Place data_start/data_end calculation after reading the image header
to s->header. Set s->data_start to the offset calculated in
parallels_test_data_off(). Call bdrv_check() if data_off is incorrect.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
data_off field of the parallels image header can be corrupted. Check if
this field greater than the header + BAT size and less than file size.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
bdrv_co_getlength() should be used in coroutine context. Replace
bdrv_getlength() by bdrv_co_getlength() in parallels_check_outside_image().
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Repair an image at opening if the image is unclean or out-of-image
corruption was detected.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Cluster offsets must be unique among all the BAT entries. Find duplicate
offsets in the BAT and fix it by copying the content of the relevant
cluster to a newly allocated cluster and set the new cluster offset to the
duplicated entry.
Add host_cluster_index() helper to deduplicate the code.
When new clusters are allocated, the file size increases by 128 Mb. Call
parallels_check_leak() to fix this leak.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
In the next patch we will need the offset of the data area for host cluster
index calculation. Add this field and setting up code.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
In the on of the next patches we need to repair leaks without changing
leaks and leaks_fixed info in res. Also we don't want to print any warning
about leaks. Add "explicit" argument to skip info changing if the argument
is false.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Initially data_end is set to the data_off image header field and must not
be greater than the file size.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
The BDRVParallelsState structure contains data_end field that is measured
in sectors. In parallels_open() initially this field is set by data_off
field from parallels image header.
According to the parallels format documentation, data_off field contains
an offset, in sectors, from the start of the file to the start of the
data area. For "WithoutFreeSpace" images: if data_off is zero, the offset
is calculated as the end of the BAT table plus some padding to ensure
sector size alignment.
The parallels_open() function has code for handling zero value in
data_off, but in the result data_end contains the offset in bytes.
Replace the alignment to sector size by division by sector size and fix
the comparision with s->header_size.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
This patch is technically necessary as git patch rendering could result
in moving some code from one place to the another and that hits
checkpatch.pl warning. This problem specifically happens within next
series.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis V. Lunev <den@openvz.org>
When target image is using subclusters, and we align the request during
copy-on-read, it makes sense to align to subcluster_size rather than
cluster_size. Otherwise we end up with unnecessary allocations.
This commit renames bdrv_round_to_clusters() to bdrv_round_to_subclusters()
and utilizes subcluster_size field of BlockDriverInfo to make necessary
alignments. It affects copy-on-read as well as mirror job (which is
using bdrv_round_to_clusters()).
This change also fixes the following bug with failing assert (covered by
the test in the subsequent commit):
qemu-img create -f qcow2 base.qcow2 64K
qemu-img create -f qcow2 -o extended_l2=on,backing_file=base.qcow2,backing_fmt=qcow2 img.qcow2 64K
qemu-io -c "write -P 0xaa 0 2K" img.qcow2
qemu-io -C -c "read -P 0x00 2K 62K" img.qcow2
qemu-io: ../block/io.c:1236: bdrv_co_do_copy_on_readv: Assertion `skip_bytes < pnum' failed.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230711172553.234055-3-andrey.drobyshev@virtuozzo.com>
This is going to be used in the subsequent commit as requests alignment
(in particular, during copy-on-read). This value only makes sense for
the formats which support subclusters (currently QCOW2 only). If this
field isn't set by driver's own bdrv_get_info() implementation, we
simply set it equal to the cluster size thus treating each cluster as
having a single subcluster.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230711172553.234055-2-andrey.drobyshev@virtuozzo.com>
We duplicate the same condition three times here, pull it out to the top
level.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230824155345.109765-5-hreitz@redhat.com>
Reviewed-by: Sam Li <faithilikerun@gmail.com>
We must check that zone information is present before running
update_zones_wp().
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2234374
Fixes: Coverity CID 1512459
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230824155345.109765-4-hreitz@redhat.com>
Reviewed-by: Sam Li <faithilikerun@gmail.com>
Instead of checking bs->wps or bs->bl.zone_size for whether zone
information is present, check bs->bl.zoned. That is the flag that
raw_refresh_zoned_limits() reliably sets to indicate zone support. If
it is set to something other than BLK_Z_NONE, other values and objects
like bs->wps and bs->bl.zone_size must be non-null/zero and valid; if it
is not, we cannot rely on their validity.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230824155345.109765-3-hreitz@redhat.com>
Reviewed-by: Sam Li <faithilikerun@gmail.com>
bs->bl.zoned is what indicates whether the zone information is present
and valid; it is the only thing that raw_refresh_zoned_limits() sets if
CONFIG_BLKZONED is not defined, and it is also the only thing that it
sets if CONFIG_BLKZONED is defined, but there are no zones.
Make sure that it is always set to BLK_Z_NONE if there is an error
anywhere in raw_refresh_zoned_limits() so that we do not accidentally
announce zones while our information is incomplete or invalid.
This also fixes a memory leak in the last error path in
raw_refresh_zoned_limits().
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230824155345.109765-2-hreitz@redhat.com>
Reviewed-by: Sam Li <faithilikerun@gmail.com>
'bool is_write' style is obsolete from throttle framework, adapt
block throttle groups to the new style:
- use ThrottleDirection instead of 'bool is_write'. Ex,
schedule_next_request(ThrottleGroupMember *tgm, bool is_write)
-> schedule_next_request(ThrottleGroupMember *tgm, ThrottleDirection direction)
- use THROTTLE_MAX instead of hard code. Ex, ThrottleGroupMember *tokens[2]
-> ThrottleGroupMember *tokens[THROTTLE_MAX]
- use ThrottleDirection instead of hard code on iteration. Ex, (i = 0; i < 2; i++)
-> for (dir = THROTTLE_READ; dir < THROTTLE_MAX; dir++)
Use a simple python script to test the new style:
#!/usr/bin/python3
import subprocess
import random
import time
commands = ['virsh blkdeviotune jammy vda --write-bytes-sec ', \
'virsh blkdeviotune jammy vda --write-iops-sec ', \
'virsh blkdeviotune jammy vda --read-bytes-sec ', \
'virsh blkdeviotune jammy vda --read-iops-sec ']
for loop in range(1, 1000):
time.sleep(random.randrange(3, 5))
command = commands[random.randrange(0, 3)] + str(random.randrange(0, 1000000))
subprocess.run(command, shell=True, check=True)
This works fine.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230728022006.1098509-10-pizhenwei@bytedance.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
enum ThrottleDirection is already there, use ThrottleDirection instead
of 'bool is_write' for throttle API, also modify related codes from
block, fsdev, cryptodev and tests.
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230728022006.1098509-7-pizhenwei@bytedance.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
As Hanna pointed out, it is not clear in the code why qemu_open()
can fail, and why blkio_set_int("fd") is not enough to discover
the `fd` property support.
Let's fix them by adding more details in the code comments.
Suggested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230803082825.25293-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
libblkio drivers take ownership of `fd` only after a successful
blkio_connect(), so if it fails, we are still the owners.
Fixes: cad2ccc395 ("block/blkio: use qemu_open() to support fd passing for virtio-blk")
Suggested-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-id: 20230803082825.25293-2-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Please include these bug fixes in QEMU 8.1. Thanks!
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmTCzPUACgkQnKSrs4Gr
c8g1DAf/fPUQ4zRsCn079pHIyK9TFo4COm23p4kiusxj8otfjt8LH1Zsc9pGWC2+
bl2RlnPID8JlyJFDRN7b/RCEhj45a83GtCmhDDmqVgy1eO5vwOKm2XyyWeD+pq/U
Hf2QLPLZZ7tCD8Njpty+gB3Ux4zqthKGXSg8FpJ3w0tl4me2efLvjMa6jHMwtnHT
aAbyQ3WMpT9w4XHLqRQDHzBqrTSY4od3nl9SrM/DQ2klLIcz8ECTEZVBY9B3pq6m
QvAg24tfb0QvS14YnZv/PMCfOaVuE87M9G4f93pCynnMxMYze+XczL0sGhIAS9wp
03NgGlhGumOix6r2kHjlG6p3xywV8A==
=jMf8
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
Please include these bug fixes in QEMU 8.1. Thanks!
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmTCzPUACgkQnKSrs4Gr
# c8g1DAf/fPUQ4zRsCn079pHIyK9TFo4COm23p4kiusxj8otfjt8LH1Zsc9pGWC2+
# bl2RlnPID8JlyJFDRN7b/RCEhj45a83GtCmhDDmqVgy1eO5vwOKm2XyyWeD+pq/U
# Hf2QLPLZZ7tCD8Njpty+gB3Ux4zqthKGXSg8FpJ3w0tl4me2efLvjMa6jHMwtnHT
# aAbyQ3WMpT9w4XHLqRQDHzBqrTSY4od3nl9SrM/DQ2klLIcz8ECTEZVBY9B3pq6m
# QvAg24tfb0QvS14YnZv/PMCfOaVuE87M9G4f93pCynnMxMYze+XczL0sGhIAS9wp
# 03NgGlhGumOix6r2kHjlG6p3xywV8A==
# =jMf8
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 27 Jul 2023 01:00:53 PM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
block/blkio: use blkio_set_int("fd") to check fd support
block/blkio: fall back on using `path` when `fd` setting fails
block/blkio: retry blkio_connect() if it fails using `fd`
block/blkio: move blkio_connect() in the drivers functions
block: Fix pad_request's request restriction
block/file-posix: fix g_file_get_contents return path
block/blkio: do not use open flags in qemu_open()
block/blkio: enable the completion eventfd
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Setting the `fd` property fails with virtio-blk-* libblkio drivers
that do not support fd passing since
https://gitlab.com/libblkio/libblkio/-/merge_requests/208.
Getting the `fd` property, on the other hand, always succeeds for
virtio-blk-* libblkio drivers even when they don't support fd passing.
This patch switches to setting the `fd` property because it is a
better mechanism for probing fd passing support than getting the `fd`
property.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230727161020.84213-5-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu_open() fails if called with an unix domain socket in this way:
-blockdev node-name=drive0,driver=virtio-blk-vhost-user,path=vhost-user-blk.sock,cache.direct=on: Could not open 'vhost-user-blk.sock': No such device or address
Since virtio-blk-vhost-user does not support fd passing, let`s always fall back
on using `path` if we fail the fd passing.
Fixes: cad2ccc395 ("block/blkio: use qemu_open() to support fd passing for virtio-blk")
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230727161020.84213-4-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
libblkio 1.3.0 added support of "fd" property for virtio-blk-vhost-vdpa
driver. In QEMU, starting from commit cad2ccc395 ("block/blkio: use
qemu_open() to support fd passing for virtio-blk") we are using
`blkio_get_int(..., "fd")` to check if the "fd" property is supported
for all the virtio-blk-* driver.
