We might not start at the beginning of the memory region. Let's
calculate the offset into the memory region via the difference in the
host addresses.
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Fixes: ffab1be706 ("tpm: clear RAM when "memory overwrite" requested")
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Claudio Fontana <cfontana@suse.de>
Cc: Thomas Huth <thuth@redhat.com>
Cc: "Alex Bennée" <alex.bennee@linaro.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210727082545.17934-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We want to rate-limit MEMORY_DEVICE_SIZE_CHANGE events per device,
otherwise we can lose some events for devices. We can now use the
qom-path to reliably map an event to a device and make rate-limiting
device-aware.
This was noticed by starting a VM with two virtio-mem devices that each
have a requested size > 0. The Linux guest will initialize both devices
in parallel, resulting in losing MEMORY_DEVICE_SIZE_CHANGE events for
one of the devices.
Fixes: 722a3c783e ("virtio-pci: Send qapi events when the virtio-mem size changes")
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210929162445.64060-4-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As we might not always have a device id, it is impossible to always
match MEMORY_DEVICE_SIZE_CHANGE events to an actual device. Let's
include the qom-path in the event, which allows for reliable mapping of
events to devices.
Fixes: 722a3c783e ("virtio-pci: Send qapi events when the virtio-mem size changes")
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210929162445.64060-3-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apparently, we don't have to duplicate the string.
Fixes: 722a3c783e ("virtio-pci: Send qapi events when the virtio-mem size changes")
Cc: qemu-stable@nongnu.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210929162445.64060-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As discussed in issue 614, we're shipping GCC 7.4.0 as the
system compiler in NetBSD 9, the most recent stable branch,
and are still actively interested in QEMU on this platform.
The differences between GCC 7.5.0 and 7.4.0 are trivial.
Signed-off-by: Nia Alarie <nia@NetBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <YVcpe79I0rly1HJh@homeworld.netbsd.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-14-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eh. Not worth the fuss today. There are bigger fish to fry.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-13-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-12-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The fix for this comment is forthcoming in a future commit, but this
will keep me honest. The linting configuration in ./python/setup.cfg
prohibits 'FIXME' comments. A goal of this long-running series is to
move ./scripts/qapi to ./python/qemu/qapi so that the QAPI generator is
regularly type-checked by GitLab CI.
This comment is a time-bomb to force me to address this issue prior to
that step.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Annotations do not change runtime behavior.
This commit consists of only annotations.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-10-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Adding static types causes a cycle in the QAPI generator:
[schema -> expr -> parser -> schema]. It exists because the QAPIDoc
class needs the names of types defined by the schema module, but the
schema module needs to import both expr.py/parser.py to do its actual
parsing.
Ultimately, the layering violation is that parser.py should not have any
knowledge of specifics of the Schema. QAPIDoc performs double-duty here
both as a parser *and* as a finalized object that is part of the schema.
In this patch, add the offending type hints alongside the workaround to
avoid the cycle becoming a problem at runtime. See
https://mypy.readthedocs.io/en/latest/runtime_troubles.html#import-cycles
for more information on this workaround technique.
I see three ultimate resolutions here:
(1) Just keep this patch and use the TYPE_CHECKING trick to eliminate
the cycle which is only present during static analysis.
(2) Don't bother to annotate connect_member() et al, give them 'object'
or 'Any'. I don't particularly like this, because it diminishes the
usefulness of type hints for documentation purposes. Still, it's an
extremely quick fix.
(3) Reimplement doc <--> definition correlation directly in schema.py,
integrating doc fields directly into QAPISchemaMember and relieving
the QAPIDoc class of the responsibility. Users of the information
would instead visit the members first and retrieve their
documentation instead of the inverse operation -- visiting the
documentation and retrieving their members.
My preference is (3), but in the short-term (1) is the easiest way to
have my cake (strong type hints) and eat it too (Not have import
cycles). Do (1) for now, but plan for (3).
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-9-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Here's the weird bit. QAPIDoc generally expects -- virtually everywhere
-- that it will always have a current section. The sole exception to
this is in the case that end_comment() is called, which leaves us with
*no* section. However, in this case, we also don't expect to actually
ever mutate the comment contents ever again.
NullSection is just a Null-object that allows us to maintain the
invariant that we *always* have a current section, enforced by static
typing -- allowing us to type that field as QAPIDoc.Section instead of
the more ambiguous Optional[QAPIDoc.Section].
end_section is renamed to switch_section and now accepts as an argument
the new section to activate, clarifying that no callers ever just
unilaterally end a section; they only do so when starting a new section.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The "if self._section" clause in end_section is mysterious: In which
circumstances might we end a section when we don't have one?
