We are sending a migration event of MIGRATION_STATUS_SETUP at
qemu_start_incoming_migration but never actually setting the state.
This creates a window between qmp_migrate_incoming and
process_incoming_migration_co where the migration status is still
MIGRATION_STATUS_NONE. Calling query-migrate during this time will
return an empty response even though the incoming migration command
has already been issued.
Commit 7cf1fe6d68 ("migration: Add migration events on target side")
has added support to the 'events' capability to the incoming part of
migration, but chose to send the SETUP event without setting the
state. I'm assuming this was a mistake.
This introduces a change in behavior, any QMP client waiting for the
SETUP event will hang, unless it has previously enabled the 'events'
capability. Having the capability enabled is sufficient to continue to
receive the event.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-5-farosas@suse.de>
Extend the migration URI to support file:<filename>. This can be used for
any migration scenario that does not require a reverse path. It can be
used as an alternative to 'exec:cat > file' in minimized containers that
do not contain /bin/sh, and it is easier to use than the fd:<fdname> URI.
It can be used in HMP commands, and as a qemu command-line parameter.
For best performance, guest ram should be shared and x-ignore-shared
should be true, so guest pages are not written to the file, in which case
the guest may remain running. If ram is not so configured, then the user
is advised to stop the guest first. Otherwise, a busy guest may re-dirty
the same page, causing it to be appended to the file multiple times,
and the file may grow unboundedly. That issue is being addressed in the
"fixed-ram" patch series.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1694182931-61390-2-git-send-email-steven.sistare@oracle.com>
In the function qmp_migrate(), yank_unregister_instance() gets called
twice which isn't required. Hence, refactoring it so that it gets called
during the local_error cleanup.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Message-ID: <20230621130940.178659-3-tejus.gk@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now that the return path thread is allowed to finish during a paused
migration, we can move the cleanup of the QEMUFiles to the main
migration thread.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-9-farosas@suse.de>
Replace the return path retry logic with finishing and restarting the
thread. This fixes a race when resuming the migration that leads to a
segfault.
Currently when doing postcopy we consider that an IO error on the
return path file could be due to a network intermittency. We then keep
the thread alive but have it do cleanup of the 'from_dst_file' and
wait on the 'postcopy_pause_rp' semaphore. When the user issues a
migrate resume, a new return path is opened and the thread is allowed
to continue.
There's a race condition in the above mechanism. It is possible for
the new return path file to be setup *before* the cleanup code in the
return path thread has had a chance to run, leading to the *new* file
being closed and the pointer set to NULL. When the thread is released
after the resume, it tries to dereference 'from_dst_file' and crashes:
Thread 7 "return path" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffd1dbf700 (LWP 9611)]
0x00005555560e4893 in qemu_file_get_error_obj (f=0x0, errp=0x0) at ../migration/qemu-file.c:154
154 return f->last_error;
(gdb) bt
#0 0x00005555560e4893 in qemu_file_get_error_obj (f=0x0, errp=0x0) at ../migration/qemu-file.c:154
#1 0x00005555560e4983 in qemu_file_get_error (f=0x0) at ../migration/qemu-file.c:206
#2 0x0000555555b9a1df in source_return_path_thread (opaque=0x555556e06000) at ../migration/migration.c:1876
#3 0x000055555602e14f in qemu_thread_start (args=0x55555782e780) at ../util/qemu-thread-posix.c:541
#4 0x00007ffff38d76ea in start_thread (arg=0x7fffd1dbf700) at pthread_create.c:477
#5 0x00007ffff35efa6f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
Here's the race (important bit is open_return_path happening before
migration_release_dst_files):
migration | qmp | return path
--------------------------+-----------------------------+---------------------------------
qmp_migrate_pause()
shutdown(ms->to_dst_file)
f->last_error = -EIO
migrate_detect_error()
postcopy_pause()
set_state(PAUSED)
wait(postcopy_pause_sem)
qmp_migrate(resume)
migrate_fd_connect()
resume = state == PAUSED
open_return_path <-- TOO SOON!
set_state(RECOVER)
post(postcopy_pause_sem)
(incoming closes to_src_file)
res = qemu_file_get_error(rp)
migration_release_dst_files()
ms->rp_state.from_dst_file = NULL
post(postcopy_pause_rp_sem)
postcopy_pause_return_path_thread()
wait(postcopy_pause_rp_sem)
rp = ms->rp_state.from_dst_file
goto retry
qemu_file_get_error(rp)
SIGSEGV
-------------------------------------------------------------------------------------------
We can keep the retry logic without having the thread alive and
waiting. The only piece of data used by it is the 'from_dst_file' and
it is only allowed to proceed after a migrate resume is issued and the
semaphore released at migrate_fd_connect().