Unfortunately that property is also available for those driver that do
not support it, such as virtio-blk-vhost-user.
So, `blkio_get_int()` is not enough to check whether the driver supports
the `fd` property or not. This is because the virito-blk common libblkio
driver only checks whether or not `fd` is set during `blkio_connect()`
and fails with -EINVAL for those transports that do not support it
(all except vhost-vdpa for now).
So let's handle the `blkio_connect()` failure, retrying it using `path`
directly.
Fixes: cad2ccc395 ("block/blkio: use qemu_open() to support fd passing for virtio-blk")
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230727161020.84213-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is in preparation for the next patch, where for virtio-blk
drivers we need to handle the failure of blkio_connect().
Let's also rename the *_open() functions to *_connect() to make
the code reflect the changes applied.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230727161020.84213-2-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_pad_request() relies on requests' lengths not to exceed SIZE_MAX,
which bdrv_check_qiov_request() does not guarantee.
bdrv_check_request32() however will guarantee this, and both of
bdrv_pad_request()'s callers (bdrv_co_preadv_part() and
bdrv_co_pwritev_part()) already run it before calling
bdrv_pad_request(). Therefore, bdrv_pad_request() can safely call
bdrv_check_request32() without expecting error, too.
In effect, this patch will not change guest-visible behavior. It is a
clean-up to tighten a condition to match what is guaranteed by our
callers, and which exists purely to show clearly why the subsequent
assertion (`assert(*bytes <= SIZE_MAX)`) is always true.
Note there is a difference between the interfaces of
bdrv_check_qiov_request() and bdrv_check_request32(): The former takes
an errp, the latter does not, so we can no longer just pass
&error_abort. Instead, we need to check the returned value. While we
do expect success (because the callers have already run this function),
an assert(ret == 0) is not much simpler than just to return an error if
it occurs, so let us handle errors by returning them up the stack now.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-id: 20230714085938.202730-1-hreitz@redhat.com
Fixes: 18743311b8
("block: Collapse padded I/O vecs exceeding IOV_MAX")
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The g_file_get_contents() function returns a g_boolean. If it fails, the
returned value will be 0 instead of -1. Solve the issue by skipping
assigning ret value.
This issue was found by Matthew Rosato using virtio-blk-{pci,ccw} backed
by an NVMe partition e.g. /dev/nvme0n1p1 on s390x.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230727115844.8480-1-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu_open() in blkio_virtio_blk_common_open() is used to open the
character device (e.g. /dev/vhost-vdpa-0 or /dev/vfio/vfio) or in
the future eventually the unix socket.
In all these cases we cannot open the path in read-only mode,
when the `read-only` option of blockdev is on, because the exchange
of IOCTL commands for example will fail.
In order to open the device read-only, we have to use the `read-only`
property of the libblkio driver as we already do in blkio_file_open().
Fixes: cad2ccc395 ("block/blkio: use qemu_open() to support fd passing for virtio-blk")
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2225439
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20230726074807.14041-1-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Until libblkio 1.3.0, virtio-blk drivers had completion eventfd
notifications enabled from the start, but from the next releases
this is no longer the case, so we have to explicitly enable them.
In fact, the libblkio documentation says they could be disabled,
so we should always enable them at the start if we want to be
sure to get completion eventfd notifications:
By default, the driver might not generate completion events for
requests so it is necessary to explicitly enable the completion
file descriptor before use:
void blkioq_set_completion_fd_enabled(struct blkioq *q, bool enable);
I discovered this while trying a development version of libblkio:
the guest kernel hangs during boot, while probing the device.
Fixes: fd66dbd424 ("blkio: add libblkio block driver")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230725103744.77343-1-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Our code relies on a sentinel cookie value of zero for deciding when a
packet has been handled, as well as relying on array indices between 0
and MAX_NBD_REQUESTS-1 for dereferencing purposes. As long as we can
symmetrically convert between two forms, there is no reason to go with
the odd choice of using XOR with a random pointer, when we can instead
simplify the mappings with a mere offset of 1.
Using ((uint64_t)-1) as the sentinel instead of NULL such that the two
macros could be entirely eliminated might also be possible, but would
require a more careful audit to find places where we currently rely on
zero-initialization to be interpreted as the sentinel value, so I did
not pursue that course.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20230608135653.2918540-7-eblake@redhat.com>
[eblake: enhance commit message]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Externally, libnbd exposed the 64-bit opaque marker for each client
NBD packet as the "cookie", because it was less confusing when
contrasted with 'struct nbd_handle *' holding all libnbd state. It
also avoids confusion between the noun 'handle' as a way to identify a
packet and the verb 'handle' for reacting to things like signals.
Upstream NBD changed their spec to favor the name "cookie" based on
libnbd's recommendations[1], so we can do likewise.
[1] https://github.com/NetworkBlockDevice/nbd/commit/ca4392eb2b
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20230608135653.2918540-6-eblake@redhat.com>
[eblake: typo fix]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
blk_io_plug_call() is invoked outside a blk_io_plug()/blk_io_unplug()
section while opening the NVMe drive from:
nvme_file_open() ->
nvme_init() ->
nvme_identify() ->
nvme_admin_cmd_sync() ->
nvme_submit_command() ->
blk_io_plug_call()
blk_io_plug_call() immediately invokes the given callback when the
current thread is not plugged, as is the case during nvme_file_open().
Unfortunately, nvme_submit_command() calls blk_io_plug_call() with
q->lock still held:
...
q->sq.tail = (q->sq.tail + 1) % NVME_QUEUE_SIZE;
q->need_kick++;
blk_io_plug_call(nvme_unplug_fn, q);
qemu_mutex_unlock(&q->lock);
^^^^^^^^^^^^^^^^^^^^^^^^^^^
nvme_unplug_fn() deadlocks trying to acquire q->lock because the lock is
already acquired by the same thread. The symptom is that QEMU hangs
during startup while opening the NVMe drive.
Fix this by moving the blk_io_plug_call() outside q->lock. This is safe
because no other thread runs code related to this queue and
blk_io_plug_call()'s internal state is immune to thread safety issues
since it is thread-local.
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Lukas Doktor <ldoktor@redhat.com>
Message-id: 20230712191628.252806-1-stefanha@redhat.com
Fixes: f2e590002b ("block/nvme: convert to blk_io_plug_call() API")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When QEMU is built with --enable-modules, the module_block.py script
parses block/*.c to find block drivers that are built as modules. The
script generates a table of block drivers called block_driver_modules[].
This table is used for block driver module loading.
The blkio.c driver uses macros to define its BlockDriver structs. This
was done to avoid code duplication but the module_block.py script is
unable to parse the macro. The result is that libblkio-based block
drivers can be built as modules but will not be found at runtime.
One fix is to make the module_block.py script or build system fancier so
it can parse C macros (e.g. by parsing the preprocessed source code). I
chose not to do this because it raises the complexity of the build,
making future issues harder to debug.
Keep things simple: use the macro to avoid duplicating BlockDriver
function pointers but define .format_name and .protocol_name manually
for each BlockDriver. This way the module_block.py is able to parse the
code.
Also get rid of the block driver name macros (e.g. DRIVER_IO_URING)
because module_block.py cannot parse them either.
Fixes: fd66dbd424 ("blkio: add libblkio block driver")
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230704123436.187761-1-stefanha@redhat.com
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- Re-enable the graph lock
- More fixes to coroutine_fn marking
-----BEGIN PGP SIGNATURE-----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=ZQcP
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- Re-enable the graph lock
- More fixes to coroutine_fn marking
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmScQCQRHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9bNSA//WIzPT45rFhl2U9QgyOJu26ho6ahsgwgI
# Z3QM5kCDB1dAN9USRPxhGboLGo8CyY7eeSwSrR7RtwBGYrWrAoJfGp5gK/7d9s5Q
# o0AGgRPnJGhFkBhRRMytsDsewM6Kk4IRmk4HMK3cOH3rsSM8RHs6KmDSBKesllu0
# QVGf3qW4u8LHyZyGM5OlPVUbtuDuK6/52FGhpXBp+x4oyNegOhjwO4mGOvTG+xIk
# Q5zwWZaPfjxaEDkvW8iahB6/D7Tpt64BmMf1Ydhxcd5eKEp932CiBI36aAlNKoRD
# Al5wztRx1GEh12ekN39jIi7Ypp3JX26keJcieKU0q656pT551UFRYjU0Rk08/Cca
# qv2oiQDu6bHgQ9zCQ1nMfa9+K2MyBwx0b5qfYkvs2RzgCTl8ImgBQANHfw8tz6Bq
# HUo1zsFBXCaK0boUB5iFwdf3rlx3t9UTEuDej/RaHqZjZD5xeG/smCcOlSfHaKUa
# wXfYxvm8ZfefJn1D6io1A+7M956uvIQNtmh13cU44clgFX9Y/bBNMg/5lMRsJKo8
# xxjvqCAyxo/pPfUsVWx4pc8AXbfVa85gyoSiaLEYZnqP54sJ2lFccqykCsTy58Lo
# VDcoPnoSc+LNqBOvtzxXgQbEWFCXU6fe0+TZgVYUvExWFIAOImeDWg2GD1JVrwsX
# e9QrPhL3DXg=
# =ZQcP
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 28 Jun 2023 04:13:56 PM CEST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (23 commits)
block: use bdrv_co_debug_event in coroutine context
block: use bdrv_co_getlength in coroutine context
qcow2: mark more functions as coroutine_fns and GRAPH_RDLOCK
vhdx: mark more functions as coroutine_fns and GRAPH_RDLOCK
vmdk: mark more functions as coroutine_fns and GRAPH_RDLOCK
dmg: mark more functions as coroutine_fns and GRAPH_RDLOCK
cloop: mark more functions as coroutine_fns and GRAPH_RDLOCK
block: mark another function as coroutine_fns and GRAPH_UNLOCKED
bochs: mark more functions as coroutine_fns and GRAPH_RDLOCK
vpc: mark more functions as coroutine_fns and GRAPH_RDLOCK
qed: mark more functions as coroutine_fns and GRAPH_RDLOCK
file-posix: remove incorrect coroutine_fn calls
Revert "graph-lock: Disable locking for now"
graph-lock: Unlock the AioContext while polling
blockjob: Fix AioContext locking in block_job_add_bdrv()
block: Fix AioContext locking in bdrv_open_backing_file()
block: Fix AioContext locking in bdrv_open_inherit()
block: Fix AioContext locking in bdrv_reopen_parse_file_or_backing()
block: Fix AioContext locking in bdrv_attach_child_common()
block: Fix AioContext locking in bdrv_open_child()
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
bdrv_co_debug_event was recently introduced, with bdrv_debug_event
becoming a wrapper for use in unknown context. Because most of the
time bdrv_debug_event is used on a BdrvChild via the wrapper macro
BLKDBG_EVENT, introduce a similar macro BLKDBG_CO_EVENT that calls
bdrv_co_debug_event, and switch whenever possible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-13-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_co_getlength was recently introduced, with bdrv_getlength becoming
a wrapper for use in unknown context. Switch to bdrv_co_getlength when
possible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-12-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark functions as coroutine_fn when they are only called by other coroutine_fns
and they can suspend. Change calls to co_wrappers to use the non-wrapped
functions, which in turn requires adding GRAPH_RDLOCK annotations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-11-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark functions as coroutine_fn when they are only called by other coroutine_fns
and they can suspend. Change calls to co_wrappers to use the non-wrapped
functions, which in turn requires adding GRAPH_RDLOCK annotations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-10-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark functions as coroutine_fn when they are only called by other coroutine_fns
and they can suspend. Change calls to co_wrappers to use the non-wrapped
functions, which in turn requires adding GRAPH_RDLOCK annotations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-9-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark functions as coroutine_fn when they are only called by other coroutine_fns
and they can suspend. Change calls to co_wrappers to use the non-wrapped
functions, which in turn requires adding GRAPH_RDLOCK annotations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-8-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark functions as coroutine_fn when they are only called by other coroutine_fns
and they can suspend. Change calls to co_wrappers to use the non-wrapped
functions, which in turn requires adding GRAPH_RDLOCK annotations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-7-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark functions as coroutine_fn when they are only called by other coroutine_fns
and they can suspend. Change calls to co_wrappers to use the non-wrapped
functions, which in turn requires adding GRAPH_RDLOCK annotations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-5-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark functions as coroutine_fn when they are only called by other coroutine_fns
and they can suspend. Change calls to co_wrappers to use the non-wrapped
functions, which in turn requires adding GRAPH_RDLOCK annotations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-4-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark functions as coroutine_fn when they are only called by other coroutine_fns
and they can suspend. Change calls to co_wrappers to use the non-wrapped
functions, which in turn requires adding GRAPH_RDLOCK annotations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-3-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
raw_co_getlength is called by handle_aiocb_write_zeroes, which is not a coroutine
function. This is harmless because raw_co_getlength does not actually suspend,
but in the interest of clarity make it a non-coroutine_fn that is just wrapped
by the coroutine_fn raw_co_getlength. Likewise, check_cache_dropped was only
a coroutine_fn because it called raw_co_getlength, so it can be made non-coroutine
as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-2-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that bdrv_graph_wrlock() temporarily drops the AioContext lock that
its caller holds, it can poll without causing deadlocks. We can now
re-enable graph locking.