QAPIDoc always expects there to be a "current section", only except
after a call to end_comment(). This actually *shouldn't* ever be 'None',
so let's remove that logic so I don't wonder why it's like this again in
three months.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
True, we do not check the validity of this symbol -- but we don't check
the validity of definition names during parse, either -- that happens
later, during the expr check. I don't want to introduce a dependency on
expr.py:check_name_str here and introduce a cycle.
Instead, rest assured that a documentation block is required for each
definition. This requirement uses the names of each section to ensure
that we fulfilled this requirement.
e.g., let's say that block-core.json has a comment block for
"Snapshot!Info" by accident. We'll see this error message:
In file included from ../../qapi/block.json:8:
../../qapi/block-core.json: In struct 'SnapshotInfo':
../../qapi/block-core.json:38: documentation comment is for 'Snapshot!Info'
That's a pretty decent error message.
Now, let's say that we actually mangle it twice, identically:
../../qapi/block-core.json: In struct 'Snapshot!Info':
../../qapi/block-core.json:38: struct has an invalid name
That's also pretty decent. If we forget to fix it in both places, we'll
just be back to the first error.
Therefore, let's just drop this FIXME and adjust the error message to
not imply a more thorough check than is actually performed.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Several QGA definitions omit a blank line after the symbol
declaration. This works OK currently, but it's the only place where we
do this. Adjust it for consistency.
Future commits may wind up enforcing this formatting.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Pylint informs us we're not using these arguments. Oops, it's
right. Correct the error message and remove the remaining unused
parameter.
Fix test output now that the error message is improved.
Fixes: e151941d1b
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-4-jsnow@redhat.com>
[Commit message formatting tweaked]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
New pylint warning. I could silence it, but this is the only occurrence
in the entire tree, including everything in iotests/ and python/. Easier
to just change this one instance.
(The warning is emitted in cases where you are fetching the values
anyway, so you may as well just take advantage of the iterator to avoid
redundant lookups.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-3-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Pylint 2.11.x adds this warning. We're not yet ready to pursue that
conversion, so silence it for now.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
* Hyper-V englightenment functionality
* Documentation cleanups
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmFXQSQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNJUgf/bi96/9B1/6YhZ15l0jzxhtyNaWJ6
nLtMrAsafbiPM8z3WKQ2BY3hLfRwvPbn8TZkO+mIwvfHP5gQDfYXL8xwW0KmxpPo
1c8xjV85yqjVMFd2FFvSrLfpUhR8Pduti5zfDLcbFTzjbR08RRRbVjaVNtrm6fpE
/sfZRl6vC3Znt6e9dM1n5//WDV2yGVEcD9BCbjgnEIf6fBr9pSNAoV/9bd5l+a9M
kKq+SD3MIozipi96JX02447h1qhfrthAEbYhJc9XBh1Z7Ah6DldHasWiz07+cAp6
ggwWMJ3p6ss07tgaZ1OlN8ivifRJ1+oFVXZOixAKlFQn6yhXyhZUjEMQdg==
=3LXK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* -smp cleanpus
* Hyper-V englightenment functionality
* Documentation cleanups
# gpg: Signature made Fri 01 Oct 2021 01:11:00 PM EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* remotes/bonzini/tags/for-upstream: (29 commits)
docs: reorganize testing.rst
docs: move gcov section at the end of testing.rst
docs: reorganize tcg-plugins.rst
docs: reorganize qgraph.rst
docs: put "make" information together in build-system.rst
docs: move notes inside the body of the document
docs: name included files ".rst.inc"
i386: Change the default Hyper-V version to match WS2016
i386: Make Hyper-V version id configurable
i386: Implement pseudo 'hv-avic' ('hv-apicv') enlightenment
i386: Move HV_APIC_ACCESS_RECOMMENDED bit setting to hyperv_fill_cpuids()
i386: Support KVM_CAP_HYPERV_ENFORCE_CPUID
i386: Support KVM_CAP_ENFORCE_PV_FEATURE_CPUID
machine: Put all sanity-check in the generic SMP parser
machine: Use g_autoptr in machine_set_smp
machine: Move smp_prefer_sockets to struct SMPCompatProps
machine: Remove smp_parse callback from MachineClass
machine: Make smp_parse generic enough for all arches
machine: Tweak the order of topology members in struct CpuTopology
machine: Use ms instead of global current_machine in sanity-check
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
KVM implements some Hyper-V 2016 functions so providing WS2008R2 version
is somewhat incorrect. While generally guests shouldn't care about it
and always check feature bits, it is known that some tools in Windows
actually check version info.