Move the retry logic to outside the thread by waiting for the thread
to finish before pausing the migration.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-8-farosas@suse.de>
We'll start calling the await_return_path_close_on_source() function
from other parts of the code, so move all of the related checks and
tracepoints into it.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-7-farosas@suse.de>
This file is owned by the return path thread which is already doing
cleanup.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-6-farosas@suse.de>
It's not safe to call qemu_file_shutdown() on the to_dst_file without
first checking for the file's presence under the lock. The cleanup of
this file happens at postcopy_pause() and migrate_fd_cleanup() which
are not necessarily running in the same thread as migrate_fd_cancel().
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-5-farosas@suse.de>
We cannot call qemu_file_shutdown() on the return path file without
taking the file lock. The return path thread could be running it's
cleanup code and have just cleared the from_dst_file pointer.
Checking ms->to_dst_file for errors could also race with
migrate_fd_cleanup() which clears the to_dst_file pointer.
Protect both accesses by taking the file lock.
This was caught by inspection, it should be rare, but the next patches
will start calling this code from other places, so let's do the
correct thing.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-4-farosas@suse.de>
We don't need to set the rp_state.error right after a shutdown because
qemu_file_shutdown() always sets the QEMUFile error, so the return
path thread would have seen it and set the rp error itself.
Setting the error outside of the thread is also racy because the
thread could clear it after we set it.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-3-farosas@suse.de>
We hit intermit CI issue on failing at migration-test over the unit test
preempt/plain:
qemu-system-x86_64: Unable to read from socket: Connection reset by peer
Memory content inconsistency at 5b43000 first_byte = bd last_byte = bc current = 4f hit_edge = 1
**
ERROR:../tests/qtest/migration-test.c:300:check_guests_ram: assertion failed: (bad == 0)
(test program exited with status code -6)
Fabiano debugged into it and found that the preempt thread can quit even
without receiving all the pages, which can cause guest not receiving all
the pages and corrupt the guest memory.
To make sure preempt thread finished receiving all the pages, we can rely
on the page_requested_count being zero because preempt channel will only
receive requested page faults. Note, not all the faulted pages are required
to be sent via the preempt channel/thread; imagine the case when a
requested page is just queued into the background main channel for
migration, the src qemu will just still send it via the background channel.
Here instead of spinning over reading the count, we add a condvar so the
main thread can wait on it if that unusual case happened, without burning
the cpu for no good reason, even if the duration is short; so even if we
spin in this rare case is probably fine. It's just better to not do so.
The condvar is only used when that special case is triggered. Some memory
ordering trick is needed to guarantee it from happening (against the
preempt thread status field), so the main thread will always get a kick
when that triggers correctly.
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1886
Debugged-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-2-farosas@suse.de>
Add a new .save_prepare() handler to struct SaveVMHandlers. This handler
is called early, even before migration starts, and can be used by
devices to perform early checks.
Refactor migrate_init() to be able to return errors and call
.save_prepare() from there.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Initialization of mig_stats, compression_counters and VFIO bytes
transferred is hard-coded in migration code path and snapshot code path.
Make the code cleaner by initializing them in migrate_init().
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The functions in target.c are not static, yet they don't have a proper
migration prefix. Add such prefix.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
There are places in migration.c where the migration is marked failed with
MIGRATION_STATUS_FAILED, but the failure reason is never updated. Hence
libvirt doesn't know why the migration failed when it queries for it.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Message-ID: <20230621130940.178659-2-tejus.gk@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Extend query-migrate to provide throttle time and estimated
ring full time with dirty-limit capability enabled, through which
we can observe if dirty limit take effect during live migration.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <168733225273.5845.15871826788879741674-8@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Implement dirty-limit convergence algo for live migration,
which is kind of like auto-converge algo but using dirty-limit
instead of cpu throttle to make migration convergent.
Enable dirty page limit if dirty_rate_high_cnt greater than 2
when dirty-limit capability enabled, Disable dirty-limit if
migration be canceled.