This reverts commit ad128dff0bf4b6f971d05eb4335a627883a19c1d.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230605085711.21261-12-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the caller keeps the AioContext lock for a block node in an iothread,
polling in bdrv_graph_wrlock() deadlocks if the condition isn't
fulfilled immediately.
Now that all callers make sure to actually have the AioContext locked
when they call bdrv_replace_child_noperm() like they should, we can
change bdrv_graph_wrlock() to take a BlockDriverState whose AioContext
lock the caller holds (NULL if it doesn't) and unlock it temporarily
while polling.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230605085711.21261-11-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Slave/master nomenclature was replaced with backend/frontend in commit
1fc19b6527 ("vhost-user: Adopt new backend naming")
This patch replaces all remaining uses of master and slave in the
codebase.
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230613080849.2115347-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When we for example have a sparse qcow2 image and discard: unmap is enabled,
there can be a lot of fragmentation in the image after some time. Especially on VM's
that do a lot of writes/deletes.
This causes the qcow2 image to grow even over 110% of its virtual size,
because the free gaps in the image get too small to allocate new
continuous clusters. So it allocates new space at the end of the image.
Disabling discard is not an option, as discard is needed to keep the
incremental backup size as low as possible. Without discard, the
incremental backups would become large, as qemu thinks it's just dirty
blocks but it doesn't know the blocks are unneeded.
So we need to avoid fragmentation but also 'empty' the unneeded blocks in
the image to have a small incremental backup.
In addition, we also want to send the discards further down the stack, so
the underlying blocks are still discarded.
Therefor we introduce a new qcow2 option "discard-no-unref".
When setting this option to true, discards will no longer have the qcow2
driver relinquish cluster allocations. Other than that, the request is
handled as normal: All clusters in range are marked as zero, and, if
pass-discard-request is true, it is passed further down the stack.
The only difference is that the now-zero clusters are preallocated
instead of being unallocated.
This will avoid fragmentation on the qcow2 image.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1621
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Message-Id: <20230605084523.34134-2-jean-louis@dupond.be>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
All the offsets in the BAT must be lower than the file size.
Fix the check condition for correct check.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20230424093147.197643-13-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Replace the way we use mutex in parallels_co_check() for simplier
and less error prone code.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20230424093147.197643-12-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
We will add more and more checks so we need a better code structure
in parallels_co_check. Let each check performs in a separate loop
in a separate helper.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230424093147.197643-11-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
We will add more and more checks so we need a better code structure
in parallels_co_check. Let each check performs in a separate loop
in a separate helper.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Message-Id: <20230424093147.197643-10-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Exclude out-of-image clusters from allocated and fragmented clusters
calculation.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Message-Id: <20230424093147.197643-9-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
We will add more and more checks so we need a better code structure in
parallels_co_check. Let each check performs in a separate loop in a
separate helper.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20230424093147.197643-8-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
We will add more and more checks so we need a better code structure
in parallels_co_check. Let each check performs in a separate loop
in a separate helper.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230424093147.197643-7-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
BAT is written in the context of conventional operations over the image
inside bdrv_co_flush() when it calls parallels_co_flush_to_os() callback.
Thus we should not modify BAT array directly, but call
parallels_set_bat_entry() helper and bdrv_co_flush() further on. After
that there is no need to manually write BAT and track its modification.
This makes code more generic and allows to split parallels_set_bat_entry()
for independent pieces.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20230424093147.197643-6-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
This helper will be reused in next patches during parallels_co_check
rework to simplify its code.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230424093147.197643-5-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Set data_end to the end of the last cluster inside the image. In such a
way we can be sure that corrupted offsets in the BAT can't affect on the
image size. If there are no allocated clusters set image_end_offset by
data_end.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20230424093147.197643-4-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Don't let high_off be more than the file size even if we don't fix the
image.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230424093147.197643-3-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
data_end field in BDRVParallelsState is set to the biggest offset present
in BAT. If this offset is outside of the image, any further write will
create the cluster at this offset and/or the image will be truncated to
this offset on close. This is definitely not correct.
Raise an error in parallels_open() if data_end points outside the image
and it is not a check (let the check to repaire the image). Set data_end
to the end of the cluster with the last correct offset.
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Message-Id: <20230424093147.197643-2-alexander.ivanov@virtuozzo.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
When processing vectored guest requests that are not aligned to the
storage request alignment, we pad them by adding head and/or tail
buffers for a read-modify-write cycle.
The guest can submit I/O vectors up to IOV_MAX (1024) in length, but
with this padding, the vector can exceed that limit. As of
4c002cef0e ("util/iov: make
qemu_iovec_init_extended() honest"), we refuse to pad vectors beyond the
limit, instead returning an error to the guest.
To the guest, this appears as a random I/O error. We should not return
an I/O error to the guest when it issued a perfectly valid request.
Before 4c002cef0e, we just made the vector
longer than IOV_MAX, which generally seems to work (because the guest
assumes a smaller alignment than we really have, file-posix's
raw_co_prw() will generally see bdrv_qiov_is_aligned() return false, and
so emulate the request, so that the IOV_MAX does not matter). However,
that does not seem exactly great.
I see two ways to fix this problem:
1. We split such long requests into two requests.
2. We join some elements of the vector into new buffers to make it
shorter.
I am wary of (1), because it seems like it may have unintended side
effects.
(2) on the other hand seems relatively simple to implement, with
hopefully few side effects, so this patch does that.
To do this, the use of qemu_iovec_init_extended() in bdrv_pad_request()
is effectively replaced by the new function bdrv_create_padded_qiov(),
which not only wraps the request IOV with padding head/tail, but also
ensures that the resulting vector will not have more than IOV_MAX
elements. Putting that functionality into qemu_iovec_init_extended() is
infeasible because it requires allocating a bounce buffer; doing so
would require many more parameters (buffer alignment, how to initialize
the buffer, and out parameters like the buffer, its length, and the
original elements), which is not reasonable.
Conversely, it is not difficult to move qemu_iovec_init_extended()'s
functionality into bdrv_create_padded_qiov() by using public
qemu_iovec_* functions, so that is what this patch does.
Because bdrv_pad_request() was the only "serious" user of
qemu_iovec_init_extended(), the next patch will remove the latter
function, so the functionality is not implemented twice.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2141964
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230411173418.19549-3-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
It's already confusing that we have two very similar functions for
wrapping the parse of a 64-bit unsigned value, differing mainly on
whether they permit leading '-'. Adjust the signature of parse_uint()
and parse_uint_full() to be like all of qemu_strto*(): put the result
parameter last, use the same types (uint64_t and unsigned long long
have the same width, but are not always the same type), and mark
endptr const (this latter change only affects the rare caller of
parse_uint). Adjust all callers in the tree.
While at it, note that since cutils.c already includes:
QEMU_BUILD_BUG_ON(sizeof(int64_t) != sizeof(long long));
we are guaranteed that the result of parse_uint* cannot exceed
UINT64_MAX (or the build would have failed), so we can drop
pre-existing dead comparisons in opts-visitor.c that were never false.
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-8-eblake@redhat.com>
[eblake: Drop dead code spotted by Markus]
Signed-off-by: Eric Blake <eblake@redhat.com>
Some virtio-blk drivers (e.g. virtio-blk-vhost-vdpa) supports the fd
passing. Let's expose this to the user, so the management layer
can pass the file descriptor of an already opened path.
If the libblkio virtio-blk driver supports fd passing, let's always
use qemu_open() to open the `path`, so we can handle fd passing
from the management layer through the "/dev/fdset/N" special path.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230530071941.8954-2-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
No block driver implements .bdrv_co_io_plug() anymore. Get rid of the
function pointers.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20230530180959.1108766-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stop using the .bdrv_co_io_plug() API because it is not multi-queue
block layer friendly. Use the new blk_io_plug_call() API to batch I/O
submission instead.