For compatibility reasons make the change for 6.2 machine types only.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210902093530.345756-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up the heading levels to use === --- ~~~ ^^^ '''. Reorganize the
outline for the Avocado part, and always include headings for the
class names.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, we hardcode Hyper-V version id (CPUID 0x40000002) to
WS2008R2 and it is known that certain tools in Windows check this. It
seems useful to provide some flexibility by making it possible to change
this info at will. CPUID information is defined in TLFS as:
EAX: Build Number
EBX Bits 31-16: Major Version
Bits 15-0: Minor Version
ECX Service Pack
EDX Bits 31-24: Service Branch
Bits 23-0: Service Number
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210902093530.345756-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The enlightenment allows to use Hyper-V SynIC with hardware APICv/AVIC
enabled. Normally, Hyper-V SynIC disables these hardware features and
suggests the guest to use paravirtualized AutoEOI feature. Linux-4.15
gains support for conditional APICv/AVIC disablement, the feature
stays on until the guest tries to use AutoEOI feature with SynIC. With
'HV_DEPRECATING_AEOI_RECOMMENDED' bit exposed, modern enough Windows/
Hyper-V versions should follow the recommendation and not use the
(unwanted) feature.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210902093530.345756-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation to enabling Hyper-V + APICv/AVIC move
HV_APIC_ACCESS_RECOMMENDED setting out of kvm_hyperv_properties[]: the
'real' feature bit for the vAPIC features is HV_APIC_ACCESS_AVAILABLE,
HV_APIC_ACCESS_RECOMMENDED is a recommendation to use the feature which
we may not always want to give.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210902093530.345756-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up the heading levels to use === --- ~~~, and move the command line
building near to the other execution steps.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By default, KVM allows the guest to use all currently supported Hyper-V
enlightenments when Hyper-V CPUID interface was exposed, regardless of if
some features were not announced in guest visible CPUIDs. hv-enforce-cpuid
feature alters this behavior and only allows the guest to use exposed
Hyper-V enlightenments. The feature is supported by Linux >= 5.14 and is
not enabled by default in QEMU.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210902093530.345756-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By default, KVM allows the guest to use all currently supported PV features
even when they were not announced in guest visible CPUIDs. Introduce a new
"kvm-pv-enforce-cpuid" flag to limit the supported feature set to the
exposed features. The feature is supported by Linux >= 5.10 and is not
enabled by default in QEMU.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210902093530.345756-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Put both sanity-check of the input SMP configuration and sanity-check
of the output SMP configuration uniformly in the generic parser. Then
machine_set_smp() will become cleaner, also all the invalid scenarios
can be tested only by calling the parser.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-16-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now we have a common structure SMPCompatProps used to store information
about SMP compatibility stuff, so we can also move smp_prefer_sockets
there for cleaner code.
No functional change intended.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-15-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now we have a generic smp parser for all arches, and there will
not be any other arch specific ones, so let's remove the callback
from MachineClass and call the parser directly.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-14-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the only difference between smp_parse and pc_smp_parse
is the support of dies parameter and the related error reporting.
With some arch compat variables like "bool dies_supported", we can
make smp_parse generic enough for all arches and the PC specific
one can be removed.
Making smp_parse() generic enough can reduce code duplication and
ease the code maintenance, and also allows extending the topology
with more arch specific members (e.g., clusters) in the future.
Suggested-by: Andrew Jones <drjones@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-13-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all the possible topology parameters are integrated in struct
CpuTopology, tweak the order of topology members to be "cpus/sockets/
dies/cores/threads/maxcpus" for readability and consistency. We also
tweak the comment by adding explanation of dies parameter.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210929025816.21076-12-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the sanity-check of smp_cpus and max_cpus against mc in function
machine_set_smp(), we are now using ms->smp.max_cpus for the check
but using current_machine->smp.max_cpus in the error message.
Tweak this by uniformly using the local ms.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210929025816.21076-11-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the real SMP hardware topology world, it's much more likely that
we have high cores-per-socket counts and few sockets totally. While
the current preference of sockets over cores in smp parsing results
in a virtual cpu topology with low cores-per-sockets counts and a
large number of sockets, which is just contrary to the real world.
Given that it is better to make the virtual cpu topology be more
reflective of the real world and also for the sake of compatibility,
we start to prefer cores over sockets over threads in smp parsing
since machine type 6.2 for different arches.
In this patch, a boolean "smp_prefer_sockets" is added, and we only
enable the old preference on older machines and enable the new one
since type 6.2 for all arches by using the machine compat mechanism.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-10-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 80d7835749 (qemu-options: rewrite help for -smp options),
the preference of sockets/cores in -smp parsing is considered liable
to change, and actually we are going to change it in a coming commit.