Note that "set_vcpu_dirty_limit", "cancel_vcpu_dirty_limit"
commands are not allowed during dirty-limit live migration.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <168733225273.5845.15871826788879741674-7@git.sr.ht>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We're about to add more functions to this file so make it use the same
coding style as the rest of the code.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230607161306.31425-2-farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The only migrate_fd_error() call sites are in "migration/migration.c",
which is also where we define migrate_fd_error(). Make the function
static, and remove its declaration from "migration/migration.h".
Cc: Juan Quintela <quintela@redhat.com> (maintainer:Migration)
Cc: Leonardo Bras <leobras@redhat.com> (reviewer:Migration)
Cc: Peter Xu <peterx@redhat.com> (reviewer:Migration)
Cc: qemu-trivial@nongnu.org
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2018404
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It cuts back on those awkward, duplicated !(has_resume && resume)
expressions.
Cc: Juan Quintela <quintela@redhat.com> (maintainer:Migration)
Cc: Leonardo Bras <leobras@redhat.com> (reviewer:Migration)
Cc: Peter Xu <peterx@redhat.com> (reviewer:Migration)
Cc: qemu-trivial@nongnu.org
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2018404
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, VFIO bytes_transferred is not reset properly:
1. bytes_transferred is not reset after a VM snapshot (so a migration
following a snapshot will report incorrect value).
2. bytes_transferred is a single counter for all VFIO devices, however
upon migration failure it is reset multiple times, by each VFIO
device.
Fix it by introducing a new function vfio_reset_bytes_transferred() and
calling it during migration and snapshot start.
Remove existing bytes_transferred reset in VFIO migration state
notifier, which is not needed anymore.
Fixes: 3710586caa ("qapi: Add VFIO devices migration stats in Migration stats")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Implement switchover ack logic. This prevents the source from stopping
the VM and completing the migration until an ACK is received from the
destination that it's OK to do so.
To achieve this, a new SaveVMHandlers handler switchover_ack_needed()
and a new return path message MIG_RP_MSG_SWITCHOVER_ACK are added.
The switchover_ack_needed() handler is called during migration setup in
the destination to check if switchover ack is used by the migrated
device.
When switchover is approved by all migrated devices in the destination
that support this capability, the MIG_RP_MSG_SWITCHOVER_ACK return path
message is sent to the source to notify it that it's OK to do
switchover.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, it is only done when the iteration finishes successfully.
Not cleaning up the userfaultfd write protection can lead to
symptoms/issues such as the process hanging in memmove or GDB not
being able to attach.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20230526115908.196171-1-f.ebner@proxmox.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
1. Otherwise failed migration just drops guest-panicked state, which is
not good for management software.
2. We do keep different paused states like guest-panicked during
migration with help of global_state state.
3. We do restore running state on source when migration is cancelled or
failed.
4. "postmigrate" state is documented as "guest is paused following a
successful 'migrate'", so originally it's only for successful path
and we never documented current behavior.
Let's restore paused states like guest-panicked in case of cancel or
fail too. Allow same transitions like for inmigrate state.
This commit changes the behavior that was introduced by commit
42da5550d6 "migration: set state to post-migrate on failure" and
provides a bit different fix on related
https://bugzilla.redhat.com/show_bug.cgi?id=1355683
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230517123752.21615-6-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
No logic change here, only refactoring. That's a preparation for next
commit where we finally restore the stopped vm state on migration
failure or cancellation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230517123752.21615-5-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Actually global_state_store() can never fail. Let's get rid of extra
error paths.
To make things clear, use new runstate_get() and use same approach for
global_state_store() and global_state_store_running().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230517123752.21615-3-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Once there rename it to migration_transferred_bytes() and pass a
QEMUFile instead of a migration object.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230515195709.63843-7-quintela@redhat.com>
These way we can make them atomic and use this functions from any
place. I also moved all functions that use rate_limit to
migration-stats.
Functions got renamed, they are not qemu_file anymore.
qemu_file_rate_limit -> migration_rate_exceeded
qemu_file_set_rate_limit -> migration_rate_set
qemu_file_get_rate_limit -> migration_rate_get
qemu_file_reset_rate_limit -> migration_rate_reset
qemu_file_acct_rate_limit -> migration_rate_account.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Define and use RATE_LIMIT_DISABLED instead.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20230515195709.63843-2-quintela@redhat.com>
Let's make better public interface for COLO: instead of
colo_process_incoming_thread and not trivial logic around creating the
thread let's make simple colo_incoming_co(), hiding implementation from
generic code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515130640.46035-4-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Originally, migration_incoming_co was introduced by
25d0c16f62
"migration: Switch to COLO process after finishing loadvm"
to be able to enter from COLO code to one specific yield point, added
by 25d0c16f62.
