desktop applications declare that application
logos / icons should be installed under $prefix/share/icons, so use this
directory location.
Pre-rendered icons are provided at the standard sizes expected for GUI
applications, along with the scalable SVG, to ensure maximum portability.
The PNGs are rendered from the SVG using inkscape, however, this is not
wired up into the default make rules to avoid requiring inkscape as a
mandatory tool in build systems / developer workstations.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190110120047.25369-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix Commit a5d2f6f877 (contrib/rdmacm-mux: Add implementation
of RDMA User MAD multiplexer).
The above commit introduces a new contrib target, adding a global dependency
to libumad library in case pvrdma configuration option is enabled.
Clang forbids it:
clang-6.0: error: -libumad: 'linker' input unused
[-Werror,-Wunused-command-line-argument]
Fix by limiting the scope to the rdmacm-mux target itself.
Reported-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190118124614.24548-4-marcel.apfelbaum@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
This will allow to have cflags for the whole slirp.mo -objs.
It makes it possible to build tests that links only with
slirp-obj-y (and not the whole common-obj).
It is also a step towards building slirp as a shared library, although
this requires a bit more thoughts to build with
net/slirp.o (CONFIG_SLIRP would need to be 'm') and other build issues.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Copy the content into the sl and sv files (the only ones left which are
not generated by qemu-keymap).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-4-kraxel@redhat.com
It doesn't define any keys, only includes "common".
Which makes it effectively an "en-us" map.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-3-kraxel@redhat.com
"common" is the only file using it, so we can just include it directly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-2-kraxel@redhat.com
RDMA MAD kernel module (ibcm) disallow more than one MAD-agent for a
given MAD class.
This does not go hand-by-hand with qemu pvrdma device's requirements
where each VM is MAD agent.
Fix it by adding implementation of RDMA MAD multiplexer service which on
one hand register as a sole MAD agent with the kernel module and on the
other hand gives service to more than one VM.
Design Overview:
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
----------------
A server process is registered to UMAD framework (for this to work the
rdma_cm kernel module needs to be unloaded) and creates a unix socket to
listen to incoming request from clients.
A client process (such as QEMU) connects to this unix socket and
registers with its own GID.
TX:
----
When client needs to send rdma_cm MAD message it construct it the same
way as without this multiplexer, i.e. creates a umad packet but this
time it writes its content to the socket instead of calling umad_send().
The server, upon receiving such a message fetch local_comm_id from it so
a context for this session can be maintain and relay the message to UMAD
layer by calling umad_send().
RX:
----
The server creates a worker thread to process incoming rdma_cm MAD
messages. When an incoming message arrived (umad_recv()) the server,
depending on the message type (attr_id) looks for target client by
either searching in gid->fd table or in local_comm_id->fd table. With
the extracted fd the server relays to incoming message to the client.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
configure gets the version number from VERSION, and writes it to
config-host.mak. The make dependency for that is missing. Because of
that, a rebuild after a VERSION change may not pick up the change.
Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181214084754.23854-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Adding a new qapi module had some rather tedious repetition to
wire it into Makefile, Makefile.objs, and .gitignore (for example,
see commit bf42508f and its followup b61acdec). For make, add some
indirection by taking advantage of GNU Make string processing to
expand a list of module names into all the required artifacts, so
that future additions of a new module need only touch the list of
module names. And for gitignore, use globs to cover all generated
file names.
The list has to live in Makefile.objs, due to the way that
our unnest-vars macro slirps in that file without remembering
any definition of $(QAPI_MODULES) from Makefile.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20181116200016.2080785-1-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Difficult to make use of if not installed
Fixes: cd1bfd5ef3 ("seabios: update bios and vgabios binaries")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 153936155938.28040.11513367417790075721.stgit@gimli.home
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
elf2dmp is a converter from ELF dump (produced by 'dump-guest-memory') to
Windows MEMORY.DMP format (also know as 'Complete Memory Dump') which can be
opened in WinDbg.
This tool can help if VMCoreInfo device/driver is absent in Windows VM and
'dump-guest-memory -w' is not available but dump can be created in ELF format.
The tool works as follows:
1. Determine the system paging root looking at GS_BASE or KERNEL_GS_BASE
to locate the PRCB structure and finds the kernel CR3 nearby if QEMU CPU
state CR3 is not suitable.