Note that a dev_max_batch check is dropped in laio_io_unplug() because
the semantics of unplug_fn() are different from .bdrv_co_unplug():
1. unplug_fn() is only called when the last blk_io_unplug() call occurs,
not every time blk_io_unplug() is called.
2. unplug_fn() is per-thread, not per-BlockDriverState, so there is no
way to get per-BlockDriverState fields like dev_max_batch.
Therefore this condition cannot be moved to laio_unplug_fn(). It is not
obvious that this condition affects performance in practice, so I am
removing it instead of trying to come up with a more complex mechanism
to preserve the condition.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230530180959.1108766-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stop using the .bdrv_co_io_plug() API because it is not multi-queue
block layer friendly. Use the new blk_io_plug_call() API to batch I/O
submission instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20230530180959.1108766-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stop using the .bdrv_co_io_plug() API because it is not multi-queue
block layer friendly. Use the new blk_io_plug_call() API to batch I/O
submission instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20230530180959.1108766-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stop using the .bdrv_co_io_plug() API because it is not multi-queue
block layer friendly. Use the new blk_io_plug_call() API to batch I/O
submission instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20230530180959.1108766-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce a new API for thread-local blk_io_plug() that does not
traverse the block graph. The goal is to make blk_io_plug() multi-queue
friendly.
Instead of having block drivers track whether or not we're in a plugged
section, provide an API that allows them to defer a function call until
we're unplugged: blk_io_plug_call(fn, opaque). If blk_io_plug_call() is
called multiple times with the same fn/opaque pair, then fn() is only
called once at the end of the function - resulting in batching.
This patch introduces the API and changes blk_io_plug()/blk_io_unplug().
blk_io_plug()/blk_io_unplug() no longer require a BlockBackend argument
because the plug state is now thread-local.
Later patches convert block drivers to blk_io_plug_call() and then we
can finally remove .bdrv_co_io_plug() once all block drivers have been
converted.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20230530180959.1108766-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
All callers now pass is_external=false to aio_set_fd_handler() and
aio_set_event_notifier(). The aio_disable_external() API that
temporarily disables fd handlers that were registered is_external=true
is therefore dead code.
Remove aio_disable_external(), aio_enable_external(), and the
is_external arguments to aio_set_fd_handler() and
aio_set_event_notifier().
The entire test-fdmon-epoll test is removed because its sole purpose was
testing aio_disable_external().
Parts of this patch were generated using the following coccinelle
(https://coccinelle.lip6.fr/) semantic patch:
@@
expression ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque;
@@
- aio_set_fd_handler(ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque)
+ aio_set_fd_handler(ctx, fd, io_read, io_write, io_poll, io_poll_ready, opaque)
@@
expression ctx, notifier, is_external, io_read, io_poll, io_poll_ready;
@@
- aio_set_event_notifier(ctx, notifier, is_external, io_read, io_poll, io_poll_ready)
+ aio_set_event_notifier(ctx, notifier, io_read, io_poll, io_poll_ready)
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-21-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is part of ongoing work to remove the aio_disable_external() API.
Use BlockDevOps .drained_begin/end/poll() instead of
aio_set_fd_handler(is_external=true).
As a side-effect the FUSE export now follows AioContext changes like the
other export types.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-16-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The FUSE export calls blk_exp_ref/unref() without the AioContext lock.
Instead of fixing the FUSE export, adjust blk_exp_ref/unref() so they
work without the AioContext lock. This way it's less error-prone.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-15-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vduse_blk_detach_ctx() waits for in-flight requests using
AIO_WAIT_WHILE(). This is not allowed according to a comment in
bdrv_set_aio_context_commit():
/*
* Take the old AioContex when detaching it from bs.
* At this point, new_context lock is already acquired, and we are now
* also taking old_context. This is safe as long as bdrv_detach_aio_context
* does not call AIO_POLL_WHILE().
*/
Use this opportunity to rewrite the drain code in vduse-blk:
- Use the BlockExport refcount so that vduse_blk_exp_delete() is only
called when there are no more requests in flight.
- Implement .drained_poll() so in-flight request coroutines are stopped
by the time .bdrv_detach_aio_context() is called.
- Remove AIO_WAIT_WHILE() from vduse_blk_detach_ctx() to solve the
.bdrv_detach_aio_context() constraint violation. It's no longer
needed due to the previous changes.
- Always handle the VDUSE file descriptor, even in drained sections. The
VDUSE file descriptor doesn't submit I/O, so it's safe to handle it in
drained sections. This ensures that the VDUSE kernel code gets a fast
response.
- Suspend virtqueue fd handlers in .drained_begin() and resume them in
.drained_end(). This eliminates the need for the
aio_set_fd_handler(is_external=true) flag, which is being removed from
QEMU.
This is a long list but splitting it into individual commits would
probably lead to git bisect failures - the changes are all related.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-14-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For simplicity, always run BlockDevOps .drained_begin/end/poll()
callbacks in the main loop thread. This makes it easier to implement the
callbacks and avoids extra locks.
Move the function pointer declarations from the I/O Code section to the
Global State section for BlockDevOps, BdrvChildClass, and BlockDriver.
Narrow IO_OR_GS_CODE() to GLOBAL_STATE_CODE() where appropriate.
The test-bdrv-drain test case calls bdrv_drain() from an IOThread. This
is now only allowed from coroutine context, so update the test case to
run in a coroutine.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-11-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BlockBackend quiesce_counter is greater than zero during drained
sections. Add an API to check whether the BlockBackend is in a drained
section.
The next patch will use this API.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-10-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vhost-user activity must be suspended during bdrv_drained_begin/end().
This prevents new requests from interfering with whatever is happening
in the drained section.
Previously this was done using aio_set_fd_handler()'s is_external
argument. In a multi-queue block layer world the aio_disable_external()
API cannot be used since multiple AioContext may be processing I/O, not
just one.
Switch to BlockDevOps->drained_begin/end() callbacks.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-8-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Each vhost-user-blk request runs in a coroutine. When the BlockBackend
enters a drained section we need to enter a quiescent state. Currently
any in-flight requests race with bdrv_drained_begin() because it is
unaware of vhost-user-blk requests.
When blk_co_preadv/pwritev()/etc returns it wakes the
bdrv_drained_begin() thread but vhost-user-blk request processing has
not yet finished. The request coroutine continues executing while the
main loop thread thinks it is in a drained section.
One example where this is unsafe is for blk_set_aio_context() where
bdrv_drained_begin() is called before .aio_context_detached() and
.aio_context_attach(). If request coroutines are still running after
bdrv_drained_begin(), then the AioContext could change underneath them
and they race with new requests processed in the new AioContext. This
could lead to virtqueue corruption, for example.
(This example is theoretical, I came across this while reading the
code and have not tried to reproduce it.)
It's easy to make bdrv_drained_begin() wait for in-flight requests: add
a .drained_poll() callback that checks the VuServer's in-flight counter.
VuServer just needs an API that returns true when there are requests in
flight. The in-flight counter needs to be atomic.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-7-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The VuServer object has a refcount field and ref/unref APIs. The name is
confusing because it's actually an in-flight request counter instead of
a refcount.
Normally a refcount destroys the object upon reaching zero. The VuServer
counter is used to wake up the vhost-user coroutine when there are no
more requests.
Avoid confusing by renaming refcount and ref/unref to in_flight and
inc/dec.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-6-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk_set_aio_context() is not fully transactional because
blk_do_set_aio_context() updates blk->ctx outside the transaction. Most
of the time this goes unnoticed but a BlockDevOps.drained_end() callback
that invokes blk_get_aio_context() fails assert(ctx == blk->ctx). This
happens because blk->ctx is only assigned after
BlockDevOps.drained_end() is called and we're in an intermediate state
where BlockDrvierState nodes already have the new context and the
BlockBackend still has the old context.
Making blk_set_aio_context() fully transactional solves this assertion
failure because the BlockBackend's context is updated as part of the
transaction (before BlockDevOps.drained_end() is called).
Split blk_do_set_aio_context() in order to solve this assertion failure.
This helper function actually serves two different purposes:
1. It drives blk_set_aio_context().
2. It responds to BdrvChildClass->change_aio_ctx().
Get rid of the helper function. Do #1 inside blk_set_aio_context() and
do #2 inside blk_root_set_aio_ctx_commit(). This simplifies the code.
The only drawback of the fully transactional approach is that
blk_set_aio_context() must contend with blk_root_set_aio_ctx_commit()
being invoked as part of the AioContext change propagation. This can be
solved by temporarily setting blk->allow_aio_context_change to true.
Future patches call blk_get_aio_context() from
BlockDevOps->drained_end(), so this patch will become necessary.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The AioContext lock must not be held for bdrv_open_child(), but it is
necessary for the following operations, in particular those using nested
event loops in coroutine wrappers.
Temporarily dropping the main AioContext lock is not necessary because
we know we run in the main thread.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230525124713.401149-9-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When opening the 'file' child moves bs to an iothread, we need to hold
the AioContext lock of it before we can call raw_apply_options() (and
more specifically, bdrv_getlength() inside of it).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230525124713.401149-8-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_open() doesn't work correctly when opening the 'file' child moves
bs to an iothread, for several reasons:
- It uses BDRV_POLL_WHILE() to wait for the qcow2_open_entry()
coroutine, which involves dropping the AioContext lock for bs when it
is not in the main context - but we don't hold it, so this crashes.
- It runs the qcow2_open_entry() coroutine in the current thread instead
of the new AioContext of bs.
- qcow2_open_entry() doesn't notify the main loop when it's done.
This patches fixes these issues around delegating work to a coroutine.
Temporarily dropping the main AioContext lock is not necessary because
we know we run in the main thread.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230525124713.401149-7-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_open_backing_file() calls bdrv_open_inherit(), so all callers must
hold the main AioContext lock.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230525124713.401149-6-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes blk_new_open() to not assume that bs is in the main context.
In particular, the BlockBackend must be created with the right
AioContext because it will refuse to move to a different context
afterwards. (blk->allow_aio_context_change is false.)