So it'll be more stable to use detailed -smp CLIs in the testcases
that have strong dependency on the parsing results.
Currently, test_def_cpu_split use "-smp 8" and will get 8 CPU sockets
based on current parsing rule. But if we change to prefer cores over
sockets we will get one CPU socket with 8 cores, and this testcase
will not get expected numa set by default on x86_64 (Ok on aarch64).
So now explicitly use "-smp 8,sockets=8" to avoid affect from parsing
logic change.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210929025816.21076-9-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 80d7835749 (qemu-options: rewrite help for -smp options),
the preference of sockets/cores in -smp parsing is considered liable
to change, and actually we are going to change it in a coming commit.
So it'll be more stable to use detailed -smp CLIs in testing if we
have strong dependency on the parsing results.
pc_dynamic_cpu_cfg currently assumes/needs that there will be 2 CPU
sockets with "-smp 2". To avoid breaking the test because of parsing
logic change, now explicitly use "-smp 2,sockets=2".
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210929025816.21076-8-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have two requirements for a valid SMP configuration:
the product of "sockets * cores * threads" must represent all the
possible cpus, i.e., max_cpus, and then must include the initially
present cpus, i.e., smp_cpus.
So we only need to ensure 1) "sockets * cores * threads == maxcpus"
at first and then ensure 2) "maxcpus >= cpus". With a reasonable
order of the sanity check, we can simplify the error reporting code.
When reporting an error message we also report the exact value of
each topology member to make users easily see what's going on.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210929025816.21076-7-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently we directly calculate the omitted cpus based on the given
incomplete collection of parameters. This makes some cmdlines like:
-smp maxcpus=16
-smp sockets=2,maxcpus=16
-smp sockets=2,dies=2,maxcpus=16
-smp sockets=2,cores=4,maxcpus=16
not work. We should probably set the value of cpus to match maxcpus
if it's omitted, which will make above configs start to work.
So the calculation logic of cpus/maxcpus after this patch will be:
When both maxcpus and cpus are omitted, maxcpus will be calculated
from the given parameters and cpus will be set equal to maxcpus.
When only one of maxcpus and cpus is given then the omitted one
will be set to its counterpart's value. Both maxcpus and cpus may
be specified, but maxcpus must be equal to or greater than cpus.
Note: change in this patch won't affect any existing working cmdlines
but allows more incomplete configs to be valid.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-6-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are currently using maxcpus to calculate the omitted sockets
but using cpus to calculate the omitted cores/threads. This makes
cmdlines like:
-smp cpus=8,maxcpus=16
-smp cpus=8,cores=4,maxcpus=16
-smp cpus=8,threads=2,maxcpus=16
work fine but the ones like:
-smp cpus=8,sockets=2,maxcpus=16
-smp cpus=8,sockets=2,cores=4,maxcpus=16
-smp cpus=8,sockets=2,threads=2,maxcpus=16
break the sanity check.
Since we require for a valid config that the product of "sockets * cores
* threads" should equal to the maxcpus, we should uniformly use maxcpus
to calculate their omitted values.
Also the if-branch of "cpus == 0 || sockets == 0" was split into two
branches of "cpus == 0" and "sockets == 0" so that we can clearly read
that we are parsing the configuration with a preference on cpus over
sockets over cores over threads.
Note: change in this patch won't affect any existing working cmdlines
but improves consistency and allows more incomplete configs to be valid.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-5-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To pave the way for the functional improvement in later patches,
make some refactor/cleanup for the smp parsers, including using
local maxcpus instead of ms->smp.max_cpus in the calculation,
defaulting dies to 0 initially like other members, cleanup the
sanity check for dies.
We actually also fix a hidden defect by avoiding directly using
the provided *zero value* in the calculation, which could cause
a segment fault (e.g. using dies=0 in the calculation).
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-4-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the SMP configuration, we should either provide a topology
parameter with a reasonable value (greater than zero) or just
omit it and QEMU will compute the missing value.
The users shouldn't provide a configuration with any parameter
of it specified as zero (e.g. -smp 8,sockets=0) which could
possibly cause unexpected results in the -smp parsing. So we
deprecate this kind of configurations since 6.2 by adding the
explicit sanity check.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-3-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The explanation of @cores should be "number of cores per die" but
not "number of cores per thread". Let's fix it.
Fixes: 1e63fe6858 ("machine: pass QAPI struct to mc->smp_parse")
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-2-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With signal trampolines safely off the stack for all
guests besides hppa, we can re-enable this test.
It does show up a problem with sh4 (unrelated?),
so leave that test disabled for now.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-27-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
All targets now define TARGET_ARCH_HAS_SIGTRAMP_PAGE.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-26-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