2. Find an address within the kernel image by dereferencing the first
IDT entry and scans virtual memory upwards until the start of the
kernel.
3. Download a PDB matching the kernel from the Microsoft symbol store,
and figure out the layout of certain relevant structures necessary for
the dump.
4. Populate the corresponding structures in the memory image and create
the appropriate dump header.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com>
Message-Id: <1535546488-30208-3-git-send-email-viktor.prutyanov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
EDID is a metadata format to describe monitors. On physical hardware
the monitor has an eeprom with that data block which can be read over
i2c bus.
On a linux system you can usually find the EDID data block in
/sys/class/drm/$card/$connector/edid. xorg ships a edid-decode utility
which you can use to turn the blob into readable form.
I think it would be a good idea to use EDID for virtual displays too.
Needs changes in both qemu and guest kms drivers. This patch is the
first step, it adds an generator for EDID blobs to qemu. Comes with a
qemu-edid test tool included.
With EDID we can pass more information to the guest. Names and serial
numbers, so the guests display configuration has no boring "Unknown
Monitor". List of video modes. Display resolution, pretty important
in case we want add HiDPI support some day.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-2-kraxel@redhat.com
Make sure that the docs get correctly regenerated when the
file qemu-deprecated.texi has been changed.
Fixes: 44c67847e3
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit f99ce85279178385f204a52236f855c879c29cdc)
If you don't want to compile everything, you configure
config-devices.mak. And then make clean remove it, and make will
create a default one without your configuration. Fix it by not
removing it on clean target. Remove it instead on distclean.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
Remove it instead on distclean.
With the recent set of CPU hardware vulnerabilities on x86, it is
increasingly difficult to understand which CPU configurations are
good to use and what flaws they might be vulnerable to.
This doc attempts to help management applications and administrators in
picking sensible CPU configuration on x86 hosts. It outlines which of
the named CPU models are good choices, and describes which extra CPU
flags should be enabled to allow the guest to mitigate hardware flaws.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180627160103.13634-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will build a coverage report under the current directory in
reports/coverage. At the users option a report can be generated by
directly invoking something like:
make foo/bar/coverage-report.html
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This can be used to remove any stale coverage data before any
particular test run. This is useful for analysing individual tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>---
This reverts commit 208ecb3e1a. This was
causing problems by making DEF_TARGET_LIST pointless and having to
jump through hoops to build on mingw with a dully enabled config.
This includes a change to fix the per-guest TCG test probe which was
added after 208ecb3 and used TARGET_LIST.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
This commit removes the PYTHON_UTF8 workaround. The problem with setting
LC_ALL= LANG=C LC_CTYPE=en_US.UTF-8
is that the en_US.UTF-8 locale might not be available. In this case
setting above locales results in build errors even though another UTF-8
locale was originally set [1]. The only stable way of fixing the
encoding problem is by specifying the encoding in Python, like the
previous commit does.
[1] https://bugs.gentoo.org/657766
Signed-off-by: Arfrever Frehtes Taifersar Arahesis <arfrever.fta@gmail.com>
Signed-off-by: Matthias Maier <tamiko@43-1.org>
Message-Id: <20180618175958.29073-3-armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In appears the input keymap for osx was forgotten in the commit that
converted the gtk frontend to keycodemapdb. Add it.
Fixes: 2ec78706 ("ui: convert GTK and SDL1 frontends to keycodemapdb")
CC: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
Message-id: 1528933916-40670-1-git-send-email-keno@juliacomputing.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit 9578f8cc3e.
The patch snuck in by accident without having been posted to
qemu-devel. It's entirely redundant: existing target print-% already
serves the purpose.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180504054241.6833-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
disable the build of binaries not needed for linux-user,
update of qemu-binfmt-conf.sh and cleanup around is_error()
-----BEGIN PGP SIGNATURE-----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=oWiH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.0-pull-request' into staging
Fixes in syscall numbers,
disable the build of binaries not needed for linux-user,
update of qemu-binfmt-conf.sh and cleanup around is_error()
# gpg: Signature made Tue 12 Jun 2018 11:57:18 BST
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-3.0-pull-request:
linux-user/sparc64: Add inotify_rm_watch and tee syscalls
linux-user/microblaze: Fix typo in accept4 syscall
linux-user/hppa: Fix typo in mknodat syscall
linux-user/alpha: Fix epoll syscalls
qemu-binfmt-conf.sh: ignore the OS/ABI field
linux-user: disable qemu-bridge-helper and socket_scm_helper build
linux-user: Use is_error() to avoid warnings and make the code clearer
linux-user: Export use is_error(), use it to avoid warnings
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
linux-user targets don't need them, and if we ask to build statically
linked binaries, some static libraries they need are not available.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180605160958.5434-1-laurent@vivier.eu>
Python 2.7 (the minimum Python version we require) provides
collections.OrderedDict on the standard library, so we don't need
to carry our own implementation.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180608175252.25110-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To be more accurate on its purpose and make code that looks for a certain
target out of this variable more readable.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This adds a separate schema file for all job-related definitions that
aren't tied to the block layer.