Use this opportunity to use blk_insert_bs() instead of duplicating the
bdrv_root_attach_child() call. This is consistent with what
blk_new_with_bs() does. Add comments to document the locking rules.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230525124713.401149-5-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The function documentation already says that all callers must hold the
main AioContext lock, but not all of them do. This can cause assertion
failures when functions called by bdrv_open() try to drop the lock. Fix
a few more callers to take the lock before calling bdrv_open().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230525124713.401149-4-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All of the functions that currently take a BlockDriverState, BdrvChild
or BlockBackend as their first parameter expect the associated
AioContext to be locked when they are called. In the case of
no_co_wrappers, they are called from bottom halves directly in the main
loop, so no other caller can be expected to take the lock for them. This
can result in assertion failures because a lock that isn't taken is
released in nested event loops.
Looking at the first parameter is already done by co_wrappers to decide
where the coroutine should run, so doing the same in no_co_wrappers is
only consistent. Take the lock in the generated bottom halves to fix the
problem.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230525124713.401149-2-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In QEMU 8.0, we've been seeing deadlocks in bdrv_graph_wrlock(). They
come from callers that hold an AioContext lock, which is not allowed
during polling. In theory, we could temporarily release the lock, but
callers are inconsistent about whether they hold a lock, and if they do,
some are also confused about which one they hold. While all of this is
fixable, it's not trivial, and the best course of action for 8.0.1 is
probably just disabling the graph locking code temporarily.
We don't currently rely on graph locking yet. It is supposed to replace
the AioContext lock eventually to enable multiqueue support, but as long
as we still have the AioContext lock, it is sufficient without the graph
lock. Once the AioContext lock goes away, the deadlock doesn't exist any
more either and this commit can be reverted. (Of course, it can also be
reverted while the AioContext lock still exists if the callers have been
fixed.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230517152834.277483-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are some conditions under which we don't actually need to do
anything for taking a reader lock: Writing the graph is only possible
from the main context while holding the BQL. So if a reader is running
in the main context under the BQL and knows that it won't be interrupted
until the next writer runs, we don't actually need to do anything.
This is the case if the reader code neither has a nested event loop
(this is forbidden anyway while you hold the lock) nor is a coroutine
(because a writer could run when the coroutine has yielded).
These conditions are exactly what bdrv_graph_rdlock_main_loop() asserts.
They are not fulfilled in bdrv_graph_co_rdlock(), which always runs in a
coroutine.
This deletes the shortcuts in bdrv_graph_co_rdlock() that skip taking
the reader lock in the main thread.
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-9-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When jobs are sleeping, for example to enforce a given rate limit, they
can be reentered early, in particular in order to get paused, to update
the rate limit or to get cancelled.
Before this patch, they behave in this case as if they had fully
completed their rate limiting delay. This means that requests are sped
up beyond their limit, violating the constraints that the user gave us.
Change the block jobs to sleep in a loop until the necessary delay is
completed, while still allowing cancelling them immediately as well
pausing (handled by the pause point in job_sleep_ns()) and updating the
rate limit.
This change is also motivated by iotests cases being prone to fail
because drain operations pause and unpause them so often that block jobs
complete earlier than they are supposed to. In particular, the next
commit would fail iotests 030 without this change.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-8-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_do_open() calls a few no_co_wrappers that wrap functions taking
the graph lock internally as a writer. Therefore, it can't hold the
reader lock across these calls, it causes deadlocks. Drop the lock
temporarily around the calls.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-4-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are some error paths in blk_exp_add() that jump to 'fail:' before
'exp' is even created. So we can't just unconditionally access exp->blk.
Add a NULL check, and switch from exp->blk to blk, which is available
earlier, just to be extra sure that we really cover all cases where
BlockDevOps could have been set for it (in practice, this only happens
in drv->create() today, so this part of the change isn't strictly
necessary).
Fixes: Coverity CID 1509238
Fixes: de79b52604
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-3-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are functions that modify the graph, so they must be able to take
a writer lock. This is impossible if they already hold the reader lock.
If they need a reader lock for some of their operations, they should
take it internally.
Many of them go through blk_*(), which will always take the lock itself.
Direct calls of bdrv_*() need to take the reader lock. Note that while
locking for bdrv_co_*() calls is checked by TSA, this is not the case
for the mixed_coroutine_fns bdrv_*(). Holding the lock is still required
when they are called from coroutine context like here!
This effectively reverts 4ec8df0183, but adds some internal locking
instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Taking account of the new zone append write operation for zoned devices,
BLOCK_ACCT_ZONE_APPEND enum is introduced as other I/O request type (read,
write, flush).
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051916.178322-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508051510.177850-5-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A zone append command is a write operation that specifies the first
logical block of a zone as the write position. When writing to a zoned
block device using zone append, the byte offset of the call may point at
any position within the zone to which the data is being appended. Upon
completion the device will respond with the position where the data has
been written in the zone.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508051510.177850-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since Linux doesn't have a user API to issue zone append operations to
zoned devices from user space, the file-posix driver is modified to add
zone append emulation using regular writes. To do this, the file-posix
driver tracks the wp location of all zones of the device. It uses an
array of uint64_t. The most significant bit of each wp location indicates
if the zone type is conventional zones.
The zones wp can be changed due to the following operations issued:
- zone reset: change the wp to the start offset of that zone
- zone finish: change to the end location of that zone
- write to a zone
- zone append
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051510.177850-2-faithilikerun@gmail.com
[Fix errno propagation from handle_aiocb_zone_mgmt()
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-8-faithilikerun@gmail.com
Message-id: 20230324090605.28361-8-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Putting zoned/non-zoned BlockDrivers on top of each other is not
allowed.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-6-faithilikerun@gmail.com
Message-id: 20230324090605.28361-6-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org> and clarify that the check is about zoned
BlockDrivers.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
raw-format driver usually sits on top of file-posix driver. It needs to
pass through requests of zone commands.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-5-faithilikerun@gmail.com
Message-id: 20230324090605.28361-5-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add zoned device option to host_device BlockDriver. It will be presented only
for zoned host block devices. By adding zone management operations to the
host_block_device BlockDriver, users can use the new block layer APIs
including Report Zone and four zone management operations
(open, close, finish, reset, reset_all).
Qemu-io uses the new APIs to perform zoned storage commands of the device:
zone_report(zrp), zone_open(zo), zone_close(zc), zone_reset(zrs),
zone_finish(zf).
For example, to test zone_report, use following command:
$ ./build/qemu-io --image-opts -n driver=host_device, filename=/dev/nullb0
-c "zrp offset nr_zones"
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-4-faithilikerun@gmail.com
Message-id: 20230324090605.28361-4-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org> and remove spurious ret = -errno in
raw_co_zone_mgmt().
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use get_sysfs_str_val() to get the string value of device
zoned model. Then get_sysfs_zoned_model() can convert it to
BlockZoneModel type of QEMU.
Use get_sysfs_long_val() to get the long value of zoned device
information.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-3-faithilikerun@gmail.com
Message-id: 20230324090605.28361-3-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
reader_count() is a performance bottleneck because the global
aio_context_list_lock mutex causes thread contention. Put this debugging
assertion behind a new ./configure --enable-debug-graph-lock option and
disable it by default.
The --enable-debug-graph-lock option is also enabled by the more general
--enable-debug option.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230501173443.153062-1-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_refresh_limits() need to hold a reader lock for the graph because
it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-21-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_recurse_can_replace() need to hold a reader lock for the graph
because it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-20-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_query_bds_stats() need to hold a reader lock for the graph because
it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-18-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of amend
callbacks in BlockDriver need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-17-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_get_info() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-15-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_get_allocated_file_size() need to hold a reader lock for the
graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230504115750.54437-14-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that functions accessing
the parent list of a node need to hold a reader lock for the graph. As
it happens, they already do.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230504115750.54437-13-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that functions accessing
the parent list of a node need to hold a reader lock for the graph. As
it happens, they already do.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-12-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
nbd_co_do_establish_connection() need to hold a reader lock for the
graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-11-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The only thing nbd_co_flush() does is call nbd_client_co_flush(). Just
use that function directly in the BlockDriver definitions and remove the
wrapper.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-10-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drivers were a bit confused about whether .bdrv_open can run in a
coroutine and whether or not it holds a graph lock.
It cannot keep a graph lock from the caller across the whole function
because it both changes the graph (requires a writer lock) and does I/O
(requires a reader lock). Therefore, it should take these locks
internally as needed.
The functions used to be called in coroutine context during image
creation. This was buggy for other reasons, and as of commit 32192301,
all block drivers go through no_co_wrappers. So it is not called in
coroutine context any more.
Fix qcow2 and qed to work with the correct assumptions: The graph lock
needs to be taken internally instead of just assuming it's already
there, and the coroutine path is dead code that can be removed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-9-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These functions must not be called in coroutine context, because they
need write access to the graph.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Migration code can call bdrv_activate() in coroutine context, whereas
other callers call it outside of coroutines. As it calls other code that
is not supposed to run in coroutines, standardise on running outside of
coroutines.
This adds a no_co_wrapper to switch to the main loop before calling
bdrv_activate().
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is a bdrv_co_getlength() now, which should be used in coroutine
context.
This requires adding GRAPH_RDLOCK to some functions so that this still
compiles with TSA because bdrv_co_getlength() is GRAPH_RDLOCK.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After the recent introduction of many new coroutine callbacks,
a couple calls from non-coroutine_fn to coroutine_fn have sneaked
in; fix them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230406101752.242125-1-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Let's add --enable / --disable configure options for these formats,
so that those who don't need them may not build them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230421092758.814122-1-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most export types install BlockDeviceOps pointers. It is easy to forget
to remove them because that happens automatically via the "drive" qdev
property in hw/ but not block/export/.
Put blk_set_dev_ops(blk, NULL, NULL) calls in the core export.c code so
the export types don't need to remember.
This fixes the nbd and vhost-user-blk export types.