Later in 923709896b
"migration: poll the cm event for destination qemu"
we reused this variable to wake the migration incoming coroutine from
RDMA code.
That was doubtful idea. Entering coroutines is a very fragile thing:
you should be absolutely sure which yield point you are going to enter.
I don't know how much is it safe to enter during qemu_loadvm_state()
which I think what RDMA want to do. But for sure RDMA shouldn't enter
the special COLO-related yield-point. As well, COLO code doesn't want
to enter during qemu_loadvm_state(), it want to enter it's own specific
yield-point.
As well, when in 8e48ac9586
"COLO: Add block replication into colo process" we added
bdrv_invalidate_cache_all() call (now it's called activate_all())
it became possible to enter the migration incoming coroutine during
that call which is wrong too.
So, let't make these things separate and disjoint: loadvm_co for RDMA,
non-NULL during qemu_loadvm_state(), and colo_incoming_co for COLO,
non-NULL only around specific yield.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515130640.46035-3-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Function is already quite long.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-7-quintela@redhat.com>
That the implementation does the check every 100 milliseconds is an
implementation detail that shouldn't be seen on the interfaz.
Notice that all callers of qemu_file_set_rate_limit() used the
division or pass 0, so this change is a NOP.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-4-quintela@redhat.com>
And it is the best way to not have rate_limit.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-2-quintela@redhat.com>
We generally require same set of capabilities on source and target.
Let's require x-colo capability to use COLO on target.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20230428194928.1426370-11-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
COLO is not listed as running state in migrate_is_running(), so, it's
theoretically possible to disable colo capability in COLO state and the
unexpected error in migration_iteration_finish() is reachable.
Let's disallow that in qmp_migrate_set_capabilities. Than the error
becomes absolutely unreachable: we can get into COLO state only with
enabled capability and can't disable it while we are in COLO state. So
substitute the error by simple assertion.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230428194928.1426370-10-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
have_colo_incoming_thread variable is unused. colo_incoming_thread can
be local.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20230428194928.1426370-6-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We don't allow to use x-colo capability when replication is not
configured. So, no reason to build COLO when replication is disabled,
it's unusable in this case.
Note also that the check in migrate_caps_check() is not the only
restriction: some functions in migration/colo.c will just abort if
called with not defined CONFIG_REPLICATION, for example:
migration_iteration_finish()
case MIGRATION_STATUS_COLO:
migrate_start_colo_process()
colo_process_checkpoint()
abort()
It could probably make sense to have possibility to enable COLO without
REPLICATION, but this requires deeper audit of colo & replication code,
which may be done later if needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230428194928.1426370-4-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Commit fe904ea824 added a fail_inactivate label, which tries to
reactivate disks on the source after a failure while s->state ==
MIGRATION_STATUS_ACTIVE, but didn't actually use the label if
qemu_savevm_state_complete_precopy() failed. This failure to
reactivate is also present in commit 6039dd5b1c (also covering the new
s->state == MIGRATION_STATUS_DEVICE state) and 403d18ae (ensuring
s->block_inactive is set more reliably).
Consolidate the two labels back into one - no matter HOW migration is
failed, if there is any chance we can reach vm_start() after having
attempted inactivation, it is essential that we have tried to restart
disks before then. This also makes the cleanup more like
migrate_fd_cancel().
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230502205212.134680-1-eblake@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes compress with colo.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
So make everything that uses it uint64_t no int64_t.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230504113841.23130-2-quintela@redhat.com>
migration_stats is just too long, and it is going to have more than
ram counters in the near future.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
There is already include/qemu/stats.h, so stats.h was a bad idea.
We want this file to not depend on anything else, we will move all the
migration counters/stats to this struct.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
As we set its value, it needs to be operated with atomics.
We rename it from remaining to better reflect its meaning.
Statistics always return the real reamaining bytes. This was used to
store how much pages where dirty on the previous generation, so we can
calculate the expected downtime as: dirty_bytes_last_sync /
current_bandwith.
If we use the actual remaining bytes, we would see a very small value
at the end of the iteration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
I am open to use ram_bytes_remaining() in its only use and be more
"optimistic" about the downtime.
Don't use __nocheck() functions.
Use stat64_get() now that it exists.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
---
Don't use __nocheck() variants
Use stat64_get()
This makes the function more regular with everything else.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