For a start, move the enums JobType, JobStatus and JobVerb.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Fixes 722cd74964
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180416093719.2543-1-mjt@msgid.tls.msk.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJapqaMAAoJEL/70l94x66DQoUH/Rvg+a8giz/SrEA4P8D3Cb2z
4GNbNUUoy4oU0ltD5IAMskMwpOsvl1batE0D+pKIlfO9NV4+Cj2kpgo0p9TxoYqM
VCby3wRtx27zb5nVytC6M++iIKXmeEMqXmFw61I6umddNPSl4IR3hiHEE0DM+7dV
UPIOvJeEiazyQaw3Iw+ZctNn8dDBKc/+6oxP9xRcYTaZ6hB4G9RZkqGNNSLcJkk7
R0UotdjzIZhyWMOkjIwlpTF4sWv8gsYUV4bPYKMYho5B0Obda2dBM3I1kpA8yDa/
xZ5lheOaAVBZvM5aMIcaQPa65MO9hLyXFmhMOgyfpJhLBBz6Qpa4OLLI6DeTN+0=
=UAgA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
# gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
tcg: fix cpu_io_recompile
replay: update documentation
replay: save vmstate of the asynchronous events
replay: don't process async events when warping the clock
scripts/replay-dump.py: replay log dumper
replay: avoid recursive call of checkpoints
replay: check return values of fwrite
replay: push replay_mutex_lock up the call tree
replay: don't destroy mutex at exit
replay: make locking visible outside replay code
replay/replay-internal.c: track holding of replay_lock
replay/replay.c: bump REPLAY_VERSION again
replay: save prior value of the host clock
replay: added replay log format description
replay: fix save/load vm for non-empty queue
replay: fixed replay_enable_events
replay: fix processing async events
cpu-exec: fix exception_index handling
hw/i386/pc: Factor out the superio code
hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/i386-softmmu.mak
# default-configs/x86_64-softmmu.mak
SeaBIOS blob which is currently shipped with QEMU
doesn't need acpi-dsdt.aml nor is able to use it
and code that loaded it in QEMU was removed by
(commit 9fb7aaaf4c "pc: drop external DSDT loading")
in 2013.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since commit 67a1de0d19 there is no space anymore between the
version number and the parentheses when running configure with
--with-pkgversion=foo :
$ qemu-system-s390x --version
QEMU emulator version 2.11.50(foo)
But the space is included when building without that option
when building from a git checkout:
$ qemu-system-s390x --version
QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty)
The same confusion exists with the "query-version" QMP command.
Let's fix this by introducing a proper QEMU_FULL_VERSION definition
that includes the space and parentheses, while the QEMU_PKGVERSION
should just cleanly contain the package version string itself.
Note that this also changes the behavior of the "query-version" QMP
command (the space and parentheses are not included there anymore),
but that's supposed to be OK since the strings there are not meant
to be parsed by other tools.
Fixes: 67a1de0d19
Buglink: https://bugs.launchpad.net/qemu/+bug/1673373
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Available when configure --enable-modules.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180306161728.20890-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add audio/ to common-obj-m variable.
Also run both audio and ui variables through unnest-vars.
This avoids sdl.mo (exists in both audio/ and ui/) name clashes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306074053.22856-4-kraxel@redhat.com
Now that gtk support builds as a module, CONFIG_GTK changed from
y to m. Adjust Makefile correspondingly.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Message-id: 20180307155517.32570-1-brogers@suse.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC.
This is not a complete implementation yet with a lot of components
still missing but enough for the U-Boot firmware to start and to boot
a Linux kernel or AROS.
Signed-off-by: François Revol <revol@free.fr>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