Fixes: fd6afc501a ("nbd/server: Use drained block ops to quiesce the server")
Fixes: ca858a5fe9 ("vhost-user-blk-server: notify client about disk resize")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230502211119.720647-1-stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
- Protect BlockBackend.queued_requests with its own lock
- Switch to AIO_WAIT_WHILE_UNLOCKED() where possible
- AioContext removal: LinuxAioState/LuringState/ThreadPool
- Add more coroutine_fn annotations, use bdrv/blk_co_*
- Fix crash when execute hmp_commit
-----BEGIN PGP SIGNATURE-----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=mpYX
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- Protect BlockBackend.queued_requests with its own lock
- Switch to AIO_WAIT_WHILE_UNLOCKED() where possible
- AioContext removal: LinuxAioState/LuringState/ThreadPool
- Add more coroutine_fn annotations, use bdrv/blk_co_*
- Fix crash when execute hmp_commit
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmRH0b0RHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9Y0yw/6A/vzA4TGgFUP3WIvH/sQri4/V3gyR+PT
# u3hOQUCYZ99nioTpKV91TSuUPuU/Mdspy/0NKM+K92yIXqxa9172A2zLOsGOu21l
# qKpse+nBf1zqEgB8YzUHyCBdetPz916C/f9RS26SNUCW85GCHYGHA3u7nKvWLMyV
# oKIoTlA8QOglOuEKlRoYh7hCFm7ET51NOSEftm8GsYbsW/I2Vzl8a1SHN1lHufjd
# We3+898zUrmFqNMp6Rjdhn+yZmmoGzoZqV4YQi83z7xjiv+Ms4VHVVW7X8d20xRX
# 5BLFiLHAuZ/1d26HyVhgBUr7KHyf94odocz8BylWKXGl5SXMCZun1Td1vgVKlGK+
# GRxzB2cWGWqzC2UmqSTc0Z0aIWbXukKwvcX76uBKsQZ+kB2A7jFobxHiaoQEDJ8B
# WRNEMH2+CqCAu9rsrNRinnJKhT2nXcr9F9YfwRIlagdAePGWin+EUW8huf14dDBm
# Z2Y34aKW4RQibF8xirMHeRBbOLmcq2VpKLKwNfBHUDgZB8iuD7bLn4n9nwWXMG1w
# zgNsTybkv46vLPamTpEaUoNTHfuRDTAuE7Z7lkcc7jF41Z0V1DC/DCCWcL/0LvhP
# GIxFdkYug3hetdF2U/OZhUoEfxvkqcuBnrr55LFzqheKEllQpPwPpt7UF0aH8bg3
# i/YpjHsf3xU=
# =mpYX
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Apr 2023 02:12:29 PM BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (25 commits)
block/monitor: Fix crash when executing HMP commit
vmdk: make vmdk_is_cid_valid a coroutine_fn
qcow2: mark various functions as coroutine_fn and GRAPH_RDLOCK
tests: mark more coroutine_fns
qemu-pr-helper: mark more coroutine_fns
9pfs: mark more coroutine_fns
nbd: mark more coroutine_fns, do not use co_wrappers
mirror: make mirror_flush a coroutine_fn, do not use co_wrappers
blkdebug: add missing coroutine_fn annotation
vvfat: mark various functions as coroutine_fn
thread-pool: avoid passing the pool parameter every time
thread-pool: use ThreadPool from the running thread
io_uring: use LuringState from the running thread
linux-aio: use LinuxAioState from the running thread
block: add missing coroutine_fn to bdrv_sum_allocated_file_size()
include/block: fixup typos
monitor: convert monitor_cleanup() to AIO_WAIT_WHILE_UNLOCKED()
hmp: convert handle_hmp_command() to AIO_WAIT_WHILE_UNLOCKED()
block: convert bdrv_drain_all_begin() to AIO_WAIT_WHILE_UNLOCKED()
block: convert bdrv_graph_wrlock() to AIO_WAIT_WHILE_UNLOCKED()
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
hmp_commit() calls blk_is_available() from a non-coroutine context (and
in the main loop). blk_is_available() is a co_wrapper_mixed_bdrv_rdlock
function, and in the non-coroutine context it calls AIO_WAIT_WHILE(),
which crashes if the aio_context lock is not taken before.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1615
Signed-off-by: Wang Liang <wangliangzz@inspur.com>
Message-Id: <20230424103902.45265-1-wangliangzz@126.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Functions that can do I/O are prime candidates for being coroutine_fns. Make the
change for the one that is itself called only from coroutine_fns. Unfortunately
vmdk does not use a coroutine_fn for the bulk of the open (like qcow2 does) so
vmdk_read_cid cannot have the same treatment.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230309084456.304669-10-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Functions that can do I/O (including calling bdrv_is_allocated
and bdrv_block_status functions) are prime candidates for being
coroutine_fns. Make the change for those that are themselves called
only from coroutine_fns. Also annotate that they are called with the
graph rdlock taken, thus allowing them to call bdrv_co_*() functions
for I/O.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230309084456.304669-9-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
mirror_flush calls a mixed function blk_flush but it is only called
from mirror_run; so call the coroutine version and make mirror_flush
a coroutine_fn too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230309084456.304669-4-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230309084456.304669-3-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Functions that can do I/O are prime candidates for being coroutine_fns. Make the
change for those that are themselves called only from coroutine_fns.
In addition, coroutine_fns should do I/O using bdrv_co_*() functions, for
which it is required to hold the BlockDriverState graph lock. So also nnotate
functions on the I/O path with TSA attributes, making it possible to
switch them to use bdrv_co_*() functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230309084456.304669-2-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
thread_pool_submit_aio() is always called on a pool taken from
qemu_get_current_aio_context(), and that is the only intended
use: each pool runs only in the same thread that is submitting
work to it, it can't run anywhere else.
Therefore simplify the thread_pool_submit* API and remove the
ThreadPool function parameter.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-5-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use qemu_get_current_aio_context() where possible, since we always
submit work to the current thread anyways.
We want to also be sure that the thread submitting the work is
the same as the one processing the pool, to avoid adding
synchronization to the pool list.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-4-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove usage of aio_context_acquire by always submitting asynchronous
AIO to the current thread's LuringState.
In order to prevent mistakes from the caller side, avoid passing LuringState
in luring_io_{plug/unplug} and luring_co_submit, and document the functions
to make clear that they work in the current thread's AioContext.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-3-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove usage of aio_context_acquire by always submitting asynchronous
AIO to the current thread's LinuxAioState.
In order to prevent mistakes from the caller side, avoid passing LinuxAioState
in laio_io_{plug/unplug} and laio_co_submit, and document the functions
to make clear that they work in the current thread's AioContext.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-2-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since the AioContext argument was already NULL, AIO_WAIT_WHILE() was
never going to unlock the AioContext. Therefore it is possible to
replace AIO_WAIT_WHILE() with AIO_WAIT_WHILE_UNLOCKED().
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230309190855.414275-5-stefanha@redhat.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following conversion is safe and does not change behavior:
GLOBAL_STATE_CODE();
...
- AIO_WAIT_WHILE(qemu_get_aio_context(), ...);
+ AIO_WAIT_WHILE_UNLOCKED(NULL, ...);
Since we're in GLOBAL_STATE_CODE(), qemu_get_aio_context() is our home
thread's AioContext. Thus AIO_WAIT_WHILE() does not unlock the
AioContext:
if (ctx_ && in_aio_context_home_thread(ctx_)) { \
while ((cond)) { \
aio_poll(ctx_, true); \
waited_ = true; \
} \
And that means AIO_WAIT_WHILE_UNLOCKED(NULL, ...) can be substituted.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230309190855.414275-4-stefanha@redhat.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no change in behavior. Switch to AIO_WAIT_WHILE_UNLOCKED()
instead of AIO_WAIT_WHILE() to document that this code has already been
audited and converted. The AioContext argument is already NULL so
aio_context_release() is never called anyway.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230309190855.414275-3-stefanha@redhat.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no need for the AioContext lock in bdrv_drain_all() because
nothing in AIO_WAIT_WHILE() needs the lock and the condition is atomic.
AIO_WAIT_WHILE_UNLOCKED() has no use for the AioContext parameter other
than performing a check that is nowadays already done by the
GLOBAL_STATE_CODE()/IO_CODE() macros. Set the ctx argument to NULL here
to help us keep track of all converted callers. Eventually all callers
will have been converted and then the argument can be dropped entirely.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230309190855.414275-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The CoQueue API offers thread-safety via the lock argument that
qemu_co_queue_wait() and qemu_co_enter_next() take. BlockBackend
currently does not make use of the lock argument. This means that
multiple threads submitting I/O requests can corrupt the CoQueue's
QSIMPLEQ.
Add a QemuMutex and pass it to CoQueue APIs so that the queue is
protected. While we're at it, also assert that the queue is empty when
the BlockBackend is deleted.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230307210427.269214-4-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This field is accessed by multiple threads without a lock. Use explicit
qatomic_read()/qatomic_set() calls. There is no need for acquire/release
because blk_set_disable_request_queuing() doesn't provide any
guarantees (it helps that it's used at BlockBackend creation time and
not when there is I/O in flight).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230307210427.269214-3-stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The main loop thread increments/decrements BlockBackend->quiesce_counter
when drained sections begin/end. The counter is read in the I/O code
path. Therefore this field is used to communicate between threads
without a lock.
Acquire/release are not necessary because the BlockBackend->in_flight
counter already uses sequentially consistent accesses and running I/O
requests hold that counter when blk_wait_while_drained() is called.
qatomic_read() can be used.
Use qatomic_fetch_inc()/qatomic_fetch_dec() for modifications even
though sequentially consistent atomic accesses are not strictly required
here. They are, however, nicer to read than multiple calls to
qatomic_read() and qatomic_set(). Since beginning and ending drain is
not a hot path the extra cost doesn't matter.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230307210427.269214-2-stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mostly just fixes, cleanups all over the place.
Some optimizations.
More control over slot_reserved_mask.
More feature bits supported for SVQ.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRHQvAPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpQc0H/RD+RXy7IAnmhkdCyjj0hM8pftPTwCJfrSCW
DLHP4c5jiKO5ngUoAv3YJdM77TBCXlJn6gceeKBrzhGUTtJ7dTLC+Udeq/jW43EF
/E2ldLLbTNFyUqW8yX7D+EVio7Jy4zXTHpczKCF5vO7MaVWS/b3QdCpmjXpEHLNb
janv24vQHHgmRwK96uIdIauJJT8aqYW0arn1po8anxuFS8ok9Tf8LTEF5uBHokJP
MriTwMaqMgRK+4rzh+b6wc7QC5GqIr44gFrsfFYuNOUY0+BizvGvUAtMt+B/XZwt
OF4RSShUh2bhsQoYwgvShfEsR/vWwOl3yMAhcsB+wMgMzMG8MUQ=
=e8DF
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes, features, cleanups
Mostly just fixes, cleanups all over the place.
Some optimizations.
More control over slot_reserved_mask.
More feature bits supported for SVQ.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRHQvAPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpQc0H/RD+RXy7IAnmhkdCyjj0hM8pftPTwCJfrSCW
# DLHP4c5jiKO5ngUoAv3YJdM77TBCXlJn6gceeKBrzhGUTtJ7dTLC+Udeq/jW43EF
# /E2ldLLbTNFyUqW8yX7D+EVio7Jy4zXTHpczKCF5vO7MaVWS/b3QdCpmjXpEHLNb
# janv24vQHHgmRwK96uIdIauJJT8aqYW0arn1po8anxuFS8ok9Tf8LTEF5uBHokJP
# MriTwMaqMgRK+4rzh+b6wc7QC5GqIr44gFrsfFYuNOUY0+BizvGvUAtMt+B/XZwt
# OF4RSShUh2bhsQoYwgvShfEsR/vWwOl3yMAhcsB+wMgMzMG8MUQ=
# =e8DF
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Apr 2023 04:03:12 AM BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (31 commits)
hw/pci-bridge: Make PCIe and CXL PXB Devices inherit from TYPE_PXB_DEV
hw/pci-bridge: pci_expander_bridge fix type in pxb_cxl_dev_reset()
docs/specs: Convert pci-testdev.txt to rst
docs/specs: Convert pci-serial.txt to rst
docs/specs/pci-ids: Convert from txt to rST
acpi: pcihp: allow repeating hot-unplug requests
virtio: i2c: Check notifier helpers for VIRTIO_CONFIG_IRQ_IDX
docs: Remove obsolete descriptions of SR-IOV support
intel_iommu: refine iotlb hash calculation
docs/cxl: Fix sentence
MAINTAINERS: Add Eugenio Pérez as vhost-shadow-virtqueue reviewer
tests: bios-tables-test: replace memset with initializer
hw/acpi: limit warning on acpi table size to pc machines older than version 2.3
Add my old and new work email mapping and use work email to support acpi
vhost-user-blk-server: notify client about disk resize
pci: avoid accessing slot_reserved_mask directly outside of pci.c
hw: Add compat machines for 8.1
hw/i386/amd_iommu: Factor amdvi_pci_realize out of amdvi_sysbus_realize
hw/i386/amd_iommu: Set PCI static/const fields via PCIDeviceClass
hw/i386/amd_iommu: Move capab_offset from AMDVIState to AMDVIPCIState
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce the BdrvDmgUncompressFunc type defintion. To emphasis
dmg_uncompress_bz2 and dmg_uncompress_lzfse are pointer to functions,
declare them using this new typedef.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230320152610.32052-1-philmd@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently block_resize qmp command is simply ignored by vhost-user-blk
export. So, the block-node is successfully resized, but virtio config
is unchanged and guest doesn't see that disk is resized.
Let's handle the resize by modifying the config and notifying the guest
appropriately.
After this comment, lsblk in linux guest with attached
vhost-user-blk-pci device shows new size immediately after block_resize
QMP command on vhost-user exported block node.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230321201323.3695923-1-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is already a barrier in AIO_WAIT_WHILE_INTERNAL(), thus the
qatomic_mb_read() is not adding anything.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the former nfs_get_allocated_file_size is now a coroutine
function, it must suspend rather than poll. Switch BDRV_POLL_WHILE()
to a qemu_coroutine_yield() loop and schedule nfs_co_generic_bh_cb()
in place of the call to bdrv_wakeup().
Fixes: 82618d7bc3 ("block: Convert bdrv_get_allocated_file_size() to co_wrapper", 2023-02-01)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230412112606.80983-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The introduction of the graph lock is causing blk_get_geometry, a hot function
used in the I/O path, to create a coroutine. However, the only part that really
needs to run in coroutine context is the call to bdrv_co_refresh_total_sectors,
which in turn only happens in the rare case of host CD-ROM devices.
So, write by hand the three wrappers on the path from blk_co_get_geometry to
bdrv_co_refresh_total_sectors, so that the coroutine wrapper is only created
if bdrv_nb_sectors actually calls bdrv_refresh_total_sectors.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-9-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers of blk_co_nb_sectors (and blk_nb_sectors) are able to
handle a non-inserted CD-ROM as a zero-length file, they do not need
to raise an error.
Not using blk_co_is_available() aligns the function with
blk_co_get_geometry(), which becomes a simple wrapper for
blk_co_nb_sectors(). It will also make it possible to skip the creation
of a coroutine in the (common) case where bs->bl.has_variable_length
is false.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-8-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_co_get_geometry is only used in blk_co_get_geometry. Inline it in
there, to reduce the number of wrappers for bs->total_sectors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-7-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fill in the field in BlockLimits directly for host devices, and
copy it from there for the raw format.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-5-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Filters automatically get has_variable_length from their underlying
BlockDriverState. There is no need to mark them as variable-length
in the BlockDriver.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-3-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
At the protocol level, has_variable_length only needs to be true in the
very special case of host CD-ROM drives, so that they do not need an
explicit monitor command to read the new size when a disc is loaded
in the tray.
However, at the format level has_variable_length has to be true for all
raw blockdevs and for all filters, even though in practice the length
depends on the underlying file and thus will not change except in the
case of host CD-ROM drives.
As a first step towards computing an accurate value of has_variable_length,
add the value into the BlockLimits structure and initialize the field
from the BlockDriver.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-2-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The corruption occurs when a BAT entry aligned to 4096 bytes is changed.
Specifically, the corruption occurs during the creation of the LOG Data
Descriptor. The incorrect behavior involves copying 4088 bytes from the
original 4096 bytes aligned offset to `tmp[8..4096]` and then copying
the new value for the first BAT entry to the beginning `tmp[0..8]`.
This results in all existing BAT entries inside the 4K region being
incorrectly moved by 8 bytes and the last entry being lost.
This bug did not cause noticeable corruption when only sequentially
writing once to an empty dynamic VHDX (e.g.
using `qemu-img convert -O vhdx -o subformat=dynamic ...`), but it
still resulted in invalid values for the (unused) Sector Bitmap BAT
entries.
Importantly, this corruption would only become noticeable after the
corrupted BAT is re-read from the file.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/727
Cc: qemu-stable@nongnu.org
Signed-off-by: Lukas Tschoke <lukts330@gmail.com>
Message-Id: <6cfb6d6b-adc5-7772-c8a5-6bae9a0ad668@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When liblzfe (Apple LZFSE compression library) is present
(for example installed via 'brew') on Darwin, QEMU build
fails as:
Has header "lzfse.h" : YES
Library lzfse found: YES
Dependencies
lzo support : NO
snappy support : NO
bzip2 support : YES
lzfse support : YES
zstd support : YES 1.5.2
User defined options
dmg : enabled
lzfse : enabled
[221/903] Compiling C object libblock.fa.p/block_dmg-lzfse.c.o
FAILED: libblock.fa.p/block_dmg-lzfse.c.o
/opt/homebrew/Cellar/lzfse/1.0/include/lzfse.h:56:43: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
LZFSE_API size_t lzfse_encode_scratch_size();
^
void
/opt/homebrew/Cellar/lzfse/1.0/include/lzfse.h:94:43: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
LZFSE_API size_t lzfse_decode_scratch_size();
^
void
2 errors generated.
ninja: build stopped: subcommand failed.
This issue has been reported in the lzfse project in 2016:
https://github.com/lzfse/lzfse/issues/3#issuecomment-226574719
Since the project seems unmaintained, simply ignore the
strict-prototypes warning check for the <lzfse.h> header,
similarly to how we deal with the GtkItemFactoryCallback
prototype from <gtk/gtkitemfactory.h>, indirectly included
by <gtk/gtk.h>.
Cc: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20230327151349.97572-1-philmd@linaro.org>
blk_get_geometry() eventually calls bdrv_nb_sectors(), which is a
co_wrapper_mixed_bdrv_rdlock. This means that when it is called from
coroutine context, it already assume to have the graph locked.
However, virtio_blk_sect_range_ok() in block/export/virtio-blk-handler.c
(used by vhost-user-blk and VDUSE exports) runs in a coroutine, but
doesn't take the graph lock - blk_*() functions are generally expected
to do that internally. This causes an assertion failure when accessing
an export for the first time if it runs in an iothread.
This is an example of the crash:
$ ./storage-daemon/qemu-storage-daemon --object iothread,id=th0 --blockdev file,filename=/home/kwolf/images/hd.img,node-name=disk --export vhost-user-blk,addr.type=unix,addr.path=/tmp/vhost.sock,node-name=disk,id=exp0,iothread=th0
qemu-storage-daemon: ../block/graph-lock.c:268: void assert_bdrv_graph_readable(void): Assertion `qemu_in_main_thread() || reader_count()' failed.
(gdb) bt
#0 0x00007ffff6eafe5c in __pthread_kill_implementation () from /lib64/libc.so.6
#1 0x00007ffff6e5fa76 in raise () from /lib64/libc.so.6
#2 0x00007ffff6e497fc in abort () from /lib64/libc.so.6
#3 0x00007ffff6e4971b in __assert_fail_base.cold () from /lib64/libc.so.6
#4 0x00007ffff6e58656 in __assert_fail () from /lib64/libc.so.6
#5 0x00005555556337a3 in assert_bdrv_graph_readable () at ../block/graph-lock.c:268
#6 0x00005555555fd5a2 in bdrv_co_nb_sectors (bs=0x5555564c5ef0) at ../block.c:5847
#7 0x00005555555ee949 in bdrv_nb_sectors (bs=0x5555564c5ef0) at block/block-gen.c:256
#8 0x00005555555fd6b9 in bdrv_get_geometry (bs=0x5555564c5ef0, nb_sectors_ptr=0x7fffef7fedd0) at ../block.c:5884
#9 0x000055555562ad6d in blk_get_geometry (blk=0x5555564cb200, nb_sectors_ptr=0x7fffef7fedd0) at ../block/block-backend.c:1624
#10 0x00005555555ddb74 in virtio_blk_sect_range_ok (blk=0x5555564cb200, block_size=512, sector=0, size=512) at ../block/export/virtio-blk-handler.c:44
#11 0x00005555555dd80d in virtio_blk_process_req (handler=0x5555564cbb98, in_iov=0x7fffe8003830, out_iov=0x7fffe8003860, in_num=1, out_num=0) at ../block/export/virtio-blk-handler.c:189
#12 0x00005555555dd546 in vu_blk_virtio_process_req (opaque=0x7fffe8003800) at ../block/export/vhost-user-blk-server.c:66
#13 0x00005555557bf4a1 in coroutine_trampoline (i0=-402635264, i1=32767) at ../util/coroutine-ucontext.c:177
#14 0x00007ffff6e75c20 in ?? () from /lib64/libc.so.6
#15 0x00007fffefffa870 in ?? ()
#16 0x0000000000000000 in ?? ()
Fix this by creating a new blk_co_get_geometry() that takes the lock,
and changing blk_get_geometry() to be a co_wrapper_mixed around it.
To make the resulting code cleaner, virtio-blk-handler.c can directly
call the coroutine version now (though that wouldn't be necessary for
fixing the bug, taking the lock in blk_co_get_geometry() is what fixes
it).
Fixes: 8ab8140a04
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230327113959.60071-1-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
This looks like a copy-paste or merge error. BDRV_POLL_WHILE() is
already called above. It's not needed in the qemu_in_coroutine() case.
Fixes: 9fb4dfc570 ("qed: make bdrv_qed_do_open a coroutine_fn")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230309163134.398707-1-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
fallocate(2) says about PUNCH_HOLE: "After a successful call, subsequent
reads from this range will return zeros." As it is, PUNCH_HOLE is
implemented as a call to blk_pdiscard(), which does not guarantee this.
We must call blk_pwrite_zeroes() instead. The difference to ZERO_RANGE
is that we pass the `BDRV_REQ_MAY_UNMAP | BDRV_REQ_NO_FALLBACK` flags to
the call -- the storage is supposed to be unmapped, and a slow fallback
by actually writing zeroes as data is not allowed.
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1507
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230227104725.33511-2-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit 262a69f428 ("osdep.h: Prohibit disabling
assert() in supported builds") 'NDEBUG' can not be defined,
so '#ifndef NDEBUG' is dead code. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230221232520.14480-5-philmd@linaro.org>
Starting from ceph Reef, RBD has built-in support for layered encryption,
where each ancestor image (in a cloned image setting) can be possibly
encrypted using a unique passphrase.
A new function, rbd_encryption_load2, was added to librbd API.
This new function supports an array of passphrases (via "spec" structs).
This commit extends the qemu rbd driver API to use this new librbd API,
in order to support this new layered encryption feature.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Message-Id: <20230129113120.722708-4-oro@oro.sl.cloud9.ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Ceph RBD encryption API required specifying the encryption format
for loading encryption. The supported formats were LUKS (v1) and LUKS2.
Starting from Reef release, RBD also supports loading with "luks-any" format,
which works for both versions of LUKS.
This commit extends the qemu rbd driver API to enable qemu users to use
this luks-any wildcard format.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Message-Id: <20230129113120.722708-3-oro@oro.sl.cloud9.ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Message-Id: <20230129113120.722708-2-oro@oro.sl.cloud9.ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_refresh_total_sectors() need to hold a reader lock for the
graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-24-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_*_dirty_bitmap() need to hold a reader lock for the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-23-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_register_buf() and bdrv_unregister_buf() need to hold a reader lock
for the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-21-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_eject() and bdrv_co_lock_medium() need to hold a reader lock for
the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-20-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_is_inserted() need to hold a reader lock for the graph.
blk_is_inserted() is done as a co_wrapper_mixed_bdrv_rdlock (unlike most
other blk_* functions) because it is called a lot from other blk_co_*()
functions that already hold the lock. These calls go through
blk_is_available(), which becomes a co_wrapper_mixed_bdrv_rdlock, too,
for the same reason.
Functions that run in a coroutine and can call bdrv_co_is_available()
directly are changed to do so, which results in better TSA coverage.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-19-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_io_plug() and bdrv_co_io_unplug() need to hold a reader lock for
the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-18-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_create() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-17-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-16-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_copy_range() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-15-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers are already GRAPH_RDLOCK, so just add the annotation and
remove assume_graph_lock().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-14-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pwrite_sync() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-13-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pread*/pwrite*() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-12-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_driver_*() need to hold a reader lock for the graph. It doesn't add
the annotation to public functions yet.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-11-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pwrite_zeroes() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-10-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pdiscard() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-9-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_flush() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-8-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is called in two different places:
- timer callback, which does not take the graph rdlock.
- bdrv_qed_drain_begin(), which is .bdrv_drain_begin()
callback documented as function that does not take the lock.
Since it calls recursive functions that traverse the
graph, we need to protect them with the graph rdlock.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-7-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_ioctl() need to hold a reader lock for the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-6-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_block_status() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-5-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_truncate() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-4-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_mirror_top_pwritev() accesses the job object when active mirroring
is enabled. It disables this code during early initialisation while
s->job isn't set yet.
However, s->job is still set way too early when the job object isn't
fully initialised. For example, &s->ops_in_flight isn't initialised yet
and the in_flight bitmap doesn't exist yet. This causes crashes when a
write request comes in too early.
Move the assignment of s->job to when the mirror job is actually fully
initialised to make sure that the mirror_top driver doesn't access it
too early.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-3-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
When calling bdrv_getlength() in handle_aiocb_write_zeroes(), the
function creates a new coroutine and then waits that it finishes using
AIO_WAIT_WHILE.
The problem is that this function could also run in a worker thread,
that has a different AioContext from main loop and iothreads, therefore
in AIO_WAIT_WHILE we will have in_aio_context_home_thread(ctx) == false
and therefore
assert(qemu_get_current_aio_context() == qemu_get_aio_context());
in the else branch will fail, crashing QEMU.
Aside from that, bdrv_getlength() is wrong also conceptually, because
it reads the BDS graph from another thread and is not protected by
any lock.
Replace it with raw_co_getlength, that doesn't create a coroutine and
doesn't read the BDS graph.
Reported-by: Ninad Palsule <ninad@linux.vnet.ibm.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230209154522.1164401-1-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* 7.55.0 deprecates CURLINFO_CONTENT_LENGTH_DOWNLOAD in favour of a *_T
version, which returns curl_off_t instead of a double.
* 7.85.0 deprecates CURLOPT_PROTOCOLS and CURLOPT_REDIR_PROTOCOLS in
favour of *_STR variants, specifying the desired protocols via a
string.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1440
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230123201431.23118-1-anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
.bdrv_co_create implementations run in a coroutine. Therefore they are
not allowed to open images directly. Fix the calls to use the
corresponding no_co_wrappers instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-12-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
.bdrv_co_create implementations run in a coroutine. Therefore they are
not allowed to open images directly. Fix the calls to use the
corresponding no_co_wrappers instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-11-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
.bdrv_co_create implementations run in a coroutine. Therefore they are
not allowed to open images directly. Fix the calls to use the
corresponding no_co_wrappers instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-10-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
.bdrv_co_create implementations run in a coroutine. Therefore they are
not allowed to open images directly. Fix the calls to use the
corresponding no_co_wrappers instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-9-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
.bdrv_co_create implementations run in a coroutine. Therefore they are
not allowed to open images directly. Fix the calls to use the
corresponding no_co_wrappers instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-8-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
.bdrv_co_create implementations run in a coroutine, as does
qcow2_do_open(). Therefore they are not allowed to open images directly.
Fix the calls to use the corresponding no_co_wrappers instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-7-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
.bdrv_co_create implementations run in a coroutine. Therefore they are
not allowed to open images directly. Fix the calls to use the
corresponding no_co_wrappers instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-6-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
.bdrv_co_create implementations run in a coroutine. Therefore they are
not allowed to open images directly. Fix the calls to use the
corresponding no_co_wrappers instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-5-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
.bdrv_co_create implementations run in a coroutine. Therefore they are
not allowed to open images directly. Fix the calls to use the
corresponding no_co_wrappers instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-4-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Images can't be opened in coroutine context because opening needs to
change the block graph. Add no_co_wrappers so that coroutines have a
simple way of opening images in a BH instead.
At the same time, mark the wrapped functions as no_coroutine_fn.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-3-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_hash_table_destroy() and g_hash_table_foreach_remove() (called by
curl_drop_all_sockets()) both require the table to be non-NULL, or will
print assertion failures (just print, no abort).
There are several paths in curl_open() that can lead to the out_noclean
label without s->sockets being allocated, so clean it only if it has
been allocated.
Example reproducer:
$ qemu-img info -f http ''
qemu-img: GLib: g_hash_table_foreach_remove: assertion 'hash_table != NULL' failed
qemu-img: GLib: g_hash_table_destroy: assertion 'hash_table != NULL' failed
qemu-img: Could not open '': http curl driver cannot handle the URL '' (does not start with 'http://')
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1475
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230206132949.92917-1-hreitz@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* catch [accel] entry without accelerator
* target/i386: various fixes for BMI and ADX instructions
* make the contents of meson-buildoptions.sh stable
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmPpDTcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroODWAgAhWi0XSBe91+34ahQqx6JoLStNX9e
xy1Cm/5LPDrDquD/4T6gnzb1Min/X2AsVu9c+VIbuHbL/rFc7aNIEL6c7KzwSFLs
vEDF7tSnlIMK0ClDsDYBz7HUIgBgqE2crAJmTJus2Cqd+Ef5bMxhQi5Imrk6qtmO
HRdVYEGasJ7CO50oUB91AMrNInWQw0qBnBOB8TnwTLTcvE1txa+xnZuZgQA2HrGX
OweLdKRcYPvRYvBB3wLMbwqEKbD1eYbdbNt7T2KkuVQpYcgfoCpayHIIMroD+hvu
BImmG9wWieDKH4Brs765gH6/3VF5UZKbgDQo9Wz+W/5QqnqRSsOYBiMkmA==
=G3PN
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* block/iscsi: fix double-free on BUSY or similar statuses
* catch [accel] entry without accelerator
* target/i386: various fixes for BMI and ADX instructions
* make the contents of meson-buildoptions.sh stable
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmPpDTcUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroODWAgAhWi0XSBe91+34ahQqx6JoLStNX9e
# xy1Cm/5LPDrDquD/4T6gnzb1Min/X2AsVu9c+VIbuHbL/rFc7aNIEL6c7KzwSFLs
# vEDF7tSnlIMK0ClDsDYBz7HUIgBgqE2crAJmTJus2Cqd+Ef5bMxhQi5Imrk6qtmO
# HRdVYEGasJ7CO50oUB91AMrNInWQw0qBnBOB8TnwTLTcvE1txa+xnZuZgQA2HrGX
# OweLdKRcYPvRYvBB3wLMbwqEKbD1eYbdbNt7T2KkuVQpYcgfoCpayHIIMroD+hvu
# BImmG9wWieDKH4Brs765gH6/3VF5UZKbgDQo9Wz+W/5QqnqRSsOYBiMkmA==
# =G3PN
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 12 Feb 2023 16:00:55 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
libqtest: ensure waitpid() is only called once
libqtest: split qtest_spawn_qemu function
target/i386: fix ADOX followed by ADCX
target/i386: Fix C flag for BLSI, BLSMSK, BLSR
target/i386: Fix BEXTR instruction
tests/tcg/i386: Introduce and use reg_t consistently
vl: catch [accel] entry without accelerator
block/iscsi: fix double-free on BUSY or similar statuses
remove unnecessary extern "C" blocks
build: make meson-buildoptions.sh stable
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
